(All credit goes to wanam for providing Xposed for TouchWiz roms)
I am not sure if this needs a thread but since i was searching for this information i'm making one for the Xposed fans with an A3 2017.
Because i don't have enough time to test more configurations i can't say if this will or will not work on any other configuration besides the one i have. Feel free to backup everything (using a recovery like TWRP or CWM) and try flashing Xposed yourself. Read the bottom of the post on how to get into your recovery when having a bootloop. I do not take any responsibility for bricked devices and any other damages.
I mostly followed the steps in this thread but i'll write the steps here as well.
This will only work with stock or stock-based roms, for AOSP based roms, use normal Xposed flashables
A recovery like CWM or TWRP (guide) is required.
Backup your /system partition or reckon that you might lose data. Flashing Xposed only affects /system
Install the Xposed 3.1 apk (requires "Unknown sources" to be allowed in system settings)
Go to your recovery by shutting down your phone and holding Volume Up + Home while powering it on
Flash this zip file for Xposed on Samsung devices (ARM). You might find newer versions here (choose ARM for this phone, not ARM64).
Reboot and wait for up to 15 minutes. It might bootloop a couple times and you might have to wait for app optimization for some more minutes
Enjoy the flexibility of Xposed
If your device is bootlooping for more than 10 minutes it's highly likely that Xposed is not working for you.
Note that using Volume Down + Power will restart your device but will always attempt to restart Android. In order to get to your recovery charge your device which will make VolDown + Power shut down the phone instead of restarting it. From there you can VolUp + Home and power it on to boot into recovery.
You can attempt to flash the uninstaller in order to fix the bootloop or if Xposed is just not working and you wanna get rid of it. If that doesn't help, restore your backup (will always work, flashing the uninstaller is just quicker).
Known bugs on the A3 2017:
- none (will add from comments or if i find any)
Sources:
https://github.com/wanam/Xposed
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
https://forum.xda-developers.com/sa.../samsung-sm-a520f-2017-kernel-source-t3557622
Hello,
why is arm64 version not working / 64bit ist not recognised by xposed?
It's definitely a 64bit CPU with arm64v8a instruction set (Aarch64).
So why the installation of arm64 is blocked?
SinusStudios said:
(All credit goes to wanam for providing Xposed for TouchWiz roms)
I am not sure if this needs a thread but since i was searching for this information i'm making one for the Xposed fans with an A3 2017.
Because i don't have enough time to test more configurations i can't say if this will or will not work on any other configuration besides the one i have. Feel free to backup everything (using a recovery like TWRP or CWM) and try flashing Xposed yourself. Read the bottom of the post on how to get into your recovery when having a bootloop. I do not take any responsibility for bricked devices and any other damages.
I mostly followed the steps in this thread but i'll write the steps here as well.
This will only work with stock or stock-based roms, for AOSP based roms, use normal Xposed flashables
A recovery like CWM or TWRP (guide) is required.
Backup your /system partition or reckon that you might lose data. Flashing Xposed only affects /system
Install the Xposed 3.1 apk (requires "Unknown sources" to be allowed in system settings)
Go to your recovery by shutting down your phone and holding Volume Up + Home while powering it on
Flash this zip file for Xposed on Samsung devices (ARM). You might find newer versions here (choose ARM for this phone, not ARM64).
Reboot and wait for up to 15 minutes. It might bootloop a couple times and you might have to wait for app optimization for some more minutes
Enjoy the flexibility of Xposed
If your device is bootlooping for more than 10 minutes it's highly likely that Xposed is not working for you.
Note that using Volume Down + Power will restart your device but will always attempt to restart Android. In order to get to your recovery charge your device which will make VolDown + Power shut down the phone instead of restarting it. From there you can VolUp + Home and power it on to boot into recovery.
You can attempt to flash the uninstaller in order to fix the bootloop or if Xposed is just not working and you wanna get rid of it. If that doesn't help, restore your backup (will always work, flashing the uninstaller is just quicker).
Known bugs on the A3 2017:
- none (will add from comments or if i find any)
Sources:
https://github.com/wanam/Xposed
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
https://forum.xda-developers.com/sa.../samsung-sm-a520f-2017-kernel-source-t3557622
Click to expand...
Click to collapse
knzsys said:
Hello,
why is arm64 version not working / 64bit ist not recognised by xposed?
It's definitely a 64bit CPU with arm64v8a instruction set (Aarch64).
So why the installation of arm64 is blocked?
Click to expand...
Click to collapse
To be honest i flashed 32 bit xposed because i searched for the phones architecture and found 32 bit but that must be a misinformation.
I'm surprised now that it's working on my phone!
Thanks for mentioning this, if you have time feel free to safely try out both versions and report back what's working and what's not.
knzsys said:
why is arm64 version not working / 64bit ist not recognised by xposed?
It's definitely a 64bit CPU with arm64v8a instruction set (Aarch64).
So why the installation of arm64 is blocked?
Click to expand...
Click to collapse
Can't find a reason why our 64-bit phone is not recognized bit the 64-bit Xposed
I you want to install the 64-bit Xposed: got through Magisk
Don't know if it has a direct link: had lotz of reboot with 32-bit Xposed; nearly no reboot with 64-bit Xposed.
PS: Don't get too addict to Xposed has it will stop running when we'll get Nougat
The 64bit version will not work because Samsung shipped the SM-A320F with 32bit Android, even though it has a 64bit-capable SoC.
Im Wondering something here ... 32 bit os on our phone, no custom roms .. etc ... but the J7 2016 has the same CPU, same ram, storage, screen res ... you get the point .. i just wonder if a rom from that would ... and its 64 bit ... i mean, its the same damm SoC
are there any news for android 7 to get xposed without magisk. I have supersu root
y2kadir said:
are there any news for android 7 to get xposed without magisk. I have supersu root
Click to expand...
Click to collapse
Yes, you just have to search the Xposed thread and read.
Pat750 said:
Yes, you just have to search the Xposed thread and read.
Click to expand...
Click to collapse
ok but I just did it and coulnd`t find anything. can you tell me where to find?
y2kadir said:
ok but I just did it and coulnd`t find anything. can you tell me where to find?
Click to expand...
Click to collapse
Well I did, but if you can't even find it, I think it's better for you not to use it. Sorry.
Pat750 said:
Well I did, but if you can't even find it, I think it's better for you not to use it. Sorry.
Click to expand...
Click to collapse
why are you talking foolish ****. if you don't wanna help other people go home.
y2kadir said:
why are you talking foolish ****. if you don't wanna help other people go home.
Click to expand...
Click to collapse
OK here's something to start with.
https://forum.xda-developers.com/showthread.php?t=3034811
but please read the threads there are some good advice's.
Pat750 said:
OK here's something to start with.
https://forum.xda-developers.com/showthread.php?t=3034811
but please read the threads there are some good advice's.
Click to expand...
Click to collapse
I only found this in the thread "The first fixes have found their way into version 88.1, only available for Nougat. That includes especially some fixes for Samsung ROMs, but might also fix bootloops and slowdowns on other devices. Besides that, I think I fixed a MIUI incompatibility, not sure if it works now (and to be honest, I don't give much priority to MIUI). There are still unfixed issues on the queue, and again, please keep reporting whatever you find." but this information is not confirming me that its working.
Related
I've been waiting for a custom ROM, haven't quite learned to make one myself. I've tried finding a compatible Xposed with no luck. The only things I have been able to do are debloat and add Viper/Dolby sound mods that added volume boosts. Please feel free to add any trials and errors you guys have had trying to mod this phone here.
packydavis said:
I've been waiting for a custom ROM, haven't quite learned to make one myself. I've tried finding a compatible Xposed with no luck. The only things I have been able to do are debloat and add Viper/Dolby sound mods that added volume boosts. Please feel free to add any trials and errors you guys have had trying to mod this phone here.
Click to expand...
Click to collapse
There are plenty of tutorials for making your own rom and kerenel. There are plenty in xda university and an excellent one by my colleague jackeagle, if you want something device specific then it maybe better to add the phone title in your op rather than just adding a tag
Regards
Sawdoctor
LG Aristo
No ROMs, no real mods and the only progress we have towards a kernel is KyleBryant's work delivering us the kernel source itself.
JustLee said:
Dang Any tips for editing the power button on the back of the phone
Click to expand...
Click to collapse
What do you mean by editing the power button? Like how it functions or it's response upon being held down?
Substratum
Hey, just so you guys know, Substratum works once you're rooted. Just go to the Play Store and download the Substratum app along with a theme of your liking. I'll post some screenshots of my Aristo all theme translucent.
mustangtim49 said:
Hey, just so you guys know, Substratum works once you're rooted. Just go to the Play Store and download the Substratum app along with a theme of your liking. I'll post some screenshots of my Aristo all theme translucent.
Click to expand...
Click to collapse
I'd recommend against using it with certain themes.
I ended up breaking my status bar so now when I hit the settings button from the pull down, it activated gps instead.
MODS
Changed BootAnimation .zip to Cyanogenmod version
Added Viper4Divine FX + DivineEQ + Dolby Atmos
Apps Added into system:
AdAway
Camera FV-5
ES File Explorer
EvolveSMS
FlySo
GhostKik
Instagram
Kik
NovaLauncher
PowerManager
Pulsar+
Removed from system:
All LG Home Apps (FIRST replace with Launcher of your choice E.G. Nova or ADW)
Lookout
All Google but Play Store, Play Services, Play Games, Gmail, YouTube, Maps, and Drive.
All LG apps but SmartWorld (yes including Messaging)
And removed more but they were minor and cant remember...
DivineEQ is blank when loaded so far.
ES File Explorer clears its "history" every time i exit the app. But major settings stick.
I know its nothing major. If I knew Android Developing, I would create a custom rom.
https://forum.xda-developers.com/android/development/rom-ipioneer-stock-10i-v1-t3637393
xtremelora said:
https://forum.xda-developers.com/android/development/rom-ipioneer-stock-10i-v1-t3637393
Click to expand...
Click to collapse
Good look, but the is for the lv3. I've already tried and it won't work due to twrp doing a check on model version and build version sadly.
ninjasinabag said:
Good look, but the is for the lv3. I've already tried and it won't work due to twrp doing a check on model version and build version sadly.
Click to expand...
Click to collapse
As I said on the OP of that thread, check the specifications at the end.
Of course, it is for the MetroPCS version, I make it clear where it says:
Carrier: MetroPCS
And I also mention the twrp limitations and the fix.
Besides that, I am going to start building an slim version (very slim) and at the same time if anyone can provide me a T-mobile/Other Carrier Nandroid I can build slim versions of that for you guys.
xtremelora said:
As I said on the OP of that thread, check the specifications at the end.
Of course, it is for the MetroPCS version, I make it clear where it says:
Carrier: MetroPCS
And I also mention the twrp limitations and the fix.
Besides that, I am going to start building an slim version (very slim) and at the same time if anyone can provide me a T-mobile/Other Carrier Nandroid I can build slim versions of that for you guys.
Click to expand...
Click to collapse
Ooh sh#t, my bad homie.
Well now that I've made a fool of myself, I'mma back up and give this a test.
ninjasinabag said:
I'd recommend against using it with certain themes.
I ended up breaking my status bar so now when I hit the settings button from the pull down, it activated gps instead.
Click to expand...
Click to collapse
That's when you boot into recovery and flash the Substratum.rescue zip and all good, plus, you should have a good nandroid to restore also. So nobody should be afraid to use Substratum, it's perfectly safe if you know your back up plans. Anyone has questions, just reply in this thread and I'll do my best to help anyone.
mustangtim49 said:
That's when you boot into recovery and flash the Substratum.rescue zip and all good, plus, you should have a good nandroid to restore also. So nobody should be afraid to use Substratum, it's perfectly safe if you know your back up plans. Anyone has questions, just reply in this thread and I'll do my best to help anyone.
Click to expand...
Click to collapse
Yeah, I already had that panned out. My comment was a simple heads up about one of the possibilities.
snafu
starting over from scratch currently. everything was correct and working when i first rooted and progressively i messed up. i have no idea how it got so bad or why Ive put up with it for weeks now. i have several nandroid back-ups if anyone wants a headache. but i think my problem is deeper than just the ROM.
Laptop recognizes my LGMS210 as a LGMS550 when in recovery. Code 10 -broken drivers.... *re-flashed the recovery from fastboot [ADB version 1.0.32 Revision eac51f2bb6a8-android] and laptop gave me access to internal and SD but only seeing 9.95g available (6g for sys? is that right)
Google play is broke af. Nothing will install (error -504) even after cleaning data/data. data/apps .. even after dalvik/cache wipe.... even after praying. Not even apps Ive never installed before. LG smart world ie themes,fonts,whatever gives install error.
cant even install apks i have on SD (error-package seems corrupt)
Magisk wont update from ver 2.*.* to ver 16. begins to work but alas error -1 ?
I still have root tho lol
no super su present
and i have xposed framework API 26 installed but i think when using magisk and xposed modules this whole cluster nut began.
android Easter egg wont even work. its stuck with a fish selected, cant change the food offering. and NO cat has ever came.
Boot-loops 3-4 times if not shutdown properly... ie rebooter app or terminal reboot. i changed the default MPCS boot animation so i can see if its looping or chooching. gets thermo-nuclear hot and eventually boots after 4-5 minutes.
i'm gonna go ahead and re-flash stock FW.
*on a side note i keep confusing my PC software like fastboot and adb for my gf's galaxy tab A. Caught a security error brick when i accidentally used its fastboot for something like to unlock bootloader.... i have way too many devices being worked on at once. eh, never a dull moment.
₥ike_grips said:
starting over from scratch currently. everything was correct and working when i first rooted and progressively i messed up. i have no idea how it got so bad or why Ive put up with it for weeks now. i have several nandroid back-ups if anyone wants a headache. but i think my problem is deeper than just the ROM.
Laptop recognizes my LGMS210 as a LGMS550 when in recovery. Code 10 -broken drivers.... *re-flashed the recovery from fastboot [ADB version 1.0.32 Revision eac51f2bb6a8-android] and laptop gave me access to internal and SD but only seeing 9.95g available (6g for sys? is that right)
Google play is broke af. Nothing will install (error -504) even after cleaning data/data. data/apps .. even after dalvik/cache wipe.... even after praying. Not even apps Ive never installed before. LG smart world ie themes,fonts,whatever gives install error.
cant even install apks i have on SD (error-package seems corrupt)
Magisk wont update from ver 2.*.* to ver 16. begins to work but alas error -1 ?
I still have root tho lol
no super su present
and i have xposed framework API 26 installed but i think when using magisk and xposed modules this whole cluster nut began.
android Easter egg wont even work. its stuck with a fish selected, cant change the food offering. and NO cat has ever came.
Boot-loops 3-4 times if not shutdown properly... ie rebooter app or terminal reboot. i changed the default MPCS boot animation so i can see if its looping or chooching. gets thermo-nuclear hot and eventually boots after 4-5 minutes.
i'm gonna go ahead and re-flash stock FW.
*on a side note i keep confusing my PC software like fastboot and adb for my gf's galaxy tab A. Caught a security error brick when i accidentally used its fastboot for something like to unlock bootloader.... i have way too many devices being worked on at once. eh, never a dull moment.
Click to expand...
Click to collapse
You're using the wrong recovery if it's still showing the ms550.
Drivers are universal inside of company devices. (LG for LG, Samsung for Samsung) so they don't conflict.
Adb and fastboot are both universal drivers and shouldn't matter for your device. (I'm using the same fastboot I installed for my Galaxy note 4 that I am for my aristo, my V10, my htc desire 610, and my uncle's v20)
Just do what you said and start fresh.
Unlock the bootloader.
Install the proper twrp and remove encryption.
Flash the stock boot partition and wipe data (this is sneakily pertinent if you're gonna use magisk)
Do not install system mods before using magisk.
After that, use twrp's file explorer to remove and stock apps that you won't need.
Official Oreo has finally been leaked thanks to @NFound and since I've been extensively testing it this thread will be to teach you how to install it and to tell you what works and what doesn't.
Special THANK YOU to @NFound, @raystef66, @DrakenFX, @Oki, @WesTD and to everyone else who has helped with the development of the Axon 7 and with this thread
How to unlock the bootloader?
Follow this guide https://forum.xda-developers.com/axon-7/how-to/guide-unlock-bootloader-easily-t3704595 by @WestTD
Unlocked bootloader message removal:
Have not found a working method yet.
Always backup your intSD before flashing ROMs and other TWRPs (Recoveries)
Stock user, need to install TWRP?
Flash TWRP 3.2.1-0 https://androidfilehost.com/?fid=673791459329066789 by @raystef66
If you already have TWRP installed, any version will do since the ROM will replace it with TWRP 3.2.1-6 after installation.
Installation:
Download: https://androidfilehost.com/?fid=818222786056032764 (I hope this is allowed now, please forgive me if the links is still not allowed by XDA)
Move the .ZIP into your internal memory as you would by moving any other file into your phone through USB.
Boot into TWRP: adb reboot recovery or by turning the phone off and pressing VolUp+Power
Do a full backup!
Wipe to perform a clean install. Recommended.
Press Install
Select the .ZIP
Install with TWRP only! During installation it will be asked which modem you want to install. In my case this was the A2017G but that might not be yours. Please select correctly.
Wipe Cache and Dalvik Do not reboot yet if you want to root.
Rooting Download and install Magisk V16.4 or V16.0 exactly as you just installed the ROM.
Flash the safetynet fix linked below.
Wipe Cache and Dalvik
Reboot
Edit: Changing partitions to ext4 might be necessary for some non-stock users on f2fs.. Still updating
What's not working and how to fix it:
Magisk doesn't pass Safetynet? (ctsProfile: False). Download and flash https://androidfilehost.com/?fid=674106145207489292 Thank you @raystef66
Google play store shows as uncertified? The .ZIP above from @raystef66 fixes this as well. Your device is now certified.
How do I disable force encryption? Go to post #63 by @DrakenFX
Bad battery life? Flash Jojoc V2.1 or V3.1 module within Magisk or via TWRP V3.2 : https://androidfilehost.com/?fid=962187416754476535 V2.1 : https://androidfilehost.com/?fid=673956719939820457 by @raystef66
AdAway cannot install hosts file: Open Magisk -> Settings and select Systemless hosts.
Daydream is not working? Check post #23 B12 Thread by @kountry83 Download: Daydream.zip
How do I enable or disable the Navigation bar?: Check thread [A2017G][TWRP-ZIP]NAVIGATION BAR Enabler/Disabler by @raystef66 or Direct Link download for aroma installer
How do I remove the carrier label and center the clock on the status bar? Check thread [PATCH][A2017X V1.3.0B01] Remove Carrier & Center Clock by @raystef66 Download: A2017X_V1.3.0B01_carrier&clock
Remove carrier label only: Check post #342 by @raystef66 Download: A2017X_V1.3.0B01_carrierremover
Need modems, boot or bootstack? Download below by @raystef66
Modems:
ZTE_A2017X_Oreo_V1.30B01_Gmodem
ZTE_A2017X_Oreo_V1.30B01_Umodem
ZTE_A2017X_Oreo_V1.30B01_CNmodem
Boot:
A2017X-O_beta-B01-boot
Bootstack: twrp 3.2.1.6 included
ZTE_A2017X_V1.3.0B01_OREO_BootStack_twrp3216
What's working:
Pretty much everything other than what I wrote above it seems. The ROM is very fast and stable, my phone feels considerably snappier than it did on stock Nougat and there doesn't seem to be many bugs at all. Only thing I've noticed is the battery life doesn't seem to be great but that could just be some installed apps or my phone. Fixed by Jojoc V3.2 by @raystef66. Link above.
Testing Camera...
Working HDR+ Patch by @NFound: : HDR+ for v1.3.0 B01
GCAM: GCAM
Flashed an older version of that HDR+ Patch by @NFound and does your Magisk not pass the safetynet anymore? Flash this safetynet fix by @raystef66: A2017X-V1.30B01_safetynet_fix_HDR
Dual Sims: Fully working
I'll continue updating the thread according to your feedback and my testing.
Victor13f said:
Official Oreo has finally been leaked thanks to @NFound and since I've been extensively testing it this thread will be to teach you how to install it and to tell you what works and what doesn't.
Thank you @NFound once again for your hard work!
Thank you @Oki for having written https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-custom-oreo-roms-newbies-t3786693 If you need a better guide visit this thread and follow this guide simply using different files and not installing the bootstack separately.
How to unlock the bootloader?
Follow this guide https://forum.xda-developers.com/axon-7/how-to/guide-unlock-bootloader-easily-t3704595 by @WestTD
Unlock boot message removal:
If you want to remove the unlocked bootloader message at boot, you just need TWRP Exclusive. Just boot to recovery and go to the Advanced Menu -> More -> Del Inscription. You must to do this every time you update the bootloader. Thank you @Oki
Need to install TWRP?
Flash TWRP exclusive by @NFound https://androidfilehost.com/?fid=673956719939822011
Installation:
Download: https://androidfilehost.com/?fid=818222786056032764 (I hope this is allowed now, please forgive me if the links is still not allowed by XDA)
Move the .ZIP into your internal memory as you would by moving any other file into your phone through USB.
Boot into TWRP or ADB: adb reboot recovery or by turning the phone off and pressing VolUp+Power
Press Install
Select the .ZIP
Install with TWRP only! During installation it will be asked which bootstack you want to install. In my case this was the A2017G but that might not be yours. Please select correctly.
Wipe Cache and Dalvik Do not reboot yet if you want to root.
Rooting Download and install Magisk V16.4 or V16.0 exactly as you just installed the ROM or with TWRP Exclusive go to Advanced -> More -> Root -> Magisk
Wipe Cache and Dalvik
Reboot
What's not working?:
Magisk root doesn't pass Safetynet (ctsProfile: False). Tested with V16.4, V16.0 and V15.3. None of them passes the safetyNet. Have also tried installing the props module to no avail.
Google play store shows as uncertified (yet all the apps are available and install with no restrictions).
Battery charging light turns off when I turn the screen on and turns back on when the screen is off (Maybe it's intended to be like that, not sure)
What's working:
Pretty much everything other than what I wrote above it seems. The rom is very fast and stable, my phone feels considerably snappier than it did on stock Nougat and there doesn't seem to be many bugs at all. Only thing I've noticed is the battery life doesn't seem to be great but that could just be some installed apps or my phone. I haven't tested the dualsims yet but I will soon and I'll post the result here.
Testing Camera...
I'll continue updating the thread according to your feedback and my testing.
Click to expand...
Click to collapse
Sigh. First of all. Link is not allowed, delete it before we get trouble. Furthermore your guide isn't really helping anyone, since all information can be get in the other thread (nfound announced official oreo). You just snacked away Oki's guide and inserted a different ROM link. Tbf your information about magisk is fine and new, but that's it.
Cool, an easy guide to get you started.
Thanks man.
GabbaGandalf42 said:
Sigh. First of all. Link is not allowed, delete it before we get trouble. Furthermore your guide isn't really helping anyone, since all information can be get in the other thread (nfound announced official oreo). You just snacked away Oki's guide and inserted a different ROM link. Tbf your information about magisk is fine and new, but that's it.
Click to expand...
Click to collapse
I belive the link is allowed. A Forum mod said so on NFounds AEX thread.
I didn't snatch anything. I used guides that exist because they work and I gave props to every single person I could think of. I never claimed this was all my work. Just trying to help other people who want to try the ROM or are interested in how it performs.
I think the rom has something to do with CTS because it's a beta rom. It might not CTS approved. That's why magisk won't work. Similar to Android P DP.
https://developer.android.com/preview/release-notes
However, We can try to change or add ro.build.fingerprint in the build.prop file to the valid one. Not sure that it will work or not.
For example.
Code:
ro.build.fingerprint=ZTE/P996A04_N/ailsa_ii:7.0/NRD90M/20170215.164309:user/release-keys
Can /system be mounted as RW in this rom?
blackpac said:
Can /system be mounted as RW in this rom?
Click to expand...
Click to collapse
You can edit system just from TWRP.
mickey36736 said:
I think the rom has something to do with CTS because it's a beta rom. It might not CTS approved. That's why magisk won't work. Similar to Android P DP.
https://developer.android.com/preview/release-notes
However, We can try to change or add ro.build.fingerprint in the build.prop file to the valid one. Not sure that it will work or not.
For example.
Code:
ro.build.fingerprint=ZTE/P996A04_N/ailsa_ii:7.0/NRD90M/20170215.164309:user/release-keys
Click to expand...
Click to collapse
Didn't work unfortunately. Edited the ro.build.fingerprint and it still failed safetynet check.
SAFETYNET-FIX
Here you go : https://androidfilehost.com/?fid=674106145207489292
Fixes the safetynet - tested on 16.4 and 16.0
raystef66 said:
Here you go : https://androidfilehost.com/?fid=674106145207489292
Fixes the safetynet - tested on 16.4
Click to expand...
Click to collapse
Thank you, it works
all set up and running
Predatorhaze said:
all set up and running
Click to expand...
Click to collapse
How is battery life? Did you get substratum running? How is the sound without v4a and ainur. How is the sound with v4a+ainur?
battery dont know yet,but i dont use any sound mods on stock rom.Didnt try substratum.....i can try,but not gonna use it
GabbaGandalf42 said:
How is battery life? Did you get substratum running? How is the sound without v4a and ainur. How is the sound with v4a+ainur?
Click to expand...
Click to collapse
Accubattery says 5 hours SOT but I have only actually gotten 2. Again, this is probably a problem on my side and not the ROM. I need to check over the installed apps. Overall, actually better than 7.1.1 Nougat IMO since I was getting those bad results there too (Shouldn't have restored all the apps on first start).
Soundwise you shouldn't need anything. It's an official ROM and everything works properly. I haven't tested with any mods and I personally won't.
Victor13f said:
Accubattery says 5 hours SOT but I have only actually gotten 2. Again, this is probably a problem on my side and not the ROM. I need to check over the installed apps. Overall, actually better than 7.1.1 Nougat IMO since I was getting those bad results there too (Shouldn't have restored all the apps on first start).
Soundwise you shouldn't need anything. It's an official ROM and everything works properly. I haven't tested with any mods and I personally won't.
Click to expand...
Click to collapse
Battery doesn't sound too good. And personally I won't try it out until someone checked if substratum works. Cause if substratum works, I am able to enjoy the 'swift Black's theme, which boosts battery life by having real black everywhere. That means that the amoled screen will use less power. Also it's beautiful af and I don't want to miss it
Two questions please:
1. would flashing no-verity-opt-encrypt do anything for this ROM? as in, making encryption optional?
2. would it be a good idea to flash FASTBOOT_UNLOCK_EDL_N if I want to change my recovery now that I am no longer on N?
GabbaGandalf42 said:
Battery doesn't sound too good. And personally I won't try it out until someone checked if substratum works. Cause if substratum works, I am able to enjoy the 'swift Black's theme, which boosts battery life by having real black everywhere. That means that the amoled screen will use less power. Also it's beautiful af and I don't want to miss it
Click to expand...
Click to collapse
Substratum works, used swift black theme 8.0 pixel or nexus
GabbaGandalf42 said:
Battery doesn't sound too good. And personally I won't try it out until someone checked if substratum works. Cause if substratum works, I am able to enjoy the 'swift Black's theme, which boosts battery life by having real black everywhere. That means that the amoled screen will use less power. Also it's beautiful af and I don't want to miss it
Click to expand...
Click to collapse
Batterywise, I flashed the jojoc battery module and it's looking a lot better already
Here is working fine but how do I remove the operator name from the status bar?
Battery is absolutely horrible, coming from a beta tester. If you experience terrible battery it isn't a problem on your side, it's the beta rom. At best, I get barely 3 hours of screen on time only browsing Facebook
Dear All , this method maybe already here somewhere ,
i have tried to root this specific device and i ran into many issues !
but successfully i have done it .
i'll upload the patched file here and i'll mention what method i have done ! ..
unlock boot loader is a must . ( Please read about it in google , All Samsung devices is the same method )
u might repeat the process to times until it successfully unlocked and greyed-out !
Next download this firmware only to be able to run the patched AP .
un-tick Auto-reboot before flashing .
once flash done , power + Volume down to restart , then volume up with power until u boot into the recovery
wipe data . restart . done
to make sure u have done every thing correctly u'll see RED massage once u boot you're device
Firmware ( This is UAE Firmware " T725XXS1ATC5_T725OJM1ASJ3_XSG " ) All Languages included . Link
Patched AP File Link
Please Note that i'm not responsible if u break your Tablet ! .
Proof ( IMG )
GD day :angel:
after rooting is it possible to update firmware to a new one?
moresat said:
after rooting is it possible to update firmware to a new one?
Click to expand...
Click to collapse
No ! ..
Hi
Do I just need to use odin to flash the Firmware you mentioned then use ODIN again to flash the patched ap
I can just add that with this specific fw version and patched ap everything worked on LTE version but I might add my little deviations ...
1st original firmware flash (BL,AP,CP,CSC-non-home one) instantly followed by wipe data in recovery mode.
2nd After the initial setup + wifi connection I installed and updated magisk.
3rd "adb restart bootloader" (here i am not sure if it mattered but anyway) and flush again with the provided Patched AP File (BL,the_patched_AP,CSC - the home one this time ... using CP failed with modem err with me so I just skipped it here)
4th get trough the init setup again with wifi on and open magisk which will install more stuff.
The prerequisites still apply oem unlocked bootloader before you start and keep your battery at least 60-70% since the process drained mine a lot.
You know you are on the right track when you have warning with tablet bootloader is unlocked (at startup yellow) and tablet not running Samsung's official software (red after the first one)
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
chadandchew said:
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
Click to expand...
Click to collapse
The option only shows up when you are connected to the internet.
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
chadandchew said:
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
Click to expand...
Click to collapse
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Thanks for reply. Will try the LOS ROM later. Wish Google crap would disappear totally. I hate it enormously.
By the way which folder am I looking for on that LOS ROM download page
Ah gts4lv I presume
chadandchew said:
Wish Google crap would disappear totally. I hate it enormously.
Click to expand...
Click to collapse
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
topaza said:
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
Click to expand...
Click to collapse
Recently switched to using MicroG Lineage. Timely enough, MicroG passes the SafetyNet now as per the instructions mentioned below and indicated in the attached screenshot. For the fingerprint, I had selected the T720 from the list.
https://www.reddit.com/r/MicroG/comments/shmpng
Along with Aurora store installed as a service, I think you don't need Google anymore.
topaza said:
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Click to expand...
Click to collapse
I'm having some problem here:
I can install LineageOS, I can root/Magisk, I can have TWRP, but not all together at once.
Can you help me on how to do this?
Working on a SM-T725 of course, actually rooted, lineage and TWRP installed, but my Magisk can't install modules, it seems it doens't have root privileges.
Thanks in advance for your answer
anybody have an updated one, the file has been archived on the said link... thanks in advance
Only should work on Android 10 based ROMs
External wifi adapters need custom kernel compiling
I've suffered to get the Kali Nethunter working on custom ROMs
U need free storage available (not sure cuz I've formated data then installed and it's been a while but ig not less than 15 gbytes)
Here are the steps :
1.download the file from offensive security website
(Not sure if external links are allowed but here it is ) : https://www.offensive-security.com/kali-linux-nethunter-download/
(Just look for miui davinci file)
2.Download it and extract on whatever device u want the copy the extracted folder to the roo of the storage (of course not the "/" folder the "storage/emulated/0" one
3. Go into extractedFolder/data/app/
And make sure every app there is installed especially the nethunter.apk
4.copy the "kalifs-arm64-full.tar.xz" file to the root
"storage/emulated/0"
5.Open the Nethunter app and go into chroot manager and install chroot
5.Browse for the file location which you copied into the root "storage/emulated/0" and it will start installing it will take up too 10 to 15 minutes
6.You are done now but HID attacks aren't working
7.Go to USB arsenal and change "reset" into anything that has " hid" untill you see a successful toast message then save config to database
Done.
If it helped you hit the thanks button (your choice)
I'll be available asap if anyone has a question
how about monitor mode on wifi dongle? have you tested it?
yaro666 said:
how about monitor mode on wifi dongle? have you tested it?
Click to expand...
Click to collapse
Monitor mode works by default using the internal card
For external I don't have one to test it now
But I am sure it will work as long as it has a supported chip
batman957 said:
I've suffered to get the Kali Nethunter working on custom ROMs
U need free storage available (not sure cuz I've formated data then installed and it's been a while but ig not less than 15 gbytes)
Here are the steps :
1.download the file from offensive security website
(Not sure if external links are allowed but here it is ) :
(Just look for miui davinci file)
2.Download it and extract on whatever device u want the copy the extracted folder to the roo of the storage (of course not the "/" folder the "storage/emulated/0" one
3. Go into extractedFolder/data/app/
And make sure every app there is installed especially the nethunter.apk
4.copy the "kalifs-arm64-full.tar.xz" file to the root
"storage/emulated/0"
5.Open the Nethunter app and go into chroot manager and install chroot
5.Browse for the file location which you copied into the root "storage/emulated/0" and it will start installing it will take up too 10 to 15 minutes
6.You are done now but HID attacks aren't working
7.Go to USB arsenal and change "reset" into anything that has " hid" untill you see a successful toast message then save config to database
Done.
If it helped you hit the thanks button (your choice)
I'll be available asap if anyone has a question
Click to expand...
Click to collapse
i have a mi 9t with unlocked bootloader twrp also rooted using magisk, i flashed my nethunter kernel, but it gets stuck at the nethunter boot logo, how do i fix this, do i need a specific force encryption or something? ive restored the system couple times using mi flash, ive been trying for a couple days now, if you have any solutions please lmk a step by step guide, also is there a way i can do this without flashing it, but also get all the tools working?
Niksa2 said:
i have a mi 9t with unlocked bootloader twrp also rooted using magisk, i flashed my nethunter kernel, but it gets stuck at the nethunter boot logo, how do i fix this, do i need a specific force encryption or something? ive restored the system couple times using mi flash, ive been trying for a couple days now, if you have any solutions please lmk a step by step guide, also is there a way i can do this without flashing it, but also get all the tools working?
Click to expand...
Click to collapse
Sorry I wish I was able to help
But the tag says [CUSTOM ROM]
SO I HAVE No Idea
Maybe try this
Don't flash any thing just follow the procedure listed above and It may work
Just don't flash anything
It won't work, cuz you need kernel for monitoring for example wifi - stock kernels can't put wlan1 (internal or external) wifi to monitor mode, so you won't be able to pentest routers
batman957 said:
Sorry I wish I was able to help
But the tag says [CUSTOM ROM]
SO I HAVE No Idea
Maybe try this
Don't flash any thing just follow the procedure listed above and It may work
Just don't flash anything
Click to expand...
Click to collapse
Which custom ROM? Is it possible with AOSP based (I am on havoc 3.6 now)
hruaiapunte said:
Which custom ROM? Is it possible with AOSP based (I am on havoc 3.6 now)
Click to expand...
Click to collapse
Any whatever you want
I tested on evoX and titanium os
Niksa2 said:
i have a mi 9t with unlocked bootloader twrp also rooted using magisk, i flashed my nethunter kernel, but it gets stuck at the nethunter boot logo, how do i fix this, do i need a specific force encryption or something? ive restored the system couple times using mi flash, ive been trying for a couple days now, if you have any solutions please lmk a step by step guide, also is there a way i can do this without flashing it, but also get all the tools working?
Click to expand...
Click to collapse
Are you trying to install Nethunter onto stock miui rom?
If so, take a look at
https://forums.kali.org/showthread.php?48308-Xiaomi-Mi-9t-Not-Work-Hid-Monitor-Bad-USB
This worked for me
I'm running full Nethunter on Mi9t stock MiUi Global 11.0.4 rooted with Magisk.zip (via TWRP) and everything just works like a charm. No problems capturing packets, injection support is doing fine and HID seems to work (never tested it but NH App shows its working)
All i had to do was root the Mi9t with Magisk (flashed the zip via TWRP), after checking that everything went well ive booted back into TWRP and flashed the nethunter-2020.2-pre3-davinci-miui-ten-kalifs-full.zip downloaded at https://www.offensive-security.com/kali-linux-nethunter-download/
After that i had to reflash Magisk.zip again (directly after flashing the nethunter.zip without rebooting the device!) and thats it.
As the pre-build images you get at offensive-security allready come with the tweaked kernel u need for injection and monitor mode, theres no need to flash a 'nethunter kernel' afterwards...it works 'out of the box'
Flashing another nethunter kernel afterwards will most probably result in a bootloop... (tried myself a few times with hasty nethunter kernel)
Ive only tried this with the officiall pre-built images on a stock MiUi ROM.
If you want to flash NH on a Costum ROM, you should probably go with the Guide from OP
Happy Hunting
hello, after so many tests they managed like this:
1. twrp orange fox
2.format and wipe
3.flash: fw "miui_DAVINCIGlobal_V11.0.5.0.QFJMIXM_aaab5b40c7_1 0.0.zip" flash "AOSiP-10-Quiche-davinci-20200526-gapps.zip" flash "Magisk-v19.3.zip" flash "Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip"
4.reboot
5.inizializza and upgrade Magisk (download update Magisk to phone)
6.download Busybox module (Magisk)
7.poweroff
8.twrp flash "nethunter-2020.2-davinci-miui-ten-kalifs-full.zip" flash (Magisk downloaded to phone) flash "Disable_Dm-rity_ForceEncrypt_03.04.2020.zip"
9.reboot
HardcodedString said:
Are you trying to install Nethunter onto stock miui rom?
If so, take a look at
https://forums.kali.org/showthread.php?48308-Xiaomi-Mi-9t-Not-Work-Hid-Monitor-Bad-USB
This worked for me
I'm running full Nethunter on Mi9t stock MiUi Global 11.0.4 rooted with Magisk.zip (via TWRP) and everything just works like a charm. No problems capturing packets, injection support is doing fine and HID seems to work (never tested it but NH App shows its working)
All i had to do was root the Mi9t with Magisk (flashed the zip via TWRP), after checking that everything went well ive booted back into TWRP and flashed the nethunter-2020.2-pre3-davinci-miui-ten-kalifs-full.zip downloaded at https://www.offensive-security.com/kali-linux-nethunter-download/
After that i had to reflash Magisk.zip again (directly after flashing the nethunter.zip without rebooting the device!) and thats it.
As the pre-build images you get at offensive-security allready come with the tweaked kernel u need for injection and monitor mode, theres no need to flash a 'nethunter kernel' afterwards...it works 'out of the box'
Flashing another nethunter kernel afterwards will most probably result in a bootloop... (tried myself a few times with hasty nethunter kernel)
Ive only tried this with the officiall pre-built images on a stock MiUi ROM.
If you want to flash NH on a Costum ROM, you should probably go with the Guide from OP
Happy Hunting
Click to expand...
Click to collapse
henghst69 said:
1. twrp orange fox
2.format and wipe
3.flash: fw "miui_DAVINCIGlobal_V11.0.5.0.QFJMIXM_aaab5b40c7_1 0.0.zip" flash "AOSiP-10-Quiche-davinci-20200526-gapps.zip" flash "Magisk-v19.3.zip" flash "Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip"
4.reboot
5.inizializza and upgrade Magisk (download update Magisk to phone)
6.download Busybox module (Magisk)
7.poweroff
8.twrp flash "nethunter-2020.2-davinci-miui-ten-kalifs-full.zip" flash (Magisk downloaded to phone) flash "Disable_Dm-rity_ForceEncrypt_03.04.2020.zip"
9.reboot
Click to expand...
Click to collapse
Does Kali work with QFJEUXM 11.0.5?
By following the cited guide
https://forums.kali.org/showthread.php?48308-Xiaomi-Mi-9t-Not-Work-Hid-Monitor-Bad-USB
I don't see anything about:
- Format Data and wipe
Is it necessary?
-"AOSiP-10-Quiche-davinci-20200526-gapps.zip
Is it necessary to flash, maybe Kali breaks the stock built-in GApps?
-"Disable_Dm-rity_ForceEncrypt_03.04.2020.zip"
Is it also necessary to flash, Magisk cannot make it pass SafetyNet without?
Also, does installing Kali affect:
- Widevine L1 (dropping to L3)
- 4G/4G+ (by disabling some bands or carrier aggregation)?
One more question, what would be a procedure to go back to stock?
Manually updating to the stock Recovery/ZIP firmware from System update/Choose update package would be enough or flashing Fastboot/TGZ firmware by Mi Flash Tool will be needed?
zgfg said:
Does Kali work with QFJEUXM 11.0.5?
By following the cited guide
https://forums.kali.org/showthread.php?48308-Xiaomi-Mi-9t-Not-Work-Hid-Monitor-Bad-USB
I don't see anything about:
- Format Data and wipe
Is it necessary?
-"AOSiP-10-Quiche-davinci-20200526-gapps.zip
Is it necessary to flash, maybe Kali breaks the stock built-in GApps?
-"Disable_Dm-rity_ForceEncrypt_03.04.2020.zip"
Is it also necessary to flash, Magisk cannot make it pass SafetyNet without?
Also, does installing Kali affect:
- Widevine L1 (dropping to L3)
- 4G/4G+ (by disabling some bands or carrier aggregation)?
One more question, what would be a procedure to go back to stock?
Manually updating to the stock Recovery/ZIP firmware from System update/Choose update package would be enough or flashing Fastboot/TGZ firmware by Mi Flash Tool will be needed?
Click to expand...
Click to collapse
-Does Kali work with QFJEUXM 11.0.5?
Well, somewhere i've read that it should work with 11.0.5 too but dont remember where...would have to search for it again to provide a link to you...
- Format Data and wipe
Not sure if its necessary, but i did so. Its always a good thing to do before flashing any ROM.
Just try it without that step and you'll see...you can always reflash to stock if you get any errors, so just give it a shot mate
-"AOSiP-10-Quiche-davinci-20200526-gapps.zip
Nope, thats not necessary for sure. I'm using it with the stock built gapps and its working fine
-Disable_Dm-rity_ForceEncrypt_03.04.2020.zip
Thats pretty strange with that ForceEncrypt step, some say they had to others not. I did not flash it to be honest and everythings okay so far. But theres a Chance that you will have to! Maybe it belongs to which ROM you are using (global,eu,chinese) but cant tell for sure...
So this one you will have to figure out yourself, sry.
-4G and LTE is working good for me, so i'd say kali isnt affecting it
-About Widefine, well i dont know to be honest...im watching Prime and Sky Go on the Phone sometimes but for the Quality Prime just says 'optimal' and Sky Go 'HD'...it looks great for sure but i cant tell the exact Quality....if theres a way to check that, let me know and i'll be happy to do that for you
-One more question, what would be a procedure to go back to stock?
I would just do a wipe/format and flash the stock MiUI image or better, your backup via TWRP (or any other custom Recovery)
For me, Fastboot by MiFlashTool is always the last option. If nothing else works, Fastboot is a Livesaver but thats just 'my way' of doing it, there are probably many others who say otherwise!
Sometimes it needs a lot of testing to figure out the best way for your specific device, so always do a backup and flash a custom recovery before flashing Nethunter. That way, its always posible to get back to Stock if you encounter any bootloops/problems after the installation.
Its like always while playing around with any OS...if it wont work, you just have to "Try Harder"
Im happy to help anyway, if you got any more Questions just shout out mate
HardcodedString said:
-Does Kali work with QFJEUXM 11.0.5?
Well, somewhere i've read that it should work with 11.0.5 too but dont remember where...would have to search for it again to provide a link to you...
- Format Data and wipe
Not sure if its necessary, but i did so. Its always a good thing to do before flashing any ROM.
Just try it without that step and you'll see...you can always reflash to stock if you get any errors, so just give it a shot mate
-"AOSiP-10-Quiche-davinci-20200526-gapps.zip
Nope, thats not necessary for sure. I'm using it with the stock built gapps and its working fine
-Disable_Dm-rity_ForceEncrypt_03.04.2020.zip
Thats pretty strange with that ForceEncrypt step, some say they had to others not. I did not flash it to be honest and everythings okay so far. But theres a Chance that you will have to! Maybe it belongs to which ROM you are using (global,eu,chinese) but cant tell for sure...
So this one you will have to figure out yourself, sry.
-4G and LTE is working good for me, so i'd say kali isnt affecting it
-About Widefine, well i dont know to be honest...im watching Prime and Sky Go on the Phone sometimes but for the Quality Prime just says 'optimal' and Sky Go 'HD'...it looks great for sure but i cant tell the exact Quality....if theres a way to check that, let me know and i'll be happy to do that for you
-One more question, what would be a procedure to go back to stock?
I would just do a wipe/format and flash the stock MiUI image or better, your backup via TWRP (or any other custom Recovery)
For me, Fastboot by MiFlashTool is always the last option. If nothing else works, Fastboot is a Livesaver but thats just 'my way' of doing it, there are probably many others who say otherwise!
Sometimes it needs a lot of testing to figure out the best way for your specific device, so always do a backup and flash a custom recovery before flashing Nethunter. That way, its always posible to get back to Stock if you encounter any bootloops/problems after the installation.
Its like always while playing around with any OS...if it wont work, you just have to "Try Harder"
Im happy to help anyway, if you got any more Questions just shout out mate
Click to expand...
Click to collapse
Thank you a lot for your answer.
Btw, few days ago I upgraded to QFJEUXM v11.0.6 (so no more 11.0.5), which is newer than the Kali pre-built image, but according to v11.0.6 Changelog only Security patch was updated
I'm still tempting to try Kali (currently having new official TWRP v3.4.0, Magisk Canary 20416 and Hasty kernel)...
You can check your Widevine Security level (still interested if you have L1) by
https://play.google.com/store/apps/details?id=flar2.devcheck
https://play.google.com/store/apps/details?id=com.androidfung.drminfo
By going back to stock you said flashing MIUI. - so you mean flashing ZIP/Recovery firmware through TWRP?
zgfg said:
Thank you a lot for your answer.
Btw, few days ago I upgraded to QFJEUXM v11.0.6 (so no more 11.0.5), which is newer than the Kali pre-built image, but according to v11.0.6 Changelog only Security patch was updated
I'm still tempting to try Kali (currently having new official TWRP v3.4.0, Magisk Canary 20416 and Hasty kernel)...
You can check your Widevine Security level (still interested if you have L1) by
https://play.google.com/store/apps/details?id=flar2.devcheck
https://play.google.com/store/apps/details?id=com.androidfung.drminfo
By going back to stock you said flashing MIUI. - so you mean flashing ZIP/Recovery firmware through TWRP?
Click to expand...
Click to collapse
No problem, i'm happy to help wherever i can :good:
-Btw, few days ago I upgraded to QFJEUXM v11.0.6...
Yeah, im not surprised bout that...sorry for the late answer :/
Thank you for pointing out these two Apps mate!
I've checked my Widevine Security Level and both Apps showing Widefine L1 (Screenshots attached) so no downgrade after flashing Nethunter
Yes thats correct, to get back to stock you would have to flash the ZIP/Recovery firmware through TWRP.Only if that doesnt work you'd have to do it through Fastboot.
If you did a full backup (i.e. through TWRP) of your system before flashing Nethunter, you would be able to restore it by flashing the recovery,dtbo,boot and system images one by one through TWRP/Fastboot (not sure but i think it should be enough to just reflash the system.img, boot.img and dtbo.img to get your pre-Nethunter Setup/Specs back (English isnt my native Language so in case you dont get what im trying to explain...that means your stock 11.0.6 with TWRP v3.4.0, Magisk Canary 20416 and the Hasty kernel including all your Settings and Stuff)
You wouldnt have to flash a 'naked stock rom' if Nethunter doesnt work
If you're still not comfortable enough to install Nethunter onto your Device, just wait a few more Days.
I will try to get Nethunter running on the 11.0.6 ROM myself as soon as i have some more time!Will also try it with your Specs/Setup by then
Hi, i cant install chroot.
image transparente png
sinanlenfom said:
Hi, i cant install chroot.
image transparente png
Click to expand...
Click to collapse
Obviously you set the wrong Folder Name...just choose one of the three options from Screenshot 1!?
But to be honest, and i really dont want to offend you, if you couldnt figure that one out yourself you shouldnt install Nethunter at all...
@zgfg
Sorry mate, wasnt able to try it so far.....very busy at work atm! Will do the next few Days
HardcodedString said:
@zgfg
Sorry mate, wasnt able to try it so far.....very busy at work atm! Will do the next few Days
Click to expand...
Click to collapse
Thanks
HardcodedString said:
Sorry mate, wasnt able to try it so far.....very busy at work atm! Will do the next few Days
Click to expand...
Click to collapse
Ok, I installed NetHunter zip image for Davinci over QFJEUXM v11.0.6.0 and re-rooted with Magisk Canary v20419.
Ran NetHunter app and chroot.
I think it looks ok - screenshots attached
Btw, tried yesterday Wifite to 'break' three WPA WLANs (Private, not Enterprise) for whom I actually know passwords - their passwords are weak like vesna1970 or 136923457
Wifite was running for two or three hours, trying Pixie-Dust, NULL PIN, PIN Attack, Handshake capture but eventually failed for all three connections
I will set up a WEP AP at home next week to test again, but who nowadays still uses WEP. Almost everybody would be using WPA, and with stronger passwords than above
If so, I doubt it is of big (educational) use and I am suspect about YT movies where they successfully break WPA in 30 minutes (or more)
Receiving a notification to update NetHunter from Installed 2020.2 to 2020.2?!
But the Update fails with Error -110 - on screenshots
Btw, I have successfully updated (couple of times) packages from NetHunter app, currently there is nothing to update there
Edit:
Fixed the NH app update notification: open NetHunter Store, Settings, Expert mode and untick Privilege Extention.
Let it update the NetHunter app
I just can't get it to work. After going through some newbie hiccups, I am able to install TWRP through Odin, but no version of TWRP that I found works. And they all seem to not work in different ways.
Based on the threads here, it obviously worked in the past but either the download links are dead, or the link leads to an archive where the specified version doesn't exist. No knock here, that's normal for old threads anywhere.
So, no TWRP, no root; no root no making the J6 useful. Disappointing, but since the J6 doesn't seem to have ever been supported very well with official versions of anything, I'm not surprised.
Does anyone have any insight or suggestions?
Lol its easy to root using magisk app and ADB without using twrp just follow the instructions from topjohnwu.. also there is twrp 3.6 unofficially made for J6 i have it on hand but i will not share it to protect you from experimenting.. ive been using GSI from 2019 til 2022 and end up realizing its better to stay on stock. Rooted stock is ok but GSI it has bugs..
danicadanicadanica said:
Lol its easy to root using magisk app and ADB without using twrp just follow the instructions from topjohnwu.. also there is twrp 3.6 unofficially made for J6 i have it on hand but i will not share it to protect you from experimenting.. ive been using GSI from 2019 til 2022 and end up realizing its better to stay on stock. Rooted stock is ok but GSI it has bugs..
Click to expand...
Click to collapse
It might be easy for you, but I'd like to make TWRP through Odin work before moving on to something else that I have no experience with.
You have something that might work but won't tell me where to get it because you want to "protect me from experimenting". What do you think I've been doing all this time?
So yeah, lol.
captainjarvis said:
It might be easy for you, but I'd like to make TWRP through Odin work before moving on to something else that I have no experience with.
You have something that might work but won't tell me where to get it because you want to "protect me from experimenting". What do you think I've been doing all this time?
So yeah, lol.
Click to expand...
Click to collapse
Hi Jarvis I use a Samsung J600G as my daily driver with Corvus 17 based on android 11 on TWRP 3.2.3.
Requirements -
Odin installed on your computer.
USB cable
TWRP tar file
To install TWRP -
1. Switch your phone off and hold volume up and down buttons at the same time while connecting your phone to the computer by cable.
2. Open Odin and go to options, switch off auto reboot, now click on AP and select your TWRP tar file.
3. Now after Odin says PASS disconnect the cable from your phone and hold Volume down + power button for 7 seconds and as soon as the screen goes black hold Volume up + power button. This will boot you into your newly installed TWRP.
When it comes to custom roms J6 has some limitations for a few good ones. In my opinion you can install EvolutionX 4.0 (made by @adi_ss) that is based on android 10 as its the easiest rom to install. All you have to do is follow the instructions given by the developer. And there is no need to worry if you mess up somewhere as I have made my fair share of mistakes and still haven't managed to brick my phone.
Thanks for reading guys.