To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Essential Phone can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
They claim that a 5 mins charge gets you 5 hours of battery. 1 hour and 30 minutes for a complete charge.
Sent from my Pixel using XDA-Developers Legacy app
Apperently its like 30 something Watts. Unbox Therapy found this on the charger.
27W to be exact. And on another video review, it showed 5v @ 3A and 9v @ 3A on the charger. So this thing should charge pretty quick and I assume is just using the native USB-C Fast Charge capability which is just fine.
I got confirmation from support that it is using USB-C PD for charging. No QuickCharge.
So this is all false then...
http://www.theandroidsoul.com/essential-phone-fast-charging/
LastQuark said:
So this is all false then...
http://www.theandroidsoul.com/essential-phone-fast-charging/
Click to expand...
Click to collapse
Yup, that would be a lie. Just because you have a 835, they would have to still implement QC themselves in order to leverage it.
And I believe Qualcomm loves to charge a pretty penny to flip that bit on for your device.
The device may still charge pretty quickly, but we will need some reports from those who have it in hand.
Anyone with it already have AccuBattery installed and see what the charging speed is plugged into its charger?
uncled1023 said:
I got confirmation from support that it is using USB-C PD for charging. No QuickCharge.
Click to expand...
Click to collapse
From a review I watched, they said that the charger is capable of Charing 5 hours of usage time in 5 minutes.
I tried my s8 charger on it, the charger quickly heated up and stopped charging the device
When using the S8 charger, it show slow charging... Sucks
Soooo... What's wrong with using the included charger?
And Samsung uses some other form of Fast Charging that's proprietary to their own devices. It isn't Qualcomm quick charge at least at the generic level. Essential just uses the USB-C 3A fast charge ability which you will have to get separate from both Samsung or QC2/3.0 stuff which is a bit of a pain, but really not surprising. Same as the Nexus/Pixel devices.
It shows Charging Slowly with my Anker PowerPort 10 charger for some reason - even though it is 60W capable and nothing else was plugged into it. I'm really hoping I don't actually have to use the bundled charger just to get it to charge quickly. That would actually be really annoying. I rarely use included chargers since I have Anker PowerPorts everywhere that I need to charge.
I plugged in an Ailey quick charge charger. It first said charging slowly then changed to charging rapidly.
Sent from my PH-1 using Tapatalk
ack154 said:
It shows Charging Slowly with my Anker PowerPort 10 charger for some reason - even though it is 60W capable and nothing else was plugged into it. I'm really hoping I don't actually have to use the bundled charger just to get it to charge quickly. That would actually be really annoying. I rarely use included chargers since I have Anker PowerPorts everywhere that I need to charge.
Click to expand...
Click to collapse
That's because it will never fast charge a USB-C Fast Charge device. You need something like this since this device does not have Qualcomm quick charge.
That 60W charger doesn't really support any modern Quick Charge, it just supports the max 2.4A charging for things like Tablets and whatnot.
For those using Quick Charge to the PH-1, it is only compatible with QC 4.0 and not QC 3.0 or below. QC 4.0 is compatible with Power Delivery (PD) that PH-1 uses.
27W USB Charger
Just got mine today... It says 27W...
LazerL0rd said:
Apperently its like 30 something Watts. Unbox Therapy found this on the charger.
Click to expand...
Click to collapse
Franksr said:
Just got mine today... It says 27W...
Click to expand...
Click to collapse
Yeah.. that should be average.
IM0001 said:
That's because it will never fast charge a USB-C Fast Charge device. You need something like this since this device does not have Qualcomm quick charge.
That 60W charger doesn't really support any modern Quick Charge, it just supports the max 2.4A charging for things like Tablets and whatnot.
Click to expand...
Click to collapse
Quick charge or no quick charge, I'm pretty sure it's supposed to charge faster than 3% overnight. It still said charging slowly when I got up this morning and said 5 days until full. It had actually only gone up 3% in the past 9 hours.
My battery is at 96% so it may not be the most accurate test, and it was over 1000mah on initial plug in and then slowly went down to what's on the screen shot after about a minute.
Related
The beast? I got mine but haven't powered it up yet for charging purposes. There is no light indicator that tells you when its done.
Got mine yesterday and I charged via AC and it took about 3 hours to complete. After letting it drain over night after 8 hours of heavy usage, I'm charging via USB and it's taking forever. With it on and after 2 hours, it was only at 15%. Now turned it off and it's been 3 hours and it looks like 75%. BTW, press the power button once and the screen will show the batter gauge.
you should charge it while turned on and for 6 hours or more for 4-5 cycles. Let it go down to 5% for those 4-5 cycles. Do not let it turn off from lack of power.
That is from instructions I received from a third party battery which had these detailed instruction to maximize capacity. I am sure you will get 1000 different ways but that is what I use and have always had good battery life.
iLAofficial said:
The beast? I got mine but haven't powered it up yet for charging purposes. There is no light indicator that tells you when its done.
Click to expand...
Click to collapse
While powered off, you can hit the volume button to get a visual on the batter status.
Sent from my SAMSUNG-SGH-I717 using XDA App
This thing pretty much requires the cable that came with it to charge at full speed. Older MicroUSB cables charge at a much slower rate and are recognized as USB devices when plugged in. It must be because of the higher capacity battery. When you have the right cable plugged in, though, it charges pretty fast.
I'm noticing that even using the wall charger and the USB cable it came with, it's taking about an hour for the Note to charge only 15%. Anyone else noticing this? Is it normal that the first batch of charges takes this long (at that rate it would take 6+ hours to charge from 0-100%)?
My note charges very fast when I use the ac adapter and super slow when I use the us from my computer. About 1.5 hours on the ac and more than 3 hours on my pc's us
Sent from my SAMSUNG-SGH-I717 using XDA App
Its always a good idea to charge using the AC wall adapter. The USB port on a computer usually supplies ~.5A @ 5v to charge the phone, the included Samsung wall charger supplies double that with 1.0A @ 5v. That is the reason you see such a big difference in your charging times.
(Some computers now supply more than .5A through USB, but .5A is most common)
USB3.0 can supply 5.0v @ 950mA to charge, but the kernel isn't set up to take advantage of this, I'll see if I can change that (it would only affect charging while booted)
Just shy of the AC adapter for those of us with USB3 ports
ulkesh said:
I'm noticing that even using the wall charger and the USB cable it came with, it's taking about an hour for the Note to charge only 15%. Anyone else noticing this? Is it normal that the first batch of charges takes this long (at that rate it would take 6+ hours to charge from 0-100%)?
Click to expand...
Click to collapse
same here..
Da_G said:
USB3.0 can supply 5.0v @ 950mA to charge, but the kernel isn't set up to take advantage of this, I'll see if I can change that (it would only affect charging while booted)
Just shy of the AC adapter for those of us with USB3 ports
Click to expand...
Click to collapse
I was excited reading this because my new laptop has a 3.0 port. However, I then remembered that my power brick for my laptop is kick ass and has a USB port that charges devices at 1A anyways. Haha.
Sent from my SGH-I997 using xda premium
So I got it down to 5% and then I plugged it in at around 8pm and at 11pm it was at 100%. Not bad, not great but seems about right. Now my question is I see a notification that battery is fully charged and to unplug charger but Im going to bed soon and am going to leave it plugged over night. Is this risking the battery in any way?
ygong said:
same here..
Click to expand...
Click to collapse
Same here rooted on on demand cpu governor.
Da_G said:
USB3.0 can supply 5.0v @ 950mA to charge, but the kernel isn't set up to take advantage of this, I'll see if I can change that (it would only affect charging while booted)
Just shy of the AC adapter for those of us with USB3 ports
Click to expand...
Click to collapse
That would be the only use for my USB3.0 ports so far. Have yet to even need to utilize it.
The charger that comes with the Note can charge the battery in 3hours via ac. I wouldn't suggest to charge via usb, just because it's way too slow. Im using my playbook charger to charge my Note, Galaxy Nexus , and my bb 9900. This charger is 1.8a, it nearly charges 2x faster than the regular 1a that comes with most phones. Same thing for my car charger 2a, i even use my ipad charger to charge my iphone 4s and it's way faster!! Use more powerful chargers... Not more than 2a or your device might melt down!!
Sent from my iPad 3G
big samm said:
The charger that comes with the Note can charge the battery in 3hours via ac. I wouldn't suggest to charge via usb, just because it's way too slow. Im using my playbook charger to charge my Note, Galaxy Nexus , and my bb 9900. This charger is 1.8a, it nearly charges 2x faster than the regular 1a that comes with most phones. Same thing for my car charger 2a, i even use my ipad charger to charge my iphone 4s and it's way faster!! Use more powerful chargers... Not more than 2a or your device might melt down!!
Sent from my iPad 3G
Click to expand...
Click to collapse
That's weird. I was under the impression that GS Note only accepts 1.0A of power. Well at least that's what it saids at the back of the phone. I've got an iPad charger that draws out 2.1A, maybe I should give that a try.
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
dkool1 said:
Using the app Ampere, my V10 does not take advantage of the fast charge 2.0. I get to charging at or around 700mA, but mostly sub 500mA or less. I've tried using the charger that came with the phone, I purchased an Anker 40W 5-Port charger and recently a Mobiilink 6-Port 60W charger all with the same results. Any ideas as to what may be wrong (if any). My phone has been charging for the last 3hrs and is only at 50% after being plugged in at 9%. Thanks in advance for any help.
Click to expand...
Click to collapse
As far as I can determine, neither of the chargers you mention are Qualcomm Quick charge certified. So you won't be able to get the fastest charge with them. Anker does make chargers that are qualcomm certified, but the one you have isn't. Mobilink has zero devices that are certified.
No matter what words are used by the manufacturer, unless they are qualcomm certified you are more than likely out of luck..
What about the charger that came with the phone? It is certified and will most definiitely give you a fast charge.
The V10 is equiped with qualcomm fast charge 2.0 technology. Fast charge 3.0 is available on a few devices and there are lots of manufacturers advertising chargers that are quallcomm fast charge 3.0 certified. I personally would avoid these as they won't speed up the charge rate of the V10 and are usually sold at a premium price.
Thanks for the reply. The phone DOES quick charge. It seems that when I'm using the phone while charging, it charges slowly (>500mA) . When I set it down, it will charge fast (<1.5A). The charger that came with the phone is Qualcomm fast charge 2.0 as well as the 5-port Mobiilink (only one port).
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the LG G6 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
---------- Post added at 09:45 AM ---------- Previous post was at 09:45 AM ----------
chinchillables said:
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Click to expand...
Click to collapse
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
Went and picked up this bad boy today. LS variant. Out of the box, had 41%. Using my car charger Qualcomm Quick Charge 2.0(yes 2.0) and the included USB C, it charged to 70% in the 20 minute drive back to my house. For using the old QC tech, still charged amazingly fast. I have a QC3.0 39W wall charger that got delivered this afternoon. Will wait til this baby dies and charge her up with that and will report back.
Ive noticed when using a QC 3.0 charger and cable doesnt seem like the g6 is actually charging faster. Its suppose to support QC but its not.
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
I had a power brick laying around and says qualcomm 2.0 and it charge`s really fast, like 1% of battery every min. , but yes with the stock charger brick takes forever to charge.
Using a Xiaomi USB C charger (45W) which supports both UPD 2.0 and QC 3.0, my phone charged very fast.
Mine charges super fast with the supplied charger. I plugged in with 11% yesterday and hit 50% in like 25 minutes.
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
tagacapiz said:
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
Click to expand...
Click to collapse
Use a non-QC charger.
thanks. I'll do that, I have to get extra cables anyway. Although I was wondering if there was a way to hack it phone-wise.
Sent from my LG-H870DS using Tapatalk
sharoon01 said:
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
Click to expand...
Click to collapse
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
abdullahziad said:
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
Click to expand...
Click to collapse
I'm pretty sure the supplies charger is QC3.
vintagerock said:
I'm pretty sure the supplies charger is QC3.
Click to expand...
Click to collapse
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
sharoon01 said:
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
Click to expand...
Click to collapse
Look to the charger specification, if it supports only 5v and 9v then is QC2. QC3 scales on various voltage between 5 and 12 volts.
And yes, the provided charger is QC2, probably the same Found with the G5.
Yeah I take back what I said. The supplied charger does appear to "only" be QC 3. It still seems faster then QC2 though. Maybe it's just in my head. It works for my needs though, I can get almost 50% in like 20.
Charge in airplane mode when you can. When you have no worries of anyone calling or texting. With wifi off as well you'll see a decent jump in fast charging.
purchased by phone a couple of days back and it charged from 5% to 100% in approx 1.40 mins with the stock QC 2.0. I'm damn impressed....
Let me Ask y'all something. Coming from a LG G4 and just Charging My Batteries by a OEM Battery Charger I got 2HRs More of SOT. When I charge via the USB Quick Charger I got the same 3HRs as usual. So I got 5 while charging Slower then the SO-Called Quick Charging. To my understanding Batteries are meant to Slow-Charge rather then Fast
I now have a couple Qualcomm 3.0 fast chargers, the fast charger from my LG G5, and the One plus fast charger. Only the One plus charger indicates that the 6T is quick charging. My question is if the other fast chargers are still faster to charge this phone than a standard charger.
Thanks
marcmarshall said:
I now have a couple Qualcomm 3.0 fast chargers, the fast charger from my LG G5, and the One plus fast charger. Only the One plus charger indicates that the 6T is quick charging. My question is if the other fast chargers are still faster to charge this phone than a standard charger.
Thanks
Click to expand...
Click to collapse
No, you need to use DASH Charger to have fast charging
polzovotel said:
No, you need to use DASH Charger to have fast charging
Click to expand...
Click to collapse
Thanks
This link explains it well: https://m.androidcentral.com/dash-charge
They will charge faster than an old .5 amp you may have kicking around in a drawer. Realistically they will charge fast enough because how often do you need every drop you can get as quickly as possible? On the occasions you do need that you just take it to the dash charger and all is good. It's not just me saying that, there was a thread on a previous OnePlus device where someone else said what I just did and the agreement was unanimous. I couldn't argue it myself, I had found just the same to be true; I was typically in no hurry to charge the device and when I was I just made a point of going to the dash charger. I'm not sure what your use case is but if it was to go all dash all the time you may want to consider waiting a little and seeing how it plays out in use. I think you'll find your ok with just the one that came in the box or getting a second for the office or cart and calling it a day.
Someone not only do you need the charger you need the cable to? That wasn't explained in the article. Can you clarify?
marcmarshall said:
This link explains it well: https://m.androidcentral.com/dash-charge
Click to expand...
Click to collapse
Sent from my ONEPLUS A6013 using Tapatalk
biggiestuff said:
Someone not only do you need the charger you need the cable to? That wasn't explained in the article. Can you clarify?
Click to expand...
Click to collapse
You will need both the official OnePlus cable and wall wort to get the full charging speed.
Are the chargers and cables for the Oneplus 5 and 6 the same as the 6T?
marcmarshall said:
Are the chargers and cables for the Oneplus 5 and 6 the same as the 6T?
Click to expand...
Click to collapse
Yep, they’ve been using the same charger since the 3.
https://forum.xda-developers.com/oneplus-6/accessories/ordinary-usb-cables-support-dash-t3838411
This post describes how the OPPO charger works with some Amazon cables to give the full 4A charge on a OP6. I've ordered the cables linked in the first post and an OPPO VOOC charger to try out, and keep for a spare / work setup for my 6T once it gets here today.
Where does it say if it's Dash Charging on the phone? With my Note 9 I can see if it's quick charging or not, depending on charger.
roaduardo said:
Where does it say if it's Dash Charging on the phone? With my Note 9 I can see if it's quick charging or not, depending on charger.
Click to expand...
Click to collapse
You're probably not going to see the term "Dash Charge" anywhere,since OnePlus stopped using the phrase.
Whether they replaced it w/something else to indicate fast charging is anyone's guess (if there was any indication of Dash (fast) charging on previous OnePlus devices).
KOLIOSIS said:
You're probably not going to see the term "Dash Charge" anywhere,since OnePlus stopped using the phrase.
Whether they replaced it w/something else to indicate fast charging is anyone's guess (if there was any indication of Dash (fast) charging on previous OnePlus devices).
Click to expand...
Click to collapse
Oh, true. I forgot about the EU legal stuff.
KOLIOSIS said:
You're probably not going to see the term "Dash Charge" anywhere,since OnePlus stopped using the phrase.
Whether they replaced it w/something else to indicate fast charging is anyone's guess (if there was any indication of Dash (fast) charging on previous OnePlus devices).
Click to expand...
Click to collapse
You will see a lightning bolt in place for the battery icon when Dash Charging is active, and if you plug in the Dash charger while on the lock screen, it will also make a short blip noise with an animated lightning bolt. Standard chargers and/or cables will show the lightning bolt inside the battery icon. You can always look at the charger current using the *#808# menu though.
Wait does the cable really matters? from the article linked, looks like the tech is only in the adapter
It matters because if you don't use one designed for it you wont get Dash charging, and yeah, its irritating that we have drawers full of cables that we cant use. As to the question of how you can tell, it says "Rapidly charging" on the lock screen. You'll also notice the phone gets charged stupidly fast, that's a big tell.
Gungrave223 said:
Wait does the cable really matters? from the article linked, looks like the tech is only in the adapter
Click to expand...
Click to collapse
Yes it does. Pushing 4 amps to get more watts requires low resistance cables, otherwise the resistance will limit maximum wattage. With QuickCharge (instead of DASH charge) voltage is raised instead of current, mitigating the resistance problem.
For QuickCharge there also a handshake telling both the phone and charger that both devices support a certain charging standard. Only then current (or voltage) is raised above normal USB levels. Otherwise you would risk destroying devices which are not capable of fast charging.
Bäcker said:
Yes it does. Pushing 4 amps to get more watts requires low resistance cables, otherwise the resistance will limit maximum wattage. With QuickCharge (instead of DASH charge) voltage is raised instead of current, mitigating the resistance problem.
For QuickCharge there also a handshake telling both the phone and charger that both devices support a certain charging standard. Only then current (or voltage) is raised above normal USB levels. Otherwise you would risk destroying devices which are not capable of fast charging.
Click to expand...
Click to collapse
Tragic...I invested a lot into my PD chargers for my 2xl guess I need to update everything again
But do you? How often do you NEED dash charge? You can still use all the other charges, they just won't charge as fast, but that's not a bad thing if you are not in a hurry.
The Dash charger works the fastest, however my Quick Charge 3.0 car and wall chargers are still delivering 2 to 3 times more m to my OneTouch 6T then my Galaxy 8 (Rated for Quick Charge 2.0) ever took, that is using higher end usb-c cables but not the Dash cables.
The Highest I ever saw my s8 take was 1300 mA, this 6T will take 2300 mA from my QC 3.0 car charger and 3200 mA from my QC 3.0 wall charger, as long as the battery is under 70%. However, the Dash charger with Dash cable gets around 4800 mA but it seems to fill the battery at a more rapid pace then what I would expect for that amount of power going into it.
The Dash cables have more pins in them to deliver segmented power, at the proper voltage and amperage, to partitioned batteries simultaneously in the 6T without it causing your phone to heat up.
I don't yet have a 45 watt charger, so I connected the 25 watt charger from my S20. It says it will take 2 hrs to charge from 15% to Full.
My S20 would charge a lot faster than that. Is this normal?
I guess.
pixel 18W charger is 2h20.
iphone 5w is 5h15
LG 10w near 3h
I might get a faster one, I have the 20W oneplus one, but it wont work on the samsung... dash charging tech not compatible
DUTCH Van Atlanta said:
I don't yet have a 45 watt charger, so I connected the 25 watt charger from my S20. It says it will take 2 hrs to charge from 15% to Full.
My S20 would charge a lot faster than that. Is this normal?
Click to expand...
Click to collapse
Not sure if the S20 charger uses PPS charging protocol that S23U "requires" but 2 hours for 85% sound fine if it's not charging at 25 watts.
JohnTheFarm3r said:
Not sure if the S20 charger uses PPS charging protocol that S23U "requires" but 2 hours for 85% sound fine if it's not charging at 25 watts.
Click to expand...
Click to collapse
Thanks. My S20 with that charger would charge 85% a whole lot faster than 2 hrs.
45 watt charger should arrive tomorrow. Hopefully, it will go faster.
DUTCH Van Atlanta said:
Thanks. My S20 with that charger would charge 85% a whole lot faster than 2 hrs.
45 watt charger should arrive tomorrow. Hopefully, it will go faster.
Click to expand...
Click to collapse
Yes, but as I mentioned, S23U requires PPS protocol to charge at the "advertised" speed. Just because the charger is 25W, it doesn't mean it will charge at 25W if it's missing the required protocol. Hence why I wrote I'm not sure if S20 supports the same PPS as S23U uses. In order to get 45W charging speed on S23U the charger needs to be PPS and the cable needs to be rated at least at 5 Amps.
JohnTheFarm3r said:
Yes, but as I mentioned, S23U requires PPS protocol to charge at the "advertised" speed. Just because the charger is 25W, it doesn't mean it will charge at 25W if it's missing the required protocol. Hence why I wrote I'm not sure if S20 supports the same PPS as S23U uses. In order to get 45W charging speed on S23U the charger needs to be PPS and the cable needs to be rated at least at 5 Amps.
Click to expand...
Click to collapse
That's what should be coming tomorrow from Amazon: Anker 313 charger and 543 cable.
Why Samsung doesn't include these with the S23 is a shame!
DUTCH Van Atlanta said:
That's what should be coming tomorrow from Amazon: Anker 313 charger and 543 cable.
Why Samsung doesn't include these with the S23 is a shame!
Click to expand...
Click to collapse
Well, some OEMs don't include a charger with their Flagships nowadays. Samsung isn't the only one.
That seems a little slow.
Make sure fast charging is on in settings. As you plug your charger in, it should say that it's Super Fast Charging
If it doesn't, try a different cable
If that doesn't work, go for a different charger
My phone keeps saying moisture detected, when there isn't, it's fked up, some chargers work, most dont
when you want to start charging your phone,make sure phone battery temperature is normal.
if you use continuously then charge it,charging speed is lower.
don't depend on status SFC or SFC 2.0.
you need watt meter cable or watt meter to know actually the real time charging speed.
if very hot,from 45 watt down to 15 watt charging (SFC 2.0)
if you want to charge from 10 to 100 in 1 hours use 45 watt charger,you need a cooler room temperature.
or you need a cooler at the back of the phone in 33 degree celcius room temperature.
if you wat to charge wireless 15 watt,it is the same.
battery temperature can make it slower charging.
status fast wireless charging is not the benchmark for charging speed.
SFC 2.0 is the same ,not the benchmark for charging speed.
you need a watt meter cable to know the real charging situation.
My S20 charger initially shows SFC as active when I plug it in but then it drops down to normal charging. Looks like I am not the only one with this issue so guess I will be buying a new brick.
Anyone got a good suggestion on which ones to get? In addition any good 12v car chargers that support it too?
noisy_lightning said:
My S20 charger initially shows SFC as active when I plug it in but then it drops down to normal charging. Looks like I am not the only one with this issue so guess I will be buying a new brick.
Anyone got a good suggestion on which ones to get? In addition any good 12v car chargers that support it too?
Click to expand...
Click to collapse
The Anker 313 charger and the Anker 543 cable work for me.
I've had old HTC and Motorola phones from years gone by that took ages to charge. When I got the opportunity and the cash to buy my Samsung, I made sure I got a charger and cable that could super fast charge. From less than 10% to 85% capacity in just a few minutes. Wow.