Hello everyone,
I read many useful information’s about this watch here on forum, however didn’t find solution for my case. I got a Xiaomi Amazfit. The watch is not charging or turning on. It is possible to connect it via USB cable to a Windows machine, the device stays as "unrecognized". My theory is that the ROM is hardly broken.
Here is my question: Is there a method to flash the watch via flashtool (or similar). All tutorials require the watch to be able to go to fastboot, and this can’t be done in this case. I can’t connect this as adb device also. I have done several times a flash procedure on phones that could not be turned on. Hope You can help me
Best regards Daniel
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
silver-alx said:
https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
Click to expand...
Click to collapse
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
jcyaoo said:
For the no charging part, make sure you clean the metal pins and the small hole slot on the back. Sometimes there is some build inside the small hole slot that prevents the pins touching the charger.
Click to expand...
Click to collapse
I already tried this. As i sead. I get the device detected on windows (unknown device). I presume someone tried to flash it on the past. I look for a way to copy software to it. Its not turning on (blackacrean).
Any ideas?
kantor_d said:
Thank you i know thiS doscission. Mine is not going to show anything on the screan. Unable to go to fastboot...
Click to expand...
Click to collapse
Look at the end of the thread
I disasembled the base Nd found lut thats 2 Pina where demaged. Its nowy functional but like i told you- its not turning on. Justyna this USB dvice in Windows is showing up (unknown device...)
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
kantor_d said:
Hey. I read all the informations on the sugested topic. I got all images for flashing. I think there od an issue with USB conection. My watch showes up after conecting to USB. Therefore the information od "unrecognized" and "not working corectly". I tried to update drivers, and it refuses to do that - the driver is already uptodate.
Im runing windows on mode that allows instalation of unsigned drivers....
Sugestions?
Click to expand...
Click to collapse
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
kantor_d said:
silver-alx said:
If you've got a fully erased watch you have to install driver manually by selecting driver inf file.[/
Thanks for advice. When I try to install the manuały (left clock on inf->install I get error: this inc file iż not supportu g this methods od instalation;/
Click to expand...
Click to collapse
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
silver-alx said:
kantor_d said:
No left click. You have to choose update driver in the device manager and then manually select your driver.
Click to expand...
Click to collapse
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
Fix?
Did you fix it? And how?
kantor_d said:
silver-alx said:
Thank You for help. I cant install any drivers to it. The device seems broken. As stated before: the device apears as unknown/broken. Cant install any driver for it...
Click to expand...
Click to collapse
I am with the same problem, only that my nor as unknown device it appears, simply connect in the pc and it does not change anything, it was after a flash that it erased and it did not return more
Click to expand...
Click to collapse
As I had had the same problem, I'll share my mysterious experiences. After I used pace for 1 month it become dead but while keep pushing power button, the white flash appear and then off. I changed the wall adaptor and then the watch revived.
For several days ago the watch gone dead and no white flash on when pushed power on 2 secs. anymore. I tried to change adaptor but nothing happen. I tried to clean the contact of both watch and ring, but it still dead.
Finally I switched the power cord from samsung mobile wire to Blackberry cord, it resurrected.
So I suggest you all to try changing the charging system may solve this problem.
Related
I juss got my Verizon Note 2, and was about to move some music and videos on it from my PC, but I ran into a strange issue. At first, when I plugged in my phone to my computer (Windows 8), Windows recognized the device, but no matter what mode I put it in, it never showed up in Windows Explorer. So, I tried downloading the Galaxy Note 2 Toolkit from XDA, but was unable to install it because it has yet to add support for the Verizon Note 2. So, I tried installing Kies, which installed my phone's driver, but won't actually recognize the device. When I look in Windows' device manager, I found the device was found under the name "SAMSUNG_Android", and had a yellow caution symbol next to it, and had the following text in the device status box:
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Click to expand...
Click to collapse
Any ideas on what to do?
P.S. I do have a 32GB microSD in the phone, in addition to the internal 16GB, but I have tried accessing the phone with and without the card installed.
lisalover1 said:
I juss got my Verizon Note 2, and was about to move some music and videos on it from my PC, but I ran into a strange issue. At first, when I plugged in my phone to my computer (Windows 8), Windows recognized the device, but no matter what mode I put it in, it never showed up in Windows Explorer. So, I tried downloading the Galaxy Note 2 Toolkit from XDA, but was unable to install it because it has yet to add support for the Verizon Note 2. So, I tried installing Kies, which installed my phone's driver, but won't actually recognize the device. When I look in Windows' device manager, I found the device was found under the name "SAMSUNG_Android", and had a yellow caution symbol next to it, and had the following text in the device status box:
Any ideas on what to do?
P.S. I do have a 32GB microSD in the phone, in addition to the internal 16GB, but I have tried accessing the phone with and without the card installed.
Click to expand...
Click to collapse
Try going into settings, about phone, tap build number 7 times, you are now a developer, back out to the main settings, go into developer options, enable usb debugging. Did that work?
drumdestroyer said:
Try going into settings, about phone, tap build number 7 times, you are now a developer, back out to the main settings, go into developer options, enable usb debugging. Did that work?
Click to expand...
Click to collapse
It was already enabled for some reason. Huh. Well, it's still not working.
I couldn't access my phone on my computer either it ended up being that I had to use the stock cable that came with the phone instead of the ones I bought off ebay
Sent from my SCH-I605 using Tapatalk 2
I'm having the same problem and neither the stock cable nor the cables from my GNex work. I have downloaded the Kies, deleted, re installed it numerous times with no luck. Also an aside, do the phones all come with a white cable and plug even when the phone is Gray?
Nevermind.
Make sure when you guys plug it into your pc that when you slide the notification bar down and it says conncected as installer you have to click that and check the box beside MTP. That solved my issue.
Sent From VZW Galaxy Note 2
Has anyone successfully gotten Kies to work? I'm on a MacBook Pro with no luck so far. Switched over to Windows and still no dice. So has Verizon just completely blocked us from using Kies???
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
SwiftLegend said:
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
Click to expand...
Click to collapse
What's the Toolkit Option?
i had the same problem and had to use the stock cable for it,other usb cables would only charge from the computer
fluidj said:
What's the Toolkit Option?
Click to expand...
Click to collapse
"Install Samsung Drivers" it's #1 I think.
s10sdeville said:
i had the same problem and had to use the stock cable for it,other usb cables would only charge from the computer
Click to expand...
Click to collapse
The stock cable is the only one I have and use.
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
SwiftLegend said:
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
Click to expand...
Click to collapse
Are you on a Mac or a PC?
PC
solution
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Thank You!!! Thank You!!!!
[/COLOR]
yokme said:
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Click to expand...
Click to collapse
Thank You Yokme!!! This worked for me. I have looked all over the web and this advice was the only thing that worked for me. God Bless You!!! :laugh:
yokme said:
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Click to expand...
Click to collapse
BRILLIANT! Just wasted an hour trying other options, this should be a sticky!
Rockin_Zombie said:
BRILLIANT! Just wasted an hour trying other options, this should be a sticky!
Click to expand...
Click to collapse
The code *#7248# isn't working for me. I type it into the dailer but nothing happens. Help?
manoosie said:
The code *#7248# isn't working for me. I type it into the dailer but nothing happens. Help?
Click to expand...
Click to collapse
Its 7284
Rockin_Zombie said:
Its 7284
Click to expand...
Click to collapse
Whoops sorry. I typed it wrong. Unfortunately, the right number still isn't working.
today sammobile upload the new jb for sgs2 so i take my phone and go to -philz cmw- and do a full wipe with format to all the file in {mounts and storage} -like this i prepare my s2 to flash a new rom - everthing was ok but when go to download mode and connect the phone to pc and open odin .. nothing happen .. please help
rabea-abo-awad said:
today sammobile upload the new jb for sgs2 so i take my phone and go to -philz cmw- and do a full wipe with format to all the file in {mounts and storage} -like this i prepare my s2 to flash a new rom - everthing was ok but when go to download mode and connect the phone to pc and open odin .. nothing happen .. please help
Click to expand...
Click to collapse
Have you installed the Kies drivers on your computer? I'm not 100% sure, but I think you may need USB Debugging enabled too. Try these and then try again. Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Do you have Samsung Kies and all its necessary drivers installed?
*EDIT* Sorry, it seems like i didn't see your comment.
WardenBerret said:
Do you have Samsung Kies and all its necessary drivers installed?
*EDIT* Sorry, it seems like i didn't see your comment.
Click to expand...
Click to collapse
No problem mate, we posted at the exact same time! I see we think alike anyway.
??
themadba said:
Have you installed the Kies drivers on your computer? I'm not 100% sure, but I think you may need USB Debugging enabled too. Try these and then try again. Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Click to expand...
Click to collapse
i have install kies Diligently nothing happend .. look in the pic
rabea-abo-awad said:
i have install kies Diligently nothing happend .. look in the pic
Click to expand...
Click to collapse
Ok, try these steps I found on Microsoft's support website:
As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.
You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:
1. Click Start, and then click Control Panel.
2. Click System and Maintenance, click System, and then click Device Manager.
* Note * If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.
4. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If you still face the same issue then you may check for the updated USB device drivers using windows update.
no luck
themadba said:
Ok, try these steps I found on Microsoft's support website:
As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.
You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:
1. Click Start, and then click Control Panel.
2. Click System and Maintenance, click System, and then click Device Manager.
* Note * If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.
4. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If you still face the same issue then you may check for the updated USB device drivers using windows update.
Click to expand...
Click to collapse
when i restart the pc and connect the phone thats what happend
rabea-abo-awad said:
when i restart the pc and connect the phone thats what happend
Click to expand...
Click to collapse
Try a different Micro-USB cable if possible, and in different USB ports in your computer.
Also try this:
1. Hold your phone and look at the micro USB connector on the bottom edge of your phone.
2. You will see a "tongue" inside the USB port.
3. Put something "non metalic" (I used a flat wooden toothpick) in the port. Gently, lift up the "tongue". I used a twirling motion on my toothpick to raise the tongue up a little bit. Don't go PRYING it up, just be gentle because you don't want to break your toothpick inside the phone or break the tongue.
no luck
themadba said:
Try a different Micro-USB cable if possible, and in different USB ports in your computer.
Click to expand...
Click to collapse
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
rabea-abo-awad said:
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
Click to expand...
Click to collapse
HERE YOU GO: http://forum.xda-developers.com/showthread.php?t=961956/
Just download the drivers instead of waiting for Windows to find them.
nothing happend
themadba said:
What do you mean in your original post that nothing happens in Odin? If you have Kies installed and the processes killed in the Task Manager, and your phone in download mode, just put your ROM in the PDA section of Odin, and click start. Does it fail, or does absolutely nothing happen?
Click to expand...
Click to collapse
nothing happend on odin >> after i go to download mode and connect the phone to pc notthing happend even the pc Did not recognize him and make a sound like when we connect a usb
rabea-abo-awad said:
nothing happend on odin >> after i go to download mode and connect the phone to pc notthing happend even the pc Did not recognize him and make a sound like when we connect a usb
Click to expand...
Click to collapse
Maybe you didn't see my changed post on the last page:
HERE YOU GO: http://forum.xda-developers.com/showthread.php?t=961956/
Just download the drivers instead of waiting for Windows to find them!
ok
rabea-abo-awad said:
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
Click to expand...
Click to collapse
ok just a sec
This maybe?
Open Task manager and kill Kies
If you don't know, follow these steps:
·Open Task manager, CTRL+SHIFT+ESC
·Go to "Processes" tab
·Select "Kies.exe" and click on "End process" located on the bottom right of that same window
·Repeat the previous step for "KiesAirMessage.exe" and "KiesPDLR.exe"
"People aren't lazy, people have impotent goals and therefore are not inspired by their impotent goals."
sorry sir
suenoromis said:
Open Task manager and kill Kies
If you don't know, follow these steps:
·Open Task manager, CTRL+SHIFT+ESC
·Go to "Processes" tab
·Select "Kies.exe" and click on "End process" located on the bottom right of that same window
·Repeat the previous step for "KiesAirMessage.exe" and "KiesPDLR.exe"
"People aren't lazy, people have impotent goals and therefore are not inspired by their impotent goals."
Click to expand...
Click to collapse
i think that the problem in the phone himself i tried all of your Methods nothing changed thx for your time
rabea-abo-awad said:
i think that the problem in the phone himself i tried all of your Methods nothing changed thx for your time
Click to expand...
Click to collapse
Did you try install the drivers I linked you to? It clearly isn't the phone it is your computer not finding the drivers! The previous poster suggested something I suggested ages ago and you thank him for that post, I have posted like 5 responses and you keep responding that nothing is working, and haven't thanked me for anything. I'll let you figure it out yourself, I'm done.
Just to refresh your memory, that was the second post: Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
thanks again
themadba said:
Did you try install the drivers I linked you to? It clearly isn't the phone it is your computer not finding the drivers! The previous poster suggested something I suggested ages ago and you thank him for that post, I have posted like 5 responses and you keep responding that nothing is working, and haven't thanked me for anything. I'll let you figure it out yourself, I'm done.
Just to refresh your memory, that was the second post: Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Click to expand...
Click to collapse
thanks again .. the info you have give it to me is so helpful i will try it again but Later cause i have to sleep no Tomorrow thx alot
rabea-abo-awad said:
thanks again .. the info you have give it to me is so helpful i will try it again but Later cause i have to sleep no Tomorrow thx alot
Click to expand...
Click to collapse
Might wanna try another computer.
Samsung usb cable or generic?
gastonw said:
Might wanna try another computer.
Samsung usb cable or generic?
Click to expand...
Click to collapse
I tried alots of cables nothing happened .. but I will try another computer today .. i hope this will work
good luck.
Sent from the little guy
Okay guys ive tried really bad to not create a new thread bout it but i need help
ive searched for every single thread about usb problems on l9 but neither one helped
tried installing lg drivers new/old ones,installin LG Suite restarting pc/phone but still gettin same error
The problem is when i plug my usb cable in pc then phone ive get error (USB Device not recognized)
(USB Device not recognized) , and phone only start to charging ://
Sometimes it starts to download some drivers but it always get error on some MTP driver ://
I just want to root my phone badly
thanks in advance
karisha91 said:
Okay guys ive tried really bad to not create a new thread bout it but i need help
ive searched for every single thread about usb problems on l9 but neither one helped
tried installing lg drivers new/old ones,installin LG Suite restarting pc/phone but still gettin same error
The problem is when i plug my usb cable in pc then phone ive get error (USB Device not recognized)
(USB Device not recognized) , and phone only start to charging ://
Sometimes it starts to download some drivers but it always get error on some MTP driver ://
I just want to root my phone badly
thanks in advance
Click to expand...
Click to collapse
Try booting computer into safe mode and see what happens.
kevev said:
Try booting computer into safe mode and see what happens.
Click to expand...
Click to collapse
ive tried still gettin USB Device not recognized :// and starts chargin
only one time i connected my phone with usb i think thats the first time when i bought phone few days ago and that was last time
is it PC problem or phone?
please help )
karisha91 said:
ive tried still gettin USB Device not recognized :// and starts chargin
only one time i connected my phone with usb i think thats the first time when i bought phone few days ago and that was last time
is it PC problem or phone?
please help )
Click to expand...
Click to collapse
Hard to tell. Check the device manager. You may need to manually select the driver that the device uses. Also, try another computer.
kevev said:
Hard to tell. Check the device manager. You may need to manually select the driver that the device uses. Also, try another computer.
Click to expand...
Click to collapse
ill try another pc ,but thanks ,if some find out a solution post it thanks )
im looking forward it
karisha91 said:
Okay guys ive tried really bad to not create a new thread bout it but i need help
ive searched for every single thread about usb problems on l9 but neither one helped
tried installing lg drivers new/old ones,installin LG Suite restarting pc/phone but still gettin same error
The problem is when i plug my usb cable in pc then phone ive get error (USB Device not recognized)
(USB Device not recognized) , and phone only start to charging ://
Sometimes it starts to download some drivers but it always get error on some MTP driver ://
I just want to root my phone badly
thanks in advance
Click to expand...
Click to collapse
I am not sure, but have you tried connecting directly to the pc at backside usb? the usb on motherboard? well the symptoms are exactly same when you put on front usb port on pc.
I hope you are using original cable. Sometimes bad and lengthy cables do loss signals and this happens. Voltage passes but not the data making it undetectable. feedback.
cmahendra said:
I am not sure, but have you tried connecting directly to the pc at backside usb? the usb on motherboard? well the symptoms are exactly same when you put on front usb port on pc.
I hope you are using original cable. Sometimes bad and lengthy cables do loss signals and this happens. Voltage passes but not the data making it undetectable. feedback.
Click to expand...
Click to collapse
tried but nothing :/ windows cant install driver ,guess no root for me (
Have you got Windows Media Player? If not install media feature pack.
Hello All
I'm New in Android World -_-
Then , I Bought S Duos , Worked Very Well , For 1 Year
Then , I Put It On a desktop PC With USB Cable
Then , I Tried To Charge IT But It Doesn't Charge With The Charger
I Tried The USB Cable , IT's Charging 100% Well
I Thought It Fixed AND I put It In The Charger Again With No Response UNTIL I Found That Its Charging But Without The Charging Sign
What is The Problem ??
How To Fix It ??
elza3ym said:
Hello All
I'm New in Android World -_-
Then , I Bought S Duos , Worked Very Well , For 1 Year
Then , I Put It On a desktop PC With USB Cable
Then , I Tried To Charge IT But It Doesn't Charge With The Charger
I Tried The USB Cable , IT's Charging 100% Well
I Thought It Fixed AND I put It In The Charger Again With No Response UNTIL I Found That Its Charging But Without The Charging Sign
What is The Problem ??
How To Fix It ??
Click to expand...
Click to collapse
i think its only socket problem
meqns hardware problem
Try this method!
If you think it is a software problem, try this:
Source: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Duos/GT-S7562
Code:
Recovery Mode
Recovery mode can be entered by switching the device off and pressing the following buttons; VOL UP + VOL DOWN + HOME + POWER
When the phone vibrates let go of the buttons.
Note: It can take several attempts to enter recovery mode, so do not give up immediately!
After entering recovery mode, wipe the phone but beware, it will delete all the data in the internal memory. So take a backup of all your data, contacts, messages, before you do this.
After you perform wipe, reboot the phone. It will take longer than usual but after that you will be on the screen.
You can use your phone as a new phone and try charging again.
Press thanks if I have helped!
#Su said:
If you think it is a software problem, try this:
Source: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Duos/GT-S7562
Code:
Recovery Mode
Recovery mode can be entered by switching the device off and pressing the following buttons; VOL UP + VOL DOWN + HOME + POWER
When the phone vibrates let go of the buttons.
Note: It can take several attempts to enter recovery mode, so do not give up immediately!
After entering recovery mode, wipe the phone but beware, it will delete all the data in the internal memory. So take a backup of all your data, contacts, messages, before you do this.
After you perform wipe, reboot the phone. It will take longer than usual but after that you will be on the screen.
You can use your phone as a new phone and try charging again.
Press thanks if I have helped!
Click to expand...
Click to collapse
I Already Tried But With No Result
If the device is not charging properly and you know for certain that it is not an issue with the cable/charging block/etc, then most likely it is an issue with the USB port itself. Unfortunately, for that phone, the part is soldered to the motherboard and not a repair for a casual DIY tech. That said, your easiest work around will be to buy an extra battery and an external battery charger. Then you just pop in the new battery and leave the other to charge on the wall. I actually miss being able to do this (I have a Nexus) as it does not require you to be plugged into the wall, just the battery in the charger. If you need to transfer files without the port, there are numerous solutions via wifi and BT.
es0tericcha0s said:
If the device is not charging properly and you know for certain that it is not an issue with the cable/charging block/etc, then most likely it is an issue with the USB port itself. Unfortunately, for that phone, the part is soldered to the motherboard and not a repair for a casual DIY tech. That said, your easiest work around will be to buy an extra battery and an external battery charger. Then you just pop in the new battery and leave the other to charge on the wall. I actually miss being able to do this (I have a Nexus) as it does not require you to be plugged into the wall, just the battery in the charger. If you need to transfer files without the port, there are numerous solutions via wifi and BT.
Click to expand...
Click to collapse
Thanks For Your Help
But My Phone Charge But With Out The Charging Sign
elza3ym said:
Thanks For Your Help
But My Phone Charge But With Out The Charging Sign
Click to expand...
Click to collapse
Does it sync to the PC or attempt to load drivers when connected?
es0tericcha0s said:
Does it sync to the PC or attempt to load drivers when connected?
Click to expand...
Click to collapse
Yes , Its Charging And Working With USB Cable Very Well
Ok, well then if it all works fine and is just cosmetic, your choices are to factory reset and see if it is an easy fix or to reload the OS with Odin (and reset).
es0tericcha0s said:
Ok, well then if it all works fine and is just cosmetic, your choices are to factory reset and see if it is an easy fix or to reload the OS with Odin (and reset).
Click to expand...
Click to collapse
I Already Tried It And the Hard Reset With No Result
Some Times It Get The Charge Sign And Along Time No
New Thing
I Got This Error When i try The USB Cable On Windows 7 (old version )
elza3ym said:
I Got This Error When i try The USB Cable On Windows 7 (old version )
Click to expand...
Click to collapse
That's what I figured... So, pretty sure either the port is bad, or it's a hardware (motherboard) issue. If it were only that warning on the PC, then one might think driver issue, but that combined with the charging issue, makes me think otherwise - assuming the cord works and syncs properly with other phones. You said you had already restocked the OS with Odin, but that does not seem likely due to the error on the PC. Just a hard reset does not affect /system much, so if there IS an issue with the software, a factory (hard) reset wouldn't do much. If you remove all Samsung drivers and Kies programs, reboot, and reinstall Kies (for the drivers) and you still get that message, then it's most likely hardware related.
es0tericcha0s said:
That's what I figured... So, pretty sure either the port is bad, or it's a hardware (motherboard) issue. If it were only that warning on the PC, then one might think driver issue, but that combined with the charging issue, makes me think otherwise - assuming the cord works and syncs properly with other phones. You said you had already restocked the OS with Odin, but that does not seem likely due to the error on the PC. Just a hard reset does not affect /system much, so if there IS an issue with the software, a factory (hard) reset wouldn't do much. If you remove all Samsung drivers and Kies programs, reboot, and reinstall Kies (for the drivers) and you still get that message, then it's most likely hardware related.
Click to expand...
Click to collapse
Thank You So Much , Iam Downloading Kies Now
MAY This A Rom Problem ??
Can I Root The Phone And Try ??
I Think One Day I Booted The Phone And It Started With Some Thing Like Recovery Mode With Message Like Dont Turn Off The Phoe And It Took Long Time So I Removed The Battery
I Think This May Be The Reason , So I Think The Problem Is Form The Rom
elza3ym said:
Thank You So Much , Iam Downloading Kies Now
MAY This A Rom Problem ??
Can I Root The Phone And Try ??
I Think One Day I Booted The Phone And It Started With Some Thing Like Recovery Mode With Message Like Dont Turn Off The Phoe And It Took Long Time So I Removed The Battery
I Think This May Be The Reason , So I Think The Problem Is Form The Rom
Click to expand...
Click to collapse
It's not unheard of that roms can cause connection issues, but very rare on stock based roms and kernels. If the computer doesn't recognize the phone then it might be tricky to root. It's possible that you could root with an app like Framaroot and then install Mobile Odin and flash the firmware from the phone, but it depends on what build version of the software you have to which root methods are supported.
es0tericcha0s said:
It's not unheard of that roms can cause connection issues, but very rare on stock based roms and kernels. If the computer doesn't recognize the phone then it might be tricky to root. It's possible that you could root with an app like Framaroot and then install Mobile Odin and flash the firmware from the phone, but it depends on what build version of the software you have to which root methods are supported.
Click to expand...
Click to collapse
It doesnt work with kies :crying:
and Iam New In The Android World I Will Find Avideo On Youtube How To Root my Video
I Will Try On My DeskTOp PC
elza3ym said:
It doesnt work with kies :crying:
and Iam New In The Android World I Will Find Avideo On Youtube How To Root my Video
I Will Try On My DeskTOp PC
Click to expand...
Click to collapse
i have already told you in my first reply
its just a hardware issue
i have already face this type of error when my usb port is not connect properly
Vaibhav Chauhan said:
i have already told you in my first reply
its just a hardware issue
i have already face this type of error when my usb port is not connect properly
Click to expand...
Click to collapse
Thanks For Your Help
But , I Dont want Any one to unlock my phone , i want it to be like the new
elza3ym said:
Thanks For Your Help
But , I Dont want Any one to unlock my phone , i want it to be like the new
Click to expand...
Click to collapse
so take it to the repair shop
Vaibhav Chauhan said:
so take it to the repair shop
Click to expand...
Click to collapse
I Egypt The Repair Shops IS So Stupid And I Dont Want Them To Destroy My Mobile Phone
elza3ym said:
I Egypt The Repair Shops IS So Stupid And I Dont Want Them To Destroy My Mobile Phone
Click to expand...
Click to collapse
there is no samsung care??
Hi. I'm sorry if i'm not posting in the good place but y'all are my last solution before mental breakdown lol .
basically now when i connect my phone to pc (tried three different cable and the one coming in the phone phone too) i get a "cannot recognize usb" msg thing and in my device manager it says "Unknown USB Device Descriptor Request Failed" . so i can't no more boot my phone into download mode .
if anyone know any solution , i will take anything at this point even the one i already tried
Try updating the Windows driver for it.
blackhawk said:
Try updating the Windows driver for it.
Click to expand...
Click to collapse
i tried to install a driver but i don't think i found the good one , do you have any link or what i should look for exactly ?
The latest version of SmartSwitch should have it unless Samsung didn't update it
Another reason I never upgrade firmware...
well it doesn't work hahaha even a thing to re install the driver in smart switch but it doesn't work , yay
In device management, scan for new drives command, can you see it then?
Check Event Viewer for error messages too.
mhhh scanning for hardware change does nothing and i don't see anything about my device manager or usb for in event viewer :/
Vaih said:
mhhh scanning for hardware change does nothing and i don't see anything about my device manager or usb for in event viewer :/
Click to expand...
Click to collapse
The PC isn't detecting it. Yeah... you probably can't roll back to 10 either. 12 is worse. It's a trap. Try another PC...
Vaih said:
basically now when i connect my phone to pc (tried three different cable and the one coming in the phone phone too) i get a "cannot recognize usb" msg thing and in my device manager it says "Unknown USB Device Descriptor Request Failed" . so i can't no more boot my phone into download mode .
Click to expand...
Click to collapse
What has the fact you can't boot phone into EDL-mode to do with default Windows 11 OS USB- driver ( what is USB Generic Parent Driver - Usbccgp.sys )?
If suitable ADB-driver is installed on PC then you can boot the phone into EDL-mode ( AKA Download mode ).
Code:
adb devices
adb reboot edl
FYI:
Please keep in mind that Windows app Odin only works flawlessly when phone is booted in the EDL.
Latest VersionOdin v3.14.4Release Year2022
NOTE:
Always install and use the USB drivers for Android as provided by OEM: Both ODIN and Samsung USB drivers are 100% compatible with any Samsung smartphone or tablet.
blackhawk said:
The PC isn't detecting it. Yeah... you probably can't roll back to 10 either. 12 is worse. It's a trap. Try another PC...
Click to expand...
Click to collapse
ok i tried with another pc and even a new cable that came with a keyboard so ik it got data and power , still the same error on the two pc so i guess the problem is from my phone ?
Vaih said:
ok i tried with another pc and even a new cable that came with a keyboard so ik it got data and power , still the same error on the two pc so i guess the problem is from my phone ?
Click to expand...
Click to collapse
Think back to when this started. What was added or changed? You can still do a factory reset from Settings. The new Samsung's are fubar... I don't need any external connection to invoke the boot menu on my N10+'s.
Another reason not to use Samsung again.
blackhawk said:
Think back to when this started. What was added or changed? You can still do a factory reset from Settings. The new Samsung's are fubar... I don't need any external connection to invoke the boot menu on my N10+'s.
Another reason not to use Samsung again.
Click to expand...
Click to collapse
yeah gonna reset to see if it can fix my problem because i don't remember what i could've tweaked lol , i'll report back if it's still broken
still not working i give up with this phone for now maybe it will fix it self one day. thanks a lot for trying to help tho ^^