DISCONTINUED
My last RR Nougat ROM --> RR-N-v5.8.5-20181108
It's time for ResurrectionRemix ..
RR-N-v5.8.5-20181108-gtaxlwifi-Unofficial.zip
RR-N-v5.8.5-20181108-gtaxllte-Unofficial.zip
Known issues:
- GPS satellites do not lock on LTE version (SM-T585 only)
- Pls use latest Magisk version (v17.x) - on earlier versions you may get bootloop.
Changes:
RR-N-v5.8.5-20181108
- Google security updates -> November 2018
- New kernel -> based on T580XXU3BRF1 sources
RR-N-v5.8.5-20181030
- Google security updates -> October 2018
- Latest kernel security updates -> thanks to @cschsz
RR-N-v5.8.5-20180917
- Google security updates -> September 2018
- Added liboemcrypto (DRM L1 still not fully working)
RR-N-v5.8.5-20180817
- Google security updates -> August 2018
- Improve auto backlight brightness -> thanks to @hammer-is
- Enabled NightDisplay
RR-N-v5.8.5-20180724
- Google security updates -> July 2018
- Latest kernel security updates -> thanks to @cschsz
- minor change for mobicore
RR-N-v5.8.5-20180618
- Removed AdvancedDisplay
- Latest kernel security updates -> thanks to @cschsz
RR-N-v5.8.5-20180612
- Google security updates -> June 2018
- Again a few more kernel security updates -> thanks to @cschsz
RR-N-v5.8.5-20180520
- Google security updates -> May 2018
RR-N-v5.8.5-20180426
- Added OTA config for gtaxlwifi / gtaxllte
- A few more kernel security updates -> thanks to @cschsz
RR-N-v5.8.5-20180413
- Google security updates -> April 2018
- Plenty of kernel security updates -> thanks to @cschsz
RR-N-v5.8.5-20180315
- Google March 2018 security updates
- Minor changes for external SDCard (Magisk seems to block adoptable storage)
- Overlays: added GPS XTRA_SERVER
RR-N-v5.8.5-20180210
- Google February 2018 security updates
- Changed DRM service groups -> to fix DRM service start
- Kernel: removed "forced" permissive selinux mode -> you can change to enforcing mode via "setenforce 1" now.
RR-N-v5.8.5-20180121
- Google January 2018 security updates
- Enabled FFmpeg codecs
RR-N-v5.8.5-20171216
- Added stock fingerprint to fix Magisk Safety Net check
- Allign GPS config with stock config -> for LTE (585) version only
RR-N-v5.8.5-20171211
- security patches -> December 2017
- minor kernel changes
- minor changes for CMParts
- added POWER key in config
RR-N-v5.8.5-20171204
- Fix GPS for SM-T580
RR-N-v5.8.5-20171203
- Latest changes from @Valera1978
RR-N-v5.8.5-20171201
- Added overlay for open/wake and sleep/close lid
RR-N-v5.8.5-20171130
- initial release
Installation:
1. Boot into TWRP
2. Wipe system, cache and dalvik and data
3. Install ROM.zip
4. install opengapps (7.1 - arm)
5. install Magisk.zip
6. Reboot into system
Upgrade:
1. Boot into TWRP
2. Install ROM.zip
3. Wipe cache and dalvik
4. Reboot into system
- Please install Magisk.zip yourself.
- If you face any strange issues, pls do a factory reset via TWRP first.
DOWNLOAD:
https://androidfilehost.com/?w=files&flid=289290
https://androidfilehost.com/?w=files&flid=289292
https://drive.google.com/drive/folders/1uZ4DZ1wN8dpY-AnJhCirr6RsL02PVMrE
TWRP:
Based on OMNI sources ..
https://forum.xda-developers.com/showpost.php?p=76564831&postcount=213
https://forum.xda-developers.com/showpost.php?p=75483069&postcount=237
https://forum.xda-developers.com/showpost.php?p=77000830&postcount=401
https://forum.xda-developers.com/showpost.php?p=77340691&postcount=433
twrp-3.2.3-4-gtaxlwifi-OMNI6 / twrp-3.2.3-4-gtaxllte-OMNI6
https://forum.xda-developers.com/showpost.php?p=78148216&postcount=169
https://forum.xda-developers.com/showpost.php?p=78148267&postcount=170
SOURCES:
https://github.com/followmsi/manifests/tree/gtaxlwifi-rros-cm-14.1
https://github.com/ResurrectionRemix
Big thanks to @Valera1978 for all his work !
Enjoy ..
Nice one. Thx. Using RR Releases on my s5 mini and im quiet happy. Good to see it on the A..
One question... will FlipFlap work? With the LineageOS the magnetic Sensor was dead.
Sascha_77 said:
Nice one. Thx. Using RR Releases on my s5 mini and im quiet happy. Good to see it on the A..
One question... will FlipFlap work? With the LineageOS the magnetic Sensor was dead.
Click to expand...
Click to collapse
For me it didn't work.
Shadowghoster said:
For me it didn't work.
Gesendet von meinem SM-T580 mit Tapatalk
Click to expand...
Click to collapse
Installed it now. And yes .... Magnetic Sensor doesn´t work. Is there a chance to activate it? Another Kernel perhaps or an Application? But the rest seems to work flawless. I love RR. Best Rom ever for my usage.
@Sascha_77 @Shadowghoster
Quick test ..
Pls download this file .. gtaxlwifi-lte_lid_overlay.apk
Pls place the file like this ...
1. If one is not present (it won't be by default) go into a terminal emulator on your device
and execute:
>su
>mount -o remount rw /system
>mkdir /system/vendor/overlay
2. Now copy the overlay package into that directory:
>cp /sdcard/data/framework-res-overlay.apk /system/vendor/overlay
And reboot your device .. does it work now ?
If yes, this will be included into next ROM ..
Cheers
Will test when I'm back home tonight and edit this post.
Edit: moved the file to /system/vendor/overlay and rebooted, but the cover still doesn't work.
File is in place but it doesn´t work after Reboot.
Sascha_77 said:
File is in place but it doesn´t work after Reboot.
Click to expand...
Click to collapse
Pls have a try with version v2 .. made a mistake before - used Android Studio now.
For the next releases ..
https://github.com/followmsi/androi...mmit/218485b20d7af11a21efb4aabbef275d7644e5ef
As well I have seen some new kernel changes .. new ROM in the next days.
Cheers
Can you post some sceenshots of your rom ?
v2 isn´t working too.
leakcim56 said:
Can you post some sceenshots of your rom ?
Click to expand...
Click to collapse
Have a look here ...
http://www.resurrectionremix.com/#screenshots
Sascha_77 said:
v2 isn´t working too.
Click to expand...
Click to collapse
Made a new ROM now .. including all the new changes from @Valera1978 and the overlay as well.
Quick release ..
RR-N-v5.8.5-20171201-gtaxlwifi-Unofficial.zip
RR-N-v5.8.5-20171201-gtaxlwifi-Unofficial.zip.md5sum
RR-N-v5.8.5-20171201-gtaxllte-Unofficial.zip
RR-N-v5.8.5-20171201-gtaxllte-Unofficial.zip.md5sum
Changes:
- Latest changes from @Valera1978
- Added overlay for open/wake and sleep/close lid
The next ROM will take a bit longer ..
Enjoy ..
followmsi said:
Quick release ..
RR-N-v5.8.5-20171201-gtaxlwifi-Unofficial.zip
RR-N-v5.8.5-20171201-gtaxlwifi-Unofficial.zip.md5sum
RR-N-v5.8.5-20171201-gtaxllte-Unofficial.zip
RR-N-v5.8.5-20171201-gtaxllte-Unofficial.zip.md5sum
Changes:
- Latest changes from @Valera1978
- Added overlay for open/wake and sleep/close lid
The next ROM will take a bit longer ..
Enjoy ..
Click to expand...
Click to collapse
Can i do dirty installation? Or only clean again?
This is a very pleasant surprise!! Is battery life ok? That seems to be only issue I have when going to aosp
---------- Post added at 06:34 AM ---------- Previous post was at 06:32 AM ----------
Any chance of overclock or voltage control?
I did a dirty flash of the 'quick release' (RR-N-v5.8.5-20171201-gtaxlwifi-Unofficial.zip) over the previous version, wiping cache/dalvik first. The 'flipflap' magnetic case unlocks and locks now, its a good build.
First impressions is that battery drain is about as good as stock, more time needed to give a better answer.
That was quick. Thanks. Dirty flashed it. Now the Sensor is Working. Good Job.
EDIT: If your Contactapp is crashing simply freeze or remove it and install the one from playstore.
Very nice rom and stable.gps do not work. I fixit please?
paris07121978 said:
Very nice rom and stable.gps do not work. I fixit please[emoji41]
Click to expand...
Click to collapse
I can confirm, GPS is not working.
But great rom anyway
Thanks!
Gesendet von meinem FRD-L09 mit Tapatalk
paris07121978 said:
Very nice rom and stable.gps do not work. I fixit please[emoji41]
Click to expand...
Click to collapse
Silencer3007 said:
I can confirm, GPS is not working.
But great rom anyway
Thanks!
Gesendet von meinem FRD-L09 mit Tapatalk
Click to expand...
Click to collapse
Just made a quick test with google maps .. (Device only in location settings).
The icon is shown in status bar and the device find my place quickly.
All Ok with GPS here.
Pls try clean install first .. if still not working pls post logs.
Enjoy your weekend ..
Related
Hi guys,
I've been building an extra lean CM13 ROM for hammerheadcaf with a few added features. A lot of CM packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
Key features
ROM comes with TrueSight v3.0 builtin (with a few of my own tweaks)
Up to date MOB30Y vendor from Myfluxi's and Kylon's repo
Option to choose between dialer and voice assist in lockscreen
Option to hide next alarm from expanded status bar and lockscreen
Clock font and size customizable
Hide bluetooth icon when disconnected
Disable immersive messages
HeadsUp timeout and blacklist/whitelist
Longpress power button while screen off to trigger flashlight
Battery saver options
Keyboard options
SSID in status bar
Network traffic in status bar
Volume steps
Navigation bar size
Seconds in status bar
SuperSU builtin
AdAway and Xposed builtin (in developer options)
Synapse builtin
OpenDelta builtin for delta updates
ViPER4Android builtin (and working in Enforcing)
Optimizations
Every effort has been made to optimize the ROM the most :
ROM built with SABERMOD GCC 5.4 and DRAGONTC 4.0 (O3, Graphite, Strict aliasing, Polly, OpenMP, Pthread, LTO/ThinLTO, Krait tunings and lots of extra optimization flags)
KERNEL built with SABERMOD GCC 7.0 (O3, Graphite, OpenMP and lots of extra optimization flags)
Java built with OpenJDK 8
Removed some useless debugging
Installation
You will need latest radio (2.0.50.2.29) and latest bootloader (HHZ20h)
Latest TWRP recovery 3.0.2-0 for hammerheadcaf is highly recommended (and mandatory for delta updates)
If coming from any other ROM
Backup first... always backup first
Wipe system, data, cache and dalvik cache
Install ROM
Install GAPPS (opengapps are recommended)
Enjoy !
If coming from a previous build of mine
Backup (you know it)
Dirty flash
Enjoy! (if anything goes wrong, clean flash)
Xposed app is preinstalled and available in the developer options menu. BUT, you will have to install the Xposed framework in recovery if you want it. Afterward, it will survive dirty flashes, so you only need to flash it once. Please, be smart and only install required Xposed packages. Installing too many packages can cause weird behavior and I won't be responsible for it.
Download
To download the whole ROM
AndroidFileHost
To download delta updates
Go to Settings/About phone/System updates and use the OpenDelta app to automatically download delta updates.
Delta Updates
(Information to be confirmed later)
Here are a few explanations on how to use delta updates. First, you will need to keep the first full build you downloaded on your sdcard (any full build that have NIGHTLY in the filename will do). I recommend that you keep it on the root of your sdcard until you flash a new build with the OpenDelta app. After that, the OpenDelta app will automatically place a new flashable zip inside the OpenDelta folder that will be used for the next delta updates. At that point you can delete the build on the root of your sdcard, but you will need to keep the (latest) file in the OpenDelta folder at all times to keep the delta updates working.
You will also notice a folder named FlashAfterUpdate in the OpenDelta folder. As its name suggests, any flashable zip files that you put in this folder will be flashed automatically after the update. I recommend that you put all your extra flashable zips there, cause if you use the app to auto-flash the latest build, it will reboot automatically after updating, which means you won't have the opportunity to manually flash other zips.
Support
Please consider a donation if you like my work !!!
I hope you enjoy it !!!
Thanks and credit
CyanogenMod
@myfluxi
@lol4topnz
@kylon
@xanaxdroid
@frap129
@DVDandroid
@theapuv
All the good devs who contributed to the features I added
Extra Packages
On the server you will find a file named ExtraPackages_date.zip which contains a few apps that are not available out of the box in my builds (see list). You won't have to flash it every update, since there is a survival script. I suggest you open the zip and remove the files you don't need. As such, there are 2 browsers (Browser and Gello) and 2 cameras (Camera2 and Snap).
Here is what's included:
- Browser
- Gello
- Calendar
- Camera
- Snap
- Eleven
- Gallery
- Messaging
AudioFX
Those who prefer using AudioFX instead of ViPER4Android can now download a flashable zip named V4AtoAudioFX_date.zip that I uploaded on the server. It will uninstall V4A and install AudioFX. You won't have to flash it every update, since there is a survival script.
Changelog
08/21
- Upstream updates from CM
- Removed option to have 4 or 5 columns in QS
- Added option to have seconds in status bar
- Replaced Kernel Adiutor Mod with Synapse
- Added OpenDelta (in Settings/About phone/System updates)
- ROM built with GCC 5.4 SABERMOD
Older changelogs
08/13
- Upstream updates from CM
- Added option to have 3, 4 or 5 columns in QS
- Replaced Synapse with Kernel Adiutor Mod
08/06
- Updated to 6.0.1_r61
- August security patch
- Updated TrueSight kernel to v3.0
- Latest blobs from Myfluxi and Kylon (MOB30Y)
- Upstream updates from CM
- Updated Xposed Installer from DVDandroid
- ROM built with GCC 6.1 SABERMOD
07/27
- Upstream updates from CM
- Built with latest DragonTC 4.0
07/21
- Updated TrueSight kernel to v2.8
- Upstream updates from CM
- Updated Xposed Installer (DVDandroid version)
- Used Google Webview (in hope of fixing Google Play Services battery drain)
07/10
- Updated to 6.0.1_r52
- July security patch
- Latest blobs from Kylon (MOB30P)
- Updated TrueSight kernel to v2.7
- Added option to resize the navigation bar (in buttons settings)
- Added blurred lockscreen (in lock screen settings)
- Upstream updates from CM
- Updated SuperSU and AdAway
- ROM built with GCC 5.4 SABERMOD
- Removed DragonTC for now (fixes OK Google recognition)
06/27
- Updated TrueSight kernel to v2.6
- Upstream updates from CM
- Updated XposedInstaller (DVDandroid version)
- Used CM Webview (might need a clean install)
- Built with latest DragonTC 3.9
06/16
- Updated TrueSight kernel to v2.5 (fix for data connection problem)
- Tweaked some default kernel settings
- Upstream updates from CM
- Removed optimizations for some packages (fix for OK Google hotword not working)
06/09
- Updated to 6.0.1_r46
- June security patch
- Latest blobs from Kylon (MOB30M)
- Updated TrueSight kernel to v2.4
- Upstream updates from CM
- ROM built with GCC 5.3 SABERMOD
- Built with latest DragonTC 3.9
06/01
- Updated TrueSight kernel to v2.3
- Updated UKM to v3.9.3
- Updated XposedInstaller (DVDandroid version)
- Updated SuperSU to v2.74
- Updated Webview
- Upstream updates from CM
- ROM built with GCC 6.1 Linaro
05/27
- Added SSID in status bar
- Added Network traffic in status bar
- Added Volume steps
- Upstream updates from CM
- Updated TrueSight kernel to v2.2 (with temporary audio fix)
- Built with latest DragonTC 3.9
05/20
- Updated to latest CM upstream
- Updated TrueSight kernel to v2.1
- Updated Webview
- Removed double tap to sleep on lockscreen (broken since CM LiveLockScreen)
05/12
- SuperSU 2.72
- Upstream updates from CM
05/09
- Replaced KernelAdiutor with Synapse
- UKM preinstalled and fully working
- Fixed the clock size not sticking after reboot
05/06
- Updated to 6.0.1_r43
- May security patch
- Latest blobs from Kylon (MOB30H)
- Xposed Installer from dvdandroid
- Font and size of clock is now customizable
- Built with latest DragonTC 3.9
Looks promising and right up my alley! Will test and report back!! Thanks!
Edit: which gapps do you recommend? I have been using openapps, however with cm the compatibility seems to be lacking. So I switched to slimgapps, however, they have no launcher nor keyboard with them. I can find apks for the launcher and key board, but I don't think you can install them without a launcher correct?
Well this looks good. Just one question have you removed CM Theme Engine? Not that I'm complaining, just wanted to know.
Theme engine is still in.
See second post for info on how to manually install launcher and keyboard
Seems nice, do you use JustArchi's optimizations? And can i uninstall V4A easily enough because i want to use customized one?
And opengapps do work since 25.4, just remember to not use old builds you possibly have lying around.
V4LT5U said:
Seems nice, do you use JustArchi's optimizations? And can i uninstall V4A easily enough because i want to use customized one?
And opengapps do work since 25.4, just remember to not use old builds you possibly have lying around.
Click to expand...
Click to collapse
Well I use a lot more optimization than JustArchi's. But to answer the question, I have an equivalent form of the O3 optimization JustArchi has. About V4A, if you want to use a custom apk, you can easily replace the one provided with the one you like. If it contains other mods, than it might not work as easily. I don't recommend flashing any V4A package on top of the ROM, but if you link me to file I can take a look if there is a way to make it work.
Dark_Eyes_ said:
Well I use a lot more optimization than JustArchi's. But to answer the question, I have an equivalent form of the O3 optimization JustArchi has. About V4A, if you want to use a custom apk, you can easily replace the one provided with the one you like. If it contains other mods, than it might not work as easily. I don't recommend flashing any V4A package on top of the ROM, but if you link me to file I can take a look if there is a way to make it work.
Click to expand...
Click to collapse
I plan using this http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075 ViperAtmos 4.8 sony beats edition, still not sure if i use that specific one, there are million different versions
I tried following your instructions to put the apks in the sys/app folder but I do not have such folder. I think I am missing something? I tried putting them in the data folder however did not get installed during initial boot. If you could let me know that would be awesome!
New build is up!!!
I changed my mind and added back Trebuchet (CM launcher) and the keyboard, so you won't have to mess around when you first flash the ROM (or a new build for that matter).
I won't release new builds everyday, expect them once or twice a week.
acat550 said:
I tried following your instructions to put the apks in the sys/app folder but I do not have such folder. I think I am missing something? I tried putting them in the data folder however did not get installed during initial boot. If you could let me know that would be awesome!
Click to expand...
Click to collapse
Just for the sake of answering your question (that might be useful later), you have to mount the system partition before you can access it. Then you will see what is inside that partition. It is litterally impossible that you don't have a system/app folder, all prebuilt apps go there (and in system/priv-app).
I appreciate the quick answer! I think I will just go with the new build though lol! Been looking for a ROM that is stripped down and optimized to the fence! I have been running truesight as well so the duo is perfect!
Once a week is more than enough! I'll move to this rom when i have time. One thing you could do is aroma installer, thats a whole new thing to learn but if you feel like bored or want to try something new, it would be very useful. One thing i can think of now is adding and removing apps. You could use something like Cataclysm as reference
EDIT: Do you have the TrueSight UKM thing included? Thats one more thing to add if not.
One more question, lol. Does the adb work? The cm 13 build that i currently have crashes when i turn adb on. Not sure if TrueSight causes this or what. If you havent tried it, be aware that if it does crash for you too, you probably cant turn it off anymore. That happened to me, the phone was very slow when it was in lockscreen after boot and when i tried to unlock it, it just rebooted. So take backup if you think you want to try it
V4LT5U said:
Once a week is more than enough! I'll move to this rom when i have time. One thing you could do is aroma installer, thats a whole new thing to learn but if you feel like bored or want to try something new, it would be very useful. One thing i can think of now is adding and removing apps. You could use something like Cataclysm as reference
EDIT: Do you have the TrueSight UKM thing included? Thats one more thing to add if not.
One more question, lol. Does the adb work? The cm 13 build that i currently have crashes when i turn adb on. Not sure if TrueSight causes this or what. If you havent tried it, be aware that if it does crash for you too, you probably cant turn it off anymore. That happened to me, the phone was very slow when it was in lockscreen after boot and when i tried to unlock it, it just rebooted. So take backup if you think you want to try it
Click to expand...
Click to collapse
Nope UKM is not installed. At first I had Synapse prebuilt and UKM preinstalled (before releasing), but I had too many problems with it. It never applied my settings on reboot, plus half the time it crashed when restoring my profile. Too much trouble, and I don't use the extra settings that are not available in kernel adiutor. So, if you want it you will have to install both the app and UKM.
I just enabled adb without any problems. It also works when connected to the computer.
Dark_Eyes_ said:
Nope UKM is not installed. At first I had Synapse prebuilt and UKM preinstalled (before releasing), but I had too many problems with it. It never applied my settings on reboot, plus half the time it crashed when restoring my profile. Too much trouble, and I don't use the extra settings that are not available in kernel adiutor. So, if you want it you will have to install both the app and UKM.
I just enabled adb without any problems. It also works when connected to the computer.
Click to expand...
Click to collapse
Thanks for all the answers and hard work! :good:
It seems with the new build, that notification pulldown is broken. I have tried both open gapps and slim gapps, both to no avail. Any others with this problem?
HELP
Help Devs !! Why I can't dropdown the statusbar ?? Even I can't see quicksettings at all...this is bug ?
---------- Post added at 04:47 AM ---------- Previous post was at 04:47 AM ----------
acat550 said:
It seems with the new build, that notification pulldown is broken. I have tried both open gapps and slim gapps, both to no avail. Any others with this problem?
Click to expand...
Click to collapse
Same problem with me !!! Any solution ?? (
Junnie said:
Help Devs !! Why I can't dropdown the statusbar ?? Even I can't see quicksettings at all...this is bug ?
---------- Post added at 04:47 AM ---------- Previous post was at 04:47 AM ----------
Same problem with me !!! Any solution ?? (
Click to expand...
Click to collapse
That's most likely the cm and opengapps bug. Use an old gapps package for now.
Dark_Eyes_ said:
That's most likely the cm and opengapps bug. Use an old gapps package for now.
Click to expand...
Click to collapse
Gapps suggestion please???
Junnie said:
Gapps suggestion please???
Click to expand...
Click to collapse
Try banks gapps. Maybe slimgapps too, but someone bf reported it not working...
What's up guys, even though this Nexus 4 is 4 years old, (pun not intended XD) it's still holding up strong and in time for some Nougat treatment. [emoji14]
Note: Most of the components are working and I believe that it is enough for daily tasks. However, YOU see whether it fits your needs or not.
Working:
- Audio
- Wi-Fi
- Bluetooth
- RIL
- H/W Acceleration
- USB
- GPS
- NFC
- Sensors
Semi-Working:
- Camera (Video recording stutters sometimes with some apps)
Not Working:
How to Flash:
1. Download Zip
2. Flash zip
3. Flash GApps
4. Wipe Data (If coming from anything other than 7.0)
4. Flash SuperSU (Optionnal, Uses systemless as a root method)
5. Profit
Note: You will see Fc's all along the setup, just skip them if shown. Also if Google Play Services is crashing, grant it the location permission in the settings.
Download:
AOSP 7.0 download folder
Mirror
Quanta:
Quanta V19 Test
GApps:
OpenGApps
Banks GApps
SuperSU: SuperSU Stable
Sources:
Device Tree
Kernel Source
Changelog, other stuff
Code:
V10 (18/12/16):
- Updated to Android 7.1.1
- Patched kernel with the latest security fixes.
V9: (14/10/16)
- Video recording on Camera2 partially fixed (Video shakes sometimes)
- Fixed stack trace for native processes
- Updated to October's Security patches
- Misc fixes
V8: (18/09/16)
- Kernel patched accordingly to September security fixes (Patches all Quadrooter exploits up to now)
- Fixed Torch
V7: (11/09/16)
- Updated to September security fixes (For real this time)
- Enabled H/W encoding for video recording
- Re-enabled navigation bar tweaks and night mode in SystemUI
- Fixed Google Play Services FC's using OpenGApps (For real also)
- Add possibility to change WebView provider
V6: (09/09/16)
- Updated to September security patches
- Fixed freezing while watching YouTube
- Attempt to enable LTE
- Hidden misc battery drain as it causes some misinterpretations
V5: (05/09/16)
- Enabled Doze for real this time
- Reverted a change that may have broke Camera
V4: (02/09/16)
- Fixed H/W video decoding for the most part
- Kernel: SDCard FS enabled
- Attempt to fix permissions for GApps
- Enabled Navigation Bar tweaks and Night mode in SystemUI Tuner.
V3: (30/08/16)
- Fixed Sensors
- Semi-Fixed camera
- Fixed MPDecision
- Enabled Doze
- Used Flo's developper preview N GPU drivers
V2: (28/08/16)
- Fixed audio
- Fixed GPS
- Fixed data connectivity
- Disabled the power toggle widget which caused Settings to crash on every boot
V1 (26/08/16):
- Initial release
Here's a video showing how to install the ROM. (Thanks @Swapnil Soni)
Here's another one with a little overview of it. (Thanks @DaKoin)
Build instructions:
Since some of you guys asked me how to build from scratch, I will give a walkthrough of what I mostly did.
Note that this is in no way a walkthrough in how to compile (there are several guides for that on XDA) but more a guide
on how I did my setup so you can replicate the AOSP builds on your device.
Here's what I did:
1. Download the latest AOSP revision for android-7.1 which is r6 at the time of this writing (replace with whatever required branch necessary)
Code:
repo init -u https://android.googlesource.com/platform/manifest -b refs/tags/android-7.1.1_r6
repo sync
2. Download the kernel source used for the build:
Code:
git clone https://github.com/zaclimon/android_kernel_google_msm -b mako_nougat
3. Once both sources has been downloaded, compile the kernel. Note that AOSP do have a kernel toolchain that you can use to compile
Code:
export CROSS_COMPILE "/path/to/aosp/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8/bin/arm-eabi-"
make mako_defconfig
make -j$(grep -c processor /proc/cpuinfo)
4. Copy the arch/arm/boot/zImage file to the Android source into device/lge/mako-kernel
Note: You must create the said directories if they don't exist. You also must rename the file to kernel after copy.
5. Go back to the AOSP source, and download/update/replace the following repositories for each component (relative path):
Code:
device/lge:
git clone https://github.com/zaclimon/android_device_lge_mako mako
hardware/qcom:
git clone https://github.com/zaclimon/android_hardware_qcom_audio audio
git clone https://github.com/zaclimon/android_hardware_qcom_display display
git clone https://github.com/zaclimon/android_hardware_qcom_gps gps
git clone https://github.com/zaclimon/android_hardware_qcom_media media
vendor:
git clone https://github.com/zaclimon/android_vendor_lge lge
6. Apply the following patches to each of their respective repositories:
Code:
bionic:
https://github.com/LineageOS/android_bionic/commit/81af26a3a033723fb34ddf280e33a9d4a6ce82c4.patch
frameworks/base:
https://gist.github.com/zaclimon/bb39d7f5059b63e3add3b5cad15e87db
https://android-review.googlesource.com/#/c/147266/
system/sepolicy:
https://github.com/LineageOS/android_system_sepolicy/commit/10dd0402ab62aa1a6416d7ea549a6a3eea1c6ae4.patch
7. Increase RAM usage for Jack (Only if you have 6/8GB of RAM in your system)
Code:
export ANDROID_JACK_VM_ARGS="-Xmx4g -Dfile.encoding=UTF-8 -XX:+TieredCompilation"
8. Once all the patches have been applied, we can now proceed to compile the system.
Code:
. build/envsetup.sh && lunch aosp_mako-userdebug
make -j$(grep -c processor /proc/cpuinfo) otapackage
9. The build should be in out/target/product/mako
10. Flash and enjoy!!
You're the king, buddy! ?
P.
[sntfrmnxs⁴]
first
oops, second
Thanks @zaclimon and BTW wiping data is needed?
Nitin
nitin.chobhe said:
first
Nitin
Click to expand...
Click to collapse
Ha ha ! Almost.
Sent from my Nexus 4 using Tapatalk
You're great!!
nitin.chobhe said:
first
oops, second
Thanks @zaclimon and BTW wiping data is needed?
Nitin
Click to expand...
Click to collapse
It's not necessary per se because it should boot fine. That said, as always, it's recommended to wipe so random issues are less prone to happen.
Merci infiniement !!!
Just downloaded, and works, I think we need to changes the permission so that google play service not crashing
Its people like you who make this world a better place, thank you very much!
zaclimon said:
It's not necessary per se because it should boot fine. That said, as always, it's recommended to wipe so random issues are less prone to happen.
Click to expand...
Click to collapse
Thanks man! One last question - I need N gapps for this, right?
Open gapps should be fine?
@cqloveqc what gapps did you use? And what permissions need to be modified?
Nitin
funthomasz said:
Its people like you who make this world a better place, thank you very much!
Click to expand...
Click to collapse
nitin.chobhe said:
Thanks man! One last question - I need N gapps for this, right?
Open gapps should be fine?
@cqloveqc what gapps did you use? And what permissions need to be modified?
Nitin
Click to expand...
Click to collapse
Please everybody read the note (I should make it bold so people can see it)
"Note:You will see Fc's all along the setup, just skip them if shown. Also if Google Play Services is crashing, grant it the location permission in the settings. I'm also surprised to say that even with your data not wiped, it's working."
I am coming from the fake Nexus Rom aka I do not have a custom bootloader yet. What bootloader is the best to go with?
Could someone write me a quick instruction how to get started with my situation. I bet there are a lot coming from fake nexus.
Thanks for the great work!!
wow! cool zaclimon, so quanta is now N compatible i guess? haha, gj, if i'll find any kind of fix for something, i'll pull request, and thanks alot!
aabuk said:
wow! cool zaclimon, so quanta is now N compatible i guess? haha, gj, if i'll find any kind of fix for something, i'll pull request, and thanks alot!
Click to expand...
Click to collapse
I compiled a stock kernel as I wanted to start off a fresh base if ever others wanted to use a custom kernel. (Including myself with Quanta) It is patched with Google's latest updates.
I could compile a build of Quanta and incorporate the patches required to boot Nougat but it wouldn't be fair lool.
zaclimon said:
Please everybody read the note (I should make it bold so people can see it)
"Note:You will see Fc's all along the setup, just skip them if shown. Also if Google Play Services is crashing, grant it the location permission in the settings. I'm also surprised to say that even with your data not wiped, it's working."
Click to expand...
Click to collapse
I'm using the open gapps 7.0 arm version, and after change the app permission, all is good so far
And another sergestion, can we change the original LCD density to 240 instead of the default 320 ?
This change make the desktop more attractive.
zaclimon said:
I compiled a stock kernel as I wanted to start off a fresh base if ever others wanted to use a custom kernel. (Including myself with Quanta) It is patched with Google's latest updates.
I could compile a build of Quanta and incorporate the patches required to boot Nougat but it wouldn't be fair lool.
Click to expand...
Click to collapse
hahaha, okie, atleast i got some space to look at dem kernelzz, thanks for echo
cqloveqc said:
I'm using the open gapps 7.0 arm version, and after change the app permission, all is good so far
And another sergestion, can we change the original LCD density to 240 instead of the default 320 ?
This change make the desktop more attractive.
Click to expand...
Click to collapse
This has been allowed always from build.prop, did you try that?
P.
[sntfrmnxs⁴]
Gu$houn* said:
This has been allowed always from build.prop, did you try that?
P.
[sntfrmnxs⁴]
Click to expand...
Click to collapse
Yes, I've tried that by using a es file manager, but if we can make the 240 default, we don't need to make change anymore
Damn I'm late to the party, downloading now !
And thanks a ton @zaclimon for keeping mako alive, you're the man !
@zaclimon nice work.. keep it clean please
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
-
LineageOS Builds
Code:
few notes about 20190316 update:
1. New kernel, our is very old 3.18.14, new one is 3.18.91. this is latest M105FDDU1ASB2 from relative exynos7870
2. Our wifi driver depends on the kernel. I can't just take a new kernel (or update the current one), it will most likely cause a kernel panic with the current wifi module. For some reason, samsung cut out the wifi sources/config from kernel. So I spent a week and was able to add the source of the wifi driver to the kernel and made a config for it. As result we can forgot about stand alone .ko wifi module, now it's part of kernel. And as bonus: our old wifi module's version is: 4.0.10.205Y_0903, new one is: 4.0.11.213X
3. I reviewed the defconfigs, make it similar to m10 from latest kernel, updated the file systems config (thanks to [user=5480152]@followmsi[/user]), activated pie sdcardfs sources, fixed vibrator for T585 (it was big misunderstand with dtb blocks)
4. I fixed the build logic of the dtb part (now it's part of defconfig)
5. I added doze service (power consumption)
6. I added fingerprint from xiaomi sagit (for pass safetynet check in Magisk, thanks [user=5480152]@followmsi[/user])
Code:
few notes about 20181223 update:
1. rebrand wifi, now it is loaded during the run of the wifi service, and not in init scripts, as before
2. made small updates in hwc for smooth gui
3. fixed gps for T585, may be it's quite slow, but working
4. fixed hostap for T585 (it's still buggy and sometimes turn on not from first attempt, but working)
Code:
few notes about 20181204 update:
this is huge update, a lot of changes here:
1. update for hew hardware support, now we use proprietary files from latest 8.1
- new mali driver r22 (early was old r15 version)
- new camera (new with exynoscamera3, it was missed for our tablets in 7.0)
- new OMX libs
2. latest official kernel (I asked samsung about sources few weeks ago)
- with new r22 mali support
- with new wifi driver
3. now with new hardware almost no any shims (only one missed symbol for camera), now no any shims for OMX with libui and etc
P.s. thanks [user=5480152]@followmsi[/user] for some fixes and hints.
SM-T580
17. 20191211: december security patch: https://drive.google.com/file/d/1gkEA0A7VH0DGIvI2yJWYWSwyfCbXdTn3/view?usp=sharing
16. 20191113: november security patch: https://drive.google.com/file/d/1xt8L8C8WuhEzA8x4mHyErzrmq3Ylm8Qr/view?usp=sharing
15. 20191023: october security patch: https://drive.google.com/file/d/17zVXccAuJV-Ojyh8gJBJBG6oM-IqnZ_7/view?usp=sharing
14. 20190911: fix front camera, september security patch: https://drive.google.com/file/d/1RkzvX9FE3ilut01OBSgOFP45JgICzcVl/view?usp=sharing
13. 20190811: august security patch: https://drive.google.com/file/d/16-7M4rc0q-IzCVUnTaSy9wwEOJZG6Zdg/view?usp=sharing
12. 20190707: july security patch: https://drive.google.com/file/d/1CkiJjWDfY1pq5KcF_kCNUQtqAA6n6ouw/view?usp=sharing
11. 20190518: update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1v33yHO7zBi0UCswqZaB7vj1aYJvCtvq0/view?usp=sharing
10. 20190331: another test version: wifi driver from codeaurora, correspond to our stock 4.0.10.205 version, update wifi\bt drivers and configs, remove mobicore, 3.18.137 kernel with OC (thanks @followmsi), update interfaces (health, trust, netd, composer, mapper) to new versions: https://drive.google.com/file/d/1m77GggfDTINHqxaXxzTrR0MMsThnO_ni/view?usp=sharing
9. 20190320: fix flip: https://drive.google.com/file/d/1WO1tAx8wyMJim-07Z3oaea6YWiuwZmmo/view?usp=sharing
8. 20190319: fix flip: https://drive.google.com/file/d/18tcp3h7Eh06OAPWnWTAJQqgtTo0e58rg/view?usp=sharing
7. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1Kf42kG8dnK7lxwBKXr2SjVvyqmH6bzZC/view?usp=sharing
6. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1p9rQWrHg-icHdm94g1PohaeOzwoDZhOs
5. 20190126: https://drive.google.com/file/d/1cqt_kSSjDzkDETpVhuyzkCF9EMVo5oDd/view?usp=sharing
4. 20181223: https://drive.google.com/file/d/1fWRfB3kl2vAnCwUEVzRPGOysm7Vs594k/view?usp=sharing
3. 20181204: https://drive.google.com/file/d/1xI_H5HP9gS1iL8femUaw5UltHzBrCkae/view?usp=sharing
2. 20181027: https://drive.google.com/file/d/1EAGuOUcL5Rw6_E5ZPGurRo9NYVx9dgNy/view?usp=sharing
1. 20180920: https://drive.google.com/file/d/1BFxGIqJKb0VYyaPyq9ejhWBHIOcfJ7kN/view?usp=sharing
SM-T585
15. 20191211: december security patch: https://drive.google.com/file/d/1-SjMSP6fhk8XsQ1IBZj1I2psKLaZT55Y/view?usp=sharing
14. 20191113: november security patch: https://drive.google.com/file/d/1E8KZdoXWXyZU8xop3OtdZISCX6v5fmnd/view?usp=sharing
13. 20191023: october security patch: https://drive.google.com/file/d/1o5EiqTDawP_cZYEMHKePxEGsLONw5iSh/view?usp=sharing
12. 20190911: fix front camera, september security patch: https://drive.google.com/file/d/1cz4ThdAxVFfnbk9-1rHbUd0_ue9RHOb5/view?usp=sharing
11. 20190811: august security patch: https://drive.google.com/file/d/1tY8WNyVkqS7cCeP82H8SF0n-QTlZVZtt/view?usp=sharing
10. 20190707: july security patch: https://drive.google.com/file/d/1HZoLhDRrOTU2I2a1walYPbhg35CVJCvp/view?usp=sharing
9. 20190518: update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1zPZM0Z9ItaZgfiZd13x4zT495L5LP5ux/view?usp=sharing
8. 20190331: another test version: wifi driver from codeaurora, correspond to our stock 4.0.10.205 version, update wifi\bt drivers and configs, remove mobicore, 3.18.137 kernel with OC (thanks @followmsi), update interfaces (health, trust, netd, composer, mapper) to new versions: https://drive.google.com/file/d/16JdWMFQLFj1lsTZ1LcJkS-B_suHQUDmJ/view?usp=sharing
7. 20190320: fix flip: https://drive.google.com/file/d/1NgVwKv_58nzO_HnPIOzPE_iCqhl9XbH1/view?usp=sharing
6. 20190319: fix flip, access point, gps: https://drive.google.com/file/d/1Qr62AXurpt97UyNMz8Po8eYauiFQDuJJ/view?usp=sharing
5. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1tk2hEe0yo4Bi9TdXVELEJr71vwl5AhE8/view?usp=sharing
4. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1StiJuRDl5DMERHOhkpxKfJvrGRgay2tH
3. 20190126: https://drive.google.com/file/d/1pEpEtf0vf9AUNtrkhXHilE0QO9okboIi/view?usp=sharing
2. 20181223: https://drive.google.com/file/d/1bYv4SpBAnXHr6Q7xw7CX2eCLicI-WUKm/view?usp=sharing
1. 20181204: https://drive.google.com/file/d/1FQL9SRNqHFOozlcJfSDs96VW344tTl3f/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any
Root
Install official Magisk. if Magisk Manager missed in apps - install Magisk Manager apk
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Can you release this for the T350?
Valera1978 said:
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Click to expand...
Click to collapse
I can't wait for 585!!!
Does 3.5 jack works on this rom?
I am asking this because it was dead on 64-bit treble Oreo/Pie and it was not mentioned in bugs section too.
tank0412 said:
Does 3.5 jack works on this rom?
I am asking this because it was dead on 64-bit treble Oreo/Pie and it was not mentioned in bugs section too.
Click to expand...
Click to collapse
The connection works, have tested.
Is the pie guesture navbar avaliable?
Cast not working
Good work.:good: Seems to work well. But, as with every other 64bit ROM I've tried, casting to a regular Chromecast dongle just gives a black screen and no audio. People with a Chromecast Ultra dongle tell me theirs works, but I'm retired and living on SS, so I'm not going to spend for a new dongle when it works fine in 32bit RR Oreo.
Since this seems to be a problem with all 64bit ROMs, and not just this one, I guess I'll just have to wait until it's fixed somewhere up the line.:crying:
Nice work! Would it be possible to get the pie gestures or navbar customization options added in the settings?
Currently the dark or black theme for the UI doesn't work.
As for the Chromecast problem that Lewmur is reporting as not working: can anybody confirm this? For me it is rather vital it works.
And what is actually meant by the "FC problem" with the camera. Does it just mean it is "f*cked up" or what ?
Thanks...
Valera1978 said:
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Click to expand...
Click to collapse
Really looking forward for that build. Will try it as soon as released on my T585.
I tried "Cast" with my Microsoft Wireless Display Adapter - does not work Seems to be the same than with the Android dongles.
Will this work on the P580, just without the ability to use the pen? I don't frequently use or even really like the pen anyway, so I'm fine with that, I bought the S-Pen version for the extra gig of RAM.
Good Rom, thanx. But for me GPS not working. Can you fix it please.
I have installed the Rom for a few days ago.
It's works fine and the battery is okay.
But, I have found 2 Problems / fails.
1. I can not wake up the tablet with the homebutton.
2. the Displays goes short black, when I turn it from vertical to horizontal.
Sorry for my english
AlbertHB said:
I have installed the Rom for a few days ago.
It's works fine and the battery is okay.
But, I have found 2 Problems / fails.
1. I can not wake up the tablet with the homebutton.
2. the Displays goes short black, when I turn it from vertical to horizontal.
Sorry for my english
Click to expand...
Click to collapse
Those to are lineage related i think.
Installed it on my sm-t580 and works perfekt.
Gesendet von meinem HTC U11 mit Tapatalk
Keep getting an error:7 in twrp when I go to flash the rom. Any suggestions? Also any alternate links to d/l file from?
arachniac1 said:
Keep getting an error:7 in twrp when I go to flash the rom.
Click to expand...
Click to collapse
Hi,
error 7 means (AFAIK) that the image does not fit the model of your device.
Do you have the SM-T580?
Yes, I have the Samsung tab a SM-T580 (2016) wifi gtaxlwifi. Do you think I need a different version of twrp?
[ROM][SM-T580][SM-T585][UNOFFICIAL][Lineage-16.0][32-Bit] -> 20190110 (DISCONTINUED)
DISCONTINUED
Lineage-16.0
SM-T580/585 (32-Bit)
lineage-16.0-20190110-UNOFFICIAL-gtaxlwifi.zip
lineage-16.0-20190110-UNOFFICIAL-gtaxllte.zip
Known issues:
- AdvancedDisplay (Samsung) is not working and has been taken out.
- Mobile Data connection is not working yet. (SM-T585)
- Pls use latest Magisk version (v18.x) - on earlier versions you may get bootloop. (maybe it's booting twice - don't panic)
Camera:
- Google Camera app is not working correctly - and is not tested ! -> Pls do not install yet !
- Normally if you install Google Camera app via gapps you remove the built-in camera app - pls take care yourself !
- The Lineage built-in Camera app works fine - except for rear camera video recoding. (720p)
- OpenCamera app works fine too - also no rear camera video recoding.
- Footej Camera app works fine too - rear camera video recoding is working in this app too !
- Video calling (e.g. Skype) works on front camera.
Changes:
lineage-16.0-20190110
- Google security updates -> January 2019
- A few more kernel security updates -> thanks to @cschsz
lineage-16.0-20181209
- Google security updates -> December 2018
- Notification Bar -> back to "standard" size
- A few more kernel security updates -> thanks to @cschsz
lineage-16.0-20181114
- Google security updates -> November 2018
lineage-16.0-20181102
- Fix rotation bug (black sreen) -> big thanks to @Valera1978
- Enabled NightDisplay
- Re-enabled LiveDisplay
- Some other changes
lineage-16.0-20181028
- Fix for QuickSettings icons -> thanks to @Vartom
- Fix for OMX rescaling -> needs testing on 580/585
- Workaround for Camera2 app
- Deactivated Navbar per default
- Kernel updates
- Modemloader and RIL header updates (585 only)
- Other minor changes
lineage-16.0-20181011 (64-Bit)
- Remove java overlay: DisplayColorCalibration.java -> fixes "black screen" issue
- A few more kernel security updates -> thanks to @cschsz
lineage-16.0-20181010 (32-Bit)
- Remove java overlay: DisplayColorCalibration.java -> fixes "black screen" issue
lineage-16.0-20181008
- Google security updates -> October 2018
- Fix for Doze
- fix for KeyDisabler
- Latest kernel security updates -> thanks to @cschsz
lineage-16.0-20180926
- Fix for Bluetooth
- Change for camera
- Fix for some 32-Bit apps
lineage-16.0-20180924
- Added NavBar
- Added new Android Pie gestures for NavBar (settings->system->gestures)
- Removed SELINUX warning at boot (red warning at left top corner)
- minor changes
lineage-16.0-20180923
- initial release
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data
3. Install ROM.zip
4. install opengapps
5. install Magisk.zip
6. Reboot into system
Upgrade:
1. Boot into TWRP
2. Install ROM.zip
3. Wipe cache and dalvik
4. Reboot into system
- Please install Magisk.zip yourself.
- If you face any strange issues, pls do a factory reset via TWRP first.
DOWNLOAD:
https://androidfilehost.com/?w=files&flid=289290
https://androidfilehost.com/?w=files&flid=289292
https://drive.google.com/drive/folders/1uZ4DZ1wN8dpY-AnJhCirr6RsL02PVMrE
TWRP:
Based on OMNI sources ..
twrp-3.2.3-4-gtaxlwifi-OMNI6 / twrp-3.2.3-4-gtaxllte-OMNI6
https://forum.xda-developers.com/showpost.php?p=78148216&postcount=169
https://forum.xda-developers.com/showpost.php?p=78148267&postcount=170
SOURCES:
https://github.com/followmsi/manifests/tree/gtaxl-lineage-16.0
Big thanks to @Valera1978 for all his work !
Only the SM-T580 versions have been tested .. using latest Magisk 17.x and Opengapps.
Enjoy
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL][Lineage-16.0], ROM for the Samsung Galaxy Tab A series
Contributors
followmsi
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2018-10-08
Last Updated 2019-01-10
A new fresh thread / project for Lineage-16.0 .. and I did mess up XDA
SM-T580/585 (32-Bit)
lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
SM-T580/585 (64-Bit)
64_lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
64_lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
Changes:
lineage-16.0-20181008
- Google security updates -> October 2018
- Fix for Doze
- fix for KeyDisabler
- Latest kernel security updates -> thanks to @cschsz
Enjoy
Going to be downloading this now, thanks as always
Looking forward for future updates <3
Neoninfinity said:
Going to be downloading this now, thanks as always
Looking forward for future updates <3
Click to expand...
Click to collapse
Getting errors, the rom black screens on first boot:
T580
Full Wipe
ARM64
Same issue with 64bit and 32bit
Anyone got past the black screen on first boot on the t580?
Neoninfinity said:
Getting errors, the rom black screens on first boot:
T580
Full Wipe
ARM64
Same issue with 64bit and 32bit
Click to expand...
Click to collapse
jam0688 said:
Anyone got past the black screen on first boot on the t580?
Click to expand...
Click to collapse
Running the 32-bit version for 580 without problems.
Will test clean install again .. in the next days.
If you install Magisk it may boot two times at first start .. looks like bootlooping.
En la T585 ni 32 ni 64 funcionan, se queda en negro en la pantalla de bienvenida. Sorry no write english
@Srg81185
Please only post in English. Use Google translator or another translator is needed. If a second language must be used, please place it below the English, as I did here. Thank you.
Por favor, sólo publicar en inglés. Utilice el traductor de Google o se necesita otro traductor. Si se debe usar un segundo idioma, colóquelo debajo del inglés, como lo hice aquí. Gracias.
Works fine if i factory reset but if I reinstall magisk zip again it gets the black screen again on first boot. Only way to fix is factory reset again and i lose all my installed apps. Any ideas?
jam0688 said:
Works fine if i factory reset but if I reinstall magisk zip again it gets the black screen again on first boot. Only way to fix is factory reset again and i lose all my installed apps. Any ideas?
Click to expand...
Click to collapse
Pls use version Magisk 17.2.
Good luck !
EDIT:
You can always restore boot.img (unzip ROM) and either skip Magisk or use older/newer Magisk version.
This way you don't loose any data!
For me 17.2 works fine.
That is the version i am using
jam0688 said:
That is the version i am using
Click to expand...
Click to collapse
Install Magisk via TWRP only .. on top of fresh unmodified boot.img !
Im not modifying the boot.img im just flashing the rom then factory reset then magisk and open gapps
Mod Edit: @repey6
Please do not quote the entire long post. Either use hide tags [HIDE*] content here [/HIDE*] (remove the * when using) as I did below, or only quote a small portion of the long post. Thanks.
followmsi said:
Lineage-16.0
SM-T580/585 (32-Bit)
lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
SM-T580/585 (64-Bit)
64_lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
64_lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
Known issues:
- AdvancedDisplay (Samsung) is not working and has been taken out.
- Pls use latest Magisk version (v17.x) - on earlier versions you may get bootloop. (maybe it's booting twice - don't panic)
Camera:
- Google Camera app is not working correctly - and is not tested ! -> Pls do not install yet !
- Normally if you install Google Camera app via gapps you remove the built-in camera app - pls take care yourself !
- The Lineage built-in Camera app works fine - except for rear camera video recoding. (720p)
- OpenCamera app works fine too - also no rear camera video recoding.
- Footej Camera app works fine too - rear camera video recoding is working in this app too !
Changes:
lineage-16.0-20181008
- Google security updates -> October 2018
- Fix for Doze
- fix for KeyDisabler
- Latest kernel security updates -> thanks to @cschsz
lineage-16.0-20180926
- Fix for Bluetooth
- Change for camera
- Fix for some 32-Bit apps
lineage-16.0-20180924
- Added NavBar
- Added new Android Pie gestures for NavBar (settings->system->gestures)
- Removed SELINUX warning at boot (red warning at left top corner)
- minor changes
lineage-16.0-20180923
- initial release
Installation:
1. Boot into TWRP
2. Wipe system, cache and dalvik and data
3. Install ROM.zip
4. install opengapps
5. install Magisk.zip
6. Reboot into system
Upgrade:
1. Boot into TWRP
2. Install ROM.zip
3. Wipe cache and dalvik
4. Reboot into system
- Please install Magisk.zip yourself.
- If you face any strange issues, pls do a factory reset via TWRP first.
DOWNLOAD:
https://drive.google.com/drive/folders/1uZ4DZ1wN8dpY-AnJhCirr6RsL02PVMrE
TWRP:
Based on OMNI sources .. https://forum.xda-developers.com/showpost.php?p=76564831&postcount=213
https://forum.xda-developers.com/showpost.php?p=75483069&postcount=237
https://forum.xda-developers.com/showpost.php?p=77000830&postcount=401
https://forum.xda-developers.com/showpost.php?p=77340691&postcount=433
twrp-3.2.3-0-gtaxlwifi-OMNI.img
twrp-3.2.3-0-gtaxllte-OMNI.img
SOURCES:
https://github.com/followmsi/manifests/tree/gtaxl-lineage-16.0
Big thanks to @Valera1978 for all his work !
Only the SM-T580 versions have been tested .. with Magisk 17.2 and Opengapps.
Enjoy
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL][Lineage-16.0], ROM for the Samsung Galaxy Tab A series
Contributors
followmsi
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2018-10-08
Last Updated 2018-10-08
Click to expand...
Click to collapse
Thanks for job. Mobile data working in this build? Who know?
If i reboot it gets the black screen even without magisk installed. Not sure why this is happening.
Updated to latest version ( flash zip/wipe) without problems on t580.
Microsoft remote desktop app is starting now (used to force close) but when i connect to my laptop app closes, binance app used to force close as well but is running now! Keep up the good work!
Is auto rotate still messed? Last version auto rotate screen would turned black for a second then was normal and can you remove Google bar from home..things like this drive me up the wall. Still on RR 6.2.1 no reason to update.
Reset it 3 more times and it finally started working, not sure what was wrong. Also is the notifications being misaligned a lineage bug or can this be fixed in a future update.
Otherwise good work
I was getting this too until I wiped it a few times more and it suddenly worked (only system and data)
After a few tries, the following worked for me:
Wipe all; install Linage 16 32bit and opengapps 32bit; after booting System reboot and install Magisk 17.2; wipe Davlik/Cache an boot System
dorf18 said:
Is auto rotate still messed? Last version auto rotate screen would turned black for a second then was normal and can you remove Google bar from home..things like this drive me up the wall. Still on RR 6.2.1 no reason to update.
Click to expand...
Click to collapse
Just wait for RR Pie version
FEATHER PROJECT
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Index:
OneUI 4:
|--> Galaxy S10e port for A20 Click here discontinued
OneUI 5
|--> Galaxy S22 port for A20 Click here Priority updates
|--> Galaxy M12 port for A20 Click here
Latest ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
More credits mentioned in sub pages
Release Date: 2023-04-02
Last Updated 2023-04-02
FEATHER PROJECT S22 T
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Features:
Based on S901BXXU4CWCG
Security Patch April 2023
OneUI 5.1 - Android 13
Eureka Kernel R11
Enforcing Selinux
Magisk V-25.2
Samsung Stock AOD
S22 + S23 Wallpapers
Side Key Functions
Edge Panel
Disabled FRP
VoLTE & VoWiFi
Bluetooth Calls
Flagship animations
Samsung Dex
Dolby Atmos
Enhanced GPS
AppLock
A13 Colour Palette
Secure folder pre-patched
BT lib pre-patched
OneUI5 Apps
WiFi Sharing
Bugs:
Safetynet with root only
Face Unlock
Netflix L1
Low light Photos
Moving Apps to Sdcard
Installation:
Spoiler: Installation
Installation Procedure:
Preferred Recovery: Latest TWRP
1. Make a Backup of EFS and all your important data
2. Start by wiping System,Vendor,Product,Data,Cache, Dalvik-Cache
3. Reboot to Recovery
4. Read carefully and select Wisely in Aroma Installer
5. Reboot to System
6. Install Magisk apk normally in the system
7. Update Android System Webview from Play Store by searching it
7. Enjoy
- Dex Touchpad is only supported in newer kernel 10.1+, while the rest of the Dex works fine on all kernels
Changelog:
Spoiler: Changelog
Changelog v0.1:
Initial Release S901BXXU2BVJA
Changelog v0.2:
- update audio hal
- using s10e audio policy for fixing audio
- added sdhms for battery stats
- face unlock removed for stability
Changelog v0.5:
- Added Samsung camera ui5
- Unlocked all cameras in Night mode
- Fingerprint fixed
- Audio fixes
- More minor change
Changelog v0.7
- Updated to new base S901BXXU2BVKB
- Security patch November 2022
- New integrated CSC (Asia + Europe)
- Using full S22 Oneui5 Samsung Camera
- Wide camera disabled in samsung cam
- Updated audio effects from s22
- New audio policy from s22
- Added fix for bt calls from @xnavis
- bt media still ded
- Some apps moved to user apps to save space
- Photo Editor Fixed
- Object Remover from S22 enabled & working
- Added NFC support
- Switched to dtb5
- Using complete aosp partition entries as in eureka.
Changelog v1.0:
- Updated base to S901BXXU2BVL1
- Security Patch 01 December 2022
- Internal tuning
- Graphics improved
- Switched to A51 CSC
- Auto Brightness Fixed
- FOD removed
- AOD unlocked
- AR Camera fixed
- Screen Recorder fix
- Partial fixes for DEX
- Secure Folder Patch
- BT Library Patched
- BT Media and Calls fixed
- More Camera fixups
- Fixed overnight battery drain
- Added headphone fix @xnavis
- Added Voice Focus @GalaxyA51user
Hotfix for v1.0
- Resolves the screenshot issue
Changelog v1.1
- SELinux fixes
- Dex Fixed
- WiFi hal updated
- Switched to aroma installer
- RAW support in Samsung camera
- Unlock uw camera in pro mode
- Some camera modes fixed
- Enabled Motion Photo
- Kernel upgraded to r11 final
- Optional kernels R8 enforcing R9 enforcing R11 permissive
Changelog v2.0
- New Oneui5.1
- Updated to S901BXXU3CWAI
- Security Patch updated
- Bixby added
- S22 and S23 Wallpapers combined
- Audio workaround removed
Changelog v2.1
- GPS fixed
- Quality of Wallpapers enhanced
- Patches for Secure folder
- Added applock @mujammilk_476
- Added camera assistant @GalaxyA51user
- Add R11 Enforcing (lazy)
- Revert to A51 csc
- Added debloat list from @slorixsh
- Added debloat list from @KudretP
- Chrome Audio fix up
Changelog v2.2 beta
- Base updated to S901BXXU3CWBE
- Security update March 2023
- Fixes for widevine L1 (untested)
- Fixed dual speaker mod
- Update menu for debloat
Changelog v3.0 beta
- !! fstab changed. Use Eureka fstab in mods to avoid data format
- Added band selector @FlorinelulX123
- Some more csc tweaks from @GalaxyA51user
- Fixed move App to Sdcard issue
- Fixed testing codes issue
- Fixes for Screen Record issue
- AV1 Decoding Support
- More Codec fixes
- Slightly Aggressive lmk
- Re-tuned Behaviour
Changelog v3.1
- Base updated to S901BXXU4CWCG
- Security patch April 2023
- Revert fstab changes (now Uses Eureka fstab by default)
- Magisk updated to v26.1
- Gpuwatch fixed
- DEX experience improved
- Fix wallpaper issue
- Fix a GPU throttling issue. For reporting @kudretP
- Added Dailyboard @GalaxyA51user
- Added some knox apps
- Photo clipper added by Samsung
- Overhaul audio, report any weird bugs
- Product is now Read only to preserve space
Changelog v3.2
- Fixed Secure Folder issue
- Some more Securities Disabled
Downloads:
Spoiler: Download
Do a brief reading of Installation Notes above before proceeding!
V2.1B
Google Drive : Click Here
Mega : Click Here
V3.2
Direct : Click Here
Mega : Click Here
Credits:
@kevios12 & @FlorinelulX
@Chatur27 & @Royna For Eureka Kernel
@TBM 13 for his RAW Capture libs
@ianmacd for multidisabler
@ricci206 for Secure Folder patch
@MrWaehere for CRB Kitchen
@amarullz for Aroma Installer
@GalaxyA51user for Tweaks
@mojave0 (github) for Aroma theme
@xnavis (telegram) for helping with patches
missing someone? dm me
ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
Release Date: 20-04-2023
Last Updated 20-04-2023
FEATHER PROJECT M12 T
I am not responsible for any kind of damage and or harm caused to your device by using this rom.
I assume you may know the risks of proceeding.
Features:
Based on M127FXXU4DWC4
Security Patch March 2023
OneUI 5.1 - Android 13
Eureka Kernel R11
Enforcing Selinux
Magisk V-25.2
FM Radio
S22 + S23 Wallpapers
Edge Panel
Disabled FRP
VoLTE & VoWiFi
Bluetooth Calls
Flagship animations
Samsung Dex
Dolby Atmos
Enhanced GPS
AppLock
A13 Colour Palette
Secure folder pre-patched
BT lib pre-patched
OneUI5 Apps
WiFi Sharing
Why M12 ? :
Netflix Widevine L1
Signature Verification Nuked
Working FM Radio
Better Ram Management
Bugs:
Safetynet with root only
Face Unlock
Low light Photos
Moving Apps to Sdcard
Installation:
Spoiler: Installation
Installation Procedure:
Preferred Recovery: Latest TWRP
1. Make a Backup of EFS and all your important data
2. Start by wiping System,Vendor,Product,Data,Cache, Dalvik-Cache
3. Reboot to Recovery
4. Read carefully and select Wisely in Aroma Installer
5. Reboot to System
6. Install Magisk apk normally in the system
7. Update Android System Webview from Play Store by searching it
7. Enjoy
Changelog:
Spoiler: Changelog
V2.0
- Base updated to M127FXXU4DWC4
- Security Patch March 2023
- Fixed Game Tools
- Fixed Blue Light Filter
- Fixed Extra Dim
- Some Camera Issues fixed @duhansysl
- Magisk Updated to v26.1
- Full GCAM Pre Installed
- Camera RAW support enabled
- better gaming @slorixsh
- Added R11 Enforcing
- S22 + S23 Wallpapers
- Spotify Audio issue resolved
- Fix Wired headphones issue
- Added option to Disable Extended Brightness
- Added optional Light LMK
- Added Object Eraser
- Added Reflection Remover
- Added Object Clipper
- Fixed Fingerprint issue
V2.1
- Fixes for AppLock
- Camera improved
- Sleep App Function fixed
- Minor Fixes
Downloads:
Spoiler: Download
Do a brief reading of Installation Notes above before proceeding!
V2.1
Gdrive: Click here
Credits:
@kevios12 & @FlorinelulX
@Chatur27 & @Royna For Eureka Kernel
@TBM 13 for his RAW Capture libs
@ianmacd for multidisabler
@ricci206 for Secure Folder patch
@MrWaehere for CRB Kitchen
@amarullz for Aroma Installer
@GalaxyA51user for Tweaks
@mojave0 (github) for Aroma theme
@xnavis (telegram) for helping with patches
missing someone? dm me
ROM Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Based On: OneUI 5.1
Firmware - Click me
Kernel Source: Click Here
Bluetooth lib patcher - Click me
Secure Folder patch - Click me
Feather Project Github - Click me
Feather Project Telegram: Click Here
Release Date: 12-04-2023
Last Updated 12-04-2023
This rom is soo good, thanks raptor!
This ROM is beautiful (Talking about S22 port). I'm a developer and test apps on A20, would it be possible if you add KLMS and other Knox Related stock apps please? I need knox license activation only. (I know rooting breaks knox but the KLMS agent etc they do work while being rooted. I'm using all of that stuff on my rooted S21 FE and they work fine).
Edit: As my S21 FE is also Android 13, I will try to copy all Knox related stuff into this and check !
zubair1836 said:
if you add KLMS and other Knox Related stock apps please? I need knox license activation only.
Click to expand...
Click to collapse
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
RiskyEagle said:
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
Click to expand...
Click to collapse
Thanks for quick reply. I'd prepare the list.
For now, I've manually copied the files as I said and it worked but when I restarted the phone. It locked me "Phone Locked, Authorization needed" and there was no way out.
I've wiped everything again and flashed again (this time with my original CSC because I think that could have caused that).
I'll get back to you after checking out everything.
RiskyEagle said:
Can you share a prelim list of apps that you require? Also a way to test the functionality would be great.
Click to expand...
Click to collapse
It's strange that flashing a different CSC locks the phone.
Anyways, The required files are the folders names as KLMSAgent, KnoxCore, KnoxPushManager,knoxvpnproxyhandler and KPECore.
They should be at /system/priv-app/
For now, I've made it work. But it'd be lovely if you include them in next update.
Many thanks for this Beauty
This is a realy nice ROM. Great work !!! Would it be possible to add Samsung stock Radio app?
Trying this new rom, so one question is possible add more buttons like download mod, recovery mod in turn off menu?
Amazing Rom!
does it work for A207F ?
zubair1836 said:
Anyways, The required files are the folders names as KLMSAgent, KnoxCore, KnoxPushManager,knoxvpnproxyhandler and KPECore.
They should be at /system/priv-app/
For now, I've made it work. But it'd be lovely if you include them in next update.
Click to expand...
Click to collapse
The required files are now optional in aroma. Selecting the option will remove the knox apps.
Please do notify me about your experience.
Version Update v3.2
Major Changes:
- Added Dailyboard
- Added Object Clipper Feature
- GPU Watch fixed
- April 2023 Security Patch
Downloads are updated in the main post
RiskyEagle said:
Version Update v3.2
Major Changes:
- Added Dailyboard
- Added Object Clipper Feature
- GPU Watch fixed
- April 2023 Security Patch
Downloads are updated in the main post
Click to expand...
Click to collapse
Thanks for the Knox stuff as well.
Dirty flash possible?
BasitQayyum said:
does it work for A207F ?
Click to expand...
Click to collapse
A20s is not supported
lux070 said:
This is a realy nice ROM. Great work !!! Would it be possible to add Samsung stock Radio app?
Click to expand...
Click to collapse
Stock Radio is not available in this version due S22 not supporting it.
btw Radio is available in a51 and m12 oneui5 port. Currently only at telegram for beta testing
Eliather said:
Trying this new rom, so one question is possible add more buttons like download mod, recovery mod in turn off menu?
Click to expand...
Click to collapse
I would add those but they make the system less responsive on this low end device. Also a hassle to provide security updates.
zubair1836 said:
Thanks for the Knox stuff as well.
Dirty flash possible?
Click to expand...
Click to collapse
Dirty Flash should be possible, but do a clean flash if you face bugs.
Also do take a look at installation procedure as it is also updated
Does Samsung A20e is supported ?
Fury_Craft said:
Does Samsung A20e is supported ?
Click to expand...
Click to collapse
If any a20e user is available for testing, We can add support for it.
RiskyEagle said:
If any a20e user is available for testing, We can add support for it.
Click to expand...
Click to collapse
Hi I have the a20e for testing thanks