[Rom] [Kernel] [SM-C9000] [N] C9000ZZH1BRD1 [May/05/2018] - Samsung C9 Pro ROMs, Kernels, Recoveries, & Other

This is Touchwiz Nougat for SM-C9000 aka C9LTECHN.
IF YOU FLASH ON C900F YOU DO AT YOUR OWN RISK. YOU HAVE BEEN WARNED
PLEASE BEFORE YOU FLASH ROMS MAKE A COMPLETE BACKUP OF YOUR SYSTEM INCLUDING EFS SO YOU DO NOT BRICK YOUR MOBILE
Modem and Bootloader
Bootloader and Modem from C9000ZHU1BRC2: https://www.androidfilehost.com/?fid=962339331458990219 (SM-C9000)
Stock Odin Firmware
C9000ZHU1BRC2: https://www.androidfilehost.com/?w=files&flid=202643
Roms
Nougat C9000ZHU1BQK1 Debloated: https://www.androidfilehost.com/?fid=889964283620764671 (C900F ported to C9000)
Nougat C9000ZHU1BQK1 DeOdex Debloated: https://www.androidfilehost.com/?fid=673791459329060973 (C900F ported to C9000)
Nougat C9000ZHU1BQL3 Debloated: https://www.androidfilehost.com/?fid=673791459329068625 (Stock HK Firmware)
Nougat C9000ZHU1BQL3 DeOdex Debloated: https://www.androidfilehost.com/?fid=817906626617955776 (Stock HK Firmware)
Nougat C9000ZHU1BRC2 Debloated: https://www.androidfilehost.com/?fid=818070582850509672 (Stock HK Firmware)
Nougat C9000ZZH1BRD1 Debloated: https://www.androidfilehost.com/?fid=674106145207491679 (C900F ported to C9000)
Kernels
Nougat Travis Kernel: https://www.androidfilehost.com/?fid=962157660013070127
Nougat RC2 Stock Kernel: https://www.androidfilehost.com/?fid=962187416754474062
Nougat RD1 Stock Kernel: https://www.androidfilehost.com/?fid=746163614322262568
Xposed for Nougat
https://www.androidfilehost.com/?w=files&flid=229076
These roms includes stock kernel by default and are slightly debloated and or deodexed. Supersu or Magisk is auto installed for root access.
Kernel Features:
Installs SuperSU/Magisk
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Kernel Patched up to 3.10.108
Mild undervolt for our cpu and gpu
Use all cores to boot
F2FS
Ramdisk Optimised
Added core control
Fingerprint fixed fast wakeup enabled
Added more govs
CVE Patches updated as of JAN/2018
Logitech,Microsoft,Sony gamepad support
Kernel Source:
https://github.com/travismills82/c9lte-kernel/commits/Touchwiz-Nougat

very nice rom. very very thank you. you are exellent

ahmetk711 said:
Sen türkmüsün abi ya. Turkcell yazınca. roma tr desteği varmı
Click to expand...
Click to collapse
He is not a turk, and yes there is turkish
evet, turcke dil var

travis82 said:
This is Touchwiz Nougat for SM-C9000
Nougat C9000ZHU1BQK1: https://www.androidfilehost.com/?fid=889964283620764671
Nougat C9000ZHU1BQK1 DeOdex: https://www.androidfilehost.com/?fid=673791459329059940
Nougat Test Kernel: https://androidfilehost.com/?fid=962021903579491176
Nougat QK1 Stock Kernel: https://www.androidfilehost.com/?fid=745849072291687390
Xposed for Nougat: https://www.androidfilehost.com/?w=files&flid=229076
This includes stock kernel and is ported from C900F and is slightly debloated. Magisk is auto installed for root access. I will add more to the main thread here as I cleanup.
Click to expand...
Click to collapse
Wow! this is amazing. You are fast!
Can we flash the same supersu we use on marshmallow to root?
Edit: Thank you @AL_IRAQI

aftermath85 said:
Wow! this is amazing. You are fast!
Can we flash the same supersu we use on marshmallow to root?
Click to expand...
Click to collapse
Yeah

Stuck on samsung galaxy c9 pro screen. can you tell me how can I do that ? instructions ???

MrMutlu said:
Stuck on samsung galaxy c9 pro screen. can you tell me how can I do that ? instructions ???
Click to expand...
Click to collapse
Wipe Data
Flash ROM
Wait for it to boot up ?
which one did you flash ?, i tried it before and it boots up fine

I tried Nougat C9000ZHU1BQK1 DeOdex and I had bootloop. I tried normal and its works fine but battery is decreasing faster.

MrMutlu said:
I tried Nougat C9000ZHU1BQK1 DeOdex and I had bootloop. I tried normal and its works fine but battery is decreasing faster.
Click to expand...
Click to collapse
DeOdex takes a bit longer to boot up, so wait and see

Ok guys 1 I updated deodex try again it might of been my bad **** happens. 2. battery will drain faster till sleep kicks in for apps this should be a known fact right off the table. 3. give it a few days so stuff kicks in your usage is factored in etc. dont be a noob that types before soft kicks in you will just make me go on a wild goose chase with no info can you all give me a debug log before typing crap please seriously? 4th let's get me logs before you upset the dev's your you all are SOL sh!t out of luck on support besides SAMSUCK. Common logic guys and this go's for all devices please.
Thanks
Trav

How is the kernel working that I made please be a bit more vocal it helps me out a lot.

i did'nt used because : i installed after i have set-up fingerprint and pin, after kernel install both pin and fingerprint was unknown, so i put back twrp back-up

criszz said:
i did'nt used because : i installed after i have set-up fingerprint and pin, after kernel install both pin and fingerprint was unknown, so i put back twrp back-up
Click to expand...
Click to collapse
Yea no worries I patched the files in the rom it should be no issue, but I am waiting for the N source to drop cuz like when I worked on Tab S2 I never had an issue with N kernel vs C9. So I know they added in wifi qualcomm source I can tell cuz no more module. So I am hoping I can get the rest perfect like I did tab.

Ok, so do you guys want a port still?, or do you want me to wait for HK Firmware? Both roms work fine on the main op so I'm curious. Next kernel will be Nougat source when Samsung releases it so no more PM'S about that please.

better wait for hk and my personal opinion is to make a rom very colse to stock, remove only app who can be found on market, nothing else, and ofcourse your kernel or stock one. thank you

N source i think it will be a bit better since it will have wifi and better fp firmware in it. My odex rom has all playstore apps removed.

travis82 said:
How is the kernel working that I made please be a bit more vocal it helps me out a lot.
Click to expand...
Click to collapse
I wanted to know if you guys experience a bit slow charging, I'm using the stock kernel & 1.4G rom? ^__^
Still, I am loving our nougat c9pro. Thank you devs and guys

aftermath85 said:
I wanted to know if you guys experience a bit slow charging, I'm using the stock kernel & 1.4G rom? ^__^
Still, I am loving our nougat c9pro. Thank you devs and guys
Click to expand...
Click to collapse
Stock kernel does 1.7a max for fast charge. So it looks like that did not change. Mine I upped it to 2a and I was thinking maybe 2.4a but I don't have a charger to test 2.4 out.
You guys get any slowdowns at all when you fill up ram? I was thinking of Zram and using this instead of a pagefile since the emmc 5.1 chip is slow at read write vs ufs storage. That way all paging will be done in ram and not use the emmc chip. I'll have to try it out this weekend and see if it helps speed up the device in general.

I put odex rom, dirty install and all working fine till now. The same like in barebone prism rom codes like *#06# not working. Must be samsung fault. Very good odex room, no need deodex for me. Also Xposed part from grenify cannot be activated, must be Xposed fault. Thank's Travis82 for rom and hop for hk one soon.

When we recieve HK firmware I have a lot that i will do to speedup the rom and kernel I tested on my port and it was much much much... faster. So until then just wait it up. I noticed same issue as in M that if cores are defined for hotplug that the big cores never slept well to 400mhz so I'll try to get that fixed up when I get source and a new firmware to play with also.

Related

[Rom] [Kernel] [C9LTECHN/C9000] [M] Stock rooted debloated deodexed [NOV/21/2017]

This is a stock rom that is debloated , deodexed and rooted. It is for C9LTECHN (SM-C9000). Just flash in twrp and reboot.
Marshmallow Android 6.0.1
C9000ZHU1AQK1_DeOdex: https://www.androidfilehost.com/?fid=745849072291690211
Kernel V3.3.1: https://www.androidfilehost.com/?fid=817906626617944696
Xposed Framework: https://www.androidfilehost.com/?fid=673368273298981051 and https://www.androidfilehost.com/?fid=745425885120757828
If you want to go back to stock QK1 kernel https://www.androidfilehost.com/?fid=817906626617948244
Rom Bugs:
Fingerprint - Only if a custom kernel is installed.
Kernel Features:
Installs SuperSU
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Enabled NTFS Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Wifi driver updated to LA.BR.1.3.6_rb1.22
Kernel Patched up to 3.10.107
Mild undervolt for our cpu and gpu
Use all cores to boot
CVE Patches updated as of Oct/2017
Kernel source and change-log: https://github.com/travismills82/c9lte-kernel/tree/Touchwiz-Marshmallow
Modem and Bootloader C9000ZHU1AQK1: https://www.androidfilehost.com/?fid=962021903579496076
In case wifi is not enabling unpack modem and bootloader and flash via Odin.
Clean rom, excellent choice of debloat apps.
Thanks
Sent from my SM-T719 using XDA-Developers Legacy app
kernel booting now working on permissive and fixing wifi Than we can get down to cve patching and overall features and improvements. :good:
travis82 said:
kernel booting now working on permissive and fixing wifi Than we can get down to cve patching and overall features and improvements. :good:
Click to expand...
Click to collapse
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
@travis82
Great job indeed..actually I'm a c900f (indian varient ) owner but still feeling happy ..
Sir can you make a debloated rom for our varient or atleast guide which apps can be removed without breaking the functionality of rom..i just use screen mirroring out of samsung rom's features
Congratulations on your development..
Sent from my SM-C900F using XDA-Developers Legacy app
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
aftermath85 said:
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
Click to expand...
Click to collapse
Are you using c9000 or c900f ? Is this rom flashable on our c900f ?
Sent from my SM-C900F using XDA-Developers Legacy app
Awesome
I flashed this rom. believe it is beyond what is said about it. It is absolutely amazing. everything works perfectlyyyyyyy
---------- Post added at 05:37 PM ---------- Previous post was at 05:15 PM ----------
I flashed this rom. believe it is beyond what is said about it. It is absolutely amazing. everything works perfectlyyyyyyy
Great thank you very much
travis82 said:
This is a stock rom that is debloated rooted. It is for C9LTECHN (SM-C9000). Just flash in twrp and reboot. Done.
Download link: https://www.androidfilehost.com/?fid=745425885120752723
Click to expand...
Click to collapse
Great work please make volte support thank you :good::good::good::good::good:
volte works for me. It doesn't work on your SM-C9000? Also if there are any experienced developers I want help with LineageOS. So get a hold of me if you have experience with AOSP developing. I don't want to be solo again like on S7 Edge. It was very exhausting and one of the main reasons I switched phones.
i can not mount data, i am using the latest twrp you @travis82 have posted,
is it ok to flash this rom without wipe? thanks
aftermath85 said:
i can not mount data, i am using the latest twrp you @travis82 have posted,
is it ok to flash this rom without wipe? thanks
Click to expand...
Click to collapse
can't mount data cuz you need to format data. TWRP doesnt support samsung encryption currently. So you HAVE to format data to unencrypt.
Format data, install dm variety, reboot to recovery, install rom
ROM COOK
rom development is easy but solving bugs is like taking a climb to mountain kilmanjero
aftermath85 said:
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
Click to expand...
Click to collapse
Well I have kernel and recovery building in lineage OS 14.1. System is next. Code is uploaded to my GIT so anyone with experience feel free to help out.
travis82 said:
can't mount data cuz you need to format data. TWRP doesnt support samsung encryption currently. So you HAVE to format data to unencrypt.
Click to expand...
Click to collapse
I see, thanks! I already flashed the rom, its awesome!!!
I have the encryption setup but i have to debug to make sure its picking up drm and maybe update the files in twrp for encryption. I'll get to it eventually its not on my important list currently.
Screen on time what are you guys getting vs 100% stock?
Mobile hotspot won't turn on anymore after flashing this ROM.
I've already tried wiping cache and network settings reset.
travis82 said:
Screen on time what are you guys getting vs 100% stock?
Click to expand...
Click to collapse
Will observe, but definitely this ROM is much better than the 100% stock.. even when sleep it does not drain much.
Lineage tree build-able now
Well I said I would do it. Now if OTHER devs from the indian variant would actually chip in and help and not WATCH.... hint hint dev you know who I am talking about, progress would be crazy fast. So you guys owning indian variant I suggest you get on to the other devs to help out.
Dinner time so see ya all later.
Thanks for develop this rom and well done.
Thank you very much for developing this rom. It is awesome. However, the wifi is not working. May I know how to fix it?

[KERNEL][7.0] Unlock all cores A310F

For Unlock 8 core CPU on A310F (a3 2016) Flash this kernel with recovery
Kernel by Alexax
this kernel just work with Android 7
Kernel link : https://files.fm/u/c6xwwgcc
Great work. Thank you very much.
The link is down
HosseinFaster said:
For Unlock 8 core CPU on A310F (a3 2016) Flash this kernel with recovery
Kernel by Alexax
this kernel just work with Android 7
Kernel link : https://files.fm/u/c6xwwgcc
Click to expand...
Click to collapse
Kernel is included in SamFR's A3 2017 to A3 2016 firmware port thread : https://forum.xda-developers.com/samsung-a-series/development/rom-a3-2017-rom-a3-2016-v1-0-t3664252
and can be extracted from the ZIP.
Sorry but can you re-upload the kernel again? I tried the method stated above but didn't work...
Necma said:
Sorry but can you re-upload the kernel again? I tried the method stated above but didn't work...
Click to expand...
Click to collapse
Here you are:
https://drive.google.com/open?id=0B5c1p4v7_8XyRFVtemlXYWJMYkk
The archive contains all three kernels from the thread I've mentioned ( https://forum.xda-developers.com/samsung-a-series/development/rom-a3-2017-rom-a3-2016-v1-0-t3664252 ).
I've tried flashing all of them and all were working fine on STOCK UNMODIFIED A3 2016 Nougat. I've used Flashify from Google Play Store to flash the kernel and rooted the phone with SuperSU to make it possible.
Please be advised that once You flash the 8-core kernel the device would be somewhat faster but at the cost of battery (I've reverted after a while to stock kernel as the phone was barely able to keep up for one day with my standard set of apps).
If You don't want to root Your phone (warranty and stuff) try to find the Odin-flashable kernel image.
HosseinFaster said:
For Unlock 8 core CPU on A310F (a3 2016) Flash this kernel with recovery
Kernel by Alexax
this kernel just work with Android 7
Kernel link : https://files.fm/u/c6xwwgcc
Click to expand...
Click to collapse
do you have a posibility to make 8 cores enable for A310M version?. regards
does this work with revolution os?
csav1551 said:
does this work with revolution os?
Click to expand...
Click to collapse
Revolution Os already have it...
It's the first option when selecting the kernel...
wolfensg said:
Please be advised that once You flash the 8-core kernel the device would be somewhat faster but at the cost of battery (I've reverted after a while to stock kernel as the phone was barely able to keep up for one day with my standard set of apps).
If You don't want to root Your phone (warranty and stuff) try to find the Odin-flashable kernel image.
Click to expand...
Click to collapse
I think enabling 8 cores, then lowering cpu max frequency would benefit battery life at no cost
somebully said:
I think enabling 8 cores, then lowering cpu max frequency would benefit battery life at no cost
Click to expand...
Click to collapse
No. Any app strongly utilizing single core would perform worse (mostly games), this would however be good if you use many apps and are often switching between them.
Link again down
I uploaded kernel to G-Drive if anyone needs it : https://drive.google.com/file/d/1c-NFvUOKTwtftyDc0QkxViL8fAvS1qhm/view?usp=sharing (after downloading extract the 7-zip archive).
On stock nougat (latest updates, etc) works stable with better battery life than it used to work before when I firstly tested it - I think I will use it for longer period of time now.
@alexax66 job well done.
Edit: Decided to return to stock kernel as after flashing this 8-core one and waiting few days - I started having security log issue (it can be mitigated but without using some unofficial apps it's annoying)
link died
please add new link for me (
What exactly was modified in the Kernel?
Is it possible to apply the same or a similar kind of mod to an android 10 kernel?
wolfensg said:
I uploaded kernel to G-Drive if anyone needs it : https://drive.google.com/file/d/1c-NFvUOKTwtftyDc0QkxViL8fAvS1qhm/view?usp=sharing (after downloading extract the 7-zip archive).
On stock nougat (latest updates, etc) works stable with better battery life than it used to work before when I firstly tested it - I think I will use it for longer period of time now.
@alexax66 job well done.
Edit: Decided to return to stock kernel as after flashing this 8-core one and waiting few days - I started having security log issue (it can be mitigated but without using some unofficial apps it's annoying)
Click to expand...
Click to collapse
reupload please
kusti420 said:
reupload please
Click to expand...
Click to collapse
I've decided to upload directly here since this is now possible (someone increased the quota per attachment over the years?). Be aware that this kernel although Alexax66 made it functional has some issues (shortened uptime on battery, there are rarely some other issues which could be ignored but can be annoying).
wolfensg said:
I've decided to upload directly here since this is now possible (someone increased the quota per attachment over the years?). Be aware that this kernel although Alexax66 made it functional has some issues (shortened uptime on battery, there are rarely some other issues which could be ignored but can be annoying).
Click to expand...
Click to collapse
noted. thank you so so much

[WIP] [Kernel] [magisk modules on stock rom]

complied from https://github.com/therootlord/android_kernel_motorola_msm8953
not my code, just sharing because i keep seeing people complain about magisk mods
Features:
-F2FS bug fixed (can flash magisk modules on stock)
-not sure what else
Flash in twrp
TODO:
-kexec-hardboot
-disable force-decrypt
Stock NPS26.116-45 kernel zip: Link
This was my first kernel compilation, let me know if something isn't working
Extreme-Plus-Kernel-nrdgd-1.zip compiled on nov-18-2017 Link: Google Drive
UPDATE, just found out wifi doesnt work, sorry, been traveling and didnt think to test. everything else seems to work tho.
heres an older version of the kernel not compiled by me until i figure this out
UPDATE 2 - wifi fixed
Extreme-Plus-Kernel-nrdgd-2.zip compiled on nov-19-2017 Link: Google Drive
It boots with aex 7.x - to early to say more
Phazmos said:
It boots with aex 7.x - to early to say more
Click to expand...
Click to collapse
wifi doesnt work for me, let me know if its working on yours and which model you have if you can
until then check OP for older version of the same kernel
wifi fixed
Ae3NerdGod said:
wifi doesnt work for me, let me know if its working on yours and which model you have if you can
until then check OP for older version of the same kernel
wifi fixed
Click to expand...
Click to collapse
Didn't notice it was broken - us version here.
It booted, but was very slow and laggy, even did a system cache wipe....Then restoring the default boot.img had wifi not working....Just FYI for those who want to try...Do a backup
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Would you mind sharing the build sequence/commands?
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
Just a note on kernels
I've tested many many kernels on many devices. When they are configured the same, performance/battery is about the same. Any difference was slight enough to be considered noise in the test methods. I always suggest to learn about kernel parameters then tweak it to the way you want. Any kernel will give more performance, or battery life, or anything between - all depends on how you configure it.
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Phazmos said:
Just a note on kernels
I've tested many many kernels on many devices. When they are configured the same, performance/battery is about the same. Any difference was slight enough to be considered noise in the test methods. I always suggest to learn about kernel parameters then tweak it to the way you want. Any kernel will give more performance, or battery life, or anything between - all depends on how you configure it.
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Click to expand...
Click to collapse
EXKM seems to work fine on AEX rom using the butterfly governor good battery life and smooth.
revengineer said:
Would you mind sharing the build sequence/commands?
Click to expand...
Click to collapse
i had to use his toolchain, and fix a few includes for it to work. im going to try different ones to try and figure out the lag, maybe thats not whats causing it but im new at this . been reading logs all day
smokinjoe2122 said:
It booted, but was very slow and laggy, even did a system cache wipe....Then restoring the default boot.img had wifi not working....Just FYI for those who want to try...Do a backup
Click to expand...
Click to collapse
yeah, sorry. new at this. dont know if @geneticengineer wants me passing his old kernels he hasnt posted around either. if you can find his afh, he has a really old one on there thats way faster. im still learning, im working on pulling the stock modules and kernel to make a back to stock zip rn actually will post soon if you keep using it, it speeds up a tiny bit lol
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
planning kexec hardboot and disable force decrypt when i get the hang of this.
Phazmos said:
Just a note on kernels
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Click to expand...
Click to collapse
actually i think i missed something in defconfig that enables the secondary processor, im also going to switch toolchains, expect a new kernel in a few days
Here's a link to GeneticEngineer's AFH-hosted original kernel from the TWRP thread. I don't think he'll mind it being reposted in this thread. This should tide people over until you can iron out the bugs in your build.
https://www.androidfilehost.com/?fid=745425885120765462
Thanks for picking up the baton and running with it, incidentally. I did ask GeneticEngineer to create a thread for his kernel but perhaps he missed the message.
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
i actually get those weird reboot to recovery bugs all the time on this device and 2 things fix it, booting to bootloader and picking "start" or a full restore
I tried version 2. I still couldn't get it to pass Magisk SafetyNet. I also noticed that this kernel breaks fingerprint gestures.
bishop0114 said:
I tried version 2. I still couldn't get it to pass Magisk SafetyNet. I also noticed that this kernel breaks fingerprint gestures.
Click to expand...
Click to collapse
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Loccy said:
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Click to expand...
Click to collapse
Thanks. I tried it and still wouldn't pass SafetyNet. The fingerprint gestures worked though. I am running it on a secondary ROM. Maybe that is causing the issue?
Loccy said:
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Click to expand...
Click to collapse
I've built a fully working stock kernel which has the needed commits for Magisk modules to work correctly and passes SafetyNet [emoji6]. Need to do some more updating (upstream) but I plan on posting it soon, probably new thread (Resurrected Kernel).
bishop0114 said:
Thanks. I tried it and still wouldn't pass SafetyNet. The fingerprint gestures worked though. I am running it on a secondary ROM. Maybe that is causing the issue?
Click to expand...
Click to collapse
A stock based kernel isn't gonna play well with custom ROMs, unless your secondary ROM is a stock ROM? I plan on creating one for cm-14.1+ based ROMs too.
Jleeblanch said:
I've built a fully working stock kernel which has the needed commits for Magisk modules to work correctly and passes SafetyNet [emoji6]. Need to do some more updating (upstream) but I plan on posting it soon, probably new thread (Resurrected Kernel). A stock based kernel isn't gonna play well with custom ROMs, unless your secondary ROM is a stock ROM? I plan on creating one for cm-14.1+ based ROMs too.
Click to expand...
Click to collapse
If you need someone to beta test it, let me know. It is the only reason I am not running stock.

A8 2016 (SM-A810F) Full Odex/Deodex Port For S6/S6 Edge[28-May-2018]

A810F Full Odex Port S6_S6 Edge​​
Some information you should know..
This is a full A8 2016 [ SM-A810F ] firmware port with android version 7.0[NRD90M_A810FXXU1BQJ1]
If you want to report a Bug, provide a logCat with detailed explanation
Please Read the instructions and the F.A.Q Before installing the rom.
You are not allowed to use this base without asking for permission prior to release..
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom, Hit the Thanks button, and consider a donation
ROM IS FULL ODEX
So fast Experience without Any lag
And lots of tweaks and optimizing in This rom
Port Features :-
2018-03-01 March Security Patch
Based on SK TELECOM firmware
SKC csc included (With this u get limited service but after changes CSC or flash any CSC you can Use mobile Data i
didnt change CSC because it has some features)
Pure A8 libs without any edit
VoLTE also fixed (Flash INS USER volte fix)
Call Issued Also Fixed
Dual apps Included
All apps updated
Stock S6 camera (No Bug)
Lots of improvement
Better battery Thn last A8 Odex
Changelog Of New SM-A810S/F
Android OS drain fixed
Device Idle fixed
Fingerprint fixed
3rd Cpu always high freq. Fixed
New Rebased Rom
Full Optimizing with great deep sleep.
And new more too**
Changelog OF New A810F 28/5/2018
Rebased Whole rom with November firmware
S9 Oreo Emoji
Oreo KeyBoard Added
SPowerPlanning Added(Not Confirm Work Or Not)
init.d Tweaks
New Framework With Mods
CSC Tweaks Added
Default CSC Is INS with VoLTE
Call Issue Fixed
GPS FIxed
Galaxy App Store Fixed
3rd CPU fix awake
Auto brightness fix
App lock fix
Fix late Awakening screen (Some User face that)
Fingerprint fixed(dont register while setup just setup all things reboot and register FP else. Not working)
Added default theme Pix Ui V2
After boot just flash Pix Ui Mod for black theme.
Pos22 Kernel is really great with this rom i personally tried
Other Things Try And know..
New Rom Deodex Rom By @lukasb06
Installation Steps
Boot the phone into Recovery Mode
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom
Flash The Rom And Flash Kernel and Magisk and Reboot
The first boot may take 5 min
Old A810S Download : Mega
New 14-May-2018 Download : Mega
New 28-May-2018 Odex Download : Mega
New 28-May-2018 Deodex Download : Mega
Join For Support : Telegram
If You Want Black Ui Mod Then Flash This File For Full Black Mod [Remember After Boot You Have To Flash This File]
Here is URL(Screenshot Are Attracted Below) : PixUiMod
Credits :-
Bunty_parona
Joseph Adam
Enes
Prashant
Parth
MrHai
Anan
Ridwan
Shivam
Arianoxx
And
My Universal team.​
If i forgot someone please PM me.
XDA:DevDB Information
A810S FULL ODEX PORT,
ROM for the Samsung Galaxy S6/S6 Edge
Contributors
@bunty_parona
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: v1
Created 2018-05-06
Last Updated 2018-05-06
After uploading the rom during startup, the phone returns to recovery and does not start.
Is this rom support AOD ?
manix1960 said:
After uploading the rom during startup, the phone returns to recovery and does not start.
Click to expand...
Click to collapse
Flash latest magisk it will boot..
iamkani said:
Is this rom support AOD ?
Click to expand...
Click to collapse
Sure
Great work bro!!!
Cant enter ur telegram group , said its blocked cause of porn content !!!
Sent from my SM-G955F using XDA-Developers Legacy app
yes it has issue with some county server u can join as well this new
https://t.me/joinchat/BthXKUet8Jrurq-4G-OdWg​
ahmadfatafta said:
Cant enter ur telegram group , said its blocked cause of porn content !!!
Sent from my SM-G955F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Shivam_m98s said:
Great work bro!!!
Click to expand...
Click to collapse
Thank u bro..
AOD for me not working, someone else got this Problem?
It's smooth.?
samadhi23 said:
AOD for me not working, someone else got this Problem?
Click to expand...
Click to collapse
Use custom kernel that support AOD
So Called Engineer said:
It's smooth.
Click to expand...
Click to collapse
Thank u
Work on g920s ?
G920T no audio. Neither me or the other guy could hear each other
jouvarider said:
Work on g920s ?
Click to expand...
Click to collapse
Try it with backup
rydoginator said:
G920T no audio. Neither me or the other guy could hear each other
Click to expand...
Click to collapse
Flash T mobile call Audio fix
Is this a new release from May 14?
Maps and other gps apps not working correctly.
bunty_parona said:
Flash T mobile call Audio fix
Click to expand...
Click to collapse
This one? if so, then it won't boot after flashing..

[ROM][AOSP 9.0.0_r37][XZ1 G8341/G8341] [Vanilla][90/120Hz]

Xperia XZ1 G8341 Vanilla AOSP ROM​
This is my first ROM and its fully Vanilla. I Just followed this Build guide without any modifications whatsoever.
The future goal is to build a stable Rom with mostly FOSS Software, stability and useful tools/settings.
Bugs/missing functions i discovered so far:
- Camera Not working always and -> Lens Distortion. Although RAW should be possible.
- Sony Bootlogo has some Artifacts
- No automatic APN setting
- No NFC 25.05 working
- No 90/120Hz mode (or does it?)
- No Display Colour Calibration
- Low Singlethread Geekbench Score (836) and (6060 Multicore) [Governors and schedulers not optimized]
Fingerprint Sensor is working and it takes some time to find Network (not sure if bug or normal).
I hope to find usable answers to those problems + ideas and hope, to receive enough feedback to improve as much as possible.
Just Flash all files (boot, recovery [or any working TWRP], system,vendor, userdata and the OEM Binaries [
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img] and you should be good to go.
XZ1 Single Sim(25.05.19)
XZ1 Dual Sim
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img
120Hz Mode
Obviously I am not responsible for bricked devices or anything that this could be related to.
XDA:DevDB Information
RumiRom, ROM for the Sony Xperia XZ1
Contributors
celeron1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Stock AOSP Userdebug
Version Information
Status: Testing
Created 2019-05-25
Last Updated 2019-05-30
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
marios199546 said:
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
Click to expand...
Click to collapse
Neat!
Im gonna try these. Thanks a lot.
I would marry if you turn 60fps to 90-120-144 omg plz plz
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
There is little to nothing about this I could find for the xz1 except one oreo based rom. I have to compile the kernel for it and find out if 60+ hz is really working and how to succesfully implement a toggle option for it. Since im new at this it might take some time without help but its something I want to impliment.
The Xz1s Display obviously is really underperforming in non Sony roms without the "Bravia engine" (colour apperence) imo compared to other open roms. I tried the Bravia magisk module but could not see any difference (also did not checked what it should do at system level).
So if someone has more knowledge feel free to share
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
*Update 29.05. I Fixed Wifi for the 120Hz version. link in first post
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
What about the version for two SIM cards?
Model G8342.
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Riskypedia said:
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Click to expand...
Click to collapse
It should support Treble.
Maybe you also need to flash "Disable DM Verity" and "Magisk" after
Can be used on G8342 ? ?
Sent from my Sony Xperia XZ1 using XDA Labs
celeron1 said:
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
120Hz
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
Click to expand...
Click to collapse
Can i use this kernel with stock sony rom? (Existenz patched btw...)
ΒΕΓΑ said:
Can i use this kernel with stock sony rom? (Existenz patched btw...)
Click to expand...
Click to collapse
The Kernel is for AOSP (Linux kernel 4.9) so normally it shouldnt work with the Stock Firmware but i dont know if it works with the patched Existenz rom.
therma.cpp said:
What about the version for two SIM cards?
Model G8342.
Click to expand...
Click to collapse
Its for the single Sim.
Im not satisfied with the current State but I can build a dual sim version as well. (Building on hdd due to small SSD so it might take a while)
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
sinkoo1979 said:
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
Click to expand...
Click to collapse
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
celeron1 said:
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
Click to expand...
Click to collapse
no
yes
no
did not work
works with stock
sinkoo1979 said:
no
yes
no
did not work
works with stock
Click to expand...
Click to collapse
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
celeron1 said:
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
Click to expand...
Click to collapse
Nothing at all
sinkoo1979 said:
Nothing at all
Click to expand...
Click to collapse
Try flashing a oreo based stock rom.(or if you only tried oreo then pie), then flash gsi etc
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
don't you think it would be the least manner to put some pics of your ass when you come around with "marrying-for-asking"? XD :silly::silly:

Categories

Resources