Related
They've added a section for the 8125/HTC Wizard!! FINALLY!
All they have at the moment is a swivel clip holster, but hopefully they'll have their windshield mounted cradles too, that's what i really want..
http://www.seidioonline.com/index.asp?PageAction=VIEWCATS&Category=882
sweeeet... ive been looking for one of these for forever. i hate those leather cases that add bulk to the device, this just sits snugly holding your phone or on your waist. nice that it protects the screen too, just how i wanted it.
thanks!!
One issue
Let me know if you get one. I know the Verizon version of the wizard came with a holster like this one. Problem is, whenever I took it out of the holster the clip on top brushed against the MiniSD and it popped out like toast from a toaster. Hopefully this wont happen with this one.
Phillyjaq
I have one that I posted pictures of over at howardforums.com. It works fine. I havent had the "toaster" situation happen yet.
I just purchased this case. I was looking for a case that:
- was as thin as possible because the phone is already pretty thick
- was easy to access since the OEM case is so clunky
- had a flexible belt clip, i.e., opens and swivels. I found the static clip on the OEM case difficult to attach
- protected the screen from bumps and scratches
Here are the pluses:
+ clean, simple design
+ sturdy plastic with an excellent belt clip design. The clip is large and easy to use. It's built with a sturdy metal spring and can pivot. The pivot gives a nice solid click when it moves and can be adjusted vertically, horizontally or a couple of clicks in between.
+ easy to use two-handed. The top clip is spring-loaded and very secure. I have no concern that the phone will pop out of the case.
+ reasonable price $30. I originally wanted a slip case, but some of the leather ones out there were going for $50 bucks. Ouch!
And the minuses (in order of irritation):
- not easy to use one-handed. The problem is the location of the power switch and memory card on the phone. I find it too easy to bump the power switch with the top clip while I'm loading and unloading the phone. This creates some interesting results since it's also easy to hit other buttons on the way to and from the case. Also, I've had the phone glitch because the clip hit the memory card. This is a little scary because I don't want to ruin the card or the slot hardware.
- some flashing on the mold seam on the top clip. This was solved with some sandpaper. Not a big deal, but the flashing was sharp and I kept hitting it as I loaded and unloaded the phone.
Overall, I would rate the case as pretty good but not perfect. If I was less clumsy, maybe it would be a good one-handed case, but two-handed is okay for me. The size is right and the belt clip is great.
Sorry for the potentially silly question, but this should fit the MDA right?
yes mda fits but 30$ is redicilous..wait for them to be on ebay for 4.99 plus 1 penny shipping.. just like the car chargers
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9722705394
It's not $5, but there is some savings. I believe this is direct from Seidio. I ordered it without any hesitation. I've been looking for a holster.
Geoffrey
gmaugham said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9722705394
It's not $5, but there is some savings. I believe this is direct from Seidio. I ordered it without any hesitation. I've been looking for a holster.
Geoffrey
Click to expand...
Click to collapse
Please report back how you like it, as I'm looking for a solution, too.
gmaugham said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9722705394
It's not $5, but there is some savings. I believe this is direct from Seidio. I ordered it without any hesitation. I've been looking for a holster.
Geoffrey
Click to expand...
Click to collapse
Just received mine yesterday from this eBay seller. Yes, it is the Seido brand. This clip is exactly what I was looking for. I was a little concerned about clipping in and out. I guess I missed it in one of the above posts, but the top bracket is hinged, which allows you to hold it up, place the phone in the bottom brackets and let the top bracket down to hold it in. I found it very easy to do one handed after about 5 minutes of playing with it. Very good product.....IMHO
I can't say I've yet mastered the one-handed insert and remove processes. I'm giving it a couple more days before I request a refund. Do you have any hints regarding how you manage to use this holster with just one hand? I also find the top clip regularly hits either the power button, the SD card, or both. Not an optimal design at all.
Thank you.
Geoffrey
gregski said:
gmaugham said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9722705394
It's not $5, but there is some savings. I believe this is direct from Seidio. I ordered it without any hesitation. I've been looking for a holster.
Geoffrey
Click to expand...
Click to collapse
Just received mine yesterday from this eBay seller. Yes, it is the Seido brand. This clip is exactly what I was looking for. I was a little concerned about clipping in and out. I guess I missed it in one of the above posts, but the top bracket is hinged, which allows you to hold it up, place the phone in the bottom brackets and let the top bracket down to hold it in. I found it very easy to do one handed after about 5 minutes of playing with it. Very good product.....IMHO
Click to expand...
Click to collapse
i had mine for 2 days now and LOVE it! I mastered the one hand in/out simply....
take out - i push the clip away with my index finger and use the rest of the hand to guide/retrieve the phone...
put back in - use my index finger to "hook" the clip and push it back while the rest of the hand slides the phone into the "full seated" position, then put the clip down and just run my hand along the edges fast to make sure everything i in tight....
hope this helps...
I bought the clip too, but it keeps ejecting my memory card!
one time i took it out with out looking and my memory card fell out.
luckly, nothing broke.
i'll need to redesign a few things.
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
naplesbill said:
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
Click to expand...
Click to collapse
Thanks for this review! I am looking for something less bulky than the case-mate. I'll have to check this out when I stop in my local ATT store. How much they selling them for?
I believe it was the usual rip-off price of $35. However, they give me 20% off on accessories at this store (frequent shopper there LOL). I am sure there are better deals, but I did not want to take a chance of messing up my phone before finding a case elsewhere. I paid full retail price so a few extra bones wasn't that big of a deal.
I was planning to return it, but I can't find anything similar online. If I find it online cheaper, I will buy it and return this one for sure. Either way, I am happy enough as it is.
I just bought this case today. I love it! Its like a mix between a hard case and tpu. If you had the bodyglove case on your captivate, you'll love this case. I like the look of the leather back, as I think it adds some class. This case doesn't add that much bulk either.
That was my first choice but the store rep couldn't get it to fit properly so I went with the ballistic even In this case the phone feels tiny in my Herman Munster hands after the infuse in a ballistic case I love this phone just gotta adjust to it
Sent from my SAMSUNG-SGH-I777 using xda premium
I also got this case. I like it a lot, it keeps the same of the phone without adding much bulk at all!
I got this case for my AT&T Galaxy S2 on launch day and I LOVE it. The Ballistics were just ridiculous. As far as getting the case on goes, I couldn't get it to fit at first but if you put it in bottom only, completely lip it; then top, completely lip it; then work the sides, it will always fit perfectly. Sometimes I feel like Gollum caressing my precious Ring with this baby.
Picked up this case today and absolutely love it. It doesn't add much weight to the phone and i feel it still keeps it slimness. As far as fitment goes. It does fit damn tight. I put it on the best I could at the store. I squeezed the sides to get the lip to go over but never could get the bottom corners to cover properly. Once I got home, I took it back out, then put it back on in reverse. This did the trick and it went on a lot easier.
I'm probably going to end up buying this case ASAP... I was interested in it for a while, but was afraid that it may have been too bulky.
Thanks for the feedback guys!
Sent from my SAMSUNG-SGH-I777 using xda premium
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
On another note anyone got the ivisor AG screen protector? not sure i am liking it. It seem to make my screen dim because of the non-glare, cant seem to find any good one on the net, they all seem to be for the international version. things are new so I will wait a bit.
Coldheat1906 said:
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
Click to expand...
Click to collapse
I am on a corporate account through my employer and get 15% off. I asked them about that discount on accessories and they said that it only applies to service plans. I guess I will be returning the case today after work...
jiannichan said:
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
Click to expand...
Click to collapse
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Bigdog1 said:
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
Click to expand...
Click to collapse
What problems are you having with fitment? While it does take a little bit to get it on right, it should still fit. I had problems with the bottom corners until I took it out then put in back on, starting on the opposite end.
axis01 said:
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Click to expand...
Click to collapse
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
I would love a case like this but the wife has the same phone as me. Does anyone know if it comes i white? Or am able to order a different color online?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
jiannichan said:
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
Click to expand...
Click to collapse
That one doesn't look bad. I see they made a large cut out where the power button goes. Don't really care for that big cutout but to each his own. Mine has actually become a lot easier over the last day or so. I guess the compound loosens up over time.
Just got my GS2 today and bought this case at the same time. I wanted something sleek after a Ballistic case on my Infuse and this seemed perfect.
As others have stated it's a tight fit. The sales rep couldn't get it on completely so I had to play with it myself. Another post stated putting bottom and top on first. I had better luck with the sides first. Maybe it is just loosening up after trying 2-3 times to get it on.
The volume and power buttons being covered are going to take getting used to as it takes a good press to work them.
To sum up, love the case so far. Seems to be good quality and good protection.
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
awtryau89 said:
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
Click to expand...
Click to collapse
I had to keep pressing in around the sides to get it to fit perfectly. It took an hour or so to settle in.
Sent from my SAMSUNG-SGH-I777 using xda premium
Disclaimer: I am not affiliated with Speck, Barnes & Noble, or Amazon. I do not profit, or gain anything by this recommendation. It's just a personal discovery that made me happy and thought it might be helpful to other NSTR users.
For some reason all the B&N official Nook cases are way thicker and bulkier than they need to be. Also most third-party cases I looked at were faux-leather with huge messy stitching as if they were part of a Frankenstein cosplay competition.
Being super picky about these sorts of things, I put off buying a NSTR case while obsessively trying to find one that was:
1. Slim (All these giants cases defeat the purpose of a tiny portable ereader)
2. Play-through (I can leave it on while using, ie not just a slip-cover I can lose)
3. Protective (Not soft)
Well, I've been looking high and low, reading all the Nook forums with no luck until recently when I finally found this case: (I can't post links yet, so just search on Amazon for "Nook touch fitfolio"
Speck FitFolio for Nook Simple Touch Reader.
I saw it at Target for $29.99, but bought it on Amazon for just over $21. It looks like the price fluctuates a bit (it's $24.83 right now).
I got the black one, I got my wife the teal one. It also comes in purple.
wow, the blue one is really ugly. :-D looks like a lunch box. The grey one is nice.
I am using a cover bought from B&N, it is a bit thicker and larger but at least it protects my nook well from pressure and falls. That cover above seems to slim, I don't belive your nook would survive if it falls e.g. on the corner. Mine did several times.
Can you lock the front side of the cover to the back side (while reading)?
Cases
I use the Silicone skin. It's relay nice and absorbs most of the shock of a drop.
http://www.barnesandnoble.com/p/silicone-frame-in-graphite/22315829
cceerrtt said:
I am using a cover bought from B&N, it is a bit thicker and larger but at least it protects my nook well from pressure and falls. That cover above seems to slim, I don't belive your nook would survive if it falls e.g. on the corner. Mine did several times.
Can you lock the front side of the cover to the back side (while reading)?
Click to expand...
Click to collapse
1. I've looked at each and every official B&N cases in detail and found all of them, frankly, to be really lacking in several areas. The Speck case has a much more secure attachment system as well a good shock absorption due to the material and the shape of the case. Also, as I mentioned, it is much more form fitting than any of the B&N cases.
2. Yes, you can lock the front cover to the back while reading.
I should have mine next week!
Based on your recommendation I ordered one, and I should have it next week. I will let you know how it works out.
Edit: I just exchanged my NSTR at B&N a couple of days ago as it had a cluster of stuck pixels. I had no problems, but the employee said that it could have been caused by something being pushed down on that screen at that point. This is why I decided to get a case, as I don't want it to happen again!
Musulsa said:
1. I've looked at each and every official B&N cases in detail and found all of them, frankly, to be really lacking in several areas. The Speck case has a much more secure attachment system as well a good shock absorption due to the material and the shape of the case. Also, as I mentioned, it is much more form fitting than any of the B&N cases.
2. Yes, you can lock the front cover to the back while reading.
Click to expand...
Click to collapse
jhedfors said:
Based on your recommendation I ordered one, and I should have it next week. I will let you know how it works out.
Edit: I just exchanged my NSTR at B&N a couple of days ago as it had a cluster of stuck pixels. I had no problems, but the employee said that it could have been caused by something being pushed down on that screen at that point. This is why I decided to get a case, as I don't want it to happen again!
Click to expand...
Click to collapse
Edit: I reviewed the description & it DOES say the bungee is "two-way", so I am assuming it is designed to work that way - it just seemed a bit of a tight stretch. No biggie for me, as I don't think I would be attaching it any - folded back works fine.
Just received mine today. It really has a nice feel, and I think it will protect it well. Thanks for the recommendation!
P.S. The cover DOES fold back upon itself, but I wouldn't say exactly say it "locks" (rather, I would not want to, as it would overstretch the "bungee").
EDIT: I just reviewed the specs, and it does state that the bungee is "two-way" - it just seemed a bit of a tight stretch. No biggie for me, as it works well, simply folded back, and not attached.
So the folded cover is not "fixed" in the folded position? Could you upload more photos?
Mine nook cover is magnetic and therefore folded front & back cover keeps together, moreover when bonded with magnetic clip.
I have bought aluminium case for my NST. It has 3 positions for reading. The NST clips inside so it wont fall out. It has a black padding inside and it seems to be thinner then all those folding leather ones. The disadvantage of this cover is -> when you open the cover and flip it at the back, so it flat ... it's kind of awkward to read it like that, because of the round shape. It just feels
Since this is one of my first posts in this forum, I can't put the LINK for the cover. but if you would go in UK Ebay and type in search : aluminium nook ... you should see it. it cost 12.99GBP.
But now with the "keayboard hack" ... I'm thinking about finding a way how to modify the cover for 10" tablets with keyboard so it can hold the NST. That's what kepps my mind busy at the moment.
I agree completely with the Speck case. I too do not see the need for B&N making such large covers for such a small device. The Speck cover is just barely bigger than the nook and is comfortable to hold with the cover folded back and secured. The nook snaps in and out of the cover very easily. If you fold the cover back and secure it, it stays level and has enough grip to not slide if you prop it against something to read. I would prefer a magnet or snap closure, but after several uses the bungee gets easier to fasten. Very satisfied with this cover.
I found the Specs cases at my local Target. Prices varied from $29.99 for the standard colored (blue, purple, green) cover to $34.99 for a black 'leather' version. They did not show up at the online Target.com site. Very nice. I may have to get one.
I have ordered Industriell Cover in Carbon with Lyra Light and Anti-Glare Film when bought my Nook. And right after my order came to me in B&N store appeared Silicone Covers and Stella Light. I`d rather bought them...
What I don`t like in my cover is the way Nook is mounted into it. Why not to fix the book with four of these latches. Another thing is the size, tried to find anything that adds less to the sizes of the Nook itself.
Also in this theme I saw Speck cover, if I knew of it earlier I`d mostly bought it. But now I don`t need two covers so... I use what I use...
Dagon.Alex said:
I have ordered Industriell Cover in Carbon with Lyra Light and Anti-Glare Film when bought my Nook. And right after my order came to me in B&N store appeared Silicone Covers and Stella Light. I`d rather bought them...
What I don`t like in my cover is the way Nook is mounted into it. Why not to fix the book with four of these latches. Another thing is the size, tried to find anything that adds less to the sizes of the Nook itself.
Also in this theme I saw Speck cover, if I knew of it earlier I`d mostly bought it. But now I don`t need two covers so... I use what I use...
Click to expand...
Click to collapse
I have the same case, and it's not that easy to hold. And trying to press the buttons on the left just makes the entire thing flip. Also, what changed between the Lyra Light and the Stella Light?
Have no problems holding it.
Don`t like how left buttons are pushed myself that`s on what I said about latches.
Stella looks just prettier then Lyra. Also Lyra just unbends when Nook is being shaked(while reading in bus or other transport)
cceerrtt said:
So the folded cover is not "fixed" in the folded position? Could you upload more photos?
Mine nook cover is magnetic and therefore folded front & back cover keeps together, moreover when bonded with magnetic clip.
Click to expand...
Click to collapse
I think that's the one I got: I would normally never buy a case made by the device manufacturer, but I picked this one up at Best Buy for (I think) $15: it's two stiff boards, just wider than the Nook Touch itself, with a hinge at the top, with a magnetic clasp that can also be used to hold the front and back cover together as a stand when they're folded backward. The whole thing is light, compact, and protective--and not any harder to read in the case than out of it (plus, if you need a reading light, it's easier to clip it to the cover than to the Nook itself). You can even charge the device without opening the cover, though you do have to move the clasp aside.
This case must be discontinued, though, because now I can't find it on either the B&N or the Best Buy site.
I didn't like any cases available for the nst. Till I made one. What do you guys think?
Awesome. Went making such myself
larryflynt said:
I didn't like any cases available for the nst. Till I made one. What do you guys think?
Click to expand...
Click to collapse
Good work, very cool. Did you use a book, or some sort of journal? I have been wanting to do something like this, but do not have any books that I am willing to cut up.
Sent from my SCH-I500 using xda premium
It was a blank journal that was 5.75x7in. It was tight fit but I managed.
I searched far and wide for a case for my STR and I thought about getting a Speck FitFolio until I saw one in person in Target. Seemed too flimsy. Anyway, after a long search I found Oberon covers. Solid drum dyed tooled leather, about 3/16" thick. Not cardboard covered by a thin strip of 'leather'. They come in many designs and colors and cost about $15 more than a high priced B&N cover, which is OK, because I think it will last a lifetime.
I do not work for, nor am I affiliated with Oberon Designs. I'm just a very satisfied customer.
The oberon case looks familiar:
Body Glove - Tactic Case for the HTC EVO 4G LTE
I saw 2 threads where people were going to try this case. If you purchased one would you recommend it? I did see them on ebay for $18.99 with free shipping.
I have a Body Glove for my Evo 4g and really like it.
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
jamerican413 said:
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
Click to expand...
Click to collapse
+1
Body glove has been a lot more miss than hit as of late for me tho. Anything from cheap cases that break after a couple days, scratching the phone, not fitting correctly or not locking and falling off to paint/clear coat rubbing off the first say.
Sadly, I wouldn't recommend body glove to anyone.
Sent from my EVO using xda premium
My local sprint store had the white ones in stock Saturday when I got my phone
I will be interested in hearing your opinion about how well the buttons work with this case.
jamerican413 said:
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
Click to expand...
Click to collapse
Got one with my phone Saturday. Fit is almost too good. Hard to remove without taking the plastic covers off the back with it. Also the cover scratches easy and is looking pretty old after just 4 days. I got the white one which was all they had available Saturday. Will be looking for a gel case soon. Buttons work alright though. No scratches on my phone from the case.
Sent from my EVO LTE using xda premium
Thanks for that. I'm cancelling my order. Too much money to not be happy...
My Sprint store had the white ones on release day so I got one. Seems to work pretty good!
Sorry for the bump and double post, but I wanted to second that the body glove RIPS the top-back off of the phone when removed. Or it rips the bottom panel off the phone (worse!)
I like it, I just don't like removing it!
its really hard to take out and when you do it it will take your back cover out, i dont like this cover because it feels weak, i bought it @ sprint but already purchased a otterbox commuter to replace it,
I got this case at the Sprint store and have been pretty happy with it. The combination of the hard plastic outside and the silicone inside seems to offer a lot of protection, and there is a nice lip to protect the screen. All the holes seem to be in the right places and the buttons work well. The power button is a bit difficult to press, but I actually like this as it prevents it from being accidentally locked in my pocket (it only there were a way to disable the Sense ring lock).
It does make the phone noticeably bulkier, especially on the back where the case bulges out a bit (there is a 1mm gap between the phone and the case. Still, the overall package is no thicker than my naked HTC Hero. The added side thickness also means that the phone doesn't stand up as much when using the kickstand.
The store only had the white version, unfortunately, but since I was exchanging another case I didn't have much of a choice (it was that or the pink Otterbox Commuter).
I've removed it a couple of times and had no problems with the back cover coming off, but I was careful to follow the removal instructions (at least on the Sprint version, it comes with instructions telling you to remove it starting with the bottom corner next to the microphone, followed by the other bottom corner, following by sliding the top out). It fits the car dock well with the insert removed and with some minor adjustment of the foam pads.
I got the Body Glove from Sprint as well, and don't need it since I already had a case. It is the gray one. If anyone is interested in buying it at a discounted rate, it is never used and still has the original packaging. PM me if interested.
ahecht said:
I got this case at the Sprint store and have been pretty happy with it. The combination of the hard plastic outside and the silicone inside seems to offer a lot of protection, and there is a nice lip to protect the screen. All the holes seem to be in the right places and the buttons work well. The power button is a bit difficult to press, but I actually like this as it prevents it from being accidentally locked in my pocket (it only there were a way to disable the Sense ring lock).
It does make the phone noticeably bulkier, especially on the back where the case bulges out a bit (there is a 1mm gap between the phone and the case. Still, the overall package is no thicker than my naked HTC Hero. The added side thickness also means that the phone doesn't stand up as much when using the kickstand.
The store only had the white version, unfortunately, but since I was exchanging another case I didn't have much of a choice (it was that or the pink Otterbox Commuter).
I've removed it a couple of times and had no problems with the back cover coming off, but I was careful to follow the removal instructions (at least on the Sprint version, it comes with instructions telling you to remove it starting with the bottom corner next to the microphone, followed by the other bottom corner, following by sliding the top out). It fits the car dock well with the insert removed and with some minor adjustment of the foam pads.
Click to expand...
Click to collapse
Seems like a lot of people missed this when I read reviews. I myself missed it initially.
http://www.shopandroid.com/body-glove-tactic-case/4A123A11576A.htm has the black version of the case for $17 today (7/19/2012) as their deal of the day.
Does anyone know if there is a holster out there that will work with the Body Glove Tactic case? I recently got a case and holster combo from my local Sprint store and I didn't check to see if the holster would work with the Car Dock Sprint sales and the case was too big to fit in the car dock even with the insert removed. The Body Glove Tactic case works great in the Car Dock, but I would really like to have a holster for it.
Thanks in advance.
jones79 said:
Does anyone know if there is a holster out there that will work with the Body Glove Tactic case? I recently got a case and holster combo from my local Sprint store and I didn't check to see if the holster would work with the Car Dock Sprint sales and the case was too big to fit in the car dock even with the insert removed. The Body Glove Tactic case works great in the Car Dock, but I would really like to have a holster for it.
Thanks in advance.
Click to expand...
Click to collapse
I have the same this cover as well as the otterbox commuter and i use the seidio Holster for both of them, it fits like if it was made for it.
<--- Thanks button :laugh:
Do you have the Active or Surface holster from Seidio? Thanks for the response.
Sent from my EVO using Tapatalk 2
this case broke my first htc evo 4g lte, its why i had to use my replacement, when i took the case off, it fit so tight, that it took the back off too, tearing the plastic......DO NOT BUY , BUYER BEWARE...spend the extra money and get a real case
I love mine. I love the grip on it. However, trying to remove it is a huge hassle and sometimes it breaks the case partially. Otherwise it's great for the grip. Feels good when I play the Pokemans on my EVO.
Sent from my EVO using xda app-developers app
I have one of these on my phone. It does scratch quite easy and takes the back off when you pull it off, but it does not scratch the phone or trap dirt and dust. other than scratching up i dont mind the case. I would much rather have that happen to the case than my phone.
Just wanted to say When I got my G8X I also picked up a spec case for it.
everything is great EXCEPT... Its aq VERY tight fit, I was worried about the phone while putting it in the case, start on one long edge and get BOTH corners inbefore trying a 3rd corner and then the last one.. a drop of water on the last one helps a lot and the phone is waterproof so...
OH, and I can put a metal shim under this case for my car magnetic mount.
Thanks for sharing, and I would like to know is there any other case available , or at least some skins for the back.
The phone is too slippery, it keeps drop from my desks to the floor...
I don't always use the phone with its dual view case as it adds too much bulky, only use it when nesseary, e.g. read a book
I bought a black TPU case to use until I receive my Dual Screen Case. I have seen the same case sold by other sellers on Amazon. Comes in 4 colors.
https://www.amazon.com/gp/product/B07ZR3JYZF/
Thanks, I just ordered one from aliexpress
New case from Voia. (G8x/V50S)
https://www.ebay.com/itm/VOIA-LG-G8X-V50S-ThinQ-Soft-Pop-Case-Free-shipping/264564411451?hash=item3d99448c3b:m:m6BPWZM5z_VHLaMsGIMpMeQ
The Source in Canada has Pure Gear clear cases that fit really well and look good on the phone
https://www.thesource.ca/en-ca/cell...g8x-thinq-slim-shell-case---clear/p/108085314
stemplar007 said:
New case from Voia. (G8x/V50S)
https://www.ebay.com/itm/VOIA-LG-G8X-V50S-ThinQ-Soft-Pop-Case-Free-shipping/264564411451?hash=item3d99448c3b:m:m6BPWZM5z_VHLaMsGIMpMeQ
Click to expand...
Click to collapse
came here to recommend the VOIA case. probably my favorite phone case I've ever had, been using daily for ⁴ months now. perfect size and thickness, protective yet sleek. nice soft rubber feel that doesn't scratch, and the felt inside is an added bonus. amazing value too. I must admit however that shipping takes a while and mine got lost in the mail, so it took a few weeks. still worth the wait.