Mate 10 pro green screen - Huawei Mate 10 Questions & Answers

So today I was on checking something on my phone when it suddenly shuts down. I thought it was overheating again but when i checked, the phone temp wasn't even warm at all. I tried turning it back on, it got a green screen with 2 smaller boxes (red and blue) no text. Then it turned off and now my phone wouldn't turn on at all. I tried charging it but the led light did not even turn on. The phone wasn't even low on battery to begin with. The battery was at 60+% when it turned off.
Days ago i updated the phone then it started overheating. It also started having issues with the headphone and the charger (posted about this in another thread.) Now it's just dead.
Has anyone else experienced this? I don't know what I did wrong or what to do next. As much as possible i don't want to replace the phone, at least not yet. I will be traveling overseas tomorrow and i really need it.

did you ever find out the solution to this problem? My Huawei Mate SE started doing this to me today and idk what to do!!!

Related

[Q] One flashing red light

Why does this do this?
I left it on charge over night last night, to my surprise - it hadn't charged...
I have read all over about this, but this is different...
I connected it again, and one blinking red light came up, not the triple you usually get if it's dead...
this is the only response, and is continuous.
it finally turned on, I checked the status after turning everything off and setting it to airplane mode. it was at 1%...
2 hours later it was still at 1%, and then after 10 minutes i checked and noticed it said 0%.. then died.
It's now still plugged in and is flashing one red light again.
Any ideas how to fix this?
Hi.
Have you taken the battery out?, if not do so for 10 seconds or more and pop it back in see what that does.
Happened to me once, no matter what I did it didn't charge do i took the phone to the service center, they messed with something on the upper side of the phone.. plugged it into the wall and booooooom ... started charging again..
When I asked him what he did, he told me " it just needs a little magic ! "
Sent from my X10i using XDA App
Haha cool
Yeah I'm gunna ring them up tomorrow, I tried that little trick but it didn't work.
It now shows no sign of life.
I'll let you know how it gets on.
hi
i had same problem last night but without putting phone to charge
when i put it in 2 diffrent charger i have red light same as usb cable
when i push power button same pb red light
hello
i find solution
we ahve to charge batterie with external charger about 2/3 hours and after put Xperia charger
solution tested 100% work fine
problem was battery was full empty
JoelMan1121 said:
Why does this do this?
I left it on charge over night last night, to my surprise - it hadn't charged...
I have read all over about this, but this is different...
I connected it again, and one blinking red light came up, not the triple you usually get if it's dead...
this is the only response, and is continuous.
it finally turned on, I checked the status after turning everything off and setting it to airplane mode. it was at 1%...
2 hours later it was still at 1%, and then after 10 minutes i checked and noticed it said 0%.. then died.
It's now still plugged in and is flashing one red light again.
Any ideas how to fix this?
Click to expand...
Click to collapse
Have you tried a different battery?
I don't know if we can fix this problem but as other posts above have said that mobile shops could be able to fix it.
You could be able to send it to SE but if your phone has been rooted or debranded you void the warranty.
i had the same problem last night, the battery died and then when i plugged it in it came on to charge, and then off again. after that point just blinking red light.
i removed the battery for some time, plugged it back in, and left it on charge for a bit and it came on.
i think the problem is, that when it starts charging, it wants to turn the screen on, which takes more power than the charger can give. so it goes into a loop. and dies.
but leaving it on charge helps (it worked for me)

Bricked or Cold?

I have my GS3-I-9300 for roughly 3 months now. I rooted the phone roughly a month ago. Everything works fine and even yesterday it was still working fine. I left my music on, charging, and this morning when I woke up, the led is blinking, screen don't turn on. So I figure i'll just unplug the battery and see if it'll reset it, and after so many try, the phone won't turn on. My house got really cold last night and my phone was charging next to a window, I don't know if temperature has anything to do with it. Though would anyone be able to help me with this problem?
Read the sudden death thread .
jje

[Q] Can't start or charge my S3 i9300

Hey, i am new to xda, so i don't really know if this is the right category for this thread.
I am running Slimbean: Slim-i9300-4.3.build.2-OFFICIAL-1322 (the newest stable version)
And i have dropped my phone several times, so my screen is broken and gone over the back button (it still works).
Anyways, i dropped today AGAIN out of my pocket, in a car, when i was about to shut the door, so the phone was smashed by the door. The screen didn't crack more then it already is, but it shut down, and now i cannot start it. I figured it was becouse it ran out of battery (i only had like 2-1% when this happened), so i plugged in my charger, and nothing happens.
Usually when i plug it in when the phone is dead, i get this grey battery icon on the screen wich freezes, but it works.
Now nothing happens, and when i try to start it, nothing happens except the little red motion sensor thing is blinking red once in like 5 secs.
Do i need to buy a new battery? Please help!
P.S. I know i'm not very good at english, but please help!
carlen33 said:
Hey, i am new to xda, so i don't really know if this is the right category for this thread.
I am running Slimbean: Slim-i9300-4.3.build.2-OFFICIAL-1322 (the newest stable version)
And i have dropped my phone several times, so my screen is broken and gone over the back button (it still works).
Anyways, i dropped today AGAIN out of my pocket, in a car, when i was about to shut the door, so the phone was smashed by the door. The screen didn't crack more then it already is, but it shut down, and now i cannot start it. I figured it was becouse it ran out of battery (i only had like 2-1% when this happened), so i plugged in my charger, and nothing happens.
Usually when i plug it in when the phone is dead, i get this grey battery icon on the screen wich freezes, but it works.
Now nothing happens, and when i try to start it, nothing happens except the little red motion sensor thing is blinking red once in like 5 secs.
Do i need to buy a new battery? Please help!
EDIT: When i plugged my charger in and let it charge for like 15 mins, the LED starts showing yellow (wich means it's 15%+ but not done charging).
And nothing happens when i tried to wake it up. But when i held the power button for like 3-4 secs, the yellow light disappears. It does not vibrate or anything that it use too.
Click to expand...
Click to collapse

Help- Nabi 2 Won't Boot

My brother has a Nabi 2, and it was running fine for a while, but now everything's gone weird. It woun't boot up, and the screen only stays black, with nothing else on it. So first, we found that the Nabi was indicating that we needed a new charger, so he bought one. But it's been charging for a really long time, and there is still a black screen when you try to turn it on. I had rooted it, and I haven't messed with anything since. It has been stable for a couple months before this happened. If you go to turn it on while it's plugged in, the charging LED will change to green for a second, then switch back to red. The weird part is, this only happens if you hold down the power for 10 seconds or so, as if you are turning it off. I realize this isn't a common tablet, but I'm hoping there's something that anyone knows that will help my little brother.

Huawei P20 lite constantly vibrating after screen replace

Hi there,
Over the years i've done several smart phone repairs, screen replacements, batteries, new cases etc. All of them without any problems. A Few days ago a friend asked me to replace the case and screen of a Huawei P20 lite. Everything went fairly smooth, however after i finished replacing the parts and put the phone back together it does not turn on completely, only the charge light turns red and the phone is vibrating non stop while on charger.
Note: The phone has not been used +- 4 months before repair. When i remove the charger the phone dies again. Sometimes when powering up, the boot animation starts (max 2 sec) but then the screen goes black again (vibrating continues and charging led stays on). The battery was a real pain to get out, so it took some light bending to get it out. Not sure the battery is causing the issue though.
What i've tried:
- Charge the phone with different chargers/cables for 1 hour +
- Charge from low power charger for 4 hours.
- Leave the phone 2 days and try again
- Took it apart again and put it back together, exact same issue.
- Try to start the phone without battery/screen/camera's and other devices that are not mandatory, same issue persists.
- try to get in recovery etc.. no success.
Could anyone help me how to find the culprit of this issue, im really lost.. Any tips are much appreciated.
Thanks in advance!
check batery by multimeter first and if posible use other for test.
take tooth brush and clean all connectors in phone also.
Did u test screen before asembly it ? it was works ?
Hello I have the same problem and I fixed
Dear,
This is solved by changing the sense of the motherboard cable, incredible but True

Categories

Resources