Hi all, been using OP phones for a while now, and since the 3, it has been really impossible to find a good glass screen protector worth the money, as we all well know.
I have then gave up on them and have decided to try a film type, since I take good care of my phones and really never drop them.
So I usually don't take the time to write about that, but really I feel like I should say good things about this one brand (first time using those "wet application" protectors, so the same may apply to other brands, I'm just happy with this one on first try).
First, they do free shipping anywhere in the world. The protector and small accessories come in a simple hard back enveloppe. I think that's good for us, as well as smart.
Second, and linked to the first point, they have a good customer support. My problem was that when entering my shipping address, I could not select Hong Kong as a "country". So I emailed them asking about this, and within a few hours, I had a nice reply and the customer rep had activated HK in the drop down.
Then the product itself.
It is not too hard to apply, really. Follow the steps and you'll be good. They recommand to wait 8-12 hours to turn on the phone again, but I need my phone as an alarm clock, so I waited like 2 hours and all is well. All in all, doing it in the evening, it took maybe 30 mins to install (with waiting to dry up a bit).
The film sticks well, even on the edges of the screen, and it is hard to tell it is there (well, under low angle light, you can notice a very slight "orange peel" effect). On the other hand, touch feeling is really as if there was nothing there.
I tested with the slim official OnePlus cases, as well as the official carbon bumper case, and no problem to notice at all. I also have a Spigen case, but I don't dare trying it, it looks like it "crawls" up a bit much on the edges of the screen. I expect that any slim cases, or those that are not too tight on the edges won't be a problem.
I also ordered one for my wife's S8+, and have installed it as well. Will post pictures this evening when she gets home and I can use her phone for pictures, so you can see how it looks. (for her, I took a full body coverage, and I'll post some pictures of that, so you can see how it goes, and how it looks on different phones).
So all in all, I liked the company attitude, the price (8 GBP for my screen only coverage for OP5, and 12 GBP for S8+), free delivery and of course the product itself.
Let me know if you have questions, I know I personnaly am always looking for info before trying those protectors. God knows I've wasted enough money on many useless ones :crying:
Edit :
have added pics so you can see how it looks (the slight orange peel effect), and also how it goes really fully to the edges
Woow it looks really good!
Gambo_7 said:
Woow it looks really good!
Click to expand...
Click to collapse
It does, yes.
I've been using that for a few days now and it's really hard to tell it's there.
Also something I noticed with usage is that it's very fingerprint resistant. Maybe better than the naked screen in that respect.
Can't really comment on long term durability but at least it's very good at the moment.
Having a discount of 25% today i took the risk and ordered it
Oh cool, hope it'll work for you as well as it does for me
I have a spigen case too, you sure you don't want to try it ahah?
is it like rhinoshield or is it like screen protector for scratching?
I say about this: https://www.ultimateshield.co.uk/co...cts/oneplus-5-invisible-film-screen-protector
Thank you!
lein199 said:
is it like rhinoshield or is it like screen protector for scratching?
I say about this: https://www.ultimateshield.co.uk/co...cts/oneplus-5-invisible-film-screen-protector
Thank you!
Click to expand...
Click to collapse
I'm talking about that one yeah, the soft one.
So it's against scratches only.
furious.builder said:
I have a spigen case too, you sure you don't want to try it ahah?
Click to expand...
Click to collapse
OK, just for you then.
aaaaaaand yeah, no problem. I guess be careful when putting in the case. But no lifting on the sides :good:
kipue said:
OK, just for you then.
aaaaaaand yeah, no problem. I guess be careful when putting in the case. But no lifting on the sides :good:
Click to expand...
Click to collapse
Nice! Thank you I'll see to buy this screen protector, nillkin's one is really too small, cutting the screen is annoying :crying:
Are we talking about the neo hybrid case? ;p
furious.builder said:
Nice! Thank you I'll see to buy this screen protector, nillkin's one is really too small, cutting the screen is annoying :crying:
Click to expand...
Click to collapse
It's very exact fit lol, so the protector must be very well aligned. But the protector is so thin that it just stays under the lips of the case.
NorthernLight_ said:
Are we talking about the neo hybrid case? ;p
Click to expand...
Click to collapse
Yep
I personnaly have the rugged armor
Can't say about that one!
I ordered it long time ago. Haven't tried it yet. I have nilkin glass now. Since I want to protect whole screen and I have a otterbox case... I will apply film soon. Fingers crossed
Ordered one today, got tired of every single tempered glass protector that has adhesive only on the sides and lets the dust go under the screen.. Let's hope this is as good as advertised!
Yeah, let us know if it works well for you guys too
Ordered! Waiting on shipment
Mine arrived, pretty simple package but it made its way to Hamburg Germany without problems :laugh:
Will apply it when in clean surrounding ;p
Related
Can you recommend a suitable screen shield for my Hermes? I need a kind of a crystal surface (like some Notebooks nowadays have).
Cheers
McTelling you...
this web site has PREMIUM SCREEN PROTECTOR 8125/8525:
http://www.seidioonline.com/
just ordered mine from shieldzone.com
galaxys said:
this web site has PREMIUM SCREEN PROTECTOR 8125/8525:
http://www.seidioonline.com/
Click to expand...
Click to collapse
Do you have bubbles under the protection? Do you see the protection or is your shield really invisible ?
For my first two devices I used Brando anti-glare protectors (shop.brando.com.hk) and was very happy. It was a couple of years ago though, so they may have changed since.
But whatever you do, don't buy Proporta!
Their protectors are too small for the screen of the TyTN, and when (on their recommendation) you return the protector they will not send you a replacement. And when you tell them how unhappy you are with the situation they just stop answering your emails.
McTell said:
Do you have bubbles under the protection? Do you see the protection or is your shield really invisible ?
Click to expand...
Click to collapse
If applied properly & very carefully, then there are no bubbles. I have none, and it's transparent.
I use exim screen protector. I can definitely recommend it to anyone.
i agree with tiatrop,
i use the exim SPUC screen protectors on all my devices.
you can peel them off and reapply them,
the instruction says you can even wash them, but i've yet to try it.
and any bubbles when putting them on, can easily be pushed out.
I agree with bamse, I've been using Brando for years, I did try another brand on my C500 a couple of years back, they didn't come up to scratch. I'm using on my herm, no probs no bubble (you need to spend a little time carefully applying).
Boxwave has some good screen protectors. I'm using their crystal clear on my 8525 now and had the anti-glare on my HP iPAQ.
quangdx said:
i agree with tiatrop,
i use the exim SPUC screen protectors on all my devices.
you can peel them off and reapply them,
the instruction says you can even wash them, but i've yet to try it.
and any bubbles when putting them on, can easily be pushed out.
Click to expand...
Click to collapse
I washed mine once. It fell on the carpet so you can imagine the things that got stuck there! Damaged the corner a little bit but it was completely reapplyable, and I managed to get all the dust out with scotch-tape. Hence my recommendation.
Wow, thank you all for you recommendations. I definitely check them out.
But is there a way to apply a SP, without having bubbles? What you mean exactly with "carefuly"?
Do you use credit cards for that? I red that credit cards for appling are an evil thing.
I guess it's tall order to say make a youtube tutorial, haha...
cheers
PS. Do you have experience with http://www.pocketpctechs.com/ Shields?
And is the following table bull****?
http://www.pocketpctechs.com/assets/pics/ws_grid.gif
just realized shieldzone has a full body shield for the 8525! why its not in their pda list lives me confused.
cant wait, cant think, cant sleep.. took the plunge and ordered the FULL BODY SHIELD for 8525.. nobody here better not tell the wifey... or risk getting shot by my laser gun..
fullbodyshield
bapski said:
cant wait, cant think, cant sleep.. took the plunge and ordered the FULL BODY SHIELD for 8525.. nobody here better not tell the wifey... or risk getting shot by my laser gun..
Click to expand...
Click to collapse
I actually had this on my previous 8525 that I had to send back for warranty replacement. It is a booger to put on..took me a good half hour to do it right. The cutout pcs are not all exactly perfect but fit good enough. I really like it. It held up very well, gave the phone a slick glossy finish and made for good traction when I would set my phone down on my center console in my truck.(previously if I tried that it would slide(actually fly) off the vinyl covered console if I hit the brakes too hard or turned a corner too fast... with the Shield on there it never slipped. I am going to order another one now for this warranty replacement as well..just been waiting to make sure this device didnt fail before installing another shield!
galaxys said:
this web site has PREMIUM SCREEN PROTECTOR 8125/8525:
http://www.seidioonline.com/
Click to expand...
Click to collapse
Does it come with one of those scraping tools to keep air bubbles out?
ericc191 said:
Does it come with one of those scraping tools to keep air bubbles out?
Click to expand...
Click to collapse
wouldnt a credit card or anything similar work?
I've been using screen protectors for some time now on my previous and current PDA's and phones; HP has a nice system of protectors that have grids on the removable side to assist in visually getting the best fit. Would never use my 8525 without one... and yes, anything like an old credit card, cut to the right size, will work to get air bubbles out.
But thanks to this thread, I've now ordered the Bodyshield; if it's all it's claims to be, AND with a lifetime guarantee, it should be worth the $24.95.
Oleschuldad
talking about shieldzone...
i ordered mine with free shipping more than a week ago and im yet to see what i bought.. does it really take that long?
ericc191 said:
Does it come with one of those scraping tools to keep air bubbles out?
Click to expand...
Click to collapse
It does not come with tools, but the instructions recommend a credit card. Note that this is re-applyable if U have bubbles on the 1st try.
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
I don't bite
Alik4041 said:
I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened.
Click to expand...
Click to collapse
It was 2000 the first time I experienced that. It was a palm m500 and a little piece of dust got on the tip of my stylus. I didn't hear it so much as I felt the friction, but my reaction was much the same. I haven't gone without a screen protector since.
As to the included screen protector, use it if it works for you, but you'll typically find better durability in popular protectors like the boxwaves you linked to or clarivues. The clarivue that I put on my Palm TX in 2005 is still on it, and still looks good.
The thing I worry about with a lot of those no name brand cases on ebay is how well do they really fit? The last thing you want is to have them falling off. I don't know if my fear is well-founded or not, but I didn't really want to gamble on it. But as far as TMo goes, I'm not sure what to tell you. Boxwave actually has a pretty cool soft case called the praetorian crystal slip, but not for the TMo version. Seidio seems like a nice quality joint, but they don't seem to make their innocase for the TMo version either.
Edit: I suppose you could check this thread out.
I had the acrylic case with screen protector and I removed it shortly after purchasing. The porblem I had is that the screen protector is superficial and although it works sometimes when I typed certain virtual keys another part of the screen protector would also bend down on my press and caused for a different near by character to be pressed. Eventually I got rid of it and just purchased a seperate screen protector.
I really am looking for quality though for a case, just want something that's not too big or will not hinder usage of the phone. I've heard a lot about the ghost armoring and all. I'm considering it, but that will not save a phone from a fall or anything like that.
Consider an all-body protector (such as zagg or bodyguardz), combined with a pouch or holster case that you remove the device from to use it.
This is my preferred method, so my TP2 is well protected when it's not in use, and I'm completely unhindered when I am using it (but still with scratch protection).
Note that the protectors need to be applied very slowly and carefully to make sure they're lined up well and properly stuck down around the edges.
Alik4041 said:
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
Click to expand...
Click to collapse
I have the same clear hard plastic case and absolutely love it. I've tried the body glove case, and had some issues with sliding the keyboard in and out. I just use the screen protector that came with the phone, and the clear hard plastic case. No problems at all, though I still have to take the case off every once in a while to clean it, but you'd have to do that with any case really. Get a lot of compliments on it.
dougstoner said:
I have the same clear hard plastic case and absolutely love it...
Click to expand...
Click to collapse
Does it add much bulk...???
da9th_one said:
Does it add much bulk...???
Click to expand...
Click to collapse
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
dougstoner said:
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
Click to expand...
Click to collapse
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
I just ordered some phantom skinz, I'll report back when they get here.
liht said:
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
Click to expand...
Click to collapse
I think it fits better than the body glove case. Plus, it looks way better. I've had mine for a while now with no problems. Even take it off a bit to clean it up, and no issues. Check my old thread out...Have pics on post #5.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case
Hello all. I have been waiting for SGP to make the crystal screen protector for the prime. While browsing for accessories I came across this promising prospect. This screen protector is not made by SGP but it way be worth your consideration. This brand is advertised as Armor Suit. I am going to order mines now and will provide and update on its use.
Jason
http://www.amazon.com/gp/product/B006TOPR72/ref=ox_ya_os_product
Instruction Video >>> http://www.youtube.com/watch?v=GFHy6o_VRwI
Link to activate lifetime warranty >>> http://www.armorsuit.com/warranty/
Update 2-11-2012
I received mine yesterday at work. As soon as I got home I opened the package and applied the new screen protector. The instructions recommend keeping the tablet off for about 24 hours after application before use. I did miss one part of the instructions which says to wet both sides of the screen protector. Make sure you do this because it will help you remove the liquid and bubble better with the rubber card. It has been over 12 hours since the application and it is curing nicely. I still have about 10 tiny wet bubbles that I am hoping will dry out before I say that it is perfect. One thing I did notice when I removed by prime from its folio case is that I had a tiny scratch a quarter of an inch up above the Asus logo. I was very upset about that because I handle my tablet like a baby, unless somehow the scratch was caused my the inside material of the case. Anyways, the good thing about this screen protector is that now you can no longer see the scratch. If this continues to cure like I hope it does, I will order another one for my girlfriends prime. Did I mention that wifi and GPS performance also improved after the application ??? Lol jk. The screen did lose a little of its smooth glide when swiping with your finger but that should improve over time. Touch response has been the same otherwise. I will provide an update in a couple of days once it has cured some more. If any of you reading this have purchased and installed the product, please provided your experience. I would like to know if the quality is consistent.
***Important***
Just an FYI to those who use the keyboard dock and are considering installing this screen applicator, removing the prime in and out of the keyboard dock is extremely tight and is marking up the screen protector film where the dock and screen meet. I am going to contact the manufacturer about this to see if they are aware of this issue...
jfranco328 said:
Hello all. I have been waiting for SGP to make the crystal screen protector for the prime. While browsing for accessories I came across this promising prospect. This screen protector is not made by SGP but it way be worth your consideration. This brand is advertised as Armor Suit. I am going to order mines now and will provide and update on its use.
Jason
http://www.amazon.com/gp/product/B006TOPR72/ref=ox_ya_os_product
Click to expand...
Click to collapse
looking forward to your update! only problem i have with their listing on amazon is that i says its non sticky, but also says its self healing... i sell screen protectors in a sprint store. from my experience, the self healing ones tend to be the orange peels and rubbery (sticky) kind. but if im wrong, please let me know! interested in this!
stretchwookie said:
looking forward to your update! only problem i have with their listing on amazon is that i says its non sticky, but also says its self healing... i sell screen protectors in a sprint store. from my experience, the self healing ones tend to be the orange peels and rubbery (sticky) kind. but if im wrong, please let me know! interested in this!
Click to expand...
Click to collapse
Will do, I received my order confirmation last night. Standard shipping so maybe sometime next week I will have it.
Lifetime warranty means you'll ruin 5 of them just trying to install them! This is why right now I'm not wearing a condom on my Prime. If I can't get the perfect screen protector on there perfectly then I just won't do it at all. I'm fairly careful with the front and I may eat my words one day.
Mine should be here today thanks to prime shipping I will give my feedback on this protector later this afternoon
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
msfguard said:
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
Click to expand...
Click to collapse
Sending a thanks your way for your update. Later this afternoon I still had a couple of bubbles that I was to impatient on waiting to see if they would dry out and disappear so I decided to apply some of the solution on top of the surface and opted to use a credit card to push out the remaining bubbles (I did not like using the included rubber applicator much.) One Important item that I did not realize until now is that getting the tablet to dock with this screen protector is really, really tight. This may be a deal breaker for some. I don't use the keyboard dock all the time but it looks like the constant swap will make the screen protector look a little beat up at the bottom...
msfguard said:
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
Click to expand...
Click to collapse
If it's clear and not matt, hows the anti fingerprint part of it working out?
Sent from my CM7 Atrix 4G
It seems to resist printing fairly well, I'd say it really only has showed them with hard swipes of the finger such as maybe playing fruit ninja for abit but just normal presses it rarely leaves one
jfranco328 said:
Hello all. I have been waiting for SGP to make the crystal screen protector for the prime. While browsing for accessories I came across this promising prospect. This screen protector is not made by SGP but it way be worth your consideration. This brand is advertised as Armor Suit. I am going to order mines now and will provide and update on its use.
Jason
http://www.amazon.com/gp/product/B006TOPR72/ref=ox_ya_os_product
Instruction Video >>> http://www.youtube.com/watch?v=GFHy6o_VRwI
Link to activate lifetime warranty >>> http://www.armorsuit.com/warranty/
Update 2-11-2012
I received mine yesterday at work. As soon as I got home I opened the package and applied the new screen protector. The instructions recommend keeping the tablet off for about 24 hours after application before use. I did miss one part of the instructions which says to wet both sides of the screen protector. Make sure you do this because it will help you remove the liquid and bubble better with the rubber card. It has been over 12 hours since the application and it is curing nicely. I still have about 10 tiny wet bubbles that I am hoping will dry out before I say that it is perfect. One thing I did notice when I removed by prime from its folio case is that I had a tiny scratch a quarter of an inch up above the Asus logo. I was very upset about that because I handle my tablet like a baby, unless somehow the scratch was caused my the inside material of the case. Anyways, the good thing about this screen protector is that now you can no longer see the scratch. If this continues to cure like I hope it does, I will order another one for my girlfriends prime. Did I mention that wifi and GPS performance also improved after the application ??? Lol jk. The screen did lose a little of its smooth glide when swiping with your finger but that should improve over time. Touch response has been the same otherwise. I will provide an update in a couple of days once it has cured some more. If any of you reading this have purchased and installed the product, please provided your experience. I would like to know if the quality is consistent.
***Important***
Just an FYI to those who use the keyboard dock and are considering installing this screen applicator, removing the prime in and out of the keyboard dock is extremely tight and is marking up the screen protector film where the dock and screen meet. I am going to contact the manufacturer about this to see if they are aware of this issue...
Click to expand...
Click to collapse
msfguard said:
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
Click to expand...
Click to collapse
both of you get thanks, but im going to skip this buy. we do wet installs at my sprint store, and 2 of the guys there have killed devices this way. i havent, but i dont want my first time to be MY prime, please dont mind my dumb rhyme
stretchwookie said:
both of you get thanks, but im going to skip this buy. we do wet installs at my sprint store, and 2 of the guys there have killed devices this way. i havent, but i dont want my first time to be MY prime, please dont mind my dumb rhyme
Click to expand...
Click to collapse
That's understandable. This is my first time using a wet screen protector. I wasn't concerned about damaging the prime because I have the accidental protection plan.
Do you have to pay for the replacements? I know most of these "lifetime replacement" types you have to pay $5-$10 just to get them to mail you a new one.
Bogus.
jfranco328 said:
That's understandable. This is my first time using a wet screen protector. I wasn't concerned about damaging the prime because I have the accidental protection plan.
Click to expand...
Click to collapse
aww thanks dood! i totally forgot about the protection plan! did you go through squaretrade?
back on topic: went with an Acase matte anti glare, dry install. took literally over an hour to get it perfect, but i did it. wish it woulda been easier, but im just too shy of the wet installs...
I'm looking for a top quailty anti-glare screen protector. I mainly want the anti-fingerprint part of it, but I like the matte screen look too. I had a Acase one on there, but the anti-fingerprint wasn't that great. I really wish Realook would come out with one for the Prime, b/c their's are awesome (have it on my phone). Realook (http://www.realook.us/dales_html/) has almost a textured feel to it, which is beyond awesome for keeping finger prints off. I have a email into them now to see if they plan on making one for the Prime.
I'm also thinking about NuSheild too:
http://www.nushield.com/dayvue_technology.php
Opinions, other options???
pileot said:
Do you have to pay for the replacements? I know most of these "lifetime replacement" types you have to pay $5-$10 just to get them to mail you a new one.
Bogus.
Click to expand...
Click to collapse
I don't think you need to pay for a replacement. I should have an answer to that question in the next couple of days if they respond to an email I sent to them early today...
Swiftks said:
I'm looking for a top quailty anti-glare screen protector. I mainly want the anti-fingerprint part of it, but I like the matte screen look too. I had a Acase one on there, but the anti-fingerprint wasn't that great. I really wish Realook would come out with one for the Prime, b/c their's are awesome (have it on my phone). Realook (http://www.realook.us/dales_html/) has almost a textured feel to it, which is beyond awesome for keeping finger prints off. I have a email into them now to see if they plan on making one for the Prime.
I'm also thinking about NuSheild too:
http://www.nushield.com/dayvue_technology.php
Opinions, other options???
Click to expand...
Click to collapse
I can tell you the armor suit does very well reducing finger prints. Your fingers glide smoothly across the screen. Now this is something I am going to try my best to describe, when typing ( I use thumb keyboard) you sort of get what feels like a slight rubber bounce with each press, I actually like that. Obviously its going to feel different then just typing on the glass but for me it works.
Its on the general "screen protectors" thread, but these are so great they need to be announced in their own
no, its not just for announcing their availability (EVEN THOUGH IT IS http://www.spigen.com/cell-phone/ht...-screen-protector-steinheil-ultra-series.html -- hell yeah!!), its for discussion too. I'd be happy to post pics of the shield upon arrival
These are easily the best screen protector out there in terms of strength, durability, texture, and light transmittence. I know there are legions of us that were holding out for these to finally go on sale.
now, to get ultra crystal or ultra fine?
EDIT: i ordered ultra crystal and it came out to ~$17. btw, im not sure if buying through amazon does the same, but ordering from the sgp website has always landed me with TWO protectors *hint hint*
I take it the ultra crystal is the clearest, whereas ultra fine reduces fingerprint smudges more? How noticeable is it with either that you have a screen protector on?
ultra crystal - completely invisible except at the edges were the protector obviously ends its surface is extremely glass-like
ultra fine - like any anti-glare/anti-fingerprint it has that matte-like texture/appearance so it'll be noticeable (i've only ordered ultra crystal)
neeevermind
Thanks. Not sure if I actually need a screen protector or not, but I decide to get one, it sounds like the ultra crystal is the one I'll pick. Are these dry or wet application?
suprmallet said:
Thanks. Not sure if I actually need a screen protector or not, but I decide to get one, it sounds like the ultra crystal is the one I'll pick. Are these dry or wet application?
Click to expand...
Click to collapse
I was wondering that too. Looked it up on youtube (also to see the quality) and they're dry application.
too many optionsssssssss
wonder if this will affect the proximity sensor ... looks like the protector covers everything
Freelancerx said:
wonder if this will affect the proximity sensor ... looks like the protector covers everything
Click to expand...
Click to collapse
I was just wondering the same thing...
yup I knew I should have said somewhere that they're dry installs.. ever since I tried skinomi in my E4GT and got water damage from the stupid wet install I'm strictly going dry from now on, even if it was just a fluke that one time.
Steinheil is usually top quality with their protectors so I'm sure the sensor will me accommodated for, I'll certainly report back when I get it.
As for NEEDing it, it's totally debatable. I've gone a couple weeks without and not a problem. It just gives peace of mind and since the ultra crystal is almost nonexistent its pretty much a win-win
NOTE: the picture on the Site is not accurate to what you'll get (looked at the advertised picture of the E4GT and it looked like there were no cutouts but there are when u get it)
Will definitely check back on your experience with these. I have ultra clear version on my OG evo and have been pleased with the results. I'm considering going without, but if these are good, I may just have to get them for the peace of mind.
Ordered mine. You can also buy via Amazon (sold by SGP).
The crystal ones are perfect. You can't tell that you have a screen protector. They last the longest, are the most scratch resistant and you don't have to put water near your phone.
I've been waiting (carefully) until these came out. Now I can feel better about not getting a random scratch on my screen.
I was going to go without a screen protector, but I may give these a try. So many people seem to speak highly of them.
May wait for someone to confirm that the proximity sensor works properly with one of these installed.
funcrusher said:
I was going to go without a screen protector, but I may give these a try. So many people seem to speak highly of them.
May wait for someone to confirm that the proximity sensor works properly with one of these installed.
Click to expand...
Click to collapse
If installed correctly, you won't even notice a difference (using the Crystal). Plus you can feel safe about accidently putting your phone in the pocket with your keys, etc.
The only pain with installing is making sure you start to lay it down correctly. Unlike the water methods, you can't really shift it after you lay it down. The protector is a tight fight so your hands have to be on their 'A' Games. If you miss slightly, you have to pick up and retry, which could lead to random dust floating in.
Luckily, they usually give you two. So if you screw up royally with one, you get a second chance.
I've used dry protectors ever since I seen how absolutely terrible the zagg ones are. I did order an xo skin which makes me sad after seeing this. I'll wait for a review/pix and prolly order one anyway
Sent from my EVO using xda premium
purock said:
If installed correctly, you won't even notice a difference (using the Crystal). Plus you can feel safe about accidently putting your phone in the pocket with your keys, etc.
The only pain with installing is making sure you start to lay it down correctly. Unlike the water methods, you can't really shift it after you lay it down. The protector is a tight fight so your hands have to be on their 'A' Games. If you miss slightly, you have to pick up and retry, which could lead to random dust floating in.
Luckily, they usually give you two. So if you screw up royally with one, you get a second chance.
Click to expand...
Click to collapse
I'm getting anxiety just thinking about installing it. I HATE installing screen protectors.
I think you get two in one pack, correct?
Rippley05 said:
I've used dry protectors ever since I seen how absolutely terrible the zagg ones are. I did order an xo skin which makes me sad after seeing this. I'll wait for a review/pix and prolly order one anyway
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I ordered an XO skin for insurance. But when it came in the mail and I saw that it was a wet/soap deal, I said 'oh hell no'. I prefer the dry installation. Just have to be careful with dust.
funcrusher said:
I'm getting anxiety just thinking about installing it. I HATE installing screen protectors.
I think you get two in one pack, correct?
Click to expand...
Click to collapse
Yep it comes with two. Only once did I have to abandon the first try and move on to the second one. I don't like installing them either, but I feel much better after I do. I feel much better installing a dry one like this (at least you can't really screw up the phone).
Looks like mine has shipped already. I'll let you know how they fit, apply, interaction w/ proximity sensor, etc.
Ran across a link to this somewhere.......haven't tried it yet myself, but it looks like it would keep it in the right place. Have to try it when I get my phone.....hopefully sometime soon.
http://www.youtube.com/watch?v=_oJX99p3kEc
Thanks for the info. Ordered for my dad.
I've bought sgp ultra crystal on my galaxy s2. It's super clear and it's STILL on my device. I only see ultra crystal & fine for EVO 4G LTE. Hopefully they release oleophobic one, as well.
twoashj said:
Thanks for the info. Ordered for my dad.
I've bought sgp ultra crystal on my galaxy s2. It's super clear and it's STILL on my device. I only see ultra crystal & fine for EVO 4G LTE. Hopefully they release oleophobic one, as well.
Click to expand...
Click to collapse
yup its still on my S2 as well and I envy it bc I actually like it BETTER than the glass. sometimes the glass can be hard to navigate bc it doesn't have enough oil on it, but that's never a problem with the ultra crystal on it. like someone said earlier, ultra crystal is perfect.
I'll make an installation video when mine comes in which will probably be Friday or Saturday, I'm no professional though so don't expect too much. the method that they demo in their install videos on their Site works very well. It also comes with stickers to help lift the protector and take out dust specks if any get trapped under the film. you just need to find a clean, dust free environment to install it - like a murky bathroom after a hot shower
I used to use these on my old 1+1 as they often have them on offer which makes them one of the cheapest and decent protectors.
Had a 90% off code (Take90) through today so thought I'd have a look if they have anything for the 1+5.
They only have a plastic film protector for the 1+5 showing in their site.
http://www.xtremeguard.com/OnePlus-5-Screen-Protectors-p/oneplus_5_screen_protector.htm#.WapXoiPTVnE
However when selecting that a Spartan glass option comes up at 29.99 (buy 2 with the code to work comes in at $6) the pair, which again is incredibly cheap.
I haven't ordered one yet to see if it's real or just a website error (shipping to the UK takes weeks and costs more than the protectors).
Wondering if anyone else has tried it stateside?
I may order them anyway, I seem to be amassing a collection of bits of sticky edged glass, so another one won't hurt.
I've ordered one. For a tenner I'll risk it. These used to be really good. Had one for my one plus one.
Raharazod said:
I've ordered one. For a tenner I'll risk it. These used to be really good. Had one for my one plus one.
Click to expand...
Click to collapse
Yeah I went for it as well.
Will see when they turn up.
If no good, it'll go with my collection..
fards said:
Yeah I went for it as well.
Will see when they turn up.
If no good, it'll go with my collection..
Click to expand...
Click to collapse
Taken the plunge too, will see how they fit, still looking for that perfect glass, thinking I will end up with just a decent TGSP and use my Fitbag for protection in pockets.
https://www.amazon.co.uk/fitBAG-tailored-integrated-microfibre-cleaning-Beat-Black/dp/B071G8FXRH/
Looks like mine will be here in the next two days according to the tracking.
I'll update the thread with pictures when it does.
I just ordered and the discount code still worked. less than 7 bucks for two.
fards said:
Looks like mine will be here in the next two days according to the tracking.
I'll update the thread with pictures when it does.
Click to expand...
Click to collapse
I've got a couple of these on order, although right now I'm fairly happy with my Nilkin/Otterbox combo gave up on the full 3.5D coverage ones, first one arrived broken, second one had debris already on the adhesive before lifting from the plastic.
Well mine has turned up today.
Compete utter sh#te..
It's about 3mm narrower than the screen (not the bezels the actual visible screen)
There's no borders but there's obviously the original screen exposed on the sides
I'm going to demand a refund.
Sorry if anyone else ordered one based on this thread. Very disappointed
Might be able to see the edge and how much is exposed on the right here.
Not the best quality photo, taken with my shield tablet..
fards said:
Might be able to see the edge and how much is exposed on the right here.
Not the best quality photo, taken with my shield tablet..
Click to expand...
Click to collapse
Look like a similar cover to the Nilkin tbh. I'm happy with that as a solution, compared to the dark borders. The Otterbox case I use offers enough protection to the very outer edges due to the depth and my most likely damage would come from a more central hit/scratch.
I've received mine today and the result is similar I'm afraid.
I'll leave it on for a day or two but I reckon it'll come off since it doesn't cover the screen properly.
I really don't understand why it's this hard to make a screen protector that fits properly. Maybe OnePlus just gave the wrong measurements to all the OEMs?
In any case...
Pixel 2 out soon. Maybe that'll be an option.
fards said:
Well mine has turned up today.
Compete utter sh#te..
It's about 3mm narrower than the screen (not the bezels the actual visible screen)
There's no borders but there's obviously the original screen exposed on the sides
I'm going to demand a refund.
Sorry if anyone else ordered one based on this thread. Very disappointed
Click to expand...
Click to collapse
XtremeGuard always sells complete and utter sh*t. Any company that has 90% sales once a month is lying to its customers and does not deserve my business.
fards said:
Well mine has turned up today.
Compete utter sh#te..
It's about 3mm narrower than the screen (not the bezels the actual visible screen)
There's no borders but there's obviously the original screen exposed on the sides
I'm going to demand a refund.
Sorry if anyone else ordered one based on this thread. Very disappointed
Click to expand...
Click to collapse
Put mine on today after receiving yesterday.
Worst protector ever! Huge halo and cuts off a portion of screen like the million. Do not buy! I've already asked for refund.
Sent from my SAMSUNG-SM-G891A using Tapatalk
So I wanted to get one but I don't have a credit card and shipping is 8 dollars!
You have to buy two products in order to get the code "Take90" to work
Same as Nilkin with an extra cutout for the ffc and proximity sensor. It's probably one of the best tgsp right now, full coverage units are currently all worse than this.