Hi,
I have made a failed attempt to REBRAND my Honor 9 ROM from Chinese to EU one. After trying to restore my phone from TWRP (also failed due to some unknown reason), I am finding my phone's bootloader locked.
I have the unlock code with me, however since USB debugging is not enabled i run into the following error:
FAILED (remote: Command not allowed)
finished. total time: 0.016s
Any ideas on getting USB Debugging enabled via fastboot or adb ? I can't get past Huawei eRecovery.
Thanks
Rommco05 said:
Fastboot recognize phone?
Click to expand...
Click to collapse
Yes. When I type the command fastboot devices it shows me the serial number of the phone.
Rommco05 said:
So this problem has nothing with usb debbuging. Have your phone FRP? If yes is locked or unlocked?
Click to expand...
Click to collapse
The message at the fastboot screen is
PHONE Locked
FRP Locked
Rommco05 said:
So this problem has nothing with usb debbuging. Have your phone FRP? If yes is locked or unlocked?
Click to expand...
Click to collapse
It is the Chinese model STF-AL10. It did not have FRP lock. However after trying to restore from your TWRP backup it started giving these messages.
Rommco05 said:
omg my twrp backup is for STF-L09, EU model not for STF-AL10! DC Phoenix is tool (payed) which can probably help you unlock phone and repair it
Click to expand...
Click to collapse
Ok. I was just waiting for that validation. Will try the Dc unlocker
Rommco05 said:
omg my twrp backup is for STF-L09, EU model not for STF-AL10! DC Phoenix is tool (payed) which can probably help you unlock phone and repair it
Click to expand...
Click to collapse
Will the update.app of B120 work with D C Unlocker for STF-AL10?
Rommco05 said:
Really don't know, maybe is better to use original firmware for your model. This tool maybe can rebrand phone too
Click to expand...
Click to collapse
Any links for the full firmware of STF-AL10?
The rebrand forum had 3 files in HWOTA folder. Can you help me identify which files to use?
Rommco05 said:
Your model is STF-AL10C00? U need all 3 files
Click to expand...
Click to collapse
Yes STF-AL10COO.
Will the rebrand files work? I have all three of them.
Rommco05 said:
Your model is STF-AL10C00? U need all 3 files
Click to expand...
Click to collapse
As your Chinese model tries to install original firmware through Erecovery it should work.
letterio said:
As your Chinese model tries to install original firmware through Erecovery it should work.
Click to expand...
Click to collapse
I am going nuts trying to figure this out. So now finally, I am going to use the DC unlocker to unlock and flash L09 rebrand files on my AL10
Wish me luck!
raw_jay said:
I am going nuts trying to figure this out. So now finally, I am going to use the DC unlocker to unlock and flash L09 rebrand files on my AL10
Wish me luck!
Click to expand...
Click to collapse
Okay how do you like good luck
Success!!!!
Rommco05 said:
I'm never rebrand phone so I don't know, but I think DC unlocker can rebrand phones
Click to expand...
Click to collapse
I have finally managed to unbrick my phone. Thank you all for your continuous guidance and support.
How did YouTube unbrick your Phone Raw_Jay, il have the same problem... Please help...
redhah said:
How did YouTube unbrick your Phone Raw_Jay, il have the same problem... Please help...
Click to expand...
Click to collapse
He used a paid software called DC Phoenix
PalakMi said:
He used a paid software called DC Phoenix
Click to expand...
Click to collapse
YEAH, I DID IT !!!! With dc Phoenix.... I was stuck with my P8 lite bricked. Fastboot OK but No way to unlock bootloader because of OEM usb debug off.... So i payed 15 crédits on dc Phoenix to flash my P8 during 72hours... I get stock firmware from their support zone (Prague l31_c432B164 germany Portugal switzerland france. APP) and i flashed it with dc Phoenix and BINGO!!!! My P8 lite came back to life after 3 weeks of hard reading, searching, flashing, working.... Thank you Palakmi....
You're welcome
Requesting DC Phoenix account
redhah said:
YEAH, I DID IT !!!! With dc Phoenix.... I was stuck with my P8 lite bricked. Fastboot OK but No way to unlock bootloader because of OEM usb debug off.... So i payed 15 crédits on dc Phoenix to flash my P8 during 72hours... I get stock firmware from their support zone (Prague l31_c432B164 germany Portugal switzerland france. APP) and i flashed it with dc Phoenix and BINGO!!!! My P8 lite came back to life after 3 weeks of hard reading, searching, flashing, working.... Thank you Palakmi....
Click to expand...
Click to collapse
Can i have your dc phoenix account for 1 time use plz.. I am kind of stuck in same situation and my country not support payments.
I shall be very thankful to you?
I dont have any crédits now. ...sorry
Related
HI guys,
I'm asking if there's any way to root my device (honor 7 marshmallow) without unlock ???? the bootloader???
meshoo00oo said:
HI guys,
I'm asking if there's any way to root my device (honor 7 marshmallow) without unlock ???? the bootloader???
Click to expand...
Click to collapse
No way !
meshoo00oo said:
HI guys,
I'm asking if there's any way to root my device (honor 7 marshmallow) without unlock ???? the bootloader???
Click to expand...
Click to collapse
Nope, never gonna happen.
And please don't use KingRoot, even if it works, it will mess up your phone for future updates.
samcro94 said:
No way !
Click to expand...
Click to collapse
So how to unlock the bootloader because Huawei site give me the 14 days error??!! :'(
meshoo00oo said:
So how to unlock the bootloader because Huawei site give me the 14 days error??!! :'(
Click to expand...
Click to collapse
The only other way is a paid method or you can wait 14 days after logging in on your phone with Huawei id.
If you wanna try paid method, just google huawei bootloader unlock paid method Paul O'Brian XDA and you can check it out.
meshoo00oo said:
So how to unlock the bootloader because Huawei site give me the 14 days error??!! :'(
Click to expand...
Click to collapse
DC Unlocker will help (4 euros)
samcro94 said:
DC Unlocker will help (4 euros)
Click to expand...
Click to collapse
DC unlocker will give me the code same same like Huawei site or this code is unofficial and can make any problems to my device??
meshoo00oo said:
DC unlocker will give me the code same same like Huawei site or this code is unofficial and can make any problems to my device??
Click to expand...
Click to collapse
It won't cause any problems but Google how to use DC locker first. it's a bit lengthy process.
meshoo00oo said:
HI guys,
I'm asking if there's any way to root my device (honor 7 marshmallow) without unlock ???? the bootloader???
Click to expand...
Click to collapse
Have you tried to login using Facebook account on Huawei site.
Sent from my PLK-L01 using XDA-Developers mobile app
muhammad Shohayeb said:
Have you tried to login using Facebook account on Huawei site.
Click to expand...
Click to collapse
I tried everything with no success so I used DC unlocker and finally unlocked the bootloader and I will start now to install the twrp but I don't know which better, install it in recovery or in erecovery?!
meshoo00oo said:
I tried everything with no success so I used DC unlocker and finally unlocked the bootloader and I will start now to install the twrp but I don't know which better, install it in recovery or in erecovery?!
Click to expand...
Click to collapse
To install twrp and root i use the MultiTool, simple fast and safe .
meshoo00oo said:
I tried everything with no success so I used DC unlocker and finally unlocked the bootloader and I will start now to install the twrp but I don't know which better, install it in recovery or in erecovery?!
Click to expand...
Click to collapse
If you want to still be able to use official ota updates (which are infrequent ) install it on erecovery partition . However, recovery partition is more accessible than erecovery ( no need to pc connection, booting up directly to twrp without restart) .
So if you're using custom Rom use recovery partition and if you are a fan of stock rom use erecovery.
Sent from my PLK-L01 using XDA-Developers mobile app
Now we have a service firmware and scatter file.
To launch Write efuse need to install ePass2003.
In the cloud there are instructions for connecting the phone to flashing
I hope we will understand how to use it
Cloud
Please help me I am in boot loop ... Recovery doesn't open.. Give step by step procedure to flash recovery
arunshand said:
Please help me I am in boot loop ... Recovery doesn't open.. Give step by step procedure to flash recovery
Click to expand...
Click to collapse
Your device is hard bricked. Since the bootloader is locked, you'll have to unbrick the phone using a mrt dongle. If you can't find one, then your only option is going to a service center. (SP Flash Tool does not work)
I am solved this by only way of service centre.
Sp Flashtool works and unbricks without MRT Dongle 100% Tried on bricked Meizu M3 Note L681H Global
nikoman1987 said:
Sp Flashtool works and unbricks without MRT Dongle 100% Tried on bricked Meizu M3 Note L681H Global
Click to expand...
Click to collapse
Thank you
nikoman1987 said:
Sp Flashtool works and unbricks without MRT Dongle 100% Tried on bricked Meizu M3 Note L681H Global
Click to expand...
Click to collapse
Can you share with us how you did it please?
Skylordus said:
Can you share with us how you did it please?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/development/developer-verified-meizu-m3-note-hard-t3682743
Skylordus said:
Can you share with us how you did it please?
Click to expand...
Click to collapse
It is not that complicated.The complicated thing is that you won't find the files on the web,i have them on a flash drive, PM me!
I have upgraded firmware by mistake flyme 7.8.6.5A in my Meizu M3 Note and i want to downgrade because when i going to downgrade from these firmware its not working and IMEI showing null.
Hey, everyone, I just got the new P20 Lite running EMUI 8.0 and on the June security patch. Been through MT's Firmware Finder before with the Huawei Mate 9 Lite; however, I have seen that the app isn't working well with Huawei's servers at the moment - via the screenshot below.
How can I update my phone (model: ANE-LX3C605) to the latest security update (August) using the app - because, I can't seem to receive the OTA Update?
Here's the latest screenshot detailing the problem.
The latest version ANE-LX3C605 is not yet approved
You have to wait for the Full-PV so you can try that update :good:
KingOfMezi said:
The latest version ANE-LX3C605 is not yet approved
You have to wait for the Full-PV so you can try that update :good:
Click to expand...
Click to collapse
Okay, thank you, King - but, how do I actually update it? It appears to me that Firmware Finder is broken.
vince.lupe said:
Okay, thank you, King - but, how do I actually update it? It appears to me that Firmware Finder is broken.
Click to expand...
Click to collapse
You can force it and update ANE-LX3C605B140 with hwOta for p20 lite ,luck :good:
https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
KingOfMezi said:
You can force it and update ANE-LX3C605B140 with hwOta for p20 lite ,luck :good:
https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
Click to expand...
Click to collapse
Yeah, but I would need to rebrand wouldn't I? I am not rooted and don't plan on doing so, my friend.
KingOfMezi said:
You can force it and update ANE-LX3C605B140 with hwOta for p20 lite ,luck :good:
https://forum.xda-developers.com/huawei-p20-lite/development/hwota8-huawei-p20-lite-t3787787
Click to expand...
Click to collapse
@KingOfMezi, I would need to rebrand, wouldn't I?
vince.lupe said:
@KingOfMezi, I would need to rebrand, wouldn't I?
Click to expand...
Click to collapse
instead use HurUpdate 0.4, its better than HwOTA8. HwOTA is quite buggy and broken. With HurUpdater, you dont need to rebrand your phone, however you should download the files which are actually meant for your device as per current ROM installed. Only difficult is that, you have to unlock your device which may result in data wipe, but you can always take a backup and recover. You also need to install twrp (I recommend Pretorian8 twrp). Rooting is not required for that.
fbh59 said:
instead use HurUpdate 0.4, its better than HwOTA8. HwOTA is quite buggy and broken. With HurUpdater, you dont need to rebrand your phone, however you should download the files which are actually meant for your device as per current ROM installed. Only difficult is that, you have to unlock your device which may result in data wipe, but you can always take a backup and recover. You also need to install twrp (I recommend Pretorian8 twrp). Rooting is not required for that.
Click to expand...
Click to collapse
Since Huawei doesn't give out unlock codes any longer for the bootloader, what's the best way to unlock my bootloader? Also, if I can unlock my bootloader, could you please also give me the link to HurUpdate?
vince.lupe said:
Since Huawei doesn't give out unlock codes any longer for the bootloader, what's the best way to unlock my bootloader? Also, if I can unlock my bootloader, could you please also give me the link to HurUpdate?
Click to expand...
Click to collapse
For the time being, unlocking bootloader might cost around 5-15 Euros via DC unlocker. Click here for the detailed guide.
As the user states, you can try your luck to unlock your bootloader for free by mailing huawei care. I dont know how many had success by mailing though, but many succeeded by using DC unlocker.
Now after you unlock your bootloader, you can try using HurUpdater with detailed guide and download link.
fbh59 said:
For the time being, unlocking bootloader might cost around 5-15 Euros via DC unlocker. Click here for the detailed guide.
As the user states, you can try your luck to unlock your bootloader for free by mailing huawei care. I dont know how many had success by mailing though, but many succeeded by using DC unlocker.
Now after you unlock your bootloader, you can try using HurUpdater with detailed guide and download link.
Click to expand...
Click to collapse
Yeah, I'm not gonna pay 5-15 euros to unlock my bootloader... I tried emailing Huawei and they don't give any unlock codes whatsoever. Looks like I might have to wait patiently.
I have the same problem as you, with my p20 lite ane lx3c605, i´ve allready downloaded the last version from FF the b147, but the stock recovery doesn´t istall it, it stays in 5% then says error while updating, it seems the only way to have an updated huawei phone is paying for the code to unlock the bootloader, with my p10 didn´t have that problem because the official unloking code page was still working a few months ago.
Did a reboot and now is stuck at optimizing app logo.. it goes over and over.
What to do? How do I reset it?
man i have same problem..(
guys help us plz)
Darkxy1983 said:
Did a reboot and now is stuck at optimizing app logo.. it goes over and over.
What to do? How do I reset it?
Click to expand...
Click to collapse
Quattres said:
man i have same problem..(
guys help us plz)
Click to expand...
Click to collapse
Try a factory reset with adb:
Code:
adb reboot wipe
I’m tried , and via fast boot commands too, same result . Nothing happens , watch are rebooting , then again same **** .
May be I need find firmware ISO, but I can’t find
have you unlocked your watch?
1immortal said:
have you unlocked your watch?
Click to expand...
Click to collapse
nope, Im tried to do that too, by Amazfit Tool and by All-in-One-TOOl.
found info about Serial number, Bootloader version , and Amazfit Tool found OS version, BUT on https://unlockamazfit.com/ i have a message that i written wrong OS version. I dont know how to get right version to unlock.
Im also tried to find stock firmware ISO, but failed in that =(
Hi,
ihave used the latest ROM version stratos 2 2.3.11.0
Thanks
Quattres said:
nope, Im tried to do that too, by Amazfit Tool and by All-in-One-TOOl.
found info about Serial number, Bootloader version , and Amazfit Tool found OS version, BUT on https://unlockamazfit.com/ i have a message that i written wrong OS version. I dont know how to get right version to unlock.
Im also tried to find stock firmware ISO, but failed in that =(
Click to expand...
Click to collapse
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
burdag said:
Hi,
ihave used the latest ROM version stratos 2 2.3.11.0
Thanks
Click to expand...
Click to collapse
What?? You installed Stratos firmware in your Stratos 3 watch???
No i only write the OS version for unlock the bootloader.
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
What?? You installed Stratos firmware in your Stratos 3 watch???
Click to expand...
Click to collapse
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Quattres said:
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=4349826312261649290
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
What?? You installed Stratos firmware in your Stratos 3 watch???
Click to expand...
Click to collapse
Quattres said:
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Click to expand...
Click to collapse
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Quattres said:
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Click to expand...
Click to collapse
That's not an error, it's the output when booting the modded recovery in fastboot, and it's ok. After that you should see the ! symbol in watch and the installer should start copying the files to the watch
What do you get in the installer?
Quattres said:
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Click to expand...
Click to collapse
I can confirm the firmware works. Had the same problem and after ROM flash everything works.
I had unlocked my watch first with one in all tool. Maybe that can help you to flash the ROM.
How flashing looks in steps:
https://photos.app.goo.gl/db1yUsyuudcBFgWd6
https://photos.app.goo.gl/egvEwji1e9SzVMKq6
Saratoga79 said:
That's not an error, it's the output when booting the modded recovery in fastboot, and it's ok. After that you should see the ! symbol in watch and the installer should start copying the files to the watch
What do you get in the installer?
Click to expand...
Click to collapse
Darkxy1983 said:
I can confirm the firmware works. Had the same problem and after ROM flash everything works.
I had unlocked my watch first with one in all tool. Maybe that can help you to flash the ROM.
How flashing looks in steps:
https://photos.app.goo.gl/db1yUsyuudcBFgWd6
https://photos.app.goo.gl/egvEwji1e9SzVMKq6
Click to expand...
Click to collapse
Dude thx a lot, I just downloaded ROM, unpacked in C: and run fast boot from folder,then the flashing started! Thx!!!
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
Click to expand...
Click to collapse
I assume this can be used to flash China version A1928 to Global version as long as the bootloader has been unlocked using https://unlockamazfit.com/ ?
evilhomura89 said:
I assume this can be used to flash China version A1928 to Global version as long as the bootloader has been unlocked using https://unlockamazfit.com/ ?
Click to expand...
Click to collapse
It's not tested yet. I recommend you waiting to have a firmware dump of the Chinese version just in case, or if you are really interested and you own the Chinese model, help providing the firmware dump I can provide a Windows tool to do that.
Saratoga79 said:
It's not tested yet. I recommend you waiting to have a firmware dump of the Chinese version just in case, or if you are really interested and you own the Chinese model, help providing the firmware dump I can provide a Windows tool to do that.
Click to expand...
Click to collapse
Hi Saratoga, may I know where can I get the firmware dump? I have the Chinese model of Stratos 3, and I was planning to install the US firmware version above.
jazyen27 said:
Hi Saratoga, may I know where can I get the firmware dump? I have the Chinese model of Stratos 3, and I was planning to install the US firmware version above.
Click to expand...
Click to collapse
I posted the link few post above.
But as I said before, just in case something goes wrong, those with a Chinese model may collaborate to get a dump of the Chinese firmware from their whatc just in case they have to go back to stock/original firmware.
This is just a precaution, because if for some reason the US firmware doesn't work in the Chinese model, nowadays there is no way to restore the watch, that's why I'm asking for the Chinese firmware dump help.
I think jazyen27 thought , how to read dump from watch.........
I can provide a Windows tool to do that.
Click to expand...
Click to collapse
(Sorry for my bad english)
İ'm repair p20 lite ANE-LX1.After repair,phone after the smartphone was turned on, it asked me for the sim unlock code. can you help me?
İ have HCU TOOLS
Enter sim pin or reset it by going to your carrier app or account and doing it.
faruk22 said:
(Sorry for my bad english)
İ'm repair p20 lite ANE-LX1.After repair,phone after the smartphone was turned on, it asked me for the sim unlock code. can you help me?
İ have HCU TOOLS
Click to expand...
Click to collapse
it looks like the repair wasn't successful . You have wrong model and build number bro - system 8.0.0.046. (You have incompatible or incomplete firmware on your phone).
-Alf- said:
it looks like the repair wasn't successful . You have wrong model and build number bro - system 8.0.0.046. (You have incompatible or incomplete firmware on your phone).
Click to expand...
Click to collapse
If thats true, it woildnt have flashed, more like boot looped or wouldn't have boot.
-Alf- said:
onarım başarılı olmamış gibi görünüyor . Model ve yapı numarası yanlış kardeşim - sistem 8.0.0.046. (Telefonunuzda uyumsuz veya eksik bellenim var).
Click to expand...
Click to collapse
how can i find the right version :/
Kenora_I said:
If thats true, it woildnt have flashed, more like boot looped or wouldn't have boot.
Click to expand...
Click to collapse
Really? Ok Bye and have a nice day!
-Alf- said:
Really? Ok Bye and have a nice day!
Click to expand...
Click to collapse
0~0
?
faruk22 said:
how can i find the right version :/
Click to expand...
Click to collapse
Did you have a sim pin before?
Kenora_I said:
Did you have a sim pin before?
Click to expand...
Click to collapse
no, my pin code was off
faruk22 said:
no, my pin code was off
Click to expand...
Click to collapse
Huh, so you haven't tried changing it or resetting it based on your carrier instructions?
idk why it activated but you could try find a way to reset it
faruk22 said:
how can i find the right version :/
Click to expand...
Click to collapse
faruk22 said:
İ'm repair p20 lite ANE-LX1.
Click to expand...
Click to collapse
What do you mean by that? Try explaining what exactly happened, step by step.
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Kenora_I said:
Huh, so you haven't tried changing it or resetting it based on your carrier instructions?
idk why it activated but you could try find a way to reset it
Click to expand...
Click to collapse
but this is not related to sim card
Then why is it asking for a sim unlock code
hey :/
You need to get the unlock code from your carrier.
up