Hello, I have a H-901 v-10 That I've successfully unlocked the bootloader and am ready to flash TWRP recovery but every time I try to open the file my computer wants to burn it to a cd/disc.
What am I doing wrong?
hank1948 said:
Hello, I have a H-901 v-10 That I've successfully unlocked the bootloader and am ready to flash TWRP recovery but every time I try to open the file my computer wants to burn it to a cd/disc.
What am I doing wrong?
Click to expand...
Click to collapse
Stop trying to OPEN the image file. You should be on a command line using the fastboot flash command to flash the .img file directly to the recovery partition. You need to do some more reading because it sounds to me like you haven't yet installed the android developers kit which contains the adb and fastboot commands you will need to communicate with your phone.
Start by doing what you should have tried first...a google search for "How do I install TWRP on my phone?"...the first result is https://www.howtogeek.com/240047/how-to-flash-twrp-recovery-on-your-android-phone/
I've setup adb and fastboot, opened the twrp folder and have opened a command prompt window by typing shift + right click and entered fastboot flashing recovery recovery image then it showed some code on the command prompt but it didn't flash the twrp what do I do
Related
Hi guys please help.
Dont know if I posted it in the right placed.
I cant post it in the relevant thread since it is a dev thread and i'm a noob
So this is my first android so i'm basically super noob (my technical record was to Jailbreak an iPhone)
My error seem pretty simple but I could not figure it out.
I'm trying to flash the CM10 ROM according to this:
http://forum.xda-developers.com/showthread.php?t=2027304
What i have managed to do:
Unlock bootloader.
root with RootBoot V5.
install SU and flashed TWRP recovery for Intl version with the amazing Hasson2000 all-in-one tool.
Where I got stuck:
now i downloaded the CM rom zip file and the its specific kernel.
changed the kernel name to: boot.img
placed the file in the kernel folder (of the tool).
hit the flash kernerl (marked the 'with this command').
the CMD window opened, and showed this error:
error: cannot load 'Kernels/boot.img'
picture - http://sdrv.ms/YtPHoU
triple checked the file name and the right directory
I would appreciate any help!
Thanks
My device:
HTC One X+ international unbranded
1.14.401.16
I think your making things too complicated using this kernel flasher software.
Just download and install the Android SDK. Once installed find the platform-tools folder, copy your kernel .img to that folder, connect your phone in fastboot mode. Then hold shift and right click, choose open command window from the contex menu. Then just type into the prompt "fastboot flash boot boot.img" (or the name of the .img).
Done
Sent from my HTC One X+ using Tapatalk 2
ummmm why are you adb pushing?? the command is:
just put it in the folder where ever fastboot and adb is
fastboot flash boot boot.img
Lloir said:
ummmm why are you adb pushing?? the command is:
just put it in the folder where ever fastboot and adb is
fastboot flash boot boot.img
Click to expand...
Click to collapse
AndroHero said:
I think your making things too complicated using this kernel flasher software.
Just download and install the Android SDK. Once installed find the platform-tools folder, copy your kernel .img to that folder, connect your phone in fastboot mode. Then hold shift and right click, choose open command window from the contex menu. Then just type into the prompt "fastboot flash boot boot.img" (or the name of the .img).
Done
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Thank you guys for helping me.
I tried both methods and recieved the same error in both of them in CMD:
error: cannot load boot.img
Lloyr method:
4 files in fastboot folder:
adb
AdbWinApi.dll
fastboot
boot.img
entered fastboot from device ----> plug in to pc (debugging is on by default) ----> run CMD from this folder----> writing command "fastboot flash boot boot.img" -----> error message
AndroHero method:
download the Android SDK (zip file named adt-bundle-windows-x86) and exract it to desktop.
in the folder adt-bundle-windows-x86, i went to "sdk" and then "platform tools".
copied the boot.img file to "platform tool" folder and ran the CMD from this folder.
typed the command "fastboot flash boot boot.img" and boom ----> error: cannot load boot.img
thanks again
>.< you NEED to be in bootloader
type in adb reboot bootloader and make sure you are in fastboot usb (select it if it's not already done for you)
then
fastboot flash boot boot.img
Lloir said:
>.< you NEED to be in bootloader
type in adb reboot bootloader and make sure you are in fastboot usb (select it if it's not already done for you)
then
fastboot flash boot boot.img
Click to expand...
Click to collapse
Sorry if I didn't mention that.
i was on fastboot USB.
showed fastboot USB on a red backround.
I tried once again with both methods and i recieved another error message in the SDK methos:
error: cannot load 'boot.img': Unknown error
I attached file with step by step screen shot for the whole process (both methods).
Just thought...did you rename it boot.img? If so and file extensions are hidden then it will be boot.IMG.IMG so remove .IMG and it should work fine
Sent from my HTC One X+ using xda app-developers app
Make sure you installed HTC Sync (htc site) and the drivers will come with it. (you can later remove sync, drivers will stay)
Then enter fastboot trough vol down + power > choose fastboot ... plug your phone to PC and wait sec for driver install.
Make sure u see Fastboot USB in fastboot
Go prompt admin mode and go to your c:/fastboot map (put boot.img in there)
And type
Code:
fastboot flash boot boot.img
After that install recovery and rom and boot.
Lloir said:
Just thought...did you rename it boot.img? If so and file extensions are hidden then it will be boot.IMG.IMG so remove .IMG and it should work fine
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
WORKED!!!!!!!
Lloir YOU R the best!!
flashed the kernel
then followed instruction how to backup and flash from the TWRP
running joyfully your CM10 ROM right now.
It's Amazing!
Thank you thank you thank you!!
Okay, here we go. I am new to rooting and I have already unlocked the bootloader on my device (HTC Evo 4G LTE). It still has S-on. After I unlocked my bootloader, I continued on to flash TWRP Recvovery onto my phone using fastboot. My phone does not have an SD card. However, no matter how many times I download the newest version of TWRP or rename the file or change the directory in the command prompt...it says "error: cannot load recovery image". When I attempt to restart in recovery mode, I get this red triangle with an explanation point! I have tried over and over again, but since I cant flash this recovery, i have an unlocked bootloader for practically no reason. I need to get past this step in order to start flashing custom ROM's. I even used RegawMOD EVO 4G LTE Rooter. After i click "Root Me" it puts my device into fastboot and attempts to submit the unlock token to HTCDev.com even though I already did that! I am stuck :crying:
Go here and download the recovery to your ADB tools folder.
http://techerrata.com/file/twrp2/jewel/openrecovery-twrp-2.3.3.0-jewel.img
You can rename the file "twrp" without the quotation marks. Make sure the file doesn't have an extra img extension or it won't work. Once you do this reboot your phone to the bootloader. Connect your phone to your computer via USB cable. You should see the word Fastboot in red highlights change to Fastboot USB. Open up ADB and type "fastboot flash recovery twrp.img" (without quotation marks) then press enter. At this point TWRP recovery should be installed on your phone.
If these are the steps you have followed, disregard.
The advice is free....the bandwidth, not so much
Thank You for Replying Good Sir!
1)when i download any twrp file and try to open it on my computer, it says "the disc image file is corrupted"
2)when i attempt to open ADB , it flashes up then off. I cant read what it says
3)i entered the command in the command prompt and it just says waiting for device
gratealex8 said:
1)when i download any twrp file and try to open it on my computer, it says "the disc image file is corrupted"
2)when i attempt to open ADB , it flashes up then off. I cant read what it says
3)i entered the command in the command prompt and it just says waiting for device
Click to expand...
Click to collapse
Download this extract it to your desktop and run your commands from that folder by pressing shift and right clicking on an empty spot inside the folder and choose open cmd window here.
There is a readme.txt inside follow the instructions on how to fastboot flash twrp (Copy and paste is the easiest way to do this that way there are no typo's)
Use v2.4.1.0 if you are on the latest OTA
Use v2.3.1.0 otherwise
idk whats wrong!!
I did exactly as you said, yet the command prompt just says waiting for device. I'm not sure what to do anymore because regardless of following these instructions, I CANT FLASH TWRP RECOVERY TO MY PHONE. I believe the problem is with my phone but Im running out of options. its beginning to look like I unlocked my bootloader for nothing :/
gratealex8 said:
I did exactly as you said, yet the command prompt just says waiting for device. I'm not sure what to do anymore because regardless of following these instructions, I CANT FLASH TWRP RECOVERY TO MY PHONE. I believe the problem is with my phone but Im running out of options. its beginning to look like I unlocked my bootloader for nothing :/
Click to expand...
Click to collapse
Try these drivers.Install them and reboot your PC once rebooted go to add/remove programs and delete HTC Sync
Getting frustrated
bigdaddy619 said:
I did this and again all I get in the command prompt is waiting for device. No more ideas huh?
Click to expand...
Click to collapse
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
also to note....you dont have to install linux to get s-off....if you follow my guide you can do it straight from a live disk rather than installing it....so it wont erase or mess up your windows partition at all
Solved!
Thank you, Mjones, I finally got it! I knew it was much easier than I was making it out to be. I was missing the kernel! Yeah, a crucial part in the process, I know
I first ran CWM and flashed the ROM over and ran the .zip through recovery (which I couldn't understand at first as I could never find it in the directory) but the installer would only go 50% and would fail... makes sense why now lol
I later flashed TWRP and backed up again after recovering from the fail. I flashed over the kernel and voila! So simple... Had to slap myself.
Thanks again! Case solved.
REV3NT3CH, that is sweet!! I have been hoping there is a way to gain s-off with Windows. I have 7 at work and 8.1 (which I can't get anything to work on) at home. I actually have to focus on work today haha so I'll look into the method and try it out tomorrow if I can. Thanks for all of the help.
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Sorry, don't know anything about that phone.
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Did you try this first? (Right from Moto's site)
Perform a factory reset using external keys
1. Power off the phone, press and hold volume down button, press power button
2. Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", then press Vol up key
3. Wait for the "triangle ! / Android" screen then go on to step 4
4. Press both Vol up and Vol down key simultaneously. A menu will come up
5. Tap on Vol down key until "wipe data/factory reset" is highlighted, and tap Power key. Another Confirmation screen will come. Tap on Vol down key until coming to Yes and tap Power key
6. After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power key
7. Phone will reboot to initial setup screen.
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
not working
hariom.gupta11 said:
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
Click to expand...
Click to collapse
not working on my 4c. write successful but when reboot is completed it goes to previous state.
"the user data partition can no longer be used"
zb602kl_x00tdb
L0RDZ3RO said:
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
Click to expand...
Click to collapse
I have same problem on asus zenfone max pro m1 I bought it online said used and now working
can't boot into recovery.
can't boot into system.
Only EDL Mode and Fastboot Mode, but fastboot is Locked whic I cant unlock because I cannot boot into system to toggle USB Debugging and allow OEM unlocking
Qualcomm is harder to flash than MTK that can use SP FlashTool.
on this I use QFIL but keeps "sahara error". I tried searching and try moving firmware file to bin but no Luck. I'm currently trying different version of QFIL Tool.
If it FAILS my only HOPE is to use MUT-QCfire which will Require a "SmartCardReader" Which is a bit pricey and I don't even know if it will work on my device.
I am using TWRP to install a flash (Because the Phone is getting stuck a HTC's logo) and after I finished flashing it, I reboot and it gets me back to TWRP so it's not working. What to do?
How did you install TWRP on your device? it must be Fastboot-ADB folder where you have already copied the recovery .img file. Open the command window in this folder by Shift and Right click combo and type the following command with the part of command of your recovery image file:
fastboot flash recovery(yourRecoveryFileName) and then type .img at the end of the command – hit Enter
The process of installing of your chosen custom recovery will now start on HTC One Max.
Hi all,
I appear to have done something wrong when flashing my device with boombox and flashing twrp. I seem not to be able to access recovery so I can update my boombox rom. I have tried button combinations, I have tried fastboot boot twrp.img in bootloader which just reboots my system, I have tried booting directly from home screen using adb which registers an error and I have tried re-flashing but unfortunately I cannot access recovery.
Any way I can get into recovery without erasing my data?
Jonnibravo said:
Hi all,
I appear to have done something wrong when flashing my device with boombox and flashing twrp. I seem not to be able to access recovery so I can update my boombox rom. I have tried button combinations, I have tried fastboot boot twrp.img in bootloader which just reboots my system, I have tried booting directly from home screen using adb which registers an error and I have tried re-flashing but unfortunately I cannot access recovery.
Any way I can get into recovery without erasing my data?
Click to expand...
Click to collapse
If you're rooted, give the reboot recovery app you installed after bootloader unlock root privileges.
If not then use the exact same PC ADB commands to boot to TWRP like during bootloader unlock.
I'm confused why you mention flashing TWRP after Boombox. Surely you didn't do that. You already had TWRP.
I am rooted, Recovery reboot just reboots the phone, I have tried to get into twrp by reinstalling but again does the same things just reboots the system after the corruption warning screen. I've also tried to install from the bootloader with the fastboot boot twrp.img command but it simply says waiting for device.
Sorry turns out I was flashing the wrong file from another tutorial, I was flashing 3.1.1 instead of 3.2.1
Jonnibravo said:
Sorry turns out I was flashing the wrong file from another tutorial, I was flashing 3.1.1 instead of 3.2.1
Click to expand...
Click to collapse
Then you didn't follow my bootloader unlock and root guide. I never mention that other TWRP, much less link to it.
You're going to have to load into Download mode and use fastboot commands, but you say you couldn't get past flashing TWRP.
Uninstall the LG Mobile Driver if you have them, then reinstall.
1st, reboot into OS, then open up Device Manager and change view to Show hidden devices. You should see a new category named 'ADB Interface' and underneath that 'Fastboot Interface (Google USB ID)'.
If not, you will also see 'ADB Device' for Other Devices category:
right click that to update driver software ---> Browse my computer for driver software ---> Let me pick from a list... ---> Show all Devices ---> Have Disk ---> Browse ---> C:\Program Files (x86)\LG Electronics\LG Mobile Driver ---> 'lgandbus' ---> 'LGE ADB Mobile Interface'
Download adb/fastboot software, download Joan TWRP 3.2.1 img file and place it in adb/fastboot folder, then send your phone into Download mode:
Open up cmd and type the following after changing directory to Adb/fastboot folder: fastboot devices (see if your device is there), fastboot flash recovery TWRP.img or (whatever file is named).img, then fastboot boot TWRP.img or (whatever file is named).img