Hey all,
I am looking for a working unbrick,img for a hard bricked G900v that currently doesnt go into recovery mode or download mode. Windows recognizes the device only as Qualcomm HS-USB QDLoader 9008.
I honestly dont remember what version BL or FM i flashed it with last and I have been searching for days online and through xda-dev for versions of unbrick images to mount onto my sd card to enable it to get to download mode so I can try and revive this device.
I have tried PD1, NCG, among the ones i remember, none of which have worked.
Can someone help?
Related
my lg zone 2 is bricked by installing twrp.. no power, no recovery, no download mode.. i finally got computer to see phone as qualcomm hs-usb QDLoader 9008 (com4). i also got software QFIL to see phone in Download Mode but cant seem to to get it to repair and ESF Professional Qualcomm NV Tools to see phone in Online Mode but can not repair im not fimilar with these two software's so that might be a reason.. With QFIL i have problem with Programmer Hex saraha but does see phone in Download Mode. With QualComm NV Tools it detects phone in OnLine Mode and Mobile Model ID as "FFA/SURF 7630 (NAND)" and SPC is rejected by phone.. i can change phone modes with Qualcomm NV tools if that can help.. LGFlashTool and BoardDiag 3.99 does not see phone.. can someone please help me its going on a month bricked and phone still has service.. i did root phone with kingroot before installing twrp which bricked my phone. Also phone does disconnect and reconnect to pc every so often..
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
il183690 said:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
Click to expand...
Click to collapse
This works for people who are able to get to fastboot. I am not able to get to fastboot at all. Only EDL. Please help. Any other alternative?
Can you please check this thread.
I hope this helps.
You remind me of myself
I did the same thing in April and had to go to service center as i couldnt make it work that time, they fixed it within 24hours
But now there are lots of recovery methods that u could try
Zed4u said:
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
Click to expand...
Click to collapse
Try deep flash methode, just need to buy deep flash cable in market. For the guidance, please try to googling it in miui forum due to already available there.
Yesterday, one of my friend succesfull to restore her kenzo from diagnostic mode and really happy with the result.
Try the simple deep flash method mentioned here -
http://en.miui.com/thread-310325-1-1.html
I was able to recover my rn3 from 900e mode using this.
It's very simple and easy. You just need a copper wire strand to do it.
Use Deep Flash Method
I had the exact same problem so I tried deep flash method. It worked and my phone was detected by the PC as 9008. Then I could flash the fastboot rom using Miflash tool. Hope this helps.
i've deleted the system partiton when i try to flash cm14 in safestrap twrp.
so i downloaded the stock rom, rename it from *.bin to *.zip in order to install it in the twrp.
and i installed the newest twrp in fastboot mode after unlock sucessfully.
Finally, the black out happened. no pic in any time, only find qualcomm hs-usb qdloader 9008(COM4) when connect to PC make me know it still alive.
As far as I know qualcomm hs-usb qdloader 9008 means Emegercy Download Mode. the I tried some tools such as QFIL and Miflash, but nothing good happen.
It didn't work either when I found the link below
https://forum.xda-developers.com/ki...x-firmware-t3277197/post73262893#post73262893
so who can help my pad back?
thanks for your patience.
Dear, My phone has been dead it's don't boot into download or recovery mode when I connect it to the
laptop it's shown as Qualcomm HS-USB QDLoader 9008, I have been tired to search for resolve this problem
I need full support please, like make sd card boot, and the file that I need it to repair emmc also explain how to do all things
because I have no idea to how to do it, thanks in advance for all :laugh::laugh:
I've got an old VirginMobile LG Optimus Elite (LGVM696) phone that won't boot, and I'm wondering if any data recovery is possible. The device itself isn't important, but I want to find out if I can recover photos.
When I plug the phone into a Windows PC, it shows up in the device manager as Qualcomm HS-USB QDLoader 9008 (COM3). ADB or fastboot don't recognize the device, on Windows or Ubuntu (not sure if I got everything installed correctly on Ubuntu, though).
If it's recognized as this QDLoader 9008, does that just mean it's toast, or is there some way to load a recovery image or something? Would that erase the internal storage?
I've found a lot of threads on here about this, but I don't know enough about Android to really figure it out. Not sure what everything means, like the difference between recovery and a custom recovery, download mode, fastboot, etc. I don't think I've found much for this particular phone, either.
I'm also seeing a lot of mentions of .dll, .tot, .kdz files. What are all those in regards to Android or LG specifically? I've found a .cab file that is supposedly the stock firmware for this phone.