Just what it says it does. My only problem with the Wear24 was keeping the screen on while debugging or charging. This app fixes that problem.
The latest update adds support to change screen brightness while charging. Make sure you grant settings permissions when it asks.
https://play.google.com/store/apps/details?id=com.turndapage.watchwake
joelphilippage said:
Just what it says it does. This may only be a problem with Wear24, but turning on keep screen on while debugging does not keep the back-light on. This app fixes that problem.
https://play.google.com/store/apps/details?id=com.turndapage.watchwake
Click to expand...
Click to collapse
Your is a great simple app. I just wish I could set it a dim level for it. The watch is a little bright for me at night
Sent from my Pixel 2 XL using Tapatalk
Flexia32 said:
Your is a great simple app. I just wish I could set it a dim level for it. The watch is a little bright for me at night
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Hi Flexia,
The latest release adds support for setting screen brightness while charging. Make sure you grant the app settings permission when it asks.
Thanks!
Will give it a try tonight, thank you for making this app! :good:
joelphilippage said:
Hi Flexia,
The latest release adds support for setting screen brightness while charging. Make sure you grant the app settings permission when it asks.
Thanks!
Click to expand...
Click to collapse
Thanks!! This is the only app that sets my Huawei Watch's brightness lower than system setting.
Is it possible to set ambient brightness lower also?
lentm said:
Thanks!! This is the only app that sets my Huawei Watch's brightness lower than system setting.
Is it possible to set ambient brightness lower also?
Click to expand...
Click to collapse
This changes both modes on the Wear24. I believe there is no way to manually trigger ambient mode, so I don't think I can do much with that. Does the Huawei watch have separate brightness settings? I may get out my Moto360 sport and see how it works on that.
joelphilippage said:
This changes both modes on the Wear24. I believe there is no way to manually trigger ambient mode, so I don't think I can do much with that. Does the Huawei watch have separate brightness settings? I may get out my Moto360 sport and see how it works on that.
Click to expand...
Click to collapse
If I'm correct, there is no option to set ambient mode brightness on Huawei Watch, and it's way too bright in my opinion...
Thanks for this. I use Google Pay so I'm required to use a lockscreen on my watch. Debugging apps over cable was a nightmare with constant turning of a screen and unlocking.
I only enabled Screen on while Debugging at first, but the screen won't turn off at all while the app is installed. ADB Debugging is off. Also, when Change Brightness is enabled, it changes the brightness when charging, but then does not set the brightness back to whatever it was after taking it off the charger.
Verizon Wear24
Wear OS 2.10
yochananmarqos said:
I only enabled Screen on while Debugging at first, but the screen won't turn off at all while the app is installed. ADB Debugging is off. Also, when Change Brightness is enabled, it changes the brightness when charging, but then does not set the brightness back to whatever it was after taking it off the charger.
Verizon Wear24
Wear OS 2.10
Click to expand...
Click to collapse
Hey,
The debugging just checks to see if ADB is enabled using:
https://developer.android.com/reference/android/provider/Settings.Global.html#ADB_ENABLED
To stop this behavior, you have to go into the developer settings and turn adb off or swipe away the locked on notification. I'd be welcome to change this if you know of a way to check if an Android device is actively being debugged.
I am not able to replicate the issue with the brightness being reset. I would suggest swiping away the notification if it is active before charging, then adjusting the brightness and placing it on the charger again to see if this fixes it.
Also, the charge functionality will not work on Android 8 devices since background services are not allowed to be started from a receiver like charging. I'd also change this if there is another way.
joelphilippage said:
Hey,
The debugging just checks to see if ADB is enabled using:
https://developer.android.com/reference/android/provider/Settings.Global.html#ADB_ENABLED
To stop this behavior, you have to go into the developer settings and turn adb off or swipe away the locked on notification. I'd be welcome to change this if you know of a way to check if an Android device is actively being debugged.
I am not able to replicate the issue with the brightness being reset. I would suggest swiping away the notification if it is active before charging, then adjusting the brightness and placing it on the charger again to see if this fixes it.
Also, the charge functionality will not work on Android 8 devices since background services are not allowed to be started from a receiver like charging. I'd also change this if there is another way.
Click to expand...
Click to collapse
I think I missed that the notification was present. Sorry for the false alarm.
Thank you guys
Thank you
joelphilippage said:
The latest update adds support to change screen brightness while charging. Make sure you grant settings permissions when it asks.
https://play.google.com/store/apps/details?id=com.turndapage.watchwake
Click to expand...
Click to collapse
Play Market don't allow me to install your app - just say I don't have compatible devices. Other Android Wear apps installed fine so I think it can't install because of country restrictions. I am live in Russia, please give access to install your app.
MATPOC said:
Play Market don't allow me to install your app - just say I don't have compatible devices. Other Android Wear apps installed fine so I think it can't install because of country restrictions. I am live in Russia, please give access to install your app.
Click to expand...
Click to collapse
I'm not using any restrictions based on country or device. What device are you trying to install it on? Have you searched for the app on the playstore on your watch?
joelphilippage said:
I'm not using any restrictions based on country or device. What device are you trying to install it on? Have you searched for the app on the playstore on your watch?
Click to expand...
Click to collapse
I tried to install it on Sony Xperia Z5 Premium Dual Phone and Sony Xperia Z4 Tablet. I don't upgraded my Wear24 to Wear OS 2.0 and I cant find Play Store in apps of watches. When I am searching WatchWake on phone or tablet it can't be found but it available to search in browser but can't be install because of incompatible. Other Wear OS apps I installed to phone and after that it was installed to Wear24 by Wear OS app from phone.
MATPOC said:
I tried to install it on Sony Xperia Z5 Premium Dual Phone and Sony Xperia Z4 Tablet. I don't upgraded my Wear24 to Wear OS 2.0 and I cant find Play Store in apps of watches. When I am searching WatchWake on phone or tablet it can't be found but it available to search in browser but can't be install because of incompatible. Other Wear OS apps I installed to phone and after that it was installed to Wear24 by Wear OS app from phone.
Click to expand...
Click to collapse
Since you haven't updated your Wear24 to 2.0, it will not appear on the play store. I decided not to support Wear 1 on the play store as this requires a mobile app and usually leads to lots of bad reviews from users who install it on their phone and don't see the app and the new method only works half the time which also causes bad reviews. The app should support the watch, but you will have to sideload it. search for "Watchwake apk" and you should be able to find it.
joelphilippage said:
Since you haven't updated your Wear24 to 2.0, it will not appear on the play store. The app should support the watch, but you will have to sideload it. search for "Watchwake apk" and you should be able to find it.
Click to expand...
Click to collapse
ОК, I got it. I had а problems with upgrade and successfully upgraded after third attempt. Now I opened Play Market from Wear24 and found and installed your app. Thank you!
MATPOC said:
ОК, I got it. I had а problems with upgrade and successfully upgraded after third attempt. Now I opened Play Market from Wear24 and found and installed your app. Thank you!
Click to expand...
Click to collapse
Glad you got it working! Keep in mind leaving the app running may cause burn-in on the Wear24 so I would suggest not leaving it on for long periods of time.
Flexia32 said:
Your is a great simple app. I just wish I could set it a dim level for it. The watch is a little bright for me at night
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
You can with AutoWear. The Brightness setting accepts values between 0 - 255. At night I set it to 51 (watch brightness level 1) and 204 during the day (watch brightness level 3).
joelphilippage said:
This changes both modes on the Wear24. I believe there is no way to manually trigger ambient mode, so I don't think I can do much with that. Does the Huawei watch have separate brightness settings? I may get out my Moto360 sport and see how it works on that.
Click to expand...
Click to collapse
On my Wear24, this app works to reduce the brightness of the default blue charging display, but not the actual Ambient mode, which can in fact be triggered manually - after dismissing the default display, just smoosh your palm on the whole screen! (this still works while it's on the charger) - Doing that turns the brightness back up.
Would there be any way to detect when I do it while it's charging and turn the brightness back down where I set it?
Related
is it just me perhaps,but i find my z2 tablet very bright,ive got it set on auto,.im interested in other peoples thoughts and if you find the same problem ,what were yoiur fixes,if any.cheers john
Er... simply turn off auto brightness and set it manually??
With root, you can install the Xposed module "Gravity Box", it contains an option to alter the brightness via swiping along the status bar (like on Galaxy phones).
hasenbein1966 said:
Er... simply turn off auto brightness and set it manually??
With root, you can install the Xposed module "Gravity Box", it contains an option to alter the brightness via swiping along the status bar (like on Galaxy phones).
Click to expand...
Click to collapse
Even on the lowest manual brightness it's rather bright. Brighter than many other tablets and because of it not as comfortable to use at night.
Quipeace said:
Even on the lowest manual brightness it's rather bright. Brighter than many other tablets and because of it not as comfortable to use at night.
Click to expand...
Click to collapse
The only solution I have found for this is to use an app called screen filter. It works and you can find it on play store.
Screen filter is not so good.
Take ScreenDim. That app is not working via color tricks, but really turns the backlight down.
Is available in test version, full version and root version (RootDim).
Hi
I have several questions :
1. I already experienced that the night clock doesn't appear instantly when you put the watch onto the charger. Sometimes it takes a time till it appears.
2. What about screen burn from the night clock? I read about it in the forum for the first gen moto 360. Is it still a issue with the 2nd Gen 360?
3. There are wear developer options in the developer options. And there is the option "burn-in protection" (I hope it's called that way in English, I've got it on German) but it won't activate even after reboot as it tells me to do.
XxM4tzexX said:
Hi
I have several questions :
1. I already experienced that the night clock doesn't appear instantly when you put the watch onto the charger. Sometimes it takes a time till it appears.
2. What about screen burn from the night clock? I read about it in the forum for the first gen moto 360. Is it still a issue with the 2nd Gen 360?
3. There are wear developer options in the developer options. And there is the option "burn-in protection" (I hope it's called that way in English, I've got it on German) but it won't activate even after reboot as it tells me to do.
Click to expand...
Click to collapse
I disable the night clock by turning on theater mode (double click the side button). But I do this because it seems to fix the heart rate monitor from tracking the apparent 100BPM of the charger lol.
I use the Slumber app that automatically turns the screen off as soon as you place the watch on the charger.
I don't think there will be any burn in issue, since Moto360v2 have LCD screen. Burn-in have place on OLED screens only (Huawei Watch for example) since they have organic diods which degrade over time. LCD don't have this issue at all because they have one backlit light for all pixels and 'rotating' pixels. With LCD screens nothing is affected by the picture on the screen (technically). With OLED screens each pixel emits light on its own, therefore degradation of pixels is dependant on the picture on the screen (whether this particular pixel emits the light most time or not) = burn in.
Therefore night mode on Moto360 can be used safely for as long as you wish.
morpheusgt said:
I use the Slumber app that automatically turns the screen off as soon as you place the watch on the charger.
Click to expand...
Click to collapse
Hola
I tried this slumber app but it did not turn my screen off during charging. Yes, I did launch the app from the watch and ensured that it was enabled.
Am I missing something?
Thanks.
"So what you want me to do 'bout that?"
QAM said:
Hola
I tried this slumber app but it did not turn my screen off during charging. Yes, I did launch the app from the watch and ensured that it was enabled.
Am I missing something?
Thanks.
"So what you want me to do 'bout that?"
Click to expand...
Click to collapse
The button to enable/disable Slumber wasn't very intuitive to me. I actually disabled it when I wanted to enable it, so you may have the same problem. Try toggling the setting the other way around.
also, incase anyone noticed, slumber only puts a black overlay on top of the clock. the screen is still lit up at night, but it's black. incredibly stupid on Motorola to not let us shut off the screen.
Sent from my Moto X Pure Edition
Yes there is a problem and a big one... my watch with less than 5 months old are all burned now
Stupid setting just kill the watch
shaneledford said:
I disable the night clock by turning on theater mode (double click the side button). But I do this because it seems to fix the heart rate monitor from tracking the apparent 100BPM of the charger lol.
Click to expand...
Click to collapse
That's the answer. Why is anyone doing anything else?
Sent from my Nexus 5X using XDA-Developers mobile app
bobby janow said:
That's the answer. Why is anyone doing anything else?
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
Because this no longer works since one of the updates
shaneledford said:
Because this no longer works since one of the updates
Click to expand...
Click to collapse
The most recent updates fixed it. I use it every night.
Kinsman-UK said:
The most recent updates fixed it. I use it every night.
Click to expand...
Click to collapse
Correct. It was the one before the last one. Every night here too.
Sent from my Nexus 5X using XDA-Developers mobile app
I put my watch in Theater mode (swipe down from the top, then swipe left) and the face stays off until I remove the watch from the charger and press the button to wake it.
I've noticed that no matter what setting I have it on, my tablet (M5 8.4) automatically lowers the screen brightness in Chrome and YouTube, but more noticeably in Chrome.
Any way to disable this?
Have you checked the setting menus?
Using Firefox might be a solution.
Also, Youtube in FF has background playback as long as you are using a desktop user agent.
thref23 said:
Have you checked the setting menus?
Using Firefox might be a solution.
Also, Youtube in FF has background playback as long as you are using a desktop user agent.
Click to expand...
Click to collapse
I've checked every possible setting, and read online everywhere, but to no avail. It also dims in Firefox. It dims as soon as you go into the app. After an online search, I found many Huawei owners with EMUI 8.0 having this issue. There is one solution, but it requires root and I don't want to root my device after having it for a few hours.
Funny. Would love a solution as well as this is rather annoying
Do you guys have auto brightness turned on or off?
I never really experienced this issue, but I did observe strange brightness behavior before I began to keep auto brightness permanently enabled.
Doing a quick search, I saw one person say to turn auto brightness on, I saw one person say to make sure animations aren't disabled in dev options, some say unclick 'increase readability in sunlight' in dev options. I personally wonder if the stock launcher (which I don't use) maybe is set to override the brightness level.
thref23 said:
Do you guys have auto brightness turned on or off?
I never really experienced this issue, but I did observe strange brightness behavior before I began to keep auto brightness permanently enabled.
Doing a quick search, I saw one person say to turn auto brightness on, I saw one person say to make sure animations aren't disabled in dev options, some say unclick 'increase readability in sunlight' in dev options. I personally wonder if the stock launcher (which I don't use) maybe is set to override the brightness level.
Click to expand...
Click to collapse
I somehow doubt that. I am using Nova Pro and am experiencing some weird behavior when attached to the Keyboard ... (the dimming function mentioned here is, what I believe, the erroneous function, as it works quite nice when not attached to the keyboard ...
All "your" suggestions do not work - I find this "function" somewhat annoying, even without the keyboard-thing ...
There is one solution, but it requires root and I don't want to root my device after having it for a few hours.
Click to expand...
Click to collapse
may I get a link for the root-solution? I'd like to have a look at it ...
SO I forgot to mention: M5 Pro!
kev1807 said:
I somehow doubt that. I am using Nova Pro and am experiencing some weird behavior when attached to the Keyboard ... (the dimming function mentioned here is, what I believe, the erroneous function, as it works quite nice when not attached to the keyboard ...
All "your" suggestions do not work - I find this "function" somewhat annoying, even without the keyboard-thing ...
may I get a link for the root-solution? I'd like to have a look at it ...
SO I forgot to mention: M5 Pro!
Click to expand...
Click to collapse
Well, I went through with it and rooted it. I tried the fix, and... it worked! After you're rooted, simply freeze the system process (I used Titanium Backup) called PowerGenius, reboot and no more forced-auto brightness dimming.
xKevin said:
Well, I went through with it and rooted it. I tried the fix, and... it worked! After you're rooted, simply freeze the system process (I used Titanium Backup) called PowerGenius, reboot and no more forced-auto brightness dimming.
Click to expand...
Click to collapse
hmhm. I was quite sure it was a System process - since the "bug" (dunno whether you read the thread on keyboard and brightness ...) appears with the system-icon when in Desktop-Mode ...
Great. there is a fix for this. now I need a non-root fix ... :-/
Yes, try the app ilux. Let that control brightness.
Steffe89 said:
Yes, try the app ilux. Let that control brightness.
Click to expand...
Click to collapse
Do you have a link to this app? I can't seem to find anything relevant when searching for ilux.
Just disable "power genius" this has worked for me. without root. No More auto dimming.
Disabling Power Genius will also get rid of issues involving bluetooth music playback, and will prevent apps like Google Maps from getting killed off semi-aggressively in the background (i.e. so when you map out driving directions you won't have to reenter the address as you get close to your destination).
Quick note: you have to reboot after disabling Power Genius. Merely disabling it won't immediately change anything.
Up until now I thought a reboot would bring the "wonderful" feature back ...
How comes that you mention a reboot is needed?
How do you disable it? I can only do a force stop
I'm not sure how to disable it without root (I imagine adb might work). With root, most use Titanium Backup to freeze it. I'm using Service Disabler to disable the associated services instead. Service Disabler is awesome if you are rooted, underrated app and great for EMUI because, for example, you can disable individual parts of the Tablet Manager app without breaking the features you want.
You might not need to reboot. When I initially froze it using Xposed Edge Pro, but didn't reboot, it didn't change anything for me. Could have been due to Xposed Edge Pro.
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/
scott.eden said:
Just disable "power genius" this has worked for me. without root. No More auto dimming.
Click to expand...
Click to collapse
Was there any negative outcome from disabling power genius?
krisu253 said:
Was there any negative outcome from disabling power genius?
Click to expand...
Click to collapse
None for me.
thref23 said:
Disabling Power Genius will also get rid of issues involving bluetooth music playback, and will prevent apps like Google Maps from getting killed off semi-aggressively in the background (i.e. so when you map out driving directions you won't have to reenter the address as you get close to your destination).
Quick note: you have to reboot after disabling Power Genius. Merely disabling it won't immediately change anything.
Click to expand...
Click to collapse
I cannot find Power Genius?
I can confirm following the above article will allow you to remove the power genius package from the Mediapad M5 8.4 on EUMI 9.1 without root.
Thank you sooooo much... You can't believe how annoying this was. No need to even reboot either and it doesn't return if you do.
Now I just need a way to too keep the custom 740DPI after reboot and this tablet will be perfect
100% Free - 100% GPLv3 Open Sauce - No ads - No tracking - No nags - Optional donation
Holey Light is a LED emulation app. It animates the edges of the camera cut-out (AKA punch-hole) as replacement for the sadly missing LED on many modern devices.
Additionally, it provides a notification display for when the screen is "off", replacing - or working in conjunction with - the Always-On Display feature. As this display is not around the camera hole, it is aptly named the Unholey Light.
Supports all Samsung devices with in-screen camera hole, and several Google Pixels.
Features
Emulates notification LED
Four different display modes: Swirl, Blink, Pie, Unholey Light
Configurable animation size, position, and speed
Customizable color for each notification channel
Selects initial notification color by analyzing dominant color of app icon
Displays during screen "off", sub-1% battery use per hour in Unholey Light mode
Separate configuration modes for different power and screen states
Ability to mark notifications as seen based on various triggers
Respects Do-Not-Disturb and AOD schedules
Can hide AOD completely, partially, and/or keep the clock visible
Additional AOD Helper package for further battery usage reduction
All teh details and all teh sauce!
It's all on GitHub!
Download
You can grab it from Google Play.
Feedback
You can feedback here. Or in the GitHub issue tracker. Or talk to me on Telegram. I guarantee no response or fix.
The workings of the app are quite intricate, so describe what is happening in minute detail.
TODO
You can find the TODO list in the issue tracker.
Enjoy!
Or not.
Changelogs and release notes have been moved to GitHub
- also reserved -
Here we go. Another app I'll probably buy.
Just post the donate button now. ??
Nothing pops up on my S10+ after permission needed 2/4 (link device). Are there any logs i could provide? Is there any way to link it manually?
Seems not working for me - S10.
I tried it and received some push notifications from telegram, Outlook and WhatsApp, but no holey light (nice name btw).
F0rbidN said:
Nothing pops up on my S10+ after permission needed 2/4 (link device). Are there any logs i could provide? Is there any way to link it manually?
Click to expand...
Click to collapse
There's no selection dialog for a Wi-Fi network / Bluetooth device at all? Have you tried closing/reopening the app? Uninstalling/reinstalling it? Making sure Wi-Fi and Bluetooth are both on and you're connected to something?
I do not know how to link the device/companion app manually, no. Until I needed it to work around a bug in the notification system, I didn't even know it existed.
Jannomag said:
Seems not working for me - S10.
I tried it and received some push notifications from telegram, Outlook and WhatsApp, but no holey light (nice name btw).
Click to expand...
Click to collapse
Try un/reinstalling and rebooting.
I've seen others who use notification access comment it sometimes doesn't start, though I haven't encountered that behavior even once during testing.
Otherwise I don't know. Did you grant all the permissions? Did a device link pop up?
It could of course also be an internal crash. Check logcat.
Chainfire said:
There's no selection dialog for a Wi-Fi network / Bluetooth device at all? Have you tried closing/reopening the app? Uninstalling/reinstalling it? Making sure Wi-Fi and Bluetooth are both on and you're connected to something?
I do not know how to link the device/companion app manually, no. Until I needed it to work around a bug in the notification system, I didn't even know it existed.
Click to expand...
Click to collapse
Enabling Bluetooth fixed it, I didnt know it has something to do with it. Thank you for your work an quick help.
F0rbidN said:
Enabling Bluetooth fixed it, I didnt know it has something to do with it. Thank you for your work an quick help.
Click to expand...
Click to collapse
Neither did I, hah! It actually shows Wi-Fi networks for me too, and selecting one of those worked just as well during testing, so I didn't think it'd matter.
thanks master for your app.
I'm using s10+ exinos and i just want to report that's working.
my device is charging and notification is working fine, got an email for testing. i hope it will work if device is using battery power and screen keeps off if notification comes in.
additional info if it's important: I'm using fingerprint, face and pin security.
thanks again
m8980 said:
i hope it will work if device is using battery power and screen keeps off if notification comes in.
Click to expand...
Click to collapse
Hopefully soon, but I am quite busy with my day job at the moment, it may be a week or two!
Thanks!
Off screen show lights does not show.
i am charging my phone wirelessly and AOD is turned off.
on S10
Can't seem to get it running but I'm super excited about this. Maybe I need to ditch the Samsung edge Lighting
When I tried to perform permission needed 2/4 (link device), I cannot find any device name call "Holey Light" and I only can find the Bluetooth-enable device around me. Do I just need to choose one of them?
Chainfire said:
Try un/reinstalling and rebooting.
I've seen others who use notification access comment it sometimes doesn't start, though I haven't encountered that behavior even once during testing.
Otherwise I don't know. Did you grant all the permissions? Did a device link pop up?
It could of course also be an internal crash. Check logcat.
Click to expand...
Click to collapse
I found out that it's working for Gmail and Samsung's Stock Email app, even when locked.
WhatsApp works, but only when unlocked and only when status bar is visible (so not for full screen apps).
Does your app stops the phone from going into deep sleep?
hi,
what shall i need to do to step 2/4?
attached the image.
m8980 said:
thanks master for your app.
I'm using s10+ exinos and i just want to report that's working.
my device is charging and notification is working fine, got an email for testing. i hope it will work if device is using battery power and screen keeps off if notification comes in.
additional info if it's important: I'm using fingerprint, face and pin security.
thanks again
Click to expand...
Click to collapse
how did you passed step 2/4?
It's written in the description what to do. Link it to any Bluetooth or wifi nearby.
pigmich said:
When I tried to perform permission needed 2/4 (link device), I cannot find any device name call "Holey Light" and I only can find the Bluetooth-enable device around me. Do I just need to choose one of them?
Click to expand...
Click to collapse
Just pick something, it doesn't matter what.
Jannomag said:
I found out that it's working for Gmail and Samsung's Stock Email app, even when locked.
WhatsApp works, but only when unlocked and only when status bar is visible (so not for full screen apps).
Does your app stops the phone from going into deep sleep?
Click to expand...
Click to collapse
WhatsApp works fine for me, both locked and unlocked, so that's strange. What sort of full screen app did you test with? Might be Android hides the overlay when an app is fullscreen? Note it only works in portrait mode, there's no way to draw in the right place in landscape.
stefanz08 said:
hi,
what shall i need to do to step 2/4?
attached the image.
Click to expand...
Click to collapse
Just select something, doesn't matter what.
I turned off adaptive brightness, but while manual brightness is set to maximum I noticed the screen also increases/decreases brightness depending on the outdoor conditions. Sometimes seems it gets even brighter that max manual setting.
Anyone else experienced this?
Hi @mejgs
I too had this annoying issue. Apparently this is caused by an app called "Device Health Services". Disabling it solved the issue for me. Do give it a try & let us know your observation
I noticed it too. Did u experience any issue when disabling it? I am rooting, thinking of uninstalling it altogether. Google has some unwanted apps bundled with Android one.
paq1170 said:
I noticed it too. Did u experience any issue when disabling it? I am rooting, thinking of uninstalling it altogether. Google has some unwanted apps bundled with Android one.
Click to expand...
Click to collapse
I've uninstalled that app. No issues so far
I don't have that app, I'm having that issue too
lima002 said:
I don't have that app, I'm having that issue too
Click to expand...
Click to collapse
Look carefully. You are supposed to have that app pre-installed. The app package is named com.google.android.apps.turbo
Thanks All. Disabling DEVICE HEALTH SERVICES fixes the auto brightness issue.
evanB70 said:
Hi @mejgs
I too had this annoying issue. Apparently this is caused by an app called "Device Health Services". Disabling it solved the issue for me. Do give it a try & let us know your observation
Click to expand...
Click to collapse
Disabled it, still the same issue. So far tried:
- Turned off adaptive brightness, rebooted
- Turned off adaptive battery, rebooted
- Disabled Device Health check, rebooted
- A combination of above
Still nothing!
It's getting beyond irritating now. Everytime I need to read any message or do anything on the phone need to manually lower the brightness and increase it again. That normalizes it for a like half a minute and then goes dim again.
Same issue with my Mi A3 and adaptive auto brightness.
I keep adaptive brightness on all time and when I unlock directly with fingerprint sensor half of the times if not more phone wakes up with high brightness...and doesn't go down...slider is on the dark side and not showing the real brightness...and to change the brightness I have to move around the slider...
It is quite annoying..I disabled device health and seems slightly better but the bug is still there...am I the only one with this problem?
I don't think its a bug but rather a way for the optical in-display fingerprint to properly recognize our fingerprints.
airon11 said:
I keep adaptive brightness on all time and when I unlock directly with fingerprint sensor half of the times if not more phone wakes up with high brightness...and doesn't go down...slider is on the dark side and not showing the real brightness...and to change the brightness I have to move around the slider...
Click to expand...
Click to collapse
I had the same bug, december update fixed it on my device (EU)