Hello,
Two days ago, I was trying to remove security problems logo from my phone so I searched over net and found that I must add ro.lenovosafeapp=1 at the bottom of the build.prop. So I tryed and renamed for some reason build.prop and forgot to change name to the normal value (build.prop) and my phone swithed off because of low battery.
So now there is a problem, lenovo logo is displayed, I can not turn on the phone, my phone is not visible in my computer.
I dont have twrp recovery, only stock one so I can not install new rom via OTG USB
I have another one k910, same model and how can I make that my phone in download mode appears in the my computer section as a flash drive or something else?
Related
Hey all,
In an attempt to load the custom ROM from http://forum.xda-developers.com/showthread.php?t=2658343 I kinda broke the phone.
Part of the steps is to flash the custom Recovery screen.
In the steps you use the Scatter file that's provided and load that up with the SP FlashTool.
Problem though is that I started to get the error SP FLASH TOOL ERROR : (8038).
I then read that by using MTK Droid Root & Tools, I could create a new Scatter file that would fix the error...
Created the new scatter file and then when I loaded it, I got the Big Green Circle saying everything was cool.
Rebooted the phone and it wouldn't come back on.
Crap.
Tried loading into the Recovery screen using the volume and power button, but nothing shows up on the screen.
Tried plugging it into my Win7 and WinXP computers but neither recognize the device and nothing shows up on the screen to say that it's charging.
Is this phone completely gone or is there something that can be done?
Old thread but somehow connected brand new experience to be documented:
What I just experienced was, after a cancelled attempt of flashing recovery, the phone was off and didn't go back on. I tried fiddling with the buttons and assumed it was bricked. Fortunately I didn't give up too soon. It was only after pressing the on button for a very extended time (>30secs?) that it came back to life. It didn't boot further than Wiko logo, but the key reactions were back to normal concerning reboot, booting recovery and cold start.
Hi guys,
My case is now that I have been trying to flash CM12 to my Z2 Tablet (castor), and i've made a possible huge mistake.
Got Cyanogen Recovery (./fastboot boot boot.img) up and running, but I seem to have fail to remember to authorize my device before starting. In every instance this should not be a problem because nothing have been deleted yet.. You guessed it, that is my problem - system got deleted somehow. In a kinda bootloop now, Sony icon pops up, then the screen goes black.
Now I can't install via Sideload or push because my mac is unauthorized. Failed to find a stock image from Sony and I'm stuck.
Tips for this?
Hey guys
The problem is that whenever i turn on the tablet it turns on and stuck on the boot logo which the brand name of this tablet and never skip through it , as i tried to enter the recovery mode by pressing the combination keys but no succeed , used "Android multi tool " software , connected the tablet to the PC and tried to use the software but it says that there is no device connected and the device manager has identified it as "Android ADB Interface" , i have searched a lot about "entering the recovery mode" for this brand everywhere but with no luck :crying:
it's brand "Compu Tab BY-7071" but seems to be unknown brand unfortunately, so i managed to open the back cover and to get the CPU's brand , it's "Allwinner Tech A23" and i attached some images below.
i have tried almost everything but with no luck !
is there any way left to restore this dead tablet ?
maybe if i try to disconnect the battery from the circuit board for a while to discharge will work ?
by the way the problem started when i rebooted the tablet into the Boot Loader from the TWRP app i have it installed from the google play store .
Please guys help me , Thanks very much
love XDA-Developers
After factory reset I get "setup wizard has stopped" but I'm not able to flash my rom
Hi all
this is my first post so please be nice to me if I do something wrong.
Ok, where to begin with my long list of problems...
1. I have an Evercoss A28b bought in Indonesia but manufactured in China. It has Mediatek 6972 and SW version is ALPS.JB3.MP.V1.40 (that's what I could find in the phone's factory mode)
2. I rooted it 2 months ago and put all my apps and data on it from my old phone with Titanium Backup. I had some minor problems in the beginning but fixed them all and the phone was running smoothly.
3. This morning I froze "Go Launcher Z" because I didn't like it anymore and wanted to try how my phone looks withour it. Since the moment I froze the app nothing happened. I couldn't access the home screen or the app drawer but only my recently used apps when pressing and holding the home button.
4. I wanted to reboot my phone but it kept booting and booting, saying "android is upgrading" all the time. After one hour I took out the battery and now it's dead.
5. I tried to reset it into factory mode and first it seemed to work because it asked me to do all the settings like language, google account etc. As soon as I was finished a window appeared with "unfortunately setup wizard has stopped" and now I can't even see my homescreen or anything. My screen is black apart from the battery, wifi and SIM icons in the top right corner.
Now, what I tried to do:
1. I googled and found a few solutions saying I should flash my rom. I googled and found the sp flash tool and a rom for my phone.
2. SP Flash Tool did not recognize my phone and there was no scatter file in that ZIP file that I had downloaded.
3. I downloaded MTKdroidtools to try to generate a scatter file from my phone and a lot of different drivers but none of them made my phone connect with DroidTools.
4. So I went back to SP Flash Tool and googled for hours in order to find a scatter file and make my phone connect with SP Flash Tool. I managed to find another rom, this one had a scatter file in it and I also managed somehow to connect my phone with SP Flash Tools. It was only recognized after I had selected the scatter file and pressed the download button though.
5. SP Flash Tools brought an error message saying my pmt has changed and I need a new one or something like that. Unfortunately I can't even re-do this to give you the correct error message because I can not connect my phone to the PC any longer. Everytime I do this with battery or without it keeps connecting and disconnecting all the time.
6. I am at my wits ends and don't know what to do any more.
Please help
hi every body
i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so when i turn on it it show only lenovo logo for 2 3 second and then turn off with long vibration i have try many time to load the boot menu with all combination of power and volume button
but it turn off in the same way not loading recovery menu so what i can doo.
is there a way to install the all the boot menu on mobile
or how can i fix it.
Quote:
Originally Posted by FluXx95
Hello everyone.
I just got back from my holyday and searched everywhere, but couldn't find anything, so you guys are my last chance.
So my Lenovo S60a ran out of battery and when I got to the hotel and plugged it in to power, it got stuck at the LENOVO boot logo. After a few hours and several reboots, if finally "woke up", but I found out that it had no baseband and everything was missing... Like a factory reset. Since the phone still has warranty, I called my local Lenovo authorized service, explained them the problem and they told me to upgrade from 4.4.4 to 5.0.2 OTA, so the new baseband will flash over the unknows/unexistent one. I started the update and it got stuck at 75% for 15 minutes or so, then it shut down with a long vibration and that was it, like it's last breath.
I plugged it into QFIL and instead of Quallcom HS-USB QDloader 9008/9006, it appears as Marshall London HS-USB Diagnostics 9006.
I don't really want to get it to the service like my last phone, just to wait 2 weeks, call them and get the answer "We can't do anything, it's dead".
If it's just a problem that requires even a harder method of flashing, I am willing to try it.
Looking forward for help, apreciating any answer/oppinion and thank you in advance.
Hi try this if you didn't , before flashing Disable Driver Signature , you have videos on YT if you don't know how to do!
Downlad this firmware: Password : lenovo4
http://www.mediafire.com/file/v4lryqut16lom9f/Lenovo+S60-a+100%+tested+QPST+file.rar
QPST 2.7.422
http://www.mediafire.com/file/j4gcz64qjm63m86/QPST_2.7.422.rar
Qualcomm USB driver
http://www.mediafire.com/file/e4jz2a4g8lrjfmv/Qualcomm+USB+Drivers.rar
Instruction to flash
Extract the rom.
Open Qfil flasher.
Specify the file in Programmer Path the file will be prog_emmc_firehose_8916.mbn
Now in Load XML specify raw_program_unparse and patch file.
Now click select port and power off your mobile. Volume + and Volume – and then connect usb cable.
Selected port will show like relink HS-USB QD Loader 9008.
Now Press Download Button. After Flash Mobile Phone will be restart.
Credits for file : http://miraclesoftsolution.com
Good Luck