Related
First off, thanks for tolerating this somewhat noobish post, but I've searched through almost the whole internet trying to find answers.
Alright, so here's the dealio.
Sprint Galaxy Note 3. UICC unlocked via idoneapp, then used on domestic T-Mobile through GCF settings. I want to enable more bands as described in the following links: here and here.
I get as far as Step 9 in the second link. Then, I go to select a port, and it's not there. OK, so I uncheck the "diagnostic port only" check box, and select COM12 which is what my phone is on. No big deal, right? So I go to read/backup my NV and I start it; it only gets to 12% and says "Could not Communicate in Diagnostic Mode"
That's it. I've tried different USB ports, different USB cables, other USB modes on the phone, I even have a custom kernel. I really hope it's something obvious that I'm doing wrong instead of something that's a niche error.
Thanks, guys.
I ended up being able to read the LTE bands with DFS and write them with QXDM. The only thing is that there is no LTE/GSM/UMTS mode on the phone, so it's either LTE/CDMA or GSM/UMTS for now until I figure out if I can flash some other ROM to it to let it use the other bands, cause right now it only wants to look at band 25.
So I've been trying to flash the N900T MI7 modem/baseband on my N900P but I can never get it to flash in Odin. I've been able to put the modem and non-hlos in flash able zips and flash those but it never shows up. I've also tried to dd the files directly but that doesn't work either. Ideas?
I am impressed it's not bricked yet.
Sent from my SM-G935F using XDA-Developers mobile app
Same issue
BlockOfDynamite said:
First off, thanks for tolerating this somewhat noobish post, but I've searched through almost the whole internet trying to find answers.
Alright, so here's the dealio.
Sprint Galaxy Note 3. UICC unlocked via idoneapp, then used on domestic T-Mobile through GCF settings. I want to enable more bands as described in the following links: here and here.
I get as far as Step 9 in the second link. Then, I go to select a port, and it's not there. OK, so I uncheck the "diagnostic port only" check box, and select COM12 which is what my phone is on. No big deal, right? So I go to read/backup my NV and I start it; it only gets to 12% and says "Could not Communicate in Diagnostic Mode"
That's it. I've tried different USB ports, different USB cables, other USB modes on the phone, I even have a custom kernel. I really hope it's something obvious that I'm doing wrong instead of something that's a niche error.
Thanks, guys.
Click to expand...
Click to collapse
I am facing same issue regarding back up nv at 12%
vipsy6 said:
I am facing same issue regarding back up nv at 12%
Click to expand...
Click to collapse
So basically what happened was I found a couple other tools to do what I wanted. First was DFS tool. This works well, because it can both read and write bands to the nv of the phone. I forget what the second was, but it could both read and write the raw value of any given value in the nvram. I'll have to dig through my stuff again if you want to know what the second program was. The fact of the matter is that I was never able to get it working right. The phone always looked at band 25 LTE no matter what bands I turned on/off of the phone.
another ?
BlockOfDynamite said:
So basically what happened was I found a couple other tools to do what I wanted. First was DFS tool. This works well, because it can both read and write bands to the nv of the phone. I forget what the second was, but it could both read and write the raw value of any given value in the nvram. I'll have to dig through my stuff again if you want to know what the second program was. The fact of the matter is that I was never able to get it working right. The phone always looked at band 25 LTE no matter what bands I turned on/off of the phone.
Click to expand...
Click to collapse
Please let me know second program
BlockOfDynamite said:
First off, thanks for tolerating this somewhat noobish post, but I've searched through almost the whole internet trying to find answers.
Alright, so here's the dealio.
Sprint Galaxy Note 3. UICC unlocked via idoneapp, then used on domestic T-Mobile through GCF settings. I want to enable more bands as described in the following links: here and here.
I get as far as Step 9 in the second link. Then, I go to select a port, and it's not there. OK, so I uncheck the "diagnostic port only" check box, and select COM12 which is what my phone is on. No big deal, right? So I go to read/backup my NV and I start it; it only gets to 12% and says "Could not Communicate in Diagnostic Mode"
That's it. I've tried different USB ports, different USB cables, other USB modes on the phone, I even have a custom kernel. I really hope it's something obvious that I'm doing wrong instead of something that's a niche error.
Thanks, guys.
Click to expand...
Click to collapse
hi
how did you connect QPST to your phone? i can't do it,
installed QPST under windows 7, QDXM and kies, but in QPST configuration i get "No Phone" when added new port
walidham said:
hi
how did you connect QPST to your phone? i can't do it,
installed QPST under windows 7, QDXM and kies, but in QPST configuration i get "No Phone" when added new port
Click to expand...
Click to collapse
I never did get QPST to connect to my phone. I think I was able to get it to see the phone at some point, but it would never read anything from it or write anything to it. The program always froze up or something when I tried that. If I could remember the second program I used, I'd share it with you all, but for the life of me, I can't think of it.
Edit: Oh hey, the two programs I used are RIGHT IN MY SECOND POST. lol. Yeah, use DFS tool to read the NV and QXDM to write the NV. It'll save you a whole lot of trouble over doing stuff with QPST.
BlockOfDynamite said:
I never did get QPST to connect to my phone. I think I was able to get it to see the phone at some point, but it would never read anything from it or write anything to it. The program always froze up or something when I tried that. If I could remember the second program I used, I'd share it with you all, but for the life of me, I can't think of it.
Edit: Oh hey, the two programs I used are RIGHT IN MY SECOND POST. lol. Yeah, use DFS tool to read the NV and QXDM to write the NV. It'll save you a whole lot of trouble over doing stuff with QPST.
Click to expand...
Click to collapse
Hi
Yes i used only DFS tools and it work fine, also and changed my Bands 4G and 3G to work in Europe with Spint N900P phone,
3G work fine but not 4G, i will install custom Rom and see if it will work.
walidham said:
Hi
Yes i used only DFS tools and it work fine, also and changed my Bands 4G and 3G to work in Europe with Spint N900P phone,
3G work fine but not 4G, i will install custom Rom and see if it will work.
Click to expand...
Click to collapse
Well, 3G will work fine without changing anything anyway. All of the bands are already enabled. 4G is the issue.
BlockOfDynamite said:
Well, 3G will work fine without changing anything anyway. All of the bands are already enabled. 4G is the issue.
Click to expand...
Click to collapse
Yes 4G is the big pb, i found that DFS Tools write 3G bands but for LTE, the issue is in BC Config Div, need SPC code
i tried to find SPC /MSL code but no chance
I will install SPR-N900PVPUBMJ4 rom and after SPR-N900PVPUBMJ3 modem and use DSF tools to set it 000000
hope i will work
walidham said:
Yes 4G is the big pb, i found that DFS Tools write 3G bands but for LTE, the issue is in BC Config Div, need SPC code
i tried to find SPC /MSL code but no chance
I will install SPR-N900PVPUBMJ4 rom and after SPR-N900PVPUBMJ3 modem and use DSF tools to set it 000000
hope i will work
Click to expand...
Click to collapse
Flash the MI3 (that's emm eye three) modem and then use the app included in the zip file to find the MSL code. Here's a link to the zip file: http://bit.ly/1oZDO9t
I was not aware that you could change the MSL code with DFS tools. At least I have a Verizon Note 3 now, so I have a lot more LTE bands than the Sprint version does (although I don't care all that much; I think I may switch to the Nexus 6 soon). But yeah, try the stuff in the zip file from the link, and you should be able to
Find your MSL code
Unlock your phone internationally
Use hidden menus
Most of all, have fun! I know for sure this can be very very frustrating a lot of the time, but if you don't have fun, then I don't think there's much profit in trying stuff like this. Good luck!
BlockOfDynamite said:
Flash the MI3 (that's emm eye three) modem and then use the app included in the zip file to find the MSL code. Here's a link to the zip file: http://bit.ly/1oZDO9t
I was not aware that you could change the MSL code with DFS tools. At least I have a Verizon Note 3 now, so I have a lot more LTE bands than the Sprint version does (although I don't care all that much; I think I may switch to the Nexus 6 soon). But yeah, try the stuff in the zip file from the link, and you should be able to
Find your MSL code
Unlock your phone internationally
Use hidden menus
Most of all, have fun! I know for sure this can be very very frustrating a lot of the time, but if you don't have fun, then I don't think there's much profit in trying stuff like this. Good luck!
Click to expand...
Click to collapse
After many try, finaly i get my MSL code (24 hours).
I have downgrad my phone to 4.4.2, and install custom rom Galaxy-Note-fre3-2.26,
and after using adb and logcat i got my code.
Now how can i activate it for internationally ? i have added all LTE band (3,7,20) but still H+
I will try with QXDM, but i have windows 10 and give me error acces denied.
walidham said:
After many try, finaly i get my MSL code (24 hours).
I have downgrad my phone to 4.4.2, and install custom rom Galaxy-Note-fre3-2.26,
and after using adb and logcat i got my code.
Now how can i activate it for internationally ? i have added all LTE band (3,7,20) but still H+
I will try with QXDM, but i have windows 10 and give me error acces denied.
Click to expand...
Click to collapse
I just did it with my Verizon Note 3 on Windows 10, so I know it's not a Windows 10 issue. Also, QPST seemed to work with my Verizon phone but not my Sprint phone. Weird. Make sure you're running QXDM as administrator. Also, I unlocked all of the LTE bands in this way but I can't seem to get LTE from my GSM sim card, even by going into the service mode and enabling all LTE bands.
BlockOfDynamite said:
I just did it with my Verizon Note 3 on Windows 10, so I know it's not a Windows 10 issue. Also, QPST seemed to work with my Verizon phone but not my Sprint phone. Weird. Make sure you're running QXDM as administrator. Also, I unlocked all of the LTE bands in this way but I can't seem to get LTE from my GSM sim card, even by going into the service mode and enabling all LTE bands.
Click to expand...
Click to collapse
Yes; for LTE i found in hiddn menu, that they use Tri Bands (25, 26 & 41), so for others bands will not work.
I don't know how i can disable this and force it to use bands 3, 7 20.
walidham said:
Yes; for LTE i found in hiddn menu, that they use Tri Bands (25, 26 & 41), so for others bands will not work.
I don't know how i can disable this and force it to use bands 3, 7 20.
Click to expand...
Click to collapse
I honestly couldn't tell you, and I'm not sure how much help I'm going to be in general. I've tried it on both of my Note 3 phones but have had no confirmed success. Sprint especially is the one carrier that sticks out like a sore thumb, and by association, so do their phones. I've had plenty of frustration on that front, that's for sure.
BlockOfDynamite said:
I honestly couldn't tell you, and I'm not sure how much help I'm going to be in general. I've tried it on both of my Note 3 phones but have had no confirmed success. Sprint especially is the one carrier that sticks out like a sore thumb, and by association, so do their phones. I've had plenty of frustration on that front, that's for sure.
Click to expand...
Click to collapse
Thanks for your help,
Just one question if have any idea for it
can i install Firmware N9005 using PIT file for N90005 in N900P?
Because when i received my phone(from china) , the first time i see that BaseBand version is for n9005 and phone name n900 but in download mode i see n900p
i think chines have a method to do it
walidham said:
Thanks for your help,
Just one question if have any idea for it
can i install Firmware N9005 using PIT file for N90005 in N900P?
Because when i received my phone(from china) , the first time i see that BaseBand version is for n9005 and phone name n900 but in download mode i see n900p
i think chines have a method to do it
Click to expand...
Click to collapse
Maybe. Really they have a method to do anything I would advise against trying to do that, although I'm not sure what harm it could do if you can still get back into download mode. I've tried flashing different versions' firmware to the N900P with no success.
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Change the rom
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
I did the same thing by my mistake.And my le max 2 also became not able to connect internet. In my case, it can't connect both 4G and 3G .
But I fixed it. But I don't know that it get back to the original completely.
I'm japanese.And I'm sorry for that my English skil is very poor.
My current rom is Le2_X820-MAX_ROW-5.8.015S_V29_CUOCO92.
I used DFS CDMA TOOL and checked the items on the "Band Preferred" same as "RF BC Config".
1. download HTC Diag Driver. You have to customize .inf file later.
2. conect device to your windows pc and choose MTP and USB Debugging.
3. enter the follows command.
"adb shell"
"su"
"setprop sys.usb.config diag,adb"
When you enter this command, your device change over diag mode.
4. diag driver install.
You have to find hardwawer ID from device manager.
And replace the hardware ID in .inf file.
5. If you install diag driver correctly, you will be able to use DFS CDMA TOOL.
sorry, I can't explain any more..English is difficult...
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Ootp said:
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
Click to expand...
Click to collapse
Many thanks for the advice but it didn't help. I had installed the indian rom and then to the chinese without any change in the behavior of the modem. I'll try the chatmonchy's advice to see if there will be any improvement.
xterminater07 said:
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Click to expand...
Click to collapse
Actually I'm in Europe and looks like we use slightly different bands (??). I get 4G data but without calls. To other networks like 2G and 3G it connects sometimes but it's for few seconds only. I even don't remember what made me change the bands to USA, I guess I was curios what settings those were. The options are "USA band" and "Band 6", neither one is working well for my device. And strangely though, there is no other option to go back like "Auto" or something. It seems that I'm not the only one that did it. After a google search, it turned out that a lot of people had the same issue. For some, the factory reset helped, for others was flashing via TWRP the radio bands again.
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
valy_cta said:
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
Click to expand...
Click to collapse
That's good!!
I'm looking forward to your guide about unlock additional bands.
thread: [SOLVED] Accidentally changed the Radio Band to USA
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
readion said:
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
Click to expand...
Click to collapse
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
karellang said:
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Click to expand...
Click to collapse
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
Does not help. If I go to servise menu (dial *#*#4636#*#*) , I see Radio turned OFF and I can´t change it. How to solve this ?
Did you post any guide how you solved the issue?
Unfortunately USA band selected
Hi,
I live in India. I bought Oppo F3 Plus (CPH1613) 4Gb Ram, 64GB Storage, Qualcomm MSM8976 Pro Snapdragon 653 a year ago and was working too much fine. I was wondering about Qualcomm mobile secret codes and found this *#*#4636#*#* . I dialed this and accidentally changed radio band to USA band and suddnly on instant my mobile didn't get any network signal. From then, I went for Oppo care, and mobile repairing shops and self tried and tested for lots of time; but everyone unable to bring phone to normal. I reset my mobile, flashed stock rom for countless times, wiped all data but nothing helped me out. Finally i rooted my oppo f3 plus and tried to boot in fastboot mode; but Oppo removed bootloader and fastboot mode from 2016 (as posted in XDA). I got a little link about resetting USA band to automate and is erasing modemst1 and modemst2. But again it have to be performed from fastboot.
Help me out for my mobile.
You can flash a modem file, it will reset it as well. Changing the ROM won't update the modem configuration. Try to search modem files and flash them via TWRP.
After reading through the OPO thread and someone confirming they saw bands unlocked for their OP2, but could not test if they are working as well as reading through the OP3 and similar threads with our processor I finally delved into trying this. Here is the quick guide of how to do it. Sorry if there is any confusion I will try my best to make it concise as possible. This is my first time writing a guide up for XDA.
I have not been able to test each band to confirm it's working, but it is showing up in Network Guru. I am on AT&T so I only unlocked AT&T bands (bc that's all I care about currently and it makes it easier for me to test)
I WILL NOT BE HELD RESPONSIBLE IF SOMETHING WRONG HAPPENS TO YOUR DEVICE BY FOLLOWING THIS GUIDE!
Credit: All my fellow XDA'rs who have been diligently testing, experimenting, bricking/unbricking, creating ROMs, FLASH, Root ability, and Bootloader unlocking. You are the heart and soul of XDA!
[URL="https://forum.xda-developers.com/member.php?u=4066277" @otonieru[/URL] for the concise guide
[URL="https://forum.xda-developers.com/member.php?u=7846474" @baskaflyfer[/URL] Rmt Storage Patch Zip
Here is the OP3 thread I based this guide off of and credit to all those mentioned in there as getting this far would have been impossible without them: https://forum.xda-developers.com/oneplus-3/how-to/guide-unlock-additional-lte-bands-t3519563
OKAY:
PreReq's:
1. Rooted
2. TWRP or like
3. RMT Storage patch from OP3 forums: SEE POST BELOW!
4. DFS Explorer - Find via searching XDA, again checking OP3 thread or OPO
5. ADB installed (whether that be minimal ADB or like from other toolboxes out there)
6. QPST - Check forums for download
Guide:
1. Put phone in MTP mode if not default (Some default to charge mode) Just go to status bar and press the charging mode to change to file transfer
2. Place file from PRE-REQ #3 in a folder you'll remember
3. Reboot phone (or shut down) and when coming on hold Vol Down+Power for a few seconds and let go
4. Boot into TWRP
5. Backup (If you don't have a backup of EVERYTHING at this point, probably a good idea to do so)
---If you do take only EFS
And install file from #3
6. Restart into System
7. Open up your CMD and run this ADB command :
adb devices
adb shell
su (you will get pop up on your phone to give root authorization for ADB, authorize it)
setprop sys.usb.config diag,adb (this will open your OP3 diagnostic port)
Click to expand...
Click to collapse
This forces it into DIAG mode, check your Device Manager to see if you see a port connection displaying a COM PORT.. IF NOT, you need to install drivers--Search thread for drivers, likely will be find in original OPO or OP3 thread.
***********THIS SECTION IS PURELY PRECAUTIONARY*********************** SKIP TO 11 IF YOU WANT
Purely precautionary we did not have to restore any QCN as they do in OP3 due to encryption:
8. Install QPST, open QPST
Now fire up QPST and go to "Port" tab, and choose "Add New Port" ,
9. On "Serial/USB Port" tab, unchecked the option of "Show Serial & USB...bl bla bla" option, you will see your phone listed there as a "COM#" (# is a number depending on your PC) choose it, and click "OK"
10. Now choose "Start Clients" from the Menu tab above, and choose "Software Download"
**********************************************************************************
11. CLOSE QPST. Open up DFS Explorer, when the signup option comes up it is up to you whether or not you want to register for an account (Good to support them since it's a good application) If not, press the X and the app will be there
12. You should see your PORT listed as you did on QPST. Double click on it (If you can't; confirm QPST is closed otherwise you won't be able to connect to the port) You should see it turn green and highlighted ONLINE if you successfully connected
13. Go to the "Band" option then click on "LTE"
14. Press READ; Give it a second and you should see all currently enabled bands listed; If you want to compare you can go to "Network Guru" and press the 3 dots on the top right and press Band Locking and then press LTE.. Should list the same ones
15. Check the additional bands (Just because it says it's enabled, doesn't mean hardware wise it will work due to chipset hardware limitations; This is why as you all do this if you can confirm which bands for you connected and/or didn't connect we can keep a running list.)
16. Press "Write"
17. Since we're in Demo mode it will count down and then in the LOG box you'll see operation successful
18. Restart the phone at this point and disconnect the cable
19. Wait until it boots up again and go to "Network Guru" press the 3 dots again and go to Band Locking and you should see the new bands listed
*If you don't press the 3 dots and press Clear forcings and it'll prompt that a power cycle may occur; That's okay, let it, mine did, wait until the phone comes back up and repeat 19 and the new bands should be listed.
20. LET US KNOW ON THIS THREAD what bands are working, what aren't. It will allow us to further play with the device to discover if there's limitations or if further editing is required like in the OP3.
*Please press THANK YOU if this guide was helpful.
**Sorry for the missing of some info in the guide! Seems when I added the HYPERLINK it removed most of the other text before it so it started at #4 instead of the remainder of #1-3
Direct link to RMT STORAGE PATCH:
Rmt Storage Patch Zip
usb debugging should be enabled i think, you didn't mentioned that. " (this will open your OP3 diagnostic port)" and here should be op2 i think. thanks for thread, i have a2005 and want to unlock 20 band(800mhz), will try asap, now i have exams running out of time. btw, so the risk of breaking phone is low right, this steps only modify EFS partition only? so hybrid recovery and flashfire can backup/restore if enything goes wrong
What is the benefit from this? Better reception?
Sent from my ONE A2005 using Tapatalk
So... Are your at&t bands working now? Which bands specifically?
我從使用 Tapatalk 的 Nexus 9 發送
Still something is missing
Hi, I think something is missing. Let me describe what I have done on a A2005:
1- I downloaded the rmt_storage from the link provided on Pre-reqs #3.
2- I backed up EFS, installed the patched rmt_storage, reboot into system.
3- I installed the modified HTC modem driver as unsigned driver, did the adb diag port commands, and the phone is recognized by DFS.
4- On DFS, I must click on SPC 000000 since the log shows errors. I'm not sure if a specific SPC value is required ***
5- When I click on Read, it captures the values, I wanted to add Band 3 (1800) so I checked it and then clicked on write. The logs showed that the write was successful.
6- I restart the phone, connect it and load adb diag port commands again, load DFS, click on read and the values stay
7- When I open Network Guru on locked LTE bands, the list shows me the previous one, as if nothing has been written. I restarted the phone already several times, still no LTE on Band 3.
Besides the SPC code, I might think that:
- The rmt_storage somehow it's not working
- DFS keeps the values but they are not reflected into Network Guru or phone. I already set 4G/3G/2G enabled on the connectivity options. No changes
- Maybe there is another value that needs to be changed with another tool such as QXDM
Any help would be very appreciated!!!
haroldgv said:
Hi, I think something is missing. Let me describe what I have done on a A2005:
1- I downloaded the rmt_storage from the link provided on Pre-reqs #3.
2- I backed up EFS, installed the patched rmt_storage, reboot into system.
3- I installed the modified HTC modem driver as unsigned driver, did the adb diag port commands, and the phone is recognized by DFS.
4- On DFS, I must click on SPC 000000 since the log shows errors. I'm not sure if a specific SPC value is required ***
5- When I click on Read, it captures the values, I wanted to add Band 3 (1800) so I checked it and then clicked on write. The logs showed that the write was successful.
6- I restart the phone, connect it and load adb diag port commands again, load DFS, click on read and the values stay
7- When I open Network Guru on locked LTE bands, the list shows me the previous one, as if nothing has been written. I restarted the phone already several times, still no LTE on Band 3.
Besides the SPC code, I might think that:
- The rmt_storage somehow it's not working
- DFS keeps the values but they are not reflected into Network Guru or phone. I already set 4G/3G/2G enabled on the connectivity options. No changes
- Maybe there is another value that needs to be changed with another tool such as QXDM
Any help would be very appreciated!!!
Click to expand...
Click to collapse
what and where is PRE-REQ #3?
haroldgv said:
Hi, I think something is missing. Let me describe what I have done on a A2005:
1- I downloaded the rmt_storage from the link provided on Pre-reqs #3.
2- I backed up EFS, installed the patched rmt_storage, reboot into system.
3- I installed the modified HTC modem driver as unsigned driver, did the adb diag port commands, and the phone is recognized by DFS.
4- On DFS, I must click on SPC 000000 since the log shows errors. I'm not sure if a specific SPC value is required ***
5- When I click on Read, it captures the values, I wanted to add Band 3 (1800) so I checked it and then clicked on write. The logs showed that the write was successful.
6- I restart the phone, connect it and load adb diag port commands again, load DFS, click on read and the values stay
7- When I open Network Guru on locked LTE bands, the list shows me the previous one, as if nothing has been written. I restarted the phone already several times, still no LTE on Band 3.
Besides the SPC code, I might think that:
- The rmt_storage somehow it's not working
- DFS keeps the values but they are not reflected into Network Guru or phone. I already set 4G/3G/2G enabled on the connectivity options. No changes
- Maybe there is another value that needs to be changed with another tool such as QXDM
Any help would be very appreciated!!!
Click to expand...
Click to collapse
In Network Signal Guru, choose clear forcing. And check the LTE bands again,
or, install Network Signal Guru after you done unlocking, else it will show what it remember on previous set up
---------- Post added at 01:44 PM ---------- Previous post was at 01:43 PM ----------
chxei said:
what and where is PRE-REQ #3?
Click to expand...
Click to collapse
the guide forget to mention that u need to flash rmt storage patch before do any modification,
else no mod will be saved (will revert upon boot)
the patch is in my OP3 thread
Thanks! So today's update:
1- I connected the phone again, ran adb commands, reviewed the bands again on DFS tool and settings stayed. I'm pursuing to enable Band 3
2- I uninstalled Network Signal Guru
3- On Recovery, flashed again the patched rmt_storage, boot the phone, wrote the values again on DFS tool. Reboot phone
4- I installed Network Signal Guru and now it's showing up on the bands lists. I unchecked the bands default on A2005 and used the ones from Eruper/Asia Model as FDD-LTE: Bands 1/3/5/7/8/20 and TDD-LTE: Bands 38/40/41. My provider in Costa Rica (Movistar) uses Band 3 (1800) for their LTE. I clicked on Band locking, clicked on GSM and WDCMA and removed all checks. Then clicked on LTE and left all LTE bands in hopes that it will connect to that frequency. The list shows:
B1: 2100
B3: 1800+
B5: 850
B7: 2600
B8: 900 GSM
B20: 800 DD
B38: TDD2600
B40: TDD 2300
B41: TDD 2500
When I only picked LTE bands as checked, it never resovled to get connected to any cell base.
5- I dialed *#*#4636#*#* to access the information about the phone and monitored the signal setting it up to "LTE Only". No signal on that either
Top of my head, I will restore the qcn backup I made and restore the backup I made for EFS and start again. Now it's saving values after reboot, which is great, but not identifying anything.
Is there any log worth posting here? I read on the OP3 guide that they were restoring a qcn file with bands enabled. Is it worth trying the same?
Anyone that has LTE band 3 enabled would be very appreciated if they post their qcn backup
t99220475 said:
So... Are your at&t bands working now? Which bands specifically?
我從使用 Tapatalk 的 Nexus 9 發送
Click to expand...
Click to collapse
I have not been able to further test as all the phones I compare to that are also AT&T ie: AT&T S6 are connected to the same Bands as me so cannot test til I get to an area where other bands are available currently. Will report back as I can test, but was hoping others can test in the mean time as well.
haroldgv said:
Thanks! So today's update:
Click to expand...
Click to collapse
You shouldn't need to restore any QCN or EFS, just re-check the bands you unchecked and it should pickup all the bands again. Also, confirm your APN is correct to be used with LTE?
Did you get ANY LTE Bands before this mod? Or you only have LTE on Band3?
You can use RAT locking to enable LTE Only rather than unchecking all the WCDMA and GSM bands. that way it'll force LTE, if it doesn't go to the Cellular Network tab and press the Preferred NETWORK to go to LTE ONLY.
sadly for me nothing happened, i have a2005 and want to add band 3 and band 20, did everything 2-3 times whats in a guide, everything went well, write process was comlete but bands didn't added
When you say didn't add, you don't see them in network guru or you see then, but unable to catch signal on them?
aurfawce said:
When you say didn't add, you don't see them in network guru or you see then, but unable to catch signal on them?
Click to expand...
Click to collapse
both, not shown in neywork guru, nor lte signal
chxei said:
both, not shown in neywork guru, nor lte signal
Click to expand...
Click to collapse
You tried to force clear in network guru? If so, when you reconnect and enter diag mode and go to DFS, press bands and LTE, press read, did the changes you made stick?
Just so ppl around here know... there is old forum about band OPT band unlocking with various trials of changing bands, which failed, due to missing RMT patch OR BUT it got MANY juicy info !!!
in the past other users sent me qcn/qcnx files of the EU and CN models ( credit: whoever sent me these files from the old thread ) - I hope this help you out.
keep up the good work ! :good:
gps3dx said:
Just so ppl around here know... there is old forum about band OPT band unlocking.
( un-successful of course due to missing RMT patch OR modem ( on A2005=US) ) with juicy info.
in the past other users sent me qcn/qcnx files of the EU and CN models ( credit: whoever sent me these files from the old thread ) - I hope this help you out.
keep up the good work ! :good:
Click to expand...
Click to collapse
Have you tried what we said here? And tried to see if you can band lock on 3?
I'm going to see the qcn based off of the op3 guide as well as they had to do qcn restoring.
aurfawce said:
Have you tried what we said here? And tried to see if you can band lock on 3?
I'm going to see the qcn based off of the op3 guide as well as they had to do qcn restoring.
Click to expand...
Click to collapse
not yet...it will take me some time, i'm a master's student in exam period.
nontheless, as you can see from the old forum, i'm really interested in opening LTE band 3 on my A2005.
Thanks guys! I live in Venezuela and we use band 3 for LTE and I have the EU version. I'll try this guide today
EDIT: I tried without success, I did all the process but i do not have LTE signal on Band 3. On Network Guru, Band 3 appears as supported. I tried RAT locking but It keeps without signal.
gps3dx said:
Just so ppl around here know... there is old forum about band OPT band unlocking with various trials of changing bands, which failed, due to missing RMT patch OR BUT it got MANY juicy info !!!
in the past other users sent me qcn/qcnx files of the EU and CN models ( credit: whoever sent me these files from the old thread ) - I hope this help you out.
keep up the good work ! :good:
Click to expand...
Click to collapse
Thank you for the qcn files. I've tried it, and it overwrites my imei, which is expected. Then I tried to replace the imei with mine by hex editor, but flashing the modified qcn still overwrites my imei. We may get into the same trouble with op3, which is the imei encryption.
hey guys i succuesfully unlock lte bands of mi5 64gb version:good:. i
purcase the same from china. cause here(india) is only 32gb
version is available which is already equiped with
1,3,5,7,38,39,40,41 of lte bands , but the version belongs to
china missing lte band 5 .i use 4g network who use 3,5,40 lte
bands, band 5 is mostly used for rural area me too from that area
and absence of band 5 there is no network on mi5. i google my
problem and go
1.here:https://forum.xda-developers.com/showpost.php?
p=64675180&postcount=11
2.here:http://en.miui.com/thread-311977-1-1.html
3.here: https://forum.xda-developers.com/mi-note-
pro/general/how-to-unlock-lte-frequency-bands-mi-t3215880.
and study the artical very deeply to avoid brick the device. i
use the idea and do what they said on above said sites. but with
no success every time.these artical are very helpfull for me to
get the main idea and communicate direct with the pones modem and
unlock lte band cause they all are lock or restrict with
software.
1.root the device (necessary only if you want to see which lte
bands are open in your device with the help of network signal
guru apk)
2.install adb and fastboot driver(enable usb debugging)
3.install qualcomm driver .(google it) and write mi5.qcn file
with the help of qpst software after dialing (*#*#717717#*#*)to
enter diag mode.
4.change the value of line 06828 (lte_bc_config) to 2061853925599
but believe me guys there is no succuss every time edited the
same.
next step is all my... i search and edit my self and unlock lte
bands which i know how important for me.many people struggling
like me to unlock but they are far away. i dind't prove here that
iam genius, but i work very hard to achieved.please do not copy
and modified this artical.if you like my work than hit like
button:good:.
5.one thing i clear to all iam not responsible if your device is
bricked due to any wrong step. plz read carefully to avoid. lets
play with lte bands plz go to line no 65633 that is lte band
preference line. and feel free to change the value after read and
change it to 0x111101E111110045 and write. plz follow no.4 step
also before to do this(plz copy the original value in safe place
if any thing goes wrong than revert back with that easily.
all done:angel:
after that restart the phone as regular restart.i personally
tested this on my mi5 64 gb there is no need to root the device
cause you found signal that is important even not to see what lte
bands are working after follow this....
this is only my hard work not a copy of any other person from
this and other forum, and all credit goes to me only lol>>..:laugh:
if you want lte band of your choice then plz. use nv calculator
to find your suit.and replace with value of step no. 4, any doubt please ask.
Tried it but doesn't work - I only see LTE band 7 as before. Can you post screenshots in an app like Network Signal Guru?
Hm, it's interesting, but can you share some evidence of your work? Like Signal Guru screen and overall explanation?
I Would try that after some proofing screenshot.
vicky12065 said:
hey guys i succuesfully unlock lte bands of mi5 64gb version:good:. i
purcase the same from china. cause here(india) is only 32gb
version is available which is already equiped with
1,3,5,7,38,39,40,41 of lte bands , but the version belongs to
china missing lte band 5 .i use 4g network who use 3,5,40 lte
bands, band 5 is mostly used for rural area me too from that area
and absence of band 5 there is no network on mi5. i google my
problem and go
1.here:https://forum.xda-developers.com/showpost.php?
p=64675180&postcount=11
2.here:http://en.miui.com/thread-311977-1-1.html
3.here: https://forum.xda-developers.com/mi-note-
pro/general/how-to-unlock-lte-frequency-bands-mi-t3215880.
and study the artical very deeply to avoid brick the device. i
use the idea and do what they said on above said sites. but with
no success every time.these artical are very helpfull for me to
get the main idea and communicate direct with the pones modem and
unlock lte band cause they all are lock or restrict with
software.
1.root the device (necessary only if you want to see which lte
bands are open in your device with the help of network signal
guru apk)
2.install adb and fastboot driver(enable usb debugging)
3.install qualcomm driver .(google it) and write mi5.qcn file
with the help of qpst software after dialing (*#*#717717#*#*)to
enter diag mode.
4.change the value of line 06828 (lte_bc_config) to 2061853925599
but believe me guys there is no succuss every time edited the
same.
next step is all my... i search and edit my self and unlock lte
bands which i know how important for me.many people struggling
like me to unlock but they are far away. i dind't prove here that
iam genius, but i work very hard to achieved.please do not copy
and modified this artical.if you like my work than hit like
button:good:.
5.one thing i clear to all iam not responsible if your device is
bricked due to any wrong step. plz read carefully to avoid. lets
play with lte bands plz go to line no 65633 that is lte band
preference line. and feel free to change the value after read and
change it to 0x111101E111110045 and write. plz follow no.4 step
also before to do this(plz copy the original value in safe place
if any thing goes wrong than revert back with that easily.
all done:angel:
after that restart the phone as regular restart.i personally
tested this on my mi5 64 gb there is no need to root the device
cause you found signal that is important even not to see what lte
bands are working after follow this....
this is only my hard work not a copy of any other person from
this and other forum, and all credit goes to me only lol>>..:laugh:
if you want lte band of your choice then plz. use nv calculator
to find your suit.and replace with value of step no. 4, any doubt please ask.
Click to expand...
Click to collapse
Can you post some proofs man?
Sorry guys iam busy with some personal work .. Definitely i revert....after some time....
vicky12065 said:
Sorry guys iam busy with some personal work .. Definitely i revert....after some time....
Click to expand...
Click to collapse
Can you include your rom version? I think this work for developer rom while most global isnt supported.
hi OP, any screenshot proof?
Hi,
Can someone post the carrier policy files of the LG V60 LMV600EA version ?
I need this files to enable carrier aggregation on my canadian V60.
Thanks
leptdre said:
Hi,
Can someone post the carrier policy files of the LG V60 LMV600EA version ?
I need this files to enable carrier aggregation on my canadian V60.
Thanks
Click to expand...
Click to collapse
I would like to help you but i have no idea where to find that file. i have the european v60.
[email protected] said:
I would like to help you but i have no idea where to find that file. i have the european v60.
Click to expand...
Click to collapse
Thank you so much for offering your help.
Actually, it is not a difficult process to extract that file.
First thing needed is to install QPST and enable the phone serial port.
After that, you need to open a program called EFS Explorer and then extract the files.
You can find a video that explains the process here
LG-V60 - Google Drive
drive.google.com
leptdre said:
Thank you so much for offering your help.
Actually, it is not a difficult process to extract that file.
First thing needed is to install QPST and enable the phone serial port.
After that, you need to open a program called EFS Explorer and then extract the files.
You can find a video that explains the process here
LG-V60 - Google Drive
drive.google.com
Click to expand...
Click to collapse
Done! hopefully it helps in your process!!
what was this for?
Hi, can you please chare your rfnv files as it is shown in this video ? https://drive.google.com/drive/folders/1YeDpBC-mxATynh7ue3nxKuC3uf6hFMKx
Thank you
[email protected] said:
Done! hopefully it helps in your process!!
Click to expand...
Click to collapse
Hi there would you be able to upload the files somewhere please? Or send them to me if possibe?
@leptdre , were you able to use the files to enable carrier aggregation? Would you be able to upload them somewhere?
Thanks
leptdre said:
Thank you so much for offering your help.
Actually, it is not a difficult process to extract that file.
First thing needed is to install QPST and enable the phone serial port.
After that, you need to open a program called EFS Explorer and then extract the files.
You can find a video that explains the process here
LG-V60 - Google Drive
drive.google.com
Click to expand...
Click to collapse
How are you enabling the V60 serial port. I'm having issues getting it to show up as diag
ebowen 747 said:
How are you enabling the V60 serial port. I'm having issues getting it to show up as diag
Click to expand...
Click to collapse
After installing the Qualcomm drivers, you will see LG Diagnostic Port, and LG Serial Port in device manager. Manually update/replace the serial port driver with Qualcomm HS-USB Diagnostics 9025. Then in the phone hidden menu you have to turn off the diag port under SVC, Port Check Test as shown in the video above. Then it should show up in QPST and EFS explorer
cheesyzombie said:
After installing the Qualcomm drivers, you will see LG Diagnostic Port, and LG Serial Port in device manager. Manually update/replace the serial port driver with Qualcomm HS-USB Diagnostics 9025. Then in the phone hidden menu you have to turn off the diag port under SVC, Port Check Test as shown in the video above. Then it should show up in QPST and EFS explorer
Click to expand...
Click to collapse
Is this with the device in regular boot or edl?
ebowen 747 said:
Is this with the device in regular boot or edl?
Click to expand...
Click to collapse
Regular
cheesyzombie said:
Regular
Click to expand...
Click to collapse
Thank you for your help
leptdre said:
Hi,
Can someone post the carrier policy files of the LG V60 LMV600EA version ?
I need this files to enable carrier aggregation on my canadian V60.
Thanks
Click to expand...
Click to collapse
I have all the carrier_policy.xml files, TM VM EA. But I have some questions first. In which country and what is the name of the Carrier? The only reason I'm asking is: As far as I know, nobody in the US has crossflashed (most have been crossflashing the lmv600am) and really been able to get a 5G signal. Yes, I know it may have the 5G moniker on the taskbar but using Netmonster tells a different story, as do other tools. It's 4g masquerading as 5g. For example, on the v50/v60 on tmob network, using b66 shows it's 5g when it really isn't. When you crossflash with a KDZ the efs partition is not overwritten nor should it be because it contains imei info. Any file (carrier_policy.xml as an example) in the efs to be change has to be DL from the efs partition using Qspt, edit, and then reloaded. Show are you really getting a 5g band on your phone??????
hooutoo said:
I have all the carrier_policy.xml files, TM VM EA. But I have some questions first. In which country and what is the name of the Carrier? The only reason I'm asking is: As far as I know, nobody in the US has crossflashed (most have been crossflashing the lmv600am) and really been able to get a 5G signal. Yes, I know it may have the 5G moniker on the taskbar but using Netmonster tells a different story, as do other tools. It's 4g masquerading as 5g. For example, on the v50/v60 on tmob network, using b66 shows it's 5g when it really isn't. When you crossflash with a KDZ the efs partition is not overwritten nor should it be because it contains imei info. Any file (carrier_policy.xml as an example) in the efs to be change has to be DL from the efs partition using Qspt, edit, and then reloaded. Show are you really getting a 5g band on your phone??????
Click to expand...
Click to collapse
I've been trying forever to get this to work with my ATT with stock FW and when crossflashed to EA, and you're right, I think it just doesn't, regardless of fw version installed. I've pulled the EA EFS policy files as well as the ATT ones, modified them, reuploaded and 5G just will not turn on. I've persisted so long because this method worked fine on my V50, however that one is a V500N (korean variant) whereas this is a V600AM (US/ATT variant), so I think that may have something to do with it. Have tried adding MCC-MNC, editing the rf_band lists, all sorts of combinations. I have a feeling that when the sim is inserted the phone doesn't even look at the modified xml files in the EFS partition and just generates it's own with the american models, but this is just speculation.
The other thing I noticed is that when I edit my ftm file to regain my serial number and remove the NT code error, the outer screen on the dual screen attachment works again, but then I lose 4G altogether and revert to 3G without data.
On my V50 all I had to do was add '5G' to some band lists and it worked, however, that unit is not crossflashed and still has stock korean firmware.
I'm in UK on Hutchison 3 network
cheesyzombie said:
I've been trying forever to get this to work with my ATT with stock FW and when crossflashed to EA, and you're right, I think it just doesn't, regardless of fw version installed. I've pulled the EA EFS policy files as well as the ATT ones, modified them, reuploaded and 5G just will not turn on. I've persisted so long because this method worked fine on my V50, however that one is a V500N (korean variant) whereas this is a V600AM (US/ATT variant), so I think that may have something to do with it. Have tried adding MCC-MNC, editing the rf_band lists, all sorts of combinations. I have a feeling that when the sim is inserted the phone doesn't even look at the modified xml files in the EFS partition and just generates it's own with the american models, but this is just speculation.
The other thing I noticed is that when I edit my ftm file to regain my serial number and remove the NT code error, the outer screen on the dual screen attachment works again, but then I lose 4G altogether and revert to 3G without data.
On my V50 all I had to do was add '5G' to some band lists and it worked, however, that unit is not crossflashed and still has stock korean firmware.
I'm in UK on Hutchison 3 network
Click to expand...
Click to collapse
Well I can tell you that there's a running discussion on a lot of the points you just made not the least of which is whether or not the modem is being provisioned at activation and if so what exactly and how much.
I have 2 lmv600am which I got off Ebay. Both had been crossed to EA fw when I got them. Since I'm on Google Fi, I went to the AT&T unlocking site and Sim unlocked. I then put my G-Fi sim into 1 of my v60 and sure enough I get a 5G moniker on my taskbar. Now during this time period Tmob is changing their policies on LG phones, mainly since LG is no longer in business. For example, lmv450 no longer actives on Tmob nor any of it's mvno's and I believe the same is happening for all Sprint phones plus all LG non-tmob phones. They're checking by imei.
So it didn't take long and bam, I wasn't even getting a 5g moniker. I call G-Fi and asked, WTF. I was told that G-Fi is now only allowing Google and Samsung phones to activate with 5G services, only 4g for V600am. Once again imei strikes. BTW you can page thru modem protocols here; *#546368#*600#>field test>modem settings>engineering mode to see if you even have the 5g protocol loaded. I use to but now I only have 2g, 3g, hspa and lte.
The only reason I'm bringing all this up is because Carrier Policies are changing with LG phones so It's worth a tech support call/chat with your carrier to see what's what on their side.
The next step would be to use a serious network app to verify what really going on. I think in your area the G-Mon app is being used a lot. I use Netmonster in the US. I saw a screen shot from a guy in Poland, I believe, that thought he was getting 5g only to find out that it was really lte+ 3xCA. He was getting 727.3 Mbps on the DL which is absolutely screaming. That’s faster than 99.9 % of the phones in the US.
hooutoo said:
Well I can tell you that there's a running discussion on a lot of the points you just made not the least of which is whether or not the modem is being provisioned at activation and if so what exactly and how much.
I have 2 lmv600am which I got off Ebay. Both had been crossed to EA fw when I got them. Since I'm on Google Fi, I went to the AT&T unlocking site and Sim unlocked. I then put my G-Fi sim into 1 of my v60 and sure enough I get a 5G moniker on my taskbar. Now during this time period Tmob is changing their policies on LG phones, mainly since LG is no longer in business. For example, lmv450 no longer actives on Tmob nor any of it's mvno's and I believe the same is happening for all Sprint phones plus all LG non-tmob phones. They're checking by imei.
So it didn't take long and bam, I wasn't even getting a 5g moniker. I call G-Fi and asked, WTF. I was told that G-Fi is now only allowing Google and Samsung phones to activate with 5G services, only 4g for V600am. Once again imei strikes. BTW you can page thru modem protocols here; *#546368#*600#>field test>modem settings>engineering mode to see if you even have the 5g protocol loaded. I use to but now I only have 2g, 3g, hspa and lte.
The only reason I'm bringing all this up is because Carrier Policies are changing with LG phones so It's worth a tech support call/chat with your carrier to see what's what on their side.
The next step would be to use a serious network app to verify what really going on. I think in your area the G-Mon app is being used a lot. I use Netmonster in the US. I saw a screen shot from a guy in Poland, I believe, that thought he was getting 5g only to find out that it was really lte+ 3xCA. He was getting 727.3 Mbps on the DL which is absolutely screaming. That’s faster than 99.9 % of the phones in the US.
Click to expand...
Click to collapse
Forgot to mention that I noticed that after a fresh flash, the xml files present in the EFS are different before and after inserting my sim.
Interesting but also disappointing to hear about the IMEI checking :/
I've been through hidden menu settings, and depending on which firmware I have installed I can see different bands and modem protocols available/activated, but can still never turn 5G on with my american V60's.
I had so much hope for this handset since firehose was made available!
Which reminds me, I even bootloader unlocked and rooted my crossflashed at&t unit. Successfully install Magisk etc, but couldn't enable r/w on system partition, even after generating and flashing a modified super partition. Something else going on here.
YOU need to check out the v60 group over on Discord.
cheesyzombie said:
Forgot to mention that I noticed that after a fresh flash, the xml files present in the EFS are different before and after inserting my sim.
Interesting but also disappointing to hear about the IMEI checking :/
I've been through hidden menu settings, and depending on which firmware I have installed I can see different bands and modem protocols available/activated, but can still never turn 5G on with my american V60's.
I had so much hope for this handset since firehose was made available!
Which reminds me, I even bootloader unlocked and rooted my crossflashed at&t unit. Successfully install Magisk etc, but couldn't enable r/w on system partition, even after generating and flashing a modified super partition. Something else going on here.
Click to expand...
Click to collapse
Increase the partition expansion to 300 or 400
hooutoo said:
YOU need to check out the v60 group over on Discord.
Click to expand...
Click to collapse
Hah I'm in the group, noticed a couple of your messages after the last post. I'm zobocop
ebowen 747 said:
Increase the partition expansion to 300 or 400
Click to expand...
Click to collapse
How do you change partition sizes?