Charging speed - Xiaomi Redmi 4X Real Life Review

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi 4X can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!

My charger taking 6hrs to charge after flashing 7.1 custom ROM,then I went back to miui 8,9 same issue Exists!!
Any suggestions for this??

anywhere around 2.5 hrs.

in miui Forums i read that you can buy a quick charge 3.0 charger (3 ampere) and this will enable QC feature. Charging time will jump under 2 hours for full charge

merlin.berlin said:
in miui Forums i read that you can buy a quick charge 3.0 charger (3 ampere) and this will enable QC feature. Charging time will jump under 2 hours for full charge
Click to expand...
Click to collapse
its safe for battery life for prevent "drop"?

merlin.berlin said:
in miui Forums i read that you can buy a quick charge 3.0 charger (3 ampere) and this will enable QC feature. Charging time will jump under 2 hours for full charge
Click to expand...
Click to collapse
Have you tried that?

saikumar parate said:
My charger taking 6hrs to charge after flashing 7.1 custom ROM,then I went back to miui 8,9 same issue Exists!!
Any suggestions for this??
Click to expand...
Click to collapse
Take a Qualcomm quick charger

Radnanum said:
its safe for battery life for prevent "drop"?
Click to expand...
Click to collapse
Yes saye i am using a turbocharger which came with motorola and no issues miui also shows a quick charge icon while using charger

I've upgraded to miui 9 and use zenfone 2 adapter, finally it show qc status.. charge faster than using orig adapter

After fast charging kernal 51-72 on using the phone it took 20 min so implies 100% in 100 mins ?

2:45hs with the stock 5v_2A charger. from 1 to 100%

Related

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the honor 5X can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Takes almost 2 hours with me using a 2.1a fast charger
prateek57 said:
Takes almost 2 hours with me using a 2.1a fast charger
Click to expand...
Click to collapse
if you have gsm battery app you can see that the phone cannot accept 2.1A,
it's the big cons indeed!
Takes 2h20m from an Anker IQ 2.4A charger (1-100%) With the stock 1A charger it takes 3+ hours.
I just got mine and it charges much faster with a 2 amp charger. I am using a 5 port Aukey with one port that has the Qualcom fast charge 2.0.
I also have a Blu VIVO 5 and the Honor charges just as fast as that with the 2 amp charger. The Blu Vivo 5 includes a 2amp in the box while the honor does not.
On my HTC One and my Sony Xperia Z3 compact, https://play.google.com/store/apps/details?id=com.gombosdev.ampere reports something in the neighborhood of 1.4-1.7 amperes with a Quick Charge 2.0 charger, and I go from 1% to 60% in about 20-30 minutes as claimed. On my Honor 5X, the highest I see the app report is 850 mA, and it takes about as long as what everyone else is reporting. With a non-Quick Charge charger I get about 550 mA.
Edit: 850 mA is what I often see using one of my chargers. I'm using a different one right now and just now I saw it as high as 1.1 A.
Using an USB multimeter I can see it charge at 1A with my Blitzwolf 5 ports charger.
Honor 5x L22 model take around 3 hours to charge from 0-100%.
Wish they would enable Qualcomm Quick Charge tech for this device since the Chinese market version has it by default. It takes quite a while to charge from 0-100
Good speed with the normal 2 Amp charger. reaches 100% in and around 2hrs
Quite slow
upto the mark
Coming from a fast charging phone, honor 5x is quite slow. But it is OK as i use the phone normally so from 100 to 0 it last easily 2 days.
Sent from my KIW-L21 using XDA-Developers mobile app
yep they should have used some sort of quick charge
0-100% takes 2 and a half hours usually.
2hours with 2A charger
It's still very slow
Plus side is slower charge will keep your battery in better health and longer lifespan . fast charge is real harsh on the battery pack .
I find mine takes almost 3 hrs from about 5% to full when on and 4G running . You can get 60% in an hr or less which not bad .
Mister B said:
Plus side is slower charge will keep your battery in better health and longer lifespan . fast charge is real harsh on the battery pack .
I find mine takes almost 3 hrs from about 5% to full when on and 4G running . You can get 60% in an hr or less which not bad .
Click to expand...
Click to collapse
VOOC from Oppo is the most efficient.
2 hours average from 5-100% on stock charger.

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 4 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Took me 3hrs to fully change my Mido. 0-100%
3-4 hours for a full charge, this thing really needs fast charging feature to charge this huge 4100mha battery..
Me too 3 to 3.30 minutes.If we use it while charging it charging slowly .
My phone take around 2 or 3 hours
2-3 hours as well, but I just charge while I'm sleeping. It easily lasts the full day, so I don't need to charge during the day
Charging RN4 mido is damn slow. It takes around 3hrs for 0-100% topup but why complain when the device lasts for 2days with 10+ hrs of SOT.
Anyone tested charging speed using a kernel that supports fast charging?
My phone takes around 2-2h30 hours to fully charge.
10% to 100% --> 2 hour 50 minutes
2.40 min if on if off around 2.20 if off
is there by any chance to enable fast charging on this device?
My phone takes around 1-1h30 hours to fully charge. Am from Brazil, here uses 230vts in my region...
Enviado de meu Redmi Note 4 usando Tapatalk
3hrs to fully change my Mido. 0-100%
Guys .. Is there a solution to enable the fast charging.
Thanks.
Mulham82 said:
Guys .. Is there a solution to enable the fast charging.
Click to expand...
Click to collapse
Get a micro-USB cable that is 22 AWG or lower (the lower the AWG rating the better). And make sure that the cable is made by a high quality manufacturer.
Charging Time
My Phone charges from 0-100 in 2 hours maximum.
Excuse me but charging Redmi Note 4 with STOCK ROM from zero % to 100% takes minimum 3 hours using the cable and charger from the box.
On stock rom I think it's impossible to go under 3h. What is Your take on this?
3 hours to fully charge my rn4 mido. If this device have quick charge it would greater than it is now
mercury**** said:
3 hours to fully charge my rn4 mido. If this device have quick charge it would greater than it is now
Click to expand...
Click to collapse
The stock charger doesn't come with quick charge, just buy qc charger that is 3.0 (I suggest Aukey qc) and you'll get atleast 2 hrs charge from 0-90%.

Quick Charge 3.0 Kernel?

Hi, I'm using the 4x snapdragon, with the final Resurrection rom.
Can someone recommend a good kernel with quick charge and works alongside this rom?
Thanks in advance.
oXydead said:
Hi, I'm using the 4x snapdragon, with the final Resurrection rom.
Can someone recommend a good kernel with quick charge and works alongside this rom?
Thanks in advance.
Click to expand...
Click to collapse
The Xiaomi Redmi Note 4(X) doenst support Quick Charge!
Snapdragon 625.
I recall that the chip does and xiaomi within the kernel restricted that.
oXydead said:
Snapdragon 625.
I recall that the chip does and xiaomi within the kernel restricted that.
Click to expand...
Click to collapse
No they did not, it's not kernel related but the charging board and battery that are not compatible.
Thanks for the info.
Why so obsessed to quick charge?
It's not much faster than the regular charge.
Quick charge enabled phone charge the 3000mah battery in 1.5hours... If the battery is larger 4000mah, it will takes approximately 2 hours to charge.
RN4 regular charge is about 2 hours 15mins... Its just 15 minutes longer and if we usually charge it overnight, its nothing difference... you want to take the unknown risk?
666dsa666 said:
No they did not, it's not kernel related but the charging board and battery that are not compatible.
Click to expand...
Click to collapse
Are you sure? Source? Or do you mean that they are not rated for QC?
aabenroi said:
you want to take the unknown risk?
Click to expand...
Click to collapse
Yes!
We do all sort of things with our devices that are outside of "safe use". We overclock and overvolt them, flash stuff that could potentially brick them, etc.
As to why? I wouldn't charge the device from 0-100 with QC enabled but i sure as hell would like to charge it for 5 min and get 20-30%
If QC could be enabled it has to be tested sure, maybe it wouldn't be a good idea with an ambient T of 30C maybe the cut of point would be 60% or 20min. But yes I would like to test it.
Peace
ready for dwialli bomb?
Aletheia said:
Are you sure? Source? Or do you mean that they are not rated for QC?
Yes!
We do all sort of things with our devices that are outside of "safe use". We overclock and overvolt them, flash stuff that could potentially brick them, etc.
As to why? I wouldn't charge the device from 0-100 with QC enabled but i sure as hell would like to charge it for 5 min and get 20-30%
If QC could be enabled it has to be tested sure, maybe it wouldn't be a good idea with an ambient T of 30C maybe the cut of point would be 60% or 20min. But yes I would like to test it.
Peace
Click to expand...
Click to collapse
When it comes to play the electricity, the risk isn't your phone brick but bomb...
And it will nowhere near 20-30% in 5 minutes.
LG G5 that have QC 3.0 enabled charge around 10% in 5 minutes. its with 2800mah battery, faster usb-c, etc...
What's the battery charging rate with a stock charger? My stock charger gives 1300mah at 70% and a Blitzwolf QC 3.0 gives 1700mah at 70%.
aabenroi said:
When it comes to play the electricity, the risk isn't your phone brick but bomb...
And it will nowhere near 20-30% in 5 minutes.
LG G5 that have QC 3.0 enabled charge around 10% in 5 minutes. its with 2800mah battery, faster usb-c, etc...
Click to expand...
Click to collapse
Well sure it won't be for every one, there is a real risk of the battery catching fire (bomb is a bit hyperbolic) . That's why IF it's possible people willing to take the risk have to test it out. Some might think it's worth the risk though.
My admittedly rusty back of the napkin math says it should be theoreticly possible to get 20% With 20V and 3.6A in less than 7 min.
portgasfire said:
What's the battery charging rate with a stock charger? My stock charger gives 1300mah at 70% and a Blitzwolf QC 3.0 gives 1700mah at 70%.
Click to expand...
Click to collapse
1-80 should be close to 2000mah.
I have 2 rn4, comes with different stock charger.
EU and US plug
Stock charger with EU plug, charge about 1400-1600mah
Stock charger with US plug, charge about 1800-1900mah
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
Aletheia said:
Well sure it won't be for every one, there is a real risk of the battery catching fire (bomb is a bit hyperbolic) . That's why IF it's possible people willing to take the risk have to test it out. Some might think it's worth the risk though.
My admittedly rusty back of the napkin math says it should be theoreticly possible to get 20% With 20V and 3.6A in less than 7 min.
Click to expand...
Click to collapse
Wow thats much quicker than op5 dash charge :good:
As I know Jun ao kernel is support qc 3.0
aabenroi said:
Why so obsessed to quick charge?
It's not much faster than the regular charge.
Quick charge enabled phone charge the 3000mah battery in 1.5hours... If the battery is larger 4000mah, it will takes approximately 2 hours to charge.
RN4 regular charge is about 2 hours 15mins... Its just 15 minutes longer and if we usually charge it overnight, its nothing difference... you want to take the unknown risk?
Click to expand...
Click to collapse
you are wrong,
RN4 snapdragon need 3 hour 5m for fully charged (10~100%) with 5V2A charger
and the advantage of QC is they charge very fast in 0~70% (about 30min only) then slower until 100% (max 1H 40m total)
aerialus said:
you are wrong,
RN4 snapdragon need 3 hour 5m for fully charged (10~100%) with 5V2A charger
and the advantage of QC is they charge very fast in 0~70% (about 30min only) then slower until 100% (max 1H 40m total)
Click to expand...
Click to collapse
Oh please, 0-70% in 30 minutes?
Read here buddy: https://www.androidauthority.com/oneplus-5-galaxy-s8-battery-charge-781682/
Congratz.... You found better technology than OP5 dash charge and you don't need the fancy usb-c.
I just measured my RN4 charge speed
0-90 : less than 2 hour
90-100 : you need 45 minutes
aabenroi said:
Oh please, 0-70% in 30 minutes?
Read here buddy: https://www.androidauthority.com/oneplus-5-galaxy-s8-battery-charge-781682/
Congratz.... You found better technology than OP5 dash charge and you don't need the fancy usb-c.
I just measured my RN4 charge speed
0-90 : less than 2 hour
90-100 : you need 45 minutes
Click to expand...
Click to collapse
I can say that because i have zenfone 2 with Quick charge support bro,, my zen2 only need 30m~40m from 10% to 60~70%
And can you upload log battery from 0~100 ?
Because i have 2 mido and all need 3hour for fully charge,, check my prove in attachment (log battery charge mido)
My friends also need +-3H for fully charged reno4
aerialus said:
I can say that because i have zenfone 2 with Quick charge support bro,, my zen2 only need 30m~40m from 10% to 60~70%
And can you upload log battery from 0~100 ?
Because i have 2 mido and all need 3hour for fully charge,, check my prove in attachment (log battery charge mido)
My friends also need +-3H for fully charged reno4
Click to expand...
Click to collapse
Well my sister has a zen 2 too... It's not quick charge..
Quick charge is qualcomm tech, zen 2 have intel on it.
And zen2 just have 3000mah battery on it, mido is 4000mah capacity... It's 25% larger. Its totally different...
Before using mido, I was using mi5s that have QC 3.0, with legit 3.0 charger and usb-c, its no way 60-70% in 30 minutes.
Well I have 2 mido, come with 2 different stock charger. One is RN4 global, with EU plug... Yes it will need about 3 hours to charge. One is RN4x, come with chinese charger. It need 2.5 hours to top... 2 hours will get you from 10 to anywhere between 10-90+%, the last 10% is very slow...
Will provide logs later, because I've fully charged my phone this morning and still have 78% left this afternoon.
I've measured this morning charge... Start from 17% to 90% takes 100 minutes.
Note 4 takes less than 2 hours for full charge 10-100%. Just don't use the phone while charging.
Sent from my Redmi Note 4 using Tapatalk
Yeah, need at least 2hours to charge from critical value to 90 percent, as my experience fully charge ur phone is bad (i prefer to charge till 95 to 97 percent) furthermore the screen on time is the same.
Sent from my Redmi Note 4 using Tapatalk
aerialus said:
I can say that because i have zenfone 2 with Quick charge support bro,, my zen2 only need 30m~40m from 10% to 60~70%
And can you upload log battery from 0~100 ?
Because i have 2 mido and all need 3hour for fully charge,, check my prove in attachment (log battery charge mido)
My friends also need +-3H for fully charged reno4
Click to expand...
Click to collapse
As request, this is my charge logs....
Yours from 10%... 1 hour charge = 39%
While mine from 10%... 1 hour charge = 58%
Sorry, I have many work to do and need my phone, so I can't do full charge now. You can see the graph, I have to use my phone while charging... Should be more than 58% if I do not use it

Quick charge not working on 9.6.25?

Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
vichucoolics said:
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
Click to expand...
Click to collapse
download amps app and check current rating feed to your phone, fast charge > 2500 mA, if lower, try change your charger.
vichucoolics said:
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
Click to expand...
Click to collapse
After the update mine also shows 3hr's to charge and slowly charging. I brought the phone 10 days back and updated to this 9.6.25 a week and facing this problem.
Have no problem at all with Poco f1 Miui 9.6.25. Charging time is around 1hr 45 to 2 hrs if not mistaken.
izharie said:
download amps app and check current rating feed to your phone, fast charge > 2500 mA, if lower, try change your charger.
Click to expand...
Click to collapse
Ive already tried it it shows almost 1450 ma
And ive tried with different cable ... different charger and even qc3 power bank no luck so far could it be a hardware issue in my phone?
vichucoolics said:
Ive already tried it it shows almost 1450 ma
And ive tried with different cable ... different charger and even qc3 power bank no luck so far could it be a hardware issue in my phone?
Click to expand...
Click to collapse
Try to charge below 50% from current battery level.my stock charger rating 5V 2.5A..can get around 2.2A reading from app.
Its starts slower then it gets faster , from 10% to 100 % in under 2h , so its working properly.
vichucoolics said:
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc 3 certified devices and it also dsnt show the quick charge logo in the notification drawer!!!
Iam in 9.6.25 global rom can any body confirm if its a rom issue or my specific issue
Click to expand...
Click to collapse
Having the same issue, plz help regarding the same
Buncy said:
Having the same issue, plz help regarding the same
Click to expand...
Click to collapse
Don't worry its just a software issue I just flashed the miui 10 beta Rom and now everything is fine it shows the QC logo also
Me too facing the issue. In the screenshot, charging at 18% and showing 920 mAh
Me too facing the same issue and i am on Miui 9.6.25 as well.
I just had a chance to check it, as I recently upgraded to 9.6.25. Well, no changes for me - there is QC icon next to the battery and Ampere shows current reaching 2900 mA.
katoda_ltd said:
I just had a chance to check it, as I recently upgraded to 9.6.25. Well, no changes for me - there is QC icon next to the battery and Ampere shows current reaching 2900 mA.
Click to expand...
Click to collapse
Can you upload a screenshot of ampere while charging
Here you are.
Buncy said:
Can you upload a screenshot of ampere while charging
Click to expand...
Click to collapse
Please check it out
You guys don't use the search function on the thread and just keep on making new threads about the same issue.
It has been well documented now that the charging slows due to thermal throttling. The hotter the phone the slower the charging. If anyone wants to test this, charge your phone for 5 mins before an air conditioner and measure the charging speed using the app called 'Amps'.
You should see the charging speed at around 2700-2800mah provided your phone temperature is quite low.
Otherwise, take a chilled watter bottle from your fridge and pour it generously on a towel. Now place your phone on that towel and charge you phone. As soon as the temperature starts falling to around 32-34 degree celsius, the charging speed will increase.
This is built in safety feature. The charging slows when the battery temperature is around 36-37 degree celsius as per my observations.
Cool you battery to around 30 degrees using any method you can and then check the charging speed.
Not your charger, not your cable...its mostly the charging algorithm with built in thermal thresholds which is at play here.
DO TELL ME YOUR TEST RESULTS.
I just found this thread - I have similar problem but it's rather not connected with temperature.
After one of software updates I discovered that quick charge is not working. Maybe it wasn't connected with update but this is how I see this.
I was waiting for software updates and hoping that they will fix my problem but nothing was changing.
Recently I decided that maybe factory reset will help, but unfortunately no.
After this reset I was checking many chargers and it appeared that with laptop charger (with USB C output) quick charge works! I was checking parameters in application 'ampere' and there is information that this charger is AC, and rest is USB. So it looks like QC works but....
Please help, how can I make quick charge works again via standard quick charge charger.
Guys recently i just noticed my device charging slower tham usual with the stock charger as well as other qc
Iam in 11.0.5.0 global rom can any body confirm if its a rom issue or my specific issue
I want to clarify that my Poco on fully stock 11.05 charges as fast as any previous version of MIUI.
I take care of my battery. Charge till 80 and never let or go below 20.
If you can maintain the variables, and it still charges slow then you have issues with battery IC or the battery itself.
The highest I got without ceiling fan and without ac is 1590 mA. Maybe I got higher other times but I installed the app just for this post.
Don't rely on software reporting.
Do you have a multimeter?
Ambient temperature plays a HUGE role when it comes to battery, even if it's 1 degree more or less.

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Realme X2 Pro can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Quick isn't the word. It's amazing seeing how fast it charges.
Can it be charged with a 5 volt charger?
I think I have a problem with fast charging.
Yesterday while the phone was charging, electricity in my house was shutted down. When it came back, I can see than now, I charge 1 % on 35 seconds, instead of 20 sec before.
Could it have the battery damaged ? I doubt so, buty it's strange.
I tried when battery was 82%
Maybe it's quicker when battery is low ?
What's your thoughts about this situation ?
Thanks !
Edit : Okay, after 85% it slows down, but before it's okay
ManuBBXX said:
I think I have a problem with fast charging.
Yesterday while the phone was charging, electricity in my house was shutted down. When it came back, I can see than now, I charge 1 % on 35 seconds, instead of 20 sec before.
Could it have the battery damaged ? I doubt so, buty it's strange.
I tried when battery was 82%
Maybe it's quicker when battery is low ?
What's your thoughts about this situation ?
Thanks !
Edit : Okay, after 85% it slows down, but before it's okay
Click to expand...
Click to collapse
Yeah it slows down towards the end I'll go from 0-99 in 28-30 min then takes some time sometimes to get the last 1%. Battery life is also incredibly good.
chipcamel said:
Yeah it slows down towards the end I'll go from 0-99 in 28-30 min then takes some time sometimes to get the last 1%. Battery life is also incredibly good.
Click to expand...
Click to collapse
Wrong screenshot
chipcamel said:
Wrong screenshot
Click to expand...
Click to collapse
Yeah battery life is outstanding..
Anyway, I have a little weird thing :
This battery monitor stats shows me different SOT than GSAMBatteryMonitor.
GSAM shows 2 hours more (wich I think wrong), and this delay grows while battery dercreases.
Do you have this app showing the same stats than colorOS battery monitor ?
ManuBBXX said:
Yeah battery life is outstanding..
Anyway, I have a little weird thing :
This battery monitor stats shows me different SOT than GSAMBatteryMonitor.
GSAM shows 2 hours more (wich I think wrong), and this delay grows while battery dercreases.
Do you have this app showing the same stats than colorOS battery monitor ?
Click to expand...
Click to collapse
I just downloaded the app you're talking about give me a day or so I'll give you an update
50W Charge is impressive can't wait to get in hands.
Can you disable fast charge (like in samsung galaxy note 9)?
What time does it take to reach 100 from 0?
ManojKing said:
What time does it take to reach 100 from 0?
Click to expand...
Click to collapse
Usually 28 minutes and a maximum of 35
labib2002 said:
Usually 28 minutes and a maximum of 35
Click to expand...
Click to collapse
Yes it's really fast
Greetings.
I got my X2 Pro about 2 days ago. Charging speed is even better than advertised, as it takes less than 30 minutes to reach full charge. But phone usually gets too hot when fast charging. Do I experience this problem alone or do you guys too? Kinda worried about battery health in the long run if it gets too hot everytime I charge it.
Thanks before
reyhanjuala said:
Greetings.
I got my X2 Pro about 2 days ago. Charging speed is even better than advertised, as it takes less than 30 minutes to reach full charge. But phone usually gets too hot when fast charging. Do I experience this problem alone or do you guys too? Kinda worried about battery health in the long run if it gets too hot everytime I charge it.
Thanks before
Click to expand...
Click to collapse
Same thing here, so I don't charge more than 40 - 45% at a time.
If my battery is below 50%, I charge in 2 times with a 10 min pause.
Doing sop, you don't reach hoptter than 33 degrees instead of 38+
I can't seem to get a decent standard charging from 5V 2A chargers or Powerbanks, even a QC3 Powerbank only delivers 0,9-1A.
I only get about 900mA according to the Ampere-App. {On the contrary, I even get 1,8A from the original wall plug at 80% SoC).
Do you also struggle?
devilgenius said:
Can you disable fast charge (like in samsung galaxy note 9)?
Click to expand...
Click to collapse
I tried to use a 5 watt charger, and it works. Been searching in settings for an option to disable fast charging, but I can't find one.
---------- Post added at 09:07 AM ---------- Previous post was at 09:04 AM ----------
Polarfuchs said:
I can't seem to get a decent standard charging from 5V 2A chargers or Powerbanks, even a QC3 Powerbank only delivers 0,9-1A.
I only get about 900mA according to the Ampere-App. {On the contrary, I even get 1,8A from the original wall plug at 80% SoC).
Do you also struggle?
Click to expand...
Click to collapse
Same here. I used a 9V 2A charger, and it won't go more than 1100mA.
I wonder if this is a detection error from the apps. I think they don't consider the dual battery layout and only display half of the true value.
The error that the app "charger tester" shows let's me think this or does support my theory.
All apps seem to not be able to show the correct current flow because of the dual-batteries.
I found the engingeering mode and can confirm that the phone charges with 5V 2A on dumb chargers.
And also supports QC 18W with 9V 2A
As well as the Oneplus 20W Dash charger with 5V 4A.
Polarfuchs said:
I can't seem to get a decent standard charging from 5V 2A chargers or Powerbanks, even a QC3 Powerbank only delivers 0,9-1A.
I only get about 900mA according to the Ampere-App. {On the contrary, I even get 1,8A from the original wall plug at 80% SoC).
Do you also struggle?
Click to expand...
Click to collapse
physixthegreat said:
I tried to use a 5 watt charger, and it works. Been searching in settings for an option to disable fast charging, but I can't find one.
---------- Post added at 09:07 AM ---------- Previous post was at 09:04 AM ----------
Same here. I used a 9V 2A charger, and it won't go more than 1100mA.
Click to expand...
Click to collapse
Super VOOC (and also VOOC) have their own protocol of charging mechanism. It's not the same with other quick charge method like Quick Charge 3.0.
You will not have VOOC charging if you are not using right adapter and right cable. You try use Super VOOC charge with other USB cable, VOOC charging will not work.
So when you using other adapter or cable, you'll got standard 5V charging max 2A.

Categories

Resources