System Configuration:
ROM: MIUI Global 8.1.25 | Beta
Kernel: 3.10.84-perf-g1cb6922
RAM: 2.00 GB
Device: Redmi note 3 (kenzo) with officially unlocked bootloader.
There are a number of tutorials and posts on XDA and YouTube with varying content. Some of them do not flash the boot.img, some of them do.
I will be using Ubuntu to flash using adb and fastboot. Any suggestions regarding that would be great.
Here are the steps I think I should follow ( from the posts I read):
1. Boot into fastboot.
2. Flash twrp-**.img
3. Boot into TWRP recovery.
4. Flash SuperSU
5. Flash Lazyflasher
Would that sequence cause any problem?
No problem, just flash twrp without prior boot.img flashing.
NealSchwartz said:
System Configuration:
ROM: MIUI Global 8.1.25 | Beta
Kernel: 3.10.84-perf-g1cb6922
RAM: 2.00 GB
Device: Redmi note 3 (kenzo) with officially unlocked bootloader.
There are a number of tutorials and posts on XDA and YouTube with varying content. Some of them do not flash the boot.img, some of them do.
I will be using Ubuntu to flash using adb and fastboot. Any suggestions regarding that would be great.
Here are the steps I think I should follow ( from the posts I read):
1. Boot into fastboot.
2. Flash twrp-**.img
3. Boot into TWRP recovery.
4. Flash SuperSU
5. Flash Lazyflasher
Would that sequence cause any problem?
Click to expand...
Click to collapse
yes the steps you're mentioned above is correct, you don't have to flash boot.img. just do the steps above.
Zasnizas said:
yes the steps you're mentioned above is correct, you don't have to flash boot.img. just do the steps above.
Click to expand...
Click to collapse
Thank you, bud! I have successfully install TWRP and also installed RR Rom on my Redmi Note 3. However, I have now lost root access.
I tried flashing the SuperSU.zip again, but to no avail. Where did I go wrong? How can I get root access back?
mistake37 said:
No problem, just flash twrp without prior boot.img flashing.
Click to expand...
Click to collapse
Thanks! Worked like charm. But I now lost root after installing RR custom Rom.
hey
I'm glad it worked, would you be so kind to post the links for those files you mentioned?
Also I'm on the latest stable Miui 9(snapdragon), will it work for me?
NealSchwartz said:
Thank you, bud! I have successfully install TWRP and also installed RR Rom on my Redmi Note 3. However, I have now lost root access.
I tried flashing the SuperSU.zip again, but to no avail. Where did I go wrong? How can I get root access back?
Click to expand...
Click to collapse
I recommend you to use magisk as a root access. To be safe you need to make clean flash your rom again , who's know maybe superSu already exists in your system but not appear on apps drawer by doing this your device will be cleaned from anything that can cause you into bootloop. First download magisk and magisk manager and place it in phone memory or SD card it's up to you and then reboot to TWRP ,wipe everything cache , dalvik cache , system and data then flash rom , gapps and magisk.. reboot. Search for magisk at XDA and download it.
Karanfil said:
I'm glad it worked, would you be so kind to post the links for those files you mentioned?
Also I'm on the latest stable Miui 9(snapdragon), will it work for me?
Click to expand...
Click to collapse
TWRP: Go to official website and download latest version
SuperSU: https://androidfilehost.com/?fid=385035244224394155
lazy-flasher: https://androidfilehost.com/?fid=457095661767111293
I am not sure if it would work, but I was also on MIUI 9 and it worked for me. Hopefully, someone else here will be able to let you know. AFAIK, it should work.
Zasnizas said:
I recommend you to use magisk as a root access. To be safe you need to make clean flash your rom again , who's know maybe superSu already exists in your system but not appear on apps drawer by doing this your device will be cleaned from anything that can cause you into bootloop. First download magisk and magisk manager and place it in phone memory or SD card it's up to you and then reboot to TWRP ,wipe everything cache , dalvik cache , system and data then flash rom , gapps and magisk.. reboot. Search for magisk at XDA and download it.
Click to expand...
Click to collapse
Thank you so much! It worked. I followed the steps, did a clean install and this time opted for Magisk. Awesome!
NealSchwartz said:
Thank you so much! It worked. I followed the steps, did a clean install and this time opted for Magisk. Awesome!
Click to expand...
Click to collapse
awesome.. glad it worked for you :good:
Related
Hi.
So the latest Cyanogenmod (honestly every update out of the CM update that came out on 9th Oct) builds do not work for my device. Whenever I try to boot up the device, the device just gets stuck on the bootup screen, that is the screen where you see the OnePlus logo and there's text in the lower part that says "Powered by Android", except that there is no "powered by Android" text seen.
What should I do in order to get things working?
Sorry to post this in the general thread, I am not yet high enough that I can post in the Android Development Thread.
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Loureiro said:
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Click to expand...
Click to collapse
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
sundhar88 said:
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
Click to expand...
Click to collapse
Alright thanks! If I face any problems I'll post again!
aamodjoshi23 said:
Alright thanks! If I face any problems I'll post again!
Click to expand...
Click to collapse
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
sundhar88 said:
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
Yup. You need to first flash the OOS recovery and then you need to flash the OOS 3.1.3 and then again the TWRP and then you need to flash whichever ROM you want to... Been there, done that. Real pain...
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Loureiro said:
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
You're a lifesaver dude! Thanks for the link!!
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Adesh15 said:
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Click to expand...
Click to collapse
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Install opx_recovery, flash 3.1.3 from recovery. After installed you can fastboot flash Blu sparks latest or Nichets twrp done.
Cretandus said:
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Click to expand...
Click to collapse
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Cretandus said:
Hi all,
I�¢??m having the exact same problem. I�¢??ve searched several forums, and have seen different solutions, but I�¢??m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don�¢??t want to make any mistakes. I�¢??m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I�¢??m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
What I did was, first of all, I took the backup using Titanium Backup and took a nandroid backup. Then I already had downloaded the files required, that is the BL zip file, the TWRP recovery, and the latest CM 13.0 build. Then I went to recovery > install and then located the BL and flashed it. Then I tried to flash the TWRP recovery but it didn't. Gave an error saying, "Unsuccessful" or something on those lines.
So I took that TWRP img file and copied it on my laptop. Then I went into the bootloader, which at first I thought was a bad idea since I just flashed the BL zip, then I flashed the new TWRP img file and went to recovery mode. And it had worked. So I flashed the CM 13.0 build too and then booted up the device, and it worked!
I guess that should help
aamodjoshi23 said:
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
Click to expand...
Click to collapse
I'm glad it worked for(don't forget to drop a thanks and a vote would be good too)
Also for next time,please search the forums before creating a thread.:angel:
Adesh15 said:
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Click to expand...
Click to collapse
Adesh15, it worked! Thank you very much!
Cretandus said:
Adesh15, it worked! Thank you very much!
Click to expand...
Click to collapse
Great !
In next 2 weeks my mi pad 4 LTE will come to me.
Could you tell me, how to root it by magisk?
1) unlock it by xiaomi (360 hours waiting)
2) flash twrp
3) flash magisk
4) reboot
That is all I need to do to get a root ?)
Tysovwik said:
In next 2 weeks my mi pad 4 LTE will come to me.
Could you tell me, how to root it by magisk?
1) unlock it by xiaomi (360 hours waiting)
2) flash twrp
3) flash magisk
4) reboot
That is all I need to do to get a root ?)
Click to expand...
Click to collapse
yes
Usually you don't even have to flash TWRP recovery if you want to keep original recovery, you can just boot it with "fastboot boot twrp.img".
Just a FYI, the latest magisk 17 has not been working for me. Magisk 16 works just fine.
I am on the xiaomi.eu rom
I'm on latest xiaomi.eu and Magisk 17.1 is working fine
bartekm01 said:
I'm on latest xiaomi.eu and Magisk 17.1 is working fine
Click to expand...
Click to collapse
After I flash magisk 17.1 , my mipad 4 can't use LTE
簡_OvO said:
After I flash magisk 17.1 , my mipad 4 can't use LTE
Click to expand...
Click to collapse
That's strange... I've using magisk on 6 device's and never had this sort of problems. Uninstall magisk and check if it's working again
@簡_OvO
On what Rom you have this problem with Magisk ?
I use Mi Pad 4 LTE and Magisk 17.1 on AOSP 8.1_v25 and everything works as it should.
Magisk it has nothing to do with Modem/Baseband he patching Kernel.
After using Magisk uninstaller or restore stock Kernel works for you LTE ?
bartekm01 said:
That's strange... I've using magisk on 6 device's and never had this sort of problems. Uninstall magisk and check if it's working again
Click to expand...
Click to collapse
After I flash again, it can work well
---------- Post added at 11:25 AM ---------- Previous post was at 11:22 AM ----------
Andro_Nicus said:
@簡_OvO
On what Rom you have this problem with Magisk ?
I use Mi Pad 4 LTE and Magisk 17.1 on AOSP 8.1_v25 and everything works as it should.
Magisk it has nothing to do with Modem/Baseband he patching Kernel.
After using Magisk uninstaller or restore stock Kernel works for you LTE ?
Click to expand...
Click to collapse
I use MIUI10.I cannot understand why.But after I flash magisk again,LTE works well.
Could you please explain where I find the mipad 4 boot image when using this method to patch it?
When choosing the option in magisk manager to patch boot image I have to search for the original boot image to patch as the app doesn't point staight to it...
Many thanks
@Tysovwik, I see you want keep miui. You have to block overwriting recovery by original one. I have seen option for it in twrp, but i have not tested it. The same you can have if you use special zip package.
Twrp has second option for auto install magisk 17.1, but i installed it from zip file (twrp labeled 20.12.2018 can have 18.0)
is this the best way to Root a Mi Pad 4 LTE ?
A long time ago someone said:
Tysovwik said:
In next 2 weeks my mi pad 4 LTE will come to me.
Could you tell me, how to root it by magisk?
1) unlock it by xiaomi (360 hours waiting)
2) flash twrp
3) flash magisk
4) reboot
That is all I need to do to get a root ?)
Click to expand...
Click to collapse
My plan is to follow this process.
Does anyone know if I still have to do step (1) ? or how that is done ?
Some noobie questions.
I already have TWRP installed in my Mi pad 4, and want to keep my original MIUI rom
To install Magisk what should I do next?
Just flash magisk from twrp?
Do I need to flash no-verify-opt-encrypt.zip?
Select any option of wipe in twrp before flashing Magisk?
If I get a bootloop can I just use Magisk unistaller?
soulgazer said:
Some noobie questions.
I already have TWRP installed in my Mi pad 4, and want to keep my original MIUI rom
To install Magisk what should I do next?
Just flash magisk from twrp?
Do I need to flash no-verify-opt-encrypt.zip?
Select any option of wipe in twrp before flashing Magisk?
If I get a bootloop can I just use Magisk unistaller?
Click to expand...
Click to collapse
I would wipe cache /dalvik cache before and wipe cache again after flashing. But yeah, just flash the magisk zip. You check in the settings under security if your device is encrypted, which I'm guessing it probably is already. In which case there's no need to flash no verify encrypt zip. Unless you want to have no encryption. In which case you'll have to start all over, complete format in twrp then flash magisk and no encrypt zip before first boot.
If you want to stay encrypted (assuming you are already), just flash magisk. I haven't done it in a while! So not sure if magisk manager will be installed with zip flash, if it's not there when you boot to system, just download and install latest magisk manager. You can always then download a root checker app from playstore to be sure all went well.
Good luck dude
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
ultramag69 said:
You have an old version of TWRP... You need to install a newer version - 3.2.3.2 - which you will find by doing a search for it here on XDA...
Just load img file on INTERNAL storage of phone, choose install>install image file> and click on recovery partition. After install go to home menu and restart recovery...
If you still have issues then download magisk again, it may be corrupt...
Cheers....
Click to expand...
Click to collapse
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
fajniejest said:
First of all, I'm not going to install TWRP - I want only to boot into TWRP once for flashing Magisk's ZIP.
Second - in this guide OP says that Unofficial TWRP should be used. I've tried v1 and v2 TWRP from the guide. So which other TWRP should I try to boot into? This? https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-x-t3836241
Click to expand...
Click to collapse
I am new on this forum (pocophone) and i seee how messed up it is. You should definitly use official twrp
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
fajniejest said:
Hello. I was going through this guide --> https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
I've got a problem. I've unlocked bootloader and next I'm booting correctly to TWRP, but when I try to flash any zip of magisk manager I receive an error: "invalid zip file format". I'm using TWRP 3.2.3-0 from first post in guide - I was trying to use both 20181012 and 20181211 versions and no result - still the same error. What can I do? I'm using POCOPHONE F1 with MIUI Global 10.2.3.0
Click to expand...
Click to collapse
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
tnsmani said:
what are you trying to flash? If it is Magisk Manager, it is in apk format and you just click it to install. No TWRP.
If it is Magisk, which version are you trying to flash? Try 18.1. And preferably download any file from its source.
EDIT: If Magisk v18.1 is also not flashing, try Magisk Canary version. Some phones need that.
Click to expand...
Click to collapse
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
fajniejest said:
I'm trying to flash zip with Magisk Manager, as it is said in guide. I know that I can have an apk, but is it enough to just install apk without having custom recovery (but having bootloader unlocked)?
I will try it if nothing from "my" guide will work, because I really don't want to lose my storage (I see that in this guide installing Magisk needs it)
Click to expand...
Click to collapse
Well Here is how i managed it to work. After i unlocked my bootloader i launched twrp and flashed beta magisk 19.0 (not latest anymore because 19.1 just today showed up) then i reminded that i forgot about DisableForceEncryption_Treble_v18.0.zip so i flashed iit and after it flashed again magisk 19.0, after reboot it everything was fine
GrecoNeoV said:
You don't need official TWRP, but I think you need to install Disable Force Encryption, before installing the Magisk app
This thread will be more helpful.
Click to expand...
Click to collapse
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'flashboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
The command is 'fastboot boot twrp-<version>.img'
tnsmani said:
The command is 'fastboot boot twrp-<version>.img'
Click to expand...
Click to collapse
Thanks for the correction. I really don't know where I got flashboot from.
Cheers!
guhvanoh said:
There is no need to flash DFE. I've unlocked my bootloader, installed TWRP, flashed PE and Magisk 19.0 all without DFE which I don't need.
@OP, you need TWRP version 3.2.3-2 at a minimum, which you can boot using 'fastboot boot twrp-<version>.img' . Then flash Magisk. You'll
need at least version 18.1.
HTH
Click to expand...
Click to collapse
So, to make it clear (and to not brick my poco... ):
1. I should use TWRP image from this link --> https://twrp.me/xiaomi/xiaomipocophonef1.html...
2. ...and I don't need to replace my recovery - just booting it once (as You described) is enough.
3. I should flash Magisk's ZIP, not MagiskManager's ZIP or Magisk.apk
4. No more flashing, clearing data and other operations needed.
Am I right?
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
guhvanoh said:
1 - Yes.
2 - That's down to you. I have TWRP recovery installed and I have the app as well.
3 - You need to flash Magisk and install the apk. See this link for instructions on installing Magisk.
4 - Yes, you need to clear data, wipe dalvik and cache when installing a new ROM. If updating a current rom, I just wipe dalvik & cache.
HTH
Click to expand...
Click to collapse
Big thanks! Finally dealt with it. So grateful for Your help. :victory:
Dearminder said:
Hey I know its not a thread related but if u install magisk can u tell me if you have 60fps screen recoding option? Because I already Dirty flashed rom once and nothing changed still cant unlock it :/
Click to expand...
Click to collapse
Yes, I do. I've not tried it though...
i have rooted my device miui 10 with TWRP recovery, my device downloaded miui 11 (belekota) and wait to install
can i install new update 11 or will stuck in problem and lost all my app's and data ??
I updated mine...all data remained .....lost root though
fmkingpin said:
I updated mine...all data remained .....lost root though
Click to expand...
Click to collapse
what about TWRP recovery, did it back again to stock recovery or with the same TWRP recovery ??
Reverted to stock recovery.
fmkingpin said:
Reverted to stock recovery.
Click to expand...
Click to collapse
ok, i will try, i hope not found problem
thanks
zeko_1992 said:
ok, i will try, i hope not found problem
thanks
Click to expand...
Click to collapse
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
did you tried root again after update ?? success or fail ??
zeko_1992 said:
did you tried root again after update ?? success or fail ??
Click to expand...
Click to collapse
Fail.
fmkingpin said:
Fail.
Click to expand...
Click to collapse
hmmm... my device updated itself without my permission :crying:
i lost my root and twrp, i'm stuck with useless stupid update
tried searching in internet about root for new update and twrp but nothing for now
i think we will wait weeks or months to see new updates for root and twrp
if i found anything new, i will post here and mention you :good:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
zeko_1992 said:
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
Click to expand...
Click to collapse
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
swapyworld said:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
Click to expand...
Click to collapse
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for help guys, the problem now how to downgrade ???
zeko_1992 said:
thanks for help guys, the problem now how to downgrade ???
Click to expand...
Click to collapse
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
swapyworld said:
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
Click to expand...
Click to collapse
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
zeko_1992 said:
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
Click to expand...
Click to collapse
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
swapyworld said:
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
Click to expand...
Click to collapse
i tried using fastboot (mi flash tool) but error, tried another step in same app but show error
the new update changed everything, no one can downgrade from 11 to 10, i don't know why ??
from 10 to 8 you can downgrade without any problem, 11 you can't do anything
solved
finally i made it and back again to miui 10
best program for use xiaomitool
flash anything with 2-3 steps
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for highlighting issues with Magisk 20.1!
I used 20.0 and everything works
Any one using using gcam on miui 11?
I have a pocophone f1 which I attempted to root.
I already unlocked it using my MI account with MI unlocker on windows.
I installed TWRP 3.2, as well as SupersU.zip in TWRP.
I go and check root access using various root checker apps from playstore but i have no root access. One of them says that my supersu $Path does not contain a binary.
I tried uninstalling superSu using the supersSu uninstaller.zip in TWRP and then attempted flashing magisk, but i got the error about patched boot image. I wiped everything and then flashed stock global ROM for miui 11. Still i get the patched boot image when trying to flash magisk.
Any ideas?
Follow this
Silvershot said:
I have a pocophone f1 which I attempted to root.
I already unlocked it using my MI account with MI unlocker on windows.
I installed TWRP 3.2, as well as SupersU.zip in TWRP.
I go and check root access using various root checker apps from playstore but i have no root access. One of them says that my supersu $Path does not contain a binary.
I tried uninstalling superSu using the supersSu uninstaller.zip in TWRP and then attempted flashing magisk, but i got the error about patched boot image. I wiped everything and then flashed stock global ROM for miui 11. Still i get the patched boot image when trying to flash magisk.
Any ideas?
Click to expand...
Click to collapse
Just uninstall SuperSU root and root again with magisk! There is unroot option in the SuperSU app which you have to use or:
https://forum.xda-developers.com/showpost.php?p=63615067
@Silvershot
My POV: Noone needs to install TWRP to root phone's Android.
jwoegerbauer said:
@Silvershot
My POV: Noone needs to install TWRP to root phone's Android.
Click to expand...
Click to collapse
i just followed a tutorial on xda. what simple method do you know to root a poco f1? i need root urgent
abhi_tech said:
Just uninstall SuperSU root and root again with magisk! There is unroot option in the SuperSU app which you have to use or:
https://forum.xda-developers.com/showpost.php?p=63615067
Click to expand...
Click to collapse
thanks for your reply. I already mentioned i used the supersu uninstaller.zip from the link you provided. but magisk still says the boot image is patched...
Silvershot said:
i just followed a tutorial on xda. what simple method do you know to root a poco f1? i need root urgent
Click to expand...
Click to collapse
It's clear that something has gone very wrong. Instead of wasting time with troubleshooting, I recommend that you restore the phone to its original state via re-flashing its Stock ROM and when that's done retry to root its Android the proper way.
FYI: Once TWRP got installed on phone, you can't get rid off of it unless you re-flash phone's Stock ROM.
jwoegerbauer said:
It's clear that something has gone very wrong. Instead of wasting time with troubleshooting, I recommend that you restore the phone to its original state via re-flashing its Stock ROM and when that's done retry to root its Android the proper way.
FYI: Once TWRP got installed on phone, you can't get rid off of it unless you re-flash phone's Stock ROM.
Click to expand...
Click to collapse
i flashed stock rom. i already said it.... still the problem exists
Silvershot said:
i flashed stock rom. i already said it.... still the problem exists
Click to expand...
Click to collapse
If you flash phone's Stock ROM then neither Magisk nor TWRP is existing , you can't run either of them ...
jwoegerbauer said:
If you flash phone's Stock ROM then neither Magisk nor TWRP is existing , you can't run either of them ...
Click to expand...
Click to collapse
yea, i flashed stock rom, then installed TWRP.
i will now flash stock rom again. i wiped everything using TWRP first.
could you tell me what to do once i flash stock rom again?
i attached a screenshot of trying to flash Force Encryption Disabler V4 for Magisk 18. even the disabler doesnt work... please someone help! i am working with stock clean rom. what is going on
0
Silvershot said:
could you tell me what to do once i flash stock rom again?
Click to expand...
Click to collapse
I could but I don't want to: IMO you simply didn't get it - you do anything without questioning the meaning.
Happy fiddling around with Magisk etc.pp.
jwoegerbauer said:
I could but I don't want to: IMO you simply didn't get it - you do anything without questioning the meaning.
Happy fiddling around with Magisk etc.pp.
Click to expand...
Click to collapse
why are you on this forum if you dont want to help? i explicitly said i tried both supersu and magisk. or how can i root without these 2? why do you say i didnt get it? im pretty sure i did the steps correctly
Silvershot said:
why are you on this forum if you dont want to help?
Click to expand...
Click to collapse
ROFL
BTW: Being active in this forum does not force me to give help in every case. Accept it.
Seppppx said:
You don't have to disable encryption to use magisk. Atleast I think from my experience.
This is the step-by-step tutorial.
1. Flash this global stock miui with TWRP. https://c.mi.com/in/miuidownload/detail?device=1700355 (if this is not the official ROM please correct me, there are a lot of fakes there)
2. Flash Magisk with TWRP. Download and flash it from this github repo. DO NOT DOWNLOAD IT FROM ANYWHERE ELSE!
https://github.com/topjohnwu/Magisk/releases
3. Reboot
Click to expand...
Click to collapse
thank you. this worked. i was using older version of magisk. the latest one did the trick.