[ROM][7.1.2] LineageOS 14.1 for Honor 5C by HassanMirza01 - Honor 5C ROMs, Kernels, Recoveries, & Other Develo

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS
For Honor 5C
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.X only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Introduction:
What is LineageOS ?
Features of LineageOS:
Unique LineageOS Features
Installation Instructions:
* -- LineageOS only supports TWRP recovery. Use any other recovery at your own risk.
* -- LineageOS only supports EliteKernelReborn. I will not provide support for those using other kernels.
* -- Download the Latest LineageOS 14.1 from 2nd Post...
* -- Delete all your Fingerprints from Stock or Elite ROM.
* -- Ensure the latest version of TWRP Recovery is installed.
* -- Ensure that Stock/unmodified 5C vendor is installed... (if you are on Elite ROM, any version, you are on stock vendor)
* -- Do Complete TWRP Backup...
* -- Wipe only Data, Dalvic, Cache, System... Dont touch other Partitions...
* -- Install LineageOS 14.1
* -- Install GApps (optional)
* -- Install SuperSU or Magisk (optional)
* -- Reboot with Pray
Click to expand...
Click to collapse
Bugs:
You tell me
READ FAQ in 4th Post to fix common things then post for new issues if you got one...
If You are having RIL Disconnecting issue, Please Flash your Original CUST Partition.... (Elite ROM has different Region CUST)
This took Countless hours to get ready... If you like it, Please Support by Donation
Special Thanks:
@Meticulus for creative & Endless work on Nougat & MM Codes.... Hats off bro...
@petya230 for his support
@felix-development for his support
@Abdullah7 for his support
@tw1st3d83 for his fixes to RIL
Source Codes:
LineageOS Source Codes
GPLv2: https://github.com/HassanMirza01/android
Contributors:
@HassanMirza01
ROM OS Version: LineageOS 14.1
ROM Kernel: EliteKernelReborn v6+ Upstreamed to 4.1.46
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.X Firmware
Based On: LineageOS
Version Information:
Status: Stable
Created on: 2017-12-03
Last Updated on: 2018-01-27

Download Links:
LineageOS:
LineageOS-14.1-20180227-hi6250-UNOFFICIAL-HassanMirza01
LineageOS-14.1-20171228-hi6250-UNOFFICIAL-HassanMirza01
LineageOS-14.1-20171203-hi6250-UNOFFICIAL-HassanMirza01
All my ROMs are available on my Blog too,,, HassanMirza01.blogspot.com
Elite TWRP Project
Press Thanks and donate if you like it

CHANGELOG:
2018-01-27 LineageOS-14.1-hi6250-20180127-UNOFFICIAL:
*Updated Security Patch
*Added vulkan Support
*Bluetooth: possibly fix BLE (Bluetooth Low Energy)
*Fix bug which always made performance the effective power profile
*Add config for VOLTE on provision.(Not Tested)
*Fixed inputchannel crash/soft-reboot
*Added BLL Support
2017-12-28 LineageOS-14.1-hi6250-20171228-UNOFFICIAL:
*Ril Fixed...
*Updated to December Security Patch
*OTG automatic now...
*Kernel Upstreamed to 4.1.46
*P10 Lite Support Added
*More tweaks and improvements
2017-12-03 LineageOS-14.1-hi6250-20171203-UNOFFICIAL:
*initial release

FAQ:
1.) What to do if My Phone got bootloop or not booting ??
You have changed vendor, or modified vendor(not stock), OpenKirin vendor will never ever work,, so get Pure stock vendor of your device... it will work for sure... if still not, change you data filesystem...
2.) What to do if my SIMs are not working ??
Go to Extras, disable dual sim, reboot phone,, now read carefully,,
1. Install hex editor app from playstore
2. Make sure you have file explorer with root privileges
3. Open hex editor and find modem,id file on this location root/sys/firmware/devicetree/base/hisi,modem_id and open it.
4. Write down all numbers in first row
5. Then go to root/system/vendor and find phone.prop and open it with text editor.
6. Find your modem id by using search and type 0x3xxxxxx where X is your number from hex reader
7. Then make it look like this:
3.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...

reserved

And how about this CUSTOM ROM? I don't know now which is better, LOS or EliterRom? What is Your opinnion @HassanMirza01

NMO-L31
HassanMirza01 said:
LineageOS
For Honor 5C
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.X only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Introduction:
What is LineageOS ?
Features of LineageOS:
Unique LineageOS Features
Installation Instructions:
Bugs:
You tell me
READ FAQ in 4th Post to fix common things then post for new issues if you got one...
This took Countless hours to get ready... If you like it, Please Support by Donation
Special Thanks:
@Meticulus for creative & Endless work on Nougat & MM Codes.... Hats off bro...
@petya230 for his support
@felix-development for his support
Source Codes:
LineageOS Source Codes
GPLv2: https://github.com/HassanMirza01/android
Contributors:
@HassanMirza01
ROM OS Version: LineageOS 14.1
ROM Kernel: EliteKernelReborn v4+ Upstreamed to 4.1.26
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.0 Firmware
Based On: LineageOS
Version Information:
Status: Stable
Created on: 2017-12-03
Last Updated on: 2017-12-03
Click to expand...
Click to collapse
Thank you Bro for this, Will it work on Honor 5c NMO-L31?

Thanks for the release, been waiting for this moment.
However it gets stuck on bootloop, and never boots for me.
Tried OmniROM too, which did the same exact thing. I followed the whole guide, and did flash on EMUI 5.0 and never had any other ROM's flashed before.
Anyone else having this problem?

I tested 26112017 build, but to get RIL on my NMO-L31C6363 (Asia), I had to use OEM VNS-L21 then flashed the ROM.

onnz423 said:
Thanks for the release, been waiting for this moment.
However it gets stuck on bootloop, and never boots for me.
Tried OmniROM too, which did the same exact thing. I followed the whole guide, and did flash on EMUI 5.0 and never had any other ROM's flashed before.
Anyone else having this problem?
Click to expand...
Click to collapse
I had same problem! It might be because previously i installed elite rom (data to f2fs). Just changed data back to ext4 and rom booted

kiejon said:
I had same problem! It might be because previously i installed elite rom (data to f2fs). Just changed data back to ext4 and rom booted
Click to expand...
Click to collapse
Thanks for your answer. However i checked that my data is ext4 so i find it very weird that it just hangs on boot.

onnz423 said:
Thanks for the release, been waiting for this moment.
However it gets stuck on bootloop, and never boots for me.
Tried OmniROM too, which did the same exact thing. I followed the whole guide, and did flash on EMUI 5.0 and never had any other ROM's flashed before.
Anyone else having this problem?
Click to expand...
Click to collapse
try to change file system,, its big issue now a days,,, i added support for f2fs nd ext4 but phone is using one,,, it overtake one on other,, see which works for u,,,,
kiejon said:
I had same problem! It might be because previously i installed elite rom (data to f2fs). Just changed data back to ext4 and rom booted
Click to expand...
Click to collapse
onnz423 said:
Thanks for your answer. However i checked that my data is ext4 so i find it very weird that it just hangs on boot.
Click to expand...
Click to collapse
try changing file system,,, see above reply for details,,,

HassanMirza01 said:
try to change file system,, its big issue now a days,,, i added support for f2fs nd ext4 but phone is using one,,, it overtake one on other,, see which works for u,,,,
try changing file system,,, see above reply for details,,,
Click to expand...
Click to collapse
Thanks for the prompt answer. However this did not work for me some for some weird reason. Is there any log file for the rom which i could take a look on and see where it hangs on at?
So far i've tried ext4 and f2fs for the data partition.

onnz423 said:
Thanks for the prompt answer. However this did not work for me some for some weird reason. Is there any log file for the rom which i could take a look on and see where it hangs on at?
So far i've tried ext4 and f2fs for the data partition.
Click to expand...
Click to collapse
which vendor u using ?? and which variant u have ??

how i can record video? it's always crash if i press record button. enabling extras option still no luck.
is that known bug?

annas_muslih said:
how i can record video? it's always crash if i press record button. enabling extras option still no luck.
is that known bug?
Click to expand...
Click to collapse
go to settings, dev options, and create an interative bug report, then redo the crash and send me,,,

HassanMirza01 said:
which vendor u using ?? and which variant u have ??
Click to expand...
Click to collapse
NEM-L21C432 and stock vendor. I did yesterday rollback to EMUI 4.0, then updated to EMUI 5.0 and the same problem still exists although i tried to reflash.

onnz423 said:
NEM-L21C432 and stock vendor. I did yesterday rollback to EMUI 4.0, then updated to EMUI 5.0 and the same problem still exists although i tried to reflash.
Click to expand...
Click to collapse
which recovery u using ?? there should be no issue for you.... its data issue for sure,,, format data and try both f2fs and ext4

HassanMirza01 said:
which recovery u using ?? there should be no issue for you.... its data issue for sure,,, format data and try both f2fs and ext4
Click to expand...
Click to collapse
I have flashed your recovery which i downloaded here: https://androidfilehost.com/?fid=745425885120756473
Tried already both f2fs and ext4n, neither boot but rather get stuck on the Lineage OS boot logo for hours. Have tried reflashing the recovery.img as well, but that does not work either.

onnz423 said:
I have flashed your recovery which i downloaded here: https://androidfilehost.com/?fid=745425885120756473
Tried already both f2fs and ext4n, neither boot but rather get stuck on the Lineage OS boot logo for hours. Have tried reflashing the recovery.img as well, but that does not work either.
Click to expand...
Click to collapse
thats weird,,, try to see if my other roms working for u,,, this will confirm if something wrong in rom or ur device....

Related

[Update] [ROM] [4.2.2] [UNOFFICIAL] [CyanogenMod 10.1] [Star Pro | Plus] [GT-S7262]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Disclaimer!
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
To know about changelog, additional features, and screenshots click on the link https://bit.ly/2CRWb9u
What's working and Known issues
Almost everything works as far as I tested the ROM.
Recoveries: TWRP | CWM
Backup
Take a backup of entire ROM, important files and folders from internal memory to your PC or memory card before flashing this build.
NOTE: Only CWM Recovery v6.0.3.7 or below and TWRP Recovery v2.6.3.0 or below are able to install CyanogenMod 10.1. Other recoveries generates errors.
Installation of CyanogenMod 10.1
Download and copy attached CM10.1 file to sdcard
Boot into TWRP Recovery
Wipe
Swipe to Factory Reset (Wipes Data, Cache and Dalvik Cache)
Back
Back
Install
Browse and select cm-10.1-20160606-UNOFFICIAL-logan2g.zip
Swipe to Confirm Flash
Reboot System
Downloads
CyanogenMod 10.1
https://www.up-4ever.org/o9mcrwx01g7r Link updated
Gapps (Google Apps)
Direct download link: https://www.androidfilehost.com/?fid=23060877490000128
Source
https://github.com/ItsAnilSingh
XDA:DevDB Information
CyanogenMod 10.1 For Samsung Galaxy Star Pro/Plus GT-S7262, ROM for the Samsung Galaxy Star
Contributors
ItsAnilSingh, Doc, Unjustified Dev, Corphish
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: S7262CM101V2
Stable Release Date: 2016-06-06
Created 2016-03-22
Last Updated 2020-01-07
Thanks bro....was waiting for usable cm for longer time.... ROM is really awesome
works perfect
ItsAnilSingh said:
Code:
* Disclaimer!
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
What's working
Everything i.e, Calls, Messages, Wifi, Bluetooth, Camera, Video Recording etc.
Known issues
No issues as far as I tested the ROM.
Recoveries: TWRP | CWM
Backup
Before installing its better to have a backup of entire ROM if anything goes wrong.
NOTE: CWM Recoveries newer than version v6.0.3.7 and TWRP Recoveries newer than version v2.6.3.0 generates errors while installing CyanogenMod 10.1.
The backup created by CWM Recovery v6.0.3.7 or older versions sometimes generates md5 mismatch error. Hence you will not be able to restore the backup.
** I used TWRP Recovery v2.6.3.0 for backup process and also for installing CyanogenMod 10.1. You can restore individual partition(s) if anything goes wrong with that particular partition(s) without having to restore entire ROM.
Steps to backup
Boot into TWRP Recovery
Backup
Select ALL partitions
Select "Skip MD5 generation during backup"
Swipe to Back Up
Installation of CyanogenMod 10.1
Download and copy attached file to your external memory card
Boot into TWRP Recovery
Wipe
Swipe to Factory Reset (Wipes Data, Cache and Dalvik Cache)
Back
Back
Install
Browse to the folder where you saved the downloaded file
Select cm-10.1-20160320-UNOFFICIAL-logan2g.zip
Swipe to Confirm Flash
Reboot System
Installation of Google Apps (Optional)
Download and copy attached file to your external memory card
Boot into TWRP Recovery
Install
Browse to the folder where you saved the downloaded file
Select gapps-jb-20130812-signed.zip
Swipe to Confirm Flash
Reboot System
Downloads
CyanogenMod 10.1
This ROM is only for Samsung Galaxy Star Pro/Plus GT-S7262 handsets
https://userscloud.com/hb2ep5vr5zbv
Password for the file: [email protected]
Gapps (Google Apps)
Visit https://wiki.cyanogenmod.org/w/Google_Apps#Older_Releases
Scroll down to CM 10.1 block and click on official AFH download link provided
Direct download link: https://www.androidfilehost.com/?fid=23060877490000128
Source
https://github.com/anilsingh1605
https://github.com/TeamButter
XDA:DevDB Information
CyanogenMod 10.1 For Samsung Galaxy Star Pro/Plus GT-S7262, ROM for the Samsung Galaxy Star
Contributors
ItsAnilSingh, Doc, Unjustified Dev, TeamButter
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Current Stable Version: S7262CM101V1
Stable Release Date: 2016-03-20
Created 2016-03-22
Last Updated 2016-03-22
Click to expand...
Click to collapse
No Dual sim!
i flashed the rom with TWRP Recovery 3.0.2-0 and there's no errors but i used Different way to wipe. i go to recovery then wipe > advanced wipe > i put mark on Dalvik\ART Cache and Cache and data and internal storage and wiped them ((Except System)) then i go back to install and i flshed the rom and it's works.
thank u very much pro it's really works great :good: but could i flash STAR Kernel V3 or not
@ItsAnilSingh Bro will you make CM 11 for this device?
BTW thanks for the CM 10.1 from it's really awesome.:highfive:
New build uploaded. Check first post for download link.
Changelog
* Fixed "App not installed" error
* Fixed Camera i.e, camera used to hang for a few seconds while taking pics
* Fixed video recording i.e, camera used to freeze while recording videos
* Fixed green bar on video overlays while playing videos
* Fixed low in-call volume bug
* Fixed PC Connection problem, caused due to AOS Fix
* Fixed pixels and other camera related info, caused due to AOS Fix
* Fixed ringer behaviour when call is blacklisted
* Fixed Terminal Emulator "force close/stop" error
* Disabled software HDR in camera; GT-S7262 doesnt support it
* Disabled automatic brightness; GT-S7262 doesnt support it
* Added some useful libs related to FM etc.
* Some other misc changes and fixes
hamzaeid said:
i flashed the rom with TWRP Recovery 3.0.2-0 and there's no errors but i used Different way to wipe. i go to recovery then wipe > advanced wipe > i put mark on Dalvik\ART Cache and Cache and data and internal storage and wiped them ((Except System)) then i go back to install and i flshed the rom and it's works.
thank u very much pro it's really works great :good: but could i flash STAR Kernel V3 or not
Click to expand...
Click to collapse
wiping the system was more necessary than others.
BatDroid said:
wiping the system was more necessary than others.
Click to expand...
Click to collapse
u right about that but some times when u wipe system and after flashing the rom it tell no OS in TWRP recovery but if u don't wipe system it will not tell u no OS and after the rom boots u could wipe factory reset and the rom gonna work fine
ItsAnilSingh said:
New build uploaded. Check first post for download link.
Changelog
* Fixed "App not installed" error
* Fixed Camera i.e, camera used to hang for a few seconds while taking pics
* Fixed video recording i.e, camera used to freeze while recording videos
* Fixed green bar on video overlays while playing videos
* Fixed low in-call volume bug
* Fixed PC Connection problem, caused due to AOS Fix
* Fixed pixels and other camera related info, caused due to AOS Fix
* Fixed ringer behaviour when call is blacklisted
* Fixed Terminal Emulator "force close/stop" error
* Disabled software HDR in camera; GT-S7262 doesnt support it
* Disabled automatic brightness; GT-S7262 doesnt support it
* Added some useful libs related to FM etc.
* Some other misc changes and fixes
Click to expand...
Click to collapse
i did not know if this a bug or not : but when i try to boll down status bar inside any game it does not boll down is this normal in CM10.1 roms or what ?
* Fixed green bar on video overlays while playing videos
Click to expand...
Click to collapse
Can you tell us fix for this? We can same issue in our star cm roms.
R.I.P Samsung Galaxy Star Pro
No more custom ROMs
Hope @FireLord would continue the development...
Hb20032003 said:
R.I.P Samsung Galaxy Star Pro
No more custom ROMs
Hope @FireLord would continue the development...
Click to expand...
Click to collapse
I'm working on CM13 at the moment for the S7262. More are on there way, don't lose hope yet
Sent from my Q5 using XDA Free mobile app
Qiangong2 said:
I'm working on CM13 at the moment for the S7262. More are on there way, don't lose hope yet
Click to expand...
Click to collapse
Were you able to boot the CM13 ROM? Thanx anyways.
Hb20032003 said:
Were you able to boot the CM13 ROM? Thanx anyways.
Click to expand...
Click to collapse
Not yet, kernel errors. Testing later today whether a new kernel I've worked on will work
Sent from my Q5 using XDA Free mobile app
Qiangong2 said:
Not yet, kernel errors. Testing later today whether a new kernel I've worked on will work
Sent from my Q5 using XDA Free mobile app
Click to expand...
Click to collapse
WoW CM13 for Star plus nice work pro i hope u finish it soon. i tried to port one once for GT-s7262 but it was not want to boot.. but i'm sure that you could make it boot. but is CM13 a little but too mush for this device i mean it well be so laggy any way good huck :good:
Qiangong2 said:
Not yet, kernel errors. Testing later today whether a new kernel I've worked on will work
Click to expand...
Click to collapse
Any news on CM13 for star Pro?
Hb20032003 said:
Any news on CM13 for star Pro?
Click to expand...
Click to collapse
Got past kernel errors, just need to reconfigure the rest of the CM13 build to account for the different kernel
Sent from my Q5 using XDA Free mobile app
Pikachu said:
Can you tell us fix for this? We can same issue in our star cm roms.
Click to expand...
Click to collapse
Edit media_codecs.xml file. Remove OMX.PV.* decoder entries.
Hb20032003 said:
R.I.P Samsung Galaxy Star Pro
No more custom ROMs
Hope @FireLord would continue the development...
Click to expand...
Click to collapse
Search other platforms too such as facebook groups and 4da. They have more to offer and a lot of people are making custom ROMs that aren't released in xda.
Yeah, FireLord is the only dev of Star Pro/Plus, but he dropped dev'ing for S7262 maybe because he thinks I stole his work.
I stole his RIL, Wifi, Bluetooth fixes even before he pushed the commits to github. I am bad, I can hack devices by just tracking their xda usernames, trust me. The same way I stole his libbinder patch. Oh sorry, but the libbinder was patched by TeamButter as far as I remember.
Lol, for booting Cyanogenmod 11, only libbinder patch is enough and that was available since ages at TeamButter github account, and FireLord is not the one who patched it.
Its @corphish and his TeamButter team who patched it, that made Cyanogenmod 11 bootable in star and star pro. And trust me, FireLord used that patch too to boot CM-11. End of the story.

[ROM][8.0.0][UNOFFICIAL] LineageOS 15.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.0 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.​
What's working :
Boots
Wifi
Bluetooth
Camera and Camcorder(video recorder)
Video Playback
Audio ( Recording and Playback )
Sensors
GPS
VoLTE
What's not working :
SELinux is permissive
Maybe more ROM specific bugs
Usb tethering function does not work.A Third party app such as pdanet might be a solutiıon.
This is the one of the first builds for cedric(Oreo), so minor bugs are expected.Please report them if any.
Flashing and updating
LineageOS clean install :
- (Optional) Wipe the data & cache & system(Backup to make sure not to loose data)
- Flash the LineageOS ROM zip from the Recovery
- (Optional) Flash the GApps to have the Google Applications
- (Optional) Every additional zip you want to flash
- Reboot
LineageOS update / upgrade :
- (Information) Don't wipe anything unless you want to
- Nothing to wipe when switching
- (FUTURE RELEASES) Might need clean, informations will be updated
- Flash the latest LineageOS ROM zip from the Recovery
- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes
- (Optional) Every additional zip you want to flash
- Reboot
For root access :
- (Information) Read the Root section of the Q&A thread​
Downloads Links
LineageOS 15.x (Unlocked Bootloader) :
Development : https://www.androidfilehost.com/?w=files&flid=231274
Google Applications (optional) :
OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 8.x, Micro or Pico)
Information : Flash the GApps before the first boot. If not, a clean flash is recommended.
Recommended Recovery (optional) :
TWRP 3.1.1-0 : https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737​
About the builds
Device tree : https://github.com/Sohamlad7/android_device_motorola_cedric/commits/lineage-15.0
Kernel sources : https://github.com/Sohamlad7/android_kernel_motorola_msm8937/commits/lineage-15.0
Vendor blobs : https://github.com/Sohamlad7/android_vendor_motorola_cedric/commits/lineage-15.0​
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Bug report should be done in following format provided in code below
Code:
What is your
LineageOS version:
LineageOS Download url:
Gapps version:
Did you
wipe:
restored with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Q&A - FAQ
LineageOS 15.0 Cedric Regular Questions and Answers : Q&A Thread​
Credits :
- The LineageOS Team
- Thanks to @Men_in_black007 @xboxfanj and @erfanoabdi for helping me throughout. Right from the beginning.
- Thanks to ROM that have been built on Legacy Server and also thanks to all the legacyserver friends
- Special Thanks to @wzedlare and @vache without them it wouldn't have been possible for us to get Nougat and Oreo
- Thanks to @jobinrjohnson and @TeamMex for helping and for contributing
- And also thanks to all the members of Moto G5 (Cedric) Dev Arena Telegram group involving in working and testing
- Let me know if i missed anyone​
XDA:DevDB Information
LineageOS 15.0, ROM for the Moto G5
Contributors
CodeZero, vache, wzedlare
ROM OS Version: 8.x Oreo
Based On: AOSP
Version Information
Status: Alpha
Created 2017-11-25
Last Updated 2017-11-30
Reserved
Current local manifest of the ROM build
Code:
<!-- https://github.com/Sohamlad7/android_development_manifest/blob/local_manifests/lineage-cedric-15.0.xml -->
CodeZero said:
Current local manifest of the ROM build
Click to expand...
Click to collapse
Congrads dude all your hardworking paid off !
Finally! You worked hard for this rom.Congratulations
Awesome. Finally its on..
Finally a oreo rom
Amazing! Downloading now!
wow, this looks stable ..
Only problem so far! Well done! Happens when clicking on the navigation setting!
aaronboy205 said:
Only problem so far! Well done! Happens when clicking on the navigation setting!
Click to expand...
Click to collapse
Its working fine for me. Did you wiped data? if not.,Do it . The lineage actions have a lot of changes form los 14 and it can cause these issues. If not please provide some logs.
jobinrjohnson said:
Its working fine for me. Did you wiped data? if not.,Do it . The lineage actions have a lot of changes form los 14 and it can cause these issues. If not please provide some logs.
Click to expand...
Click to collapse
I came from I different ROM so I cleaned flashed it!
Nice job, for G5S montana is possible to have this rom? Thank you
Wow, thanks a lot!
I have one question before starting to flash: Are the fingerprint-touchpad-gestures included in the Lineage OS build for cedric?
Cheers!
.sirhc said:
Wow, thanks a lot!
I have one question before starting to flash: Are the fingerprint-touchpad-gestures included in the Lineage OS build for cedric?
Cheers!
Click to expand...
Click to collapse
Check screenshots, they are there.
Amazing job Soham, congratulations!
Enviado desde mi Moto G5 mediante Tapatalk
I cant get this to boot - keeps asking for android decrypt password - even if I wipe data it asks for it (I know the password is but it says unsuccessful decrypt)
I presume it has something to do with selinux not being supported but since my device was encrypted I cant boot it
Tried restoring stock rom and then flashing it but same result
TheFixItMan said:
I cant get this to boot - keeps asking for android decrypt password - even if I wipe data it asks for it (I know the password is but it says unsuccessful decrypt)
I presume it has something to do with selinux not being supported but since my device was encrypted I cant boot it
Tried restoring stock rom and then flashing it but same result
Click to expand...
Click to collapse
That's a twrp issue. Go to wipe - data - change file system - ext4. Fixes it or just try to format whole data
p8tgames said:
That's a twrp issue. Go to wipe - data - change file system - ext4. Fixes it or just try to format whole data
Click to expand...
Click to collapse
doesnt work - if you change to ext4 then you cant decrypt data
I also did fastboot erase userdata which is basically the same thing
Also flashed stock recovery too and it still asks for the decrypt key
Its not a twrp issue (I did compile twrp and its my twrp im using)
I'll just stay on lineage 14.1 until selinux is fix in this
TheFixItMan said:
doesnt work - if you change to ext4 then you cant decrypt data
I also did fastboot erase userdata which is basically the same thing
Also flashed stock recovery too and it still asks for the decrypt key
Its not a twrp issue (I did compile twrp and its my twrp im using)
I'll just stay on lineage 14.1 until selinux is fix in this
Click to expand...
Click to collapse
They posted an solution in Cedric tester hub. Let me find it real wuick
Edit: use the format data option and accept by typing "yes"
Selinux isn't problem. A lot of ppl faced that. Join the tester hub If you want to read.
p8tgames said:
They posted an solution in Cedric tester hub. Let me find it real wuick
Edit: use the format data option and accept by typing "yes"
Selinux isn't problem. A lot of ppl faced that. Join the tester hub If you want to read.
Click to expand...
Click to collapse
edit ok so after booting back to lineage 14.1 encryption was gone so I flashed back to lineage 15 and it booted
Strange but seems to be the work around for it
TheFixItMan said:
Like I said - I formatted data and user data and it made no difference
if @CodeZero could please post the solution here it would be helpful as I can't boot the rom as it keeps asking for decrypt key even after formating data wiping user data and flashing back to stock rom and reflashing
Iv just booted back to lineage 14.1 so I'll just wait for more information
Click to expand...
Click to collapse
Hmm weird. Many users helped that.

[ROM][OMS7/DUI][7.1.2] CarbonROM 5.1 for Honor 5C by HassanMirza01

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Who's back? We're back.
For Honor 5C
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.X only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Introduction:
What is CarbonROM ?
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Click to expand...
Click to collapse
Features of CarbonROM:
Features can be found here...
Installation Instructions:
* -- CarbonROM only supports TWRP recovery. Use any other recovery at your own risk.
* -- CarbonROM only supports EliteKernelReborn. I will not provide support for those using other kernels.
* -- Download the Latest CarbonROM 7.1.2 from 2nd Post...
* -- Delete all your Fingerprints from Stock or Elite ROM.
* -- Ensure the latest version of TWRP Recovery is installed.
* -- Ensure that Stock/unmodified Honor 5C vendor is installed... (if you are on Elite ROM, any version, you are on stock vendor)
* -- Do Complete TWRP Backup...
* -- Wipe only Data, Dalvic, Cache, System... Dont touch other Partitions...
* -- Install CarbonROM 7.1.2
* -- Install GApps (optional)
* -- Install SuperSU or Magisk (optional)
* -- Reboot with Pray
Click to expand...
Click to collapse
Bugs:
You tell me
READ FAQ in 4th Post to fix common things then post for new issues if you got one...
If You are having RIL Disconnecting issue, Please Flash your Original CUST Partition.... (Elite ROM has different Region CUST)
This took Countless hours to get ready... If you like it, Please Support by Donation
Special Thanks:
@Meticulus for creative & Endless work on Nougat & MM Codes.... Hats off bro...
@petya230 for his support
@felix-development for his support
Source Codes:
CarbonROM Source Codes
GPLv2: https://github.com/HassanMirza01/android
Contributors:
@HassanMirza01
ROM OS Version: CarbonROM v5.1
ROM Kernel: EliteKernelReborn v7+ Upstreamed to 4.1.48
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.X Firmware
Based On: CarbonRom
Version Information:
Status: Stable
Created on: 2018-02-16
Last Updated on: 2018-02-16
Download Links:
CarbonROM:
carbon-5.1-20180216-hi6250-UNOFFICIAL-HassanMirza01
All my ROMs are available on my Blog too,,, HassanMirza01.blogspot.com
Elite TWRP Project
Press Thanks and donate if you like it
CHANGELOG:
2018-02-16 carbon-5.1-20180216-hi6250-UNOFFICIAL:
*initial release
FAQ:
1.) What to do if My Phone got bootloop or not booting ??
You have changed vendor, or modified vendor(not stock), OpenKirin vendor will never ever work,, so get Pure stock vendor of your device... it will work for sure... if still not, change you data filesystem...
2.) What to do if my SIMs are not working ??
Go to Extras, disable dual sim, reboot phone,, now read carefully,,
1. Install hex editor app from playstore
2. Make sure you have file explorer with root privileges
3. Open hex editor and find modem,id file on this location root/sys/firmware/devicetree/base/hisi,modem_id and open it.
4. Write down all numbers in first row
5. Then go to root/system/vendor and find phone.prop and open it with text editor.
6. Find your modem id by using search and type 0x3xxxxxx where X is your number from hex reader
7. Then make it look like this:
3.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...
reserved
So far works well, will report detailed after a few days of using it
My english so bad.
After flash rom, my phone usually reset and shows an error message.
Pls help me.
Thank so much.
Duytongqng said:
My english so bad.
After flash rom, my phone usually reset and shows an error message.
Pls help me.
Thank so much.
Click to expand...
Click to collapse
What rom was you on before? Did you set data to ext4? You need to give more information if want people to help you, post logs
So guys... I hope you are waiting for next Updates for this Rom...
I didn't forget it but issue is, we are working on Aosp Oreo & LineageOS 15.1 as CodeOfHonor team... And we have fixed major bugs like wifi, bt, sound, display for Oreo Roms...
Now what you suggests us to do ?? Keep working on Oreo or work on Nougat for more better experience ??
You can Join our Telegram Group with 380+ members for getting close on whats happening...
If i deserve, Press thanks or you can donate too
Just please fix the USSD codes on Nougat ROMs (LOS, Carbon...) and move on making Oreo roms better. I'm on L21 in Europe and codes don't work at all
SkaldfraNorden said:
Just please fix the USSD codes on Nougat ROMs (LOS, Carbon...) and move on making Oreo roms better. I'm on L21 in Europe and codes don't work at all
Click to expand...
Click to collapse
USSD codes works fine on Elite Rom v7.7 but on other custom ROMs USSD codes doesn't works maybe something is broken (I'm on NEM-L21)

[9.0][OFFICIAL]Resurrection Remix v7.0.2 [Tomato][NON-VoLTE][2.5GB]

[9.0][OFFICIAL]Resurrection Remix v7.0.2 [Tomato]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
​
Make sure you have a custom recovery installed And 2.5 GB System Partition (TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 15 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
Thanks To [email protected] For His Awesome Trees
VOLTE
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.​
​
XDA:DevDB Information
[9.0][OFFICIAL]Resurrection Remix v7.0.2 [Tomato], ROM for the YU Yureka
Contributors
nikhil.gohil3, tapanrgohil
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: System Partition With 2.5 GB
Version Information
Status: Beta
Created 2019-02-04
Last Updated 2019-08-10
Changelog...
=>2019-02-28
->February Security Patch Merged
->RR UpStream
->Now No Need To Flash Ambient Doze Separately Its Now YUDoze (You Can Find It Under Settings>Display>Ambient Display)
->If You Are Updating From Last RR With Doze Zip Flashed Then Remove Old XiaomiDoze From System>Privapp.
->Ambient Doze Now Use Adaptive Brightness When Doze!
->Quick Unlock And HW Key Customization WIP!!
->Still Need Button Mapper If You Want To Use HW Keys!!
=>2019-03-01
->Haptic Feedback a.k.a. Touch Vibration Fixed (Finally!!) ?
->HW Key Customisations Fixed!! (Huh?)
->Now No Need To Use Button Mapper Anymore. ??
->Still On February Security Patch. ?
=>2019-05-18
->It's Official Now
->May Security Patch Merged
->Front Cam Video Recording Fix
=>2019-06-05
->June Security Patch Merged
->Full Changelog https://get.resurrectionremix.com/to...-changelog.txt
=>2019-07-09
->July Security Patch Merged
->Full Changelog https://get.resurrectionremix.com/to...-changelog.txt
=>2019-08-10
->August Security Patch Merged
->Full Changelog https://get.resurrectionremix.com/to...-changelog.txt
Reserved 1
Sir my yureka fully dead while doing partition 2.5gb please help me to recover my phone i have tried every thing but nothing is working.
buneys07 said:
Sir my yureka fully dead while doing partition 2.5gb please help me to recover my phone i have tried every thing but nothing is working.
Click to expand...
Click to collapse
Restore Backup Of Stock Partition
buneys07 said:
Sir my yureka fully dead while doing partition 2.5gb please help me to recover my phone i have tried every thing but nothing is working.
Click to expand...
Click to collapse
If you have working fastboot menu, try this method
1. Download this zip
https://androidfilehost.com/?fid=745849072291689565
2. Extract the zip
3. Rename flash.txt into flash.bat
4. Flash it in fastboot menu
5. Flash twrp and flash any custom/stock ROM
If your IMEI is wrong, try this method
If you didn't have a working recovery or fastboot menu, try this method
https://www.skyneel.com/unbrick-hard-bricked-yu-yureka
Thanks but still need help
Rajendran Rasa said:
If you have working fastboot menu, try this method
1. Download this zip
https://androidfilehost.com/?fid=745849072291689565
2. Extract the zip
3. Rename flash.txt into flash.bat
4. Flash it in fastboot menu
5. Flash twrp and flash any custom/stock ROM
If your IMEI is wrong, try this method
If you didn't have a working recovery or fastboot menu, try this method
https://www.skyneel.com/unbrick-hard-bricked-yu-yureka
Click to expand...
Click to collapse
i just manage to get my twrp back but after this i have got this error please check and help me mount error not what can i do to get my phone back live i will be really very thankful to you.
need help
Rajendran Rasa said:
If you have working fastboot menu, try this method
1. Download this zip
https://androidfilehost.com/?fid=745849072291689565
2. Extract the zip
3. Rename flash.txt into flash.bat
4. Flash it in fastboot menu
5. Flash twrp and flash any custom/stock ROM
If your IMEI is wrong, try this method
If you didn't have a working recovery or fastboot menu, try this method
https://www.skyneel.com/unbrick-hard-bricked-yu-yureka
Click to expand...
Click to collapse
i just manage to get my twrp back but after this i have got this error please check and help me mount error not what can i do to get my phone back live i will be really very thankful to you.
buneys07 said:
i just manage to get my twrp back but after this i have got this error please check and help me mount error not what can i do to get my phone back live i will be really very thankful to you.
Click to expand...
Click to collapse
Flash twrp 3.2.3
2.5g partition
buneys07 said:
i just manage to get my twrp back but after this i have got this error please check and help me mount error not what can i do to get my phone back live i will be really very thankful to you.
Click to expand...
Click to collapse
can anyone help me please guide me the simple process of 2.5gb increase partition i am very confuse they showing lot of process if possible please tell me the simple steps of increase partition for my yureka AO5510
i will be really very thankful to you.
no need to d 2.5 gb partition
nikhil.gohil3 said:
[9.0][UNOFFICIAL]Resurrection Remix v7.0 [Tomato]
Resurrection Remix P
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
​
Make sure you have a custom recovery installed And 2.5 GB System Partition (TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 15 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
@venkysai87 @TheButti @jmjxperia @pranavasari
As Of Now HW Key Customisation Not Workig Use Button Mapper With Root,If You Want To Use Ambient Doze Then Look Post No.(2)
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.​
​
XDA:DevDB Information
[9.0][UNOFFICIAL]Resurrection Remix v7.0 [Tomato], ROM for the YU Yureka
Contributors
nikhil.gohil3, tapanrgohil, @venkysai87 @TheButti
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
ROM Firmware Required: System Partition With 2.5 GB
Version Information
Status: Beta
Beta Release Date: 2019-02-04
Created 2019-02-04
Last Updated 2019-02-04
Click to expand...
Click to collapse
i flash rom without 2.5gb partition and its flash successfully no need to 2.5gb partition just flash and enjoy thanks.
Which method you apply before mobile brick to increase partition 2.5gb?
Great job devs.
New Delayed Update Is Uploaded Get Resurrected...
Changelog...
->February Security Patch Merged
->RR UpStream
->Now No Need To Flash Ambient Doze Separately Its Now YUDoze (You Can Find It Under Settings>Display>Ambient Display)
->If You Are Updating From Last RR With Doze Zip Flashed Then Remove Old XiaomiDoze From System>Privapp.
->Ambient Doze Now Use Adaptive Brightness When Doze!
->Quick Unlock And HW Key Customization WIP!!
->Still Need Button Mapper If You Want To Use HW Keys!!
Hot Fix ? Update Is Uploaded Get Resurrected...
Changelog...
->Haptic Feedback a.k.a. Touch Vibration Fixed (Finally!!) ?
->HW Key Customisations Fixed!! (Huh?)
->Now No Need To Use Button Mapper Anymore. ??
->Still On February Security Patch. ?
I appreciate your hard work brother.?
Gps not working on device only setting..
Cast Problem.
There's a problem with cast functionality on every single Pie rom for tomato, on Oreo it worked fine. Whenever I try to cast it crashes and SystemUI restarts. I think its a problem with wifi drivers.
You can look into the problem if you want otherwise it doesn't matter.
Other than that you're doing a great job.
Plzzz add volte feature ...
Sent from my YU5510 using Tapatalk
New Official Update Is Uploaded Get Resurrected...
=>2019-05-18
->It's Official Now
->May Security Patch Merged
->Front Cam Video Recording Fix

[ROM][9.0][OFFICIAL] LineageOS 16.0 for Xiaomi Redmi 3S/3X/Prime

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS Android Distribution
Code:
#include <std_disclaimer.h>
/*
*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! You are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* For who wants to put to any other mobile phone, please put the credit on the above. please help.
*
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Requirements
Unlocked bootloader
Click here to unlock your bootloader
Installed TWRP Recovery
Click here to download latest version
Instructions
Download ROM
Reboot to TWRP Recovery
Wipe Data
Wipe Internal (if necessary)
Wipe Cache
Wipe System
Wipe Vendor
Install ROM
Reboot
Downloads
ROM
https://download.lineageos.org/land
GApps ARM64
https://opengapps.org/?api=9.0&variant=pico
Extras
https://download.lineageos.org/extras
BusyBox
https://github.com/yashdsaraf/bb-bot/releases
What's working
Audio
Automatic Rotation
Bluetooth
Camera (rear & front)
Camcorder
Encryption
Flashlight
Fingerprint
FM Radio
F2FS Support
GPS
Hotspot
IR Blaster
Lights
Modem
RIL (IMS, Calls, SMS, Data)
SELinux Enforcing
Sensors
USB OTG
Vibration
VoLTE
Video Playback
Wi-Fi
etc...
Known issues
-
Report bugs
Don't report bugs if you're running a custom kernel or any modules.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
ROM Information
Official LineageOS 16.0, ROM for the Xiaomi Redmi 3S/3X/Prime
Contributors
TingyiChen, LineageOS Developers
Source Code: https://github.com/LineageOS/android_device_xiaomi_msm8937-common/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: AOSP
Devices: land
Treble: Yes
Version Information
Status: NIGHTLY
Nightly Release Date: 2019-10-07
Reserved
Stable
I have an issue.
1. Unlocked bootloader - Success
2. Flashed TWRP - Success
3. Flashed this ROM- lineage-16.0-20191009-nightly-land-signed - Success
4. Flashed open_gapps-arm64-9.0-nano-20191009 - Success
Device was successfully able to boot into Lineage OS. But when I flashed Gapps, I am stuck at the boot animation for more than 5 minutes and then the device again booted into TWRP...
#copy_mesaage
How to fix this??
Just try it
01avi said:
I have an issue.
1. Unlocked bootloader - Success
2. Flashed TWRP - Success
3. Flashed this ROM- lineage-16.0-20191009-nightly-land-signed - Success
4. Flashed open_gapps-arm64-9.0-nano-20191009 - Success
Device was successfully able to boot into Lineage OS. But when I flashed Gapps, I am stuck at the boot animation for more than 5 minutes and then the device again booted into TWRP...
#copy_mesaage
How to fix this??
Click to expand...
Click to collapse
Simultaneously install ROM > GApps then wipe data, cache, reboot
Could you please make lineage os 17 official build @hadaddarajat
[deleted]
hadaddarajat said:
Simultaneously install ROM > GApps then wipe data, cache, reboot
Click to expand...
Click to collapse
That issue still remains bro. Wiping data and cache not helping.
Thank you
Updated from lineage-16.0-20191007-nightly-land-signed to lineage-16.0-20191009-nightly-land-signed via built in updater and now I device bootloops.
It stays on boot logo for some time and then reboots back to TWRP with RescueParty console message.
Using twrp-3.3.1-1-land
lineage-16.0-20191009-nightly-land-signed does not work with open_gapps-arm64-9.0-pico-20191010
- eternal reboot in twrp. Without gapps, everything is fine.
before, los 15.1 and viperos 6.7 worked fine with gapps pico.
samfix said:
lineage-16.0-20191009-nightly-land-signed does not work with open_gapps-arm64-9.0-pico-20191010
- eternal reboot in twrp. Without gapps, everything is fine.
before, los 15.1 and viperos 6.7 worked fine with gapps pico.
Click to expand...
Click to collapse
yes I am without gapps and worked fine, because 2 GB of RAM. But how does the Gcam apk run without gapps?
isstrue said:
yes I am without gapps and worked fine, because 2 GB of RAM. But how does the Gcam apk run without gapps?
Click to expand...
Click to collapse
I could not enable Camera 2 API at all by modifying build.prop so I doubt it works right now.
Mad are u stilling credits and copy pasted threads. soon thread will close i m contacting moderators now.
guys dont thanks and respond to the thread.
Sent from my ASUS_X00TD using XDA Labs
---------- Post added at 02:02 AM ---------- Previous post was at 02:01 AM ----------
Akansh25 said:
Could you please make lineage os 17 official build @hadaddarajat
Click to expand...
Click to collapse
he is retard copy the work he not dev
Sent from my ASUS_X00TD using XDA Labs
Fake Thread You're Not Even Maintainer !! Reported
Fake thread ...
Wow.. you admited as contributors for this rom.. :angel:
hadaddarajat said:
Simultaneously install ROM > GApps then wipe data, cache, reboot
Click to expand...
Click to collapse
01avi said:
I have an issue.
1. Unlocked bootloader - Success
2. Flashed TWRP - Success
3. Flashed this ROM- lineage-16.0-20191009-nightly-land-signed - Success
4. Flashed open_gapps-arm64-9.0-nano-20191009 - Success
Device was successfully able to boot into Lineage OS. But when I flashed Gapps, I am stuck at the boot animation for more than 5 minutes and then the device again booted into TWRP...
#copy_mesaage
How to fix this??
Click to expand...
Click to collapse
Ok.
This is a fake thread. But the issue is real. If anyone could please tell how to fix the issue, it will be helpful.
01avi said:
Ok.
This is a fake thread. But the issue is real. If anyone could please tell how to fix the issue, it will be helpful.
Click to expand...
Click to collapse
Try micro gapps..
New Update
isstrue said:
View attachment 4840467 Thank you
Click to expand...
Click to collapse
Try updating the ROM from build 2019-10-09 to the latest version 2019-10-10
Urgent
This ROM is officially from LineageOS and I didn't make it, thanks to the entire LineageOS team

Categories

Resources