[G531F] CS-Rom v3.2 [FIXED ALL BUGS!] - Galaxy Grand Prime General

THREAD CLOSED!!!
[G531F] CS-Rom v3.2 (android 5.1.1) by Adi [FIXED ALL BUGS!]
Features:
-Pre-Rooted,
-Xposed Framework installed,
-Busybox installed,
-Customizable Status Bar,
-Customizable Notification Bar,
-Deodexed,
-Debloated,
-Deknoxed,
-Some Xposed Modules,
-Added SU.D Support,
-Added Custom Bootanimation,
-Now it's Zipaling,
-Added Init.D Support,
-Much more...
Installation:
Flashable Zip Version:
-Download ZIP,
-Move ZIP to SD Card or Internal Storage,
-Boot into TWRP,
-Wipe: Cache, Dalvik, Data, System,
-Flash ZIP,
-Reboot.
Backup Version:
-Download ZIP,
-Extract ZIP.
-Move TWRP folder to SD Card or Internal Storage,
-Boot into TWRP,
-Restore backup,
-Reboot.
DOWNLOAD:
-Flashable ZIP without TouchWiz (NougatLauncher):
https://drive.google.com/uc?id=0B2OyU1OLo9sjbmRuakExMXRrVGs&export=download
-Flashable ZIP with TouchWiz:
https://drive.google.com/uc?id=0B2OyU1OLo9sjc2xsSFh6RjdwX0E&export=download[/B]
-TWRP Backup without TouchWiz (NougatLauncher):
https://drive.google.com/uc?id=0B2OyU1OLo9sjQXFXa2ZSNEd4Q3M&export=download[/B]
-TWRP Backup with TouchWiz:
https://drive.google.com/uc?id=0B2OyU1OLo9sjNTJRZEZJcWFtaGs&export=download[/B]
Special Thanks to Imioł (XDA nick : Sh0peN) for lending the device.​

FINALLY!

Perfect!
Hope it works fine, waiting so long..

You might need to flash GApps...
EDIT:Just flash the 5.1 GApps for OpenGApps, if it doesn't work.

does this rom have any issue

Destroyer08 said:
does this rom have any issue
Click to expand...
Click to collapse
Probably not.

At last...thank you very much

what version of recovery do you use?

melc70 said:
what version of recovery do you use?
Click to expand...
Click to collapse
TWRP 3.0.2-0

error
Destroyer08 said:
does this rom have any issue
Click to expand...
Click to collapse
error extractfork() process ended witherror 255

[email protected] said:
error extractfork() process ended witherror 255
Click to expand...
Click to collapse
idk whats wrong... do full wipe or something

[email protected] said:
error extractfork() process ended witherror 255
Click to expand...
Click to collapse
Now I'm working on 2.0 version...

adiJ5FN said:
TWRP 3.0.2-0
Click to expand...
Click to collapse
That version never existed for SMG-531F as far as I'm aware.
In addition, I followed all the instructions, but TWRP won't detect the backup.
Version : TWRP : 2.8.7
Any ideas about how to fix that ? I have been waiting for a custom ROM for two years now.

?
TWRP 2.8.7 Cant see the file when i press Restore

just create a boot backup, write the folder name and delete it if you want, rename the rom folder.

!
Perfect rom...thanks....

Can i get rid of FRP lock after flashing this rom?

Hi,
I'm new and amateur with this thing, but can someone tell me cause I own G531F with Android 5.1.1, if I do everything from this few steps posted in the first link, will I have Android 6 on my phone or do I need to do something more beside that?
Thanks!

Incognito493 said:
That version never existed for SMG-531F as far as I'm aware.
In addition, I followed all the instructions, but TWRP won't detect the backup.
Version : TWRP : 2.8.7
Any ideas about how to fix that ? I have been waiting for a custom ROM for two years now.
Click to expand...
Click to collapse
TWRP 3.0.2-0 Just flash via odin...
https://forum.xda-developers.com/attachment.php?attachmentid=3955426&d=1480666661

Important
I can't make this work, I don't have enough storage because it's too big, i got 8 gb internal and 2gb. Compress it or maybe do it as a install from twmp not restoring it.

Related

stock rom v20D bumped [android 5.0][d855][Italy]

hi
here is the flashable d855 20d rom
Italy
for 16/32gb
testet
how to :
1.install latest 4.4.2
2.root then install recovery (unlock)
3.(optional , wipe cache,dalvik,system,data,internal)
4.copy to memory then flash through recovery
5.then reboot
6.go to recovery and flash super su
all partitions are stock
rom:
Code:
http://uptobox.com/znwrofiifz9u
http://oceanhost.eu/aowq7vl2h57k/20d_g0dsend313v2.zip.htm
http://ul.to/631f6ec9
md5 :
067651767d3f59cc68673b9bc56a4ee0
supersu:
Code:
http://download.chainfire.eu/636/SuperSU/UPDATE-SuperSU-v2.37.zip
Credit:
@cybojenix
@bump! team
@thecubed
Skin1980_autobump script
if you have problem with using internal memory
in cmd type
Code:
adb shell
su
restorecon -v -R /data/media
or
adb shell
su
restorecon -FR /data/media/
It includes 20D bumped kernel or another kernel?
Thank you!
davidep85 said:
It includes 20D bumped kernel or another kernel?
Click to expand...
Click to collapse
Well, if it is Stock, then it should be the original 20D kernel. The OP did not say otherwise.
tobitege said:
Well, if it is Stock, then it should be the original 20D kernel. The OP did not say otherwise.
Click to expand...
Click to collapse
yes
all partitions are stock
mlm1102003 said:
yes
all partitions are stock
Click to expand...
Click to collapse
Can you upload the kernel please ..cos i flashed kdz rom and im not rooted ..my internet too slow to download this rom
rom is not working for me, I have problems with secure boot, like not bumped kernel. restored my backup.
davidep85 said:
rom is not working for me, I have problems with secure boot, like not bumped kernel. restored my backup.
Click to expand...
Click to collapse
tested 10 times
check md5
Code:
9e4082949fdc71da61d8254ccb8d5161
Hi, thank you for the great work! I am on AOSP liquid smooth rom. Is it possible to flash/update only the modem?
chaosnever said:
Hi, thank you for the great work! I am on AOSP liquid smooth rom. Is it possible to flash/update only the modem?
Click to expand...
Click to collapse
the best way to install it
is in first post
install 10n
then install root and recovery(unlock)
then flash the rom
mlm1102003 said:
the best way to install it
is in first post
install 10n
then install root and recovery(unlock)
then flash the rom
Click to expand...
Click to collapse
Entirely clear,
but one thing I am not clear (in general) about the internal SD memory: moving from KitKat to Lollipop ROM by using TWRP recovery should I format the internal SD (or delete all content manually)?
In generally, I didn't understand if there's an incompatibility of data applications residues coming from KitKat that might annoy Lollipop.
Thanks in advance
Romulus76 said:
Entirely clear,
but one thing I am not clear (in general) about the internal SD memory: moving from KitKat to Lollipop ROM by using TWRP recovery should I format the internal SD (or delete all content manually)?
In generally, I didn't understand if there's an incompatibility of data applications residues coming from KitKat that might annoy Lollipop.
Thanks in advance
Click to expand...
Click to collapse
/system format means your Android system is removed
/data format means your apps are erased
/cache format means.. pretty much what it says
That's all what you need for a new ROM. It's called a "clean flash"
A dirty flash would be the above, but without formatting /data. This retains the installed apps and their settings, but it might upset the new system and cause incompatibilities. It's not a recommended move.
But now, if, for some reason (like selling your phone), you'd like to "FULLY wipe" the phone
/data/media fully wipes your visible folders (not system ones, but the one where apps stores data files, photos, images, music etc)
So wiping Data is mandatory? No way to keep the apps, when coming from an older stock rom 10l?
Download link? I tried all links but only ads become in my screen...
thedoginthewok said:
So wiping Data is mandatory? No way to keep the apps, when coming from an older stock rom 10l?
Click to expand...
Click to collapse
Yes, always do when between different Android or ROM versions. Dirty flashing usually only works without issues when upgrading from a ROM version (example) 4.0 to 4.1 etc. But going from Kitkat to Lollipop it is required or the phone may not boot at all. There are obviously plenty of tools to help with backup/restore of apps+settings, but time spent on fresh install well spent compared to fixing issues or doing it all over again later.
Please anyone who downloaded this rom upload the kernel
Hi i have a few questions about this rom
1-is it necessary to install a 4.4.2 rom and then flash this rom or i can clean flash this rom over android HD 4.0 rom that i have right now ?
2-is this rom smooth or it has lags ?
3-how much screen time do u get with this rom?
Thanks in advance
Stupid quesiton, sorry, delete this post.
mlm1102003 said:
hi
rom:
Code:
updating
md5 :
Click to expand...
Click to collapse
Thanks for all, but where is the link
Edit : Link is back... You uploaded 313V2.... What's the difference between V1 and V2 ?????
TeamR said:
Thanks for all, but where is the link
Edit : Link is back... You uploaded 313V2.... What's the difference between V1 and V2 ?????
Click to expand...
Click to collapse
v1 sometime have problem with system ui (it does not load)
v2 just fix that problem

ROM][4.4.2][SM-T530][T530XXU1AOA1]Stockless Rom SM-T530[02-02-2015]

Well here is ladies & gentlemen...i would like to present to you the first rom i've ever made! Just to be clear i am NOT a dev by any means...just another enthusiastic user looking to make a few improvements to his device so i & others may enjoy it more.
All the work done to create a zip Promeo123, I just helped
Based on the stock T530XXU1ANJ2 (region SEK)
Full stock odex version download : https://drive.google.com/file/d/0B4nVdlEf1VK3MjRJYm5ndVJaWjA/view?usp=sharing
Ful stock deodex version download : https://drive.google.com/file/d/0B4nVdlEf1VK3ZDEwdXY3RUxrQkU/view?usp=sharing
Also i made custom rom based on this stock .
Features :
ver.3
1.Deodexed
2.Debloated
3.Rooted
4.Busy box
5.Knox removed
7.Stock kernel init.d support
8.Added some apps from Tab S ( systemUI , weather , videoplayer , My files )
9.Removed Touchwiz , install Galaxy Launcher (Touchwiz) and Nova Launcher .
10. Added AC3 sound .
11.Fix for external sd-card
12.Viper4Android FX&HI-FI
13.Adaway
ver.4
Added : zipalign and 4-way reboot menu (Thanks @EMSpilot)
ver.5
Based on T530XXU1AOA1 stock firmware . Features are the same .
Downloads :
Stockless Rom SM-T530 v.5 Ya.Disc Mirror
(based on T530XXU1AOA1 stock firmware)
How to install :
1.Download zip to sd-card
2.Go to recovery
3.Make backup
4.Wipe factory reset
5.Install zip
6.Reboot
Good luck .
Notice
Install with any recovery except TWRP 2850 . After instalation Titanium Backup you can update TWRP
Some screenshots :
Any idea if Stockless would work with the SM-T530NU? I'm pretty sure the only difference is the NU has IR blasters, which I don't use anyway
thisisapoorusernamechoice said:
Any idea if Stockless would work with the SM-T530NU? I'm pretty sure the only difference is the NU has IR blasters, which I don't use anyway
Click to expand...
Click to collapse
I think that you mày to try it . IR blaster will not to work . If attempt will be failure you need to flash your stock firmware again or restore your backup .
And dont forget wipes
thisisapoorusernamechoice said:
Any idea if Stockless would work with the SM-T530NU? I'm pretty sure the only difference is the NU has IR blasters, which I don't use anyway
Click to expand...
Click to collapse
If you try it, don't forget to report back! I have a T530NU too, and I don't use IR.
Which recovery are you using? I haven't flashed any yet. :/
russjr08 said:
If you try it, don't forget to report back! I have a T530NU too, and I don't use IR.
Which recovery are you using? I haven't flashed any yet. :/
Click to expand...
Click to collapse
Sorry been busy so I haven't been able to try it yet.
As for recoveries I've tried both TWRP and Philz touch and they both work ok as far as creating backups, wiping, and installing roms. However both seem to have significant issues as far as restoring a stock nandroid backup. As far as I can tell it's an issue with permissions, it's impossible to move/edit/delete/copy etc. files in a file explorer such as ES, after a nandroid restore. However if you're only looking to be able to flash new roms, either recovery should work OK. Also I can tell you that I was able to successfully install both recoveries' .img file using the flashify app in the play store. I was also able to install the Philz .zip file while in TWRP. Hope that helps
thisisapoorusernamechoice said:
Sorry been busy so I haven't been able to try it yet.
As for recoveries I've tried both TWRP and Philz touch and they both work ok as far as creating backups, wiping, and installing roms. However both seem to have significant issues as far as restoring a stock nandroid backup. As far as I can tell it's an issue with permissions, it's impossible to move/edit/delete/copy etc. files in a file explorer such as ES, after a nandroid restore. However if you're only looking to be able to flash new roms, either recovery should work OK. Also I can tell you that I was able to successfully install both recoveries' .img file using the flashify app in the play store. I was also able to install the Philz .zip file while in TWRP. Hope that helps
Click to expand...
Click to collapse
Hi ,
The problem with internal SD card may be if you do wipe system before restore stock . Only factory reset .
Sd card fix in terminal :
su
restorecon -v -R /data/media
reboot
repey6 said:
Sd card fix in terminal :
su
restorecon -v -R /data/media
reboot
Click to expand...
Click to collapse
That did it!! Thank you so much, sorry the zip file fix did not work for me so I was too pessimistic to try this but it did work :good:
Thanks for this Repey! What are the biggest difference between you build and Promeo build please?
Droidphilev said:
Thanks for this Repey! What are the biggest difference between you build and Promeo build please?
Click to expand...
Click to collapse
Thank you D for reply ,
Promeo123 - odex
My - deodex + init.d support
can anyone give me only the systemui from this rom please
I dont have enough data
thisisapoorusernamechoice said:
Any idea if Stockless would work with the SM-T530NU? I'm pretty sure the only difference is the NU has IR blasters, which I don't use anyway
Click to expand...
Click to collapse
Hi ,
Dear promeo123 made one more firmware for the SM-T530NU based on T530NUUEU1ANK1-XAR .
Look here http://forum.xda-developers.com/showpost.php?p=58279898&postcount=3 .
Try it at first
Can anyone give me system ui please
Dewang rocky said:
Can anyone give me system ui please
Click to expand...
Click to collapse
You may to download systemUI (only it ) on new link .
Folder priv-app .
I tried but but nothing happens after clicking system ui
I will try one more time
Dewang rocky said:
I tried but but nothing happens after clicking system ui
I will try one more time
Click to expand...
Click to collapse
On the right side of this line there is a button to download
Dewang rocky said:
Can anyone give me system ui please
Click to expand...
Click to collapse
SystemUI.apk and SystemUI.odex from odex stock
SystemUI.apk from deodexed stock
SystemUI.apk from stockless
Like the pre rooted rom thogh maybe switch to the free nova launcher since prime thats in the rom is a paid app also maybe add the latest supersu with its icon.
Skickat från min SM-G900F via Tapatalk
Added ver.4 : zipalign and 4-way reboot menu

[theme] enable avengers edition system and TWRP theme

This is the review and installation of theme:
https://youtu.be/_TVZUf7HrIs
Requirements :
1)root access
2) TWRP installed
Steps:
1)Download following kenel and avangers theme enabler zip
2) flash both in recovery and reboot
3) go to settings > display > theme> select avengers theme
4) apply downloaded wallpapers from download link
Thats it
Download :
1)Cramiun kernel or u can use smurf kernel too:
https://forum.xda-developers.com/oneplus-6/development/kernel-cranium-kernel-v1-0-t3822957
Smurf kernel:
https://forum.xda-developers.com/oneplus-6/development/4-9-109-smurfkernel-1-0-0-t3805948
2) avengers theme enabler:
https://nathanchance.me/downloads/kernels/op6/other-zips/
3) avengers wallpaper :
https://drive.google.com/drive/mobile/folders/1JTuL_6ZVcQ8EkpuXXtzuU1z5tNJcVRut
[PAERT 2]Avangers edition TWRP THEME:
TUTORIAL FOR THEME APPLICATION AND AND REVIEW:
https://youtu.be/0g-p15T8HOo
Steps:
Download mat recovery theme from link given below flash it in your recovery.
Then u will get new themed mat recovery.
Now flash any recovery theme and your phone will changes to new recovery theme.
Or after reboot if you want to change theme from file explorer.
Then go to TWRP FOLDER>THEN THEME>THEN CHANGE UI. ZIP name to ui. original. Zip
Now paste any zip theme u downloaded in above folder. Rename it to ui. Zip
And then reboot
If u want to remove all themes then delete all ui.zip from your theme folder and reboot
DOWNLOAD :
1) mat recovery theme:
https://androidfilehost.com/?fid=962021903579498907
2) avengers theme:
DOWNLOAD :https://androidfilehost.com/?fid=890278863836287105
That's not the official Avengers wallpaper.
Check out the attached image. That's the official wallpaper.
If anyone could find that out, that'd be wonderful. Coz I have searched everywhere and couldn't find it.
ManikandanGuru said:
That's not the official Avengers wallpaper.
Check out the attached image. That's the official wallpaper.
If anyone could find that out, that'd be wonderful. Coz I have searched everywhere and couldn't find it.
Click to expand...
Click to collapse
http://imgur.com/NHLwRtX
pankspoo said:
http://imgur.com/NHLwRtX
Click to expand...
Click to collapse
If you still looks closely it's not the same.
I have an Avengers Edition OnePlus 6 so, I'd know it accurately.
Since Android DP3 doesn't have the Avengers theme I miss that wallpaper dearly.
Can we flash this on Stock kernel. Is it necessary to use custom kernel?
ubercool786 said:
Can we flash this on Stock kernel. Is it necessary to use custom kernel?
Click to expand...
Click to collapse
No u need custom kernel as mentioned in description that support avenger theme
I. E Cramiun kernel or smurf kernel
Can i flash the avenger disabler on ob2? I accidently left it on while moving from 5.1.11 and now display settings crashes. Just looking for a fix.
sergiozy6693 said:
Can i flash the avenger disabler on ob2? I accidently left it on while moving from 5.1.11 and now display settings crashes. Just looking for a fix.
Click to expand...
Click to collapse
Yes U can.
But i cants understand its not possible that when u flashed OB2 over oreo then its automatically should gone, are u using theme compatible kernel aslo?
It is gone but i saw something in the logcat that says "theme mode = 3" and im guessing thats avengers theme. So im trying to disable it fully. I tried to flash a kernel that had avengers theme enabled too. But that didnt work. And the link for the disabler is in the op?
sergiozy6693 said:
It is gone but i saw something in the logcat that says "theme mode = 3" and im guessing thats avengers theme. So im trying to disable it fully. I tried to flash a kernel that had avengers theme enabled too. But that didnt work. And the link for the disabler is in the op?
Click to expand...
Click to collapse
If your facing still the same problem then clean install wipe system and install OB2 via twrp
pankspoo said:
If your facing still the same problem then clean install wipe system and install OB2 via twrp
Click to expand...
Click to collapse
Will do thanks!?
pankspoo said:
If your facing still the same problem then clean install wipe system and install OB2 via twrp
Click to expand...
Click to collapse
How do i go about wiping system?.. will it delete internal data? And will it keep twrp? If so.
Do i simply wipe system and install ob2 through twrp?
sergiozy6693 said:
How do i go about wiping system?.. will it delete internal data? And will it keep twrp? If so.
Do i simply wipe system and install ob2 through twrp?
Click to expand...
Click to collapse
yes you can wipe system and install ob2 via twrp.but you will loose all your twrp so simalteneously flash twrp zip after rom flashing, you wonts loose internal data unless u wipe internal sd card but you suerly loose ur apps and setup so keep app backup using titanium back and alwayz keep nandroid backup if something goes wrong
pankspoo said:
yes you can wipe system and install ob2 via twrp.but you will loose all your twrp so simalteneously flash twrp zip after rom flashing, you wonts loose internal data unless u wipe internal sd card but you suerly loose ur apps and setup so keep app backup using titanium back and alwayz keep nandroid backup if something goes wrong
Click to expand...
Click to collapse
Thanks man i tryed it yesterday and i got everything working. Everything works now. And seems smoother then before for some reason.
I tried smurf kernel but it doesn't work on stable pie..while flashing nathanchance zip using blu spark recovery it says unsupported device ..
knox58 said:
I tried smurf kernel but it doesn't work on stable pie..while flashing nathanchance zip using blu spark recovery it says unsupported device ..
Click to expand...
Click to collapse
Smurf kernel is compatible with pie. First flash it then try Nathan chance zip.
If it's not then u cants use Nathan chance theme enabler zip.
It of no use without compatible kernel.
pankspoo said:
Smurf kernel is compatible with pie. First flash it then try Nathan chance zip.
If it's not then u cants use Nathan chance theme enabler zip.
It of no use without compatible kernel.
Click to expand...
Click to collapse
I flashed smurf kernel 2.0.4 gcc8 and then nathanchance enable zip while flashing nathanchance zip its says unsupported device
knox58 said:
I flashed smurf kernel 2.0.4 gcc8 and then nathanchance enable zip while flashing nathanchance zip its says unsupported device
Click to expand...
Click to collapse
May be pie is incompatible for it
pankspoo said:
May be pie is incompatible for it
Click to expand...
Click to collapse
May be....Thanks for those quick response bro!!
that is soo gooood
tanks so much brother

[ROM][10.0]BETA[UNOFFICIAL] PixelExperience [UGGLITE] 2019-12-13

PixelExperience ROM 2019-12-13
Project ended.
This is BETA version, USE STABLE crDroid or GoogleDroid ROMs.
There's no guarantee nothing, don't use it if you don't know what you're doing!
SAVE your DATA!
It is recommended that you use the latest ugglite Xiaomi firmware. (2019.11.05 Global)
Make sure you have a custom recovery installed (TWRP (or clones) is the preferred recovery) My TWRP: LINK
Boot into recovery
Wipe dalvik, system, data, cust (vendor), cache partitions
If your /data partition secured, maybe need format /data.
Flash Rom (sideload or copy any storage)
Flash Magisk Root (Optional)
Reboot (If TWRP warn that there is no system, it doesn't matter, go reboot.)
First boot may take up to 1 minute.
Unfortunately all AOSP-based ROMs are still in the test phase, so we wait for a stable OS.
GAPPS included
DOWNLOAD ROM
Made at viethoang18's request. No additional support. I don't like GAPPS!​
Know bugs: ?
*
Screenshots: LINK
OS source: LINK
ROM OS Version: 10.x Q
ROM Kernel: Linux 3.18.140
ROM info: Q10 system_root partition, Android quota removed (easier to go back to earlier 7.x-9.x ROMs).
Created 2019-12-13 V0 version
Last Updated 2019-12-13
______________________________________________________
Other:
RevengeOS Q10 TWRP backup downloadable in comment section #20 comment. LINK
could you please port revenge os Q
port DU-REX rom please
you need remove flash opengapps optional in pixel experience is just no needed ...
Also impossible to install magisk 20.1 its needed to install latest canary magisk for information ...
it's turn me to fastboot
also twrp not full my screen plz fix it
viethoang18 said:
also twrp not full my screen plz fix it
Click to expand...
Click to collapse
viethoang18 said:
it's turn me to fastboot
Click to expand...
Click to collapse
After I make the final version of the ROM, I install it and when it works I only upload it.
Deleting/formating partitions is important.
TWRP works perfectly for me.
It is recommended that you use the latest ugglite Xiaomi firmware.
I can deal with these after further feedback.
thanks, i will try also can you build more like Evolution X ??
viethoang18 said:
thanks, i will try also can you build more like Evolution X ??
Click to expand...
Click to collapse
These ROMs are all equally bad for the time being, faulty applications, faulty Ui, faulty settings, faulty permissions, etc.
I think unnecessary to try many BETA ROMs for now.
And a lot of unnecessary work.
alright thanks you so much
Hafitz Setya said:
port DU-REX rom please
Click to expand...
Click to collapse
I tried DU-REX.
No messenger in it, I didn't get an SMS today ...
There is no FM radio.
It has GalleryGO but cannot associate it with a contact image... I needed to install another image viewer...
The lights are not working properly. (But this is common in other ROMs.)
Alpha version. But the boot animation is cool...
viethoang18 said:
alright thanks you so much
edit: still goes to fastboot after back Miui with miflash
Click to expand...
Click to collapse
Flash back previous recovery?
szanalmas said:
I tried DU-REX.
No messenger in it, I didn't get an SMS today ...
There is no FM radio.
It has GalleryGO but cannot associate it with a contact image... I needed to install another image viewer...
The lights are not working properly. (But this is common in other ROMs.)
Alpha version. But the boot animation is cool...
Click to expand...
Click to collapse
okey, thanks for you hard work dude
yess
Hafitz Setya said:
okey, thanks for you hard work dude
Click to expand...
Click to collapse
You ask? Packaged?
With Google Photos and Textra Messages have made it quite tolerable. : D
(And with my FMradiofix.)
DU-REX OS
Hafitz Setya said:
okey, thanks for you hard work dude
Click to expand...
Click to collapse
DU-REX OS (TWRP backup) DOWNLOAD
Unzip folder, and copy your phone sdcard or internal storage "/TWRP/BACKUPS/(phone_id)/" folder.
Wipe Data, Cache.
In TWRP -> Restore -> 2019-12-14-DUREX.
Install Textra SMS messages app and Google Photos app if you want messages or contact photos.
Your welcome.
Big +1: In the ROM built-in OpenCamera!
szanalmas said:
DU-REX OS (TWRP backup) DOWNLOAD
Unzip folder, and copy your phone sdcard or internal storage "/TWRP/BACKUPS/(phone_id)/" folder.
Wipe Data, Cache.
In TWRP -> Restore -> 2019-12-14-DUREX.
Install Textra SMS messages app and Google Photos app if you want messages or contact photos.
Your welcome.
Big +1: In the ROM built-in OpenCamera!
Click to expand...
Click to collapse
thanks dude, maybe I'll try tonight, I'm busy now
Please help me, it still go to fastboot
viethoang18 said:
Please help me, it still go to fastboot
Click to expand...
Click to collapse
Which one? Pixel or Durex?
Revenge os 3.0
ahmedhelmy71 said:
could you please port revenge os Q
Click to expand...
Click to collapse
REVENGE OS 3.0 (TWRP backup) DOWNLOAD
Unzip folder, and copy your phone sdcard or internal storage "/TWRP/BACKUPS/(phone_id)/" folder.
Wipe Data, Cache.
In TWRP -> Restore -> 2019-12-16-REVENGEOS.
Install Textra SMS messages app. (Was not SMS notification for me...)
Your welcome.
Screenshots: LINK

TWRP 3.4 and 3.5 for A20

@Topser99 has provided us with some newly modified recoveries.
They all have TWRP 3.4 and also now 3.5
⇨NewUpdate
-update kernel
By : @physwizz
Follow : @ULtimaTe_Pie2
Follow Galaxy_A20_official
System and System_root
Twrp-sm-a20 - Google Drive
drive.google.com
Choose .img you want and flash it from your current recovery onto the recovery slot.
Then reboot into recovery.
Or choose the .tar to flash from odin
You must be aware though that your previous backups will not restore .
You should read this next section carefully.
TWRP recovery Incompatability Issue
There are 2 types of recovery:
Type 1 backs up /system
Type2 backs up /system_root but labels it "system"
Both types work well but you can't backup on one type and restore on the other
To overcome this problem, I suggest that filenames of TWRPs should either contain SYSTEM or SYSTEM_ROOT
Also.
TWRP 3.4 is incompatible with TWRP 3.3 and @Topser had modded to produce TWRP 3.4 for us to use.
So now there are 4 types:
1. TWRP 3.3 SYSTEM
2. TWRP 3.3 SYSTEM_ROOT
3. TWRP 3.4 SYSTEM
4. TWRP 3.4 SYSTEM_ROOT
A backup made with one type will not restore with any of the other 3 types.
Post 2
I can confirm TWRP 3.4 SYSTEM version works correctly (including MTP at recovery level). Funnily enough, I just finished porting the A30 version for myself and came up with an almost identical result. I remove the fstab lines for product image, vendor image and system image just to make it cleaner
Thanks for doing this for all @Topser
Whats the difference between system_root and system ?
So this can be installed over 3.3 aswell ?
Jeremy_J7 said:
Whats the difference between system_root and system ?
So this can be installed over 3.3 aswell ?
Click to expand...
Click to collapse
both work as backups.
you can replace 3.3 with 3.4 but read the 1st post carefully
physwizz said:
both work as backups.
you can replace 3.3 with 3.4 but read the 1st post carefully
Click to expand...
Click to collapse
I see now, its labels it differently , thanks alot, will flash it later today . Thanks Bro ?
physwizz said:
both work as backups.
you can replace 3.3 with 3.4 but read the 1st post carefully
Click to expand...
Click to collapse
I just flashed the new recovery, I tested MTP and its working ? I noticed a new option in settings that allows to unmount system before installing a zip, it was enabled by default, I should disable it right ?
Jeremy_J7 said:
I just flashed the new recovery, I tested MTP and its working ? I noticed a new option in settings that allows to unmount system before installing a zip, it was enabled by default, I should disable it right ?
Click to expand...
Click to collapse
It's the default
Topser99 said:
It's the default
Click to expand...
Click to collapse
So you're saying that it's always been the default in TWRP but now we have the option of turning it on/off. And I should leave it enabled ?
Jeremy_J7 said:
So you're saying that it's always been the default in TWRP but now we have the option of turning it on/off. And I should leave it enabled ?
Click to expand...
Click to collapse
Should think of android 4.4 and supersu
Jeremy_J7 said:
So you're saying that it's always been the default in TWRP but now we have the option of turning it on/off. And I should leave it enabled ?
Click to expand...
Click to collapse
I'd leave it as it is.
Try that and then untick it and try that to see what happens
physwizz said:
I'd leave it as it is.
Try that and then untick it and try that to see what happens
Click to expand...
Click to collapse
Ain't got anything to flash at the moment thou ? Maybe will try when a new version of Edxposed comes up.
Jeremy_J7 said:
Ain't got anything to flash at the moment thou ? Maybe will try when a new version of Edxposed comes up.
Click to expand...
Click to collapse
In my understanding
Twrp_3.3 mount system before installing a zip for supersu =>> system/sbin,bin,xbin
Twrp_3.4 unmount system before installing a zip for magisk =>>/data/adb/magisk
@Topser has updated the files on post 1
You can now choose a TWRP to backup data and storage
Jeremy_J7 said:
I just flashed the new recovery, I tested MTP and its working I noticed a new option in settings that allows to unmount system before installing a zip, it was enabled by default, I should disable it right ?
Click to expand...
Click to collapse
It's disabled by default since most things using recovery work systemlessly. Most packages that use the system mount point will automatically mount system for reading and writing anyway. So there's no need to mess with the toggle.
can i flash this tar file on my a205f
A205FXXU8BTG3
shawal_islam said:
can i flash this tar file on my a205f
A205FXXU8BTG3
Click to expand...
Click to collapse
yes
K I back on the scene again and I have a Galaxy A20 I want to root with TWRP!
Heres what I need to know how to the program that installs TWRP and which 3.4 files do I need?
And how will do the install of TWRP I been off 2yrs I just coming back to the website today?
Sorry if this is hard to follow I will post now for ques and feedback. TIA!
techmanc said:
K I back on the scene again and I have a Galaxy A20 I want to root with TWRP!
Heres what I need to know how to the program that installs TWRP and which 3.4 files do I need?
And how will do the install of TWRP I been off 2yrs I just coming back to the website today?
Sorry if this is hard to follow I will post now for ques and feedback. TIA!
Click to expand...
Click to collapse
what do you want to know about Twrp3.4
Topser99 said:
what do you want to know about Twrp3.4
Click to expand...
Click to collapse
Which Odin and TWRP do I need to install my Galaxy A20 as per my sig!

Categories

Resources