Help me, my phone swims back to the Google verification interface. The installation of LGUP cannot be opened, prompting the driver mismatch. Does the dagod provide the LGUP drive of VS988
Related
Hello guys.
I've been trying to do this on my LG Optimus L5 II E451g and it doesn't work. I can do the NORMAL FLASH but it didn't fix my problem so I want to do the CSE FLASH (to do a clean install). But I can't do that one.
Everything goes fine until the third step: "Wait until software extraction is complete..." then after a few seconds it crashes "LGUserCSTool LG Mobile has stopped working".
I'm using Windows 7 Ultimate SP1.
I tried different drivers, the old method with the host file automated (says the phone is not connected but it is), LG Update Tool 2014 and KDZ Update but nothing works. This error says the module with trouble is "msvcr100.dll". KDZ file is in the software folder, Windows recognizes the phone when I conect it to enter Download Mode, I installed every Visual C++ package I found, everything seems fine but it doesn't perform the CSE FLASH. It does the NORMAL FLASH so the KDZ is fine.
I'm sick of this. I don't want to buy a new phone. Anybody has any idea???
Regards.
I have EXACTLY the same problem here.
And I can't flash KDZ to at least recover the phone. System got corrupted, so it doesn't boot. Recover doesn't work (just shows the open robot with the exclamation sign). Download Mode works but the tool throws this error.
I was running a MarshMallow update for the last 6 months and suddenly today morning I just decided to flash the "rootedsystemh960a.tot" from one of the forums here at XDA. First it did flashed the ROM using LGUP but then the Phone was stuck with LG LOGO for minutes and then I flashed it again with my stock UAE MM 6.0 ROM. It did work. Then I reflashed again hoping for the ROOTED ROM to work on my phone and ever since LGUP is giving me this error code with a message " lgup error code 0x2000 invalid command response" and it keeps crashing. Now I have tried to switch windows and tried to flash many ROMs and it wont stand a chance. Why this error message is coming? Can anyone of you experts figure this out? Even the COM ports are matching at LGUP and in my DEVICE MANAGER. Please help me. I am stuck with this mobile. ...:crying:
Little info about my phone. It is a UAE/DUBAI Variant of LG V10 - H960A, and officially I am not allowed to unlock my BOOTLOADER by the LGE itself. I had tried before bootloader unlock modes.. Anyways its not the point here right now.. The main thing is LGUP is crashing again and again.. Is there any other utility in place of LGUP for flashing LG ROMS ????
Well that .tot file was for Lollipop only that was your mistake in this probably and it has corrupted your system somehow. I'm afraid I have no idea how to deal with this phone as I don't modify this one myself because of the lack of development/devs.
I think there is something called LGFlashTool also.
dannejanne said:
Well that .tot file was for Lollipop only that was your mistake in this probably and it has corrupted your system somehow. I'm afraid I have no idea how to deal with this phone as I don't modify this one myself because of the lack of development/devs.
I think there is something called LGFlashTool also.
Click to expand...
Click to collapse
Even flashtool aint doing a job.. When I try to run Get device info from within the LG FlashTool, the application crashes...God! Cant they develop some stable running apps for their customers?
Hi,
can you enter the download mode on your V10? Then it might be possible to flash a clean (unrooted) MM via LG Bridge. Some time ago I tried to install the latest MM Version V20e on my V10 with LGUP. For some reason that failed and left me with a phone without ROM, too. Afterwards the V10 was not recognized by LGUP anymore.
Luckily I was still able to enter the download mode manually. So I connected the phone to my PC and started LG Bridge which still did recognize it as a V10 H960a. So selecting Firmware update and then clicking in the bottom right corner of the window on a link saying something like "repair flash errors" or "repair update errors" (I'm currently at work and cannot check) did a complete clean install of the latest firmware.
Maybe you're lucky and this works for you too.
cyvr1 said:
Hi,
can you enter the download mode on your V10? Then it might be possible to flash a clean (unrooted) MM via LG Bridge. Some time ago I tried to install the latest MM Version V20e on my V10 with LGUP. For some reason that failed and left me with a phone without ROM, too. Afterwards the V10 was not recognized by LGUP anymore.
Luckily I was still able to enter the download mode manually. So I connected the phone to my PC and started LG Bridge which still did recognize it as a V10 H960a. So selecting Firmware update and then clicking in the bottom right corner of the window on a link saying something like "repair flash errors" or "repair update errors" (I'm currently at work and cannot check) did a complete clean install of the latest firmware.
Maybe you're lucky and this works for you too.
Click to expand...
Click to collapse
Well hello, I found the solution for my problem and I was able to flash the ROM successfully. Its some kind of new utility amalagamated with LGUP and it does flash without any problems. Found out it was related to some corrupt dll file or incompatible file I had in my LGUP library for the ROM FLASHING to fail all the time... You just read this first post on this link and you will be all fine. Trust me ...:highfive::good::fingers-crossed::fingers-crossed:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Just dont forget to follow the rules exactly as mentioned and if you can run it in the Virtual Machine I would prefer you to do that but you have to do everything like installing LG DRIVERS + LGUP + LGUP DLL FILE + UPPERCUT as mentioned in this post. Because if you are running antivirus on your PC, it will detect this UPPERCUT TOOL as some trojan horse or some kind of malware. I did that in my VM as I already had my VM configured for my LG V10 Flashing process.
Do it and do let me know should you encounter any problem. May be I can help later on.
hello i got an issue with lgup many versions ..
i installed al requeried files..commons..dlls..and lgup still not showing process tab..
i mean cannot see refurbished, upgrade....to select..so i cannot load kdzx to lgup
i already try store version and frame version and still got that issue..
lg flashtool just say contact programm administrator..l
any suggestion to enable that tabs in lgup
PD
alrready try uppercut and isnt enabled that options..
Hi everyone,
After an error occurred during ROM installation, my 998 was stuck at the boot screen.
My phone can still access TWRP and download mode so I tried KDZ but currently LGUP does not recognize the phone.
I have tried many different versions of LGUP and I am sure I installed it correctly but there is still no way to access LGUP.
So can anyone show me a solution?
Thank you for reading. And sorry for my bad English
Duplicate thread.
Answered here:
https://forum.xda-developers.com/lg-v30/how-to/lgup-recognize-phones-t4065403
hey guys!
so i wanted to root my moto g6 on my laptop and everything was going smoothly. i downloaded a new rom, TWRP and the adb. when i went to install the motorola drivers, the installer got stuck on stage 2 and then a small dialogue box appeared entitled motorola driver installer which stated "the parameter is incorrect". when i clicked OK. the dialogue box closed and another software with the name of motorola driver installer opened but that could not do anything. i ultimately exited it too. after i exited the driver the main software which was hung continued and after some time stated that the installation is complete. however whenever i search for fastboot devices mine does not show up.
i have searched the net for a solution even ran a chkdsk which was a total waste of my time. now i need help with this. can someone suggest another solution?
I also encountered this issue. Did you managed to fix it?