Related
I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app
Hello
A friend gave me a "broken" Xperia Ray.
Here is what seems to not work :
- long press on power button (up on the phone) = nothing
- charging it only makes a Sony Ericsson logo appearing during few seconds then nothing
- pluging it in a USB port on my computer does nothing.
Any idea about which is the problem exactly ?
It became like this after a fall...
Thanks
It seems like it´s softbricked. Try to flash stock FTF in flashmode (phone off, when you´re connecting it to the PC hold the volume down key, and mantain it until the FTF has flashed), connect via Fastboot or via S1Boot, if your phone is dead yet, it´s a hardware damage.
Greetings and a happy 2014.
Don Luciano said:
It seems like it´s softbricked. Try to flash stock FTF in flashmode (phone off, when you´re connecting it to the PC hold the volume down key, and mantain it until the FTF has flashed), connect via Fastboot or via S1Boot, if your phone is dead yet, it´s a hardware damage.
Greetings and a happy 2014.
Click to expand...
Click to collapse
Thanks but I found the answer : pins just above battery were... not in place.
Had to put them back to normal state and now it is ok.
Found the answer in another thread here !
Hello guys,
I have a problem with mai Sony Xperia Z Ultra.
I installed a new softwere on my phone and it don't turn on!! I can't enter in recovery mod.
When i try to turn on the only thing who work is that red LED.
Wath can I do ?
more information is needed
What did you install?
How did you install it?
Have you backed up the TA?
Have you unlocked the bootloader?
If you reset the device (power and vol up) and then connect to a PC while holding the vol up key do you get a blue LED?
Replay
I had installed CM-12 with Android 5.0.
I installed it with Recovery mod.
Yes i have bootloader unlocked+root and yes when I connect to PC i have a blue LED and i did a backup before this
extazz_122 said:
I had installed CM-12 with Android 5.0.
I installed it with Recovery mod.
Yes i have bootloader unlocked+root and yes when I connect to PC i have a blue LED and i did a backup before this
Click to expand...
Click to collapse
Download flashtool http://flashtool.net and read up on how to use it
Download a FTF for your version from http://forum.xda-developers.com/xpe...tf-depository-sony-firmware-releases-t2829387
Charge the phone for several hours on a wall charger
Run flashtool
select flashmode
select FTF
press flash button
wait for instructions
connect ZU to PC while holding the vol. down key
wait for the flash to finish.
That should get you back to stock
Link dosn't work
Hi,
my sony xperia c5 ultra (E5533) has been broken after OTA update , it's not working at all please help me it's my new phone
You will have to enter into download mode or bootload mode and flash an original ROM. To avoid losing your files, flash the same rom that was . No per factoryreset only flash the rom .
maxnuk said:
You will have to enter into download mode or bootload mode and flash an original ROM. To avoid losing your files, flash the same rom that was . No per factoryreset only flash the rom .
Click to expand...
Click to collapse
i tryed but does not work for me it's hard breaked
i will help you. Do you use what program in pc?
maxnuk said:
i will help you. Do you use what program in pc?
Click to expand...
Click to collapse
i am using flash tool also xperia companion
my c5 ultra dual is totally broken it's dead, i have nothing working expect download mode
Install: Sony Mobile Phone // Download your ROM (romxperiac5.ftf) // Download and install FlashTool: http://developer.sonymobile.com/services/flash-tool/
Move your romxperiac5.ftf to "C:/Flashtool/firmwares/".
Go to: "C:/Flashtool/drivers/ " and open flashtool-drivers.exe. Select options: Flashmode Drivers/Fastboot Drivers/ and (Xperia C5 driver, something like for your phone).
Open FlashTool,
Click in Flash device(ray) and Flashmode and OK.
Select your Firmware and Flash.
Turn off the SONY XPERIA
Press and Hold together: Power Button + Volume Down Button for several seconds and Connect the usb OR Press Volume Down and Conect USB, Green light in your phone, release buttons.
http://forum.xda-developers.com/xperia-z/general/guide-how-to-package-flash-stock-roms-t2914567
maxnuk said:
Install: Sony Mobile Phone // Download your ROM (romxperiac5.ftf) // Download and install FlashTool: http://developer.sonymobile.com/services/flash-tool/
Move your romxperiac5.ftf to "C:/Flashtool/firmwares/".
Go to: "C:/Flashtool/drivers/ " and open flashtool-drivers.exe. Select options: Flashmode Drivers/Fastboot Drivers/ and (Xperia C5 driver, something like for your phone).
Open FlashTool,
Turn off the SONY XPERIA (remove the battery and put again).
Press and Hold together: Power Button + Volume Down Button for several seconds and Connect the usb OR Press Volume Down and Conect USB, Green light in your phone Hold buttons.
In Flashtool: Click in Flash device(ray) and Flashmode and OK.
Select your Firmware and Flash.
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
It is normal the screen is black.
Click to expand...
Click to collapse
it says flash delevery missing
this way does not work for sony xperia C5 ultra olso it's internal battery i can't remove it
when you do this procedure with the USB, it lights light?
yes red light and green light
It is to send a print (Flashtool) ?
http://forum.xda-developers.com/xperia-z/general/guide-how-to-package-flash-stock-roms-t2914567
there is only red light then it turns to green light when i press v- while usb cable connected
Press V- and conect usb
i said i did and it gives me green light
kato2050 said:
i said i am did and it gives me green light
Click to expand...
Click to collapse
It send a photo of the error (Flashtool)?
please help me mention experts
maxnuk said:
It send a photo of the error (Flashtool)?
Click to expand...
Click to collapse
help me please mention Experts
hello , hope you can help me folks.
i just update my xperia m4 aqua this morning via pc companion, then it gave an error message "updating failed".
then it boots and i was surprised by the sony logo in white background, but it freeze few seconds after showing the blue wave like animation. i tried using pc companion to repair it but it also gives me an error message.
Software repair error
UEGetPhoneInfoMissingInfo
E2303 3565 Unknown Nov 24 2015/14:03:56 26.3.A.1.33
1.7.2.0 / Windows 8.1 64 bit / Win32 / US
Download correct firmware for your phone (there is a special topic here with all versions) and try to flash with Flashtool.
valyo_bg said:
Download correct firmware for your phone (there is a special topic here with all versions) and try to flash with Flashtool.
Click to expand...
Click to collapse
how do i check the firmware of my unit?
Download for E2303 if this is your phone's modification, then flash with Flashtool. Do wipe of everything before that and beware that all data will be deleted, so hopefully you have backup already.
valyo_bg said:
Download for E2303 if this is your phone's modification, then flash with Flashtool. Do wipe of everything before that and beware that all data will be deleted, so hopefully you have backup already.
Click to expand...
Click to collapse
thanks my friend, i already downloaded E2303, but when i do bundle the firmware, it is not responding , im am using the latest version of Sony Mobile Flasher By Androxyde
one more question,
do the CDA# , Market and Operator of the firmware does not matter??
You can use for different market if your phone is not locked to particular mobile operator. Try to reset phone first on this order:
1. Power off phone
2. Press and hold volume down button
3. Press and hold volume up button
4. Press and hold power button
5. Hold all 3 buttons for at least 30 seconds
6. Then try to flash your phone again
valyo_bg said:
You can use for different market if your phone is not locked to particular mobile operator. Try to reset phone first on this order:
1. Power off phone
2. Press and hold volume down button
3. Press and hold volume up button
4. Press and hold power button
5. Hold all 3 buttons for at least 30 seconds
6. Then try to flash your phone again
Click to expand...
Click to collapse
thanks bro
now i got my phone working, and it's upgraded to marshmallow
:good::good::good::good:
You are welcome .
can i use this step for Sony Xperia M4 E2353 ?
i have same problem, sony logo in white background but not show blue wave like animation
You can try, hopefully will work for you.