Hi.
The last couple days, I unlocked my bootloader to install the phh-treble rom and experiment with this phone but the *unlocked bootloader* message every time that I power up my phone, is very annoying.
So I ask if anyone knows which firmware to install to my phone so I can lock the bl and receive otas as normal
Thanks
t-shock said:
Hi.
The last couple days, I unlocked my bootloader to install the phh-treble rom and experiment with this phone but the *unlocked bootloader* message every time that I power up my phone, is very annoying.
So I ask if anyone knows which firmware to install to my phone so I can lock the bl and receive otas as normal
Thanks
Click to expand...
Click to collapse
It's just a guess, but i think that you should flash an original "system. img" with fastboot and then reset you device.
You can use Huawei Unpacker to get your system.img from a FullOTA firmware (you can download it with Firmware Finder).
Pretoriano80 said:
It's just a guess, but i think that you should flash an original "system. img" with fastboot and then reset you device.
You can use Huawei Unpacker to get your system.img from a FullOTA firmware (you can download it with Firmware Finder).
Click to expand...
Click to collapse
Thanks for that
But having used this guide ( https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814 ) I guess it changes more that the system
t-shock said:
Thanks for that
But having used this guide ( https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814 ) I guess it changes more that the system
Click to expand...
Click to collapse
When you go to recovery now, is it Huawei recovery or some aosp recovery?
If Huawei you should be able to use that same guide to go back to stock. You just need to download the Firmware your phone came with (Ex. L29 C432), then update using the guide. Or you could rebrand and install fw.
ante0 said:
When you go to recovery now, is it Huawei recovery or some aosp recovery?
If Huawei you should be able to use that same guide to go back to stock. You just need to download the Firmware your phone came with (Ex. L29 C432), then update using the guide. Or you could rebrand and install fw.
Click to expand...
Click to collapse
It is the Huawei recovery but the weird thing is that it flashes another recovery and kernel before at the fastboot mode.
Anyhow, I just wonder, if I go back to the 127 (following the method above) which is verified thru IMEI, will I be able to get OTAs?
Or
Which is the correct method of restoring the full stock rom in order to have OTAs and lock the BL
t-shock said:
It is the Huawei recovery but the weird thing is that it flashes another recovery and kernel before at the fastboot mode.
Anyhow, I just wonder, if I go back to the 127 (following the method above) which is verified thru IMEI, will I be able to get OTAs?
Or
Which is the correct method of restoring the full stock rom in order to have OTAs and lock the BL
Click to expand...
Click to collapse
Yes, you will get OTA.
If you install a full firmware everything will be replaced (though you can keep bootloader unlocked, but you're asked when you run repack so select yes ("Lock bootloader?").
The "correct" ways would be: HWOTA8, Dload (if available for your firmware), FunkyHuawei (paid).
ante0 said:
Yes, you will get OTA.
If you install a full firmware everything will be replaced (though you can keep bootloader unlocked, but you're asked when you run repack so select yes ("Lock bootloader?").
The "correct" ways would be: HWOTA8, Dload (if available for your firmware), FunkyHuawei (paid).
Click to expand...
Click to collapse
Thanks a lot
Just one last question, if I only have unlocked bootloader and no root , will AI "brake"?
Thanks
t-shock said:
Thanks a lot
Just one last question, if I only have unlocked bootloader and no root , will AI "brake"?
Thanks
Click to expand...
Click to collapse
It shouldn't. And it works again with root. Apparently something broke in SEPolicy, but mankindtw fixed it in his pre-rooted ramdisk. Though, we can install Magisk "normally" now (as a package through recovery) so it shouldn't be a problem anyway SuperSU should install in a similar way too, if one would take the time to make it. I prefer Magisk though
Related
Someone else was making it but wouldn't release it, so I made one myself.
This will not work with internal storage if it's encrypted, but otherwise should be good enough to do things like rebranding/changing oeminfo and so on.
For P10:
https://drive.google.com/open?id=0B6ox6M5Lb2JYZklQSnZZbHA0ZUk
Note that this is a one-off release that I don't plan to maintain.
i have a huawei p10 demo.
do not work on this device
i need to flash even boot.img?
darckreign1984 said:
do not work on this device
i need to flash even boot.img?
Click to expand...
Click to collapse
New version uploaded. Original one was not for P10, sorry. Please try new one.
No need to flash boot.img
succesfull boot in twrprecovery
duraaraa said:
New version uploaded. Original one was not for P10, sorry. Please try new one.
No need to flash boot.img
Click to expand...
Click to collapse
thanks
lets rty to unbrand.
pls any method to find device id in huawei mate 9 with a bricked device? fastboot acces and erecovery
darckreign1984 said:
thanks
lets rty to unbrand.
pls any method to find device id in huawei mate 9 with a bricked device? fastboot acces and erecovery
Click to expand...
Click to collapse
TWRP alone is not enough to rebrand. You need a way to flash the firmware from the new region. Unfortunately, I can't tell you how to debrand on XDA, as it involves paid services and would be against the rules. You'll have to figure out for yourself.
duraaraa said:
TWRP alone is not enough to rebrand. You need a way to flash the firmware from the new region. Unfortunately, I can't tell you how to debrand on XDA, as it involves paid services and would be against the rules. You'll have to figure out for yourself.
Click to expand...
Click to collapse
thanks anyway
Please, how to unlock bootloader?
matata86 said:
Please, how to unlock bootloader?
Click to expand...
Click to collapse
enter here
http://emui.huawei.com/en/plugin/hwdownload/download
and you have to make a account. the unlock bootloader, you have to wite all the data
darckreign1984 said:
enter here
http://emui.huawei.com/en/plugin/hwdownload/download
and you have to make a account. the unlock bootloader, you have to wite all the data
Click to expand...
Click to collapse
OK, i unlocked bootloader. I flashed TWRP. Recovery boot ok. But every if i go to recovery - show forst screen (language select atd.) I flashed Super- SU 2.79, but flashing abort. Boot image not found... Any idea?
matata86 said:
OK, i unlocked bootloader. I flashed TWRP. Recovery boot ok. But every if i go to recovery - show forst screen (language select atd.) I flashed Super- SU 2.79, but flashing abort. Boot image not found... Any idea?
Click to expand...
Click to collapse
i think you meed to activate developer in phone menu.
for the moment my phone its stuck in bootloop. i dont have any twrp backup to restore
You are installing custom Recovery and unlock your bootloader.. is there any custom rom out yet?
The stock 20S firmware for X722. Now it is the only firmware prepared for unlocking bootloader.
Archive consists of update.zip, firmware for flashing via fastboot with necessary scripts and instruction in Chinese.
How to back to 20S firmware from bootable 26S:
1. Install via stock recovery update.zip from archive. Your new firmware will be 001D.
2. Unlock bootlader.
3. Install via fastboot 020S firmware by open .bat file with chinese symbols.
4. Now you are on stock root-friendly multilang firmware without chinese apps.
Enjoy.
MOD EDIT: dead url removed
P.S. Because of little information about this phone, please, write here about successful and unsuccessful attempts
At least one person says that it has worked, but according to the updater-script of the ROM itself is not the 20S version.
https://forum.xda-developers.com/le...mods/unlock-bootloader-rom-26s-t3654083/page6
The ROM is identified as WIXCNFN5800106140D
See if someone installs it does capture information from the phone.
Greetings.
F.J.V said:
At least one person says that it has worked, but according to the updater-script of the ROM itself is not the 20S version.
https://forum.xda-developers.com/le...mods/unlock-bootloader-rom-26s-t3654083/page6
The ROM is identified as WIXCNFN5800106140D
See if someone installs it does capture information from the phone.
Greetings.
Click to expand...
Click to collapse
I had the 26 s installed.
I screamed the Roma,
I installed update.zip through the 26s recovery stock.
I ran the bootloader for the 720
I ran the root.
I uninstalled Chinese applications.
ste73 said:
I had the 26 s installed.
I screamed the Roma,
I installed update.zip through the 26s recovery stock.
I ran the bootloader for the 720
I ran the root.
I uninstalled Chinese applications.
Click to expand...
Click to collapse
Look in the phone information that EUI version is.
Settings-> Phone Information
Greetings.
F.J.V said:
Look in the phone information that EUI version is.
Settings-> Phone Information
Greetings.
Click to expand...
Click to collapse
https://imageshack.com/i/poNiEJrDj
ste73 said:
https://imageshack.com/i/poNiEJrDj
Click to expand...
Click to collapse
Thank you.
My data is confirmed.
ROM Name: WIXCNFN5800106140D
EUI version: 5.8.001D (Dev)
Greetings.
F.J.V said:
Thank you.
My data is confirmed.
ROM Name: WIXCNFN5800106140D
EUI version: 5.8.001D (Dev)
Greetings.
Click to expand...
Click to collapse
Thank you for providing the rom
ste73 said:
Thank you for providing the rom
Click to expand...
Click to collapse
I only provide data.
The ROM is provided by Batyan
Greetings.
Ok, but the zip file with this firmware also include instruction in Chinese, and flashing update.zip is only the first step. The second is to flash files via fastboot. Firmware will become 20S after flashing those files, I suppose
Why is my phone EUI 5.9? I bought it from Banggood and I know it's not an original firmware, but it's weird todo find a stock firm with older version of EUI.
bayron_olaff said:
Why is my phone EUI 5.9? I bought it from Banggood and I know it's not an original firmware, but it's weird todo find a stock firm with older version of EUI.
Click to expand...
Click to collapse
What number of firmware do you have? 26S? Can you unlock bootloader?
Batyan said:
Ok, but the zip file with this firmware also include instruction in Chinese, and flashing update.zip is only the first step. The second is to flash files via fastboot. Firmware will become 20S after flashing those files, I suppose
Click to expand...
Click to collapse
Can be.
We will have to wait for someone to try fastboot to confirm.
Greetings.
ste73 said:
I had the 26 s installed.
I screamed the Roma,
I installed update.zip through the 26s recovery stock.
I ran the bootloader for the 720
I ran the root.
I uninstalled Chinese applications.
Click to expand...
Click to collapse
Can you make a how-to please?
Sorry for my English, I've been following the thread, just so I can understand. I'm in the factory 20s, can I unlock the bootloader (via x720) do root and twrp direct? or do I have to use this 20s baytan rom modified?
Batyan said:
What number of firmware do you have? 26S? Can you unlock bootloader?
Click to expand...
Click to collapse
Hello, as I said before I bought my x722 from Banggood and this model comes with this firmware:
WIXCNFN5902005041S
EUI 5.9.020S
But I know it's a modified firmware because it doesn't have any chinese apps or LETV video services, nor can update my firmware.
I haven't tried to unlock its bootloader yet, as I know there aren't any custom roms for this model.
despaigne said:
Sorry for my English, I've been following the thread, just so I can understand. I'm in the factory 20s, can I unlock the bootloader (via x720) do root and twrp direct? or do I have to use this 20s baytan rom modified?
Click to expand...
Click to collapse
Yes, 20S is unlocking-friendly rom
You can install twrp
bayron_olaff said:
I haven't tried to unlock its bootloader yet, as I know there aren't any custom roms for this model.
Click to expand...
Click to collapse
There is one custom rom on Leeco unofficial forum, but I have with it soft brick. But soon it will be much more custon roms (at least EUI based)
By the way, here's what the chinese README says:
1. Phone must be charged, plug the USB data cable to the computer, swipe down the notification bar, replace "only charge" by "storage MTP"
2. First, move the folder UPDATE.ZIP to the phone's internal storage
3. Open File manager, search UPDATE.ZIP and press on it, next select update system
4. Phone must restart automatically to start the update process, wait until the progress bars finishes,phone will restart, then turn off the phone, next press volume down + power button to enter fastboot mode, open “第二步多刷_音量下键+开机键.bat”on your PC when the phone is on fastboot mode, the phone will restart again, update completed.
Batyan said:
Yes, 20S is unlocking-friendly rom
You can install twrp
Click to expand...
Click to collapse
Many thanks Batyan. And after the twrp I do root (x720) and I do not run the of brick risk right (within a normality I already know)? Dying of fear kkk. you are the man
despaigne said:
Many thanks Batyan. And after the twrp I do root (x720) and I do not run the of brick risk right (within a normality I already know)? Dying of fear kkk. you are the man
Click to expand...
Click to collapse
Any manipulations without flashing 26S are avaliable
Hi, i have new honor 9, as i open the phone , it is upgrade to B183 Version.
i need to automatic call recorder and i have found a zip.file to flash whit twrp. So i want install twrp and root...
The first time i download TWRP 3.1.1-1 and Supersu 2,82, i install all whit my zip file per automatic call recorder...
all is ok, twrp, i have root and call recorder working,,, but...
I lose navigation buttons and Camera Flash.
for navigation buttons isnt a problem... i can use only Home button ( i had a Meizu phone before but...
I need camera flash ! it have to work.
so....
for have again all working , i used the Rebrand Guide of HWOTA, whit B120 all work again.
cannot have more OTA upgraded but i think because i just had download them whit my imei.... ok i will wait new update for verifyng it.
I can use Finder Firmware Huawey for have manual upgrade.
Now i'm again in b183.
how can I do now for have a valid twrp or valid method for root phone? Because i read that same people have them..... but i think have reroll to b120 almost 50 time whithout always same results....
oh oh, i see now that i have wrong section. moderator can you move?
SOLVED!
After many time i can have all working now:
Starting to B183 firmware whit button and flash not working:
Step 1) Rollback on B120, downgrading by flashing with hwota scripts, this post . option are 2 (directory upgrade) and 1 (same brand). with this you will have working buttons
Step 2) Update to B183 (FF full-ota files timestamped 2017.12.28)
Step 3) Unlock the bootloader.
Step 4) Install the TWRP-3.1.1.1_120_130_170.img from this thread.
Step 5) Install Supersu SR5
WARNING: you have to be carefull when go in TWRP recovery: do not modify system data at twrp's boot, then rebooted choosing not to install twrp at twrp's exit prompt. ( dont'know if it is important... but so it work
so you will have a b183 firmware whit all working: root, button and flash.
please, reply if this work for you.
Add more infos about FF .
In updater system , no update available after roolback to B120.
Need to use Firmware Finder Huawei on Playstore.
1-Choose the desired full version
2-Check Firmware access for be sure not make mistakes.
3-Get an update throught DNs , register update and change Dns .
4- Come back to updater and check update .
angelobiz said:
Step 2) Update to B183 (FF full-ota files timestamped 2017.12.28)
Click to expand...
Click to collapse
In this step, did you do it with the HWOTA tool or with fully stock B120 inside the system?
Zuzler said:
In this step, did you do it with the HWOTA tool or with fully stock B120 inside the system?
Click to expand...
Click to collapse
While on stock B120 use the android application Huawei Firmware Finder to upgrade:
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/amp/
But you could try to test to use HWOTA to upgrade from b120 to b183 and then report here?
I already tried upgrading to B182/183 with HWOTA. I was on B120 and did a B182 and B183 upgrade. I was left with no capacitive keys and no flash. Camera was working however.
Just right now downloading B183 on top of a new locked B120 with the Firmware Finder, will report back.
However, it's very inconvenient to update the system this way if you have an unlocked bootloader and are rooted. I mean, downgrade to B120, twice within HWOTA, upgrade within the system and then AGAIN re-unlock the bootloader which results in a factory reset - come on...
Does it also work with Magisk or only with SuperSu?
SuperSu already is nice, but the additional benefits like would be nice to have, especially passing SafetyNet.
Anyone still with missing navigation buttons? I might have a solution that does not require flashing firmware or doing factory reset
zxz0O0 said:
Anyone still with missing navigation buttons? I might have a solution that does not require flashing firmware or doing factory reset
Click to expand...
Click to collapse
Mind telling us?
For me everything worked fine by downgrading to B120 and then updating B183 through the OS.
Zuzler said:
Mind telling us?
For me everything worked fine by downgrading to B120 and then updating B183 through the OS.
Click to expand...
Click to collapse
Seems the problem is that the touch_key firmware is not flashed properly. I modified the TWRP recovery to include the firmware. After I rebooted once into the custom TWRP the buttons worked again.
zxz0O0 said:
Seems the problem is that the touch_key firmware is not flashed properly. I modified the TWRP recovery to include the firmware. After I rebooted once into the custom TWRP the buttons worked again.
Click to expand...
Click to collapse
Good. This might be a breakthrough. Could you please share a step by step guide what to do? Thanks.
zxz0O0 said:
Seems the problem is that the touch_key firmware is not flashed properly. I modified the TWRP recovery to include the firmware. After I rebooted once into the custom TWRP the buttons worked again.
Click to expand...
Click to collapse
good, can you share your modified TWRP recovery???
the solution not work if you do different. you have to downgrade to B120 to HWOTA whit file of its post. After have to upgrade to B183 whit FFH whit locked bootloader
ang stock recovery, after install twrp and supersu.
i dont know why, but so it work.
angelobiz said:
good, can you share your modified TWRP recovery???
the solution not work if you do different. you have to downgrade to B120 to HWOTA whit file of its post. After have to upgrade to B183 whit FFH whit locked bootloader
ang stock recovery, after install twrp and supersu.
i dont know why, but so it work.
Click to expand...
Click to collapse
It would be a good thing.
Edit : As we are all trying to make your device 100% functional with root.
Here is a link for a Su Emui , not testes yet. Work on the mosty Huawei devices
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
http://www.mediafire.com/file/pn2pv1rqih1ug81/SuperSU-v2.82-EMUI5-SELPermissive[1].zip
https://androidfilehost.com/?fid=673956719939815322
I had used this version and it work
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
zxz0O0 said:
Seems the problem is that the touch_key firmware is not flashed properly. I modified the TWRP recovery to include the firmware. After I rebooted once into the custom TWRP the buttons worked again.
Click to expand...
Click to collapse
Can you provide details?
I wonder if we can pull the touch_key firmware from a working B120 firmware and flash over a later version?
angelobiz said:
I had used this version and it work
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Click to expand...
Click to collapse
Now i'm ok .
I used the good twrp and sideloaded Supersu.sr3 .
All buttons and flashlight work nice
zxz0O0 said:
Seems the problem is that the touch_key firmware is not flashed properly. I modified the TWRP recovery to include the firmware. After I rebooted once into the custom TWRP the buttons worked again.
Click to expand...
Click to collapse
So did your twrp fix touch_key once broken?
zxz0O0 said:
Seems the problem is that the touch_key firmware is not flashed properly. I modified the TWRP recovery to include the firmware. After I rebooted once into the custom TWRP the buttons worked again.
Click to expand...
Click to collapse
Can you please share your modified TWRP recovery, so we can test on our phones?
This issue is driving me crazy.
Thanks :good:
Since there's no thread about it yet (in here then), I'll just make this one so that there won't be any more confusion for TWRP links.
Do keep in mind that if you use the official bootloader unlock method, you won't receive OTA updates anymore from Asus.
Have a great day and happy flashing
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w
I'm using more current Twrp and magisk 16 I do not know which is preventing the biometric reader
rinampa said:
I'm using more current Twrp and magisk 16 I do not know which is preventing the biometric reader
Click to expand...
Click to collapse
At the time, I do not know either what is causing this. Because the Oreo rom is rather bugged a bit. (Lower audio, wifi not turning on once it's off and now this)
What twrp should i use for nougat version?
HnsAlczr said:
What twrp should i use for nougat version?
Click to expand...
Click to collapse
Since it's nougat, preferably use 20180304. Once on Oreo, you can flash the latest.
+)KEV1N(+ said:
Since it's nougat, preferably use 20180304. Once on Oreo, you can flash the latest.
Click to expand...
Click to collapse
After i flash twrp thru adb reboot it on twrp works properly but when i reboot to system im stuck at Asus Logo, did i do something wrong on the process?
HnsAlczr said:
After i flash twrp thru adb reboot it on twrp works properly but when i reboot to system im stuck at Asus Logo, did i do something wrong on the process?
Click to expand...
Click to collapse
Did you upgrade your system to Oreo? If so, did you have substratum themes on?
I wonder when he opens the twrp he asks for the PIN number , password or something?
How do I unlock the ZenFone 3 Zoom bootloader on Android Oreo ?
ZueiraBR said:
How do I unlock the ZenFone 3 Zoom bootloader on Android Oreo ?
Click to expand...
Click to collapse
https://www.asus.com/br/Phone/ZenFone-3-Zoom-ZE553KL/HelpDesk_Download/,Select the android operating system, Versão UnlockTool_2018_0629(android O)
2018/06/29740.7 KBytes.
Read the instructions carefully.
+)KEV1N(+ said:
Since there's no thread about it yet (in here then), I'll just make this one so that there won't be any more confusion for TWRP links.
Do keep in mind that if you use the official bootloader unlock method, you won't receive OTA updates anymore from Asus.
Have a great day and happy flashing
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w
Click to expand...
Click to collapse
Hi all, does not work with WW-80.30.76.10 . Help me please
personal I flashed the twrp by adb fastboot soon then I entered i REBOOTED-SYSTEM by own twrp! but when I turned it off and put it in recouvery mode (twrp) it goes into the original factory recovery! Does anyone know the solution ??
Delaias1995 said:
personal I flashed the twrp by adb fastboot soon then I entered i REBOOTED-SYSTEM by own twrp! but when I turned it off and put it in recouvery mode (twrp) it goes into the original factory recovery! Does anyone know the solution ??
Click to expand...
Click to collapse
Installed twrp by fastboot goes into recovery in twrp restart the always by twrp.
After updating to twrp new version I can not update more firmware, I have to download recovery stock
I am having problems in twrp I can not install rom always error 7 in this last update how to solve?
Please, I appreciate your help.
+)KEV1N(+ said:
Since there's no thread about it yet (in here then), I'll just make this one so that there won't be any more confusion for TWRP links.
Do keep in mind that if you use the official bootloader unlock method, you won't receive OTA updates anymore from Asus.
Have a great day and happy flashing
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w
Click to expand...
Click to collapse
Is there any UN-OFFICIAL unlock method ? tks
Can someone help me? I can't find the correct version (or doesn't even exist) of twrp for my zenfone zoom s.
(UL-Z01H-WW-80.30.76.74)
Hi all.
Honor 9 with unlocked bootloader and FRP. I'm on 8.0.0.366, rooted via Magisk's modded ramdisk and stock recovery.
AFAIK Otas should not work anymore.
According to Huawei Firmware Finder, OTA update to .368 is available and approved for my IMEI.
I tried to upgrade putting main update.app file (from the full-ota-mf) in SDCARD\dload and booting in software update mode. Process fails with software update error at 5%.
Same with 367.
Furthermore there are multiple update.app in the downloadable files, how to flash all updates?
Is there a way to manually upgrade the phone without factory resetting it?
I would avoid installing a custom recovery, maybe in beta.
I'm also comfortable with bare fastboot, could I flash all needed images just skipping data?
Thanks
I had the same problem with update.
I used this tutorial https://forum.xda-developers.com/honor-9/how-to/how-to-root-honor-9-stf-l09c432b360a-t3778110 and flashed newest official ROM and Proto 8 kernel and it's awesome.
You can backup your data with hisuite and recover after fleshing. Worked for me very well.
procent said:
I had the same problem with update.
I used this tutorial https://forum.xda-developers.com/honor-9/how-to/how-to-root-honor-9-stf-l09c432b360a-t3778110 and flashed newest official ROM and Proto 8 kernel and it's awesome.
You can backup your data with hisuite and recover after fleshing. Worked for me very well.
Click to expand...
Click to collapse
Yep, I did the same. Got from b360 to b369 without factory reset. No issues.
1. TWRP 2. HuRUpdater with b369 from Firmware Finder 3. Magisk 4. Proto8 kernel+Split injector
All flashed from TWRP. TWRP flashed from fastboot. The same TWRP was renamed and put in the HuRUpdater folder.
sinraal said:
Yep, I did the same. Got from b360 to b369 without factory reset. No issues.
1. TWRP 2. HuRUpdater with b369 from Firmware Finder 3. Magisk 4. Proto8 kernel+Split injector
All flashed from TWRP. TWRP flashed from fastboot. The same TWRP was renamed and put in the HuRUpdater folder.
Click to expand...
Click to collapse
Just a bit curious....what is "split injector"??
Also HiSuite has option to upgrade and it worked for me.
badadam said:
Just a bit curious....what is "split injector"??
Click to expand...
Click to collapse
My bad, it is Spectrum injector and it is explained in the proto8 kernel thread.
sinraal said:
My bad, it is Spectrum injector and it is explained in the proto8 kernel thread.
Click to expand...
Click to collapse
Aha! OK, thanks for the reply
buteo said:
Hi all.
Honor 9 with unlocked bootloader and FRP. I'm on 8.0.0.366, rooted via Magisk's modded ramdisk and stock recovery.
AFAIK Otas should not work anymore.
Click to expand...
Click to collapse
OTA still should work with stock recovery, don't matter magisk
buteo said:
According to Huawei Firmware Finder, OTA update to .368 is available and approved for my IMEI.
I tried to upgrade putting main update.app file (from the full-ota-mf) in SDCARD\dload and booting in software update mode. Process fails with software update error at 5%.
Same with 367.
Furthermore there are multiple update.app in the downloadable files, how to flash all updates?
Click to expand...
Click to collapse
SDCARD\dload won't work with update.app from Full-ota-mf ; maybe the full-ota-mf-pv but it's not sure. I believe it only work in firmware mode (dload) with 'service repair firmware'.
buteo said:
Is there a way to manually upgrade the phone without factory resetting it?
Click to expand...
Click to collapse
normal ota(IF WORKING) or 'HuRUpdater + twrp'