OTT TV BOX A95X Amlogic S905W 2G/16G Original Factory Image/Recovery - Android Stick & Console AMLogic based Computers

OTT TV BOX A95X Amlogic S905W 2G/16G Original Factory Image/Recovery - Android Stick & Console AMLogic based Computers

I had this TV Box I'd bought from Wish. I thought I would share a (nearly) stock image. I pulled it after having to play around with the Google Play Store for a while because it ceased functioning.
I had noticed several other people having issues with obtaining a stock ROM, possibly on other forums.
https://1drv.ms/f/s!AtYTbQWzzbfRiBZEsUFK73q2H-pX

Thought it thru some more today and I'm adding a raw image of boot, bootloader and system. There may be more on this device that someone will find useful, if it's the case, let me know so I can dumped and post it.

File availability
Hi engineerchad
I am seeking the files you previously linked to, however they no longer appear available.
I'd be very grateful if you could make them available again please, if you do not mind?
Thank you
Andy

Link dead
engineerchad said:
Thought it thru some more today and I'm adding a raw image of boot, bootloader and system. There may be more on this device that someone will find useful, if it's the case, let me know so I can dumped and post it.
Click to expand...
Click to collapse
I am searching for this ROM but the link seems to be dead. Can you re-upload it?

abpdora said:
I am searching for this ROM but the link seems to be dead. Can you re-upload it?
Click to expand...
Click to collapse
I will go ahead and put it back up, give me a little bit seems like I lost the files on my online drive so I'll have to go ahead and either pull from a backup or take it off the device again. Check back later today or tomorrow and I should have a new link posted for you.

Onedrive:
https://1drv.ms/f/s!Am__eYU6nzsDgYMcl4D4gdMkAnLIuw
Mega:
https://mega.nz/#F!u8t3ECYS!HH8I-DPraAsc1CwMeTt-1Q
I hope it helps! I would post the link for the TWRP recovery that I used, but it was specifically stated to -please- not link up to it, reproduce, copy, re-upload, etc by the author. I located it with a Google search for "TWRP Amlogic S905W" or something of the like. It doesn't function perfectly (on my high-def TV, it displays on the top half of the screen, with the bottom half just kind of filled with garbage and you NEED a mouse hooked to the box to use it, but it's workable).

engineerchad said:
Onedrive:
https://1drv.ms/f/s!Am__eYU6nzsDgYMcl4D4gdMkAnLIuw
Mega:
https://mega.nz/#F!u8t3ECYS!HH8I-DPraAsc1CwMeTt-1Q
I hope it helps! I would post the link for the TWRP recovery that I used, but it was specifically stated to -please- not link up to it, reproduce, copy, re-upload, etc by the author. I located it with a Google search for "TWRP Amlogic S905W" or something of the like. It doesn't function perfectly (on my high-def TV, it displays on the top half of the screen, with the bottom half just kind of filled with garbage and you NEED a mouse hooked to the box to use it, but it's workable).
Click to expand...
Click to collapse
Pull original recovery and send me a link ill try porting a fully functional version

Ricky Divjakovski said:
Pull original recovery and send me a link ill try porting a fully functional version
Click to expand...
Click to collapse
It should show in both links "recovery.stock.img" is the filename.
The conventions of naming partitions on the box are quite simple /dev/block/system /dev/block/recovery /dev/block/boot etc (I believe. I actually haven't plugged this one in for a minute after I got a slight upgrade for it that I'm using now.) I had originally intended to do this myself, but have been trying for a long time to recover from the mental/physical effects of a quarter million dollar set of injuries last year and it's been pretty brutal.
I see where someone has done an unofficial TWRP in https://forum.xda-developers.com/android-stick--console-computers/amlogic/recovery-twrp-3-0-2-0-touch-recovery-t3454549 for this device with 8GB ROM, so I'm not sure if this would work just as well, or if it needs to be remade (this box is labelled as A95X and it's the amlogic s905x chipset with 2GB/16GB so I'm not sure if it would somehow be different from the link above or not.)

I figured I'd update, it seems like I may have misread the post originally on freaktab the author requested people share this link as opposed to mirroring. Here it is (had to search it up again, by coincidence it's also working for my a95x max + box which is also OTT TV brand I'll try to get an image up from that but my computer shows it has a root trojan in the stock image?)
http://konstakang.com/devices/nexbox_a95x/TWRP/

twrp complete backup
Hi Can you post a full backup with all partitions?
I have a a95x pro s905w too, and lost L1 widevine
Thanks for your support.
Best Regards from Spain

Here you have the last update.zip from the vendor:
A95X(905w2_16)_PRO-7.1.2-201806201412 2018062016101756843 zip
https://drive.google.com/file/d/1aSNU51sA3hm2bI-S1w7fz2l_jrmjD6Ks
try and see if it solve your problem

afaik, the OTT TV BOX stock firmware has a su included. There's just no SuperSU or other app to control access to it from what I've seen (and it's been pretty touchy while trying to install one, IME)

hi
i have A95X R1 Android 7.1 CPU Amlogic S905W 2.0GHz GPU Mali-450MP5 RAM 2G ROM 16G, anyone have a firmware or ROM for it pls??

is-serb said:
hi
i have A95X R1 Android 7.1 CPU Amlogic S905W 2.0GHz GPU Mali-450MP5 RAM 2G ROM 16G, anyone have a firmware or ROM for it pls??
Click to expand...
Click to collapse
seeking that same firmware ..

firmware
deetucks said:
seeking that same firmware ..
Click to expand...
Click to collapse
I have a95x 1g 8g and was at android 6 (this has 2 g 16g as well posted below)
Link posted is for ALL firmwares for the ott nexbox devices. Pretty sure some of you will need this. The listing does not say 7.1.2 but it is. It says 7 or 7.1 no worries. I got it, used it.
It is nexbox... so if you have the nexbox logo on your screen this is your stock 7.1.2 as I have just upgraded my box today.
You can use twrp, but do it from SD and never install it as you don't need to. Put twrp .img file NOT the zip with the blank update zip below. Never need to lose stock recovery.... I think. Not sure about custom roms yet but will lknow in an hour I'd say. Also included a zip of a program that will format your sd card fat32. I had a 64 gig card and windows won't make it fat32. Stupid.
As far as making the bootable sd card, I kept only getting 2 files when I ran the burn card maker you may have seen. That uboot one never was put in. Then by mistake I loaded the main img file after one completion. So not sure if you have to hit make twice or maybe because I used a 64 gig card. But with all 3 files there, I stuck in the sd card, nothing except hdmi plugged in.... held the reset button in and powered on..... got the android guy and a long update bar.......updated!
If you can put stock by SD card... do it! That other method via USB with USB burning tool app? If it works, yay. But I never got it working. That fat32 maker was very handy!
Link if you have nexbox:
https://mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ!4wpwzJyS
Has twrp but all crappy like mentioned earlier... pretty sure. But all firmware from 5 to 7 and I got 7 from there.

its not a nexbox..and its 2g 16g.. i cant find its stock rom anywhere,, the ds card thing does not work either ..i tried with numerous custom rom jus dont boot with the ds card,,

deetucks said:
its not a nexbox..and its 2g 16g.. i cant find its stock rom anywhere,, the ds card thing does not work either ..i tried with numerous custom rom jus dont boot with the ds card,,
Click to expand...
Click to collapse
That sucks. The link posted has 2 gig 16 gig. All firmwares... think my board is the same.
hmm.. think it is the same box. I will re-read your specs if you listed them
How did you get firmware to sd card, is it fat32 and only stock will work... so not sure but I think if you try from the link I posted, it won't screw you up? I think?

Ott tv box
model: R1
cpu: Amlogic s905w
ram: 2gb rom :16gb
[email protected]
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
i can always try ,, i definately will look into it and give a try,,

deetucks said:
Ott tv box
model: R1
cpu: Amlogic s905w
ram: 2gb rom :16gb
[email protected]
Click to expand...
Click to collapse
oh you got the w.....have you looked on freaktab? Some site I just discovered. There is a good chance you'll find it there or someone can help.
I just tried looking and there is almost nothing. Weird because I could have sworn I saw a lot of s905w when I first started this.. Now you got me looking.

trust me i,m on freaktab cant find nothing.. request help nothing so far..
---------- Post added at 12:08 PM ---------- Previous post was at 11:55 AM ----------
trust me i,m on freaktab cant find nothing.. request help nothing so far..

Related

[Q] Help with Cybernav Mini tablet. Cant flash firmware

Help needed. I turned off my chinese tablet (Cybernav Mini) and the next time I turned in on it showed: "Sorry! The process com.android.phone has stopped unexpectedly... Force Close. ". It shows up again, one after another. I press Force Close and then quickly another pops up, showing the same or a similar message.
I can't use the tablet as those messages block any other function of the tablet, i can turn it off by long press the power button or pressing the reset button but when it reboots, it happens all over again. Even after draining the battery for few days, when i boot it again, same problem happens. The problem is after i click on Force Close, it gives me another error too fast and i can't do anything like installing or use any app.
I contacted support and they sent me the last firmware for the device (YFPI08), but when I put the folder it in the external microSD card and power it on, it wont read it and instead it will go through the normal boot process and the Sorry! force close problem comes back again. I can't find a combination of pressing the two only hardware buttons it's got that could take me into some sort of rescue boot either.
I tried fastboot from my computer but it doesnt recognize the connected tablet.
I can't find any other way, as I am not too familiar with Android, and every solution seems to be very device specific oriented. So please, if there is a solution, I would appreciate your help.
Cheers

try rom
if u look on to my opinoin try out any custom rom

Shrihari007 said:
if u look on to my opinoin try out any custom rom
Click to expand...
Click to collapse
I doubt there is any custom rom for that tablet, nevertheless, if you know where I can find one, and how to do it, please, link me to the right place.
Also it is worth to mention that when this problem happened, I was playing with the Z4root app, so there is a possibility that I accidentally messed up with the rooting of the tablet. Would that make sense?
Cheers

45 reads no reply, someone must have at lest a simple suggestion, like bin the tablet or something, but I was told that here I was going to get some help in this forum. No one?
cheers

(Cybernav Mini II - PW08)
There are some firmware files on yinlips dot com website.
·YDPG18 Upgrade
· YDPG18 upgrade tool LiveSuit_v20
· A10 android2.3 (resistance screen)v4.24-20120531
· A10 Android4.0(resistance screen)-20120726
Can these be used on the cybernav mini 2?
The download is pretty slow, but have anyone tried them?

Me too..
Hello.. Do you still have this problem?. Even I had this problem.. They sent me the original firmware and I flashed it with my MMC card and then i inserted the card to the Cybernav Mini and pressed the reset button.. it flashed to the original firmware and now all fine.. do let me know if you want the original firmware for Cybernav Mini GPS tablet. :good:
regards

(Cybernav Mini II - PW08)
craigsoup said:
There are some firmware files on yinlips dot com website.
·YDPG18 Upgrade
· YDPG18 upgrade tool LiveSuit_v20
· A10 android2.3 (resistance screen)v4.24-20120531
· A10 Android4.0(resistance screen)-20120726
Can these be used on the cybernav mini 2?
The download is pretty slow, but have anyone tried them?
Click to expand...
Click to collapse
OK. Tested with the device using PhoenixCard img writer. The tablet boots up, but in safe-mode.
WIFI not working. But everything else seems to work.
I'm guessing the wifi chip in this device (PW08) isn't the same as in the YDPG18, though almost everything else is, except it's only a gps device.
Didn't test if the gps works ... still testing to see if there are some ics firmwares working for the device.
Dracotek did send me a link to the stock firmware, downloadable from 4shared - ask them for it I guess.
Link had this image in it:
pw08_20120428.img
Android 2.3.4, radioversion 2.0, kernel #r1-91-g1cd40ad, build #r1-151-g46cf014
persist.sys.language=zh - so default language is chinese unfortunately
---------- Post added at 08:10 PM ---------- Previous post was at 07:46 PM ----------
VX580WH_Android4.0.3-1.0
Way more chinese then the ydpg18 one. Also no wifi
But this rom dons't put ics in safe mode...
Argh. Anyone able to run ICS with wifi on the Cybernav Mini 2 device?

(Cybernav Mini II - PW08)
Another china tablet firmware tested without success.
Teclast_P76-Android4.0.1-AF0E.zip
ICS loads up fine, but super slow response and no support for the PW08 features.

(Cybernav Mini II - PW08)
Sorry for spamming.
Same device: http://www.coscod.com/wi-fi-gps-5-inch-touchscreen-gps-navigator/
Firmware download at their site too: http://www.coscod.com/download/os/pw08_FLASH_20120428.rar
(version 2.3.4 gb)
Please someone do ICS. Clockworkmod recovery (Needs to be touch, device only has power-button and hard reset button)

(Cybernav Mini II - PW08)
Very cool firmware, tested
TAB224 GoTab Velocity 7" Tablet - Firmware TAB224_A404.img
- wifi and gps not supported I guess when used on PW08.
Resolution is 800x480 / but text seems a bit small possibly because of PW08 is only 5".
Clean and simple, touch works and graphics is smooth and fast. Sound works.
-It is made by Yarvik.
Hope this can help - this is from stock PW08 firmware GB 2.3.4
# lsmod
ar6000 455564 0 - Live 0xbf101000
kt080x 5109 0 - Live 0xbf0fa000
sun4i_gps_ctrl 1157 1 - Live 0xbf0f4000
rtl8150 8232 0 - Live 0xbf0ec000
asix 15585 0 - Live 0xbf0e2000
usbnet 12534 1 asix, Live 0xbf0d8000
sun4i_csi0 24387 0 - Live 0xbf0cc000
videobuf_dma_contig 2934 1 sun4i_csi0, Live 0xbf0c6000
mali 110951 2 - Live 0xbf09c000
ump 22324 9 mali, Live 0xbf08f000
bma250 5268 0 - Live 0xbf082000
sun4i_keyboard 1971 0 - Live 0xbf07c000
sitronix_ts 18292 0 - Live 0xbf071000
goodix_gt82x 15739 0 - Live 0xbf067000
ft5x_ts 7608 0 - Live 0xbf060000
sun4i_ts 14702 0 - Live 0xbf056000
hdmi 14243 0 - Live 0xbf04c000
lcd 2559 0 - Live 0xbf046000
disp 218083 9 hdmi,lcd, Live 0xbf000000
cat /system/usr/keylayout/sun4i-keyboard.kl
key 102 HOME WAKE
key 1 BACK WAKE
key 139 MENU WAKE_DROPPED
key 115 VOLUME_UP
key 114 VOLUME_DOWN
Click to expand...
Click to collapse

(Cybernav Mini II - PW08)
xTAB-50 http://www.wayteq.eu/en/xtab50gps
(suppost to be 5-point capasitive screen)
The firmware on the website works with Cybernav Mini II.
xTAB-50.img
Android 2.3.4
kernel #r1-94-gfe1ef8f
build #r1-160-g863ed23

(Cybernav Mini II - PW08)
Bumping for the last time
Head over to 'hungariandroid' and register at the forums to download ICS compatible with PW08.
xTAB-50 GPS Ice Cream Sandwich (version RC2.1)
Thanks Wayteq
A few pics with the final result

craigsoup said:
Bumping for the last time
Thanks Wayteq
Click to expand...
Click to collapse
No... keep going Please!
I've just launched into all this as I mucked my CyberNav. Thanks to your research (and a whole lot of googling on my own), I've now got serveral ROMs to chose from. Feeling a lot better now, actually.
Just wanted to say thanks,
David...

craigsoup said:
OK. Tested with the device using PhoenixCard img writer....
Click to expand...
Click to collapse
A question about this...
I use PhoenixCard on a Win7 computer to "burn" an image to inserted sdcard. Mounting the result shows a "dynamic" folder full of 512 byte bin files.
So, I put said card in the CyberNav and turn it on. It boots normally and, after a short while, says "safe to remove sdcard." No rom update.
Am I doing anything wrong here?
Now, I'm attempting this because I mucked the internal sdcard partitions and it is entirely possible that said mucking is stopping the external sdcard from being read on boot. But, I just wanted to verify the proceedure I'm following before I start down the partition editing route.
Any suggestions?
David...

Your device should boot up showing a progress-bar if you insert a working upgrade sdcard.
When finished screen will say CARD OK and the device will shut down.
Remove the sdcard before booting up again.
If you do not remove the upgrade card the device will start to upgrade itself over again.
The sdcard indeed show a folder called dynamic with 100+ small files.
The upgrade files are in a hidden (to windows anyways) partition.
What firmware are you trying to flash?
---------- Post added at 05:47 PM ---------- Previous post was at 05:34 PM ----------
Kinda of an important sidenote:
Cybernav Mini: CPU: IMAPX200 ARM11 800MHz
Cybernav Mini II: CPU: 1.2ghz Cortex A8 ARM Core
OP was using Cybernav Mini
I have Cybernav Mini II and tested firmware for that device.

craigsoup said:
Your device should boot up showing a progress-bar if you insert a working upgrade sdcard.
When finished screen will say CARD OK and the device will shut down.
Remove the sdcard before booting up again.
If you do not remove the upgrade card the device will start to upgrade itself over again.
The sdcard indeed show a folder called dynamic with 100+ small files.
The upgrade files are in a hidden (to windows anyways) partition.
What firmware are you trying to flash?
---------- Post added at 05:47 PM ---------- Previous post was at 05:34 PM ----------
Kinda of an important sidenote:
Cybernav Mini: CPU: IMAPX200 ARM11 800MHz
Cybernav Mini II: CPU: 1.2ghz Cortex A8 ARM Core
OP was using Cybernav Mini
I have Cybernav Mini II and tested firmware for that device.
Click to expand...
Click to collapse
Ahh, CyberNav Mini, not Mini II. I tried the pw08_20120428 and xTAB-50 images.
So, now I'm left wondering... is the failure to load the rom because the bootloader is smart enough to recognise an incorrect rom or is it dumb enough to give up on a bad partition? I'm still thinking it's the partitions.
But, I guess now I'm still looking for a working rom for the thing too. I may not need it if I can fix the partition problem without causing further damage. But, it would be nice to have that backup. Thanks for pointing out my error above... I missed the Mini to Mini II transition.
I'm just trying to get the CyberNav working again... not really interested in a latest/greatest upgrade as it did exactly what I wanted very well. I mounted it on the handlebar of my dirtbike with custom maps. Worked great, right up until I downloaded the latest track and left it there attached to my computer... that evening I went to make an Ubuntu USB startup disk... stupid, stupid, stupid...
Then again, my new tablet should arrive today or Tuesday... 10" and, yes, I'm going to mount that on my dirtbike too Thus is the benefit of using cheap Chinese tablets... If I don't fix my little CyberNav, no real tears. It would be nice, and I'm looking at it as a learning opportunity, but if it bricks in the end... such is life, only $100. Even the 10" is still in the disposable price range.
Thanks for confirming that I was doing the PhoenixCard part correctly - that's good to know,
David...

Re: Cybernav Mini (yfpi08)
http://club.dx.com/forums/ 5" (thread has a link with firmware)
http://club.dx.com/forums/ 7"
Perhaps it is possible to get a working firmware from Freeway AX
This device looks like a match. Just replace the boot-logo with something you like (if you can stand to read some polish)
Put the firmware files in a folder called 'yfpi08' on the sdcard.
It looks like the firmwares are all android 2.2 - ICS on a 800mhz device is perhaps too much to ask?
saluzinside Thursday, September 13, 2012 4:41 AM
I contacted the producer (YF) and they gave me the latest revision of the firmare:
FRF85B.yf.v2.2-104-g1b33231
They also told me that the YFPI08 is now out of production and this will be the last firmware revision.
http://dl.dropbox.com/u/18965091/YFPI08_yf.v2.2-104.zip
Just unpack the zip in your SD, make sure the "YFPI08" folder is present.
If you don't want to change the start image, remove "logo.bmp".
With this firmware my YFPI08 runs smooth and fast and all seems to work fine.
Bye
Click to expand...
Click to collapse
Thanks saluzinside

craigsoup said:
Re: Cybernav Mini (yfpi08)
... This device looks like a match. Just replace the boot-logo with something you like (if you can stand to read some polish)
Put the firmware files in a folder called 'yfpi08' on the sdcard.
It looks like the firmwares are all android 2.2 - ICS on a 800mhz device is perhaps too much to ask?
Click to expand...
Click to collapse
Yes, I've already grabbed the yfpi08 image (3 versions actually, no idea what's different between them yet) but got the impression they were for the 7" rather than the 5". Also, it could explain why I'm reading conflicting methods for the update: Mini = put img file on sdcard (in folder ??), Mini 2 = PhoenixCard. This Android fragmentation is crazy... so many different versions and methods to deal with each. Still trying to get my head wrapped around that.
> ...if you can stand to read some polish...
Ah... I'm Canadian... Japanese wife, Chinese tablet... we don't care I was a little surprised after the first factory reset and having Android come up entirely in Chinese... took a few minutes to find the language options It's all part of the fun,
David...
More: now YFPI08_yf.v2.2-104.zip from the above clubdx forums looks very interesting. My CyberNav lists 2.2-103-gb456292 as the OS version. An UPGRADE 2.2-103 to 2.2-104. Thanks for the link. Now I have 4 versions of that yfpi08 rom to try.

well, this is looking better.
I just did the system img (left all the others out, for now) and it actually did the update as expected. So, yes, the bootloader can read the sdcard if there's something useful on it.
Sadly, after switching the system back into English, it still can't access the internal sdcard.
So, I did it again with all the the files (nice background image by the way) and that updated the bootloader. With the same result. It appears that reverting to another ROM, factory default or otherwise, does not fix my partition errors. But, the good news is that I now most definitely have a factory ROM to revert to if I need it.
So long as I don't brick the device, I'm good. I can be a little more aggressive on the partition editing... just need to make sure i don't wipe out that bootloader and I should be okay.
I did notice that the other image from the links above has a "force.bin" file included. I also noticed that my second update didn't bother doing the system.img file. I suspect said 'force.bin' file forces this? No google hits on that at all... might try it one day if all else fails.
I think I'll start a new thread on partition editing rather than hijacking this one. At this point, I'd say the thread is solved, thanks to craigsoup, for both for the Mini and Mini-2. Thanks again,
David...

[Q] Lenovo Note 8 (A936) Golden Warrior ROM

Hi !
Just picked up this big phone from Aliexpress and I want to put a custom ROM on it (preferrably Lollipop). I've searched the forums but can not find anyone that is doing anything related to this phone.. The specs are as below:
Processor - Octa-core 1.7 GHz Cortex-A53, Mediatek MT6752
GPU: Mali-T760
RAM: 2 GB
Internal Memory: 8 GB
It seems there are a couple of other models running on this processor (HTC Desire 626, 526G, 820s)...
Anyone working on anything related to this phone that I could try out ?
Kind rgds
beetlezap

There's only one stock rom for this model now and I think it's for variant with 1GB RAM. It can be found on n e e d r o m . com
No custom roms yet.

beetlezap said:
Hi !
Just picked up this big phone from Aliexpress and I want to put a custom ROM on it (preferrably Lollipop). I've searched the forums but can not find anyone that is doing anything related to this phone.. The specs are as below:
Processor - Octa-core 1.7 GHz Cortex-A53, Mediatek MT6752
GPU: Mali-T760
RAM: 2 GB
Internal Memory: 8 GB
It seems there are a couple of other models running on this processor (HTC Desire 626, 526G, 820s)...
Anyone working on anything related to this phone that I could try out ?
Kind rgds
beetlezap
Click to expand...
Click to collapse
No lollipop yet. But they have Flyme OS from Meizu as well as some other stuff in the link below. Be warned that most of the ROMS there are for the 1GB RAM version. And the whole forum is in Chinese. Have fun.
http://bbs.ydss.cn/forum-lenovo_note8-1.html

Hi
Ive got the same phone
Managed to root but thats it
Cant find any custom recoveries etc
Nash

Thank you ! Since my chinese is a bit rusty I'll wait and see if someone picks it up in the western hemisphere

Can someone do for me backup of the stock rom from this 2GB Ram Version? I bricked my phone because I used this rom from needrom which is only for 1GB RAM version (there is no information about this on the top, after this I posted this info).
Please help me to get my phone working
Probably I need only A936 GW 2+8GB scatter file called MT6752_Android_scatter.txt extracted by "MtkDroidTools"- but to get this somebody need to backup the rom…

pavllo1980 said:
Can someone do for me backup of the stock rom from this 2GB Ram Version? I bricked my phone because I used this rom from needrom which is only for 1GB RAM version (there is no information about this on the top, after this I posted this info).
Please help me to get my phone working
Probably I need only A936 GW 2+8GB scatter file called MT6752_Android_scatter.txt extracted by "MtkDroidTools"- but to get this somebody need to backup the rom…
Click to expand...
Click to collapse
Found this on chinese Lenovo forum:
pan.baidu.com/s/1hqBZKf6

nashpb said:
Found this on chinese Lenovo forum:
pan.baidu.com/s/1hqBZKf6
Click to expand...
Click to collapse
the link doesn`t work on my computer
I can`t download nothing...could you give me the link to the forum/post ?

pavllo1980 said:
the link doesn`t work on my computer
I can`t download nothing...could you give me the link to the forum/post ?
Click to expand...
Click to collapse
i cant post links coz im new
bbs.lenovo.com/forum.php?mod=forumdisplay&fid=918

pavllo1980 said:
Can someone do for me backup of the stock rom from this 2GB Ram Version? I bricked my phone because I used this rom from needrom which is only for 1GB RAM version (there is no information about this on the top, after this I posted this info).
Please help me to get my phone working
Probably I need only A936 GW 2+8GB scatter file called MT6752_Android_scatter.txt extracted by "MtkDroidTools"- but to get this somebody need to backup the rom…
Click to expand...
Click to collapse
Hi Pavillo, all,
any luck with getting the 2g ROM?
I just received the device yesterday - it came somehow rooted with tons of CN bloatware, while MTK droid tools 2.5.3 was unable to access the root shell to make a backup. After few tweaks I made the su working (reinstate the superuser using the chanfire SuperSU + adbd insecure shell v2.0, but I'm not able to Create scatter file (button greyed out, probably unknown to the tool), what I see on the list is within attached jpg. Backup is I believe incomplete - console log>
50330-205606\
--- In phone files will remain in the folder: /mnt/sdcard/clockworkmod/backup/150330-205606/
--- We keep blocks:
- nodl_proinfo - ERROR : Zero file, no space left on device!
--- We keep folders contents copying on PC
- /data/nvram
- /system
--- We pack everything kept in archive: D:\temp\Lenovo\MtkDroidTools\backups\Lenovo-A936_141127_backup_150330-205606.zip
--- task end with ERROR ---
--- task is complete ---
I'm happy to create the dump, however seems I'm not savvy enough to prepare it using mtk droid tools.
I contacted the supplier to provide stock rom for this device, because with mine I'm not sure it wasn't somehow modified.
Regards, xPeca

I backup the firmware (VIBEUI_V2.0_1450_5.9.1_ST_A936_CU)
https://mega.co.nz/#!mcRyBIrK!Q1ejyd41muUgLuJK9mXUxW0h2qh4ZrbIpmnOP_2UdHE
FYI
xpeca1 said:
Hi Pavillo, all,
any luck with getting the 2g ROM?
I just received the device yesterday - it came somehow rooted with tons of CN bloatware, while MTK droid tools 2.5.3 was unable to access the root shell to make a backup. After few tweaks I made the su working (reinstate the superuser using the chanfire SuperSU + adbd insecure shell v2.0, but I'm not able to Create scatter file (button greyed out, probably unknown to the tool), what I see on the list is within attached jpg. Backup is I believe incomplete - console log>
50330-205606\
--- In phone files will remain in the folder: /mnt/sdcard/clockworkmod/backup/150330-205606/
--- We keep blocks:
- nodl_proinfo - ERROR : Zero file, no space left on device!
--- We keep folders contents copying on PC
- /data/nvram
- /system
--- We pack everything kept in archive: D:\temp\Lenovo\MtkDroidTools\backups\Lenovo-A936_141127_backup_150330-205606.zip
--- task end with ERROR ---
--- task is complete ---
I'm happy to create the dump, however seems I'm not savvy enough to prepare it using mtk droid tools.
I contacted the supplier to provide stock rom for this device, because with mine I'm not sure it wasn't somehow modified.
Regards, xPeca
Click to expand...
Click to collapse

Thanks Yiminghung!
Edit:
I checked the scatter file against my partinfo and it seems to fit my 2g ram / 8g rom version!
Created a dd backup of my partitions to get the courage to replace the system partition from your dump - and it worked!
However the dump is CN version (no google play, no root, ton of bloatware) so I reverted successfully back to my original version..

I found this on the web, it's in three parts, but I was a bit loathed to fulfill the advert criteria before downloading it, so it's untested. I did message the dev to check it was dual SIM and he answered so it sounds legit. Would be good if someone could download the rom, combine the three parts and post it here?
http://www.lollipop-rom.club/2014/12/Lenovo-4331-Golden-Warrior-Note-8-A936.html

modelman1968 said:
I found this on the web, it's in three parts, but I was a bit loathed to fulfill the advert criteria before downloading it, so it's untested. I did message the dev to check it was dual SIM and he answered so it sounds legit. Would be good if someone could download the rom, combine the three parts and post it here?
Click to expand...
Click to collapse
Hi, imho this is a fake to earn money using the surveys, the whole page looks weird. I cross-checked the CN forum bbs.ydss.cn/forum-lenovo_note8-1.html and there is no lollipop rom, and I guess these guys are in front of the ROW.

Yeah, I was suspicious myself, could definitely be fake but I was very surprised to get a reply from the dev when I emailed him to ask if it would support dual SIM. That said I wasn't brave enough to fill in the ads! I'm just hoping someone can access those downloads without the ads.

What to do to download
nashpb said:
i cant post links coz im new
bbs.lenovo.com/forum.php?mod=forumdisplay&fid=918
Click to expand...
Click to collapse
Well, I finally got an account to the forum without any idear of the language.
I have to post or answer to see the links, but how.
I found no way to manage it, please help!!!

muckelmaus said:
Well, I finally got an account to the forum without any idear of the language.
I have to post or answer to see the links, but how.
I found no way to manage it, please help!!!
Click to expand...
Click to collapse
Hi, use translate function in google chrome as I did . I managed myself to reply to some of the topics - just a single reply enables the download link- so ultimately got to the download; usually it points somewhere to pan.baidu.com ... but honestly not too much of a use unless we will get a recovery in other than CN language. I've posted the request for cwm also in that forum. However I suspect these ROMs will be CN only, while we need ROW version.
Regards xPeca
---------- Post added at 03:10 PM ---------- Previous post was at 02:27 PM ----------
Hi all,
just to share my enthusiasm - I just got my Lenovo A936 (2g RAM/8g ROM) loaded with EN CWM recovery.
Prereq is rooted device (mine came rooted, I just switched the su app with my favorite SuperSU from chainfire) and adb (e.g. adb-setup-1.4.2.exe, could be found on xda forum).
Afterwards I used PhilZ Touch 6 Recovery executable v7 - it requested only to provide boot.img and recovery.img from my device that I created simply by adb & dd command.
After completing the setup automatically by the executable, voilla it rebooted into EN CWM recovery. Very simple!
I can dump my recovery and boot.img that might be of a good use to others.
Credit goes to yuweng!
xPeca

It's the CWM recovery V6.0.5.1 that I port from PhilZ CWM recovery, It's the English version
download link: https://mega.co.nz/#!WMpCSayQ!Gwsrw5Fs2SEkcSNzQWukr9DeiUFIFmSWie9srod72FY
into recovery method: vol up+vol down + power button ,
flash the Google package : https://mega.co.nz/#!TF5zGApL!WIzyGOz2iH340gwfDYN0_Es5jOLi7TuPFfVptIuI-7s
Good luck~
---------- Post added at 08:03 AM ---------- Previous post was at 07:58 AM ----------
Custom ROM for Lenovo A936(2GB RAM Version) (port from Dakele OS)
Download Link:https://mega.co.nz/#!HdAyDDqC!JBiNfzabP8JTljY7WmOBEW2_sST2Rxkr-exJcxpZRmw
Flash procedure:
1. Copy the zip to TF card
2. into CWM recovery (the vol key is up/down select , power key is enter key during cwm recovery mode)
3. Wipe menu- wipe data + wipe cache + wipe dalvik cache
4. Install the rom -> install the zip from /storage/sdcard1
5. Found the zip rom and confirm
6. The phone will auto reboot after the zip rom flashed.
7. Good luck and enjoy it !

I just flashed the Philz recovery, works great! I used Philz auto installer from his post on the forum, all automatic and worked like a dream. Now going to install his recovery to my other mtk devices just so I have them all the same. Hoping someone will being out a lollipop ROM for the 1gb A936 soon, it can get a but laggy.
Sent from my Nexus 7 2013 using XDA Free mobile app

Lollipop Rom
I Have the 2g -8g model the phone is awesome, running google launcher as thats my preference, But i would love to have the latest Lollipop, is there any developers out there looking at a custom rom for this device ?. If not please look at it, make ppl happy .....
Many thanks
Mick :laugh::good:

docooler M9S-Pro

My M9S-Pro finally arrived. It's a modest AmLogic S905 chip with a Mali-450, notably only because it has Ethernet, three USB ports, 3 GB of RAM and a 32 GB ROM.
My kids use the Nexus Player as a gaming device, but I am constantly running out of space even with Marshmallow's USB space reallocation (which does not work perfectly by any means). I bought this hoping to replace the Nexus Player which only has 8GB (+ whatever Marshmallow offers, and whatever some apps will allow transfer to external storage).
Right off the bat, it boots quickly and is stable. It included Kodi, some generic TV streamer with pay TV streams in foreign languages, a file manager, Antutu, various video players, and Netflix. The USB port puts out enough current to power an external 2.5" HDD.
Antutu score is 31,300 if that matters to you.
I found a version of TWRP that worked great and I rooted this by flashing the same beta-SuperSU as I used on my Nexus Player.
It uses an IR remote with shortcuts to different apps and a mouse function. It's slow but usable. I use it with an airmouse with a better experience.
I am running HAL Launcher which is just about the best experience you can hope for with a Chinese box. I also added the keylist for the Bluetooth controllers from the OUYA that I had years ago, and my kids use it for a gaming box.
It's a good value for me, but if you use Android TV boxes for streaming only you don't need the space and should probably get a cheaper box - maybe one running 6.0+ so it supports the latest version of Kodi.

Now that I have TWRP and root, I am looking for an AOSP experience.
Are these available for AmLogic systems? I've seen RemixOS for certain AmLogic boxes, but they're all a bit different and haven't tried experimenting with that yet.

How did you get this device rooted and how did you boot it into TWRP?

If rooted the Docooler, could I run a Long Term Release of Ubuntu or Mint on it. I've used Linux with our Brother MFC-J835DW and its simple to print from any Application. Android not good at all. 2nd is with Ubuntu I can set up multiple guest users in various Languages "English" " "Spanish" etc. so a guest can log on , browse, print, done.
On Android it seems to remember Users, not sure how to delete,
Very hard to print "share",
Doesn't appear to allow set up to multiple users so can only run as 1 language.
I really like that these boxes have separate monitors, keyboards, and appear not to require a fan as we are at the beach with a lot of salt air. All my connections require DiElectric Grease from Autozone so as not to corrode. Even better would be a sealed heat sink case.
Ken PlayaLindaHotel.com

root m9s-pro docooler amlogic s905 how
how root and install twrp in that model please tell me
Send me the links of software that must to download

hello, i have the m9s pro 32gb and i have slow speed in WiFi connection. Does anyone have the same problem and how can i solved? thanks in advance

Hello everyone, where can I get the original stock firmware? tnx

shdware said:
My M9S-Pro finally arrived. It's a modest AmLogic S905 chip with a Mali-450, notably only because it has Ethernet, three USB ports, 3 GB of RAM and a 32 GB ROM.
My kids use the Nexus Player as a gaming device, but I am constantly running out of space even with Marshmallow's USB space reallocation (which does not work perfectly by any means). I bought this hoping to replace the Nexus Player which only has 8GB (+ whatever Marshmallow offers, and whatever some apps will allow transfer to external storage).
Right off the bat, it boots quickly and is stable. It included Kodi, some generic TV streamer with pay TV streams in foreign languages, a file manager, Antutu, various video players, and Netflix. The USB port puts out enough current to power an external 2.5" HDD.
Antutu score is 31,300 if that matters to you.
I found a version of TWRP that worked great and I rooted this by flashing the same beta-SuperSU as I used on my Nexus Player.
It uses an IR remote with shortcuts to different apps and a mouse function. It's slow but usable. I use it with an airmouse with a better experience.
I am running HAL Launcher which is just about the best experience you can hope for with a Chinese box. I also added the keylist for the Bluetooth controllers from the OUYA that I had years ago, and my kids use it for a gaming box.
It's a good value for me, but if you use Android TV boxes for streaming only you don't need the space and should probably get a cheaper box - maybe one running 6.0+ so it supports the latest version of Kodi.
Click to expand...
Click to collapse
dow did you root the device?

@alexxdj,
You'll need to do two things.
First, download TWRP for AmLogic devices. The link is below for a whole bunch of them.
http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/16228-twrp-for-amlogic-devices
I don't remember which one I used, but I believe it was for a Minix S905 device. As long as it's S905, they are similar enough that you should be okay. Make sure it is scaled properly when you use it.
Then you'll need to download ChainFire's SuperSU.
https://download.chainfire.eu/743/supersu
Copy both files to a SD card. TWRP will be bootable, but you will need to press/hold the button that's hidden in the audio out jack. I simply used a pin. So, unplug the unit, insert the SD card, insert the pin, then plug it back in and wait for it to boot to TWRP.
If all looks well, great. You will need a mouse for this part.
Flash SuperSU as normal. Reboot.
After I booted, I actually had to run the supersu APK to make it work properly. I used Root Explorer (since it opens files in zip files with ease) to do this.
I hope this helps.

thanks for your information but where is this hidden button? I cant find it!!!

It's in one of the audio jacks in the back of the unit. Open it up if you need to see it: it comes apart easy and goes back together easy.
Otherwise get a long pin or needle and poke in the jacks until you feel it click.

shdware said:
It's in one of the audio jacks in the back of the unit. Open it up if you need to see it: it comes apart easy and goes back together easy.
Otherwise get a long pin or needle and poke in the jacks until you feel it click.
Click to expand...
Click to collapse
i found it is the spdif jack thanks. do you remember if needs to rename the recovery? Because i downloaded the recovery for minix s905 but i cant boot it to twrp

Try naming it 'recovery.img'
The recovery should not be zipped. Extract the IMG file if it is.

yes i know that. maybe i tried wrong recovery. after 2 times failed to boot to recovery. when i release the button? when i show the android and starts to erase?

alexxdj said:
i found it is the spdif jack thanks. do you remember if needs to rename the recovery? Because i downloaded the recovery for minix s905 but i cant boot it to twrp
Click to expand...
Click to collapse
I press and hold it until the TWRP logo appears.
I think you have the wrong recovery. Try the MINIX MX one. AmLogic makes a lot of devices, and the S805, S812, S905, and S912 all require different recoveries.
You need to make sure it's for the S905. Google is your friend here.
After I successfully rooted, I ultimately decided to flash TWRP itself on my box.

i tried 50 recovery for s905 form yesterday but nothing. Cant boot to twrp!!

alexxdj said:
i tried 50 recovery for s905 form yesterday but nothing. Cant boot to twrp!!
Click to expand...
Click to collapse
Apologies, I didn't realize the URL to Freaktab was truncated. I've corrected it now.
TWRP for AmLogic Devices
Try a few of these. There are only 31, and over half of them can be discounted because they are not for the S905.
If I remember right, I used this one:
/TWRP_MiniMX.img

shdware said:
Apologies, I didn't realize the URL to Freaktab was truncated. I've corrected it now.
TWRP for AmLogic Devices
Try a few of these. There are only 31, and over half of them can be discounted because they are not for the S905.
If I remember right, I used this one:
/TWRP_MiniMX.img
Click to expand...
Click to collapse
You remember right!!!! this recovery was. thanks for your help friend.

@Gi3drius, @k_graham, @stilonas -
I've provided a tutorial. Read the comments and let me know if they help.

is there any update for this tx box?? and why do you want to install TWRP? I use it only fr install roms but I can´t find any for this model

Custom ROM + Recovery + Root for X96 2GB/16GB Box?

Hello,
I've purchased this one: http://www.dx.com/p/x96-tv-box-andr...-2gb-ram-16gb-rom-us-plug-449347#.WPuxONryuUk
Just wondering what ROMs and recoveries work. I've searched a bunch and found some dead links and conflicting information so I'm hesitant to flash it especially where I do not have a stock image to go back to if it renders it bricked.
If anyone can help out, it would be much appreciated.
Thank you,
Scott
Note: Keeping a repository here as I find more information about this box: https://drive.google.com/open?id=0Bzj6JjnAJZjjczVIbFlHS3VUWlU

Working on it
Custom TWRP and stripped down/modded firmware is on the way.

I hope we can get a pure Android Rom working on it

Again: Working on it
Fully unbranded and hopefully with unlocked custom bootanimation (Original Google would be my prefered option over Mbox).
Give me a bit of time and you will find flashable ZIP soon

All done

Another question about the box: is-it possible to have Android TV instead of a modded android marshmallow? Because the interface would be a lot easier to use.

Android TV is a complete different story and you can't really compare the two like this.
Android TV uses the Leanback launcher if I am not mistaken.
Already tried to include it into a testrom but so far no real luck as it uses a lot more binaries that are not included in the standard system.
Will have to create some symlinks, add binaries and do a lot of testing - not to mention finding all the included apps for android TV and figuring out how to make them work.
If the interface is your only trouble check some nice launchers first, like Apex for example.
Once I have something cooked up that actually works as expected you will find it in this section somewhere

Also interesting to test that , as mine is not even root ^^

Rom
Any news about the firmware for this device?

Nope, still no updates coming from the chinamen, seems they already abandoned firmware updates and moved on to different devices.

See this thread (beta 6 I used for.mine)
https://forum.xda-developers.com/an...gic/rom-x96-2-16gb-root-supersu-twrp-t3596525

I join the thread because because of a storm my X96 looks brick. I've been looking everywhere but I do not find the guide for unbrick. I wanted to save it not to throw it but I do not know where to download the firmware how to do unbrick. I know I'm in the wrong thread but I did not want to open it a lot like this and make it confusing. Thank you all

As long as you get into the TWRP recovery on the SD card all should be fine - assuming the box is a X96.
If that fails only the burn tool or burn card maker can help with a genuine firmware to get going again.

Hi guys sorry to bump an old thread. I'm still trying to find the TWRP zip for these so I can do a complete back up and then paste on other boxes.

Have an X96 Amlogic S905X Quad Core 2G/16G Android 6.0 Wifi HD 4K TV Box.
I flashed the FULLY UNBRANDED Kodi 17, everything looked fine but the box's red light just stays on after the reboot.
Does not go into TWRP at all or nothing on screen.
It now a paperweight?
Downloaded the Stock firmware (Android 6.0.1 X96 Amlogic S905x 20161122) and am trying to start box with a bootable SD-card.
BurnCardMaker asks for an IMG file with all the relevant (aml_autoscript, factory_update_param.aml, firmware.zip, recovery.img, u-boot.bin, etc) files in but i cannot find this IMG file.
Without these BurnCardMaker does not work at all or nothing happens on TV box at least.
Must also say, i use a 64gig SD card but it worked for the initial flash.
Am i wasting my time with this box now?
Thanks for help.

MX10 Android TV Box - SuperSU Issue

I recently purchased an MX10 Android TV Box running Android 7.1.2
It is supposed to be rooted and SuperSU came installed but when you run it, it reports that the SuperSU binary is not installed and SuperSU cannot install it. I've done a full factory reset but the image comes back broken like that.
I downloaded updated firmware for this box and the SuperSU zip file but I cannot get this box into recovery mode. Everything I've found says to stick a toothpick in the AV hole and power up the box. When I do that, the MX10 logo shows but then it pops up with "erasing" and then reboots. All that does is a full factory reset.
If I run Root Checker, it says I don't have root.
Anyone have any experience with this issue and this box? If I can't get into recovery mode then I can't fix SuperSU and/or update the firmware to one where I'm rooted.
The box otherwise seems to work ok with the exception that I cannot set a live wallpaper. I'm just not rooted.
Thanks for any help!
-TimG

TimothyGaray said:
I recently purchased an MX10 Android TV Box running Android 7.1.2
It is supposed to be rooted and SuperSU came installed but when you run it, it reports that the SuperSU binary is not installed and SuperSU cannot install it. I've done a full factory reset but the image comes back broken like that.
I downloaded updated firmware for this box and the SuperSU zip file but I cannot get this box into recovery mode. Everything I've found says to stick a toothpick in the AV hole and power up the box. When I do that, the MX10 logo shows but then it pops up with "erasing" and then reboots. All that does is a full factory reset.
If I run Root Checker, it says I don't have root.
Anyone have any experience with this issue and this box? If I can't get into recovery mode then I can't fix SuperSU and/or update the firmware to one where I'm rooted.
The box otherwise seems to work ok with the exception that I cannot set a live wallpaper. I'm just not rooted.
Thanks for any help!
-TimG
Click to expand...
Click to collapse
Yeah i just got mine yesterday and im having the same issue. I get a Root user account error with Root Checker Pro. Ive tried clearing data in the SU app but nothing. There is an update for SU in the Play Store but i read on Freaktab where someone said not to update SU app or it will give you a bootloop. I havent updated it yet cuz i wanted to do some more investigating but i really dont see the harm in just updating the app itself. I know updating the su binary will result in a bootloop because i updated the binary on my T95Z and got the bootloop. Ive been googling all day trying to find a TWRP.img file for the MX10 but have found nothing yet. Ive also been looking for a root method for this box as well but not sure what i should use. It would be nice if these each box had it own sub forum like the phones have.. would make life so much easier. lol
If you figure anything out i would appreciate if you would pass that info on.. will do likewise.

htxp://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/freaktabs-tools-utility-collection/656634-twrp-recovery-for-rockchip-devices
I'm in the same boat. Recieved my mx10 a week ago. Tried the tooth pick in the av port. Shows on screen 'erasing' and eventually factory defaults. No root

Android 7.01 said:
htxp://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/freaktabs-tools-utility-collection/656634-twrp-recovery-for-rockchip-devices
I'm in the same boat. Recieved my mx10 a week ago. Tried the tooth pick in the av port. Shows on screen 'erasing' and eventually factory defaults. No root
Click to expand...
Click to collapse
Have you updated the SU app? Not the su binary but the app from play store itself?

Hi, actually I was looking to root the MX10 but for a simple reason:
all I want to to is to get a shutdown or power off button, but this seems missing on the MX10 .. !!! First time I see a box without the shutdown option.
I looked up for apps providing power off button but they all require root access and so don’t work on the out-of-the-box MX10.
Anyone has same need and a solution?

Hi, I received my MX10, a few days ago and have the same problem (SuperSU issue).
I purchased it from GeekBuying, and posted on their blog, for the latest firmware update I could find: http://blog.geekbuying.com/2017/12/...r4-32gb-emmc-tv-box-firmware-update-20171214/
Really want to root it, so I can edit the keyboard/remote control files to map keys on the H18+ remote I bought at the same time as the MX10.
I haven't tried flashing different firmware (or booting into recovery). If/when I receive a reply to my post on the GeekBuying blog, I'll post here - but no idea if they'll reply.

supergiulio said:
Hi, actually I was looking to root the MX10 but for a simple reason:
all I want to to is to get a shutdown or power off button, but this seems missing on the MX10 .. !!! First time I see a box without the shutdown option.
I looked up for apps providing power off button but they all require root access and so don’t work on the out-of-the-box MX10.
Anyone has same need and a solution?
Click to expand...
Click to collapse
Hey bud if you hold the power button down on the remote for about 5 seconds and it will bring the reboot menu up.. it has shut down and restart.
Do the same to boot up
Ok.. everyone else that was wondering about root.. looks like this is our answer.. no root.. no TWRP...... for now at least. This box is still fairly new so im
not giving up. It took 4-5 months for them to get root for Snapdragon S8 so who knows.. it may come for the MX10 one day too
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

freak69ize said:
Hey bud if you hold the power button down on the remote for about 5 seconds and it will bring the reboot menu up.. it has shut down and restart.
Ok.. everyone else that was wondering about root.. looks like this is our answer.. no root.. no TWRP...... for now at least. This box is still fairly new so im
not giving up. It took 4-5 months for them to get root for Snapdragon S8 so who knows.. it may come for the MX10 one day too
View attachment 4436137
Click to expand...
Click to collapse
Seems really odd that it would come with Super SU installed, and not be rooted. Then again, it also advertises (on GeekBuying.com - in case anyone purchased elsewhere) that it comes with Kodi pre-installed, and mine didn't.
---------- Post added at 12:25 AM ---------- Previous post was at 12:21 AM ----------
TimothyGaray said:
...I downloaded updated firmware for this box and the SuperSU zip file...-TimG
Click to expand...
Click to collapse
Whereabouts did you get the firmware? Was it this one MX10_RK3328_KODI18.0_20171208.img ? Listed on this GeekBuying blog entry: http://blog.geekbuying.com/2017/12/...r4-32gb-emmc-tv-box-firmware-update-20171214/

RADiuMOz said:
Seems really odd that it would come with Super SU installed, and not be rooted. Then again, it also advertises (on GeekBuying.com - in case anyone purchased elsewhere) that it comes with Kodi pre-installed, and mine didn't.
---------- Post added at 12:25 AM ---------- Previous post was at 12:21 AM ----------
Whereabouts did you get the firmware? Was it this one MX10_RK3328_KODI18.0_20171208.img ? Listed on this GeekBuying blog entry: http://blog.geekbuying.com/2017/12/...r4-32gb-emmc-tv-box-firmware-update-20171214/
Click to expand...
Click to collapse
Yeah i agree.. odd it ships with su installed but no root. Theres some fw's on this page.... ive downloaded just in case i ever need it... dont see why i would since there is no root though. lol
http://freaktab.com/forum/tv-player...3328-4-32gb-tv-box-2-4ghz-wifi-fast-lan/page2

Hi mate,
Try my guide in the Media TV Box Amlogic forum. The recovery image is for TWRP. But you could try Philz or others. Worked on S912 and S905 so far fine.
https://forum.xda-developers.com/an...mlogic-s905x-s912x-faq-backup-switch-t3752897
No root? I suggest you follow backup instructions, take 3 backups - all paritions, boot only, recovery only.
Then you can extract the boot image from your backup and use that with Magisk to root your system. After Magisk modifies your boot image, reboot, and flash the modified package via TWRP bootable (see topic)
If you have anything you wish to contribute, please feel free to post anything you have learnt that you feel will help others.
Cheers mate!

Thanks for the tip
Thanks Freak69! It was so easy ... but still it would be good to root the MX10
freak69ize said:
Hey bud if you hold the power button down on the remote for about 5 seconds and it will bring the reboot menu up.. it has shut down and restart.
Do the same to boot up
Ok.. everyone else that was wondering about root.. looks like this is our answer.. no root.. no TWRP...... for now at least. This box is still fairly new so im
not giving up. It took 4-5 months for them to get root for Snapdragon S8 so who knows.. it may come for the MX10 one day too
View attachment 4436137
Click to expand...
Click to collapse

flipmode_11 said:
Hi mate,
Try my guide in the Media TV Box Amlogic forum. The recovery image is for TWRP. But you could try Philz or others. Worked on S912 and S905 so far fine.
https://forum.xda-developers.com/an...mlogic-s905x-s912x-faq-backup-switch-t3752897
No root? I suggest you follow backup instructions, take 3 backups - all paritions, boot only, recovery only.
Then you can extract the boot image from your backup and use that with Magisk to root your system. After Magisk modifies your boot image, reboot, and flash the modified package via TWRP bootable (see topic)
If you have anything you wish to contribute, please feel free to post anything you have learnt that you feel will help others.
Cheers mate!
Click to expand...
Click to collapse
Hey @flipmode_11 - which TWRP image should we use, please? In your post, you state to, "Download the X96 Media Player TWRP Recovery image...or a different device". As the X96 is S905X (from a quick Google - don't shoot me if I'm wrong!) and the MX10 is RK3328, the TWRP image for the X96 wouldn't work, would it? I took a look at the list of devices and can't find a matching device.
Cheers,
Richard.
---------- Post added at 09:59 PM ---------- Previous post was at 09:54 PM ----------
Somethng that REALLY annoys me about the MX10, is that I can't get it to write to my external USB drive (NTFS). It worked just fine - out of the box - on my old MXIII-G, but the MX10 just won't write to it (Total Commander and an FTP server app I usually use in order to access it from my LAN). Is this because of some weird driver, or because of root (permissions... I checked under apps and it has access to storage - but of course it does, because it can read the drive)?
I'm probably not too fussed about rooting this thing, if I can just get external drives working with it.
I did read about Android not supporting NTFS, for write - but my old MXIII-G did, so I'm assuming this should, too. The only other thing I can think of, is that the MXIII-G had something in the firmware for writing to NTFS.
I can't see why there would be external USB drive support, but you can't write to it - I mean, it's a TV box, surely there are some other people out there who copy movies, etc. to an external drive on the box, to watch?

G'day mate,
Yeah look just give it a try and see how you go. Booting to this recovery.img will not make any modifications. It is simply loading an interface and relevant dependencies for it to run. I read something about how RockChip devices are limited or something. I forget now, but that made me steer clear of them, despite having more regular updates and new hardware. :/ hmmm
No, you won't find a matching device. It is shocking that these mass-manufacturered generic devices aren't also listed. I recommend you give the recovery.img in my topic a stab.
Where did you source you MX10 from? Have you asked them? Although, every single Chinese seller I have come across has zero working knowledge or which models are better, plus have 101 mistakes in their specs (just got a $50 and $100 refund on Ebay for X96 and a 10.1" tablet! Wrong specs!).
NTFS? So it can READ but not WRITE? Hmm I would wipe everything in FAT32 for Android. Everything is much happier. You could try exFAT which is a superior file system. Have you tried this? Got any other ExFAT + FAT32 devices? Hmm actually I think I've been down that path with exFAT (Paragon tools to solve). Double check exFAT compatibility before proceeding with backup/wipe/re-format. Actually I know the Nexus 6 was able to read NTFS storage as helped a mate with one. But depends on the manufacturer! But the Nexus6 couldn't write to HPFS - never tested exFAT. I think there is an app - USB Media Exporter...? USB Media Explorer..? - I forget!?!
As you mentioned Total Commander, you could try it with the Paragon tool plug-in: https://play.google.com/store/apps/details?id=com.paragon.tcplugins_ntfs_ro -or- https://play.google.com/store/apps/details?id=com.paragon.mounter (not tried this, but images looks interesting - free!). I use Solid Explorer + Smart File Manager - never been a fan of TC... There are other methods out there, but they require Root, which will not help you! e.g. ChainFire's StickMount.
No, I think you should proceed. However, as per my topic, take a full backup of 3+ partitions prior to making changes. I had to revert to a backup on 20th as had 2x SED processes going nuts. Titanium backup'd all important stuff. Then rebooted to Micro SD TWRP and did 3 Partitions (leaving int. storage intact). So Rooting is essential. It really is. Plus using Magisk is even more important, as it does not make modifications to /System which makes life much easier upgrading/troubleshooting/debugging et al.
NOTE: I would infact backup all the data on that ext. drive, delete partitions and create 2 FAT32/EXFAT/NTFS for redundancy. I have had too many past issues with partitions getting corrupt on external drives.
1. Backup Boot partition, 2. Extract the backup and find the boot.img, 3. Install Magisk Manager, click Install and select option 2 and browse for the boot.img, 4. Flash updated /MagiskManager/boot.img via TWRP and you are rooted w/ Systemless SU and BusyBox. There is seriously nothing better than having Root and being Play "Certified". You won't look back! Plus you can always re-flash the stock Boot.img and do OTA manufacturer updates, then open Magisk Manager and repeat.
Mac is like that. You can only read NTFS drives, but read / write to stupid HFS/HPFS drives with Mac, unless you install something like Paragon to read NTFS. The same for Windows, can read HFS+ but read/write NTFS.
Every Android device, regardless of OS, is totally different. Different Kernel's, different builds, ...
Good luck and let me know how you go?
Cheers mate!
RADiuMOz said:
Hey @flipmode_11 - which TWRP image should we use, please? In your post, you state to, "Download the X96 Media Player TWRP Recovery image...or a different device". As the X96 is S905X (from a quick Google - don't shoot me if I'm wrong!) and the MX10 is RK3328, the TWRP image for the X96 wouldn't work, would it? I took a look at the list of devices and can't find a matching device.
Cheers,
Richard.
---------- Post added at 09:59 PM ---------- Previous post was at 09:54 PM ----------
Somethng that REALLY annoys me about the MX10, is that I can't get it to write to my external USB drive (NTFS). It worked just fine on my old MXIII-G, but the MX10 just won't write to it (Total Commander and an FTP server app I usually use in order to access it from my LAN). Is this because of some weird driver, or because of root (permissions... I checked under apps and it has access to storage - but of course it does, because it can read the drive)?
I'm probably not too fussed about rooting this thing, if I can just get external drives working with it.
I did read about Android not supporting NTFS, for write - but my old MXIII-G did, so I'm assuming this should, too. The only other thing I can think of, is that the MXIII-G had something in the firmware for writing to NTFS.
I can't see why there would be external USB drive support, but you can't write to it - I mean, it's a TV box, surely there are some other people out there who copy movies, etc. to an external drive on the box, to watch?
Click to expand...
Click to collapse

Post redundant.

flipmode_11 said:
Did you see my questions?
Where did you source your device from? Ebay? Online? Retail?
What software and steps above did you try?
Did you try the Paragon app with Total Commander?
Did you try downloading the recovery.img linked in the Media TV Box category? https://forum.xda-developers.com/showthread.php?p=75644464
Using Magisk is even more important these days as developers attempt to detect SU/Root, plus Magisk does not make modifications to your /System partition which makes life MUCH easier upgrading / troubleshooting / debugging and allows you to mask Root/SuperUser to then use all apps (Spotify, Play, Netflix, Stan, et al.)
Click to expand...
Click to collapse
I got my box from Amazon. Ive not tried anything with it yet. I dont use Total Commander.. that was another guy saying something about it and wanting to be able to write to external sd... i could care less for that. I want root for adaway and a few other things. Im using Blockada right now to block ads but i cant use it and Expressvpn at the same time.. so my choices are either block ads or run vpn to be anonymous.. cant do both because you cant run two vpns at the same time in android and blockada's vpn is not the same kind of vpn.
Ok i just read your thread.. i will give it a try sometime this weekend maybe.
Ya know the weird thing is is that DevCheck says i have root and busybox installed. Su app is there but say su binaries arent installed. I dont get why this box is shipped like this. lol

You are funny! I was talking to @RADiuMOz - I had quoted him.
No wonder your reply made no sense. Then my reply made no sense.
Please see my topic on AMLogic devices "AMLogic S905 S912 FAQ ✰ Fix Root, Switch SU, Backup/Restore etc ✩ Media Player TV Box" here: https://forum.xda-developers.com/an...mlogic-s905x-s912x-faq-backup-switch-t3752897
I would suggest you follow the steps to Backup first as it does not make any changes to your system.
Then follow steps to Root (download 3 files) and proceed with the FAQ I have written on how to root and which of the 3 methods suit you (probably the one similar to Part 1 of the backup, plus flashing the ZIP.
I had similar corrupt Root issue where SU and SUD were present, but didn't appear to have permissions. Some apps reported Root OK, and others No Root.
Anyway, let me know how you go. I have documented how to un-root / clean-up and then to re-root your system (i.e. Corrupt Root). Reply there.
Cheers!
p.s. May I suggest you check out AdGuard instead of AdAway? It lets you subscribe to block lists, plus you can set-up DUAL VPN's with it (read their KB/FAQ's). AdGuard's menu's allows you to accomodate both being able to VPN and run adblocking at the same time - ROOT Free. So you can probably ignore everything I have even said! LOL (AdGuard > Left Menu > Settings > Proxy Settings)
VyprVPN is far better and I suggest you try them when they have a promo. You can enable an option to block malicious servers, etc. But no way of managing this and adding adverts. Anyway, I switched and tried various VPN providers and found VyprVPN far better, plus offer a higher level of OpenVPN encryption which is not blocked or detected by 3rd parties called "Chameleon".
freak69ize said:
I got my box from Amazon. I want root for AdAway and a few other things. Im using Blockada right now to block ads but i cant use it and ExpressVPN at the same time.. so my choices are either block ads or run vpn to be anonymous.. cant do both because you cant run two vpns at the same time in android and blockada's vpn is not the same kind of vpn.
Ok i just read your thread.. i will give it a try sometime this weekend maybe.
Ya know the weird thing is is that DevCheck says i have root and busybox installed. Su app is there but say su binaries arent installed. I dont get why this box is shipped like this. lol
Click to expand...
Click to collapse

EXPERIMENT: Has anyone tried an OTG adapter in the USB-C slot for a Galaxy S8? Then connect a small USB drive with a recovery.img only, formatted in FAT32? You could even try placing the recovery.img on your Micro SD inside your phone...? Perhaps while holding down menu + up or menu + down, switch on your phone, and it might read the recovery.img on the external memory and boot into that?
*Anyway*, try the same thing in your MX10 and report back add success. Use a compatible S905 TWRP recovery.img (see my type here with download attached and tested with S905x Devices.
Hmm... So many ideas... so many things I have not tried!
freak69ize said:
Hey bud if you hold the power button down on the remote for about 5 seconds and it will bring the reboot menu up.. it has shut down and restart. Do the same to boot up
Ok.. everyone else that was wondering about root.. looks like this is our answer.. no root.. no TWRP...... for now at least. This box is still fairly new so im not giving up. It took 4-5 months for them to get root for Snapdragon S8 so who knows.. it may come for the MX10 one day too
View attachment 4436137
Click to expand...
Click to collapse

flipmode_11 said:
G'day mate,
Yeah look just give it a try and see how you go. Booting to this recovery.img will not make any modifications. It is simply loading an interface and relevant dependencies for it to run. I read something about how RockChip devices are limited or something. I forget now, but that made me steer clear of them, despite having more regular updates and new hardware. :/ hmmm
No, you won't find a matching device. It is shocking that these mass-manufacturered generic devices aren't also listed. I recommend you give the recovery.img in my topic a stab.
Where did you source you MX10 from? Have you asked them? Although, every single Chinese seller I have come across has zero working knowledge or which models are better, plus have 101 mistakes in their specs (just got a $50 and $100 refund on Ebay for X96 and a 10.1" tablet! Wrong specs!).
NTFS? So it can READ but not WRITE? Hmm I would wipe everything in FAT32 for Android. Everything is much happier. You could try exFAT which is a superior file system. Have you tried this? Got any other ExFAT + FAT32 devices? Hmm actually I think I've been down that path with exFAT (Paragon tools to solve). Double check exFAT compatibility before proceeding with backup/wipe/re-format. Actually I know the Nexus 6 was able to read NTFS storage as helped a mate with one. But depends on the manufacturer! But the Nexus6 couldn't write to HPFS - never tested exFAT. I think there is an app - USB Media Exporter...? USB Media Explorer..? - I forget!?!
As you mentioned Total Commander, you could try it with the Paragon tool plug-in: https://play.google.com/store/apps/details?id=com.paragon.tcplugins_ntfs_ro -or- https://play.google.com/store/apps/details?id=com.paragon.mounter (not tried this, but images looks interesting - free!). I use Solid Explorer + Smart File Manager - never been a fan of TC... There are other methods out there, but they require Root, which will not help you! e.g. ChainFire's StickMount.
No, I think you should proceed. However, as per my topic, take a full backup of 3+ partitions prior to making changes. I had to revert to a backup on 20th as had 2x SED processes going nuts. Titanium backup'd all important stuff. Then rebooted to Micro SD TWRP and did 3 Partitions (leaving int. storage intact). So Rooting is essential. It really is. Plus using Magisk is even more important, as it does not make modifications to /System which makes life much easier upgrading/troubleshooting/debugging et al.
NOTE: I would infact backup all the data on that ext. drive, delete partitions and create 2 FAT32/EXFAT/NTFS for redundancy. I have had too many past issues with partitions getting corrupt on external drives.
1. Backup Boot partition, 2. Extract the backup and find the boot.img, 3. Install Magisk Manager, click Install and select option 2 and browse for the boot.img, 4. Flash updated /MagiskManager/boot.img via TWRP and you are rooted w/ Systemless SU and BusyBox. There is seriously nothing better than having Root and being Play "Certified". You won't look back! Plus you can always re-flash the stock Boot.img and do OTA manufacturer updates, then open Magisk Manager and repeat.
Mac is like that. You can only read NTFS drives, but read / write to stupid HFS/HPFS drives with Mac, unless you install something like Paragon to read NTFS. The same for Windows, can read HFS+ but read/write NTFS.
Every Android device, regardless of OS, is totally different. Different Kernel's, different builds, ...
Good luck and let me know how you go?
Cheers mate!
Click to expand...
Click to collapse
First up - sorry mate - I actually thought I'd replied to your post, but clearly either didn't submit it, or just dreamed the whole thing.
I have to wait for free time at the weekends (I have kids), but I'll go back to your topic and give that a go.
As for NTFS, etc. I ended up buying a Synology DS218J NAS box as I want my daughter to be able to back up her MacBook to it, as well as probably back up some of my stuff to it as well - and of course then use for the MX10. I bought it from GeekBuying, and they're not that particularly helpful. Not intentionally unhelpful, though.
My MXIII-G was great for just working straight out of the box, with the external NTFS drive (exact same drive).
So now, as for rooting, my only reason will be so I can remap some of the keys on my remote - but don't absolutely have to do that. But I'll do backups anyway, so that I'm ready for if/when any firmware updates come out.
I'll certainly know to have a MUCH better look round, before buying my next Android TV box, though - that's for sure. I did a quick search, but didn't find anything on a user level - but also didn't search XDA: just did a regular Google search.
Thanks for your detailed reply, as I know it takes time and thought on your part - it's much appreciated. As soon as I've got something to report, I'll post in the same thread, so other people can perhaps benefit from my findings.
Cheers,
Richard.
---------- Post added at 08:52 PM ---------- Previous post was at 08:48 PM ----------
flipmode_11 said:
G'day mate,
Yeah look just give it a try and see how you go. Booting to this recovery.img will not make any modifications. It is simply loading an interface and relevant dependencies for it to run. I read something about how RockChip devices are limited or something. I forget now, but that made me steer clear of them, despite having more regular updates and new hardware. :/ hmmm
No, you won't find a matching device. It is shocking that these mass-manufacturered generic devices aren't also listed. I recommend you give the recovery.img in my topic a stab.
Where did you source you MX10 from? Have you asked them? Although, every single Chinese seller I have come across has zero working knowledge or which models are better, plus have 101 mistakes in their specs (just got a $50 and $100 refund on Ebay for X96 and a 10.1" tablet! Wrong specs!).
NTFS? So it can READ but not WRITE? Hmm I would wipe everything in FAT32 for Android. Everything is much happier. You could try exFAT which is a superior file system. Have you tried this? Got any other ExFAT + FAT32 devices? Hmm actually I think I've been down that path with exFAT (Paragon tools to solve). Double check exFAT compatibility before proceeding with backup/wipe/re-format. Actually I know the Nexus 6 was able to read NTFS storage as helped a mate with one. But depends on the manufacturer! But the Nexus6 couldn't write to HPFS - never tested exFAT. I think there is an app - USB Media Exporter...? USB Media Explorer..? - I forget!?!
As you mentioned Total Commander, you could try it with the Paragon tool plug-in: https://play.google.com/store/apps/details?id=com.paragon.tcplugins_ntfs_ro -or- https://play.google.com/store/apps/details?id=com.paragon.mounter (not tried this, but images looks interesting - free!). I use Solid Explorer + Smart File Manager - never been a fan of TC... There are other methods out there, but they require Root, which will not help you! e.g. ChainFire's StickMount.
No, I think you should proceed. However, as per my topic, take a full backup of 3+ partitions prior to making changes. I had to revert to a backup on 20th as had 2x SED processes going nuts. Titanium backup'd all important stuff. Then rebooted to Micro SD TWRP and did 3 Partitions (leaving int. storage intact). So Rooting is essential. It really is. Plus using Magisk is even more important, as it does not make modifications to /System which makes life much easier upgrading/troubleshooting/debugging et al.
NOTE: I would infact backup all the data on that ext. drive, delete partitions and create 2 FAT32/EXFAT/NTFS for redundancy. I have had too many past issues with partitions getting corrupt on external drives.
1. Backup Boot partition, 2. Extract the backup and find the boot.img, 3. Install Magisk Manager, click Install and select option 2 and browse for the boot.img, 4. Flash updated /MagiskManager/boot.img via TWRP and you are rooted w/ Systemless SU and BusyBox. There is seriously nothing better than having Root and being Play "Certified". You won't look back! Plus you can always re-flash the stock Boot.img and do OTA manufacturer updates, then open Magisk Manager and repeat.
Mac is like that. You can only read NTFS drives, but read / write to stupid HFS/HPFS drives with Mac, unless you install something like Paragon to read NTFS. The same for Windows, can read HFS+ but read/write NTFS.
Every Android device, regardless of OS, is totally different. Different Kernel's, different builds, ...
Good luck and let me know how you go?
Cheers mate!
Click to expand...
Click to collapse
Apologies! I thought I'd replied, here, but clearly didn't submit it, or just dreamed I had. I've replied to your PM, but also for anyone/everyone else's benefit (and in brief), I bought my MX10 from GeekBuying. I just bought a NAS box, so I'm going to use that instead of trying to get NTFS working, although the people at GeekBuying said, "Our factory tests show that the MX10 can read and write ntfs hard drives. So please try again." I'd be interested to hear whether anyone else is able to write to NTFS.
I'm going to go back to your topic, and give that a go - and will then post back here, to let everyone know (hopefully might benefit someone).
Cheers,
Richard.

i have mx10 and it suddenly stuck in start logo when i open,i dont have any idea please help.
i try to factory reset using toothpick and hit the factory reset no command coming out to delete all files and quick return to booth the system.
whwn i try to reboot again stuck in start logo i'll wait for 30 min but still just rounding the startup logo.Please help me...

Better Mobile App

welcome