i wasn't sure where to post, q&a or developers, but since this is a question i guess i'm in the right spot... so here's my problem, i flashed MIUI 2.3.16 on Samasung Galaxy s2, and it's all fine (exept a little bit laggy), but i noticed that i can customize everything except the font and the dialer, i customize everything through Themes, when i change the dialer or the font it says applied, but it's not... please help
Not sure about other flavours of Miui, but I tried Galnet Miui around a week & a half ago (pretty sure it was 2.3.16 or similar from memory) & themes weren't working at that stage. Not sure if this has been fixed yet & given they basically take China Miui & tweak it/add their bits & pieces to it I imagine China Miui (and probably other flavours of Miui) still have this problem with themes.
Ask in the forum/have a look at the changelog of the specific Miui version you're using to confirm, or ask in the MiuiV4 discussion thread on here (search for it).
---------- Post added at 08:02 PM ---------- Previous post was at 07:29 PM ----------
According to the GM 2.3.23 changelog (it says ICS I9000 changes, but I'd be surprised if they haven't made the changes to the I9100 version), they seem to have made some improvements so far as themes are concerned.
Maybe check with whichever version of Miui you are using, chances are their 2.3.23 weekly has also had themes fixed. I can't confirm themes are definitely working on GM tho, as I've ditched Miui for CM9 after they decided to use Samsung base and not AOSP as they had done with GB (they've taken the 'easy' route IMHO & their first few ICS builds were crap).
HELLO!
BEFORE we start.... This is not a post to ask what is the best rom, its basically asking what rom is on your phone?
I had a post similar to this on another forum, and people loved it, so its a question for you all.....
What are you running, when I mean running.....I mean Rom, Your Set Up (launcher, kernal etc)m what else makes your mobile special????
Worldwide we all use our phones differently, and this post is just to see what users set up your phone like
Is there a theme you use? a specific game? anything you wish to add :silly:
I'm using OP2 since last year September and running SkyDragon 4.0 (based on OOS 3.0. Beta community build). I have tried almost all roms currently there are in the forum(including Nougat roms), but none of them give me as good as battery life as this SD rom, except PA. However, PA has some bugs I can not live with.
BrokenOs + Boeffla kernel + Nova launcher + Arise Sound System
Official cm13, stock kernel with a few xposed modules. Nothing fancy for me.
Hunter's CM14 + Ben's 4.3 Kernel + Nova Launcher Prime + Substratum theme engine
I want to know which rom is best for daily usage in terms of battery and general performance..more concern on the battery though...if use along radon kernel which one is better??
Cm13
vote for aicp mm, slim rom or nx rom
i know this out of your option, but this roms are best rom for me in mm while N still not stable enough
Resurrection Radon. Have tried many roms, allways end back at the above. All round beast of a rom
I think the battery isn't the major thing to concern as we know that RR is based on CM so in term of battery life both of them seem don't have a big difference, and regarding to ur query which one is the best for daily driver? I would say RR cos you know CM13 abit outdated than RR also RR has much customization inside, and it may give the ROM a step further than CM. Moreover it will never good to ask a ppl without really trying the ROM urself. Just try it and fell it. Hahha
Sent from my Redmi Note 3 Pro using Tapatalk
I recommend you stay at CM13.
Even RR 5.7.4 with lastest unofficial build and it's newer than CM13 but there is a bug - Cannot find any button to turn the back light off in RR configuration.
CM13 + Radon kernel. Best choice ever.
I use Nexus Experience ROM + Radon Kernel. Best combo ever! Read my review here: http://www.usacircular.net/best-rom-for-redmi-note-3-pro/
So, i was searching for a rom to flash on my op3, but then i found this;
CarbonRom - Download Link
AosipRom - Download Link
thanks to @aniket.lamba
ps: lemme know if there is another hidden official roms for our cancro, i will update here :fingers-crossed:
Hi mate, have you tried any of those two? Which one you like better? Mind to do a brief run down of the features?
[BUG]
ROM - AOSiP 20170702
Device - Mi3 cancro
Gapps - none, microG (from NanoMod)
Root - SuperSU
Mods - Arise Magnum Opus
Issue - accessibility settings force closes. Tried on the vanilla rom before even rooting it.
---------- Post added at 07:43 AM ---------- Previous post was at 07:38 AM ----------
chiwawa10 said:
Hi mate, have you tried any of those two? Which one you like better? Mind to do a brief run down of the features?
Click to expand...
Click to collapse
AOSiP (20170702) is more stable as a daily driver currently. It has all the customization features of other standard ROMS (not RR). As usual, BT audio streaming does not work (?for me). I found a bug - accessibility options FC if you try to open it.
The kernel is from stock LineageOS and hence leaves very little parameters for tweaking out of the box.
Battery life is slightly better than the other ROMS I had used (confounding factor - use of microG instead of full blown Gapps). Performance is great - no lags or multitasking hitches anywhere (concurrent use of LSpeed).
ninjanmizuki said:
[BUG]
ROM - AOSiP 20170702
Device - Mi3 cancro
Gapps - none, microG (from NanoMod)
Root - SuperSU
Mods - Arise Magnum Opus
Issue - accessibility settings force closes. Tried on the vanilla rom before even rooting it.
---------- Post added at 07:43 AM ---------- Previous post was at 07:38 AM ----------
AOSiP (20170702) is more stable as a daily driver currently. It has all the customization features of other standard ROMS (not RR). As usual, BT audio streaming does not work (?for me). I found a bug - accessibility options FC if you try to open it.
The kernel is from stock LineageOS and hence leaves very little parameters for tweaking out of the box.
Battery life is slightly better than the other ROMS I had used (confounding factor - use of microG instead of full blown Gapps). Performance is great - no lags or multitasking hitches anywhere (concurrent use of LSpeed).
Click to expand...
Click to collapse
Thanks for the detailed input, mate. I have jump the gun and already installed AOSiP on my Mi3W. No doubt, it is a very stable rom and is suitable as a daily driver. Battery life is good too Enjoying it very much especially with the substratum theme engine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
UnicornHorn kernel is a v4.14 Linux stable based, trying to be upstreamed with AOSP Kernel Common , aiming to give a balance of performance to battery life.
Code:
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Supports:
- Any custom non CFW AOSP custom ROMs on Android 11 for AOSP
- Android 10 MIUI 11/12 for MIUI
Reporting bugs:
- If you want to report any bugs, please post a logcat and kernel log - I recommend syslog to give all the logs I need.
If this information is not provided, I cannot - and will not - help.
Features:
- CPU Masks and bi-cluster API support
- Disable and fix a lot of MTK debug spam
- Module for get current display framerate
- MTK modules builded
- O3 for clang and vDSO
- Overall improvement
- vDSO32 support
- Upstream to the latest Linux kernel 4.14 version available
Downloads:
Latest Release
All releases go under this format: UnicornHorn-[revision]_[codename]_[date]
Telegram Chat:
UnicornHorn kernel chat
Flashing Instructions:
- Be sure to be rooted before flashing this kernel
- Reboot to latest non CFW recovery, flash this kernel and reboot
Credits and thanks:
@m_vaisakh for cleaning MTK debugging
@Agent_fabulous for his kernel base
And everyone else that helped me and worked with me on the kernel! PM me if I missed anyone
Contributors:
TheMalachite
Source Code:
UnicornHorn Kernel github
Version Information:
Kernel version Linux 4.14.236
UnicornHorn Version R9
Kernel Compiler Google Clang 9.0.3
Based On AOSP Kernel Common
ROM Firmware Required: Any non CFW AOSP rom based on MIUI 12 for AOSP build and Android 10 MIUI 11/12 for MIUI build
Status: Stable
Created 2020-04-08
Last Updated 2021-06-11
Reserved #1
Reserved #2
Done flashing it.
Any bugs?
work normally miui?
[email protected] said:
work normally miui?
Click to expand...
Click to collapse
No, currently it only supports custom AOSPs, read the thread carefully
What the hell???
I just followed the instructions for this kernel an now my cell is hard bricked.
I just got havoc gsi working on it.
This kernel instantly hard bricked my RN8P?
What the hell is the point of making a kernel that does that??
Seriously dude??
---------- Post added at 10:25 AM ---------- Previous post was at 10:15 AM ----------
There is no working android 10 for this phone? I flashed android 9 HavocOS 2.9.
Why would you release a kernel for a rom that is not yet working properly.
Are you trying to hard brick peoples RN8P's.
Please let everyone know who trys it that if they are running any form of android 9 an try this Kernel they will get an instant hard brick.
PLEASE.
I should be able to unbrick it with SPflash tools once I figure out how to use them.
This Kernel is very dangerous an needs to used with extreme care.
Bryceicle1971 said:
I just followed the instructions for this kernel an now my cell is hard bricked.
I just got havoc gsi working on it.
This kernel instantly hard bricked my RN8P?
What the hell is the point of making a kernel that does that??
Seriously dude??
---------- Post added at 10:25 AM ---------- Previous post was at 10:15 AM ----------
There is no working android 10 for this phone? I flashed android 9 HavocOS 2.9.
Why would you release a kernel for a rom that is not yet working properly.
Are you trying to hard brick peoples RN8P's.
Please let everyone know who trys it that if they are running any form of android 9 an try this Kernel they will get an instant hard brick.
PLEASE.
I should be able to unbrick it with SPflash tools once I figure out how to use them.
This Kernel is very dangerous an needs to used with extreme care.
Click to expand...
Click to collapse
Did you follow the instruction?
---------- Post added at 12:43 PM ---------- Previous post was at 12:42 PM ----------
Bryceicle1971 said:
I just followed the instructions for this kernel an now my cell is hard bricked.
I just got havoc gsi working on it.
This kernel instantly hard bricked my RN8P?
What the hell is the point of making a kernel that does that??
Seriously dude??
---------- Post added at 10:25 AM ---------- Previous post was at 10:15 AM ----------
There is no working android 10 for this phone? I flashed android 9 HavocOS 2.9.
Why would you release a kernel for a rom that is not yet working properly.
Are you trying to hard brick peoples RN8P's.
Please let everyone know who trys it that if they are running any form of android 9 an try this Kernel they will get an instant hard brick.
PLEASE.
I should be able to unbrick it with SPflash tools once I figure out how to use them.
This Kernel is very dangerous an needs to used with extreme care.[/QUO
SUPPORT ONLY AOSP CUSTOM ROM.
Click to expand...
Click to collapse
Yes Havoc is AOSP. However even though this cellphone (RN8P) has miui 11. its android 9. There is no working android 10 for RN8P.
So why did you write this kernel for an android version that does not yet work/exist with this cellphone?
I am unable to unbrick my unit with miflashpro or SP flash tools?
Bryceicle1971 said:
Yes Havoc is AOSP. However even though this cellphone (RN8P) has miui 11. its android 9. There is no working android 10 for RN8P.
So why did you write this kernel for an android version that does not yet work/exist with this cellphone?
I am unable to unbrick my unit with miflashpro or SP flash tools?
Click to expand...
Click to collapse
-Non-compatible ROMs with icecream kernel:
Stock Android 9 miui 10
Stock Android 9 miui 11
Stock Android 10 miui 11
-Compatible ROMs with icecream kernel:
AOSP based Android 10 custom ROMs (Los, posp, etc.)
All the aforementioned ROMs exist. This kernel was written though only for AOSP based Android 10 custom roms, as of today.
polfrank said:
-Non-compatible ROMs with icecream kernel:
Stock Android 9 miui 10
Stock Android 9 miui 11
Stock Android 10 miui 11
-Compatible ROMs with icecream kernel:
AOSP based Android 10 custom ROMs (Los, posp, etc.)
All the aforementioned ROMs exist. This kernel was written though only for AOSP based Android 10 custom roms, as of today.
Click to expand...
Click to collapse
Android 10 is virtually impossible to flash on RN8P. So I dissagree, Whenever I flash supposedly android 10 roms on it they turn out to be android 9.
all miui 11 for this cellphone is android 9.
The point is.
Anyone using yout kernel on a RN8P has a 99% chance of a hard brick like I now have as almost every rom version MIUI or AOSP is android 9.
That is not made very clear in your instructions which I misread
Bryceicle1971 said:
Android 10 is virtually impossible to flash on RN8P. So I dissagree, Whenever I flash supposedly android 10 roms on it they turn out to be android 9.
all miui 11 for this cellphone is android 9.
The point is.
Anyone using yout kernel on a RN8P has a 99% chance of a hard brick like I now have as almost every rom version MIUI or AOSP is android 9.
That is not made very clear in your instructions which I misread
Click to expand...
Click to collapse
I personally have been using Android 10 MIUI 11 a long time now. Without problems or bricks.
Right now I am using the Android 10 based LOS17.1.
I think you should reconsider regarding Android 10 on RN8P. Anyway, we're getting off topic. If you need help flashing Android 10, you can gladly pm me.
Bryceicle1971 said:
I just followed the instructions for this kernel an now my cell is hard bricked.
I just got havoc gsi working on it.
This kernel instantly hard bricked my RN8P?
What the hell is the point of making a kernel that does that??
Seriously dude??
---------- Post added at 10:25 AM ---------- Previous post was at 10:15 AM ----------
There is no working android 10 for this phone? I flashed android 9 HavocOS 2.9.
Why would you release a kernel for a rom that is not yet working properly.
Are you trying to hard brick peoples RN8P's.
Please let everyone know who trys it that if they are running any form of android 9 an try this Kernel they will get an instant hard brick.
PLEASE.
I should be able to unbrick it with SPflash tools once I figure out how to use them.
This Kernel is very dangerous an needs to used with extreme care.
Click to expand...
Click to collapse
First, their Android 10 aosp roms for this phone and read op also, this kernel is only compatible with AOSP Android 10 roms so before say it's my fault you should read op first ;__;
And did I say this kernel is compatible with GSI ? I think no ;__;
So don't try to boycott my work because YOU didn't read carefully op ;__;
Bryceicle1971 said:
Yes Havoc is AOSP. However even though this cellphone (RN8P) has miui 11. its android 9. There is no working android 10 for RN8P.
So why did you write this kernel for an android version that does not yet work/exist with this cellphone?
I am unable to unbrick my unit with miflashpro or SP flash tools?
Click to expand...
Click to collapse
A GSI will not work with a custom kernel, unless you install a compatible dtbo image. This is because a GSI has not modified your boot and dtbo partition. All AOSP based ROMs (again, not GSIs) have the same kernel dtb and dtbo image at this point. If you try to run the compiled kernel against newer MIUI dtbo images, you will hard brick.
The only MIUI dtbo images I've found working with the compiled kernel are from the initial MIUI 10 Android 9 builds. Consider using the factory preloader, and reading the thread properly.
MTK not for me
polfrank said:
I personally have been using Android 10 MIUI 11 a long time now. Without problems or bricks.
Right now I am using the Android 10 based LOS17.1.
I think you should reconsider regarding Android 10 on RN8P. Anyway, we're getting off topic. If you need help flashing Android 10, you can gladly pm me.
Click to expand...
Click to collapse
Thanks I might do that. But Im pretty sure the cell is unfixable now without either a service center or ERP surgery. Its not following any of the rules for hard bricks.
The only way the computer seems to respond to it is if I hold all 3 buttons down. Then I get an error an a chain of numbers an letters an an 'error' message.
Ill apologise to the developer. I misread the instructions an it was late at night. I kind of went off at him lol.
I definitely think if I can fix it Ill give it away or sell it. The MTK processor is a funny beast. Ive never had a processor that needs an authorised account to fix?
I'm going back to snapdragon I think. Its more predictable an more forgiving when you make errors
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
Agent_fabulous said:
A GSI will not work with a custom kernel, unless you install a compatible dtbo image. This is because a GSI has not modified your boot and dtbo partition. All AOSP based ROMs (again, not GSIs) have the same kernel dtb and dtbo image at this point. If you try to run the compiled kernel against newer MIUI dtbo images, you will hard brick.
The only MIUI dtbo images I've found working with the compiled kernel are from the initial MIUI 10 Android 9 builds. Consider using the factory preloader, and reading the thread properly.
Click to expand...
Click to collapse
Hey just wanted to apologise for losing my temper at you. It was late at night an was the last thing I expeted would happen.
I think ill give it away if I can get it fixed.
MTK is not for me. Too unforgiving an wierd behaviour when it bricks if you make a simple mistake.
I still doubt the existence of android 10 for RN8P mate every time I think I installed it turned out to be android 9.
There are tons of youtubers seeking click bate over it. Promising android 10 wen it says in version 11.0.6.0 global that its android 9 in the version info.
This was my %$#@ up not yours ok.
Just frustrating :-|
Bryceicle1971 said:
Hey just wanted to apologise for losing my temper at you. It was late at night an was the last thing I expeted would happen.
I think ill give it away if I can get it fixed.
MTK is not for me. Too unforgiving an wierd behaviour when it bricks if you make a simple mistake.
I still doubt the existence of android 10 for RN8P mate every time I think I installed it turned out to be android 9.
There are tons of youtubers seeking click bate over it. Promising android 10 wen it says in version 11.0.6.0 global that its android 9 in the version info.
This was my %$#@ up not yours ok.
Just frustrating :-|
Click to expand...
Click to collapse
No worries and, yes there is Android 10 MIUI 11 for the device. Here are the archives we're using as reference for development:
Global
Indonesian
Indian
EEA (EU)
Russian
For more information and support of flashing these, you might wanna join the Telegram groups, or ask in relevant threads Let's not bloat this thread any further regarding A10 firmware.
Bryceicle1971 said:
Yes Havoc is AOSP. However even though this cellphone (RN8P) has miui 11. its android 9. There is no working android 10 for RN8P.
So why did you write this kernel for an android version that does not yet work/exist with this cellphone?
I am unable to unbrick my unit with miflashpro or SP flash tools?
Click to expand...
Click to collapse
Not going to lie, but all this sounds like you've been living under a rock for at least 3 months.
All jokes aside, please see the ROM section of this forum. There's five working Android 10 AOSP ROMs out for this device since about 2 months. Which is why this Kernel was released. You DID NOT have to flash GSI at all.
I've tried this kernel on the previous build of EvolutionX and LineageOS. The current version of EvoX also comes with IceCream Kernel by default.
Good luck on unbricking your phone. And hopefully you flash a REAL ROM on it next time ?
Helhound0 said:
Not going to lie, but all this sounds like you've been living under a rock for at least 3 months.
All jokes aside, please see the ROM section of this forum. There's five working Android 10 AOSP ROMs out for this device since about 2 months. Which is why this Kernel was released. You DID NOT have to flash GSI at all.
I've tried this kernel on the previous build of EvolutionX and LineageOS. The current version of EvoX also comes with IceCream Kernel by default.
Good luck on unbricking your phone. And hopefully you flash a REAL ROM on it next time ?
Click to expand...
Click to collapse
Hard brick was unresolvable. EDL reset points had no success. Its in the rubbish bin now. I dont get MTk mediatek has different rules an I'm used to snapdragon. I am thinking of stepping down to Redmi note 8 as it is snapdragon an has a number of roms that are bugless an work very well. Even finger print unlock an faceunlock.
I made mistakes yes. But am not used to mediatek.
And yes I failed once again to understand that Miui releases numbers are not sequential.
11.0.6.0 = android 9
11.0.2.0 = android 10
Miui releases are not released sequentially. Fools me every time. That was the rock I was under 3 months lol.
I have never to my knowlwdge tried a mediatek cellphone before. Too hard for me.
polfrank said:
I personally have been using Android 10 MIUI 11 a long time now. Without problems or bricks.
Right now I am using the Android 10 based LOS17.1.
I think you should reconsider regarding Android 10 on RN8P. Anyway, we're getting off topic. If you need help flashing Android 10, you can gladly pm me.
Click to expand...
Click to collapse
can i get your help?
i want to flash twrp on my begonia, currently unlocked bootloader, Android 10 Indonesia.
please help. :highfive: