download root.rar from link: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
enjoy from your rooted c7pro
if this usefull for you press thanks
(tested in hongkong firmware)
the twrp compiled by me bootup without problem but not mont any partition.i have family and no any time to fix it. anyone can fix it ...
sorry for my bad einglish
موفق باشید.
inanloukarim said:
download root.rar from link: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
Wifi not work after flash the boot file
Click to expand...
Click to collapse
i installed the twrp file and it success but it cannot boot into twrp recovery it can
alagoinhas said:
inanloukarim said:
download root.rar from link: s8.picofile.com/file/8300465700/root.rar.html
extract root.rar you found 4 file in it. please do step by step
1- first go to downloadmod and flash j.tar file by odin. if your phone bootloop do not worry weit 20 second poweroff then go to downloadmod
2- flash boot.tar.md5 by odin
3- restart your phone then inistall supersu2.87.apk
note:if you have problem do factory reset and renistall apk
Wifi not work after flash the boot file
Click to expand...
Click to collapse
i installed the twrp file and it success but it cannot boot into twrp recovery it can boot into normal recovery why ?
Click to expand...
Click to collapse
Related
Hi peeps!
If your trying to install TWRP for your Samsung A5 and are constantly stuck in a TWRP bootloop in an attempt to restart your device, then here is a solution for you!:good:
I am not responsible for any damage to your device!
TWRP: http://forum.xda-developers.com/galaxy-alpha/help/to-port-twrp-to-galaxy-a5-a500fu-t3150843
Stuck in bootloop and don't know how to get out!
Follow these steps:
1. Tap on reboot
2. Tap on download
3. Open ODIN on your computer and load a stock/lollipop rom on the PDA
3. Connect your device and flash the ROM
(Note: doing so will remove root)
Want TWRP very bad but don't want to repeat the process over and over again?
You will need to convert the TWRP.img file to a .md5.tar file so you can flash it via ODIN.
In order to convert it, go here:
http://forum.xda-developers.com/showthread.php?t=2446269
Once converted, flash the file via ODIN.
Thanks to:
@mygalaxya for TWRP
@mkh.mourad for img to tar.md5 converter
Leave a thanks if it helped! Hope it does!
~Cheers
ahmad89098 said:
Hi peeps!
If your trying to install TWRP for your Samsung A5 and are constantly stuck in a TWRP bootloop in an attempt to restart your device, then here is a solution for you!:good:
I am not responsible for any damage to your device!
TWRP: http://forum.xda-developers.com/galaxy-alpha/help/to-port-twrp-to-galaxy-a5-a500fu-t3150843
Stuck in bootloop and don't know how to get out!
Follow these steps:
1. Tap on reboot
2. Tap on download
3. Open ODIN on your computer and load a stock/lollipop rom on the PDA
3. Connect your device and flash the ROM
(Note: doing so will remove root)
Want TWRP very bad but don't want to repeat the process over and over again?
You will need to convert the TWRP.img file to a .md5.tar file so you can flash it via ODIN.
In order to convert it, go here:
http://forum.xda-developers.com/showthread.php?t=2446269
Once converted, flash the file via ODIN.
Thanks to:
@mygalaxya for TWRP
@mkh.mourad for img to tar.md5 converter
Leave a thanks if it helped! Hope it does!
~Cheers
Click to expand...
Click to collapse
to cross bootloop you can install any rom you want via twrp than reboot on download and install cf autoroot
https://autoroot.chainfire.eu/
For NewBie'sHii Today Iam Going To Help All New Users Of Grand 2 SM-G7102,SM-G7105.
BasicIf U Want To Install New Custom Roms Or Any Type Of Custom Rom Then Follow The Steps.
●First You Need A Custom Recovery To Install A Custom Rom Or Any Zip Files
●There Are Many Custom Recovery Available For Grand 2 Both Varients(But I Recommend TWRP).
How To Install Custom Recovery ?●First U Need To Download TWRP Recovery
●The Recovery Should Be In Tar Format(Odin Flashable)
●Then U Need To Download Odin Latest Version(I Added The Files Link Below)
●Then Extract Odin.zip In Desktop And Open Extracted Folder From There
●Now U Need To Access Your Phone Into Download Mode,To Access Download Mode U Need To Press(Volume Down+Home Button+Power Button Together)Then U Will See An Android Icon On Your Screen Press Volume Up Button To Continue,Now Connect Ur Device To Your PC Via An USB Cable.
●Ok Now Last Step Is Open Odin As Administrator By Right Click On Your Mouse.
●Now U Will See That Odin Is Opened And There Are Many Options Like AP,CP,Etc
●Now U Need To Select Ap Option And Find Ur Recovery.tar File Where U Placed It Then Click Start To Start The Installation.(Uncheck Auto Reboot Option If U Are On Stock Rom Means 4.4.2 Kitkat,This Will Bypass install-recovery.sh)
●It Will Take Some Seconds To Complete When U See Pass Message Then Look At Your Phone.
●Now Remove Battery And Reinsert The Battery And Press Volume Up+Home Button+Power Button) To Enter Into Recovery Mode.And U Will See That TWRP Is Written In Your Screen.
Congrats You're Successfully Installed Custom Recovery
How To Install Custom Rom Or Patches ?●First Download The Rom.zip File To Your Internel Storage Or Externel Storage Wherever U Want.
●Then In TWRP Recovery
●Select>Wipe Option Then Tick 4 Options
●Data,Cache,Dalvik-Cache,And System
●Now Install Ur Rom.zip File From Ur Specific Storage Where U Placed The Rom.zip File And Wait For Installation Complete(If There Is No Patch Required For The Rom,Then Follow This Instruction Only)
●And If There Is Any Patch Required To Fix Any Bug Of Any Rom That You're Installing Then All U Need To Do This Just Follow Above Step But Before Start U Select 1 Option Add Zip Files (Which Is Came After U Select Any Zip File),And Select Your Patch Zip For Your Rom,Then Start The Installation.
How To Fix BootLoop On Your Current Rom ?●Bootloop Is An Irritating Bug Of Any Device.
What Is Bootloop ?
●Look You're Using A Rom Such As Stock Or Custom Rom.And U've Powered Off Your Devicr Or U've Selected Restart,And Suddenly U're Saw That You're Phone Is Not Booting Or Stuck At Samsung Galaxy Grand 2 Logo Or In Boot Animation.And Not Booting Or Not Turning Up The Soft Key Lights.
How To Fix Bootloop ?
●If You've Did'nt Flashed Anything Then Select Wipe Dalvik Cache And Cache,After That Reboot Your Phone And Your Phone Will Start Within Some Minutes.
●If U Flashed Something That Is Not Supported By You're Device And U Dont Know What U've Done And U Saw Bootlooping Then Wipe All Partitions
System
Data
Dalvik-Cache
Cache
Then Reflash Your Rom With Patch(If U Remember How To Do This Then Ok Or Otherwise Follow My Step In This Thread Which I've Written Above.
How To Flash A Rom Without Loosing Any Of Your Personal Data Or Apps ?If U Want To Flash A Custom Rom With All Your Personal Data And Apps Then Stay Chilled You're In Right Place.
●First Of All Go To TWRP Recovery Go To Wipe And Select Only System,Cache,Dalvik-Cache Do Not Wipe Data
●Then Flash Your Favourite Custom Rom With Out Loosing Your Apps And Personal Data. :good:
Anirban Ganguly[email protected] Grand 2 duos,Lte(4G) Hit Thanks●If U Need Any Help Then Feel Free To PM Me At Xda.
●More Guides Are Coming Soon.
●Iam Bit Busy In Development,So When I've Free Time I Will Add More.
DownloadsDownloads Link In 3rd Post.
How To Install Boot.img Or Recovery.img Without A Pc ?●First You Will Need To Download Flashify From Play Store
●Open Flashify And Give It A Root Access
●Then Select Flash Img
●Then locate Your Img File Wherever You Placed It And Select Flash
●It Will Automatically Reboot
Thats It For Now More Guides Are Coming Soon
Reserved
DOWNLOADS
●TWRP[ms013g][Grand 2 Duos SM-G7102]
http://forum.xda-developers.com/galaxy-grand-2/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3107535
●Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Anirban Ganguly said:
DOWNLOADS
?TWRP[ms013g][Grand 2 Duos SM-G7102]
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0
?TWRP[ms01lte][Grand 2 LTE SM-G7105]
https://www.dropbox.com/s/8lrh85ps62h2l8l/recovery.tar.md5?dl=0
?Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Click to expand...
Click to collapse
Bro Direct links of others work not allowed in xda... better give their thread link...so that no one will report to mod
....
Ok
Please, how do I flash recovery for Samsung Grand 2 without pc?
Billygent said:
Please, how do I flash recovery for Samsung Grand 2 without pc?
Click to expand...
Click to collapse
only possible only when a existing custom recovery installed on your device,if u want to flash zip but if u want to flash img file then follow my guide which is written above
This thread is really helpful for new users. Thx for this thread, really helpful.
Sincerely, NYT
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Flashing Recovery.IMG without PC
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
It is easy and convinient if you're gonna use this method somehow watch out for the bugs because it may cause u to get stuck on recovery booting or download mode (good news is it wont affect with ur memory).
Use flashify, select the downloaded recovery (Extract when needed) and wait for some few minutes to flash the file.
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
use flashify if you have root
To root without pc,you can use Kingroot
Hi Everyone ! When You have Flashed a custom recovery (TWRP,CMW,PHILLZ...) and also flashed CF Auto-Root, it arrives that you disable the DEVELOPER OPTIONS or OEM UNLOCK by mistake ! Then, when you reboot your phone, you get stuck at boot with this annoying message: 《 CUSTOM BINARY BLOCKED BY FRP LOCK 》which doesn't allow you to boot up your phone ! After trying a lot of methods on different forum,lot of methods requires you to flash stock firmware to get your phone working again ! I finally found a way to solve it and You will not LOOSE YOUR DATA and no need to flash FULL STOCK FIRMWARE. JUST FOLLOW THIS METHOD STEP BY STEP
*REQUIREMENTS
1. STOCK ENG Boot file
2. STOCK Recovery file
3. ODIN.exe
1. Download Stock SM-J510FN ENG Boot file from here : Links removed by mods
2. Download Stock SM-J510FN Recovery file from here :
3. #Put phone in download mode and open odin
#Click on BL and choose the Stock Recovery file you just downloaded
#Click on AP and choose the Stock EN Boot file you downloaded
#Make sure Auto-Reboot and F.Reset Time are checked in odin
#Click on start! It will take less than 1 minutes to to flash the files !
YOUR PHONE SHOULD BOOT NORMALLY:good:
NB: NO LOSS OF DATA
ONLY ROOT WILL BE LOSS
#NOW RE-ENABLE DEVELOPER OPTIONS and OEM UNLOCK and flash again your custom recovery and the CF Auto-Root file to get root permission again !
ENJOY !
i tried it, the phone booted up
but it's bricked
help would be appreciated
Nvssv6 said:
Hi Everyone ! When You have Flashed a custom recovery (TWRP,CMW,PHILLZ...) and also flashed CF Auto-Root, it arrives that you disable the DEVELOPER OPTIONS or OEM UNLOCK by mistake ! Then, when you reboot your phone, you get stuck at boot with this annoying message: 《 CUSTOM BINARY BLOCKED BY FRP LOCK 》which doesn't allow you to boot up your phone ! After trying a lot of methods on different forum,lot of methods requires you to flash stock firmware to get your phone working again ! I finally found a way to solve it and You will not LOOSE YOUR DATA and no need to flash FULL STOCK FIRMWARE. JUST FOLLOW THIS METHOD STEP BY STEP
*REQUIREMENTS
1. STOCK ENG Boot file
2. STOCK Recovery file
3. ODIN.exe
1. Download Stock SM-J510FN ENG Boot file from here : Links removed by mods
2. Download Stock SM-J510FN Recovery file from here :
3. #Put phone in download mode and open odin
#Click on BL and choose the Stock Recovery file you just downloaded
#Click on AP and choose the Stock EN Boot file you downloaded
#Make sure Auto-Reboot and F.Reset Time are checked in odin
#Click on start! It will take less than 1 minutes to to flash the files !
YOUR PHONE SHOULD BOOT NORMALLY:good:
NB: NO LOSS OF DATA
ONLY ROOT WILL BE LOSS
#NOW RE-ENABLE DEVELOPER OPTIONS and OEM UNLOCK and flash again your custom recovery and the CF Auto-Root file to get root permission again !
ENJOY !
Click to expand...
Click to collapse
Thread closed as ppc links not allowed and FRP tutorials are dark areas and guides for thieves
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Problem
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
hossein_vlz1 said:
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
Click to expand...
Click to collapse
1. Download your device boot.img
2. Move to your phone SD Card
3. Install magisk apk
4. now setup you magisk output format as .img.tar
5. now click on install
6. click on patched boot image
7. Now browse you boot.img
8. now wait for success
9. now find "patched_boot.img.tar" and move to your pc
10. reboot your phone into download mode
11. now flash patched boot img with odin
12. now your phone will restart. if it shows reset button on bottom of screen than reset your phone
Done.
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
hossein_vlz1 said:
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
Click to expand...
Click to collapse
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
Flashfire not working.
He says install Magisk 18 again. However, Magisk 18 is not installed again.
alien.baba said:
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
Click to expand...
Click to collapse
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
hossein_vlz1 said:
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
Click to expand...
Click to collapse
now install magisk manually with apk.
your root will done.
Note: you should connected with internet & Yellow triangle will show in boot.
Need Help
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
hi
imranhussain12 said:
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
Click to expand...
Click to collapse
I think
flash twrp via odin. then use twrp to install magisk
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
barinbektas said:
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
Click to expand...
Click to collapse
Biraz daha sabredin. Yakında birşeyler olacak.
Help with Magisk Installation
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
smt_best said:
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
Click to expand...
Click to collapse
flash using Odin. it's petched_boot.img.tar file. you don't need to fo to fastboot go to download mode by pressing Volume Down+Home Button+Power On Key.
J6OOG updated to the last version (android 10)
stucks in boot after flashing TWRP and MAGISK
Is there a way to root it. . . .
NB: Iwas on PIE(9) ..and rooted by magisk. .
THANK's. . .
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
bombername said:
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
Click to expand...
Click to collapse
AP file patched with the same device....
four files flashed with Odin....
For information are you rooted now ?....
Yes, I have root now.
bombername said:
Yes, I have root now.
Click to expand...
Click to collapse
Glad to know that . . .
it worked bro very thanks.
I rooted my device too but only boot.tar used....
Not all AP files...
But I had a problem ... is that I cannot delete system files using link2sd or any other application .... I don't know what the problem is .... if the problem doesn't with you ... please let us know ?
THANKS
Thanks bro, you really help me!
santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
THANKS MAN FINALLY same here 1 month searching finally doing this method works and i guess shold work for every device, just look for your exact rom firmware. and do the same procedure thought Odin paste the AP COPIED FROM MAGISTIK AND YOU ARE ROOTED its workin on Model SAMSUNG j600G PERFECTLY , ANY HELP IM HERE TO HELP
josephpatrick said:
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
Click to expand...
Click to collapse
YES THERE IS A WAY . I HAVE TWRP , MAGISK AND A CUSTOME ROM ANDROID 9 I FOUND HERE WITH AWESOME KERNEL AND OFFICIAL PIE 9 , IM HERE TO HELP