New port twrp 3.0.2 for g360h by me
................................
What's new?
based on stock lollipop kernel and libs and files..
[*]mtp and usb fixed.. now u can copy and paste files via mtp on pc
[*]slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
[*]adb via recovery fixed for developers
[*]must emmc lags fixed with new format without rm-rf... not tested
note....to get mtp working you need disable and Enable mtp via twrp mount options when usb cable connected to pc ...
Flash it via old twrp and restart to recovery.. enjoy
Download:
View attachment twrp-3-0-2-fixed-v2-blue.zip
Thank you so much. And hey please can you help in you know making RIL for android Oreo please? You did it once with xosp nougat. Please try I implore you kindly.
Hi dear, make us a better stable version of TW.5.1.1 and do not need any Andoid Oreo, Nougat and the like, at least fix the camera, the SD card and mobile data.
Sent from my Samsung SM-G360H using XDA Labs
arnette said:
Thank you so much. And hey please can you help in you know making RIL for android Oreo please? You did it once with xosp nougat. Please try I implore you kindly.
Click to expand...
Click to collapse
Ril oreo g360h broken at hal level.. source need edited.. just wait new build.
Make Maltsev said:
Hi dear, make us a better stable version of TW.5.1.1 and do not need any Andoid Oreo, Nougat and the like, at least fix the camera, the SD card and mobile data.
Sent from my Samsung SM-G360H using XDA Labs
Click to expand...
Click to collapse
I hope so.. but its not so easy
mv2007 said:
New port twrp 3.0.2 for g360h by me
................................
What's new?
*based on stock lollipop kernel and libs and files..
*mtp and usb fixed.. now u can copy and paste files via mtp on pc
*slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
*adb via recovery fixed for developers
*must emmc lags fixed with new format without rm-rf... not tested
Flash it via old twrp and restart to recovery.. enjoy
Click to expand...
Click to collapse
To you recomend me to use new twrp 3.1.1
Or this one?
Sent from my Samsung SM-G360H using XDA Labs
Cherifiali said:
To you recomend me to use new twrp 3.1.1
Or this one?
Sent from my Samsung SM-G360H using XDA Labs
Click to expand...
Click to collapse
Both good.. but this one with fixed mtp and slow format without rm-rf
mv2007 said:
Both good.. but this one with fixed mtp and slow format without rm-rf
Click to expand...
Click to collapse
Support ffs format?
Sent from my Samsung SM-G360H using XDA Labs
Cherifiali said:
Support ffs format?
Sent from my Samsung SM-G360H using XDA Labs
Click to expand...
Click to collapse
Devs have twrp 3.1.1 support ffs format.. but we don't share it.. Because every rom need special kernel for ffs
mv2007 said:
Devs have twrp 3.1.1 support ffs format.. but we don't share it.. Because every rom need special kernel for ffs
Click to expand...
Click to collapse
Ookey thanks dude
Sent from my Samsung SM-G360H using XDA Labs
Thanks for that Mr mv2007 for your reply. God bless you and thank u a lot.
---------- Post added at 05:55 PM ---------- Previous post was at 05:54 PM ----------
Thanks a lot.
mv2007 said:
New port twrp 3.0.2 for g360h by me
................................
What's new?
*based on stock lollipop kernel and libs and files..
*mtp and usb fixed.. now u can copy and paste files via mtp on pc
*slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
*adb via recovery fixed for developers
*must emmc lags fixed with new format without rm-rf... not tested
Flash it via old twrp and restart to recovery.. enjoy
Click to expand...
Click to collapse
I have another question please
I m running LOS 14.1
And using SD card as adoptative storage
Is there any workaround to flash file that are on SD card on recovery ?
Sent from my Samsung SM-G360H using XDA Labs
Thank you so much. It was much needed, God bless you.
thanks bro...please fix the TW 5.1.1..i love the rom...thank you
mv2007 said:
New port twrp 3.0.2 for g360h by me
................................
What's new?
based on stock lollipop kernel and libs and files..
[*]mtp and usb fixed.. now u can copy and paste files via mtp on pc
[*]slow format without use rm-rf fixed u dont need wait for 20min anymore its fast
[*]adb via recovery fixed for developers
[*]must emmc lags fixed with new format without rm-rf... not tested
note....to get mtp working you need disable and Enable mtp via twrp mount options when usb cable connected to pc ...
Flash it via old twrp and restart to recovery.. enjoy
Download:
View attachment 4325486
Click to expand...
Click to collapse
Thank you @mv2007 for this recovery. I have two questions regarding this recovery. Hope you'll clear these issues.
1. We used the format option of earlier recovery specially for fixing the lagginess problem, though that usually took longer time but was effective too. Will this recovery be able to do same like the previous one?
2. "must emmc lags fixed with new format without rm-rf" --does this mean that this recovery will permanently fix the native lagginess problem of rooted core prime devices? Or temporarily? Or anything else?
Update: Though this twrp takes lesser time to format but unfortunately it is unable to fix the lagginess. (tested)
To fix that native lag problem use the old twrp.
T3RM1NATOR said:
Update: Though this twrp takes lesser time to format but unfortunately it is unable to fix the lagginess. (tested)
To fix that native lag problem use the old twrp.
Click to expand...
Click to collapse
Did tried latest version ?
Cherifiali said:
Did tried latest version ?
Click to expand...
Click to collapse
I tried mv2007's latest twrp.
Do you know about the official twrp 3.1.1?
Does that also have this shortcoming?
I am thinking about trying that
T3RM1NATOR said:
I tried mv2007's latest twrp.
Do you know about the official twrp 3.1.1?
Does that also have this shortcoming?
I am thinking about trying that
Click to expand...
Click to collapse
I m using 3.1.1
I have faced no bugs but i cant tell you exactely for the lagness
T3RM1NATOR said:
Update: Though this twrp takes lesser time to format but unfortunately it is unable to fix the lagginess. (tested)
To fix that native lag problem use the old twrp.
Click to expand...
Click to collapse
Cherifiali said:
Did tried latest version ?
Click to expand...
Click to collapse
T3RM1NATOR said:
I tried mv2007's latest twrp.
Do you know about the official twrp 3.1.1?
Does that also have this shortcoming?
I am thinking about trying that
Click to expand...
Click to collapse
Cherifiali said:
I m using 3.1.1
I have faced no bugs but i cant tell you exactely for the lagness
Click to expand...
Click to collapse
afaik, there is only way to fix this lagness is using dreamstar's old twrp, i did successfully recover this old pal by wiping again and again like 20times (one take half an hour). So yeah, its not easy and need to be patient, a lot.
Related
For those who want a flashable zip of the Kitkat update:
here is a mega link: https://mega.co.nz/#!L1oTGLJL!jRKZBqGPe3WpY0iMll2v1fGLoDV8K4tLkAHkukfGPKU
Download it, also download the latest super user, put those two files in the phone, boot into TWRP recovery(i used TWRP 2.7.0.0)
Reboot to recovery
1.Wipe
- Dalvik Cache
- System
- Data
- Cache
2 Install
-D802 80220A INDIA.zip
Once it finishes installing(Do not Reboot)
Install
- UPDATE-SuperSU-v1.93.zip
3-Wipe cache/dalvik
4-Reboot
5-Enjoy
You will lose custom recovery. You will retain Root. Everything works like butter. its awesome smooth, ive installed all my apps again and its a definite improvement . I have noticed improved camera response, FPS as well.
Reserved!
This too, just in case!
what decryption key
hey guys mega link what decryption key error: Enter decryption key
Upload it to a different server bro.
tugrul_27 said:
hey guys mega link what decryption key error: Enter decryption key
Click to expand...
Click to collapse
Shriac said:
Upload it to a different server bro.
Click to expand...
Click to collapse
Hey guys. Sorry about that. It should work now. Please check and let me know.
Thanks, Worked perfectly. Now I have KItkat and root.
Shriac said:
Thanks, Worked perfectly. Now I have KItkat and root.
Click to expand...
Click to collapse
Thanks for the feedback. I also am running the same and I have not had any issues with hissing while music playback, though when I connect the phone to my creative 2.1 speakers, I do get some extra noise which wasn't present in jellybean. I am hoping that further updates fix this. My next plan is to wait for the next update which LG is sure to release (with knock code) which should also fix other small issues and then make a similar flashable zip, though this time with custom recovery as well.
Sent from my LG-D802 using XDA Premium 4 mobile app
Thats a good idea. For the hissing issue i am going to try the LG tweaksbox module.
Thanks bro
ndnesh said:
For those who want a flashable zip of the Kitkat update:
here is a mega link: https://mega.co.nz/#!L1oTGLJL!jRKZBqGPe3WpY0iMll2v1fGLoDV8K4tLkAHkukfGPKU
Download it, also download the latest super user, put those two files in the phone, boot into TWRP recovery(i used TWRP 2.7.0.0)
Click to expand...
Click to collapse
Thans bro, you are the man. Was hunting for such a thing for a while since i was on PA with TWRP.. You are a life saver..
Thanks again for this
Thanks ndnesh
LG-D802 cihazımdan Tapatalk kullanılarak gönderildi
Darmstadtium said:
Thans bro, you are the man. Was hunting for such a thing for a while since i was on PA with TWRP.. You are a life saver..
Thanks again for this
Click to expand...
Click to collapse
tugrul_27 said:
Thanks ndnesh
LG-D802 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
You are welcome! I will keep updating this thread with the latest kitkat for us Indians..!
1. This is for 16GB or 32GB?
2. After flashing the KITKAT, If i go back to JB can i flash the nandroid backup of JB using TWRP recovery???
jebas15 said:
1. This is for 16GB or 32GB?
2. After flashing the KITKAT, If i go back to JB can i flash the nandroid backup of JB using TWRP recovery???
Click to expand...
Click to collapse
I used this on my 32GB G2 and works fine.
Yes you can restore the backup.
Waiting for D80220c/b for India with knock code and bug fixes. Once that comes I'll update the zip and create new instructions.
Sent from my LG-D802 using XDA Premium 4 mobile app
Hey man awesome work. Any bugs in this?
anudeep95 said:
Hey man awesome work. Any bugs in this?
Click to expand...
Click to collapse
Hi Anudeep,
Thank you. I Still havent found any bugs and i have been using this same ROM for about 25 days now. I see the bluetooth in the battery stats, but its not draining any actual battery when i cross check in GSAM and BetterbatteryStats.
I did not face any hissing/crackling sound in both the stock earbuds and in the aftermarket SONY earbuds that i use.
I am very happy with the 2/2.5 days battery life with 6+ hours SOT that i get on a regular basis on this ROM. This is with 3g data on all the time, and with battery saver on when i am sleeping.
I know this will only improve once we have the next update with knock code and bug fixes. I am waiting for an Open European Update/ Indian Update to go ahead and create a new zip file with root etc.:laugh:
jebas15 said:
1. This is for 16GB or 32GB?
2. After flashing the KITKAT, If i go back to JB can i flash the nandroid backup of JB using TWRP recovery???
Click to expand...
Click to collapse
Hi,
This will work on both 16GB and 32GB phones.
That's great man. So can I use titanium to restore my apps and data?
And will have to flash a new custom ROM afterwards?
ndnesh said:
Hi,
This will work on both 16GB and 32GB phones.
Click to expand...
Click to collapse
Hey @ndnesh
a quick question, if i use this flashable zip and skip installing supersu. can i take future OTAs ?
Hi guys.... i need tester for the Multirom port. If someone is interested pls reply here. Tnx. ( The files are ready )
Need to be on a stock or stock based rom!
Darn I was like MULTIROM!!!!! I'll test!!! Then you said stock or stock based ROM, I'm not on one of those, I'm on VanirAOSP. So if you need a tester for someone on AOSP, I'm open for it.
skiman10 said:
Darn I was like MULTIROM!!!!! I'll test!!! Then you said stock or stock based ROM, I'm not on one of those, I'm on VanirAOSP. So if you need a tester for someone on AOSP, I'm open for it.
Click to expand...
Click to collapse
For now I have only a stock kernel that support kexec hardboot... when this is working many will come.
Sent from my SM-N910F using XDA Free mobile app
Skin1980 said:
For now I have only a stock kernel that support kexec hardboot... when this is working many will come.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
I can backup my VanirAOSP, flash skydragon, then your kernel, then the multirom, then have my Vanir backup as a secondary. So yea I can test for ya.
skiman10 said:
I can backup my VanirAOSP, flash skydragon, then your kernel, then the multirom, then have my Vanir backup as a secondary. So yea I can test for ya.
Click to expand...
Click to collapse
Will send you the link
Sent from my SM-N910F using XDA Free mobile app
Skin1980 said:
Will send you the link
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Yes please I'll be waiting
skiman10 said:
Yes please I'll be waiting
Click to expand...
Click to collapse
PM Sent
Skin1980 said:
PM Sent
Click to expand...
Click to collapse
Just got it, I'll test it when I get home from work. In about an hour.
I'd be interested unfortunately will not be able to test for a few days busy with work and need my phone lol. But thanks for development!
Sent from my LG-VS985 using Tapatalk
Skin1980 said:
Hi guys.... i need tester for the Multirom port. If someone is interested pls reply here. Tnx. ( The files are ready )
Need to be on a stock or stock based rom!
Click to expand...
Click to collapse
I'm on BlissPop 1.7 but I have a Skydragon 12B backup ready to restore and test this for you.
Skin1980 said:
Hi guys.... i need tester for the Multirom port. If someone is interested pls reply here. Tnx. ( The files are ready )
Need to be on a stock or stock based rom!
Click to expand...
Click to collapse
I'm off this week, and have plenty of time to test this for you. Currently fixed on stock based roms.
I can test as well. Currently on skydragon Rom and kernel
okay so like I was just looking to see if there was a multi rom thread or a request and become the first begger. and I'm like Dam, it's almost here! I have no problems with a tot or kdz on the phone.... so feel free to pm a link and I'll test it out. pretty please? I used to have a droid bionic with safestrap and I miss it. With all these roms to try out and test who could say no.
I'm on skydragon 2.01 with 12b but do a cm12 nightly every so often to see where their at. I've tried Jasmine, cm11 and a few others. With the 24gb internal this should be fun. (safestrap only allowed use of internal memory and I'm assuming the same here)
I'm game
http://m.youtube.com/watch?v=JDnDNxqfSaw
Sent from my VS985 4G
Hi guys:
the files are here:
https://www.androidfilehost.com/?fid=95897840722642083 kernel
https://www.androidfilehost.com/?fid=95897840722642093 TWRP
https://www.androidfilehost.com/?fid=95897840722642094 Multirom Zip
1- flash kernel
2- reboot and check if it working
3- reboot in recovery and flash the new twrp
4- reboot recovery
5- flash multirom zip
6- reboot and check if the MR menu is showed
7- rebot in recovery and install a 2nd rom ( advanced -> multirom )
The TWRP has a bug, pls set the screen always on ( under settings)
This is for stock rom ( also stock-based) and stock kernel.
Tnx
Skin1980 said:
Hi guys:
the files are here:
https://www.androidfilehost.com/?fid=95897840722642083 kernel
https://www.androidfilehost.com/?fid=95897840722642093 TWRP
https://www.androidfilehost.com/?fid=95897840722642094 Multirom Zip
1- flash kernel
2- reboot and check if it working
3- reboot in recovery and flash the new twrp
4- reboot recovery
5- flash multirom zip
6- reboot and check if the MR menu is showed
7- rebot in recovery and install a 2nd rom ( advanced -> multirom )
The TWRP has a bug, pls set the screen always on ( under settings)
This is for stock rom ( also stock-based) and stock kernel.
Tnx
Click to expand...
Click to collapse
I know that multirom needs stock Rom and kernel for the primary Rom but can you have aosp as secondary?
wwevoxnj said:
I know that multirom needs stock Rom and kernel for the primary Rom but can you have aosp as secondary?
Click to expand...
Click to collapse
Did we ever get answer to secondary
dabug123 said:
Did we ever get answer to secondary
Click to expand...
Click to collapse
Nope not yet. Going to test it tonight most likely unless my school work takes longer than expected.
wwevoxnj said:
Nope not yet. Going to test it tonight most likely unless my school work takes longer than expected.
Click to expand...
Click to collapse
Well maybe the dev will chime in,I can try no biggie if not!
So This is first Miui Dev Rom based on Marshmallow...
All Thanks to original DEV THOR TIGER.... and Kuma sir for cm13
In latest Build google keyboard added. And now No more chinese apps
Whats Working..
1. Ril
2. wifi
3. camera
4. Bluetooth
5. LTE and VoLTE
6. LED
7.GPS(not tried)
8.Sensors
9. Audio
10. Video recording
11. Camera
Whats not working
1. network signal not showing. But Some Users are getting Sim Loaded.
2. Video calling on VoLte
3. Swapping Data sim card gives reboot. And then it gets bootloop. Then go to recovery and just dirty flash the MIUI MM 2 rom zip again and it will get fine.
you tell more
DOWNLOADS
MIUI Marshmallow THIRD
MINIMAL A-Gapps
How to flash
1. Download Miui_MM_3_Redmi2.zip and a-gapps package.
2. Reboot to twrp recovery
3. make backup of current rom
4. Now wipe data, cache, system and dalvik cache
5. now flash Miui_MM_3_Redmi2.zip and a-gapps
6. when flashing completes reboot to system
7. wait till rom boots, and it will take some time to load miui 8 setup.
Note. It shows no sim card...but dont worry it is fine. Sims are loaded properly ...
for Volte and data you need to set APN in setting.
Note2- Only for porters. If anyone is trying porting and editing chinese rom...and you want to delete chinese apps...you only need to delete superSU zip in rom. Chinese devs are containing their chinese app in SuperSu zip.
SOURCES
1. Kernel Source--https://github.com/CyanogenMod/android_kernel_wingtech_msm8916 (BlackHawk Kernel)
2. Vendors--https://github.com/TheMuppets/proprietary_vendor_wingtech
Credits:
@ketut.kumajaya, Thor Tiger, Me
If someone is missed...just tell me i will add.:fingers-crossed....:fingers-crossed:
Congratulations to your work. Is it supporting multiwindow like cm13
Wow miui skin in cm thanks to your innovative idea
Thread Updated with Download link......
Keyboard Not Showing
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
ShainaGlowy said:
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
Click to expand...
Click to collapse
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
saurabh1234 said:
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
Click to expand...
Click to collapse
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
aishik2015 said:
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
Click to expand...
Click to collapse
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
Thank you for your fast response sir.
I will try it.
You might want to add this to the notes too for other people who might have the same problem
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
based on kuma kernel or jerrica ?
saurabh1234 said:
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
Click to expand...
Click to collapse
Will I dirty flash this ROM or after wiping ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
I tried this in the beginning it didn't work
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
Do something please.
aishik2015 said:
Do something please.
Click to expand...
Click to collapse
i m on vacation..u need to wait for 10-15 days
zieruchan said:
based on kuma kernel or jerrica ?
Click to expand...
Click to collapse
kuma
ROM Looks great. But have some doubt
1) is this based on lollipop firmware?
2) does this make worse experience in 1gb ram phone? Like miui LP ROM.
I hope that network indication is fixed soon...thx
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
iamsubhranil said:
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
Click to expand...
Click to collapse
1. yes miui themes working... I tried only 2-5 themes...
2. It is a dirty port taking cm13 as base. So it is not containing data and system seperate images or .dat file...
It is having file system same as KK rom zip files.
3. Ota will not work.
Adapted oficial ROM with @mparus kernel
Flash this recovery ( only work whit this)
https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
Flash rom
Flash adaptation zip
Flash navbar
Flash gapps
For update ThE shame operation with wipes cache and dalvik,system
Adaptation zip
Enable navbar
ROM
https://download.lineageos.org/cherry
Bugs
Nfc
Are you maintaining official builds of lineage for G7? Does this mean that we'll be getting updates?
Enviado desde mi Moto G4 Plus mediante Tapatalk
can i flash it to g7-l11 its on android 6.0.1 and i unlocked the bootloader and install twrp 3.0.0 and root with magisk
Can you please reupload Adaptation zip and navbar somewhere, where registration is not required?
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
luistro said:
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
Click to expand...
Click to collapse
One question bro... Does the rom support F2FS?
Sent from my Moto G4 Plus using Tapatalk
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
no problema here
can you plz redownload the navbar enabling ?
can i flash it using twrp cause i have problem with philz
Folueadeux said:
can i flash it using twrp cause i have problem with philz
Click to expand...
Click to collapse
of course
GessaNNN said:
of course
Click to expand...
Click to collapse
well actually, as op mentioned it works with philz only.
i tried installing with twrp, it failed and the error message was something like this rom is not compatible with your device.
then i tried the recovery op linked, worked a charm.
mhanp said:
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
Click to expand...
Click to collapse
Hi.first register on htcmania to download files and install rom and other tools and gapp and clean cach/delvik and restart...with philz recovery...
Excuseme my english not good..
Personally, I inject an install script made by me in which there's G760-L01 as compatible device everytime I download a new nightly, then it flashes with TWRP without problems.
updated firts post
Can someone help me with an issue i have?
my headphone jack stopped working and the only way it works again is with an app called SoundAbout but i'm very tired of switching modes everytime..
is my headphone jack damaged or is it the system not correctly routing the sounds?
I've flashed many ROMs and still no fix, have to use this stupid app please help!
Hello, I was trying to install this custom rom from TWRP 2.8.7.0 but when i try to flash this file i get the following error
E3004: This package is for device : c8817d,g620s,C8817D,C8817E,G621-TL00,G620S-UL00,G620-L01,Che1-CL20,Che1-L04:
this device is .
Click to expand...
Click to collapse
along with the following error messages (that i think they are related to twrp):
E: unknown command [log]
E:Error executing updater binary in zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Error flashing zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Click to expand...
Click to collapse
I don't have that much skills in rom flashing for android (I've only flashed almost successfully another rom for a lg g7-01), so can someone please help me with this?
Thanks in advance, Spinoni31.
Edit: I decided to switch to philz and it worked. The only things that don't seem to work are the NFC, and with it, my flip cover. If soemone can help me on this matter, i would really appreciate it. Thaks, Spinoni31
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Vodes said:
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Click to expand...
Click to collapse
Magisk link please :highfive:
Alanryav said:
Magisk link please :highfive:
Click to expand...
Click to collapse
Works perfectly fine with the official Magiskv14.0.zip
............ Xda has the authority to remove my post if my post is on the wrong place or without there permission ..
Mokee team has the authority to remove my post because they are the Dev of this .... And both of xda and mokee has all the rights to remove this ....
............... Disclaimer..............
This rom isn't belongs to me .. I'm not a Dev, not a maintainer, nothing ......
THIS ROM BELONGS TO MOKEE TEAM .
THEY are working for this rom..
Mokee os is giving nightly updates ...
................... warning.......
Mokee team, or me no one is responsible for dead sd card, nuclear war, for nothing that could be happen by installing this is .........
Installing this os is your own decision.......
Rom information.....
Based on aosp...
Status nightly...
Os version 9.0.
Kernel version 3.18.14.
Open gapps https://opengapps.org/
Optional gapps flame gapps
Tested on a520l
Download a5 2017 https://download.mokeedev.com/a5y17lte.html
Download a7 2017 https://download.mokeedev.com/a7y17lte.html
Read first
If you stuck on boot loop
Change gapps version (example ) if you got boot loop with latest gapps than flash the older gapps ..
Recommend gapps nano, micro ...
If
Screen shots
Hello, if there video call good? dont laggy? whatsapp ?
TheGunner22 said:
Hello, if there video call good? dont laggy? whatsapp ?
Click to expand...
Click to collapse
Try it and explore :laugh:
devil meru said:
Try it and explore :laugh:
Click to expand...
Click to collapse
now i'm goning to test
Post moved to guide news and discussion
devil meru said:
Post moved to guide news and discussion
Click to expand...
Click to collapse
have that here too , whatapp video call very very laggy.
i need video calls bec i'm deaf.
thanks anyway.
TheGunner22 said:
have that here too , whatapp video call very very laggy.
i need video calls bec i'm deaf.
thanks anyway.
Click to expand...
Click to collapse
I will suggest you to stay on stock if you want this ..
2nd try option58 a7 port for a5 best rom ever ...
Same as stock Samsung firmware try it
TheGunner22 said:
have that here too , whatapp video call very very laggy.
i need video calls bec i'm deaf.
thanks anyway.
Click to expand...
Click to collapse
As I said in the other thread, we're basically out of luck until it gets fixed in lineage. If it's not fixed in los 16, hopefully it is in los17.
SnowFuhrer said:
As I said in the other thread, we're basically out of luck until it gets fixed in lineage. If it's not fixed in los 16, hopefully it is in los17.
Click to expand...
Click to collapse
Right...
I'm still checking the rom. searching for bugs, thanks for this btw. good job!
Shiroyuki82 said:
I'm still checking the rom. searching for bugs, thanks for this btw. good job!
Click to expand...
Click to collapse
:good:
SnowFuhrer said:
As I said in the other thread, we're basically out of luck until it gets fixed in lineage. If it's not fixed in los 16, hopefully it is in los17.
Click to expand...
Click to collapse
i will hope.
---------- Post added at 14:12 ---------- Previous post was at 14:11 ----------
Shiroyuki82 said:
I'm still checking the rom. searching for bugs, thanks for this btw. good job!
Click to expand...
Click to collapse
you know that have bug with video calls right?
YouTube link
ok
please can you upload the twrp you used because I try to install but restart in the twrp and it doesn't boot
Blaster27 said:
please can you upload the twrp you used because I try to install but restart in the twrp and it doesn't boot
Click to expand...
Click to collapse
https://dl.twrp.me/a5y17lte/
Install latest twrp 3.3.1.1
Oem unlock ..
Goto download mode connect to odin
un check auto reboot
Flssh twrp .
Reboot into recovery (donot boot into system )
Format data ..
Flash rmm
Reboot to recovery again .
Flash the rom you wanna flash
ok
devil meru said:
Oem unlock ..
Goto download mode connect to odin
un check auto reboot
Flssh twrp .
Reboot into recovery (donot boot into system )
Format data ..
Flash rmm
Reboot to recovery again .
Flash the rom you wanna flash
Click to expand...
Click to collapse
I install the rom, but it doesn't start it stays in the logo and then reboots and stays in recovery
Twrp https://dl.twrp.me/a7y17lte/
Rom https://download.mokeedev.com/a7y17lte.html
Gapps https://opengapps.org/
Kernel https://androidfilehost.com/?fid=4349826312261646718
I have uploaded all files you need
Rom gapps kernel twrp .... Flash rom flash gapps reboot
If you stuck on boot loop goto trwp flash rom again gapps and flash kernel ..
If still you have boot loop than try lineage 16, crdroid , pixel ex,
And see if any of these rom successfully boot..
Than copy the kernel.img from the rom which is booted ..and flash mokee os gapps and that img file ..
Hope it will boot ....