My current phone is a Nexus 6P and I have been using a Spigen case + an intelliArmor tempered glass screen protector. Both products are excellent and I have been thrilled with them (and the phone), but the battery is starting to go on me so I figured it was time for a replacement. After some research I settled on the XZP (G8142).
I was able to order the Spigen case for the XZP, but intelliArmor does not make a screen shield (that I can find), so I was wondering if anyone has had any experience with Supershieldz before.
I looked at getting the Skinomi skin and just using the part for the screen along with the Spigen case, but I really prefer tempered glass.
Looking forward to my first Xperia phone!
** UPDATE **
The protector, phone, and case all came in. The Spigen case is top notch as expected, as is the phone itself.
The screen protector is also fantastic. I tried putting it on the recommended way (using the guide stickers), but I could never get the right alignment using this method. I ended up free-handing it and lining it up as best I could, and I think I got within a half millimeter or so of a perfect application (the bottom is perfect, the top speaker is slightly off but not enough to be annoying or obstruct the speaker). There were absolutely no air bubbles to smooth out, which surprised me.
GreenDev9 said:
My current phone is a Nexus 6P and I have been using a Spigen case + an intelliArmor tempered glass screen protector. Both products are excellent and I have been thrilled with them (and the phone), but the battery is starting to go on me so I figured it was time for a replacement. After some research I settled on the XZP (G8142).
I was able to order the Spigen case for the XZP, but intelliArmor does not make a screen shield (that I can find), so I was wondering if anyone has had any experience with Supershieldz before.
I looked at getting the Skinomi skin and just using the part for the screen along with the Spigen case, but I really prefer tempered glass.
Looking forward to my first Xperia phone!
** UPDATE **
The protector, phone, and case all came in. The Spigen case is top notch as expected, as is the phone itself.
The screen protector is also fantastic. I tried putting it on the recommended way (using the guide stickers), but I could never get the right alignment using this method. I ended up free-handing it and lining it up as best I could, and I think I got within a half millimeter or so of a perfect application (the bottom is perfect, the top speaker is slightly off but not enough to be annoying or obstruct the speaker). There were absolutely no air bubbles to smooth out, which surprised me.
Click to expand...
Click to collapse
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Mobfigurz said:
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Click to expand...
Click to collapse
Mine has the glue on the edges but there's no oil or anything in the middle.
It looks very similar to the Supershieldz one, might even be a rebrand. It's under the brand name "Panzer Glass".
It works pretty much flawlessly.
Xifar said:
Mine has the glue on the edges but there's no oil or anything in the middle.
It looks very similar to the Supershieldz one, might even be a rebrand. It's under the brand name "Panzer Glass".
It works pretty much flawlessly.
Click to expand...
Click to collapse
The one I purchased is very similar also, but has the cut-out where you can see the Sony 'logo'. Reviews are poor for those, everyone has observed the same issues as myself. I have purchased several other Tempered Glass Protectors, still waiting for them to arrive, different styles and brands to see which is the best fit with the best coverage. I will report back.
Mobfigurz said:
Is the adhesive just on the edges of the Tempered Glass? Is there some oil-like residue between the screen and glass?
I purchased a very similar Tempered Glass protector to the Supershieldz version and found the adhesive is just on the edges, top/bottom/left and right but the entirety of the screen, where the border is not is free to flex and obviously, with the gap that exists without adhesion has an odd oil-like residue, which many users reported.
I have had my XZP for a week now and have not even used it because I want a proper Tempered Glass protector which has received good reviews, along with a folio/wallet/flip case which has a strong latch/magnet to protect the phone overall, along with waiting for a DRM/TA fix before I stop using the Z5P and move onto my XZP.
Click to expand...
Click to collapse
I didn't actually notice if the adhesive was along the edges or the entire piece of glass, but it seemed like the whole piece had adhesive when I peeled off the protective plastic before applying.
I have been using the phone with the protector for about two weeks and here are my observations:
I have moved my thumbs with ample pressure across the face of the protector to see if the glass shifts or moves. It hasn't budged.
No oily residue or weird artifacts.
The fit is quite nice. Without a case, the edges would be noticeable, but with the Spigen case on you can hardly tell there is a screen protector.
In bright/direct sunlight or when you hold the phone in bright light just right you will see a grid of dots on the LCD screen - I don't know if this is because of the protector or the screen itself. It doesn't bother me as it is not noticeable the majority of the time.
My account is too new to link to external sites, so just search supershieldz xperia xz premium on Amazon and it should come up.
GreenDev9 said:
I didn't actually notice if the adhesive was along the edges or the entire piece of glass, but it seemed like the whole piece had adhesive when I peeled off the protective plastic before applying.
I have been using the phone with the protector for about two weeks and here are my observations:
I have moved my thumbs with ample pressure across the face of the protector to see if the glass shifts or moves. It hasn't budged.
No oily residue or weird artifacts.
The fit is quite nice. Without a case, the edges would be noticeable, but with the Spigen case on you can hardly tell there is a screen protector.
In bright/direct sunlight or when you hold the phone in bright light just right you will see a grid of dots on the LCD screen - I don't know if this is because of the protector or the screen itself. It doesn't bother me as it is not noticeable the majority of the time.
My account is too new to link to external sites, so just search supershieldz xperia xz premium on Amazon and it should come up.
Click to expand...
Click to collapse
Appreciate the feedback. I have just taken possession of a Muvit Tempered glass, it is clear without any borders but just the same as the rest. Everyone I have tried thus far has adhesive only on the edges, the larger portion of the screen is free to flex and move and due to that, requires a firmer press and in doing so, you hear a crisp packet like noise, a sort of crunching sound. Really annoying me now, but it is due to the curvature of the screen that we are seeing a lack of good quality glass protectors. For the Z5P I found P-Think on Amazon to be the best, yet to find any suitable candidates for the XZP.
I will order a double pack of Supershieldz soon.
Related
What is the best (quality and cost) tempered glass screen protector for the G3? I previously had an M8 and bought my first ever tempered glass screen protector, Zagg Glass. It was fantastic, looked and felt like there was nothing there and the application process took 20 seconds. However, I'm sure there are other ones out there that are just as good quality wise but far less expensive. Thanks.
I use this one myself and like it a lot. Nice fit, ultra thin, rounded edges, crystal clear and a 9 hardness. Very satisfied with this one.
Orzly
Just perfect
I use one by Pthink. 9H hardness, very clear, and very very smooth coating which does not leave fingerprints or oil! very satisfied with this purchase and was around $12 on amazon. I prefer this one due to the cutouts up top.
Can you please use the long thread already dedicated to this tooic instead of making a New one please...
Please search before making new threads
Sent from my LG-D851 using XDA Free mobile app
I recommend Bepak H+ have used it on my G3 and HTC M8
My nano.tr was great for about 3 days. Now its coming up in 2 places
I refuse to buy another Spigen Nano t.r after 5 of them with countless issues. Ive had them stop sticking for no reason, crack without ever dropping my phone and the list goes on.
I bought a Mime ghost glass and its a huge improvement. It also only cost 28 with free shipping from their website. Great screen protector especially compared to Spigen.
pic
fullyflaredfred said:
I use one by Pthink. 9H hardness, very clear, and very very smooth coating which does not leave fingerprints or oil! very satisfied with this purchase and was around $12 on amazon. I prefer this one due to the cutouts up top.
Click to expand...
Click to collapse
Any chance you could post a pic, I ordered one and am anxious to see what it looks like exactly.
I use zagg, and it's amazing. I also have the circle wireless case, and the front flap was not affected in any way.
I just got my pThink screen protector in today. It is a perfect fit. Couldn't be happier with the quality and price. I definitely recommend compared to the ones with the big cutout up top...this just has one for the speaker grill and ambient light sensors.
are there any tempered glass screen protector that does not leave any fingerprint behind?
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
If there were I would assume the same layer/technique would be applied on the original Gorilla Glass screen as well.
Some do claim they repel finger prints, that's usually just marketing BS though
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
I've been using a Tech Armor glass screen saver for the last few days and it shows fewer fingerprints than the stock screen. It feels smoother than the regular screen which may have something to do with it. It still gets prints, just not as many and they seem to wipe off easier. Very please with it for $10.
jksigmon said:
I just got my pThink screen protector in today. It is a perfect fit. Couldn't be happier with the quality and price. I definitely recommend compared to the ones with the big cutout up top...this just has one for the speaker grill and ambient light sensors.
Click to expand...
Click to collapse
this looks like it only has a cutout for the speaker grille?
[email protected] said:
this looks like it only has a cutout for the speaker grille?
Click to expand...
Click to collapse
The cutout is for the speaker grill and the proximity sensor etc. It does not have an opening for the front facing camera. I've had it for a few days now and LOVE it. The beveled edge is super smooth on the outside edge and the cutout.
jksigmon said:
The cutout is for the speaker grill and the proximity sensor etc. It does not have an opening for the front facing camera. I've had it for a few days now and LOVE it. The beveled edge is super smooth on the outside edge and the cutout.
Click to expand...
Click to collapse
I bought this protector last night and the slim guard case the other day i think ill be good to go! ill post picutres:good:
tsktsk999 said:
are there any tempered glass screen protector that does not leave any fingerprint behind?
Click to expand...
Click to collapse
I bought the one carried in the VZW stores and it really cut down on the fingerprint / smudges - I could really tell the difference. But that protector was .4mm thickness and touch sensitivity became an issue for me. So I bought the .2mm iCarez protector. The thickness was just right, but the oleophobic properties are not as good as the VZW protector.
As always, YMMV.
Based on the reviews in this thread I ordered the pThink protector (Free Prime 2-Day shipping FTMFW).
I can't say enough good stuff about this screen protector. It is available on Amazon for around $11(with free prime shipping if you have it). There are a variety of good tempered glass screen protectors. Most of them simply notch out the top near where the speaker, light sensor and proximity sensor are located. This one has a perfectly aligned oval shaped cutout giving it a much more OEM looking appearance. Like most, the edges are pleasantly rounded.
The package is straight forward, complete with requisite chinglish on the outside. The package is generic, saying it includes a 'homer(sic) button' cover. Which doesn't make sense, and sure enough it doesn't include. Opening it up, you see all of the included materials. Nothing outstanding here other than the actual instructions seem to be in normal English! I didn't look closely but I didn't see any chinglish.
Installation is a breeze but good prep ensures success. I cleaned the screen extensively to remove all traces of oil and dust. Since I am a chemist I used chloroform to degrease the screen. I also used it to degrease my fingers (not something I recommend but it works). Once the screen was clean, I applied the tempered glass screen protector by VERY VERY VERY gently lowering it by its sides. I can't stress the very gently enough. If you do it gentle enough it will rest just above the surface and you can use your fingernail to maneuver the screen protector into perfect position. Then just touch down on the screen and watch the "bubble" of bonding spread across the screen, it just drives the air out. The rigidity of the screen protector results in a perfect bubble-free finish. I couldn't believe how easy it was. Once the screen protector was on, I wiped it down with the included microfiber cloth.
Initial impressions? Damn! It's truly crystal clear, I can't seem to find any visual distortion. Touch feels slightly changed due to the oleophobic surface but its clearly glass and feels like a touchscreen. There is ZERO effect on the touchscreen performance. Also, the oleophobic surface DRAMATICALLY reduces the amount of smudges, it doesn't prevent them but its a huge reduction. I have a few pics of the package before installation. Once I cleaned the screen, I lost my camera (my phone is the camera so I couldn't use it). The edges of the screen protector are within fractions of a mm of the display edges. This is necessary to make installation a little easier and to prevent bubbles. I truly could NOT be happier!
I'm really happy with a Bepak one. Rounded edges, smooth, and feels really great to touch. No scratches at all till now with some rough usage.
Although reading the reviews about the pThink one, I'm going to give that a try when something happens to the current Bepak one.
Before I order something random from Amazon, I thought I would ask what everyone is using and what you think of it. The only post I found in any of the other threads was someone with a tempered glass screen protector who wasn't happy with the fit.
NAR
well, I have a tempered glass screen protector on it, and I am very happy with it. It is a 100 times beter than any other plastic screenprotector, as it will not scratch easily.
not a robot said:
Before I order something random from Amazon, I thought I would ask what everyone is using and what you think of it. The only post I found in any of the other threads was someone with a tempered glass screen protector who wasn't happy with the fit.
NAR
Click to expand...
Click to collapse
Well... for a screen protector, I found this:
http://www.aliexpress.com/item/NILL...ctor-Film-For-Lenovo-K3-NOTE/32319213616.html
I gave it a chance, even thought I was like "meh, Chinese junk maybe", but today after 4 months, it looks the same! BEST screen protector I ever had.
iPaky case (Gold)
iPaky case from amazon.in
Using this, http://www.aliexpress.com/item/Free..._78_77_80,searchweb201644_0,searchweb201560_9
Fits perfectly but can be found cheaper ofc
freelancer81 said:
iPaky case from amazon.in
Click to expand...
Click to collapse
This case is good but bumper is of plastic which is delicated.
I have tried every thing out there and ended up with everything Nillkin, case and screen
I have the black/gold Ipaky case and a tempered glass screen protector. I like them both.
Does anyone know of a desktop battery charger to charge a spare battery out of the phone?
freelancer81 said:
iPaky case from amazon.in
Click to expand...
Click to collapse
I also have an iPaky case bought from ali express. (Black version in my case)
Build quality is good an the case stays higher than the screen protecting it from falls.
The back is super grippy with a nice pattern.
For a screen protector i use a tempered glass one which is stronger than a normal plastic screen protector and doesn't leave bubbles after being applied.It costs a bit more than ordinary screen protectors but you can get one for as low as 1€ from Aliexpress.
I own two cases, one is a simple one with a transparent black color while the other one has an Audi sportscar drawn on it.
So here is what I got:
Aksberry tempered glass screen protector
Pros:
good fit
Tempered glass does seem very hard
rounded edges don't catch on things (like pockets)
Cons:
seems to reduce sensitivity of touch screen
mine has a flaw that has created a bubble under it. It is on the lower edge, so it doesn't affect its operation, just an annoyance to look at.
Nillkin case
Pros:
good fit
edge extends above screen (and screen protector)
extends above buttons. This also helps prevent accidental button presses (am I the only person who thinks that power button is in exactly the wrong spot?)
Cons:
haven't noticed any
Currently using the iPaky case with the silver frame. I love it. The iPaky cases are one of the best out there. I have also a leather flip cover, it's nice but I don't use it much for whatever reason.
did anyone notice the screen protector sensor hole is on the wrong side?
left which has nothing on it, right is where the sensor is.
damn....
Hi,
My Lenovo glass had broken many times & now it gives problem of sensing. Where should I get to change the glass & how much it cost?
I use a tempered glass protector with a skin I ordered from skins4gadgets. The skin is good enough for my usage.
Hi all,
I'm looking for a good glass screen protector that covers the whole screen (usually they are ones with a black or white border), but I'm really struggling to find good makes. I tried a protector from LK, but the glass was pretty cloudy and had a 'rainbow' effect raising our from the centre of the protector, it also turned out to be a disaster to remove, with the strong adhesive leaving adhesive marks and shattered glass as I tried to remove it!
Anyone else had any experience with other protectors and could make a recommendation?
I tried the 2 from Nillkin, but only one had full coverage with black edges. The glass was fine, but the edges looked cheap and tacky.
There is a video of full screen glass on YT and the guy that posted the video has posted videos here (unofficial Huawei), but he's just a shill and has no interest in answering questions, just promoting products.
https://www.youtube.com/watch?v=BxZzXd_JG4M
I use Mofis tempered glass (full coverage). It's working like a charm.
Skickat från min VTR-L29 via Tapatalk
c411umuk said:
I tried the 2 from Nillkin, but only one had full coverage with black edges. The glass was fine, but the edges looked cheap and tacky.
There is a video of full screen glass on YT and the guy that posted the video has posted videos here (unofficial Huawei), but he's just a shill and has no interest in answering questions, just promoting products.
https://www.youtube.com/watch?v=BxZzXd_JG4M
Click to expand...
Click to collapse
He called Jozinek in this forum.
---------- Post added at 11:35 AM ---------- Previous post was at 11:27 AM ----------
A friend of mine got this brand, he got it from china, it's called called smartdevil, although it's only a OEM brand, anyway, it includes a frame for accurate placement of the protector, full coverage glass protector with about 1/2mm rim to accommodate a case, liquid filler to fill up the sids rim.
no link will be provided unless you intend to flight to china to buy it, just to let you know they are available so may be some searching you can find it online or similar item since it's only a oem product.
I also had a horrible experience with the LK screen protector. Rainbow effect in the middle and really annoying adhesive at the top and bottom. The transparent screen itself was also not very clear.
I then switched to an OMOTON brand one and it is amazing! Fingerprint and smudge resistant. Fits perfectly, full coverage across the screen. Looks sturdy. Cutouts perfect. Only downside is that it ends a bit short at the top and bottom, so still exposed there unless you use a case with a lip.
Avoid LK, and give the OMOTON one a try.
DeedsOfTheDead said:
I use Mofis tempered glass (full coverage). It's working like a charm.
Skickat från min VTR-L29 via Tapatalk
Click to expand...
Click to collapse
Do you have a link to where I can find them? Tried Amazon UK and Googling, bit couldn't find anything.
boonkoh said:
I also had a horrible experience with the LK screen protector. Rainbow effect in the middle and really annoying adhesive at the top and bottom. The transparent screen itself was also not very clear.
I then switched to an OMOTON brand one and it is amazing! Fingerprint and smudge resistant. Fits perfectly, full coverage across the screen. Looks sturdy. Cutouts perfect. Only downside is that it ends a bit short at the top and bottom, so still exposed there unless you use a case with a lip.
Avoid LK, and give the OMOTON one a try.
Click to expand...
Click to collapse
Glad I'm not the only one with a bad experience with LK. Looks like the transparent Omoton protectors that don't cover the full screen are easy enough to find, but I'm struggling to find the full coverage one where did you get yours from?
https://m.aliexpress.com/item/32803815777.html#autostay
@Ally153
Skickat från min VTR-L29 via Tapatalk
Glad I'm not the only one with a bad experience with LK. Looks like the transparent Omoton protectors that don't cover the full screen are easy enough to find, but I'm struggling to find the full coverage one where did you get yours from?
Click to expand...
Click to collapse
I got my OMOTON screen protector from Amazon (prime delivery - fulfilled by Amazon). You're right, it isn't full coverage (smaller than LK's one). But its close enough to full coverage if you have a tpu case that has a good lip.
Yesterday I got my Omoton tempered glass (Amazon.co.uk), and I am dissatisfied - the glass does not fit properly on the display (air space on both sides)...
This is Nillkin's. Similar size* but adheres perfectly (sorry for crap picture).
I also tried their 3D version (full screen) but it makes the phone look very cheap.
*Actually the Omoton looks wider.
bolek007 said:
Yesterday I got my Omoton tempered glass (Amazon.co.uk), and I am dissatisfied - the glass does not fit properly on the display (air space on both sides)...
Click to expand...
Click to collapse
My friend has the same protector and it comes with a liquid adhesive to fill the gaps.
c411umuk said:
This is Nillkin's. Similar size* but adheres perfectly (sorry for crap picture).
I also tried their 3D version (full screen) but it makes the phone look very cheap.
*Actually the Omoton looks wider.
Click to expand...
Click to collapse
What was it about the 3D version you felt looked cheap? Was it easy to remove the screen protector?
Right now I'm using the GhostShield by TechGear. They are relatively cheap and difficult to install, but after watching a video on installing them, it was a little easier. They are extremely thin - almost invisible and are self healing, but any dust caught under the protector will result in a bumpy surface. I'm also not entirely sure how great the protection is they offer. My Ringke Fusion case started lifting the to corners of the protector, but I think I stretched the protector (really easy to do with a membrane protector this thin!) slightly as I tried to get the bubbles off the surface.
Still looking for the best solution to protect my screen...
Ally153 said:
What was it about the 3D version you felt looked cheap? Was it easy to remove the screen protector?
...
Click to expand...
Click to collapse
The plastic borders. It was very easy to remove as the plastic borders don't really have much in the way of adhesive.
I will try a Cafele next, when I can be bothered to order one.
Just got both of these two delivered from www.taobao.cn
first one is a anti blue ray with installation frame for exact right positioning and liquid filler for those air gaps along the edges of the protector, the second one is a normal tempered glass protector as a two piece package with the same accessories.
kms108 said:
Just got both of these two delivered from www.taobao.cn
first one is a anti blue ray with installation frame for exact right positioning and liquid filler for those air gaps along the edges of the protector, the second one is a normal tempered glass protector as a two piece package with the same accessories.
Click to expand...
Click to collapse
Could you share full link, please? Would like to buy one for mom Thank you
I got Omoton full coverage tempered glass but i am afraid its not compatible with silicone cases? It is good screen protector but sadly not ideal for cases.
It looks like cases lift screen protector on edges slightly so air gets underneath... Any good screen protectors that are not full coverage so i can still use case?
I bought the nilkin glas but the black borders around the screen protector takes a lot of screen space, I don't recommend it!
Sent from my VTR-L29 using XDA-Developers Legacy app
Benks have a really good one, it's a full coverage with white or black boarder (adhesive covers throughout the whole glass, not just the edges), just like those on the iphone, it curves and cover the edges.
Benks have two version, KR PRO this is also full coverage, glass & plastic sided and XPro+ full glass coverage.
I am using the Benks XPro+ full glass cover and I think it's great. It's a 3D glass screen protector, covers the screen perfectly, right to the edges, with no air bubles. Also it has an oleophobic coating.
D_Grunt said:
I am using the Benks XPro+ full glass cover and I think it's great. It's a 3D glass screen protector, covers the screen perfectly, right to the edges, with no air bubles. Also it has an oleophobic coating.
Click to expand...
Click to collapse
its a good product, i just got a spare one yesterday incase I need it, slightly cheap than my first one.
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
JimBird Tempered Glass Screen Protector Front + Back + Camera Lens Protector For Galaxy S8 Plus S8+ 9H Anti-Scratch Anti-Fingerprint https://www.amazon.com/dp/B073S4YZW1/ref=cm_sw_r_cp_apa_MohHzbHWHA99A
Mr. Orange 645 said:
When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
Click to expand...
Click to collapse
I was thinking about the same thing, this post is very helpful.
Mr Orange, I am thinking on the same lines as you were. Did you end up buying the JimBird TGSP? If so, what are your opinions of it and how well did it work for you? It seems like something simple to offer, but so hard to find. Thanks!
i'm looking for a shatterproof screen protector, something like the rhino sheild but that provides full coverage for the screen or like a very good tempered glass one, i had the orzly pro-fit tempered glass but i accidentally dropped my ps4 controller on my phone and the screen protector cracked and the controller was only about 10 centimeters above my phone if anybody can please give me some suggestions i'll be very thankful.
You could comb through the seemly endless posts on tempered glass screen protectors (tgsp) and they all seem so have some issue particularly when paired with a case. Even when a case doesn't lift the protector people get dust eventually under a non-full adhesive tgsp, a visible rainbow effect, popping off after a month or so, dust collection around the sides or in the proximity sensor/microphone, the surface being an unsightly fingerprint magnet ... etc.
So far there hasn't been a hands down, works with every case winner. Here is the best YouTube reviewer for OP5 tgsp/case combos as he applies the protector then tries many different cases (maybe the same as the one you own), "BiG Unboxing".
I saw one video proclaiming the OnePlus all adhesive tgsp combined with a RhinoShield bumper case as being the perfect combo (tgsp applied with bumper case already on). The major complaint about the OnePlus tgsp is that it slightly cuts off the screen on the sides. So your question, at this time, seems to have no definitive answer. I love the RhinoShield ... except the issue with how hard its buttons are to press, as I had that issue with a Speigen case on my last phone and will not tolerate that again.
Personally I have a couple products on order which I hope will resolve my own issues (Orzly tgsp with dust under cover after 3+weeks).
Has anyone found any full coverage tempered glass? On my third Orzly that has started to come off from the sides. Looking for a better tempered glass.
i give up on tgsp for now. most of them is krapz out there. its the same old design but different branding/names. i have been using this clear screen protector and very satisfied with it.
https://detail.tmall.com/item.htm?id=557053688258&rn=607e44ac89edf2947873ba7a9c2fda2d&abbucket=0
Everything u need to know is thr. btw link is in chinese so use translator. they also have the full edges/adhesive type but i dont recommend it.