Just got the T820XXU1AQF3/T820XAR1AQF2 update installed on my tablet and everything works fine except it no longer sees 2.4Ghz WiFi if it is on channel 11-13 on my Netgear X4S router.
Everything was working before the update, so what could have caused this? Is there anything I can do to roll back to the previous modem or kernel?
Thx.
Velathawen said:
Just got the T820XXU1AQF3/T820XAR1AQF2 update installed on my tablet and everything works fine except it no longer sees 2.4Ghz WiFi if it is on channel 11-13 on my Netgear X4S router.
Everything was working before the update, so what could have caused this? Is there anything I can do to roll back to the previous modem or kernel?
Thx.
Click to expand...
Click to collapse
I would save my data then first try a factory data reset. If that doesn't work you should be able to roll back by Odin flashing the last U.S. firmware: https://forum.xda-developers.com/galaxy-tab-s3/how-to/firmware-t820-qdxusa-android-7-0-t3626822
muniz_ri said:
I would save my data then first try a factory data reset. If that doesn't work you should be able to roll back by Odin flashing the last U.S. firmware: https://forum.xda-developers.com/galaxy-tab-s3/how-to/firmware-t820-qdxusa-android-7-0-t3626822
Click to expand...
Click to collapse
Unfortunately I've already done most of the usual troubleshooting steps including:
- Forget WiFi AP and attempt to add again (can't see if the router autos to mentioned channels)
- Cache clear
- Factory reset
- Emergency firmware upgrade via Kies
Looks like downgrade is the only option available at this time, I'll report back after work and see if the downgrade fixes it for me or not.
Thx!
Velathawen said:
Unfortunately I've already done most of the usual troubleshooting steps including:
- Forget WiFi AP and attempt to add again (can't see if the router autos to mentioned channels)
- Cache clear
- Factory reset
- Emergency firmware upgrade via Kies
Looks like downgrade is the only option available at this time, I'll report back after work and see if the downgrade fixes it for me or not.
Thx!
Click to expand...
Click to collapse
It's likely just a bad flash. Downgrading then taking the ota update again should resolve it. I received the update and all continues to work well.
got it here too....
<<< Android >>>
Android Version: 7.0 (Nougat)
API Level: 24
Android Security Patch Level: 2017-06-01
Rooted Device: No
Android ID: .....
Bootloader: T820XXU1AQF3
Build ID: NRD90M.T820XXU1AQF3
Codename: REL
Fingerprint: samsung/gts3lwifixx/gts3lwifi:7.0/NRD90M/T820XXU1AQF3:user/release-keys
ID: NRD90M
Incremental: T820XXU1AQF3
Java Runtime Version: Android Runtime 0.9
Java VM Version: ART 2.1.0
Java VM Heap Size: 256 MB
Kernel Architecture: armv8l
Kernel Version: 3.18.31-11628211 ([email protected]) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 13 21:50:48 KST 2017
Tags: release-keys
<< Wi-Fi >>
State: Enabled
SSID: "xxxxxxx"
BSSID: ....
Hidden SSID: No
IPv4 Address: 192.168.28.55
IPv6 Address: fe80::42d3:aeff:fe63:2d84
Signal Strength: -61 dBm (Very Good)
Link Speed: 520 Mbps
Frequency: 5180 MHz
Network ID: 116
Gateway: 192.168.28.1
Netmask: 255.255.254.0
DNS1: 8.8.8.8
DNS2: 4.2.2.2
DHCP Lease Duration: 12 hours
5 GHz Band: Supported
Wi-Fi Direct: Supported
before the upgrade:
<< Wi-Fi >>
State: Enabled
SSID: "eeeee900"
BSSID: 00:aa:c6:ee:00:7f
Hidden SSID: No
Signal Strength: -43 dBm (Excellent)
Link Speed: 130 Mbps
Frequency: 2462 MHz
Network ID: 113
Gateway: 192.168.1.1
Netmask: 255.255.255.0
DNS1: 192.168.1.1
DHCP Lease Duration: 168 hours
5 GHz Band: Supported
Wi-Fi Direct: Supported
---------- Post added at 05:52 AM ---------- Previous post was at 05:45 AM ----------
ok, I retract.
I am able to connect 2.4Ghz... I took a snapshot before and after the upgrade. So the 5.1Ghz I saw after the upgrade was temporary. Never happen before though.
muniz_ri said:
It's likely just a bad flash. Downgrading then taking the ota update again should resolve it. I received the update and all continues to work well.
Click to expand...
Click to collapse
Think I'm just going to stick with the downgraded firmware for now.
I am not sure it can be 4 consistent bad flashes in a row with 3 attempts OTA and once via Samsung Kies with the exact same result every time.
Velathawen said:
Think I'm just going to stick with the downgraded firmware for now.
I am not sure it can be 4 consistent bad flashes in a row with 3 attempts OTA and once via Samsung Kies with the exact same result every time.
Click to expand...
Click to collapse
never surrender!
I honestly don't think the issue is a bad flash but looking around it might be region conflict.
I got my tablet off Amazon but I'm using it in Asia at the moment. I wonder if I can get away with flashing the local firmware for the device as I want to hold off rooting until I'm sure the tablet is problem free.
Edit - just flashed an Asian firmware and everything works fine
Related
Hi all. This is my first post here, as well as my first Android phone. It is a Caterpillar B15 smartphone.
The problem is, I am in South Korea on a business trip, and the phone will not detect any networks.
I have AT&T service, with international roaming. I have used my SIM card in another phone in South Korea, and the SIM will work here.
I have tried the following things.
As suggested by Catphones.com support, I installed an APN app which installed the APN for the KT Olleh network's data and MMS. This made no difference. I was successfully able to root the phone using instructions here, so that the APN app would work.
The phone is supposed to support the following freqnencies:
HSDPA /WCDMA Dual-Band 900/2100MHz
GSM/GPRS/EDGE Quad-Band 850/900/1800/1900MHz
From what I read, South Korea uses WCDMA 2100 band.
The other info on the phone follows:
Hardware : MT6577
Model : B15
Build number : EMEA_SS.1.020.02
Build date UTC : 20130315-094545
Android v : 4.1.2
Baseband v: [email protected], 2013/03/15 14:35
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri Mar 15 15:30:45 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hx8369_dsi_6575
I have found several other posts about phones not working in South Korea, and nobody seems to have a firm answer.
The phone DOES work in USA without problems.
Thank you very much for any info!
Sincerely,
David
Good day, still hopeful someone has had this problem and overcome it. I am going to return to Korea in a few days.
Sincerely,
David
turbokinetic said:
Hi all. This is my first post here, as well as my first Android phone. It is a Caterpillar B15 smartphone.
The problem is, I am in South Korea on a business trip, and the phone will not detect any networks.
I have AT&T service, with international roaming. I have used my SIM card in another phone in South Korea, and the SIM will work here.
I have tried the following things.
As suggested by Catphones.com support, I installed an APN app which installed the APN for the KT Olleh network's data and MMS. This made no difference. I was successfully able to root the phone using instructions here, so that the APN app would work.
The phone is supposed to support the following freqnencies:
HSDPA /WCDMA Dual-Band 900/2100MHz
GSM/GPRS/EDGE Quad-Band 850/900/1800/1900MHz
From what I read, South Korea uses WCDMA 2100 band.
The other info on the phone follows:
Hardware : MT6577
Model : B15
Build number : EMEA_SS.1.020.02
Build date UTC : 20130315-094545
Android v : 4.1.2
Baseband v: [email protected], 2013/03/15 14:35
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri Mar 15 15:30:45 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hx8369_dsi_6575
I have found several other posts about phones not working in South Korea, and nobody seems to have a firm answer.
The phone DOES work in USA without problems.
Thank you very much for any info!
Sincerely,
David
Click to expand...
Click to collapse
Guys Please help for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130618-102612
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 18 18:24:15 CST 2013
Its always on 2G, even at Mobileuncle Tools, 3G options still cant
and how to repartition internal memory?
its only 500mb meanwhile 2GB useless
try *#*#4636#*#* and phone information and force it onto 3g
bobthecooldad said:
try *#*#4636#*#* and phone information and force it onto 3g
Click to expand...
Click to collapse
Useless it always return to GSM only
should i change rom / kernel? or replace modem.img?
magnacharta said:
Useless it always return to GSM only
should i change rom / kernel? or replace modem.img?
Click to expand...
Click to collapse
you cant put anything but the chinease version or you WILL PERMANENTLY BRICK your device as it will corrupt the boot loader.
You will have to make something yourself or find someone with the same phone and do a rom export (google it)
have you been in the service menu and seen if it works and also can i have a model as it could be down to the bands in your country.
what country are you from as your phone only has the 2100mhz band
http://www.worldtimezone.com/gsm.html
This website has the bands so find your country and it might not be supported as cheaper phones don't need to have all the 3g band's
i went to mobile uncle tools - bandmode
GSM mode (all selectable)
EGSM900, DCS1800, PCS1900 GSM850
Meanwhile
All UMTS mode is colored gray, cant select it
WCDMA-IMT-2000, WCDMA-PCS-1900, WCDMA-DCS-1800, WCDM-AWS-1700, WCDMA-CLR-850, WCDMA-800, WCDMA-IMT-E-2600, WCDMA-GSM-900,WCDMA-1800, WCDMA-1700 (all cant select)
i've check my Friend Note 2 Clone(MT6575 (SMDK4x12 is Fake!) model GT-7100),
its able to connect 3G coz it able to select
WCDMA-IMT-2000, WCDMA-CLR-850, WCDMA-800, WCDMA-GSM-900
Im in Indonesia btw
I’ve tried SPF using another S4 Clone rom, but always stuck on scatter files
“Access violation at address 0FA910A0 in module ‘FLASHTOOLLIB.DLL’. Read of address 00000000.”
When I use my own scatter files. After SPF process, its wont booting
My lcd is glowing but nothing happen
any idea?
Bump. Ive got the same phone and 3G is not working, cannot select the box.
Any news ?
how may I help?
I have a stock rom for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build version : 1377656106
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) 1313 v53 Wed Aug 28 14:56 CST 2013
RAM: 2gb
ROM: 2.5gb
working 3g
air gesture one direction only
will upload it if you still need it.
magnacharta said:
i went to mobile uncle tools - bandmode
GSM mode (all selectable)
EGSM900, DCS1800, PCS1900 GSM850
Meanwhile
All UMTS mode is colored gray, cant select it
WCDMA-IMT-2000, WCDMA-PCS-1900, WCDMA-DCS-1800, WCDM-AWS-1700, WCDMA-CLR-850, WCDMA-800, WCDMA-IMT-E-2600, WCDMA-GSM-900,WCDMA-1800, WCDMA-1700 (all cant select)
i've check my Friend Note 2 Clone(MT6575 (SMDK4x12 is Fake!) model GT-7100),
its able to connect 3G coz it able to select
WCDMA-IMT-2000, WCDMA-CLR-850, WCDMA-800, WCDMA-GSM-900
Im in Indonesia btw
I’ve tried SPF using another S4 Clone rom, but always stuck on scatter files
“Access violation at address 0FA910A0 in module ‘FLASHTOOLLIB.DLL’. Read of address 00000000.”
When I use my own scatter files. After SPF process, its wont booting
My lcd is glowing but nothing happen
any idea?
Click to expand...
Click to collapse
Have the exact same problem. Did you find a solution??
magnacharta said:
Guys Please help for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130618-102612
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 18 18:24:15 CST 2013
Its always on 2G, even at Mobileuncle Tools, 3G options still cant
and how to repartition internal memory?
its only 500mb meanwhile 2GB useless
Click to expand...
Click to collapse
Do not go for Repartitioning Internal Memoryas few 100 MBs won't do you any good.
better to swap internal user memory with the External SD if your phone support one but you won't be able to run applications with high resource requirements eg. Asphalt 8 or GTA, etc.
huckuchie said:
I have a stock rom for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build version : 1377656106
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) 1313 v53 Wed Aug 28 14:56 CST 2013
RAM: 2gb
ROM: 2.5gb
working 3g
air gesture one direction only
will upload it if you still need it.
Click to expand...
Click to collapse
hi there ive read and would like to request for the copy of that rom. cause i have the same problem.
Hi, I have a tab Audiola 05783g with the following caracteristics:
Display 7.85" HD IPS, Resolution 1024x768, Processor A7 Dual Core MTK 8312 1.3GHz, RAM 1G DDRIII, Graphics GPU Mali-400, Android 4.2.2 Jelly Bean, Memory 8GB , SDHC 32GB, Front Camera 0,3 Mpixel - Back Camera 2 Mpixel, WI-FI (b-g-n), 3G Voice + Data, Bluetooth 3.0, GPS + AGPS.
The software installed is:
Base Band ver. MOLY.WR8.W1315.MD.WG.MP.V18, 2013/11/29 20:10
Kernel 3.4.5 shyelinktek2 #1 Thu Apr 10 20:55:08 CST 2014
Build number MT83X2_MR790_MR7902H1CW1.2014041020
Personal Build xers. 1.19_20140303
The Tab come without Play Service, and after I had installed it I've got Time Service and Monkey Test malware.
I tryed a factory reset but this did't fix the problem due to the malware become part of the system.
Can anybody of you, expert guys, suggest me the way to clean the system?
Thanks
Ziofritz
ROM image that I'm trying to find for a Model 102 Tablet. This is all new and strange to me I have but little experience on android, so thanks again for your assistance.
The Motherboard: m102_v.1.2
Model M102
Processor: Allwinner quadcore A33
Android version 4.4.2
Firmware V2.0
Kernel 3.4.39
Kernel version [email protected] # 19
Monday Sep 15 15:01:21 CST 2014
Build No: astar_m102 eng 4.4.2 KVT49L 20140915 test_keys
It has an 8723BS wifi chip
I can get the tablet to run "sort of" with A33_U102_U1021C.201401013.img from "mytabletguru.com/allwinner-a33-firmware-and-tool/ " but there is no wifi. I have tried to modify the system configuration file for the U102 image file, so as to try to turn on the wifi chip, but without success. Any help appreciated.
The wifi chip is RT8723BS
-
EFPOM said:
ROM image that I'm trying to find for a Model 102 Tablet. This is all new and strange to me I have but little experience on android, so thanks again for your assistance.
The Motherboard: m102_v.1.2
Model M102
Processor: Allwinner quadcore A33
Android version 4.4.2
Firmware V2.0
Kernel 3.4.39
Kernel version [email protected] # 19
Monday Sep 15 15:01:21 CST 2014
Build No: astar_m102 eng 4.4.2 KVT49L 20140915 test_keys
It has an 8723BS wifi chip
I can get the tablet to run "sort of" with A33_U102_U1021C.201401013.img from "mytabletguru.com/allwinner-a33-firmware-and-tool/ " but there is no wifi. I have tried to modify the system configuration file for the U102 image file, so as to try to turn on the wifi chip, but without success. Any help appreciated.
The wifi chip is RT8723BS
-
Click to expand...
Click to collapse
Possibly an Eken mainboard - you likely need to open the unit up, and get the PCB model from the silkscreen markings, and search based on that information
Code:
READ CAREFULLY!!!
You flash these files at your own responsibility!
I am not responsible for any damage that might
be caused by flashing (bricked device, lost data, ...)!
Flash only the correct files for your phone!
Since no custom ROM for the SM-T585 on this side updates the baseband/modem, here you'll find all availiable ones from the original firmwares. With a new baseband/modem you might benefit from a better cell reception and / or less power consumption. Feel free to test, which one works best for you!
md5-checksums for every file can be found HERE (md5: 17cf72396f1f8cbbdebbd6b7dcb7ccc4).
Basebands
Newest:
From DBT-T585XXS7CUI2 the baseband UI2 Modem_T585XXS7CUI2_14.09.2021 alternative TWRP-Flashable-Modem_T585XXS7CUI2_14.09.2021
Older:
From XEH-T585XXU6CUE1 the baseband UE1 Modem_T585XXU6CUE1_06.05.2021 alternative TWRP-Flashable-Modem_T585XXU6CUE1_06.05.2021
From EGY-T585XXU6CTF1 the baseband TF1 Modem_T585XXU6CTF1_05.06.2020 alternative TWRP-Flashable-Modem_T585XXU6CTF1_05.06.2020
From DBT-T585XXS6CTC3 the baseband TC3 Modem_T585XXS6CTC3_25.03.2020 alternative TWRP-Flashable-Modem_T585XXS6CTC3_25.03.2020
From ACR-T585XXU6CTB2 the baseband TB2 Modem_T585XXU6CTB2_28.02.2020 alternative TWRP-Flashable-Modem_T585XXU6CTB2_28.02.2020
From DBT-T585XXU6CSK1 the baseband SK1 Modem_T585XXU6CSK1_10.01.2020 alternative TWRP-Flashable-Modem_T585XXU6CSK1_10.01.2020
From VD2-T585XXS5CSH2 the baseband SH2 Modem_T585XXU5CSH2_06.08.2019 alternative TWRP-Flashable-Modem_T585XXU5CSH2_06.08.2019
From AMO-T585XXS5CSH1 the baseband SH1 Modem_T585XXS5CSH1_02.08.2019 alternative TWRP-Flashable-Modem_T585XXS5CSH1_02.08.2019
From BTU-T585XXU5CSG3 the baseband SF1 Modem_T585XXU5CSF1_25.06.2019 alternative TWRP-Flashable-Modem_T585XXU5CSF1_25.06.2019
From DBT-T585XXU5CSB1 the baseband SB1 Modem_T585XXU5CSB1_26.02.2019 alternative TWRP-Flashable-Modem_T585XXU5CSB1_26.02.2019
From PHN-T585XXU4BRI1 the baseband RJA Modem_T585XXU4CRJA_29.10.2018 alternative TWRP-Flashable-Modem_T585XXU4CRJA_29.10.2018
From DBT-T585XXU4BRI1 the baseband RI1 Modem_T585XXU4BRI1_19.09.2018 alternative TWRP-Flashable-Modem_T585XXU4BRI1_19.09.2018
From DBT-T585XXU3BRF1 the baseband RF1 Modem_T585XXU3BRF1_21.06.2018 alternative TWRP-Flashable-Modem_T585XXU3BRF1_21.06.2018
From ILO-T585XXU2BRB2 the baseband RB2 Modem_T585XXU2BRB2_21.02.2018 alternative TWRP-Flashable-Modem_T585XXU2BRB2_21.02.2018
From OMN-T585XXU2BQK5 the baseband QL1 Modem_T585XXU2BQL1_13.12.2017 alternative TWRP-Flashable-Modem_T585XXU2BQL1_13.12.2017
From XSP-T585XXU2BQI9 the baseband QI9 Modem_T585XXU2BQI9_19.09.2017 alternative TWRP-Flashable-Modem_T585XXU2BQI9_19.09.2017
From ECT-T585XXU2BQF1 the baseband QE8 Modem_T585XXU2BQE8_18.05.2017 alternative TWRP-Flashable-Modem_T585XXU2BQE8_18.05.2017
From LUX-T585XXU2BQE4 the baseband QE4 Modem_T585XXU2BQE4_08.05.2017 alternative TWRP-Flashable-Modem_T585XXU2BQE4_08.05.2017
From XEH-T585XXU2AQA2 the baseband PL4 Modem_T585XXU1APL4_27.12.2016 alternative TWRP-Flashable-Modem_T585XXU1APL4_27.12.2016
From XEZ-T585XXU1APG1 the baseband PG1 Modem_T585XXU1APG1_19.07.2016 alternative TWRP-Flashable-Modem_T585XXU1APG1_19.07.2016
From TIM-T585XXU1APE3 the baseband PE3 Modem_T585XXU1APE3_10.05.2016 alternative TWRP-Flashable-Modem_T585XXU1APE3_10.05.2016
StockRom:
MODEL T585:
Newest 8.1 release
Model: SM-T585
OS: Oreo(Android 8.1.0)
Filename: SM-T585_1_20210921201934_gt5kwcj4cm_fac
How to flash with Odin
1. Download and unpack the correct file for your device.
2. Get your Tablet into the Download Mode (Power + Vol Down + Home) and connect with your PC / Laptop.
3. Start Odin:
Odin < 3.10 --> use the buton PhoneOdin >= 3.10 --> use the button CP (if the button is grey and not usable, edit the Odin3. ini --> under [ButtonOption] change Phone=0 to Phone=1)4. Start flashing --> Tab reboots.
5. Check under settings --> about the phone --> baseband-version. If it's the new one, well done!
How to flash with TWRP
1. Download the correct flashable *.zip file
2. Boot into recovery
3. Settings -> disable / uncheck "Zip siganture verification" under settings
4. Install -> select *.zip and install
5. Reboot
Legend:
A*** = Marshmallow
B*** = Nougat
C*** = Oreo
*P** = 2016
*Q** = 2017
*R** = 2018
*S** = 2019
*T** = 2020
*U** = 2021
**A* = January
**B* = February
**C* = March
**D* = April
**E* = May
**F* = June
**G* = July
**H* = August
**I* = September
**J* = October
**K* = November
**L* = December
***X = Version / Nummer
If I have updated the device to the latest stock ROM available via OTA, the baseband should have been already updated, right?
Thank you.
Please have a look under Settings --> about device --> baseband version. Depending on your carrierer and country the newest baseband is not always provided.
New modem added and all modems made flashable via TWRP.
would you please provide that for the t580 as well or is it the same?
As far as I know the 580 has no SIM card and therefore no modem to update. Please correct me if I'm wrong.
Confirm! Flashed TWRP-Flashable-Modem_T585XXU3BRF1_21.06.2018 without any Problem.
Thanks...
New Modem T585XXU4BRI1 added.
New modem T585XXU4CRJA & stock rom mirror for OREO added.
Thanks for the link to 8.1 I think that we'll need Odin3_v3.13.1 to install this firmware though. Haven't tried with lower version yet but with the LZ4 files inside the firmware won't work without the Odin3_v3.13.1 . About to install the firmware. btw where is the link for the proper twrp? I have the 3.2.3 one from Valera1978 that I hope will work.
Edit: confirming that the latest odin will install 8.1 fine....
Dezember Stock Update added.
TWRP on Galaxy Tab 10.1 (T585) with Oreo 8.1
Then I've tried
twrp_3.2.3-1_sm-t585_29918 which gives only stripes when booting into recovery
Do I have to flash the stock boot/recovery before flashing this one,
or this is broken, as well.
Many thanks for a hint,
Helmut
HJarausch said:
TWRP on Galaxy Tab 10.1 (T585) with Oreo 8.1
Then I've tried
twrp_3.2.3-1_sm-t585_29918 which gives only stripes when booting into recovery
Do I have to flash the stock boot/recovery before flashing this one,
or this is broken, as well.
Many thanks for a hint,
Helmut
Click to expand...
Click to collapse
Try Follow msi's recovery download it through roms link it works.
Does anyone know if there is a way to add LTE band 28 (700MHz) to this modem? I would like to connect my tablet to the Movistar network in Panama.
March 2019 ROM and modem update.
SM-T585 Stock Firmware For Persian Users
hello my dear friends, latest version for persian users [FREE DOWNLOAD]
download stock rom samsung sm-t585 : DIRECT LINK
Build Number : T585XXU4CRK6 ( Android 8.1.0 - THR )
reza5261 said:
hello my dear friends, latest version for persian users. Build Number : T585XXU4CRK6 ( Android 8.1.0 - THR )
Click to expand...
Click to collapse
Is there a reason that you link to an old firmware with a build date from November 2018 when there is a build from February 2019 with a more up to date Securty Patch Level? It really doesn't matter for which country / carrier the rom was build you can always install and use it.
Just for comparrison:
Country Iran
Version Android 8.1.0
Changelist 14669859
Build date Mon, 19 Nov 2018 05:42:27 +0000
Security Patch Level 2018-11-01
Product code THR
Country Bulgaria
Version Android 8.1.0
Changelist 15497690
Build date Tue, 26 Feb 2019 09:43:50 +0000
Security Patch Level 2019-02-01
Product code BGL
Just for support Farsi & Arabic!
jaeck said:
Is there a reason that you link to an old firmware with a build date from November 2018 when there is a build from February 2019 with a more up to date Securty Patch Level? It really doesn't matter for which country / carrier the rom was build you can always install and use it.
Just for comparrison:
Country Iran
Version Android 8.1.0
Changelist 14669859
Build date Mon, 19 Nov 2018 05:42:27 +0000
Security Patch Level 2018-11-01
Product code THR
Country Bulgaria
Version Android 8.1.0
Changelist 15497690
Build date Tue, 26 Feb 2019 09:43:50 +0000
Security Patch Level 2019-02-01
Product code BGL
Click to expand...
Click to collapse
oh! sorry... This is the latest version for the Middle East that supports Persian and Arabic Menu...
Corrupted stock rom archive?
I tried to unpack the stock rom with WinRar or WinZip but could not extract the archive.
WinRar: "The archive is corrupt" (CRC failed in AP and HOME_CSC).
WinZip: "Data error" in AP and HOME_CSC files.
I even downloaded twice, just to make sure that it didn't went wrong in the process.
Am I doing something wrong or the archive is damaged?
subatomix said:
Am I doing something wrong or the archive is damaged?
Click to expand...
Click to collapse
You did nothing wrong! A faulty network card of mine currupted the upload and therefore the file was damaged. I did a reupload so please try again.