help!! S6 edge bricked or i dont know what happened. - Galaxy S6 Edge Q&A, Help & Troubleshooting

i dont know what happened to my s6 edge , i tried to flash the firmware going to the download mode but it wont let me press the volume up button to go to the downlowding screen.
if i charge it it only shows the battery signal.but wont charge, and i can see a bar at the buttom of the scree and i dont know what it is.
Does anyone know how to deal with this?

Lucifer9345 said:
i dont know what happened to my s6 edge , i tried to flash the firmware going to the download mode but it wont let me press the volume up button to go to the downlowding screen.
if i charge it it only shows the battery signal.but wont charge, and i can see a bar at the buttom of the scree and i dont know what it is.
Does anyone know how to deal with this?
Click to expand...
Click to collapse
You need to be able to get to download mode to be able to do anything.
Vol down and power and home then press up. Maybe the button is stuck so press it hard.

callumbr1 said:
You need to be able to get to download mode to be able to do anything.
Vol down and power and home then press up. Maybe the button is stuck so press it hard.
Click to expand...
Click to collapse
No the button works fine but as soon as it goes to the screen where it asks press volume key to go to the download mode, the button becomes irressponsive however odin detects the phone,

Lucifer9345 said:
No the button works fine but as soon as it goes to the screen where it asks press volume key to go to the download mode, the button becomes irressponsive however odin detects the phone,
Click to expand...
Click to collapse
Instead of clicking the volume up button in that screen, try clicking the home button. First time you click it, it shows you the SKU, IMEI etc, click the home button again to go into to ODIN mode.

I did as you said, odin detects after pressing the home button, i dowloaded the official firmware and install it using odin. odin says pass but nothing happens to my phone, it stucks in s6 edge screen and i cam still see the bar.

maybe you need to unplug your phone before going into d.loadmode. If nothing happens try to push the 3 buttons for a longer time, finely your phone will shutdown or reboting into downloadmode

Lucifer9345 said:
I did as you said, odin detects after pressing the home button, i dowloaded the official firmware and install it using odin. odin says pass but nothing happens to my phone, it stucks in s6 edge screen and i cam still see the bar.
Click to expand...
Click to collapse
Try going into recovery mode now and see if it works. I had a similar problem where the flash passes but was still stuck in a bootloop, I couldn't even go into recovery mode, I visited a Best Buy store with a samsung experience shop and they flashed the stock firmware using SMART but it was still stuck in a bootloop. So, I sent my phone to the samsung repair center, I think it's a motherboard problem.

Maybe your flashed the wrong kernel?
If the kernel is incorrect then your phone will be as well.
Sent from my SM-G925F using XDA Labs

Lucifer9345 said:
I did as you said, odin detects after pressing the home button, i dowloaded the official firmware and install it using odin. odin says pass but nothing happens to my phone, it stucks in s6 edge screen and i cam still see the bar.
Click to expand...
Click to collapse
Have you fixed this?

callumbr1 said:
Have you fixed this?
Click to expand...
Click to collapse
No i tried it but it did not help. Anyways thanks for your help.

Related

[Q] Black Screen

i need help please
while my wife is charging her i8552, and when she press the power buttn, screen isn't showing anything. its just a black screen -
led lights still turning on when i press the power button as well as the home button and volume button.
i tried to restart and i heard the boot animation sound but no picture just a PLAIN BLACK SCREEN -
what to do? please help - please ----
If it happens all time, I would sugest reflashing original rom on the device
freitaz said:
If it happens all time, I would sugest reflashing original rom on the device
Click to expand...
Click to collapse
the question is how? i cant even see anything just plain black on my screen..
JastaPein said:
the question is how? i cant even see anything just plain black on my screen..
Click to expand...
Click to collapse
You can the following procedure, as described in many threads around here. You just need to do the following steps:
1: download stock firmware (you can find it at http://sammobile.com)
2: download Odin (i recommend v3.07, you can find with a search)
3: install usb drivers for your device
4: put your device in download mode (remove your battery and put back on the phone; after this power it up with power button + home button + volume DOWN; when your device vibrate, release the power button but keep the another 2 pressed)
5: confirm the warning on screen with volume UP
6: open Odin, click in PDA and select the downloaded firmware (you may need to unpack it first, because Odin expects a .tar or a .tar.md5 file)
7: plug your device in your computer; Odin must recognize your phone (a blue field will appear on screen)
8: uncheck only the auto-reboot and leave the another boxes as it is
9: click on start button and wait... it will take around 15 minutes
10: when "reset" appears on the screen, disconnect your device, remove the battery and put it again; after this, power up your phone normally and wait the boot. It should work as expected now.
freitaz said:
You can the following procedure, as described in many threads around here. You just need to do the following steps:
1: download stock firmware (you can find it at http://sammobile.com)
2: download Odin (i recommend v3.07, you can find with a search)
3: install usb drivers for your device
4: put your device in download mode (remove your battery and put back on the phone; after this power it up with power button + home button + volume DOWN; when your device vibrate, release the power button but keep the another 2 pressed)
5: confirm the warning on screen with volume UP
6: open Odin, click in PDA and select the downloaded firmware (you may need to unpack it first, because Odin expects a .tar or a .tar.md5 file)
7: plug your device in your computer; Odin must recognize your phone (a blue field will appear on screen)
8: uncheck only the auto-reboot and leave the another boxes as it is
9: click on start button and wait... it will take around 15 minutes
10: when "reset" appears on the screen, disconnect your device, remove the battery and put it again; after this, power up your phone normally and wait the boot. It should work as expected now.
Click to expand...
Click to collapse
screen stays black after doing this.. will the problem possibly be on the SCREEN itself? it also heats up alot everytime i turn it on..
i called the number and its ringing i even managed to answer it by swiping the screen even if i cant see a thing.
any thoughts?
JastaPein said:
screen stays black after doing this.. will the problem possibly be on the SCREEN itself? it also heats up alot everytime i turn it on..
i called the number and its ringing i even managed to answer it by swiping the screen even if i cant see a thing.
any thoughts?
Click to expand...
Click to collapse
Umm, I would rather take it to the service centre.
If you're not sure what's wrong and if you don't mess around with your phone, that's the only way you got.
JastaPein said:
screen stays black after doing this.. will the problem possibly be on the SCREEN itself? it also heats up alot everytime i turn it on..
i called the number and its ringing i even managed to answer it by swiping the screen even if i cant see a thing.
any thoughts?
Click to expand...
Click to collapse
You screen was black even in download mode?
If not, you could try to flash CWM and do a factory reset in your device, and reflash the rom. But I think it's better to take your device to an authorized service center.
Sent from my GT-I8552B using xda app-developers app
freitaz said:
You screen was black even in download mode?
If not, you could try to flash CWM and do a factory reset in your device, and reflash the rom. But I think it's better to take your device to an authorized service center.
Sent from my GT-I8552B using xda app-developers app
Click to expand...
Click to collapse
i managed to flash stock rom via odin (without seeing anything) and problem still occurs.. my wife brought it to service center and was told that the problem seems to be on the screen itself *hope its not* we'll call them after 3 days to know the real problem..
i hope its just a wiring problem, because if the problem is the screen, that means a lot of money ~
thanks to all!
freitaz said:
You screen was black even in download mode?
If not, you could try to flash CWM and do a factory reset in your device, and reflash the rom. But I think it's better to take your device to an authorized service center.
Sent from my GT-I8552B using xda app-developers app
Click to expand...
Click to collapse
i have same problem, but after flashing phone everything is fine except download mode.
when i go to download mode phone is booting in it but black screen is there, otherwise recovery mode and os booting without problem.
JastaPein said:
the question is how? i cant even see anything just plain black on my screen..
Click to expand...
Click to collapse
Reboot in download mode and flash rom via Odin

Strange Problem With S3

Hey guys i am facing strange prblem with my s3 i have instaled Naatrom but today mobile rebooting automaticly .... i cant go in recovery mode... but i can go in download mode but after 3 sec mobile reboot again when i press Voulme Up. help plz
Take the battery out, wait 30 second then replace it. If the phone turns on by itself then the power button is broken.
boomboomer said:
Take the battery out, wait 30 second then replace it. If the phone turns on by itself then the power button is broken.
Click to expand...
Click to collapse
if i change power button... it will solve my problem?
It depends if it is the power button, I've told you how to test it.
boomboomer said:
It depends if it is the power button, I've told you how to test it.
Click to expand...
Click to collapse
All OK...Aafter i opend my mobile buttons OK.. i can go in recovery and download mode but problem is same boot again and again.. Samsung galaxy s3 and boot again and again.
Go to download mode and flash latest stock firmware with Odin, then factory reset in recovery before boot.

Root or no root?

It's still very early an I see a few people going stir crazy over finding a way to root their phones. I for one am not sure I want to root just yet, the reason being Samsung pay. If it's going to be as awesome as they say it will be I don't wanna miss out due to tripping Knox.
Now I do love flashing and all things root related but I'm willing to hold out.
What about you? Root or no root? Why?
I root right away even if I don't have a "good" reason too. Its the because I can. I don't really care about the tripping knox thing I guess because if you have insurance there is always a chance the device could get "broken". Then you don't have to worry about if its tripped or not. Thats the position Samsung has put me in I wouldn't typically do something like that. So ya now I'm just waiting for TWRP then I will try and make a ROM.
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
I don't care about warranty just samsung pay. I heard it was harder to make roms with exinos is that true?
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
That sucks bro. I feel your pain. What happens if you press volume down, power and home for like 30 seconds?
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Not sure what device you have but there was a video that said not to use the edge version of the root, and to use the regular S6 version. Running the S6 version will fix your broken device. Take this with a grain of salt, I'm just telling you what I saw. I will post the video link if I get a chance.
PS not sure if this actually helps you or not..
Rooting broke Google Play Movies on my phone, battery life was miserable and phone never went to sleep. After I unrooted everything went back to normal. So I am not going to root and just wait until things are cleaned up.
Every phone I've ever had has been rooted as soon as I got it. Not this time though, because of Samsung Pay.
If rooting breaks Samsung Pay, I'll never root the phone
IakobosJ said:
Every phone I've ever had has been rooted as soon as I got it. Not this time though, because of Samsung Pay.
If rooting breaks Samsung Pay, I'll never root the phone
Click to expand...
Click to collapse
You and me both!
mrnovanova said:
That sucks bro. I feel your pain. What happens if you press volume down, power and home for like 30 seconds?
Click to expand...
Click to collapse
Volume down and power for 7 seconds = battery pull
alexkaye said:
Volume down and power for 7 seconds = battery pull
Click to expand...
Click to collapse
not for me right now: i have the turquoise error screen telling me to use smart switch. volDown + power for 7 seconds turns the screen off... and then right back on a couple seconds later. and i can't seem to slip in the recovery key sequence during that gap.
volDown + power + home is a diff story: that brings me into download mode. but i don't have anything that works in odin right now without failing. very possible that i don't have the correct rom, or that the rom is fine but i just need to go into recovery mode to complete, but i can't seem to do that!
jasonastley said:
not for me right now: i have the turquoise error screen telling me to use smart switch. volDown + power for 7 seconds turns the screen off... and then right back on a couple seconds later. and i can't seem to slip in the recovery key sequence during that gap.
volDown + power + home is a diff story: that brings me into download mode. but i don't have anything that works in odin right now without failing. very possible that i don't have the correct rom, or that the rom is fine but i just need to go into recovery mode to complete, but i can't seem to do that!
Click to expand...
Click to collapse
How about volume up+power+home to stock recovery to perform a factory reset?
No root for me I'm afraid! If I root this device I lose my nfc payment app (Semble) as it checks for root and locks the app if it's detected. Besides I've rooted every other phone I've had since iPhone Gen 1 and I don't really have the time anymore now I've got a 1 year old boy!
Sent from the Edge.
mrnovanova said:
How about volume up+power+home to stock recovery to perform a factory reset?
Click to expand...
Click to collapse
nope. that's what i meant by "the recovery key combination" that i mentioned. only the dload mode key combo works, volUP + power + home does nothing.
jasonastley said:
nope. that's what i meant by "the recovery key combination" that i mentioned. only the dload mode key combo works, volUP + power + home does nothing.
Click to expand...
Click to collapse
Oh shoot. Sorry to hear that.
jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Why is ODIN failing? Drivers installed? Where did you get this recovery? If ODIN can see your device you flash back to unrooted stock firmware.
Also, someone mentioned that you can Vol down + power will shut the device down. As soon as the screen goes black take your finger off the power button, press and hold Vol up + home then press power. You can go right from download mode to recovery with just the buttons.
great questions:
jamcar said:
Why is ODIN failing? Drivers installed? Where did you get this recovery? If ODIN can see your device you flash back to unrooted stock firmware.
Click to expand...
Click to collapse
1. i got them from mobile.com/firmwares/database/SM-G925F/
I would love to hear if this is a good source. also, I don't know if it matters exactly which of those firmwares to choose (there are many, you choose country and carrier)-- i don't know which one came with this phone as it was sent as a demo to me and i didn't take a screen shot of the info screen (does it matter?)
Also, someone mentioned that you can Vol down + power will shut the device down. As soon as the screen goes black take your finger off the power button, press and hold Vol up + home then press power. You can go right from download mode to recovery with just the buttons.
Click to expand...
Click to collapse
2. that doesn't work for me, tried 15 times. I'm stuck with this turquoise error screen telling me to use emergency recovery in smart switch. i can easily get over to dload mode too. From either place, volDown + power gets the black screen and then immediately goes right back to the turquoise error screen, ignores anything else i seem to press, can't get into recovery.
No root for me either. It's hard lol. I miss it mostly for the adblocker. But I'm too worried that rooting with make it so I wouldn't be able to use Samsung pay when it comes out! If a root method is released that won't trip the KNOX sensor then heck ya, I'll root right away!
jasonastley said:
great questions:
1. i got them from mobile.com/firmwares/database/SM-G925F/
I would love to hear if this is a good source. also, I don't know if it matters exactly which of those firmwares to choose (there are many, you choose country and carrier)-- i don't know which one came with this phone as it was sent as a demo to me and i didn't take a screen shot of the info screen (does it matter?)
2. that doesn't work for me, tried 15 times. I'm stuck with this turquoise error screen telling me to use emergency recovery in smart switch. i can easily get over to dload mode too. From either place, volDown + power gets the black screen and then immediately goes right back to the turquoise error screen, ignores anything else i seem to press, can't get into recovery.
Click to expand...
Click to collapse
Did you ever fix this? I'm having the same issue, but because I flashed TWRP...
I need to use Smart Switch, but that says my device is unsupported... SM-G925F
EDIT: Re-flashed root, and all good again!
Tripledrop said:
Did you ever fix this? I'm having the same issue, but because I flashed TWRP...
I need to use Smart Switch, but that says my device is unsupported... SM-G925F
EDIT: Re-flashed root, and all good again!
Click to expand...
Click to collapse
yep, i think that was a key step for me too: re-flashed the root thing, after trying to re-flash stock a bunch of times.

[HELP] stock Galaxy S3 Neo (I9301) stuck in a bootloop

Hi there,
a friend of mine gave me her completely original and stock Galaxy S 3 Neo that got stuck in a bootloop while she was using it.
If you power up the phone, it shows the Samsung Galaxy logo, then proceeds to load the animated logo with the music, but as soon as the first second of music is played, the phone bootloops.
If I try to boot in recovery mode (Home+Power+Volume UP), it bootloops.
If I try to enter Odin mode (Home+Power+Volume DOWN), it bootloops.
Could anyone please explain to me the steps I have to do in order to recover this phone? It is absolutely ESSENTIAL not to delete the internal storage data, because she keeps there many photos of his son (with no backup... how clever)...
Thanks a lot!
Do you see the download or recovery screen before it bootloops?
audit13 said:
Do you see the download or recovery screen before it bootloops?
Click to expand...
Click to collapse
Yes. It reboots after just a few seconds I see recovery or dowload mode, bu it actually loads them before rebooting. The phone is even recognized by Odin just before it reboots.
Are you sure the battery is okay and fully charged? It's possible that the power button is stuck.
audit13 said:
Are you sure the battery is okay and fully charged? It's possible that the power button is stuck.
Click to expand...
Click to collapse
I don't know if the battery is ok... I tried to remove the battery plug the phone but it won't start without. I don't have another battery to try...
It may be the power button whereby the button is stuck in the "pressed" position.
audit13 said:
It may be the power button whereby the button is stuck in the "pressed" position.
Click to expand...
Click to collapse
The power button clicks ok so it doesn't look like it is stuck... I'll look more into it
Edit: WTF I can access download mode just by pressing Home and Volume down, so it seems the power button IS stuck even if it clicks normally...
Although it clicks, it may be stuck in the pressed position.
If you have a multimeter, you could test the power button contacts.
I found this video: https://m.youtube.com/watch?v=rOCa-hQQ2Ko
Damn, it really was stuck! I hit the side of the phone a bunch of time with a pen and the button got un-stuck! Thanks for the help!
davidrf said:
Damn, it really was stuck! I hit the side of the phone a bunch of time with a pen and the button got un-stuck! Thanks for the help!
Click to expand...
Click to collapse
So it works now?
The Nexus 5 is famous for its failing power button.
audit13 said:
So it works now?
The Nexus 5 is famous for its failing power button.
Click to expand...
Click to collapse
Yeah it works perfectly. It just had the need to be hit a couple of times :laugh:

Tab s6 stuck on "Samsung galaxy tab s6" logo

Hi
yesterday my tab s6 screen got unresponsible without anything else happened..
Then i found out that if i used the pen - the n i could turn it off from drop down menu.
I did that but then when i tried to turn it on it got stuck on that bootloop!
I can not access recovery mode - only download mode.
When i put it on charge it starts booting without showing battery percent and boots over and over until battery is drained.
In download mode i tried to flash Bootloader and firmware - but no luck ( odin proceduce succeded but the tab is still in the same bootloop )..
Still can't reach recovery menu..
Any ideas?
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
bartleby999 said:
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
Click to expand...
Click to collapse
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
egidsatr said:
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
Click to expand...
Click to collapse
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
bartleby999 said:
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
Click to expand...
Click to collapse
I opened NBA 2K Mobile and then i went away for like 20mins..
Then i opened the tab and screen was not reacting - only with pen.
I think the USB debugging is not enabled - is there any ways how to enable it without rooting?
Just tried to install a firmware through download mode - Odin shows "passed" and my tab is still in the same sh** ..:/
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
JayR0503 said:
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
Click to expand...
Click to collapse
What country are you located in?
iBowToAndroid said:
What country are you located in?
Click to expand...
Click to collapse
UAE..
"setup connection failed" is a USB error. Try a different cable, or a different port on the computer, or a totally different computer

Categories

Resources