Hi all,
With the risk of this being called a duplicate thread I just want to clarify that I'm in no way asking to port something for me, and I've read the 2 similar threads around, and felt like this should have it's own place.
So, straight to the point, I've been looking to get involved with android porting, and since LOS and AOKP for our device haven't quite filled my cup I was thinking of trying to port something else (trying to not get into much detail here )
Moving on, after searching around XDA and everywhere else, I've found a tuto or two where the process of porting was explained, and being an average user, I went to grab a "Base ROM", (thought the LOS/Stock ones would do, downloaded both)
To my surprise, files mentioned in the tutorials (framework-res.apk, framework.jar, ...) are nowhere to be found.
Finally the question, this just to save me from a reflash,
Am I supposed to install the "Base ROM" to dump /system to my PC?
Or am I perhaps misunderstanding something?
----
PSA: I'll probably find it difficult to get time to work on this (school stuffs) so even if I decide to go on with it, it might take a good while till something comes up.
Also, if there's someone with some experience in porting who'd be so kind to give me some pointers or show some availability to help with bug fixing/porting (not asking for labor, just explanations, in case I need 'em), please PM
Thanks, and sorry for the long post
b0taSs said:
Hi all,
With the risk of this being called a duplicate thread I just want to clarify that I'm in no way asking to port something for me, and I've read the 2 similar threads around, and felt like this should have it's own place.
So, straight to the point, I've been looking to get involved with android porting, and since LOS and AOKP for our device haven't quite filled my cup I was thinking of trying to port something else (trying to not get into much detail here )
Moving on, after searching around XDA and everywhere else, I've found a tuto or two where the process of porting was explained, and being an average user, I went to grab a "Base ROM", (thought the LOS/Stock ones would do, downloaded both)
To my surprise, files mentioned in the tutorials (framework-res.apk, framework.jar, ...) are nowhere to be found.
Finally the question, this just to save me from a reflash,
Am I supposed to install the "Base ROM" to dump /system to my PC?
Or am I perhaps misunderstanding something?
----
PSA: I'll probably find it difficult to get time to work on this (school stuffs) so even if I decide to go on with it, it might take a good while till something comes up.
Also, if there's someone with some experience in porting who'd be so kind to give me some pointers or show some availability to help with bug fixing/porting (not asking for labor, just explanations, in case I need 'em), please PM
Thanks, and sorry for the long post
Click to expand...
Click to collapse
i wouldnt even try to port, its just confusing, files missing, preloader updates which makes you think which one to use, its all really just a mess, you will have better chance of getting something if you build from source, just fork our device, kernel and vendor trees and download a custom rom source of your choosing and build it, i wont say step by step, but i recommend that to download the vendor, device and kernel sources you make the local_manifest.xml so that when you do repo sync it downloads those sources aswell
Ruben Craveiro said:
i wouldnt even try to port, its just confusing, files missing, preloader updates which makes you think which one to use, its all really just a mess, you will have better chance of getting something if you build from source, just fork our device, kernel and vendor trees and download a custom rom source of your choosing and build it, i wont say step by step, but i recommend that to download the vendor, device and kernel sources you make the local_manifest.xml so that when you do repo sync it downloads those sources aswell
Click to expand...
Click to collapse
And here I thought porting would be easier, but yeah, now that you mention that.. :silly:
Aw well, thanks mate :good:
Related
Is there such a guide/tutorial/description?
I am interested in porting ROMs to the G1. I am a total beginner, and I could not find anything useful (except the automatic porting of dsixda's kitchen, what is great btw, but I want to learn how to do it by hand, etc).
Could please someone tell me how to do this, what to copy from original ROM for things to work, etc?
Thank you very much!
It's going to vary from ROM to ROM, depending on what device you are porting from and whether it's Sense/AOSP/etc.
You can get some ideas from a couple of my posts though.
http://forum.xda-developers.com/showthread.php?t=723319
http://forum.xda-developers.com/showthread.php?t=815265
Porting is not generally that hard to do... It's getting everything to work right that's a pain.
Also, look at vendor trees for your device. That will give you a good idea about which proprietary files (drivers, etc.) that need to be replaced.
gnarlyc said:
It's going to vary from ROM to ROM, depending on what device you are porting from and whether it's Sense/AOSP/etc.
You can get some ideas from a couple of my posts though.
http://forum.xda-developers.com/showthread.php?t=723319
http://forum.xda-developers.com/showthread.php?t=815265
Porting is not generally that hard to do... It's getting everything to work right that's a pain.
Also, look at vendor trees for your device. That will give you a good idea about which proprietary files (drivers, etc.) that need to be replaced.
Click to expand...
Click to collapse
This is really great, thanks Gnarlyc... been searching all over for tutorials/etc. I was able to port an N1 ROM to the EVO (using dsixda's kitchen); however sensors + radios failed to work after boot-up; probably missed a couple files/libs. Will look these links for tips. Thanks!
gnarlyc said:
It's going to vary from ROM to ROM, depending on what device you are porting from and whether it's Sense/AOSP/etc.
You can get some ideas from a couple of my posts though.
http://forum.xda-developers.com/showthread.php?t=723319
http://forum.xda-developers.com/showthread.php?t=815265
Porting is not generally that hard to do... It's getting everything to work right that's a pain.
Also, look at vendor trees for your device. That will give you a good idea about which proprietary files (drivers, etc.) that need to be replaced.
Click to expand...
Click to collapse
really nice, finaly a topic where i found more infos than just "use the kitchen and change kernel"
other questions :
how do you know you needed to replace some string values by other ? simply open the original rom for you device and compare, or simply guessing the name ???
Lemme get some things out of the way.. I am a noob. I have searched. I have read some of the results from the search. I am overwhelmed by the 20+ pages of results (lol). I am not 100% sure this is the correct forum for this (not sure where else would be ).. I believe this is one of those things where I need help based on my situation.. Ok, so here I go.
I wish to start porting ICS to my phone. That's my goal. I have general understanding of how linux works, but I do not know much about the android specifics of how they work, or what needs to be modified for this to work. I do not plan to use the kitchen tool as I wish to learn this the hard way. I believe this will help me become more understanding in what I am doing. However, at this point I don't and that's why I'm here. My phone model is irrelevant almost because its prepaid and usually the communities don't even recognize their existence.. at least that's how I feel about it. But I digress. My phone is the zte warp by boost mobile and I am here to learn hopefully the things that will get me started on porting ICS to this phone. I right now believe that the best thing for me to learn is how the android related files work because as it is, I only looked at guides on how linux works and I understand most of it. I'm not sure that's the best thing that will help me port ics, but I'm certain it is important.
Please help me figure out where I should start in learning how to port ICS to my phone basically.
Thanks XDA
anyone? I am quite serious about wanting to do and go into this but I have yet one thread that anyone's ever replied to.. (or post iirc) which puts a damper on me
Snake X said:
Lemme get some things out of the way.. I am a noob. I have searched. I have read some of the results from the search. I am overwhelmed by the 20+ pages of results (lol). I am not 100% sure this is the correct forum for this (not sure where else would be ).. I believe this is one of those things where I need help based on my situation.. Ok, so here I go.
I wish to start porting ICS to my phone. That's my goal. I have general understanding of how linux works, but I do not know much about the android specifics of how they work, or what needs to be modified for this to work. I do not plan to use the kitchen tool as I wish to learn this the hard way. I believe this will help me become more understanding in what I am doing. However, at this point I don't and that's why I'm here. My phone model is irrelevant almost because its prepaid and usually the communities don't even recognize their existence.. at least that's how I feel about it. But I digress. My phone is the zte warp by boost mobile and I am here to learn hopefully the things that will get me started on porting ICS to this phone. I right now believe that the best thing for me to learn is how the android related files work because as it is, I only looked at guides on how linux works and I understand most of it. I'm not sure that's the best thing that will help me port ics, but I'm certain it is important.
Please help me figure out where I should start in learning how to port ICS to my phone basically.
Thanks XDA
Click to expand...
Click to collapse
From my limited knowledge, I think it is a huge task undertaking, you can download Android source code from Google, the hard part will be the device driver development and porting for Linux kernel (and maybe portion of Android). If you are lucky, you can use the existing phone bootloader (or you have to port one). Understanding the inner of the phone (different chip set may need different device driver) will be another challenging task.
by the device driver development, you mean all the libs that go into the phone? Couldn't I just copy/paste the pre-existing libs that are already made for the phone? Also the phone im working with is a bit strange really.. noone has been able to compile the kernel from its source and get it to boot yet.. when it was compiled the zImage was different than that of the stock one.
And yeah, I have downloaded the aosp source.. I just need to know where to start at and the processes involved really
Snake X said:
by the device driver development, you mean all the libs that go into the phone? Couldn't I just copy/paste the pre-existing libs that are already made for the phone? Also the phone im working with is a bit strange really.. noone has been able to compile the kernel from its source and get it to boot yet.. when it was compiled the zImage was different than that of the stock one.
And yeah, I have downloaded the aosp source.. I just need to know where to start at and the processes involved really
Click to expand...
Click to collapse
To answer you question no the drivers and lib files are different for aosp based rooms then they are for the stock OEM from. The first step will be to get a working kernel. Without anything you do will be pointless
I'm somewhat interested in the same thing, and from what I've gathered, you'll need to do these things to begin ROM development:
1. Read every page on the AOSP site and grab a copy of the AOSP source. It probably wouldn't hurt to read the regular Android developer wiki as well.
2. Learn about Linux driver development:
http://lwn.net/Kernel/LDD3/ (this is apparently considered THE BOOK on Linux driver development)
http://www.freesoftwaremagazine.com/articles/drivers_linux
3. Learn pretty much every detail about your phone and its hardware, especially when it comes to how ROMs are installed on it. For example, my phone (the Droid X2) has a locked bootloader, so 2nd init has to be used to boot new ROMs, and this makes it so that we cannot update the kernel.
You can usually find this sort of information on your phone manufacturer's website. Sometimes they even post the source code to their phone's drivers, which is helpful.
4. Look at other ROMs (preferably for your phone) and see how they work. The source code is freely available for most popular ROMs.
For example: CyanogenMod keeps their source code in a public git repository: https://github.com/cyanogenmod
5. Get to work on porting!
I would highly recommend starting with something smaller, however, just as a start. One good jumping-off point is probably this guide: http://forum.xda-developers.com/showthread.php?t=1272270
If any part of this was wrong, or if I left something out, somebody feel free to correct me, I'm still a noob.
Thank you so much for your direction, however,, android kitchen.. im not sure about that because isnt that only ment for htc devices? My phone is made by zte
what device do you even have?
if it's stuck officialy on 2.1 or 2.2 there's no hope that if you even port it that it'll work
its the zte warp from boost mobile (prepaid). Btw if I compile an aosp ics launcher and put that on my phone whats the chances of that working?
edit: it uses 2.3.5
Well Sebastian responded on android forums, apparently zte is very bad at version control with their kernel sources. So when they complete one project, they use the same source for the next project, and what they release could be for anything. Apparently the blade source had the same issues, it took him a while to get them to correct the source
Sent from my N860 using Tapatalk
Yeah I noticed that there were ppl saying there were things similar but I'm not sure what will work or what won't.. guess its time to start a petition on zte to release the source code lol
edit: seems like zte's bein a bad company and violated the GNU GPL license for not providing a complete source code.. I compiled an email and sent it to someone who can proof read it and send it to the right person for this kinda thing.. danggit zte
Hi all,
i want to start with AOSP 4.2 for our SGS3 i9300 - is anybody interested to develop and publish a AOSP based rom with me?
I'm a real application developer (C,C++,JAVA,PHP,MySQL,some Oracle PLSQL) and now its some cold out - i have time to do
some nice things
I think a team of 2 or 3 developers should be enough to develop on this rom, as we can use a lot from AOSP 4.1.2
### EDIT
As long as no one has found to help, here a short description of current progress:
- Code is pure based on AOSP 4.2 but some snippets of CyanogenMod to bring up hardware (camera,graphics,audio)
- Device is bootable (no other boot.img required anymore)
- Bootanimation is working
- Mount of partitions is working
- Deodexing is working
- adb, debuggerd and root access is working
Not working: a lot
- Graphic not working perfect, needs a kernel patch or a working gralloc/hwcomposer/hwconverter to work without laggy PMEM)
- Camera can not be activated due to a missing function call (undefined reference, maybe it can be solved with a newer driver)
- Audio: missing speaker device (Code have to reworked to work with stagefright and tinyalsa libs)
- USB/internal SDCard: cant be mounted (error message sounds like the device is mounted twice, have to find the error in init process)
- RIL not working (Java file from CM10 have to be integrated in frameworks/opt/telephony)
Currently, i'm working on the Graphic problem and USB part to bring up the device to a stable UI
Way to go man. Good luck to you!
Good luck ...!! Im waiting
Sent from my GT-I9300 using xda premium
Good evening,
Well how have you imagined that? Do you have build something like that before or would this be your first attempts to build up a rom from scratch? Do you know what's all necessary to contribute for that?
I would try to help you, but I have clearly to say that I haven't done anything like this before. I'm in the last term of my study of technical computer sciences, working in a company as application programmer for C/C++ and Java(Android). Due to my studies I have also some knowledge about hardware programming, down to read/writing some code in assembler. I would be interested to this if I get introduced to the topic and some help with the necessary tool chain wouldn't hurt too ^^.
greetings
hop3l3ss1990 said:
Good evening,
Well how have you imagined that? Do you have build something like that before or would this be your first attempts to build up a rom from scratch? Do you know what's all necessary to contribute for that?
I would try to help you, but I have clearly to say that I haven't done anything like this before. I'm in the last term of my study of technical computer sciences, working in a company as application programmer for C/C++ and Java(Android). Due to my studies I have also some knowledge about hardware programming, down to read/writing some code in assembler. I would be interested to this if I get introduced to the topic and some help with the necessary tool chain wouldn't hurt too ^^.
greetings
Click to expand...
Click to collapse
I have successfully built a rom in year 2010 for the LG-P500 device, based on CM7 and modified it in a strange way, so i included a lot of nice things
written from scratch - this rom was a unicate ... later, i developed the "Phoenix Launcher" for Gingerbread enabled devices, but its development is currently
frozen because its strange to support every or almost every device with a bugless launcher. In the last months i learned a lot about android and have to re-think about
what i'm able to do, and what i want to do. In the summer of 2011 i bought my SGS3, the first thing i was doing was to remove that samsung crap from my device and
have installed AOKP. So now it's time to do my own thing again - i want to have AOSP as i think for me its the best Android solution for myself and want to publish it
to other users who think "thats ok for me" too
In short, it doesnt matter if its your first rom - its enough if you know about basic things like "how is android doing all that nice things", "how to debug code", "how to fix
some bugs (even strange bugs)" and some experience with git and github. All other you can learn in a very short time - i've learned the most of things with try & error
andy572 said:
I have successfully built a rom in year 2010 for the LG-P500 device, based on CM7 and modified it in a strange way, so i included a lot of nice things
written from scratch - this rom was a unicate ... later, i developed the "Phoenix Launcher" for Gingerbread enabled devices, but its development is currently
frozen because its strange to support every or almost every device with a bugless launcher. In the last months i learned a lot about android and have to re-think about
what i'm able to do, and what i want to do. In the summer of 2011 i bought my SGS3, the first thing i was doing was to remove that samsung crap from my device and
have installed AOKP. So now it's time to do my own thing again - i want to have AOSP as i think for me its the best Android solution for myself and want to publish it
to other users who think "thats ok for me" too
In short, it doesnt matter if its your first rom - its enough if you know about basic things like "how is android doing all that nice things", "how to debug code", "how to fix
some bugs (even strange bugs)" and some experience with git and github. All other you can learn in a very short time - i've learned the most of things with try & error
Click to expand...
Click to collapse
This all sounds interesting for me and yes I like the idea of developing a own clean rom with some cool additional stuff, too. But what would be the first steps to a new rom? Have you begun with all the administration stuff like setting up a new gitrepo, make a to do list etc...?
I think Code debugging and writing some new stuff wouldn't be a problem for me but what are you meaning excactly with "how is android doing all that nice things"? How it build up, deep level architecture? Well, I know how the "normal" Linux system is working, how modules are getting loaded into the kernel... But how this is correctly working on android I have to learn at first and if there is a chance to do that I would do it
Currently on my S3 is SlimBean and till that there is still no update to 4.2 I'm happy with it, but exploring something new would be pretty cool
Do you have an IRC chat room or something like that? I've to go offline now, my girlfriend wants more attention.^^ But If you want, I' m willing to try to contribute to the rom
PS. I'm sorry for my bad English and hope its understandable, but outside from here you can talk to me in German ^^
If you want to help the AOSP experience on our phones the best place to do it is with the CyanogenMod guys. You'll find pretty much everything based on AOSP (including people that port Vanilla AOSP and AOKP) is using a CM kernel.
They're likely working on the merge now in terms of getting CM10.1 out (with Android 4.2) but most of our CM guys are pretty burned out on working with Samsung's subpar reference material to get basic stuff working (mostly HWC). If you think you could help with this, this would be provide a massive boost to the whole community that want to run these phones on an AOSP based ROM and they would be very grateful.
Gotta warn you though it sounds like it'll be an uphill struggle to get the rest of the stuff working right; unless Samsung release some decent sources for HWC.
Currently i have only downloaded the AOSP sources and started to integrate most of the configs. Currently it cant compile because AOSP is not AOKP/CM10
where i got the device and vendor directories, so i have to make some changes in the basic system. if it's compiling to the end, i open a fresh github account
and upload all my modifications. The compile process stops currently on audio,OMX plugins, graphics and camera - most of that are small pieces of changes
i have to make - i think, tomorrow (its monday in germany here) i can upload all and then we can start to develop on
andy572 said:
Currently i have only downloaded the AOSP sources and started to integrate most of the configs. Currently it cant compile because AOSP is not AOKP/CM10
where i got the device and vendor directories, so i have to make some changes in the basic system. if it's compiling to the end, i open a fresh github account
and upload all my modifications. The compile process stops currently on audio,OMX plugins, graphics and camera - most of that are small pieces of changes
i have to make - i think, tomorrow (its monday in germany here) i can upload all and then we can start to develop on
Click to expand...
Click to collapse
Wish i could help (just started learning JAVA ) ! gl with this awesome project
Nice to see you here, I remember you from the P500 forums.
Xda user krarvind should be able to give you some useful hints, you will have to contact him through the RD forum as his pm is locked down, or I could possibly put him in contact with you
slaphead20 said:
Xda user krarvind should be able to give you some useful hints, you will have to contact him through the RD forum as his pm is locked down, or I could possibly put him in contact with you
Click to expand...
Click to collapse
Thank you, it would be nice if you can contact him
andy572 said:
Thank you, it would be nice if you can contact him
Click to expand...
Click to collapse
Ok, will mention it to him
andy572 said:
Currently i have only downloaded the AOSP sources and started to integrate most of the configs. Currently it cant compile because AOSP is not AOKP/CM10
where i got the device and vendor directories, so i have to make some changes in the basic system. if it's compiling to the end, i open a fresh github account
and upload all my modifications. The compile process stops currently on audio,OMX plugins, graphics and camera - most of that are small pieces of changes
i have to make - i think, tomorrow (its monday in germany here) i can upload all and then we can start to develop on
Click to expand...
Click to collapse
How it's going forward?
Maybe it could be useful to publish the github link when it's ready and some more information like staus, on first post
In the next days I have some trouble with my exams ( in two weeks I'm completely finished with my studies ^^) but I think if there is something to do I'll find some time to work on.
Good Luck Dude~
I haven't tried AOSP yet.
Hope someday i can give it a go.:silly:
hop3l3ss1990 said:
How it's going forward?
Maybe it could be useful to publish the github link when it's ready and some more information like staus, on first post
In the next days I have some trouble with my exams ( in two weeks I'm completely finished with my studies ^^) but I think if there is something to do I'll find some time to work on.
Click to expand...
Click to collapse
current state:
- patched android/build so we can compile the kernel within the main compile process
- patched android/build main.mk file so we can use OpenJDK or Oracle JDK
- added android/vendor/aokp and android/vendor/samsung tree from AOKP (its the most useful directory structure)
- added android/hardware from AOKP so we have all that Exynos things that are needed, even by AOSP
- modified android/frameworks/native/include so a OMX Plugin header can be found
- modified android/libhardware and patched gralloc module
currently it compiles to the Webkit library, most of all apps, libs and binaries are building without errors - the next problem
to solve is the PRODUCT_COPY_FILES ****: nothing of proprietary files are copied to the android/out directory, seems like
a bug in android/build too.
For only 2 days trying to compile to the end without errors its a very good cut
here we go: it compiles to the end and a flashable "JOP40" zip could be created
tryed to flash, but it gives errors in CWM: have to remove the recovery folder and the recovery.sh file from etc folder in the ota zip file, but it doesnt boot up - got a black screen only.
do we need a new or patched kernel instead the CM10 smdk421x one?
Well does it have all the closed source libraries fron the phone? If not, it wont boot. Dont think i am calling you stupid, you obviously know what you are doing, but maybe you forgot. Idk. Check that. Try running a log cat and debug that.
Sent from my GT-I9300 using xda premium
b-eock said:
Well does it have all the closed source libraries fron the phone? If not, it wont boot. Dont think i am calling you stupid, you obviously know what you are doing, but maybe you forgot. Idk. Check that. Try running a log cat and debug that.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for the hint, yes i have all files included - i cant connect to adb, i see only small colored point on the top left side and a sensor
is red blinking (the one to the right of the speaker.
That would be the proximity sensor near the top front speaker. Cant connect, adb binary in /system/bin or xbin?
Sent from my GT-I9300 using xda premium
Hello all,
I'm trying hard to figure out how one goes about compiling Android JB AOSP (4.1.2_r2.1) platform for the samsung galaxy s2 (GT-I9100M), with the source code that samsung gives you?
I've setup ubuntu 14, and I see how I can run . build/envsetup.sh, and then lunch.
I get all the options to build, and I see where the saumsung scripts are located, in device/samsung.
I've downloaded the open source file GT-I9100M_BMC_JB_Opensource.zip, and compiled the Kernel.
Now its time to build the platform. I see the folder structure, but I see no instructions.
When I unzip the Platform, I see build, external, vendor, and device, which has the folder "smdk_common".
If I put all files in the corisponding locations within the AOSP, I get errors, as there's only a folder "alsa-lib". (sound drivers).
And if I were to compare what's in here to whats in the AOSP device/samsung folders, there's lots more info.
Do I need to copy files from the default AOSP device/samsung folders and modify to suite my needs or?
Can anyone point me to how-tos? I've been trying to figure this out for days!
I see a lot of how tos on building with existing ROMS, and using kitchen, etc.
But I just want to build samsung from scratch FIRST...
OK, so doing a lot more research, both here and google, I obviously need to create a device tree OFF of the files that samsung has released to everyone. Surely someone has done this already?
I see there are a few GIT repositories that have device trees, but they are based upon existing files, etc.
I'm looking to find a device tree that has all the basics, OR a "template" one i can try and work with samsungs...
technobuddha said:
OK, so doing a lot more research, both here and google, I obviously need to create a device tree OFF of the files that samsung has released to everyone. Surely someone has done this already?
I see there are a few GIT repositories that have device trees, but they are based upon existing files, etc.
I'm looking to find a device tree that has all the basics, OR a "template" one i can try and work with samsungs...
Click to expand...
Click to collapse
Hi,
did you succeeded in your approach to build a device tree with the Samsung-opensource-files? if yes then I'll be very interested in the way you do it as I'm on the same status for a Samsung device which has absolutely no support in the hole internet (except one thread here in XDA
BR
SP
No I didn't.
and I got no help what so ever from the people here at xda-developers.
I even approached some of the people who compile the roms, and got no response from them.
I suspect the only help you'll ever get from these forums is if you ask for help from EXISTING roms,
or you're an "existing" developer that has years of experience.
this place is not for new developers at all.
a lot of brown nosing going on here..
good luck in your search!
SolarPlexus said:
Hi,
did you succeeded in your approach to build a device tree with the Samsung-opensource-files? if yes then I'll be very interested in the way you do it as I'm on the same status for a Samsung device which has absolutely no support in the hole internet (except one thread here in XDA
BR
SP
Click to expand...
Click to collapse
technobuddha said:
No I didn't.
and I got no help what so ever from the people here at xda-developers.
I even approached some of the people who compile the roms, and got no response from them.
I suspect the only help you'll ever get from these forums is if you ask for help from EXISTING roms,
or you're an "existing" developer that has years of experience.
this place is not for new developers at all.
a lot of brown nosing going on here..
good luck in your search!
Click to expand...
Click to collapse
OK, thanks for your response. Thats also my experiance more ore less I have found (with some exceptions which really try to help).
So I'll try to work on it, and if I succseed, I'll make a guide... maybe it will help then others
BR
SP
what phone is it?
and yea, if you need any help,just ask me.
SolarPlexus said:
OK, thanks for your response. Thats also my experiance more ore less I have found (with some exceptions which really try to help).
So I'll try to work on it, and if I succseed, I'll make a guide... maybe it will help then others
BR
SP
Click to expand...
Click to collapse
Its the Samsung sg-i8200 (s3 mini value edition)
The previous phone was supported very well (i8190) but the i8200 has a complete new hardwarebase and its really garbage...
send with my Oneplus One (bacon) SlimKat Tapatalk
Okay, First of all, I know this is the incorrect place for a "development" thread, But I am currently unable to post in the correct area.. So here is the second best place.
I've had an idea. Since sadly I am gonna be giving back the Samsung Note 2 (Friend let me borrow it) I have to do something with the new Umi eMax I have.. Its a great potential phone but MEDIATEK wont freaking let us have the source code... So, Why not pull it off a rom? You can easily download something like ColorOS, Get the kernel, and extract the Source code, Am I not right?
I am wanting to do this because Umi has been sitting around barely doing jack trying to get the new 5.0 android up and running.. So installing CM 12.1 would be great!
This is probably totally impossible.. as I am a beginner at this kinda stuff, But, would this idea work or not?
I have the build.prop file if anyone wants to take a look at it.. Though we probably all know it runs off the MT6752.
So, Does anyone have any ideas? Or am I just getting completely over confident on this?
Trying to get 10 posts....