[Mod] AR Stickers For Moto G5S Plus OS 8.1.0 - Moto G5S Plus Themes, Apps, and Mods

I created AR Stickers MODS that works with Moto G5S Plus.
Just to instal and enjoy:good:
Using
■ROM
-vocoderism: [ROM][8.1.0][Sanders] Unofficial Pixel Experience [AOSP][r1][ 64bit]
-[ROM][8.1.0_r1][OFFICIAL] Cosmic-OS v3.1 - Universe [sanders]: Dan Linhares thanks feedback!
-non-rooted
-It may work on OS 8.1.0 all devices.
■Recovery
-CheckYourScreen:[RECOVERY][UNOFFICIAL][Sanders] TWRP-3.2.1-r15 (64bit Supported!)
■My STEPS
1.Make a full backup from TWRP in case anything goes wrong
2.install Mod zip from TWRP
■ZipFile
-androidfilehost:Ar_Stickers_MOD_for_Pixcel_AOSP_8.1.0_v1.7.zip
-androidfilehost:Ar_Stickers_MOD_for_Pixcel_AOSP_8.1.0_v1.6.zip
■chage log
2018/1/9
V1.7
- GCam5.1.018-Arnova8G2-V1.5Beta2 used
2018/1/6
V1.6
- GCam 5.1.018 - Arnova 8 G 2 - V 1. 4 used
-Lens Blur mode /portrait mode work fine
Source of topic: https://www.xda-developers.com/enab...kers-nexus-5x-nexus-6p-oneplus-3-xiaomi-mi-5/
Contributors
-Iancort
-Arnova8G2
Version Information
Status: Testing
Created 2017-12-31
Last Updated 2018-1-9

TA1513 said:
I created AR Stickers MODS that works with Moto G5S Plus.
Just to instal and enjoy:good:
Using
■ROM
-vocoderism: [ROM][8.1.0][Sanders] Unofficial Pixel Experience [AOSP][r1][ 64bit]
-[ROM][8.1.0_r1][OFFICIAL] Cosmic-OS v3.1 - Universe [sanders]: Dan Linhares thanks feedback!
-non-rooted
-It may work on OS 8.1.0 all devices.
■Recovery
-CheckYourScreen:[RECOVERY][UNOFFICIAL][Sanders] TWRP-3.2.1-r15 (64bit Supported!)
■My STEPS
1.Make a full backup from TWRP in case anything goes wrong
2.install Mod zip from TWRP
■ZipFile
-androidfilehost:Ar_Stickers_MOD_for_Pixcel_AOSP_8.1.0_v1.7.zip
-androidfilehost:Ar_Stickers_MOD_for_Pixcel_AOSP_8.1.0_v1.6.zip
■chage log
2018/1/9
V1.7
- GCam5.1.018-Arnova8G2-V1.5Beta2 used
2018/1/6
V1.6
- GCam 5.1.018 - Arnova 8 G 2 - V 1. 4 used
-Lens Blur mode /portrait mode work fine
Source of topic: https://www.xda-developers.com/enab...kers-nexus-5x-nexus-6p-oneplus-3-xiaomi-mi-5/
Contributors
-Iancort
-Arnova8G2
Version Information
Status: Testing
Created 2017-12-31
Last Updated 2018-1-9
Click to expand...
Click to collapse
There is a bug or glitch in this 1.7 version.
How ever at start everything was fine later on after some time this happened(Check Screen shot)
we have to restart the phone in order to fix it ...
Anyways thanks allot for AR stickers <3
Please fix it <3
i wish u will do it

Related

[ROM][KK][4.4.2][KOT49H] SamKat v1.4.2 NEO V

ROM][KK][4.4.2][KOT49H] SamKat v1.4.2
NOTE : By downloading and flashing SAMKAT Rom you agree that I am not responsible for any damage that this may cause your phone or life
Click to expand...
Click to collapse
screenshots
Based on omnirom
Features
All of omnirom’s features
Full galaxy S4 experience & Apps by Samsung
GalaxyS4 lock Screen
ads free
ro.config.low.ram=false
s view by hatroid
​What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wi-Fi
Bluetooth
USB mass storage
HW accelerated GUI
HW accelerated video
Camera
Torch
Wi-Fi/USB tethering
USB OTG
Vsync
Hybrid ION/PMEM
Annoyances
Minor graphic glitches
not pre rooted​
Links
SamKat_v1.4.2 neov.zip
Root package.zip
No gapps required
To change theme from stock to Samsung Galaxy S4 go to:
1. Settings.
2. Click on Themes.
3. Choose Theme 1.
4. Click on Apply to change it.
5. Restart phone
Important: to factory reset you must reinstall the rom because most of the apps are on the data partition
Part of the SamKat Project for all devices
Anyone interested in porting this rom or can help the development can PM theonepharaoh
​Thanks to
theonepharaoh , saatvik2012 , vishal_android freak , chainfire , andev888, Samsung corp. omnirom team
Anyone else I have forgotten
XDA:DevDB Information
SamKat NEO V, a ROM for the Sony Ericsson Xperia Neo
Contributors
theonepharaoh
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: OMNIROM
Version Information
Status: Beta
Current Stable Version: 1.4.2
Stable Release Date: 2014-02-28
Current Beta Version: 1.4.2
Beta Release Date: 2014-02-28
Created 2014-02-28
Last Updated 2014-02-28
Reserved
Reserved
some screenies please

[ROM] Dec 12rd, 2017-BOA_U11_Oreo_V7.0.3

12-12-2017 BOA_U11_Oreo_V7.0.3
Update & fix items:
Fix aroma install
Add All HTC Widgets
Add Screen Capture Tool
Add HtcAlexa
link:BOA_U11_Oreo_V7.0.3
__________________________________________________ _______________________________
old version:
12-11-2017 BOA_U11_Oreo_V7.0.2
Update & fix items:
Add a variety of telecommunications configuration
link:BOA_U11_Oreo_V7.0.2
12-5-2017 BOA_U11_Oreo_V7.0.1
Update & fix items:
based on 2.31.709.1
System configuration adjusted to the United States
Framework cancel deodex
link:BOA_U11_Oreo_V7.0.1
12-4-2017 BoA U11 V7.0 Oreo
Update & fix items:
Replace the installation wizard Welcome screen
based on 2.31.709.1
Single / dual card system configuration
Updated Magisk version is 14.5
Add U11 + tablecloth
Turn on multi-user functions
link:BoA U11 V7.0 Oreo
XDA:DevDB Information
BOA U11, ROM for the HTC U11
Contributors
boa19861105
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Android 8.0
Based On: HTC
Version Information
Status: Stable
Current Stable Version: V7.0.2
Stable Release Date: 2017-12-08
Created 2017-12-08
Last Updated 2017-12-11
retain~~~~~~~~~~
I can install tu dual SIM cid:J15?
Flash failed
The final step in the installation is done instantly and virtually nothing is written to / system. At least on my device (u11-u3w) is the case.
TWRP version: latest(3.2.0-0)
Hentioe said:
The final step in the installation is done instantly and virtually nothing is written to / system. At least on my device (u11-u3w) is the case.
TWRP version: latest(3.2.0-0)
Click to expand...
Click to collapse
Same,during installation,when in final step,press next,but no response.....try 3 times.....
Sent from my [device_name] using XDA-Developers Legacy app
shukyuen said:
Same,during installation,when in final step,press next,but no response.....try 3 times.....
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
re-upload
boa19861105 said:
re-upload
Click to expand...
Click to collapse
Still error at flashing nothing happen after choosing option in aroma
I am flash this rom finish but nothing happen.
I am try flash three time but not work for me.
So will this work with the Sprint variant?

[Magisk Module][Android 10] GCAM_AUX_Enabler

Good day everybody,
Those that tried the latest GCAM ports on the Android 10 beta builds, might have noticed that switching to wide angle lens currently crashes GCAM.
This is due to selinux-denials. A common practice is to switch selinux to permissive, which you shouldn´t do.
This module patches the specific selinux-denials and allows GCAM to function properly while keeping selinux at enforcing!
There´s really not much to it. Instructions below!
Currently tested on GCam_7.2.010_Urnyx05-v2.2.apk and confirmed working
Instructions:
1. Download the magisk module and make sure you´re on the latest version of Magisk!
2. Flash the module in Magisk Manager App
3. Reboot and profit!
Download: https://www.androidfilehost.com/?fid=4349826312261720926
Have fun and everybody a nice day
XDA:DevDB Information
[Magisk Module][Android 10] GCAM_AUX_Enabler, Tool/Utility for the ASUS ROG Phone II
Contributors
Freak07
Version Information
Status: Stable
Created 2020-02-11
Last Updated 2020-02-11
mine
and this one too maybe for future use
Thanks)

Reaper Treble A64 Custom Vendor

Reaper Treble V2.3
This is a vendor for G610X based on Galaxy J6 February security patch.
How to install:
• Flash Create Vendor 2.0 from @anan1211's Spaget project if you haven't already.
• Download Reaper treble zip.
• Download ARM32_Binder64-A-only GSI ( simply A64-A-only ) of your choice which fits in your system partition (EvoX works)
• Extract *.img file from the downloaded GSI.
• Reboot to recovery and wipe system, vendor, data and caches.
• Flash ReaperTreble and GSI or the otherway around.
• Flash Gapps ARM32(optional)
• Reboot and enjoy!
Changelog:-
• Changed WiFi drivers and configs.
• Updated Memory Controller.
• Updated Kernel to Kraken Kernel RC-14.
Bugs:-
• Hardware keys (back,home and recents) doesnot seem to work. Will be fixed soon hopefully. (Fixed)
• Offline charging in Q GSIs
• Stretched Camera in 4:3 ratio and in tg. Messenger camera works fine tho.
• You tell us.
Only for G610X at the moment. Next update will include J730X and J530X most likely.
Download v2.3: Link
Powered by Kraken Kernel!?
PS:I've seen some folks going out and flashing ARM64 GSI and telling it doesn't boot. If you do anything out of instructions, no support.
By: @soulr344
Credits to: @therealmodder, @ananjaser1211, @SP4RT4C, @DAvinash97 and all of my testers. Without you guys, this would be impossible.
XDA:DevDB Information
ReaperTreble A64, ROM for the Samsung Galaxy J7
Contributors
soulr344, therealmodder, ananjaser1211
Source Code: https://github.com/sp4rt4c/kraken_7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 2020-03-31
Created 2020-03-30
Last Updated 2020-03-30
Please link.

Reaper Treble A64 Custom Vendor

Reaper Treble V2.3
This is a vendor for G610X based on Galaxy J6 February security patch.
How to install:
• Flash Create Vendor 2.0 from @anan1211's Spaget project if you haven't already.
• Download Reaper treble zip.
• Download ARM32_Binder64-A-only GSI ( simply A64-A-only ) of your choice which fits in your system partition (EvoX works)
• Extract *.img file from the downloaded GSI.
• Reboot to recovery and wipe system, vendor, data and caches.
• Flash ReaperTreble and GSI or the otherway around.
• Flash Gapps ARM32(optional)
• Reboot and enjoy!
Changelog:-
• Changed WiFi drivers and configs.
• Updated Memory Controller.
• Updated Kernel to Kraken Kernel RC-14.
Bugs:-
• Hardware keys (back,home and recents) doesnot seem to work. Will be fixed soon hopefully. (Fixed)
• Offline charging in Q GSIs
• Stretched Camera in 4:3 ratio and in tg. Messenger camera works fine tho.
• You tell us.
Only for G610X at the moment. Next update will include J730X and J530X most likely.
Download v2.3: Link
Powered by Kraken Kernel!
PS:I've seen some folks going out and flashing ARM64 GSI and telling it doesn't boot. If you do anything out of instructions, no support.
By: @soulr344
Credits to: @therealmodder, @ananjaser1211, @SPARTANICUS, @DAvinash97 and all of my testers. Without you guys, this would be impossible.
XDA:DevDB Information
ReaperTreble A64, ROM for the Samsung Galaxy J7
Contributors
soulr344, therealmodder, ananjaser1211
Source Code: https://github.com/sp4rt4c/kraken_7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 2020-03-31
Created 2020-03-30
Last Updated 2020-03-30
Reserved
Reserved

Categories

Resources