hi every one, i have SM G530w with FRP problem, then i managed to bypass it with method found in youtube.. but when i install update thru OTA in 100% phone restart then suddenly phone not powering on. itried to connet it with pc it was detected in Qualcomm HS-USB QDLoader 9008 .
i heard and found here solution only for other variants, i cant apply it yo my phone since my phone cant enter download mode.
please guide me to revive my phone, can someone create debricked image file for my phone SM G530w and share here, any help is much appreciated thank you.
azzir04 said:
hi every one, i have SM G530w with FRP problem, then i managed to bypass it with method found in youtube.. but when i install update thru OTA in 100% phone restart then suddenly phone not powering on. itried to connet it with pc it was detected in Qualcomm HS-USB QDLoader 9008 . i heard and found here solution only for other variants, i cant apply it yo my phone since my phone cant enter download mode. please guide me to revive my phone, can someone create debricked image file for my phone SM G530w and share here, any help is much appreciated thank you.
Click to expand...
Click to collapse
I don't have this device but, the following threads may be helpful for what you need and don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=3422115
https://forum.xda-developers.com/showthread.php?t=3039167
https://forum.xda-developers.com/showthread.php?t=3530403
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Related
Hi Everyone,
I accidentally bricked my Oppo R5 by installing custom recovery. Now my phone just keeps on looping to the Oppo logo when restarting normally and I ca't access the recovery screen anymore. I tried some guides online and I was able to detect the “Qualcomm HS-USB QDLoader 9008” in Port COM 3 (no disk drive). I'm having a hard time looking for a proper guide for an Oppo R5. Can someone please tell me what flash tool should I use? Also if anyone will be kind enough to provide a step-by-step instructions on how to unbrick it including the unbrick tools... Thanks in advance!
hi send a massage to me on gmail or facebook and i will send solution to you
[email protected] :good:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine
Hello everyone,
after putting my phone in download mode, I flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch ON.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
eagle93 said:
hello everyone,
after putting my phone in download mode, i flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch on.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
Click to expand...
Click to collapse
i have this same problem
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
hai friends please help me.. my v10 is F600L but my friend by mis falshed with h961N that one dual sim and my F600L is single sim after flash no network so I tried to falsh back to F600L but my phone dead now after 90% flash.
only vibrate when i press power button
pc also not detecting anything like qhsusb or nothing
no download mode nothing
please any expert here help me...
hope any guy know about it
thanks in advance
Lg v10 h960a
Hi, I have the same problem, could you fix it? Thank you
I'm fighting with my fiends phone for over 3 days now, same as yours 960A. What i did is, try to heat the CPU up, rly rly high, and then try to turn on/fastboot it. If its not working, put it into freezer, and try to boot it inside a freezer. After 2 days i managed to get to fastboot few times, flashed stock firmware and right now im stuck on bootloop, but that is fixable. Just play around with heat, this phone is bricked anyways so dont be scared to take of heat sink and just blow your hair dryer straight to CPU.
xsoft said:
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Pls share the lg v10 H9012j.img file pls.
I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.
I wanted to install the lineage firmware on my lg g2 phone, the instructions said to downgrade the bootloader version after I encountered a problem that the phone does not turn on; boot certification verify. What to do as quickly as possible I want to solve the problem, in other guides on xda the pictures or links are not working, the specific id of my phone LG G2 D802, sorry for my bad English. and i have black screen boot. help plz. thank you
I want to add that when connected to a PC, it is defined as Qualcomm hs-usb Diagnostics 9006
and create more disk about 10-13 and 1 disk have files
adb dont work . fastboot too . help plz