Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Introduction
This thread is for early development of Android Oreo on the n1awifi (SM-P600).
It is not yet ready for daily usage (far from it), but in this thread people can discuss it.
I will use this thread to update you on progress, and occasionally post builds that the brave can test.
What works
Boot/Display ✓
Touchscreen/Buttons/S-Pen ✓
Audio ✓
Wi-Fi ✓
Bluetooth ✓
Hardware video playback ✕
Camera/Flashlight ✕
IR Blaster ✕
Installation
Flash like any other ROM. Wipe data. If you need to know more, this ROM isn't for you.
Downloads
ROM: aosp_n1awifi-ota-eng.zakooz.zip [2017-09-10]
Gapps for 8.0: open_gapps-arm-8.0-micro-20170824-UNOFFICIAL.zip
Sources
Current AOSP tag: android-8.0.0_r3
https://github.com/zakooz/android_kernel_samsung_exynos5420/tree/ao_a3
Thanks
Exynos5420 dev team ( @deadman96385 @thompatry @ZakooZ @Orion116 @joshndroid @Andmoreagain @thermskin
@tincho5588 )
@AdrianDC, @forkbomb444 - For their work on early 8.0 bringup, including work on linux 3.4
@ShevT - For his work on the P601 (huge contributor to our current device tree)
@Raymanfx - First to bring CM to this device
XDA:DevDB Information
[ROM][P600][8.0.0] [Early Development] Android AOSP 8.0.0 - n1awifi , ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ZakooZ, Exynos 5420 team
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LL Bootloader
Based On: AOSP
Version Information
Status: Testing
Created 2017-09-06
Last Updated 2017-09-10
You may post, I don't mind
Thanks for u hard work
Sent from my SM-G900F using XDA-Developers Legacy app
Thank you for your hard work. I don't care about the camera or IR blaster so I'll try using this as my daily. Again thank you!
Hello and congrats for bringing us the latest Android version. No hardware video playback means no video cant be played right now?
ss please
papatasos91 said:
Hello and congrats for bringing us the latest Android version. No hardware video playback means no video cant be played right now?
Click to expand...
Click to collapse
Correct, video right now will "load" endlessly
You can fall-back to software decoding either explicitly through an app that allows for that or by deleting these lines in /system/etc/media_codecs.xml
Am hoping to see an update soon but I am checking it out, awesome, just a few bugs that need to be cleaned up. I understand that though
Progress for 07-09-2017
Graphics allocator fixups:
* Fixed issue where the recents menu wouldn't show previews for the apps
* Fixed issue where the system wouldn't allow taking screenshots
Surfaceflinger "GPU-to-CPU" fixups:
* Fixed screen artifacts when taking screenshots
* Fixed screen artifacts when rotating screen
Not uploading build for today...
Progress for 09-09-2017
* Fixed issue which caused boot to hang for 30 seconds without doing anything (fixed all boot crashes)
* Fixed GPS
* Fixed screen artifacts in recent app switcher (fixed all screen artifacts)
* Allow the system to fall back to software video decoding (good for watching 720p, not 1080p, video)
ZakooZ said:
* Fixed issue which caused boot to hang for 30 seconds without doing anything (fixed all boot crashes)
* Fixed GPS
* Fixed screen artifacts in recent app switcher (fixed all screen artifacts)
* Allow the system to fall back to software video decoding (good for watching 720p, not 1080p, video)
Click to expand...
Click to collapse
Awesome! So glad to hear this! was wondering if I could message you personally? is that okay?
I gave this one a try on my spare tab. Which was running full AICwith no probs. I flashed the new ROM with a full wipe and format. It loaded and sorta ran...aside from the fact that the native keyboard kept crashing and would not allow any numerical input before doing so. Made it hard to see much more of the system. I'm guessing that it is supposed to play nice with Magisk.
Will keep trying the installs as they come... ;-DeanoD
New build with the latest fixes uploaded...
DeanoD said:
I gave this one a try on my spare tab. Which was running full AICwith no probs. I flashed the new ROM with a full wipe and format. It loaded and sorta ran...aside from the fact that the native keyboard kept crashing and would not allow any numerical input before doing so. Made it hard to see much more of the system. I'm guessing that it is supposed to play nice with Magisk.
Will keep trying the installs as they come... ;-DeanoD
Click to expand...
Click to collapse
I've noticed the keyboard crashes when clicking the "abc/123" button, as far as I know that is a google problem they'll fix soon... You can long press qwertyuiop to get numbers to finish the setup wizard and then install another keyboard on the store...
ZakooZ said:
New build with the latest fixes uploaded...
I've noticed the keyboard crashes when clicking the "abc/123" button, as far as I know that is a google problem they'll fix soon... You can long press qwertyuiop to get numbers to finish the setup wizard and then install another keyboard on the store...
Click to expand...
Click to collapse
I have a great keyboard app that I keep in .apk just in case. Sorry, but you lost me on the "qwertyuiop" reference.... will try again later... ;-DeanoD
DeanoD said:
I have a great keyboard app that I keep in .apk just in case. Sorry, but you lost me on the "qwertyuiop" reference.... will try again later... ;-DeanoD
Click to expand...
Click to collapse
In the default keyboard, if you long press Q you write a 1, W you get a 2, and so on for all decimals
Tkz for the rom work great so far. Videos playing ok with AC3 player. New test browser but deliver what is needed.
Rooting is on plans?
Sent from my MHA-L09 using Tapatalk
:good: Great
So nice to see the note 10 2014 still get this nice support. Thanks dude!
Keyboard fix...
I got this up and running and installed Hacker's Keyboard (my go to kb) and it works fine. A few settings are still "touchy" and there is a screen lag with input.
But, it is a GREAT start. Keep up the great work. ;-DeanoD
Testing...testing 1 2 3....
I usually like to test a new ROM and beat the crap out of it by just digging around to see what happens. I've found one of the best ways to determine how responsive the system is by running a standard solitaire app. With this build being so new and raw at this point, I'm being a bit more gentle with it.
Had my first freeze and lock-up already. Just wondering if it would be of any help if I were to post the saved post crash log files, and would I be sble to upload them here? But the pen input has something to do with the crashes just like it still does with the AICP Nougat ROM. Hope I can be of some small help. ;-DeanoD
Related
http://forum.xda-developers.com/showthread.php?t=1708012
i tested this on my ATT Note running ICS objection..so far works perfectly!!!!:laugh::laugh::laugh:
hope this hasnt been posted yet!!!!
Whoa whoa whoa!!! This is not my work.. all thanks go to original postcard.. I just thought I would share with the note community.. but yes awesome job to the dev!!!! I've been waiting for this!!
elnoxvie said:
Hi Guys,
I would like to present you smart stay with functionality similar to S3 Smart Stay. Currently this will be in beta and i am looking for beta tester for this app.
Requirements:
- Own a S2 or other phones with front camera.
- Preferably owning other phones with front camera.
- Willing to report back the status and offer improvements.
Disclaimer:
- I am not responsible for any damage done to your phone, yourself or anyone else. ^^
Usage:
- always keep your camera facing you and stay at least a Distance away for the camera to see you.
FAQ.
what is Smart Stay / Active Stay ?
Smart Stay keeps the screen turned on till the user is viewing it. The front camera uses the eye tracking technology to save the power.
Why is the screen off when i am in front of the phone?
Camera requires a distance to capture your pretty face. Maintain ada distance for it to work properly.
When will you release the beta?
15th june.
Beta Starts: 15th June
Beta END: 29th June
What can i expect at the end of beta?
Both the lite and Pro version will be available.
Will it consume lots of Resources?
Any app runs in background will but so little you wont notice.
BEFORE YOU DOWNLOAD THE APP, PLEASE READ:
* The beta app will come with a limited functionality and should be regarded as limited time beta trial.
* This app is by no means related to SAMSUNG, it's a private project
* At the end of the beta testing, Lite version will be provided and discount will be given for those who have provided a feedback on this page. (Good or bad)
DEVICES THAT WORKS:
SGS2: CM9 4.0.4 latest nightly, MIUI, AOKP.
MOTOROLA XOOM: HONEY COMB
Xperia: XPERIA S.
HTC: HTC EVO, ONE X, Sensation
SAMSUNG: galaxy tab 7.7, SGS2, N7000, SGS 3(AOKP), Samsung Galaxy W
MOTOROLA: Motorola Atrix
DEVICES THAT DONT WORK:
HTC ONE X: Seems to be working but having a mixed result.
GALAXY NEXUS: Not working but need more testers
GALAXY S I900: not working, unknown requires logs.
MOTOROLA RAZR: seems to not working for now.
V1.0.3 SOUND FIX: http://www.mediafire.com/download.php?u1n3umbtk7sei81
V1.0.3: http://www.mediafire.com/download.php?64vr472qu1phuzq
* Improve detection (using s3 flows)
* Remove Delay-Off
* Debug mode will save pictures (only those failed to detect) in SmartStay folder under sdcard
* Please dont turn them on unless necessary *
V1.0.2: http://www.mediafire.com/?9lvrmd9tm7laz1v
* Fixes for Video lag during camera shutter. This requires you to set the video app in the exception list
* Low light detection improvement.
* Adding delay off
* improved detection quality.
* Simple UI.
Please remember to turn off and on the screen again for the changes to take place.
V1.0.1: http://www.mediafire.com/download.php?abmk4tt9cf7evn2
* Change logs:
- Possible fix for Galaxy Nexus, HTC One x and I9100
- Remove polling. Now, camera only works when screen about to turn off. Keep your camera utilization low. Hence saving battery. This requires you to turn it on manually via Accessibility setting. on and off your screen to refresh changes and you are ready to go.
- Instead of removing notification, i will put it as optional.
- Some interface cleaning.
V.1.0.0: http://www.mediafire.com/download.php?abmk4tt9cf7evn2
- Limited Time Beta released
NOTES: The app will auto lock down on 29th june 2012 and
there may be plenty of bugs still. Please check for the lite version at the end of beta.
To report issues: please name the device and ROM also set the debug on.
You can also follow the latest news of the app on Facebook:
https://www.facebook.com/SmartActiveStay
How do you know it works? A member, Naor Alchsh made a video on this.
http://www.youtube.com/watch?v=J9q6-GfxKgE
Click to expand...
Click to collapse
only heard briefly about this
but "Smart Stay keeps the screen turned on till the user is viewing it." is that correct? means will turn off when i am viewing it?
if not, will it turn on if i get close to it? or still gotta use power button?
AT&T Samsung Galaxy Note Stock Gingerbread
It works perfectly on my galaxy note using stock rom. Only Problem is the SHUTTER SOUND. I tried to turn on the option for shutter sound. It works, but my only concern is it works by changing profile from regular to silent every 8-9 seconds. I wish there was some other kind of fix to it rather than changing profiles.
Anyhow, it is a great app and I love it so far. Great work.
SayWhat10 said:
only heard briefly about this
but "Smart Stay keeps the screen turned on till the user is viewing it." is that correct? means will turn off when i am viewing it?
if not, will it turn on if i get close to it? or still gotta use power button?
Click to expand...
Click to collapse
Exactly opposite it keeps the screen on while you are viewing
Sent from my SAMSUNG-SGH-I717 using xda premium
Now that I think about it - there are a couple issues with the app.
1.) Called the same as Samsung's. I can see them having an issue with that.
2.) He's going to charge for the premium app - but I'm sure someone can/will port the S3 Smart Stay apk over. So it'll all depend on how much you get with that premium app..
Still a good effort though.
i have a xperia s and it says no frontface camera detected
AOKP (Android Open Kang Project) is a free, community built distribution of Android 4.1 (JB)
This is an Unofficial release.
AOKP Homepage
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation:
install kernel
full wipe
flash rom
flash gapps
reboot into rom
ALWAYS flash the boot.img from the zip
If you have already flashed my CM10 kernel you dont
need to do it. The kernel is compatible
Kernel Download
JB gapps download(20121011)
2012/12/31
This contains BLADE 201212301352 kernel
http://goo.im/devs/maxwen/AOKP-enrc2b/AOKP-20121231.zip
Changelog:
-fixed wifi direct - thanks to atheist93 for testing - MUST use new kernel in zip!
-added hardware key mapping from CM
2012/12/28
This contains BLADE 201212271409 kernel
http://goo.im/devs/maxwen/AOKP-enrc2b/AOKP-20121228.zip
Changelog:
-fixed USB OTG storage handling
-updated to latest AOKP sources
2012/12/20
This contains BLADE 201212180032 kernel
http://goo.im/devs/maxwen/AOKP-enrc2b/AOKP-20121220.zip
Changelog:
-NFC fixed
-Music app added
-CMFileManager app added
-Video recording fixed
-updated to latest AOKP sources
2012/12/17
This contains BLADE 201212180032 kernel
http://goo.im/devs/maxwen/AOKP-enrc2b/AOKP-20121217.zip
Changelog:
-fixed Torch
-added goo.im app support - install app and you will be notified on new
builds and can download them
-complete Bluetooth support - MUST use the kernel in the ROM or 201212180032
-bugfixes
-updated to latest AOKP source
2012/12/12
This contains BLADE 201212122240 kernel
http://goo.im/devs/maxwen/AOKP-enrc2b/AOKP-20121212.zip
Thanks to Lloir for getting all of this started and "pulling" me to the HOX+
Reserved
oh god no
maxwen said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
your header has a syntax error, good luck compiling with that. =P
nice work will try .Thanks
Yep ! I really missed the AOKP since my old HOX.
Looking forward on this one
Thank you
Lloir said:
oh god no
Click to expand...
Click to collapse
Why no ?
Just flashed it & it's working great. Only thing i noticed is that it was a bit choppy the first minutes but i always deactivate animations and also i raised the max clock up to 1700 (it was at 1300??). Now it's awesome. I used the boot.img which is in the zip. Thanks maxwen and Lloir :thumbup:
Sent from my HTC One X+ using xda app-developers app
[email protected] said:
Why no ?
Click to expand...
Click to collapse
Don't worry it's just banter
Sent from my HTC One X+ using Tapatalk 2
Thread cleaned
I did a little cleaning.
@ the guy who started this all and ppl that have an attitude like him:
When do you people understand that these devs owe you NOTHING, ZIP, NADA, RIEN, ZERO, NIENTE, NICHTS in whatever language you want to hear it. They develop what they want, when they want. If you don't have the right phone for the rom, your problem. This is called xda-developers forum not *****ing users forum.
So to come here and complain on a rom devs thread about the lack of roms for your phone is not only off topic (and alone for that a violation of xda rules) but also an unfriendly act against that developer.
We will not tolerate that in the future.
Way to blow that all out of the water...I respect u all chill
Sent with my fast aZZ [email protected] Android.....hox+ is waiting rooted for none stock roms
s3nsation said:
and also i raised the max clock up to 1700 (it was at 1300??)
Click to expand...
Click to collapse
That is actually "expected" by default
Since I use the "staging" cpu frequency "designed" from nik3r
So CPU0 is limited to 1.3 and CPU1-3 are set to stepwise
increased values up to 1.6
I didnt see a effect on performance so far on the long "run"
(just better battery )
but you are maybe right that after a reboot or initial flash
there are maybe some effects on performance since lots
of things are done there
maxwen said:
That is actually "expected" by default
Since I use the "staging" cpu frequency "designed" from nik3r
So CPU0 is limited to 1.3 and CPU1-3 are set to stepwise
increased values up to 1.6
I didnt see a effect on performance so far on the long "run"
(just better battery )
but you are maybe right that after a reboot or initial flash
there are maybe some effects on performance since lots
of things are done there
Click to expand...
Click to collapse
Ok, so it should be fine when I leave it (just untick the "Set on Boot" right?) ? Good.
Hell yeah! Unicorn porn!
Just FYI I did some benchmarking to compare the "staging" CPU frequencies with full 204-1700MHz, the difference was less than 7% on CPU and 2% on GPU which more then justifies the increase in battery life and decrease in temperatures
So the choppiness you experienced was probably due to media scanner mapping your music or some similar one-time task.
And I can't stress enough: don't use SetCPU or similar on One X+. They are not designed for tegra and do things wrong by only setting up the active cores. Most of the time you only have one core active, so the others are not set and that results in very unpredictable behaviour.
nik3r said:
Hell yeah! Unicorn porn!
Just FYI I did some benchmarking to compare the "staging" CPU frequencies with full 204-1700MHz, the difference was less than 7% on CPU and 2% on GPU which more then justifies the increase in battery life and decrease in temperatures
So the choppiness you experienced was probably due to media scanner mapping your music or some similar one-time task.
And I can't stress enough: don't use SetCPU or similar on One X+. They are not designed for tegra and do things wrong by only setting up the active cores. Most of the time you only have one core active, so the others are not set and that results in very unpredictable behaviour.
Click to expand...
Click to collapse
Ok, thanks for that. I wont use SetCPU or similar amymore :thumbup:
Sent from my HTC One X+ using xda app-developers app
Installed & running fine so far
Only minor thing I've noticed is the flashlight toggle doesn't switch it on. Tried with Notification Toggles + TeslaLED as well with no luck either.
Other than that it's working well :thumbup:
I do have a large number of Google Maps wakeups showing in BetterBatteryStats alarms, but that could be my fault so I'll keep my eye on it.
Sent from my HTC One X+ using xda premium
I can confirm nonworking flaslight, but it was the only problem i met, rest was perfect...
Wlk said:
I can confirm nonworking flaslight, but it was the only problem i met, rest was perfect...
Click to expand...
Click to collapse
ok thanks to both of you - will take a look
EDIT: fixed by using the Torch app from CM10
Will be in next build
Working great on my One X+, had some problems (a lot) with the usb debug connection with the sense roms, all solved with this excellent rom!
OP updated for new build 20121217
Changelog:
-fixed Torch
-added GooManager support - install GooManager app and you will be notified on new builds and can download them from now on
-complete Bluetooth support - MUST use the kernel in the ROM or 201212180032
-bugfixes
-updated to latest AOKP source
Hey guys, sad announcement unfortunately.
I knew it was coming soon, since they were actively blocking my mods. I just received a cease and desist letter from Snapchat's lawyers for infringement of their intellectual property. And they're right, I am infringing their intellectual property. I won't be taking any further risks and will comply with their requirements to settle. I have and am going to remove everything, including SnapMod, Keepchat and Snapshare.
It's been a fun ride. I really loved developing it and really improved my skills. But I knew it had to stop some time. I understand they're not happy with it and there's no other option than to honour their requests. I'm going to think of something else to develop, of course it'll be open source. Something like an app (don't know what yet) or rom development for example. New challenges, new things to learn.
I'm going to remove everything from AndroidFileHost and the Xposed repository, ask the mods to close this thread and remove it after a few days, when most of you have had the chance to read this message.
I'm really sorry guys, I hope you understand I have to quit. I do understand them. Thanks for being such a loyal community.
P1nGu1n
XDA:DevDB Information
Snapshare, Xposed for all devices (see above for details)
Contributors
P1nGu1n_, amcgavin and stammler
Xposed Package Name: com.p1ngu1n.snapshare
Version Information
Status: Stable
Current Stable Version: v2.5.1
Stable Release Date: 2015-01-03
Created 2014-07-14
Last Updated 2015-02-10
Changelog
Changelog
Updates can be downloaded from Xposed Installer.
Note: uninstall any version created by stammler or amcgavin, package name has changed!
v2.5.0 - 2015-01-03
Fixed sharing video not working (caused by a library not being added to the APK while compiling, reported by @ALI 9)
Unlimited captions: added ability to insert new lines by pressing enter
v2.5.0 - 2014-12-31
Unlimited captions! It's turned off by default, enable them in Snapshare settings. They aren't just for shared snaps, they work for every send snap!
v2.4.2 - 2014-11-15
Fix rare bug for not taking the rotation matrix into account when an .mp4 already contained one causing wrong rotation
Improvements in image rotation in specific cases
Small internal improvements
v2.4.1 - 2014-10-12
Fixed sharing not always working the first time
Support for the latest betas (v5.0.36.0+)
v2.4.0 - 2014-09-01
Take the Exif-data's orientation flag into account
Many internal changes and improvements (see GitHub for every change)
v2.3.0 - 2014-08-21
Video rotation: rotate videos based on the resolution
Renamed 'Image rotation mode' to 'Media rotation mode', because of the added video rotation functionality
A dialog is shown when this module isn't enabled in Xposed installer
Donate and Support button added to the About section
Internal improvements
v2.2.0 - 2014-07-29
Added support for Snapchat v5.0.32.1
Snapchat now opens in a new task when sharing, instead of in the app you were sharing from
Added a warning when a shared video is over 2.5 MB, because this maximum supported by Snapchat
Huge internal changes and improvements
v2.1.0 - 2014-07-15
Added support for a different sharing format (mostly used by file managers)
v2.0.0 - 2014-07-15
Added support for the latest version: v5.0.23.0 to 5.0.27.3 (no more drawing issues)
Added option to hide the icon from the launcher
Added option to disable debugging
Added option to choose your rotation mode (CW, CCW or none)
New icon
Code cleanup and refactoring
Previous versions released by stammler and amcgavin:
Code:
1.6.6a
-- Added compatibility for snapchat 5.0.9.1
1.6.6
-- Added compatibility for snapchat 5.0.2 Please check here for details regarding videos
1.6.5
-- Added compatibility for snapchat 4.1.12
1.6.3
-- Added compatibility for snapchat 4.1.10
1.6.2
-- Fixed another bug that corrupted original videos, added GB compatibility - use at own risk!
1.6.1
-- Fixed a bug that corrupted original videos
1.6
-- Added preferences. You can now choose if an image rotates, and whether it will crop or scale.
1.5.2
-- Fixed a bug which didn't attempt to try to work for newer versions.
1.5.1
-- Support added for new beta versions.
1.4
-- Functionality is now the same as it were for previous versions.
1.3
-- Fixed to work for newer versions of snapchat. (barely)
1.2
-- Proper handling of video deletion.
1.1a
-- Fixed version to work with newest Snapchat version 3.0.4
1.1
-- Support for sharing videos added.
So far only Portrait videos are supported, as Landscape videos are shown scaled down in Portrait mode in the upper half of the screen.
Also, if the video is too large, which can happen quickly if recorded with an external app, Snapchat will refuse to send the video. I actually don't even now if you can share any other videos than the ones originally created with Snapchat and saved before sending. Or videos saved by the Keepchat mod.
1.0
-- First working release. Only image sharing supported.
Reserved
Works perfectly! THANK YOU!
Works perfectly on Galaxy S4 - Android 4.4.2 Stock
working on latest version
thanx !
Working great on C-RoM 6.6 (Android 4.4.2) d2tmo, thanks! Also wanted to say I like the new icon. :good:
THANK YOU SO MUCH!!!! Been waiting a long time for this
Nice work !
Sent from my SM-G900F using XDA Premium 4 mobile app
Thank you thank you thank you! Especially love the option to choose my rotation direction!
2.0.0 released
This is the same as the last beta as no problems were reported.
The update can be downloaded from Xposed Installer.
Changelog:
Added support for the latest version: v5.0.23.0 to 5.0.27.3 (no more drawing issues)
Added option to hide the icon from the launcher
Added option to disable debugging
Added option to choose your rotation mode (CW, CCW or none)
New icon
Code cleanup and refactoring
Please report what you think about this module and what improvements you would like to see.
Everyone thanks for the feedback you gave!
SportingChap said:
Working great on C-RoM 6.6 (Android 4.4.2) d2tmo, thanks! Also wanted to say I like the new icon. :good:
Click to expand...
Click to collapse
Thank you, I think it fits the application better
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded. I've tried to disable all other modules in xposed but it doesn't work.
Device is Nexus 4, android 4.4.4
ricardoman said:
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded. I've tried to disable all other modules in xposed but it doesn't work.
Device is Nexus 4, android 4.4.4
Click to expand...
Click to collapse
Three questions:
Does it help when you try to share it the second time?
Using Snapshare v2.0.0 stable I assume?
Which Snapchat version are you using?
P1nGu1n_ said:
Three questions:
Does it help when you try to share it the second time?
Using Snapshare v2.0.0 stable I assume?
Which Snapchat version are you using?
Click to expand...
Click to collapse
I've tried a few more times and it works now.
Yes I'm using snapshare 2.0.0 and the snap chat version is 5.0.27.3
ricardoman said:
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded.
Click to expand...
Click to collapse
Mine didn't actually load the image the first time. I figured it was because I hadn't opened Snapchat in a long while (i.e. wasn't running in the background). After I backed out and re-shared the image to Snapshare a second time, it worked perfectly.
Maybe that counts as a bug. Whoops...
Edit: Duplicated in both the beta and the new 2.0 stable, Snapchat 5.0.27.3.
ricardoman said:
Um...I'm still having issues[emoji24], snapchat starts the camera but no image is loaded. I've tried to disable all other modules in xposed but it doesn't work.
Device is Nexus 4, android 4.4.4
Click to expand...
Click to collapse
Same here, I tried backing out and sharing again 3-4 times but it just loads the camera. Tried different photos and same thing :/
I am not able to share videos.
Sprint Note 3
Sent from my SM-N900P using XDA Free mobile app
alvinpck said:
I am not able to share videos.
Sprint Note 3
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
yup can confirm but my logcat doesn't want to launch so i can't log
I'm not able to share an image either. I just get the camera. Latest stable version of snapchat and module.
tillward said:
I'm not able to share an image either. I just get the camera. Latest stable version of snapchat and module.
Click to expand...
Click to collapse
geoff5093 said:
Same here, I tried backing out and sharing again 3-4 times but it just loads the camera. Tried different photos and same thing :/
Click to expand...
Click to collapse
SportingChap said:
Mine didn't actually load the image the first time. I figured it was because I hadn't opened Snapchat in a long while (i.e. wasn't running in the background). After I backed out and re-shared the image to Snapshare a second time, it worked perfectly.
Maybe that counts as a bug. Whoops...
Edit: Duplicated in both the beta and the new 2.0 stable, Snapchat 5.0.27.3.
Click to expand...
Click to collapse
I have it too, I'll look into it, but it's strange. I thought it did occur in previous versions by amcgavin too.
It occurs when Snapchat hasn't been opened (in a while), however the second time I share it always works.
alvinpck said:
I am not able to share videos.
Click to expand...
Click to collapse
keyra74 said:
yup can confirm but my logcat doesn't want to launch so i can't log
Click to expand...
Click to collapse
I found out that for example file managers share videos in a different manner. I added support for that, I hope that solves your problem. That version will be released in several minutes. Please test it and report back.
If it doesn't solve your problem, please enable debugging in settings and share your Xposed Log with me.
What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog @dhiru1602 for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
NamelessROM Website / Forum
Google + Community
JIRA Bug Report
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
ROM
Final Build
Gapps (Banks CORE Gapps recommended)
Banks Gapps
Source
NamelessROM Source
Click to expand...
Click to collapse
Features
[*] Fully working HWComposer
[*] Optimized Gralloc with less screen tearing
[*] Performance Improvements
[*] More opensource libraries (camera, fimc, fimg, hwconverter, etc)
Screenshots
[*] https://plus.google.com/photos/+AlexanderMartinz/albums/6024840900241861201
First comment, great
Sent from my GT-I9300 using xda app-developers app
Thanks for supporting the i9300! @dhiru1602 are you the device maintainer?
The new improvements on the hardware composer are included on the latest nightlies, right? Are there any noticeable differences on the system's smoothness?
very good rom
Performance is great, if the support for exynos4 just started and this is the result, then i'm really curious what will happen in the coming weeks.
Sent from my GT-I9300 using XDA Premium 4 mobile app
notification background can be changed to any custom background??? cause this black background is really boring,i remember cm7 rom had that and since that i never found a rom with that option.after 1 year i still see same black background with same options,like,to change battery,clock and signal icons.running cm11 atm and there are some themes that changes notification background but i cant have my own background,i feel like in jail with not much options available.if there is any mod for that,please give me a link.will still try that rom cause im curious.Thanks
Does this ROM have that HWComposer fixed ?
I can confirm yes some graphical glitches are gone , but 3D performance is not good at all ,stutters and not smooth at all
Installed the ROM... 2 hours and no issues found... Will test further and report if any issues...
Thanks dhiru
Sent from my GT-I9300 using XDA Free mobile app
Does this ROM have Halo or Hover ?
I must say that,rom is really good,really really good also found that notification background can be changed which is super awesome.found no problems on that rom,works like a charm i tested all.the only thing that bothers me is that keyboard,i must always switch if i want put numbers and switch again back for letters.if you could managed to put s5 keyboard would be crazy awesome cause this keyboard to me is boring and kinda primitive.i will stick on that rom and thank you for your hard work for us.you did really good
dnbxvrfx said:
I must say that,rom is really good,really really good also found that notification background can be changed which is super awesome.found no problems on that rom,works like a charm i tested all.the only thing that bothers me is that keyboard,i must always switch if i want put numbers and switch again back for letters.if you could managed to put s5 keyboard would be crazy awesome cause this keyboard to me is boring and kinda primitive.i will stick on that rom and thank you for your hard work for us.you did really good
Click to expand...
Click to collapse
Why don't you try this...
http://forum.xda-developers.com/showthread.php?p=53098268
Sent from my GT-I9300 using XDA Premium 4 mobile app
Nice Rom but is it possible to flash a custom kernel?
Gesendet von meinem GT-I9300 mit Tapatalk
@dhiru1602
Was wondering if you could include the OmniROM circle w/ percentage battery icon instead of the CM11 circle w/ battery icon.
The OmniROM battery icon is less conjusted than the CM11 one of the same type and is easily readable.
Can I also ask if the following issue has been fixed in this ROM:
Low volume level when recording voice / video?
Is this the only issue that hasn't been fixed as yet in OmniROM and it's been really frustrating getting the devs to look into it and getting it fixed.
Can you install the Option "Move to EXTSD Card"?
Thank you so much,keyboard works and looks awesome ty again
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
hemal_4404 said:
Why don't you try this...
http://forum.xda-developers.com/showthread.php?p=53098268
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you so much,keyboard works and look awesome:good:
@dhiru1602 sorry for the noob question. Had you look at this?
http://review.cyanogenmod.org/#/c/69221/
Some suggestions:
- Black edition (white is always so bright in the evening (and my wife complains about it )
- Extra menu options tweak when long pressing power button: Screenshot and Data ON/OFF (i use those alot)
- Under Device Control, is there another way to save settings and tick what has to be kept after reboot?
- Possibility to easily overclock with MAX CPU to 1704MHz with a slider (as on Boeffla kernel)
- CPU Governor: plz add: zzmoove with all profiles
* standard: this is the governors standard stock configuration as it comes out of the box
* tunable: this allows you to set each and every parameter of the governor as you like it (for experts, donation app only)
* optimal: profile created by user ZaneZam to have a slightly tuned governor for nice performance and good battery life
* battery: profile created by user ZaneZam to have strong battery savings (expect some lags however)
* battery yank: profile created by user Yank555 to have strong battery savings (less lags than profile before)
* battery extreme yank: profile created by user Yank555 to have extreme battery savings
* performance: profile created by user ZaneZam with focus on very good performance and less battery life
* insane: profile created by user ZaneZam with focus on pure performance
-*- I suppose most current custom kernels (Boeffla, yank, Arter, etc...) will not work descent on this rom
So is the camera here fully fixed?
And what about the low voice in recordings?
Thanks
OmniROM for T900 Only
installation:
install custom recovery TWRP: http://forum.xda-developers.com/showthread.php?t=2679825
install omnirom with recovery
install gapps (optional): http://forum.xda-developers.com/showthread.php?t=2397942
for root flash zip file with recovery: http://download.chainfire.eu/589/SuperSU/
Changelog:
R2:
-sensors fixed
-improve overal stability
-bug fixes
not working:
camera
buttons backlight
download links:
R2 https://yadi.sk/d/ACdFgx9zcaGfz
XDA:DevDB Information
OmniROM, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
bonuzzz, Valera1978, arcadia2uk
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2014-11-05
Created 2014-11-05
Last Updated 2014-11-08
Reserved
Latest update: 11082014 2.30pm EST
Thank you bonuzzz and Valera1978. This OmniROM directly built from source is out of the box the smoothest and reactive ROM I've seen on the T-900, and it's also fully Open Source AOSP. I have been fortunate to run this version in alpha and beta over the past 4 or 5 days and I have not seen any extraordinary issues with the release., on the contrary it's the most reactive ROM currently existing for the T-900.
Note for v.2 - Be very patient in flashing v2, from that system format starts in TWRP until extraction kicks in there's currently a delay of up to 3 minutes
Just as under the SM-T900 cm11 tread, I have performed some functionality testing of the device and some extra features, they are shown below as working, not working or not tested. The functionality grid was developed based on weaknesses in earlier AOSP builds and ports for the large format Samsung Tab/Note Pro family:
- mtp - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/ activated. Check mark USB debugging notify.
- adb
- External SD - working out of the box
- Ext4 SD card mounting on external SD card - Unfortunately, I don't have a free SD Card to test with, if someone is interested in performing the test and report back it would be great, but theoretically it should work
- USB OTG including USB storage
- Off-mode charging
- Encryption - failed restoration of encrypted backup data in TWRP 2.8.1.1, but this must be a TWRP issue - Encryption process in ROM takes about an hour to perform, if someone is interested in performing the test and report back it would be great, but theoretically it should work
-----------------------------------------
- Lid sensor
- IR blaster - I've used IR2.0
- OC settings - located in Settings/Performance/ if you swipe right between the grids a"power menu" is shown where a multitude of performance settings and information is available, most of them currently not used.
- Advanced reboot - to activate go to Settings/About tablet/ and tap 8 times on Build number - The menu will now have Settings/{ } Developer options/. Check mark Advanced reboot.
- Screen Rotation only seem to react if the app has a default setting. You can use the Set Orientation, or the Ultimate Rotation Control app to pick the rotation you desire.
-----------------------------------------
- Play Store
- Google Play movies download and playback
- Google Play streaming Movies & TV
- DRM - tested with Audible, Google Books and Amazon Kindle
-----------------------------------------
- Zona
- Popcorn Time - need upgrade to latest version 2.3 beta, includes built-in VPN and Chromecast support with subtitles, earlier version timed out
- YouTube 1080p playback - 1440p will work w. v5.9.0.12, but I believe this to be a false positive
- Netflix
-----------------------------------------
- Chromecast with #MirrorEnabler hack, allowing for screen cast
- MHL connector
- Miracast
-----------------------------------------
- Capacitive lights - I assume this is the backlights for the capacitive buttons
- Capacitive keys
- Home button - correct function performed
- Brightness manual + auto
- Vibrator
-----------------------------------------
- GPS lock and voice directed navigation
- WiFi both 2.4 GHz & 5 GHz are working
- Bluetooth
- Microphone
- Audio on both speakers
- Headphones
-----------------------------------------
- Camera - in progress the camera "works", but does not allow for single shots to be taken, and crashes in video mode, but panorama shots are working
- Torch as of v2
- Camera Sensors as of v2
-----------------------------------------
- Xposed Framework and modules - need re-initialization after each boot (common to all cm ROM's)
- Superuser - installation of SuperSU from TWRP is recommended - make sure to enter into SuperSU settings and execute "Install SuperSU backup script", under the CUSTOM ROM label, before re-flashing a ROM update.
- Hangouts Dialer phone calls via Hangouts
-----------------------------------------
All fixes are in progress and will hopefully be sorted out in the new upcoming release
The following are standard limitations and options for OmniROM:
Write access to your external SD-card works out of the box, but just in case i suggest to d/l JRummy's SD KitKat Fixer
init.d support also works out of the box, otherwise d/l Uni-init by Ryuinferno.
If you think to much heat is building up use Performance/Governor set to ondemand, or conservative and I/O Schedduler to bfq, in addition to increase battery time you can set Wi-Fi/Advanced/Keep Wi-Fi on during sleep/ to Only when plugged in and make sure the Wi-Fi/Advanced/Wi-Fi optimization/ is checked and reduce Display/Sleep/ to below 1 minute. You can also use some apps to improve battery eg Easy Battery Saver, or the more sophisticated AutoCon+ Save Battery & Data and and to put hanging apps to hibernation Greenify that I believe require Xposed Installer. To improve charging time, you can use an app eg Faster Charger. Finally, I have also used PurePerformances in order to further improve the performances and VIPER4AndroidFX to allow for louder speaker sound and enhanced listening experience.
new version is released. sensors are fixed. camera is not working yet
I have read about, and been curious about, omnirom for a long time now. I love this tab smt 900 but have not had a lot of luck with development so far. I am a tinkerer, i like to flash a rom, tweak to my satisfaction and run it for a long time. I will stay here for a few days to see if it gains speed and these issues are fixed. If so, it looks like a great daily driver. Currently running the cm build that @arcadia2uk helped with. THANK YOU ALL for your efforts and contributions so people like me can have so much fun. Looking forward to it.
bonuzzz said:
new version is released. sensors are fixed. camera is not working yet
Click to expand...
Click to collapse
Be very patient in flashing v2, from that system format starts in TWRP until extraction kicks in there's currently a delay of close to 3 minutes. Also, if you plan on a dirty flash; make sure to enter into SuperSU settings and execute "Install SuperSU backup script" under the CUSTOM ROM label before flashing.
OmniROM Now Booting on Android 5.0 Lollipop!
from xda article
OmniROM has officially become the first large-scale custom ROM distribution to merge and successfully boot Android 5.0 Lollipop. The initial boot was performed with the Nexus 7-2013
More details in main Omni Lollipop thread.
Does this rom have multi window?
Quantra said:
Does this rom have multi window?
Click to expand...
Click to collapse
MultiWindow was removed from OmniROM in the spring of 2014. However, the former split view feature now exist as the Xposed module: XMultiWindow. There is also
Valera1978 said:
Additional:
Multi-Windows:
1. Install Xposed framework: download apk from http://repo.xposed.info/module/de.robv.android.xposed.installer
run apk, launch it, go to framework and press installupdate, then reboot. Alow root if ask.
2. Install XHaloFloatingWindow module: open Xposed framework, go to download section and search XHaloFloatingWindow (just type Halo), open XHaloFloatingWindow, swipe to left - and press download on latest version
3. Activate XHaloFloatingWindow module: open Xposed framework, go to Modules and check XHaloFloatingWindow, then reboot. Allow root if ask.
4. Open XHaloFloatingWindow - you can leave all by default, but:
- Popup WindowPopup Dim set to 0
- Popup Behavior - check "Force New Windows in Halo"
5. Install MultiWindow Sidebar: download apk from http://forum.xda-developers.com/showthread.php?t=2729450
6. run MultiWindow Sidebar:
- Check "Start on Boot"
- In "Select Apps" - add your apps
- In "Drag Launch Mode": select ParanoidAndroid Halo
- In "Tap Launch Mode": selecrt ParanoidAndroid Halo
then reboot and enjoy.
Click to expand...
Click to collapse
Personally, I'm using XHaloFloatingWindow together with Floatifications and it works very well in landscape mode (I have not tried in portrait).
arcadia2uk said:
MultiWindow was removed from OmniROM in the spring of 2014. However, the former split view feature now exist as the Xposed module: XMultiWindow. There is also
Personally, I'm using XHaloFloatingWindow together with Floatifications and it works very well in landscape mode (I have not tried in portrait).
Click to expand...
Click to collapse
That is the exact setup I am using on the SM T900. XHalo and Floatifications. It is close to halo on PA. I am on the cm 11 ROM but I am confident the ROM is irrelevant as to functionality.
I'm a huge fan of OmniROM and very happy to have it on my T900.
I'm shocked this project hasn't gathered more interest, CM is becoming convoluted while Omni, strictly IMHO, is generally a lighter/cleaner ROM.
bonuzzz said:
OmniROM for T900 Only
Changelog:
R2:
-sensors fixed
-improve overal stability
-bug fixes
Hello All,
I a thinking about replacing Wookie ROM with Omni ROM. Though before I do I was wondering if an R3 will be forthcoming and if so, when?
Click to expand...
Click to collapse
Tarkus56 said:
bonuzzz said:
OmniROM for T900 Only
Changelog:
R2:
-sensors fixed
-improve overal stability
-bug fixes
Hello All,
I a thinking about replacing Wookie ROM with Omni ROM. Though before I do I was wondering if an R3 will be forthcoming and if so, when?
Click to expand...
Click to collapse
Good question... There is nothing to release. Onmi L is very unstable for this tab because it doesn't have support of exynos platform. I dont have enough time and patience to port everything to omni. So I recommend to take a look to CM11.
Click to expand...
Click to collapse
bonuzzz said:
Tarkus56 said:
Good question... There is nothing to release. Onmi L is very unstable for this tab because it doesn't have support of exynos platform. I dont have enough time and patience to port everything to omni. So I recommend to take a look to CM11.
Click to expand...
Click to collapse
@bonuzzz
Man, I'm sorry to hear you say that.
I'm running Omni on my T900 and love it. Everything runs fine for me. The only problem I run into, frequently, is the sensor issue. Basically I can't get the screen-rotation working with any consistency. Every now and then I can play with display auto-rotate settings (disabling, running an app while in a certain orientation, then enabling auto-rotate again .. things like this) that will prompt a rotation. However, 95% of the time I can't get the screen to rotate.
Other than that, I have zero problems with your port to the T900. It would be great if you would stick it out, it's a great alternative to CM!
Thanks again!
RKM
Click to expand...
Click to collapse
Itchin'
I have been thinking about trying this OmniROM instead of CM12...the only thing holding me back is the lack of camera.
rkmFL said:
bonuzzz said:
@bonuzzz
Man, I'm sorry to hear you say that.
I'm running Omni on my T900 and love it. Everything runs fine for me. The only problem I run into, frequently, is the sensor issue. Basically I can't get the screen-rotation working with any consistency. Every now and then I can play with display auto-rotate settings (disabling, running an app while in a certain orientation, then enabling auto-rotate again .. things like this) that will prompt a rotation. However, 95% of the time I can't get the screen to rotate.
Other than that, I have zero problems with your port to the T900. It would be great if you would stick it out, it's a great alternative to CM!
Thanks again!
RKM
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Will give it a test run...
@bonuzzz
Man, I'm sorry to hear you say that.
I'm running Omni on my T900 and love it. Everything runs fine for me. The only problem I run into, frequently, is the sensor issue. Basically I can't get the screen-rotation working with any consistency. Every now and then I can play with display auto-rotate settings (disabling, running an app while in a certain orientation, then enabling auto-rotate again .. things like this) that will prompt a rotation. However, 95% of the time I can't get the screen to rotate.
Other than that, I have zero problems with your port to the T900. It would be great if you would stick it out, it's a great alternative to CM!
Thanks again!
RKM
That is good news. From page 1 it states backlight & camera not working. In this case, will give it a test run. Sounds like fun & thanks!:good:
P.S. Isn't the T900 the SWEETEST tablet you have ever put your hands on?!?!?
Reporting back...
Hi,
I installed OmniROM and was immediately pleased with 1 thing in particular...OmniROM's brightness level (on the brightest level), seemed to be brighter than CM12. I liked the status bar mods (network in / out counters), date / time mods but would nice to be able to adjust colors indepently and also support theming. The camera works fine. I do have issues with auto rotation and hard keys backlight don't illuminate. Other than these 2 items, the ROM boots very fast, stable & responsive. Great job & will keep an eye out for updates. I am happy to be a test / data point and will be running OmniROM as my daily driver for the time being.
Kind Regards,
Jason Vincent
Sr Integration & Validation Engineer
VoIP SME
Any reason why T320 is not have this ROM? Its Snapdragon based so I would have thought it would be easier.
The camera stopped working for me or perhaps wasn't working fully before. Any chance on an update that will fix camera?
Appreciate it...
Jessooca said:
use "Open Camera" it works great.
Click to expand...
Click to collapse
Appreciate the tip.
I actually went back to CM12 but miss a lot of things about OmniROM. I am rather surprised there are not more custom ROMs available in general for the Tab Pro 12.2" (SM-T900) [Beanstalk, Slim, PAC, etc.]. You would think there would be given the greatness of this tablet regarding size and performance. I keep patiently hoping and waiting with optimism.