Hotspot Tethering Virgin,Boost - Unlimited - Samsung Galaxy J3 (2016) Guides, News, & Discussio

First open playstore or your favorite apk site and download Wi-Fi Tether Router.
Install it.
Now open app and grant root access.
Then click enable Wi-Fi Tether router. It will set a default network name and pass. Which works fine.
In brief testing I tried to configure my own network name and password but had issue with device I was using to test connect finding the hotspot. I think it could have been my test device not seeing it at the time as it did see it using default network named hotspot which I connected to successfully. This works on Virgin without a subscription. Also works on boost even after 8 GB limit.

Curtis1973 said:
First open playstore or your favorite apk site and download Wi-Fi Tether Router.
Install it.
Now open app and grant root access.
Then click enable Wi-Fi Tether router. It will set a default network name and pass. Which works fine.
In brief testing I tried to configure my own network name and password but had issue with device I was using to test connect finding the hotspot. I think it could have been my test device not seeing it at the time as it did see it using default network named hotspot which I connected to successfully. This works on Virgin without a subscription. Also works on boost even after 8 GB limit.
Click to expand...
Click to collapse
Do you grant root access

Gabilollypop said:
Do you grant root access
Click to expand...
Click to collapse
Yes

Gabilollypop said:
Do you grant root access
Click to expand...
Click to collapse
How you allow grant access

Gabilollypop said:
How you allow grant access
Click to expand...
Click to collapse
You need to be rooted.
Also, this method is mandatory for me because of my use case. I use my laptop via my phone all day every day. I love it. Allowed me to update many a games on my Nintendo Switch.

Related

[Q] Successful root but no tethering

Followed instructions here and rooted phone with no problems.
Have the superuser app installed, and have installed other apps requiring superuser permissions to make sure that it was working and it is.
But when I go to enable Mobile Hotspot, I get a "validating account" (or something along those lines) in the notification bar, and after a few (20 or so) seconds I get an "account not set up for mobile hot spot" notification...
Basically the only reason I rooted my phone was to tether/use mobile hotspot. Please advise.
In Superuser delete the entry for this app and then try again. I've had a couple instances were older versions of Superuser listed an app as being authorized but it didn't have root access.
The app does not even show up in superuser
I downloaded and installed the latest version of wifi tether and it seems to be working.
But is this app required to tether? Just curious as to whether or not the built in android setting of hotspot or tethering should be working with this root.
I'm personally not too sure but I use Wifi Tether as well. It's always worked for me with no troubles so I've never tried anything different.
This app FTW!!!!
http://www.appbrain.com/app/barnacle-wifi-tether/net.szym.barnacle
Did you edit the entitlement check in the provider settings? You have to do that first to use the built in mobile hotspot app.
http://forum.xda-developers.com/showthread.php?t=1160452
Sent from my MB860
Spectre51 said:
Did you edit the entitlement check in the provider settings? You have to do that first to use the built in mobile hotspot app.
http://forum.xda-developers.com/showthread.php?t=1160452
Sent from my MB860
Click to expand...
Click to collapse
Spectre51 is correct.
Rooting does NOT automatically enable the builtin hotspot. You must remove the entitlement check or use a third party tethering app like Android WiFi Tether or Barnacle.

Wireless Tether, am I misunderstanding?

I flashed Scott's Cleanrom ICS 4.2 and followed his instructions for the wireless tether.
When I go through all of that shouldn't I be able to go online with my laptop through the wireless tether on the phone? When I go into the available wifi networks my phone doesn't show up on the list.
Am I not understanding how this works?
Thanks-Dan
C'Mon guys, help a brotha out. 175+ views and no replies?
Thanks-Dan
Well, the answer is.... yes, probably. I'm not running that ROM at the moment, but ICS gave us the ability to tether in infrastructure mode, rather than merely ad hoc.
Having said that, there are variables out there that may be causing the issues you are having. I'm sure you have double-checked the settings and have set up wireless tether per Scott's instructions. So, here are your options (IMHO):
1) Try to find another tether app (such as Barnacle) to see if that might work.
2) Try to find an updated or different version of WiFi Tether.
3) Try the many different settings in WiFi Tether to see if they work for you.
4) Try a different ICS ROM to see if it works for you. (RezROM ICS does work for me)
5) Pay for Verizon's Hot Spot.
Good luck!
Thanks for the reply. I will triple-check all the settings again and go from there.
I had a similar problem - I was unable to see my wifi network until I renamed it.
Sent from my ADR6425LVW using XDA
The way I make it work was renaming the SSD and creating a password.
Sent From Ice Covered Blasting ReZound
TRY THIS
Go to www.downloadandroidrom.com scroll down to apk and click on it.
Next click on wifiteather.
Next click on wifi_teather_v3_0-pre14.apk
Close to the bottom of the page will be a Download Here link click on it.
If your using a PC place it on the root of the sd card if your using your phone make sure unknown sources is checked in the settings>applications menu.
Next go to the market and download and install apk installer.
Open apk installer on your phone and click on <ext_sd>
Next click on wifi_teather_v3_0-pre14.apk and click install.
After it installs click open and go to the menu sceen.
Go to settings and check Routing fix.
Next click on the access control and press on enable.
next click on the main screen to start wifi tether and click allow access from superuser.
Now check your wifi on your computer Android Tether should come up click connect.
Now on your phone go back to access control and your computer name should come up.
Click on your computer name and click apply on the bottom of the screen.
This sounds like a lot but it works.
Thanks guys, I had to rename the network and set the security. I thought I could just leave it unsecured but I guess not. It works now...
Thats good I never had to do that. But that is the only reason why I rooted my phone was for the wifi tether.
But ...
... Do any these options allow other mobile devices to see your hotspot? I'm running stock on my rooted Rezound. I tried WiFi / Wireless Tether, Barnacle, Open Garden, etc ... They let my laptop connect, but not mobile devices. I actually like Sense, and I don't really want to bother with other ROMs right now ...
Any ideas?
bloodymurderlive said:
... Do any these options allow other mobile devices to see your hotspot? I'm running stock on my rooted Rezound. I tried WiFi / Wireless Tether, Barnacle, Open Garden, etc ... They let my laptop connect, but not mobile devices. I actually like Sense, and I don't really want to bother with other ROMs right now ...
Any ideas?
Click to expand...
Click to collapse
The only two ways I was able to achieve wireless tether with infracture mode was to buy the vzw hotspot feature and / or install an ICS ROM. I can attest that RezROM ICS handles the free wireless tether app flawlessly for me (after which I killed the VZW premium service).

Free WiFi Tether Help

Hi guys I really need some help here. Last night I set out to simply find a way to tether wifi from my GS3 for free. From my understanding that required me to root + download tether app with root admin rights. Apparently it appears to be more in depth than that  unless I’m missing something simple. I’ll just start by giving you my specs and tell you what I’ve done so far. Sorry for the long post.
Sprint
Galaxy S3
SPH-L710
JellyBean 4.3
Hardware L710.14
Stock kernel and rom
Followed the steps in this link to root it. It pretty much walks me through using Odin to root the phone. Looks like it also installs SuperSU for superuser access. I like the fact that it’s not too invasive, which is great because I simply want wifi tethering and am not looking for a custom kernel or rom. http://honai-android.blogspot.com/2013/11/how-to-root-galaxy-s3-sprint-sph-l710.html
Supersu
When I start the phone it says “Unfortunately SuperSU has stopped”
Downloaded the apk, ran it, launched ok, asked me to disable knox and said yes, rebooted phone, got same msg that supersu stopped, runs fine after install apk but fails after every reboot. Maybe knox is screwing with it?
No supersu update on the play store
Regardless I installed root checker and says the device has root access…
I downloaded a bunch of tethering apps I thought had root access but none actually enabled tethering.
Foxfi
When I use CDMA only (used this for troubleshooting purposes) Launch Foxfi, activate wifi hotspot, “unable to connect to data network, turning off hotspot. Your plan may not have hotspot service”’
When I use LTE/CDMA the popup message is you are not subscribed to the Hotspot service. Do you want to see subscription options?”
When I cancel out of that popup it says FoxFI hotspot ready and has the wifi icon on the notification bar but can’t find the wifi network on devices
Also it never requests superuser
1 click wifi tethering free
Launch, click enable, the notification bar says hotspot connected but then I get the same error “unable to connect to data network, turning off hotspot. Your plan may not have hotspot service”, still can’t see the network on other devices
When I use LTE/CDMA the popup message is you are not subscribed to the Hotspot service. Do you want to see subscription options?”
Also it never requests superuser
Wifi Tether TrevE Mod v3.3
Launch, opens fine, asks for superuser access, click button to enable tethering, get an error in the app that says “tethering started with errors! Please check ‘show log’”
Clicking show log gives me an error of “Unable to open log file. File does not exist.”
It still shows a message “Tethering is currently running…” under the “ongoing apps” section but still can’t find wifi network on other devices
Jtether
Launch, “says turning Wifi AP on” requests superuser access, eventually gets to the same message that says “unable to connect to data network, turning off hotspot. Your plan may not have hotspot service”
When I use LTE/CDMA the popup message is you are not subscribed to the Hotspot service. Do you want to see subscription options?”
Oddly when I launch Jtether with FoxFI on I can see the FoxFI network for literally 1 second, but not long enough to connect. This only happens when I use CDMA only. When I use LTE/CDMA it never shows up at all.
.
I’ve uncovered a lot of issues but I don’t know where to start troubleshooting. Do I start with SuperSU errors or can they be omitted? Do I start with FoxFI error troubleshooting? Maybe start with finding out why TrevE’s tether mod has errors but log file can’t be found? Maybe the root method I used wasn’t ‘deep’ enough? If so what method should I use? I thought this would be way easier but hours and hours later, here I am with no wifi tethering. I hope you guys can help.
Thnx in advance!
Wrong forum this is for i9300 only
Sent from my GT-I9300
Please anyone?? I need help!!!
evo20110 said:
Please anyone?? I need help!!!
Click to expand...
Click to collapse
Read the post above! You are in the wrong forum for the model of phone giving advice here is not advised for your phone and could brick it!!

[Guide] Root Wifi Tether for Z3v

Thanks to badjedi for pointing this out. I have verified that the X Tether module for the Xposed Framework will allow you to successfully tether using the stock app provided with the Z3v.
This is primarily for those of you who have a Grandfathered Unlimited Data Plan with Verizon Wireless and would like to not have to pay for tethering while we wait for customs roms. I apologize in advance for not being able to post links. The required files are attached.
If you are not already rooted, please follow GigaSPX's guide on how to root your Z3v.
Please download and install wifi_tether_v3_1-beta14.apk from code.google.com/p/android-wifi-tether/downloads/list
Open the installed app and verify that Disable Update-Check is selected under settings
Press the big button to start tethering. Click grant when prompted for root access. The big button will turn yellow. Press it again to stop tethering. You will get a bunch of errors during this process, this is normal. This will install the required binaries and config files to /data/data/com.googlecode.android.wifi.tether/
Restart your phone.
Verify that tether.edify is located in /data/data/com.googlecode.android.wifi.tether/conf/ using root explorer or another file manager of your choice. If it does not exist repeat the above steps.
Replace tether.edify with my modified version located in the attached tether.7z archive.
You can now tether over wifi using this app.
NOTE:
Enable WiFi-Encryption does not work.
Enable Access-Control does work and can be used to prevent unauthorized access to your network.
Make sure under Advanced Wi-Fi in your system settings the option Scanning always available is checked.
I followed your steps exactly, but it doesn't seem to be broadcasting. I don't see a wifi signal from the phone on my computer or ipod, even though it says it is broadcasting. I've uninstalled the app, cleared the data, and reinstalled app using the procedure above twice. Any suggestions?
badjedi said:
I followed your steps exactly, but it doesn't seem to be broadcasting. I don't see a wifi signal from the phone on my computer or ipod, even though it says it is broadcasting. I've uninstalled the app, cleared the data, and reinstalled app using the procedure above twice. Any suggestions?
Click to expand...
Click to collapse
Answer:
Make sure under Advanced Wi-Fi settings the option Scanning always available is checked.
Extra info:
This is needed because I haven't found the name of the wifi kernel module and this setting keeps the module loaded even when wifi is switched off. Also, if you are using windows 8.1 you may not be able to see and connect to an ad-hoc network without using the command prompt. For some reason Microsoft decided to remove this default functionality after Windows 7. Not relevant here but...It is the same for recent android kernels, no support to connect to ad-hoc networks through the Wifi settings without using shell commands.
I haven't had much time due to work, but I am certain infrastructure mode will work on this phone. I can't promise I'll get it done anytime soon though since work is going to be way to demanding for a couple months.
FYI, I've discovered that the Xposed mod X Tether works to enable the native hotspot without the entitlement check.
badjedi said:
FYI, I've discovered that the Xposed mod X Tether works to enable the native hotspot without the entitlement check.
Click to expand...
Click to collapse
+1
I sure would've loved if this discovery was made at least 2 weeks ago. The stupid entitlement checking wouldn't let me hotspot from a foreign sim card while I was in Thailand.
Thank s

Wifi Tether Router

The app works and I changed the mobile settings to ipv4..it still is using the hotspot data..does any one have all the correct settings? Thank you and thanks to all the developers for their great work.
osubeavs said:
The app works and I changed the mobile settings to ipv4..it still is using the hotspot data..does any one have all the correct settings? Thank you and thanks to all the developers for their great work.
Click to expand...
Click to collapse
I have been noticing that on the lg g4 and now the v10 that mobile my account shows small usage of mobile data but not the actual amount I used. I might just be a mobile thing. Not quite sure but I too saw the same thing. But I also watched a week's worth of anime on my laptop via router and only was a 20mb increase in hotspot usage.
What are your mobile settings and the app settings? Thanks
osubeavs said:
The app works and I changed the mobile settings to ipv4..it still is using the hotspot data..does any one have all the correct settings? Thank you and thanks to all the developers for their great work.
Click to expand...
Click to collapse
Did you go their site? They have specific instructions on the site for LG phones on T-Mobile for instance.
osubeavs said:
What are your mobile settings and the app settings? Thanks
Click to expand...
Click to collapse
I used all the same as the stock apn except I changed to ipv4...I assume you're rooted. Did you turn off the wifi scan setting under wifi?
Yes, I'm rooted and the scanning is off. I have even emailed the developer of the app. His last response was that I need a vpn.
There must be some sneaky software tracking whether you have tethering enabled. My Hotspot Data is being used/throttled no matter if I'm behind a VPN or tethering to another Android phone.
I'm rooted, removed all of the suspicious looking system apps, and set the APN settings to what I've always used before. I'm at the point of giving up and probably just going to use another phone to tether until a stable custom ROM is released.
I used to have this problem on my old Note 4 where the WiFi Tether app was working perfectly but Tmo was still tracking my data usage. The workaround that I found was to connect to a private VPN on my laptop. I used Private Internet Access to hide my IP and then I was able to tether off my phone with Tmo no longer capturing data used. I'm not sure if it will work on my new v10 though since I haven't gotten around to rooting it yet. I think there's a free Google Chrome extension that will do that same thing and for free. I forgot the name, sorry.
On my note 3 the guide I followed said I had to change the build file in a couple spots and then it worked perfect if that helps u guys out at all I really want this but can't use a vpn bc ps4 won't allow it with online gaming and my phone all I got out here in the woods

Categories

Resources