[KERNEL] [blu_spark r184 unified OP5/5T] [OOS 9.* / pie custom ROMs] - OnePlus 5T ROMs, Kernels, Recoveries, & Other Dev

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Powered by Ubuntu 18.04.3 x86_64 (sparky VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with custom toolchain blu_gcc-9.2.0 (cortex-a73.cortex-a53 targeted, build with latest Crosstool-NG from GCC-9.2.0 snapshot)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish OP5 builds based on OnePlusOSS/android_kernel_oneplus_msm8998
Systemless installer (doesn't touch system partition, OTA friendly - Nougat only), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
No OC, use 300HZ kernel timer frequency
msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS
Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
Disabled hotplug, also on low battery levels (CTL and BCL)
Optimized crypto routines
Swap and adaptive LMK off by default, 60 apps on background by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and reworked GPU driver (goes to idle @ 180MHz)
adrenoboost enabled by default at medium level
KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
KLAPSE support (v5.0)
DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
Compatible with Kernel Adiutor, EXKM, FKM and others
DOWNLOAD KERNEL ZIP​Extras download location​(No mirrors please)​
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
OnePlus 5T development unit donated by OnePlus. Big shouts to them
Very proud of being on the OnePlus Developer Program, special thanks to Adam K. for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for OP5/5T unified, Kernel for the OnePlus 5T
Contributors
eng.stk
Source Code: https://github.com/engstk/op5
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r184 unified pie
Stable Release Date: 2019-10-19
Current Beta Version: r180 unified pie
Beta Release Date: 2019-08-24
Created 2017-11-17
Last Updated 2019-10-18

blu_spark r51 unified
All right crew!
First kernel for the 5T is up, fastlane style :highfive:
This is an initial build, tested only on OP5. It is a baseline for 5/5t unified installer (similar of 3/3T).
For now, seems like fw updates from OOS 4.7 are needed for some stuff, so it is only working 95% on the OP5 OOS 4.5.* (FPR doesn't work).
Don't flash this on OP5 for now. On 5T all should be working just fine.
So, keep in mind that it's tested on the OP5, on the 5T it's not because I don't have the device just yet.
Backup and take all the precautions you can think of, if you're cat get's on fire you're on your own
blu_spark_r51-oos_op5-op5t_79c5b56.zip
build: use newest and improved blu_naro-7.2, build from developer snapshot Linaro GCC 7.2-2017.10, with updated components and improvements/fixes
Synchronize codes for OxygenOS 4.7.1
full rebase and features bringup from OP5
drivers: misc: fix a couple build errors
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
Meaning, if using anything besides stock and stable OOS don't bother posting about it.
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free

bronderb said:
Wow, that was quick!
Click to expand...
Click to collapse
had it running since yesterday :silly:

Phone isn't even released to public yet.
eng.stk is a legend.
From my OP3T

(No mirrors allowed)
Click to expand...
Click to collapse
Are you aware that you violate the terms of the GPL with this?

Rosa Elefant said:
Are you aware that you violate the terms of the GPL with this?
Click to expand...
Click to collapse
For security purposes the place for downloads is this xda repo for the compiled stuff.
Source code is available for anyone to use and build for themselves.
Don't see any issue with that, this is only a cortesy.

The issue is that the GPL enforces you to allow anyone to distribute any derivative works - including "the compiled stuff" - in any way they want. That also means mirrors. So no, "no mirrors allowed" violates the GPL. You might want to replace that by "please don't mirror" or something.
(I know this is nitpicking in a way. I was just wondering.)

Rosa Elefant said:
The issue is that the GPL enforces you to allow anyone to distribute any derivative works - including "the compiled stuff" - in any way they want. That also means mirrors. So no, "no mirrors allowed" violates the GPL. You might want to replace that by "please don't mirror" or something.
(I know this is nitpicking in a way. I was just wondering.)
Click to expand...
Click to collapse
I'm not enforcing anything, this is valid for xda links posted, as a cortesy and for security. Word play it's what it is, I can change if it suits you better.
Other than that you can burn CDs with it and send to your friends if you like

WHAT!
You're a Living Legend @eng.stk

Rosa Elefant said:
Are you aware that you violate the terms of the GPL with this?
Click to expand...
Click to collapse
Rules are made to be broken. Not every rule needs to be enforced when it wont matter and harms nobody. Like he said its a courtesy thing stop doing the moderation for XDA they do a good job themselves. Keep OT out as much as possible. Some people would rather see this thread get support instead of strikes from "rules"

You know, you could just send me a PM instead of further distracting this topic. But FWIW, a legally binding licensing term is not a "rule".

eng.stk said:
Advanced filesystem: If you want to use f2fs, do the following (backup your data to external source before attempt this, it will erase all your sdcard data)
Go to Wipe -> Advanced Wipe -> Select only Data -> Repair/Format File system -> Change partition type to f2fs
Go to Wipe -> Advanced Wipe -> Select only Cache -> Repair/Format File system -> Change partition type to f2fs
Reboot and profit
To be back on ext4, just do the same but choose ext4 instead
Click to expand...
Click to collapse
Does recommended or not if i also partition /system as f2fs?

exodius48 said:
Does recommended or not if i also partition /system as f2fs?
Click to expand...
Click to collapse
No, you can only use it on data.
I prefer ext4 nowadays.
Sent from my blu_spark'd OP5

eng.stk said:
No, you can only use it on data.
I prefer ext4 nowadays.
Click to expand...
Click to collapse
Why's that..? You are the reason I was using F2FS due to your regular updates on kernel / recovery. Faced bad exp on it?

arvindgr said:
Why's that..? You are the reason I was using F2FS due to your regular updates on kernel / recovery. Faced bad exp on it?
Click to expand...
Click to collapse
Some instability on latest times and on fast UFS devices there's no much performance difference.
Also I don't upstream f2fs on 4.4 because of FBE and crypto stuff, prefer to leave as it is and just add security patches when applicable.

Most likely because nowadays Memory is so fast (especially with UFS2.1) that it doesn't really matters and isn't worth the trouble.
I tested it back on my days with the OPO and Nexus 6 and never saw any real benefit for most parts and they haven't have had UFS2.1.
So don't expect too much of a performance gain with F2FS.
EXT is a mature system, more mature than F2FS. And sometime safety counts more than fractions of seconds of starting speed for a bigger application.

Are there wake-up gesture options in the Kernel?

xocomaox said:
Are there wake-up gesture options in the Kernel?
Click to expand...
Click to collapse
Gestures are the same as stock.

Thanks for coming man I just order my 5t

dabug123 said:
Thanks for coming man I just order my 5t
Click to expand...
Click to collapse
Liquid remix for 5t? Haha just joking nice that you're getting one too

Related

[EOL] [OP5T] [OOS/CUSTOM 8.1.0] [4.4.140] [CLANG 7.0] Flash Kernel v4.29

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
As of July 11th, 2018, this kernel has been discontinued as I have sold the device. Since I don't recommend using a kernel that is not constantly updating, I suggest looking at RenderZenith if you are on OxygenOS or Singularity if you are on a custom ROM.
Hello everyone, this is my personal kernel for the OnePlus 5T. While I am not a super star kernel developer, I do know my way around it. My philosophy on kernels is pretty simple:
Follow stable Linux always. Updates will be delivered within 24 hours of their release to kernel.org.
Stable kernel rules work best (only add small things when possible).
Security and stability are paramount. Vulnerabilities are patched as soon as they are disclosed.
Features will be added only as needed (I have a list of things in the FAQ I will NOT add, even if requested).
Hopefully you enjoy
Couple of quick notes for this thread: I do not currently own a OnePlus 5T (I own a OnePlus 5) but I have a couple of reliable testers and the tree is unified so there should be no issues. Since the builds are unified, the zip name and kernel version will show OP5.
Important thread information!
I refuse to acknowledge/respond to bug reports that do not include clear steps to reproduce, a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues). Follow this guide to do this.
Keep things civil, I do NOT tolerate flaming of any kind.
OT is allowed.
Features
NOTE: This list fluctuates with versions, it will not always been 100% up to date
Here are the major features of the kernel (feel free to explore Github)
Up to date with OOS (5.1.3 and Open Beta 10)
Custom branch compatible with most 8.1.0 ROMs (see below)
Up to date with the latest stable Linux version (4.4.140)
Up to date with the latest CAF tag for Oreo (LA.UM.6.2.r1-09300-sdm660.0)
Mainline patches from Linux, focusing on bug fixes/security
Mainline CFQ scheduler improvements
Kernel hardening from CopperheadOS
Several subsystems converted to use power efficient workqueues
The following user facing features:
Accidental touch protection on hardware keys
Backlight dimmer
KCAL color control
Maple I/O scheduler
Sweep2sleep
Sound control
Wakelock control
Latest WireGuard snapshot (0.0.20180708)
Westwood as the default TCP algorithm
Built with a self compiled Clang 7.0 toolchain with a local initialization sanitizer (build script here, previously built with the latest Google Clang 6.0 toolchain here)
Hides bootloader unlock from SafetyNet (can still fail through other means)
Disables dm-verity
Does NOT modify decryption status
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads
Primary: https://github.com/nathanchance/op5/releases
NOTE #1: FOR THIS DEVICE, ONLY 3.x AND ABOVE ARE COMPATIBLE, MEANING NO NOUGAT SUPPORT!!
NOTE #2: The newer builds of 3.x and 4.x are unified! The zip will dynamically detect if you are on OxygenOS or a custom ROM and flash the correct kernel image.
NOTE #3: 3.x is for OOS 5.x 8.0, 4.x is for OOS 5.x 8.1
Installation
Through TWRP:
If you are on stock:
If you are on the stock kernel: flash the kernel zip and reboot
If you are on a custom kernel: flash the stock boot image matching your build number, flash the kernel zip, and reboot. I would also recommend dirty flashing the latest OOS zip as well.
If you are on a custom ROM:
If you are on the kernel that came with your ROM: flash the kernel zip and reboot
If you are on a custom kernel: dirty flash your ROM zip, flash the kernel zip, and reboot
Upgrading from one Flash version to the other:
Just flash the kernel zip and reboot
Through Franco Kernel Manager (requires root):
Getting back to stock if necessary (only needed if coming from another kernel):
Grab the latest stock boot image from the OTA zip.
Click on "Manual flasher", select the boot image, and select "Just Flash".
Reinstall Magisk through Magisk Manager (Install -> Direct Install).
If on stock or upgrading from another Flash release:
Download the zip (and optionally, the md5) from the link above
Tap on "Manual flasher"
Navigate to Download
Tap on the zip, select Auto-flash, and choose one of the options.
Reboot and enjoy!
Changelog
Latest release post!
GitHub serves as the ultimate changelog, links are at the bottom of this post
Frequently asked questions
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: What ROMs are compatible with the custom builds?
1.2 A: As of March 14th, 2018, I have confirmed the following ROMs are 100% compatible with Flash:
LineageOS
Dirty Unicorns
Codename: Phoenix
GZOSP/Validus
OmniROM
AICP
If you are using a ROM with no issues, let me know and I'll add it here! If you are having issues, following the above steps and I'll attempt to fix whatever incompatibility there is. If I can't do it without breaking LineageOS/Dirty Unicorns, you're out of luck.
1.3 Q: Can you add xyz feature?
1.3 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration. I will NOT add the following:
Overclocking or underclocking of CPU or GPU
Undervolting
Any governors other than interactive
Any schedulers other than cfq and maple
Anything that compromises performance
1.4 Q: How do I control the kernel?
1.4 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience.
To control the user visible features of the kernel listed above, I recommend using either @franciscofranco's Kernel Manager for Franco Kernel (which has Flash Kernel support for downloading and automatically flashing the latest kernel zip along with some nice, user friendly ways for tuning the kernel) or @flar2's EX Kernel Manager.
1.5 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.5 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
1.6 Q: I am not getting notifications on OOS, what is the cause?
1.6 A: This could be for a couple of reasons. If you haven't already, disable advanced optimizations in Settings > Battery > Battery optimization > Three menu dots. Another reason may be that I ship a compiled Wi-Fi module. I do this for two reasons: I want to have the latest fixes and I enable CONFIG_MODULE_SIG, which checks the signature of a module before loading it for security reasons. This could introduce some incompatibility with OOS, which is something I have no control over.
Thanks to:
The various other developers for their patches (specifically @zx2c4 for WireGuard and @joshuous for fixing the notification delay on Wi-Fi)
@osm0sis for AnyKernel2
@franciscofranco for adding Flash Kernel support to Kernel Manager for Franco Kernel
@adinkwok for being a bro
@phantom146 for the thread banner
All of you guys for viewing the thread
A note about donations
Quite a few people have asked to donate to me in the past and I have turned them down. I am not in this for the money, this is my hobby, something I truly enjoy. If you truly want to donate to something (it is not expected in the slightest), I recommend an entity like the Open Source Initiative, the Free Software Foundation, XDA, or any one of the people I have thanked in the OP. Additionally, you are free to copy any and all of my work; the only thing I request is that you not ask for donations as well (though I can't really enforce this lol). Thank you.
Kernel source links
8.0.0 (OxygenOS - 2.x): https://github.com/nathanchance/op5/commits/8.0.0-oos
8.0.0 (OxygenOS - 3.x) and 8.1.0 (custom ROMs - 3.x): https://github.com/nathanchance/op5/commits/8.x-unified
AnyKernel (8.x): https://github.com/nathanchance/AnyKernel2-archive/commits/op5-flash-8.x
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
Wew, great!
It's officially lit in this forum
http://nchancellor.net/downloads/kernels/op5/8.0.0/oos/stable/
Above link right?
Welcome and Thanks, I'm not seeing OP5t folder, is this unified ? @nathanchance
shafi31 said:
http://nchancellor.net/downloads/kernels/op5/8.0.0/oos/stable/
Above link right?
Click to expand...
Click to collapse
mukesh22584 said:
Welcome and Thanks, I'm not seeing OP5t folder, is this unified ? @nathanchance
Click to expand...
Click to collapse
Yes, read the intro lol.
Sent from my Pixel 2 XL using XDA Labs
Nice! Glad to see you here man
Nice to see the flash here. I love your work during the Nexus 6p days.
Welcome ninja/ the flash :highfive: now i am more motivated
Mine!
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Nice! First running OB1 kernel. Thank you!
welcome. and who said your not a rockstar developer? you were amazing way back shamu days bru...
and @akhilnarang is also here....
Awesome mate[emoji108] Been a while since using flash on my bullhead [emoji6]
Gesendet von meinem ONEPLUS A5010 mit Tapatalk
Awesome kernel.. Running it on my op5t everything is fine and working..Thanks @nathanchance for support
i try the non OOS version, the 8.0 kernel doesn't work at all, it get reboots to fastboot bootloader. and the 8.1 kernel is working fine, but i haven't test it intensively yet.
WOW...Welcome to the T -Zone
Hi man, thanks a lot, i love your kernel
Woot woot!! Flash Kernel FTW :highfive:
marko94 said:
Awesome kernel.. Running it on my op5t everything is fine and working..Thanks @nathanchance for support
Click to expand...
Click to collapse
Are you running it in combination with Liquid Remix Rom on your OP 5T ?
SlyUK said:
Are you running it in combination with Liquid Remix Rom on your OP 5T ?
Click to expand...
Click to collapse
nope, atm oreo oos beta

[KERNEL] [blu_spark r16 View 10] [8.1 EMUI / custom ROMs]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom toolchain Linaro GCC 4.9.4 2017.01
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish builds from BKL-L04 EMUI8.1.0.107 source drop
Systemless installer (doesn't touch system/vendor partition, OTA friendly)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and miscellaneous fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
cpu-boost CAF driver ported for kirin with some added improvements (Dynamic Stune Boost included)
No OC, use 300HZ base timer frequency
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS, CIFS & NFS) (WIP)
Removed verify and doesn't force encryption, patched SafetyNet flags to pass CTS (WIP)
Stock thermal driver by default
Optimized crypto routines (WIP)
Swap and ZRAM off by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel an FPR) (WIP)
Graphic stack fixes and reworked GPU driver
USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control (WIP)
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP (No mirrors please)​
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock EMUI with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including EMUI based ones) you're on your own. I'm only interested on debugging stuff in stock and stable EMUI.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless).
You can backup your ramdisk.img and kernel.img with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Honor View 10 development unit donated by Honor USA. Big shouts to them
Special thanks to @[email protected]_USA for being such a supportive person.
XDA:DevDB Information
blu_spark kernel for Honor View 10, Kernel for the Honor View 10
Contributors
eng.stk
Source Code: https://github.com/engstk/view10
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r16
Stable Release Date: 2018-05-31
Current Beta Version: r8
Beta Release Date: 2018-04-30
Created 2018-04-29
Last Updated 2019-11-29
blu_spark r8
All right crew!
blu_spark has made to Honor View 10!
First build is up :highfive:
Lot's of stuff merged in, we now have a nice and stable baseline to work with.
More of the usual missing goodies to come in future builds :fingers-crossed:
It was tested in L04 model with latest EMUI 8.1.0.105 so any other FW your results may vary.
To install you must use TWRP, @Pretoriano80 Unofficial TWRP is recommended.
You must have stock (or rooted) ramdisk and kernel before install.
blu_spark_r8-view10_66f0c4b.zip
build: use Linaro GCC 4.9.4-2017.01 for now
First kernel build with too much stuff to talk about, check git
ramdisk and installer changes to match View 10 stuff
Click to expand...
Click to collapse
Keep it real, keep it true, keep it blu :highfive:
Keep in mind: I will give no active support for custom ROMs (including EMUI based ones).
Meaning, if using anything besides stock and stable EMUI don't bother posting about it.
I am only interested on debugging stuff in stock and stable EMUI (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
nice glad to see linaro gcc was usable and was just something odd in my end... lol
for some odd reason on ubertc was usable as gcc fir me...
Nice job....
Does this support changing charging rate in KA?
Can i install this on BKL-L09 model?
kevp75 said:
nice glad to see linaro gcc was usable and was just something odd in my end... lol
for some odd reason on ubertc was usable as gcc fir me...
Click to expand...
Click to collapse
Yeah well try to check if you have any cruft or leftovers derping, I encountered similar situation when building.
venreddy said:
Nice job....
Does this support changing charging rate in KA?
Can i install this on BKL-L09 model?
Click to expand...
Click to collapse
No charge changes at the moment.
If fw is 8.1 should work, otherwise I don't know. Backup, try and let us know.
Sent from my blu_spark'd Honor View 10
eng.stk said:
Yeah well try to check if you have any cruft or leftovers derping, I encountered similar situation when building.
Click to expand...
Click to collapse
yeah, thought that too... did the same on fresh source download too tho
Got it to compile using Uber TC tho, so maybe I'll run with it and see what I can break LOL :laugh:
Woot
eng.stk said:
No charge changes at the moment.
If fw is 8.1 should work, otherwise I don't know. Backup, try and let us know.
Sent from my blu_spark'd Honor View 10
Click to expand...
Click to collapse
BKL-L09 is still with 8.0 emui.
I doubt this will work, but will try this later. It would not brick my phone right? Just need to back up stock kernel and fish it, if phone doesn't boot then flash backedup kernel. Right?
venreddy said:
BKL-L09 is still with 8.0 emui.
I doubt this will work, but will try this later. It would not brick my phone right? Just need to back up stock kernel and fish it, if phone doesn't boot then flash backedup kernel. Right?
Click to expand...
Click to collapse
backup both kernel and ramdisk
Rommco05 said:
Not bootnig on L09 LOS, stock kernel L04 don't boot too
Click to expand...
Click to collapse
fastboot flash your stock kernel.img and ramdisk.img
Rommco05 said:
Not bootnig on L09 LOS, stock kernel L04 don't boot too
edit: just telling
Click to expand...
Click to collapse
Thanks for testing. Hope Honor updates all the phones from all regions to Android 8.1 besides L04 devices :fingers-crossed:
Fragmentation is never good...
can i flash on BLA-L29 with emui 8 oreo 8.0?
fatalynx said:
can i flash on BLA-L29 with emui 8 oreo 8.0?
Click to expand...
Click to collapse
backup your ramdisk.img and kernel.img and tell us
(note, if you read the thread a little [like the couple posts above you], you'd see that it really only works on the US version, but, do what you want....)
Try to enable bonding mode inside defconfig, most of the new wifi driver support this option
scafroglia93 said:
Try to enable bonding mode inside defconfig, most of the new wifi driver support this option
Click to expand...
Click to collapse
I can checknit out, but some OEM don't enable that on 2.4G because it can introducr wifi issues with some APs.
Sent from my blu_spark'd Honor View 10
kevp75 said:
backup your ramdisk.img and kernel.img and tell us
(note, if you read the thread a little [like the couple posts above you], you'd see that it really only works on the US version, but, do what you want....)
Click to expand...
Click to collapse
will give it a shoot tq btw..
kevp75 said:
yeah, thought that too... did the same on fresh source download too tho
Got it to compile using Uber TC tho, so maybe I'll run with it and see what I can break LOL :laugh:
Click to expand...
Click to collapse
cross-compile is hardcoded in tzdriver/Makefile and will only use aarch64-linux-android-
https://github.com/UchihaDev/HyperPlus/commit/f04adc459eb60bcc1e22158ef6ae834e24929232
ajituchiha said:
cross-compile is hardcoded in tzdriver/Makefile and will only use aarch64-linux-android-
https://github.com/UchihaDev/HyperPlus/commit/f04adc459eb60bcc1e22158ef6ae834e24929232
Click to expand...
Click to collapse
Appreciate it mate.
Thanks for helping the noob compiler lol
fatalynx said:
will give it a shoot tq btw..
Click to expand...
Click to collapse
And already failed??
Sent from my HUAWEI BLA-L29 using XDA Labs
Tried on bkl-al20, cannot enter tne system.

[EOL] [MARLIN/SAILFISH] [9.0.0] [3.18.125] [CLANG 7.0] Flash Kernel 2.10

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
NOTE: This kernel is currently not being updated. Please use another more up to date one if possible.
Hello everyone, this is my personal kernel for the Pixel (sailfish) and Pixel XL (marlin). While I am not a super star kernel developer, I do know my way around it. My philosophy on kernels is pretty simple:
Follow stable Linux always. Updates will be delivered within 24 hours of their release to kernel.org.
Stable kernel rules work best (only add small things when possible).
Security and stability are paramount. Vulnerabilities are patched as soon as they are disclosed.
Features will be added only as needed (I have a list of things in the FAQ I will NOT add, even if requested).
Hopefully you enjoy
Important thread information!
I refuse to acknowledge/respond to bug reports that do not include clear steps to reproduce, a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues). Follow this guide to do this.
Keep things civil, I do NOT tolerate flaming of any kind.
OT is allowed.
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the October security update (android-9.0.0_r0.21)
Up to date with the latest stable Linux version (3.18.125)
Latest binder and sdcardfs commits from kernel/common
Several subsystems converted to use power efficient workqueues
Mainline improvements to CFQ
Kernel hardening from CopperheadOS
Westwood as the default congestion algorithm
Sultanxda's wake boost driver
The following user facing features:
Backlight dimmer
Color control
HBM
Maple I/O scheduler
Sound control
USB fast charging
Wake gestures
Wakelock blocking
Vibration control
Latest WireGuard snapshot (0.0.20181018)
Built with a self compiled Clang 7.0 toolchain with a local initialization sanitizer
Hides bootloader unlock from SafetyNet (can still fail through other means)
Available to flash with AnyKernel2 (thanks to @osm0sis) [zip will automatically detect when Magisk is installed and patch the kernel so reflashing Magisk becomes unnecessary]
Downloads
Primary: https://github.com/nathanchance/marlin/releases
NOTE: Although the kernel's name is Marlin, it is for both Marlin and Sailfish (fully unified).
Installation
NOTE: These sets of steps should work for both initial installations and upgrades. All sane kernels on this device are just replacing the kernel image and maybe adding some cmdline parameters, which this kernel won't care about. If there are ANY issues after flashing this kernel over another, be sure to flash the stock boot image for your ROM, TWRP + Magisk if you want them, then the kernel before reporting any issues.
Through TWRP:
See their instructions for further information, you can install the kernel with TWRP temporarily booted or permanently installed.
Boot into TWRP.
Flash the zip (flashing Magisk is not necessary if you already have it installed).
Reboot and enjoy!
Through FK Kernel Manager (requires root):
Download the zip (and optionally, the md5) from my server
Tap on "Manual flasher"
Navigate to Download
Tap on the zip, select Auto-flash, and choose one of the options.
Reboot and enjoy!
NOTE: On custom ROMs, you must do a reboot between installing the ROM and installing the kernel/Magisk on a clean flash otherwise you may end up in a bootloop...
Changelog
Latest release post!
Commits
Frequently asked questions
1.1 Q: I am having an issue, can you help me?
1.1 A: I am not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue, following this guide. If I can't reproduce reliably, I'm not going to fix the issue.
1.2 Q: Can you add xyz feature?
1.2 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not go digging super hard for commits and I will ignore requests that don't include this information. I won't promise that I will merge every request but I will always take it into consideration. I will NOT add the following:
Overclocking or underclocking of CPU or GPU
Undervolting
Any governors other than sched/schedutil
Any schedulers other than cfq
Anything that compromises performance
1.3 Q: How do I control the kernel?
1.3 A: I want to be very clear: the kernel does NOT need to be tuned to be useful. Most of the improvements are under the hood and don't require any user intervention to take advantage of them. In fact, if you don't know what you are doing, you could degrade the experience.
To control the user visible features of the kernel listed above, I recommend using either @franciscofranco's FK Kernel Manager (which has Flash Kernel support for downloading and automatically flashing the latest kernel zip along with some nice, user friendly ways for tuning the kernel) or @flar2's EX Kernel Manager.
1.4 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.4 A: The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone.
Thanks to:
The various other developers for their patches
@osm0sis for AnyKernel2
@franciscofranco for adding Flash Kernel support to FK Kernel Manager
@phantom146 for the thread banner
All of you guys for viewing the thread
A note about donations
Quite a few people have asked to donate to me in the past and I have turned them down. I am not in this for the money, this is my hobby, something I truly enjoy. If you truly want to donate to something (it is not expected in the slightest), I recommend an entity like the Open Source Initiative, the Free Software Foundation, XDA, or any one of the people I have thanked in the OP. Additionally, you are free to copy any and all of my work; the only thing I request is that you not ask for donations as well (though I can't really enforce this lol). Thank you.
Kernel source links
8.1.0/P Preview 2-5: https://github.com/nathanchance/marlin/tree/oreo-m4
9.0.0: https://github.com/nathanchance/marlin/tree/pie
DISCLAIMER: I openly welcome off topic in my threads. Mods, please do not clean off topic discussion and users, do not complain about off topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
Reserved
You may notice the feature list is a little bare. I wanted to get a nice solid base formed first then add features in as requested. Please read the thread before requesting a feature; if it is already present, just press thanks.
In theory, this should work on P as I have merged the source in. I have only tested on Oreo though.
Feel free to join Telegram for beta builds and hanging out https://t.me/joinchat/C1UAJ0OCAoJtDRo-hhkjhw
nathanchance said:
You may notice the feature list is a little bare. I wanted to get a nice solid base formed first then add features in as requested. Please read the thread before requesting a feature; if it is already present, just press thanks.
In theory, this should work on P as I have merged the source in. I have only tested on Oreo though.
Feel free to join Telegram for beta builds and hanging out https://t.me/joinchat/C1UAJ0OCAoJtDRo-hhkjhw
Click to expand...
Click to collapse
Awesome! Thank you Nathan...
Add KCAL Color Control and I'm in. All I've wanted for so long is a stock like stable kernel with KCAL so I can tweak the display!
I ran your flash kernel the short time it was available for my old Nexus 6, happy to see this kernel here.
Thank you for bringing this to marlin!!
Chimaira33 said:
Add KCAL Color Control and I'm in. All I've wanted for so long is a stock like stable kernel with KCAL so I can tweak the display!
I ran your flash kernel the short time it was available for my old Nexus 6, happy to see this kernel here.
Click to expand...
Click to collapse
Sure, I can add that always happy to see returning users!
nathanchance said:
Sure, I can add that always happy to see returning users!
Click to expand...
Click to collapse
Was looking at your taimen post and was thinking to myself I wish we had this on sailfish/Marlin. Can you add schedutil?
I tried another kernel on Android P preview 2 and had some problems. You noted that this kernel includes the source links for preview 2. The other I think only had preview 1. Would there be a difference?
shagbag913 said:
Was looking at your taimen post and was thinking to myself I wish we had this on sailfish/Marlin. Can you add schedutil?
Click to expand...
Click to collapse
I plan to look into EAS 1.5 tomorrow or this weekend I will look at adding features tonight.
Gordietm said:
I tried another kernel on Android P preview 2 and had some problems. You noted that this kernel includes the source links for preview 2. The other I think only had preview 1. Would there be a difference?
Click to expand...
Click to collapse
Yes although I don't know how much offhand.
@nathanchance I haven't had a change to flash this yet, I really enjoyed this from my 6P days. Can you tell me if HBM and backlight dimmer are available? If not, could I request them? Any wakelock blocks available? Possibly fingerprint scanner boost--NSFW Kernel has this.
Thanks, I was really missing Flash Kernel
nathanchance said:
I plan to look into EAS 1.5 tomorrow or this weekend I will look at adding features tonight.
Click to expand...
Click to collapse
That would be great, thank you for your work.
Akomack said:
@nathanchance I haven't had a change to flash this yet, I really enjoyed this from my 6P days. Can you tell me if HBM and backlight dimmer are available? If not, could I request them? Any wakelock blocks available? Possibly fingerprint scanner boost--NSFW Kernel has this.
Thanks, I was really missing Flash Kernel
Click to expand...
Click to collapse
I'll add HBM, backlight dimmer, and wakelock blocking. I'll take a look at fingerprint scanner boosting; however, the few implementations I have seen floating around lately seem like they don't work well.
shagbag913 said:
That would be great, thank you for your work.
Click to expand...
Click to collapse
Something occurred to me, the stock power HAL on this device doesn't support schedutil. Custom ROMs can add support easily so I'll still add it but I won't set it as default.
nathanchance said:
Something occurred to me, the stock power HAL on this device doesn't support schedutil. Custom ROMs can add support easily so I'll still add it but I won't set it as default.
Click to expand...
Click to collapse
Sounds good
nathanchance said:
I wanted to get a nice solid base formed first then add features in as requested.
Click to expand...
Click to collapse
I would love double tap to wake, or am I just missing it? Really looking forward to trying this out, thanks
Nevermindthelabel said:
I would love double tap to wake, or am I just missing it? Really looking forward to trying this out, thanks
Click to expand...
Click to collapse
It will be in the next build, I'm about to seed out a beta if you want to grab it and test that it works fine.
nathanchance said:
It will be in the next build, I'm about to seed out a beta if you want to grab it and test that it works fine.
Click to expand...
Click to collapse
Running the Beta right now. So far no issues. Thanks for adding Kcal! I wanted to ask about the wq_power_savings option. What the heck does that do?
Chimaira33 said:
Running the Beta right now. So far no issues. Thanks for adding Kcal! I wanted to ask about the wq_power_savings option. What the heck does that do?
Click to expand...
Click to collapse
Here is a nice technical article from LWN: https://lwn.net/Articles/731052/
The tl;dr is these tasks get placed whenever is optimal rather than on a specific CPU core.
Sent from my Pixel 2 XL using XDA Labs
Hey thanks man. I've searched on my own before but came up with nothing.
Chimaira33 said:
Hey thanks man. I've searched on my own before but came up with nothing.
Click to expand...
Click to collapse
I'm always happy to answer technical questions
Sent from my Pixel 2 XL using XDA Labs

[KERNEL][OP7/7PRO][18 SEP][ SkyDragon [OOS10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back again!
You may remember me from my SkyDragon roms/kernels and HolyDragon kernels for OP6/OP6T/OP3/N6/M8/M7/G3 among other devices. This is the latest sm8150 kernel+audio source from OnePlus. For now just some latency reductions and a couple listed features while I work on optimizing it. No plans for any overclocking cpu/gpu that slowly kill your phone. No plans to upstream anything as most of the time there's either no benefit at all or it performs worse than stock. I don't care about f2fs and recommend only ext4 as the stock filesystem. My only goal, as always, is to get the best performance *and* battery life out of our phone as possible. Kernel zip uses Anykernel3 by Osm0sis to install so no fear of losing root or ramdisk changes or anything.
~*~*Information*~*~
Flashable Kernel zip supports all OnePlus 7 and OnePlus 7 Pro(non-5G) devices running OOS Stable 10.x
Kernel source is based on official OnePlus 7/7Pro unified source code to ensure best performance
No user setup required - Optimal settings already applied
Compiled with Google Clang 9.0.5(r353983e) and gandalf02's aarch64-9.1 GCC
~*~*Features*~*~
250HZ Kernel
ExFat Support
No user clock-speed modifications
BBR TCP Congestion Profile (set as default
CRC Check Toggle-able (disabled by default)
Power Efficient Workqueue's Toggle (enabled)
Maple IO Scheduler (set as default)
Flar2's Wake Gesture support
KCAL
Boeffla Wakelock Blocker
Latest WireGuard Built-In
~*~*Credits and Thanks*~*~
xanaxdroid
SultanXDA/KernelToast
RandomBlame/Kelsirae
Pafcholini
MLucy
Flar2
MyFluxi
DespairFactor
FranciscoFranco
KDrag0n
Osm0sis
Mauronofrio
Joshuos
dabug123
~*~*Downloads*~*~
To Install :
Make sure bootloader is unlocked
Make sure you're on latest TWRP
Download this kernel zip
Reboot device to TWRP
Find this zip and install
Reboot to system and enjoy!
---
Could also copy zip or image to usb otg drive and flash in twrp
Do not flash with EXKM app
For Oneplus 7/7 Pro(Non 5G) and Oneplus 7T/7T Pro(Non 5G)
SDK_OP7TP_OOS10_RV.10.1
Flashable Zip
AFH
GDrive
--
Telegram Group
TG
Discord Server
Discord
~~~~~~~~~~~~~~~~~~~~~~~~
You can find changes(changelog) by looking at my posted source. You can also find my custom toolchain's, crosstool-ng, and other sources listed there. Any bug reports require logcats/dmesg, thanks!
~*~*Donations*~*~
If you want to donate to my coffee fund, I prefer any cryptocurrency over paypal but either is fine.
Donate with Coinpayments
or just use paypal, thanks!
XDA:DevDB Information
[KERNEL][OP7/7PRO][18 SEP][ SkyDragon [OOS10], Kernel for the OnePlus 7 Pro
Contributors
HolyAngel, Liam_Davenport, Imotep95
Source Code: https://gitlab.com/holyangel/OP7.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Current
Stable Release Date: 2019-05-23
Beta Release Date: 2019-05-21
Created 2019-05-21
Last Updated 2020-09-18
SkyDragon OOS Magisk Mod
Reserved
Reserved
Frequently Asked Questions
Before issues should be reported:
1. Rom needs to be clean flashed
2. No Xposed, AKT Profiles, Helix Engine, other magisk modules, or other mods, etc.
3. Do not restore any apps with TiBu or Swift or some other app restoring application
4. No Substratum themes installed
If you can still reproduce the issue you're having:
1. Logcat/logs must be provided with your report in order to receive any support.
2. I also need a full description of what happened, what you were doing when it happened, and a way to guarantee-ably reproduce the problem. If I or my testers cannot reproduce it, not only will it likely not get fixed, it likely isn't even an issue with the rom/kernel.
3. Screen record or picture of the issue is also helpful.
If you're not familiar with how to get logs, you can reference this great XDA Thread here.
If you can't give logs for errors or possible bugs, I literally cannot help you solve it.
Can't wait to try this out! Thanks!!
This could be a really dumb question, but could the zip be flashed in TWRP from a USB DRIVE..?
Or within an app like EX Kernel Manager?
reaper000 said:
This could be a really dumb question, but could the zip be flashed in TWRP from a USB DRIVE..?
Or within an app like EX Kernel Manager?
Click to expand...
Click to collapse
Not dumb at all, you could totally do either of those to flash it :good:
Wireguard support?
JedixJarf said:
Wireguard support?
Click to expand...
Click to collapse
No and won't be until they can pass a security audit. Says right on their site not to rely on their code until they do.
HolyAngel said:
No and won't be until they can pass a security audit. Says right on their site not to rely on their code until they do.
Click to expand...
Click to collapse
No problem thanks ?
Bacc at it again! Great job!
Excellent! I'm assuming Skydragon ROM eventually =).
SoullessMexican said:
Excellent! I'm assuming Skydragon ROM eventually =).
Click to expand...
Click to collapse
Yes will come when it's ready
Wouldn't you think that the CRC toggle is obsolete on any Oneplus device you support.
HolyAngel said:
CRC Check Toggle-able (disabled by default)
Click to expand...
Click to collapse
Hey buddy,
I was having a look at CRC check and what it does.
https://gitlab.com/HolyAngel/op7/commit/818f89d20f197ddf81aa2c8a40551b96173f2c2e
I've noticed your commit is in the mmc driver but given that we have UFS3.0 (not emmc 5.1) and that we don't have a micro SD slot, isn't this a worthless change because we will never be using mmc based storage?
Regards,
Ravi
Sent from my OnePlus7Pro using XDA Labs
Telegram Group
Are there any telegram groups for this kernel/rom?
@HolyAngel
Welcome & thank you.
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Hirs_E_Fruit said:
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Click to expand...
Click to collapse
If the same as on OP6, then you can dismiss it on each reboot. Last year it took a couple of weeks to figure out what caused it and it was subsequently addressed. It doesn't have any impact on the working of your phone.
Sent from my OnePlus7Pro using XDA Labs
rav101 said:
Hey buddy,
I was having a look at CRC check and what it does.
https://gitlab.com/HolyAngel/op7/commit/818f89d20f197ddf81aa2c8a40551b96173f2c2e
I've noticed your commit is in the mmc driver but given that we have UFS3.0 (not emmc 5.1) and that we don't have a micro SD slot, isn't this a worthless change because we will never be using mmc based storage?
Regards,
Ravi
Click to expand...
Click to collapse
Yeah most likely useless at the moment but the stock defconfig compiles the mmc driver anyways.
Hirs_E_Fruit said:
@HolyAngel I flashed the kernel with EXM and after reboot it shows me a message: "There is an internal problem in your device. Please contact your manufacturer."
Click to expand...
Click to collapse
Yes this is the message on boot listed in the op that will be fixed soon. Can safely ignore it.

[KERNEL][Q][AOSP/OneUI-2][R4][EOL] RAD Kernel [N950(F/N/FD)]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't provide support for OneUI-pie & treble ROMs, asking me if I will ever do is just a waste of time.
INFO:
If you wonder what the hell RAD Kernel is... Then let me explain, RAD Kernel is a project oriented towards people who depend on their phone every day.
RAD Kernel is designed for maximum stability.
All kernel builds are thoroughly tested before Release.
As the title says RAD Kernel per se supports AOSP ROM(s), OneUI 2 ROM(s) and it's meant to be used with it for a better STABLE experience.
RAD Kernel will NOT work with any other ROMS except AOSP & OneUI-2 (i.e no OneUI-pie & treble support).
SUPPORTED DEVICES:
G950(N/F/FD)
G955(N/F/FD)
N950(F/FD)
FEATURES:
Linux 4.4.111
Compiled with Clang 9.
O3 optimizations.
Fast, smooth and great for Daily Use!
Permissive SE-Linux.
Boeffla Wakelock Blocker.
Interactive governor as Default.
Optimized Integer SQRT. for upto 3x faster operation.
Tuned Interactive governor for better balance between performance and battery.
CPU BIG up to 2314MHz.
CPU small up to 1690MHz.
GPU OC up to 572MHz
WireGuard.
Disabled CRC by default - 30% File system performance.
Fsync toggle enabled by default, can be changed in a kernel tweaker.
TCP congestion - bic as default.
Z-RAM enabled by default and set at 2592MB.
Z-RAM compression - lzo
HMP values tuned for better performance!
and the list goes on!
ROOT:
RAD Kernel DOES NOT come with pre-installed ROOT.
You can flash the latest MAGISK to get ROOT!
SUPPORT:
Telegram Group - Click here!
Telegram Channel - Click Here!
CREDITS:
Me, for developing without time and for the struggle to test new things.
Stricted for LineageOS development.
Dr.DoubtReaper for testing my kernel images.
Samsung Open Source for their Kernel source.
Topjohnwu for magisk!
Linus torvalds for Linux!
Thanks to anyone else who made this whole thing possible, you are part of it as well!
and all the people on GitHub whom i might have cherry-picked from!
XDA:DevDB Information
RAD Kernel for Exynos8895, Kernel for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
Live0verfl0w
Source Code: https://github.com/Exynos-nigg/RAD-8895
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2021-01-07
Created 2020-10-05
Last Updated 2020-11-08
R4 (07/01/2021) [EOL]
BUGS:
DexOnPc is bugged, device wont be recognized (OneUI2 build only!)
DOWNLOADS:
Official Kernel Website - click here!
Google Drive - click here!
INSTALLATION:
NOTE! YOU NEED TO BE ALREADY ON AOSP/OneUI-2 ROM, BEFORE FLASHING THIS CUSTOM KERNEL
Download the provided zip for your device model.
Put the zip inside your storage.
Reboot to TWRP recovery.
Flash the zip and wait until it completes.
Reboot your device, and enjoy the Butter smooth experience.
CHANGELOGS:
R4(07/01/2021)
Added OneUI-2 support! (make sure to flash the OneUI-2 build)
Disabled logging and some debug stuff
Older changelogs below! =)
R3.5 HOTFIX(08/11/2020)
Unified installer zips!
Fix bootloop issues!
Switch from AK3 to AIK zips!
NOTE: This releases has no changes kernel side, but the installation zips have been changed!
NOTE: Sorry for the inconveniences caused because of the bootloops, this releases should (hopefully!) fix em =)
R3 (04/11/2020)
Disabled GFS (Gentle Fair Sleepers) for better UI performance!
Fix placebo tweaks blocker!
General optimizations!
Kill DVFS completely!
Remove excessive logging from decon, GPU drivers & touchscreen drivers!
Unified S8/S8+ kernel!
Set "westwood" as default TCP congestion algorithm!
NOTE: The kernel zips have different time labels on them because i did build them few days before but was just lazy to release them
R2 (13/10/2020)
Changed to Interactive on CPU!
Fixed sound not coming from earpiece!
Remove Audit dependency!
Enabled touch input booster!
Disabled Hotplug!
Change default IO scheduler to "deadline"!
Disable some logging!
This kernel build should be way smoother than R1!
R1 (05/10/2020)
Initial Release!
FAQ:​ (Read this before flashing the kernel and reporting bugs!)
Q. Gaming performace isnt good in this kernel!
A. Disable Samsung Hotplug from your preferred kernel tweaker app! Hotplug is disabled in builds from R2 onwards!
Q. Whats Fsync? should i disable it?
A. fsync transfers ("flushes") all modified in-core data of (i.e., modified buffer cache pages for) the file referred to by the file descriptor fd to the disk device (or other permanent storage device) so that all changed information can be retrieved even after the system crashed or was rebooted. This includes writing through or flushing a disk cache if present. The call blocks until the device reports that the transfer has completed. It also flushes metadata information associated with the file (see stat(2)).
Too scientific, didnt read! : In layman terms disabling Fsync gives you better performance with the risk of a Data loss/corruption during a system crash!
Q. I cant Flash NFS injector, FDE.AI, MAGNETAR and other tweakers on this kernel!
A. I have added a in-built kernel blocker to block installation of these so called "AIO kernel tweakers". You shouldnt install these tweaks in my opinion! If you still want to use a Tweaker, i prefer you use KTweak though i wont be providing support for issues if u have flashed any mods or anything of this likeliness!
Q. I have an issue and i have reported it in the XDA thread, yet nobody replied to me.
A. I might be slow in responding for issues reported in the XDA thread, if u want me to reply more faster, report it in the Telegram support group!
Q. My phone gets HOT while using this kernel!?
A. Short answer: It's your own issue, fix it yourself. Nobody makes a kernel just to burn your hands.
Long answer:
* Install Termux app from Play Store * Enable screen rotation, open Termux in landspace mode * Type this command: su -c top -d 2 * A list of processes will appear and refresh with 2s interval. Find which process consumes the most CPU usage with [%CPU] column and the package name in ARGS column. You should see the culprit of your issue.
Reminder: There is no such thing as "I have nothing in background but the phone still heats up". There definitely something happen and 99% of the time it's some of the rogue apps running in background.
Thanks to Diep Quynh for finding this one out!
I've tried it and for some reason left top corner of the screen never responded to touch. Ex: I couldn't turn on wifi from quick toggles n back arrow in some apps as I couldn't make a touch on left corner...
I didn't collect logs as I immediately reverted back to old kernel.
arjun.reddy said:
I've tried it and for some reason left top corner of the screen never responded to touch. Ex: I couldn't turn on wifi from quick toggles n back arrow in some apps as I couldn't make a touch on left corner...
I didn't collect logs as I immediately reverted back to old kernel.
Click to expand...
Click to collapse
Could you tell me which rom and device please?
Me or any of my testers didnt find this issue.
Live0verfl0w said:
Could you tell me which rom and device please?
Me or any of my testers didnt find this issue.
Click to expand...
Click to collapse
I am on Resurrection Remix Q Using NOTE 8 (SM-950F). I will flash the kernel again n let you know if it's replicable.
Finally new kernel for my note 8
I'll give it a try
and post feedback after testing for few days
I have small question
which is better... EAS or HMP?
Thanks
Alastal said:
Finally new kernel for my note 8
I'll give it a try
and post feedback after testing for few days
I have small question
which is better... EAS or HMP?
Thanks
Click to expand...
Click to collapse
As a dev i really cant compare, but u can try it and decide for urself:good:
I have this weird bug with the earpiece still not working on the new version of the Kernel
I am using the Official HavocOS rom on my Galaxy Note 8
Alessandro2003 said:
I have this weird bug with the earpiece still not working on the new version of the Kernel
I am using the Official HavocOS rom on my Galaxy Note 8
Click to expand...
Click to collapse
Its a ROM issue, which has been already identified by the rom dev, u can join their telegram group to know this
New kernel build is up guys! =)
Currently running the newest build, runs great, thanks for the work. 6h SOT and still 50% battery. Just wondering, any reason hotplug is disabled? Does it really impact performance that bad? Or is it just samsungs implementation? Tried to build a custom version using your source (with a big core oc and an undervolt), cant seem to for some reason. Once again, thanks for the great work. Any way to buy you a Coffee?
Hotfix build is uploaded, sorry for the inconveniences caused by the bootloop issues =)
Excudent said:
Currently running the newest build, runs great, thanks for the work. 6h SOT and still 50% battery. Just wondering, any reason hotplug is disabled? Does it really impact performance that bad? Or is it just samsungs implementation? Tried to build a custom version using your source (with a big core oc and an undervolt), cant seem to for some reason. Once again, thanks for the great work. Any way to buy you a Coffee?
Click to expand...
Click to collapse
Hi mate!
1. hotplug is disabled cuz in my tests i found em to degrade performance and doesnt make much of a difference battery life wise, hence disabled and yes its a samsung implementation.
2. For OC u can pick ace2nutzers a2n kernel commits, i have tested em and it works
3. as for the undervolt, i havent tried em and probably wont be =)
4. Thanks very much, i dont need coffee or beers and stuff, u can hit the thanks button =)
Thanks and regards,
Stay Safe!
I am using this kernel on android 10 oneui
after i flashed the kernel i had weird issue concerning samsung clear case
when i close the case the screen turn on and when i open the case the screen turns off!
it acts in the opposite manner!
N950N supported?
is there any way to change to enforcing?!
Excudent said:
Currently running the newest build, runs great, thanks for the work. 6h SOT and still 50% battery. Just wondering, any reason hotplug is disabled? Does it really impact performance that bad? Or is it just samsungs implementation? Tried to build a custom version using your source (with a big core oc and an undervolt), cant seem to for some reason. Once again, thanks for the great work. Any way to buy you a Coffee?
Click to expand...
Click to collapse
But how? Can you share your settings?

Categories

Resources