Read Carefully Before Doing Anything !
About :
The TWRP Recovery is for all variants of Moto E4 Plus as all of them have similar chipset Mediatek (MT6737)
Moto E4 Plus XT1770 (MTK Variant & Sold in India)
Moto E4 Plus XT1772 (MTK Variant & Sold in Another Country)
Moto E4 Plus XT1773 (MTK Variant & Sold in Another Country)
Requirement :
- TWRP Recovery TWRP_AV_3.1.1_MTKr1.zip
- Minimal adb & fastboot
- Installed adb & fastboot drivers
- Moto E4 Plus mediatek variant
- Mediatek variant version SKU XT1770, XT1772, XT1773
- USB cable
- Unlocked bootloader
- Backup of whole firmware through Miracle Tool
https://forum.hovatek.com/thread-13347.html
How To Enter Fastboot Mode :
- Press power and volume down button along
- When you see START in device screen leave both buttons
- locate to META MODE window only using vol. down button
- It is next to START window
- When you apply commands in fastboot mode
you will see fastboot command execution in this window
- Leave your device in this state
How To Install :
- Unpack the zip file first
- Drop TWRP_XT1770_XT1772_XT1773i_3.1.1_MTKr1.img in this folder
- C:\Program Files\Minimal ADB and Fastboot\TWRP_XT1770_XT1772_XT1773i_3.1.1_MTKr1.img
- Close this windows now !
- Open Minimal ADB & Fastboot command window
- Type These Fastboot Commands :
- fastboot devices
- fastboot flash recovery TWRP_XT1770_XT1772_XT1773i_3.1.1_MTKr1.img
---- OR ----
You can change the filename to twrp
- fastboot flash recovery twrp.img- TWRP Recovery installed now !
How To Boot into TWRP :
- Press power button and volume down button along
- When you see START in device screen leave both buttons
- locate to recovery window using vol. keys
- Press power button once
- Now your device boot in TWRP mode
- Done for now !
How To Disable Verity in Order To Boot into System :
Download link :
http://www.mediafire.com/file/m0w6zu83am6z38i/no-verity-opt-encrypt.zip
- Place no-dmverity zip file in external SD_CARD
- Press power button and volume down button along
- When you see START in device screen leave both buttons
- locate to recovery window using vol. keys
- Press power button once
- Disable Read-Only Option in TWRP Recovery (i.e, Make system RW read-writable)
- There select allow modifications, swipe, wipe data & cache
- Again boot into TWRP
- Install no-dmverity
- Reboot to system
- Done !
Download TWRP Recovery :
http://www.mediafire.com/file/hn0tcf1ll0jtrg6/TWRP_AV_3.1.1_MTKr1.zip
Download Stock Recovery :
https://drive.google.com/file/d/0B8MhH1I4i6xrY3ZwbjF3N2pIblU/view?usp=drivesdk
Root Moto E4 Plus :
https://forum.xda-developers.com/mo...g-mediatek-t3668753/post73684925#post73684925
Credits :
@squid2
for original twrp recovery
and ported by me, from qualcomm variant to mtk variant
Original Thread Link :
https://forum.xda-developers.com/moto-e4/development/twrp-twrp-moto-g4-qualcomm-t3655160
@Sai praveen for stock recovery
twrp recovery install but supersu flash failure.....WHERE IS THE PROBLEM
---------- Post added at 03:49 AM ---------- Previous post was at 03:46 AM ----------
how to root....
rana.likhi1 said:
twrp recovery install but supersu flash failure.....WHERE IS THE PROBLEM
---------- Post added at 03:49 AM ---------- Previous post was at 03:46 AM ----------
how to root....
Click to expand...
Click to collapse
Moto E4 Plus Rooting Guide :
https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-plus-guide-to-rooting-mediatek-t3668753
kartik verma said:
Moto E4 Plus Rooting Guide :
https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-plus-guide-to-rooting-mediatek-t3668753[/QUOTE
Thanks OP
finally because of you I was able to install twrp on.mu Moto e4 plus finally
I installed through ADB command
I used the command fastboot boot twrp.img and it booted in to twrp.
Thanks again
Keep up the good work.
---------- Post added at 05:49 PM ---------- Previous post was at 05:46 PM ----------
rana.likhi1 said:
twrp recovery install but supersu flash failure.....WHERE IS THE PROBLEM
---------- Post added at 03:49 AM ---------- Previous post was at 03:46 AM ----------
how to root....
Click to expand...
Click to collapse
Even same problem occurred to me
I tried different versions of SuperSU for rooting
Click to expand...
Click to collapse
Nikhil baadshah said:
kartik verma said:
Moto E4 Plus Rooting Guide :
https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-plus-guide-to-rooting-mediatek-t3668753[/QUOTE
Thanks OP
finally because of you I was able to install twrp on.mu Moto e4 plus finally
I installed through ADB command
I used the command fastboot boot twrp.img and it booted in to twrp.
Thanks again
Keep up the good work.
---------- Post added at 05:49 PM ---------- Previous post was at 05:46 PM ----------
Even same problem occurred to me
I tried different versions of SuperSU for rooting
Click to expand...
Click to collapse
SuperSu, magisk, init.d won't work with any mediatek variant of moto e4 and moto e4 plus. we need to edit file_context.bin and unpacking a .bin format file is a bit tedious task.
when it comes to a plain text file
Click to expand...
Click to collapse
can any one please can upload a twrp image backup of xt1773, i hard reset my phone and need that or a rom (((((
Which bin files do you need to compile TWRP for the QCom variant? Happy to send and help test.
how to unlock bootloader? tried fastboot oem unlock_get_data with oem unlock checked and usb debugging checked in developer mode....pplz help
w0rdie said:
Which bin files do you need to compile TWRP for the QCom variant? Happy to send and help test.
Click to expand...
Click to collapse
do you have xt1773? if yes just need a back up of all system for the phone to start if u can please just enter twrp and make a backup with or with out data/root and i 'll try to restore the image of the system for the phone to start ( i dont know how to manage bins just to put a backup zip in my sd card then try to restore :crying thanks
Media fire shows error upon opening the links. Have the files been removed from there?
Mediafire Link are not working, please provide Alternate Link
raghuM said:
Media fire shows error upon opening the links. Have the files been removed from there?
Click to expand...
Click to collapse
ScreenShot please !
Francesco Franz said:
ScreenShot please !
Click to expand...
Click to collapse
This is what I get for every file on mediafire
raghuM said:
This is what I get for every file on mediafire
Click to expand...
Click to collapse
*bingo*
empty drive
Francesco Franz said:
*bingo*
empty drive
Click to expand...
Click to collapse
Yeah I pretty much got that when I saw the error
raghuM said:
This is what I get for every file on mediafire
Click to expand...
Click to collapse
i have one. but i can't upload it right now.
---------- Post added at 05:45 AM ---------- Previous post was at 05:41 AM ----------
raghuM said:
Yeah I pretty much got that when I saw the error
Click to expand...
Click to collapse
Francesco Franz said:
i have one. but i can't upload it right now.
Click to expand...
Click to collapse
Can you pls mirror them when you find time?
raghuM said:
Can you pls mirror them when you find time?
Click to expand...
Click to collapse
sure
@raghuM @ghpk
twrp recovery link. https://www.mediafire.com/download/e7h9lkf3au62t27
no-verity-force-encrypt link. https://www.mediafire.com/download/ww6jaitl5pdimar
You can always appreciate my work by pressing the Thanks Button :good: GO AHEAD
Francesco Franz said:
@raghuM @ghpk
twrp recovery link. https://www.mediafire.com/download/e7h9lkf3au62t27
no-verity-force-encrypt link. https://www.mediafire.com/download/ww6jaitl5pdimar
You can always appreciate my work by pressing the Thanks Button :good: GO AHEAD
Click to expand...
Click to collapse
Thank you. Just bought my daughter this device.
Sent from my LG-LS997 using Tapatalk
Related
hi all,
many of you are looking for intex aqua speed 4.4.2 custom recovery.
here is philz recovery for the device
click on the link to download.
to install this recovery
turn off your phone. remove battery and keep it aside
1.) open sp flash tool
2.) choose scatter file for your device
3.) uncheck all the options in the list except recovery as shown in the screen shot
4.) press download button.
5.) now connect your phone whith out battery.
now sp flash tool will detect your phone and install the recovery.
after installation is complete it will give a green circle with ok in middle.
note:- ensure all the preloader drivers for your device are installed correctly on your pc
now reinsert the battery and start your phone.
you can also root your device easily with this recovery.
thanx and enjoy.
Lollipop recovery?
---------- Post added at 05:02 AM ---------- Previous post was at 04:58 AM ----------
kawal771 said:
hi all,
many of you are looking for intex aqua speed 4.4.2 custom recovery.
here is philz recovery for the device
click on the link to download.
to install this recovery
turn off your phone. remove battery and keep it aside
1.) open sp flash tool
2.) choose scatter file for your device
3.) uncheck all the options in the list except recovery as shown in the screen shot
4.) press download button.
5.) now connect your phone whith out battery.
now sp flash tool will detect your phone and install the recovery.
after installation is complete it will give a green circle with ok in middle.
note:- ensure all the preloader drivers for your device are installed correctly on your pc
now reinsert the battery and start your phone.
you can also root your device easily with this recovery.
thanx and enjoy.
Click to expand...
Click to collapse
But Custom recovery for LP 5.0 is required
Were is downlod link
Sent from my Aqua Speed using XDA Free mobile app
umamahesh619ra said:
Were is downlod link
Sent from my Aqua Speed using XDA Free mobile app
Click to expand...
Click to collapse
please send me download link
Link please
try
https://forum.xda-developers.com/android/general/intex-aqua-speed-twrp-recovery-lolipop-t3560411
umamahesh619ra said:
https://forum.xda-developers.com/android/general/intex-aqua-speed-twrp-recovery-lolipop-t3560411
Click to expand...
Click to collapse
It's showing that Link doesn't exist ;(
---------- Post added at 03:53 AM ---------- Previous post was at 03:50 AM ----------
kawal771 said:
hi all,
many of you are looking for intex aqua speed 4.4.2 custom recovery.
here is philz recovery for the device
click on the link to download.
to install this recovery
turn off your phone. remove battery and keep it aside
1.) open sp flash tool
2.) choose scatter file for your device
3.) uncheck all the options in the list except recovery as shown in the screen shot
4.) press download button.
5.) now connect your phone whith out battery.
now sp flash tool will detect your phone and install the recovery.
after installation is complete it will give a green circle with ok in middle.
note:- ensure all the preloader drivers for your device are installed correctly on your pc
now reinsert the battery and start your phone.
you can also root your device easily with this recovery.
thanx and enjoy.
Click to expand...
Click to collapse
Please send link to download!
coolrolly said:
It's showing that Link doesn't exist ;(
---------- Post added at 03:53 AM ---------- Previous post was at 03:50 AM ----------
Please send link to download!
Click to expand...
Click to collapse
Added new link
umamahesh619ra said:
Added new link
Click to expand...
Click to collapse
Thanks
coolrolly said:
Thanks
Click to expand...
Click to collapse
if u like
Press thanks button in my thread
Ask any thing about intex aqua speed I will help you in my thread
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Iglorious_Nuke said:
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Click to expand...
Click to collapse
Can you tell me whats working like can you go into the recovery n all tha
PS: if you want stock rom here is the link+its stock rom not ota so dont get confused
http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
mohammedtabish said:
Can you tell me whats working like can you go into the recovery n all tha
PS: if you want stock rom here is the link+its stock rom not ota so dont get confused
http://forum.xda-developers.com/oneplus-x/general/ota003all20151024193-oxygenos-ota-dump-t3244996
Click to expand...
Click to collapse
the only thing that works for me is fastboot devices it gives something back.
The screen is complety black
it gives some feedback when loading trough vibration
Iglorious_Nuke said:
the only thing that works for me is fastboot devices it gives something back.
The screen is complety black
it gives some feedback when loading trough vibration
Click to expand...
Click to collapse
Have you tried going in recovery or bootloader
Try these commands after connecting you opx
"adb reboot-bootloader"
"adb reboot recovery"
Remove quotes
---------- Post added at 08:28 PM ---------- Previous post was at 08:04 PM ----------
N try to hold down power botton for nine seconds then hold down power for 3 sec then connect then use these commands
mohammedtabish said:
Have you tried going in recovery or bootloader
Try these commands after connecting you opx
"adb reboot-bootloader"
"adb reboot recovery"
Remove quotes
---------- Post added at 08:28 PM ---------- Previous post was at 08:04 PM ----------
N try to hold down power botton for nine seconds then hold down power for 3 sec then connect then use these commands
Click to expand...
Click to collapse
Iglorious_Nuke said:
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Click to expand...
Click to collapse
Did you try to root or install TWRP ? You just got the OP X i saw you on OP X forum:fingers-crossed:
ludoke said:
Did you try to root or install TWRP ? You just got the OP X i saw you on OP X forum:fingers-crossed:
Click to expand...
Click to collapse
I just got the opx i signed up on xda previously i was using samsung galaxy s duos but never signed up. I just readed stuff for s duos never posted anything
---------- Post added at 10:32 PM ---------- Previous post was at 09:56 PM ----------
Iglorious_Nuke said:
Hey guys ,
So can anyone help me ?
My phone died today with all the data whipped.
Is there an officiale or costume one plus X Rom ?
Fastboot works for now
Click to expand...
Click to collapse
You have wiped recovery i.e you have unlocked bootloader.now follow these steps
1. Download minimal adb amd fast boot if you already have it ignore.
2. Stock recovery.. link:- https://drive.google.com/file/d/0B3AIip-hiOnNaTVSQXk5bUgzVnM/view?usp=sharing
3. Twrp recovery... link:- https://www.dropbox.com/s/zypo7b41lvj0r2h/en-recovery-twrp-onyx-.img?dl=0
4. Stock rom :- search it on xda or i have provided a link above
Now
1.Rename twrp recovery as recovery.img then copy it to the fastboot folder now flash it through commamd "Fastboot flash recovery recovery.img"
2. Now boot into recovery comnd "adb reboot recovery"
3. Mount you storage in twrp mount option.
4. Copy the rom and stock recovery...unmount.
5.. Boot into TWRP. Install -> Select Images -> Select the recovery.img -> Proceed. Scrn shts added
6.Now Do not reboot from TWRP, your oneplus would freeze instantly. Do a "adb reboot recovery" from terminal/command-prompt instead. This will reboot to stock recovery.
7. After having boot into Stock recovery, Flash full system Dum
mohammedtabish said:
I just got the opx i signed up on xda previously i was using samsung galaxy s duos but never signed up. I just readed stuff for s duos never posted anything
---------- Post added at 10:32 PM ---------- Previous post was at 09:56 PM ----------
You have wiped recovery i.e you have unlocked bootloader.now follow these steps
...
Click to expand...
Click to collapse
this doesn't work flash has no diveces
Iglorious_Nuke said:
this doesn't work flash has no diveces
Click to expand...
Click to collapse
You sure you have installed usb drivers of opx n did you turned on the usb debugging before it went like this?
mohammedtabish said:
You sure you have installed usb drivers of opx n did you turned on the usb debugging before it went like this?
Click to expand...
Click to collapse
drivers are installed .
Usb debugging was on befor all this.
The fastreboot diveces gave feedback till 1 hour ago
Iglorious_Nuke said:
drivers are installed .
Usb debugging was on befor all this.
The fastreboot diveces gave feedback till 1 hour ago
Click to expand...
Click to collapse
Try to hold the power buttom for 3secs the connect it n then chk fastboot.... If it worked rply asap
mohammedtabish said:
Try to hold the power buttom for 3secs the connect it n then chk fastboot.... If it worked rply asap
Click to expand...
Click to collapse
still nothing :/
Iglorious_Nuke said:
still nothing :/
Click to expand...
Click to collapse
Did you charges it beacuse i think its discharged try to charge and then tell me
mohammedtabish said:
Did you charges it beacuse i think its discharged try to charge and then tell me
Click to expand...
Click to collapse
the phone is on cuz my pc says inkown divice
Iglorious_Nuke said:
the phone is on cuz my pc says inkown divice
Click to expand...
Click to collapse
Then install drivers again
Made a couple of scripts for people who are having problems moving between the beta and any CM13 compatible rom (and vice versa).
Firstly, they are both zip files but NOT FLASHABLE FILES.
Just unpack either one, go into the folder and run the rescue.bat file as admin (right click and choose "run as administrator") while you have your OP2 in fastboot mode (Windows only, anyone wanting to convert them, feel free )
All it does is flashes all the partitions from the OOS3 beta one by one and then flashes the compatible TWRP version at the end or flashes the CM13 compatible partitions and the latest TWRP (3.0.1.0 for now) at the end.
**MAKE SURE YOU HAVE COPIED THE BETA ZIP FILE ON TO YOUR PHONE FIRST OR A CM13 COMPATIBLE ROM (WITH GAPPS PACKAGE) **
Hold down your volume down key once the script is done and it'll reboot into the compatible recovery, once you wipe your system, data and cache partitions in there and flash the rom you should be good to go. Just make sure when you restart from TWRP you choose to disable the "stock recovery replacement"
To go from any rom to the OOS 3 Beta use this pack:
https://www.androidfilehost.com/?fid=24459283995310520
To go from the OOS 3 Beta to CM13 compatible use this pack (Updated with TWRP 3.0.1.0) :
https://www.androidfilehost.com/?fid=24459283995311240
Any problems after using either one post below but please DON'T FORGET TO HAVE YOUR NEW ROM READY TO GO ON THE STORAGE FOR AFTER THE SCRIPT.
djsubterrain said:
Made a couple of scripts for people who are having problems moving between the beta and any CM13 compatible rom (and vice versa).
Firstly, they are both zip files but NOT A FLASHABLE FILES.
Just unpack either one, go into the folder and run the rescue.bat file as admin (right click and choose "run as administrator") while you have your OP2 in fastboot mode (Windows only, anyone wanting to convert them, feel free )
All it does is flashes all the partitions from the OOS3 beta one by one and then flashes the compatible TWRP version at the end or flashes the CM13 compatible partitions and the latest TWRP (3.0.0.2 for now) at the end.
**MAKE SURE YOU HAVE COPIED THE BETA ZIP FILE ON TO YOUR PHONE FIRST OR A CM13 COMPATIBLE ROM (WITH GAPPS PACKAGE) **
Hold down your volume down key once the script is done and it'll reboot into the compatible recovery, once you wipe your system, data and cache partitions in there and flash the rom you should be good to go. Just make sure when you restart from TWRP you choose to disable the "stock recovery replacement"
To go from any rom to the OOS 3 Beta use this pack:
https://www.androidfilehost.com/?fid=24459283995310520
To go from the OOS 3 Beta to CM13 compatible use this pack:
https://www.androidfilehost.com/?fid=24459283995310560
Any problems after using either one post below but please DON'T FORGET TO HAVE YOUR NEW ROM READY TO GO ON THE STORAGE FOR AFTER THE SCRIPT.
Click to expand...
Click to collapse
Tried it but didn't work. The recovery remains the same een after adb shows its flashed in fastboot mode... maybe I should try unlocking the OEM again as I just flashed 3.0 beta and think it might have locked OEM
indroider said:
Tried it but didn't work. The recovery remains the same een after adb shows its flashed in fastboot mode... maybe I should try unlocking the OEM again as I just flashed 3.0 beta and think it might have locked OEM
Click to expand...
Click to collapse
Which way were you trying to go? From CM13 to 3.0 Beta or the other way round? Also did you run your command window or the script with administrator privileges?
Just updated the CM13 Rescue script to include the newly released TWRP 3.0.1.0:
https://www.androidfilehost.com/?fid=24459283995311240
indroider said:
Windows only, anyone wanting to convert them, feel free
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=66166823&postcount=7
gonna bookmark this x)
Go to OxygenOS 3.0 -> https://mega.nz/#!0xxWEAzR!jv4I-FzULD7l0tNWPsIq3Im6w91YZ1hVVuFmv6h55TA
Go back to CM13 -> https://mega.nz/#!R5oFBb6D!tzSYYafx8Uqm-ToJrU3YlHOZQ93_EQyjH5ibM_50Yxk
Disclaimer:
By using this script YOU will take full responsibility for any damage to your device!
Hardware or software! no one forcing you to use it.
So please do not blame me if you read wrong! or didn't read at all the instructions that i have written for YOU.
Will update after work with new TWRP 3.0.2.0...
Here you got I have updated the recovery in the cm13 resuce for you. Its all your work... Thank you.. Here is the link
https://mega.nz/#!LARRCTiZ
---------- Post added at 08:11 PM ---------- Previous post was at 08:03 PM ----------
First thanks for the scripts!
I tried today to get back go from OOS3 to CM13 but I now have a Chinese TWRP. Can anybody tell me how to change that back to English?! My Chinese is not really existing
Found the menue entry by testing. In case anybody else gets that problem:
- in the main menu click the 3rd button on the right
- on the top menu click the globe icon
- now you can change the language
guys , can someone share the steps for going back to CM13 to OSS 3.0
---------- Post added at 05:05 PM ---------- Previous post was at 05:05 PM ----------
I tried the process but not working for Switching from OSS 3.0 to CM13.
Please help
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
indroider said:
Here you got I have updated the recovery in the cm13 resuce for you. Its all your work... Thank you.. Here is the link
https://mega.nz/#!LARRCTiZ
Click to expand...
Click to collapse
Hey.. Can you please share the key for decryption ?
hcbhatt said:
guys , can someone share the steps for going back to CM13 to OSS 3.0
---------- Post added at 05:05 PM ---------- Previous post was at 05:05 PM ----------
I tried the process but not working for Switching from OSS 3.0 to CM13.
Please help
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
Hey.. Can you please share the key for decryption ?
Click to expand...
Click to collapse
Try this link
https://mega.nz/#!LARRCTiZ!rfjvwOIYO1v_FhKQ-CA0yDZcm33Lg5lUM_4TtWUwBgU
also u just need to extract the zip and reboot your phone into fastboot mode and the connect the mobile and open the folder where you extracted and run rescure.bat [ please do not run as admin ]
It will flash the partitions for the CM based roms and you can then reboot in recovery when the command prompt ask you to hold the down arrow key and press any key and now the trwp 3.0.2 will open and just wipe the data, system and cache and dalvik and then flash the cm and gapps you will be good to go after the reboot
Does anyone know why OP2 roms are based off two different firmwares?
indroider said:
Try this link
https://mega.nz/#!LARRCTiZ!rfjvwOIYO1v_FhKQ-CA0yDZcm33Lg5lUM_4TtWUwBgU
also u just need to extract the zip and reboot your phone into fastboot mode and the connect the mobile and open the folder where you extracted and run rescure.bat [ please do not run as admin ]
It will flash the partitions for the CM based roms and you can then reboot in recovery when the command prompt ask you to hold the down arrow key and press any key and now the trwp 3.0.2 will open and just wipe the data, system and cache and dalvik and then flash the cm and gapps you will be good to go after the reboot
Click to expand...
Click to collapse
Thanks indroider
Sent from my ONE A2003 using XDA-Developers mobile app
[/COLOR]
knpk13 said:
Does anyone know why OP2 roms are based off two different firmwares?
Click to expand...
Click to collapse
he roms are not based on different firmware the main diff with MM stock n other roms is the partion table and this is a general scenario for many mobiles
---------- Post added at 11:32 PM ---------- Previous post was at 11:26 PM ----------
hcbhatt said:
Thanks indroider
Sent from my ONE A2003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Your most welcome. Is your issue resolved? Hit thanks if you wish ..
THIS POST IS EXTENSION TO
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5122-android-n-34-2-2-47-t3594502
Please read carefully and flash kernel for the LATEST UPDATE (Project SUZU )
34.3.A.0.244 - 7.1.1 - 09 NOV 2017 update
F5122 IS AT https://mega.nz/#F!DEQykYjL!Vux2m1_Rug9hg9B4_q0ifw
F5121 .. https://mega.nz/#F!CBhRyR7Z!L5uo_GWiCzXcNWQaZGJ9bQ (THANKs @eagleeyetom )
both f5121/5122 folders have 1 kernel image,
FLASH THE ROM
FLASH THE KERNEL,
FLASH TWRP,
BOOT IN TO TWRP .
FLASH MAGISK or SUPERSU, VIA FLASHABLE ZIP
BOOT THE DEVICE
IF YOU HAVE FLASHED MAGIK THEN INSTALL MAGIS MANAGER
MAGISK POST https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
CHAINFIRE SUPERSU ZIPs LATEST AT https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
-if you don't have th 34.3 fsc script , i have included in the folder (closing Partitions takes TIME, so be Patient ! )
-also i have inclused mixer_paths_wcd9335.xml, on 98% VOLUME level, IF you think sound output is LOW,,, just REPLACE it from /system/etc folder!
-
.
Click to expand...
Click to collapse
PREVIOUS KERNELS
for F5122_34.3.A.0.238 - 7.1.1 - 2 OCTOBER 2017 update
https://forum.xda-developers.com/xperia-x/development/rooted-kernels-f5121-f5122-34-3-0-238-t3683968
for F5122_34.3.A.0.224 - 7.1.1 - 8 SEPTEMBER 2017 update
https://forum.xda-developers.com/xp...ted-kernels-f5121-f5122-34-3-0-224-8-t3669793
for F5122_34.3.A.0.217 - 7.1.1 - 8Aug2017 update
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5121-f5122-34-3-0-217-7-t3654368
for F5122_34.3.A.0.206 - 7.1.1 - july2017 update
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f512234-3-0-206-7-1-1-t3635595
Hi,
Thx for this new update but i dont found the kernel in the package.
I found the img.clean, twrp, fsc, sr5 and magisk but no kernel..
So what can i do for F5121!?
Siggi
siggi77 said:
Hi,
Thx for this new update but i dont found the kernel in the package.
I found the img.clean, twrp, fsc, sr5 and magisk but no kernel..
So what can i do for F5121!?
Siggi
Click to expand...
Click to collapse
on https://mega.nz/#F!CBhRyR7Z!L5uo_GWiCzXcNWQaZGJ9bQ
the F5121_34.3.A.0.244_su.img is the kernel
just flash and your device will wakup ROOTED.
twrp 3.1.1 problem
on my 64 GB xperia X F5122
1. after flashing ROM if
2. I flash twrp 3.1.1 it will
3. make my system partition 40GB and i get only 20gb workable
I tried many things but flashing recovery via adb always create this problem and if i BOOT the device before going in to the partition , sony stockrom makes internal storage encrypted which then twrp3.1.1 is unable to read
plz help
@serajr @shoey63 @munjeni
Hi,
Ok thx this package is complete...
Great
Siggi
---------- Post added at 09:37 PM ---------- Previous post was at 09:33 PM ----------
Hi,
OK this file is not a .img:
F5121_34.3.A.0.244_su is the kernel but isn´t a .img
Please make a new package
Siggi
---------- Post added at 10:22 PM ---------- Previous post was at 09:37 PM ----------
In the package for F5122 is the corret .img, but for F5121 not or is the same?
siggi77 said:
Hi,
Ok thx this package is complete...
Great
Siggi
---------- Post added at 09:37 PM ---------- Previous post was at 09:33 PM ----------
Hi,
OK this file is not a .img:
F5121_34.3.A.0.244_su is the kernel but isn´t a .img
Please make a new package
Siggi
---------- Post added at 10:22 PM ---------- Previous post was at 09:37 PM ----------
In the package for F5122 is the corret .img, but for F5121 not or is the same?
Click to expand...
Click to collapse
i am sorry,
i have fixed it
please check again
thank you
Hi, great
thx for the new package
Siggi
clean kernel image is drm fixed??
kloroform said:
clean kernel image is drm fixed??
Click to expand...
Click to collapse
yes sir, it is,
That is little bit complicated we need a good guide
---------- Post added at 02:56 PM ---------- Previous post was at 02:31 PM ----------
I flashed rom>kernel with su then flashed twrp.
Later I flashed the magisk.zip and reboot the system but everytime its entering the twrp screen.
Wont going bootanimation and starts the phone. Just twrp screen.
OH GOD I SOLVED THIS. HERE MY SOLUTION:
First things first, I WANT TO FLASH MAGISK AND NO MORE USE SUPERSU, THATS I WANT. IF YOU WANT TO USE MAGISK HERE IS MY SOLUTION.
1. Flash the stock rom on the post. (up)
2. When flash finished, boot the phone and close the phone.
3. Flash the clean kernel with flashtool.
4. Boot the phone, is everything okay, close again.
5.a So there is little bit strange, open adb on windows (yes really. dont use flashtool this time)
5.b Flash the twrp-3.1.1-suzu-2017.07.16.img from this address: https://androidfilehost.com/?w=files&flid=197369 (on the middle)
5.c the command is here "fastboot flash recovery twrp-blablabla.img"
6. and type "fastboot reboot" will boot up your phone.
7. If its really open, -not stuck at the sony logo or everytime goin in twrp- you did! congrats!
I hope it help you
xxarigattoxx said:
That is little bit complicated we need a good guide
---------- Post added at 02:56 PM ---------- Previous post was at 02:31 PM ----------
I flashed rom>kernel with su then flashed twrp.
Later I flashed the magisk.zip and reboot the system but everytime its entering the twrp screen.
Wont going bootanimation and starts the phone. Just twrp screen.
OH GOD I SOLVED THIS. HERE MY SOLUTION:
First things first, I WANT TO FLASH MAGISK AND NO MORE USE SUPERSU, THATS I WANT. IF YOU WANT TO USE MAGISK HERE IS MY SOLUTION.
1. Flash the stock rom on the post. (up)
2. When flash finished, boot the phone and close the phone.
3. Flash the clean kernel with flashtool.
4. Boot the phone, is everything okay, close again.
5.a So there is little bit strange, open adb on windows (yes really. dont use flashtool this time)
5.b Flash the twrp-3.1.1-suzu-2017.07.16.img from this address: https://androidfilehost.com/?w=files&flid=197369 (on the middle)
5.c the command is here "fastboot flash recovery twrp-blablabla.img"
6. and type "fastboot reboot" will boot up your phone.
7. If its really open, -not stuck at the sony logo or everytime goin in twrp- you did! congrats!
I hope it help you
Click to expand...
Click to collapse
the guide is here
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5122-android-n-34-2-2-47-t3594502
also twrp3.1.1 works best at 32gb variant by giving 20gb workable and putting systemparittion to 12gb
however it does the SAME with 46gb variant and give only 20gb workable and put system partition 40 gb
thats why for 64gb variants i don't recomend using twrp3.1.1
Hi, when you say flash the rom you mean in Flashtool ? There is no twrp flashable rom here ?
Jomoteck said:
Hi, when you say flash the rom you mean in Flashtool ? There is no twrp flashable rom here ?
Click to expand...
Click to collapse
once you flash the modified kernel with supersu then there is no need for twrp, simply boot your device and it will wakeup rooted.
however if you wana use magisk and your device is 64gb then i highly recommend you to do this
1. flash rom
2. flash the modified kernel
3. boot the device and go thru sony setup , give google account and let it sync
4. switch off mobile after 15 or so mins
5. flash twrp3.1.1 suzu (given in the mega link, in the OT)
6. HOLD power and VOLUME DOWN BUTTON till PINK led comes on sonylogo and you are taken to twrp, keep system readonly and flash magisk ( via otg or if you had it in your sd card prior) ( at this point you may flash other zips also, if there are any)
7. twrp may give you error such as... cannot mount internal storage etc, just ignore.
8. after flashing, switchoff mobile, and boot it into system.
9. for safty purposes, you can erase twrp by connecting device in fastboot mode and executing following command
Code:
fastboot erase recovery
now you can ask me why i let you boot your device first. normally its unprecedented.
the reason i explain here
https://forum.xda-developers.com/showpost.php?p=74573987&postcount=121
hello
i have 34.3.A.0.217 rom with root. how can i update 34.3.A.0.244 ? can you help me anyone ?
nova001 said:
hello
i have 34.3.A.0.217 rom with root. how can i update 34.3.A.0.244 ? can you help me anyone ?
Click to expand...
Click to collapse
1. download 34.3.A.0.244 using xperifirm under flashtool
2. flash it using flashtool (please google the tutorial ) (wipe everything while flashing
**** TAKE BACKUP of EVERYTHING (DATA) ****
YasuHamed said:
1. download 34.3.A.0.244 using xperifirm under flashtool
2. flash it using flashtool (please google the tutorial ) (wipe everything while flashing
**** TAKE BACKUP of EVERYTHING (DATA) ****
Click to expand...
Click to collapse
thats oke, but we cant dowload anywhere? only xperifirm ?
nova001 said:
thats oke, but we cant dowload anywhere? only xperifirm ?
Click to expand...
Click to collapse
Xperifirm is the best
Other servers i cant guarantee
I was able to flash rom, flash kernel, flash root and boot the phone and was able to use it.
PROBLEM:
- It heats up during use.(FIXED) constant mobile data was the cause..
- Everytime I lock the screen my mobile data turns on when I unlock the SCREEN. (FIXED) disable find my device as administrator.
HI question does FCS_thermal_Xperia_X_v1.3.zip work for Nougat?
cyanides13 said:
HI question does FCS_thermal_Xperia_X_v1.3.zip work for Nougat?
Click to expand...
Click to collapse
Yes it works I use it actually.
Custom TWRP Recovery for Nokia 4.2 codename Panther
Firmware : 136
For September Security patch
Link: https://drive.google.com/drive/folders/1tqQVK_IAQLSq2RDHhPD_p3v7IEXkAwbI?usp=sharing
Request: Unlocked bootloader
How to install:
Go to bootloader/fastboot mode:
fastboot flash boot "path to twrp.img"
Control volume to "reboot recovery mode"
Done
It no support decrypt data at the moment. So,you need format data
fix slot on sep twrp
Added a/b slot. You can flash system,boot to a or b if you want
Update link tomorrow
Good news: Tree ready for build rom
Bad news: doesnt boot???
Hello, the TWRP link above is no longer available. Can you send it to my mailbox? Thank you! Email account: [email protected]
clurs said:
Hello, the TWRP link above is no longer available. Can you send it to my mailbox? Thank you! Email account: [email protected]
Click to expand...
Click to collapse
I sended a friend request in qq,check it
Is there a way to use this on october patch?
thegamingcat13 said:
Is there a way to use this on october patch?
Click to expand...
Click to collapse
I cant test it. My computer cant backup oct patch. I think you need ask calyx for it
thinhx2 said:
I cant test it. My computer cant backup oct patch. I think you need ask calyx for it
Click to expand...
Click to collapse
Ok thank you
Hello,
I want to port TWRP to my Nokia 3.2. how did you port it? Or what's the procedure?
Thanks
s3tupw1zard said:
Hello,
I want to port TWRP to my Nokia 3.2. how did you port it? Or what's the procedure?
Thanks
Click to expand...
Click to collapse
send me boot.img of 4.2
Hi, I've uploaded the firmware here:
https://drive.google.com/file/d/1jJkDi807fagKFJ1ggzFY1Lc4TGY-llEB/view
If you don't want to download the whole firmware I'll upload the boot.img file when I'm at home on my computer.
Thanks
---------- Post added at 10:07 AM ---------- Previous post was at 09:57 AM ----------
Btw. Could you write a guide on how to Port TeamWin for Android One devices? I think it would be interesting for other people who don't have TeamWin for their Android One devices.
---------- Post added at 10:42 AM ---------- Previous post was at 10:07 AM ----------
I got the boot img from my system using dd. I packed boot_a and boot_b into a rat file
https://drive.google.com/file/d/1-DRQ_LRdEMez-Qpj2jboJsDysG5awl_b/view?usp=drivesdk
Hi,
how did you port TWRP to Nokia 4.2 ? Is there a guide on how to do this ?
bro can u please how to use the files??!!
Any news on this
Which variants of the 4.2 will this work on?
doesnt work just stuck on twrp loading
Hi everyone. I am trying to install twrp but stuck at fastboot menu.
I have unlocked bootloader, because it says device state: unlocked. Then i am trying to fastboot flash but get error. I am trying flash:raw and set_active a and b. I try boot recovery.img. no matter what I do the phone restarts, shows android logo and then go back to fastboot. Fastboot devices shows the phone. What am I missing? Wrong files, wrong order, any better guide or files to test? I am not sure what I have done also flashed a vbmedia file