If you guys wanna try a custom kernel finally on the p10 go down to this thread :
https://forum.xda-developers.com/p10-plus/development/kernel-hyperplus-kernel-oreo-t3753128
Install his custom kernel on my phone android 8.0 vtr-l09c432b360 and kernel is working fine.
all thanks to the original thread!
Has anybody tried this? how does it work?
martindoublem said:
Has anybody tried this? how does it work?
Click to expand...
Click to collapse
Honestly for me it's been working very good, finally the restrictions of the original kernel where you weren't able to change the clock speeds are gone. On idle is working very good very smooth no hiccups been using it and analyzing it for almost a week and I don't see anything bad or bugs so far, lost like 2% of Battery on idle for six hours which is pretty good. I would recommend it over the stock kernel. You can go to there threads on the link in the op and read more about the performance of it.
Sent from my [device_name] using XDA-Developers Legacy app
Hi...just flashed the kernel along with MTtweek app... installed lightning fast via adb
im on VTR-L29C432B360
app is nicely done,prefer dark mode
for now its base install...havent tried any mods in the tweeking app like OC ect....need to read more about that
virusdunil said:
Hi...just flashed the kernel along with MTtweek app... installed lightning fast via adb
im on VTR-L29C432B360
app is nicely done,prefer dark mode
for now its base install...havent tried any mods in the tweeking app like OC ect....need to read more about that
Click to expand...
Click to collapse
read sonicrons interactive governor's advance tweak
https://forum.xda-developers.com/showthread.php?t=3290605
Also this link will help you with some info about some things that drain you battery
https://forum.xda-developers.com/showthread.php?t=3741146
Sent from my [device_name] using XDA-Developers Legacy app
Thanks mate
Do you still pass safetynet after this is installed (with Magisk also installed)?
colthekid said:
Do you still pass safetynet after this is installed (with Magisk also installed)?
Click to expand...
Click to collapse
yes mate...all green for me
I flashed V2 Jam Master B360 on my VTR-L29C185B360 oreo and got boot loop.
This does not work.
how did you flash ?... twrp or fastboot ?
This does NOT work for VTR-L29C185 B360
Bootloop
Thanks for notifying us. Just flashed it successfully on my P10.
dmmercado23 said:
Thanks for notifying us. Just flashed it successfully on my P10.
Click to expand...
Click to collapse
what model is your P10 and what version software?
---------- Post added at 11:27 AM ---------- Previous post was at 11:27 AM ----------
virusdunil said:
how did you flash ?... twrp or fastboot ?
Click to expand...
Click to collapse
I flashed via FASTBOOT
Works fine for me on VTR-L29C636B360
mxn2000 said:
Works fine for me on VTR-L29C636B360
Click to expand...
Click to collapse
How did you flash what procedure and which file???
Hi, this Work on Huawei P10 VTR-L09 8.0.0.360(C432) ?
Not working on my VTR-L29C432B365. Not booting after flashing, freeze at bootloader screen.
BACKUP YOUR KERNEL WITH TWRP BEFORE YOU FLASH THIS!
The backup worked like a charm.
My p10 is VTR-L29 8.0.0.0360 (C636), i flashed through FASTBOOT with the B360 VERSION.
can you share the link to the file you flashed & what fastboot command you used
fatjoez said:
can you share the link to the file you flashed & what fastboot command you used
Click to expand...
Click to collapse
Download the 360 version and flash using this command fastboot flash kernel thenameofthekernel.img Hope it helps. If u wanna use magisk make sure to flash magisk first and then the kernel.
Related
Just got new update four chrome youtube videos issue .its a small update but imp 1!
Here it is
trendchanger said:
Here it is
Click to expand...
Click to collapse
Already running since yesterday
Sent from my ONE E1003 using Tapatalk
v4a
Have any of you managed to get viper4android running after this hotfix patch? It ran beautifully up to 2.1.2 but the 2.1.3 (005) update broke it for me so I reverted. Rooted with TWRP and SU, PlayerPro and Spotify.
frmad said:
Have any of you managed to get viper4android running after this hotfix patch? It ran beautifully up to 2.1.2 but the 2.1.3 (005) update broke it for me so I reverted. Rooted with TWRP and SU, PlayerPro and Spotify.
Click to expand...
Click to collapse
I did not know that v4a was even working with 2.1.2 haha. Thank you for that. If you ever get it to work or have any updates on v4a pls do let us know
Savya said:
I did not know that v4a was even working with 2.1.2 haha. Thank you for that. If you ever get it to work or have any updates on v4a pls do let us know
Click to expand...
Click to collapse
I managed to get it working by flashing Lolliviper from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
At the end of the OP there's a link to LolliviperROUND which uses the external speaker for stereo audio however I haven't tried that out yet. For the standard V4A, just flash Lolliviper.zip from recovery or through Flashify and reboot. The V4A app will be in the app drawer and you just proceed as usual
Hit the thanks button if I helped! :fingers-crossed:
bijgu said:
I managed to get it working by flashing Lolliviper from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
At the end of the OP there's a link to LolliviperROUND which uses the external speaker for stereo audio however I haven't tried that out yet. For the standard V4A, just flash Lolliviper.zip from recovery or through Flashify and reboot. The V4A app will be in the app drawer and you just proceed as usual
Hit the thanks button if I helped! :fingers-crossed:
Click to expand...
Click to collapse
Are you sure this works on the 2.1.3 Ota?
Is there any "out of the box" way to downgrade it to 2.1.2? swiftkey keyboard seems laggy/sluttery in some way for me with the latest version 2.1.3. Have any of you noticed the same?
qcn85 said:
Is there any "out of the box" way to downgrade it to 2.1.2? swiftkey keyboard seems laggy/sluttery in some way for me with the latest version 2.1.3. Have any of you noticed the same?
Click to expand...
Click to collapse
Install the 2.1.3-X
Savya said:
Are you sure this works on the 2.1.3 Ota?
Click to expand...
Click to collapse
I've had it running since 2.1.2 and i'm on 2.1.3-X right now, no problems at all
Kéno40 said:
Install the 2.1.3-X
Click to expand...
Click to collapse
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Funk Wizard said:
Already running since yesterday
View attachment 3564556
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
wch os u r using
n how did u changed the font
qcn85 said:
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Click to expand...
Click to collapse
No its a system update check your cell for system update
qcn85 said:
Thanks. To do so I guess I would need to root the phone, install custom recovery, etc.... right?
Click to expand...
Click to collapse
Yes, you need to be rooted to flash v4a I suggest the kingroot then replace with supersu method.. barely took 5 minutes
Honestly speaking.. do not see a difference.. :v
Would love cyanogen for this one.. also will it give a feature to disable the quick settings?
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
rokilmr said:
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
Click to expand...
Click to collapse
The same was happening with me. I installed blueaparks twrp and it worked like charm. Install that twrp. Install 2.1.3 full rom. Then flash 2.1.3-x on it. Should work.
Sent from my ONE E1003 using Tapatalk
vinay7 said:
wch os u r using
n how did u changed the font
Click to expand...
Click to collapse
Running O2OS 2.1.3-X
Once rooted you can change or customize almost anything on the device
---------- Post added at 04:02 AM ---------- Previous post was at 04:00 AM ----------
bijgu said:
Yes, you need to be rooted to flash v4a I suggest the kingroot then replace with supersu method.. barely took 5 minutes
Click to expand...
Click to collapse
First V4A not O2OS compatible, and Second KOR never recommended, moreover u need custom recovery for V4A Flash
The normal method would also take just 5 minutes once files are downloaded and drivers installed.
---------- Post added at 04:04 AM ---------- Previous post was at 04:02 AM ----------
khandelwalgaurav said:
Honestly speaking.. do not see a difference.. :v
Would love cyanogen for this one.. also will it give a feature to disable the quick settings?
Click to expand...
Click to collapse
No lags on 2.1.3-X and is the best update till now. There are modules for disabling quick settings if you are rooted
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
rokilmr said:
When ever i want to flash the update its says failed to flash?am currently running 2.1.2 stock...what to do?and also how do i check if the update is available as ota?cause i did not get any notification.Thanks
Click to expand...
Click to collapse
khandelwalgaurav said:
The same was happening with me. I installed blueaparks twrp and it worked like charm. Install that twrp. Install 2.1.3 full rom. Then flash 2.1.3-x on it. Should work.
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Answered here
http://forum.xda-developers.com/devdb/project/dl/?id=15482&task=get
GUYS i have noticed BATTERY DRAIN AFTER 2.1.3.X UPDATE .....BATTERY DRAIN IS VERY MUCH NOTICEABLE!!!
trendchanger said:
GUYS i have noticed BATTERY DRAIN AFTER 2.1.3.X UPDATE .....BATTERY DRAIN IS VERY MUCH NOTICEABLE!!!
Click to expand...
Click to collapse
Let the ota settle down for a couple of battery cycles
Sent from my ONE E1003 using Tapatalk
I 've honor 5x indian version L22 variant. I have rooted it and have twrp super su and busy box already installed on phone
I need xposed for my phone but can't find anything yet
Can anyone look into that. Thank you on advance......I'm really looking for someone's help with the same.
prateek57 said:
I 've honor 5x indian version L22 variant. I have rooted it and have twrp super su and busy box already installed on phone
I need xposed for my phone but can't find anything yet
Can anyone look into that. Thank you on advance......I'm really looking for someone's help with the same.
Click to expand...
Click to collapse
You can't flash Xposed in EMUI. Well there is a modified stock ROM for our phone that you can flash Xposed with, I recommend that you flash a custom ROM first. Go try CM first for size.
Sent from my honor 5X using XDA Labs
I've installed Xposed on my L22 B360, there seems to be no problem. Go here and download xposed zip file for sdk23/arm64 version and flash it in TWRP. Then install the xposed installer apk to activate the modules. The first boot may take some time.
xskull03 said:
I've installed Xposed on my L22 B360, there seems to be no problem. Go here and download xposed zip file for sdk23/arm64 version and flash it in TWRP. Then install the xposed installer apk to activate the modules. The first boot may take some time.
Click to expand...
Click to collapse
Whoa. Great. I previously said it won't work because the original TWRP developer for our phone said so.
Sent from my Galaxy Tab 3 using XDA Labs
xskull03 said:
I've installed Xposed on my L22 B360, there seems to be no problem. Go here and download xposed zip file for sdk23/arm64 version and flash it in TWRP. Then install the xposed installer apk to activate the modules. The first boot may take some time.
Click to expand...
Click to collapse
which version have you installed on your phone? i tried installing xposed-v86-sdk23-arm64.zip but phone stuck at boot logo.
adriansticoid said:
Whoa. Great. I previously said it won't work because the original TWRP developer for our phone said so.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
so your saying that its not possible or your supporting that now it can be done?
adriansticoid said:
You can't flash Xposed in EMUI. Well there is a modified stock ROM for our phone that you can flash Xposed with, I recommend that you flash a custom ROM first. Go try CM first for size.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
which one do you suggest. I prefer max ram and everything working. It reached to my ears that CM still is not fully supported, isn't it correct?
prateek57 said:
so your saying that its not possible or your supporting that now it can be done?
Click to expand...
Click to collapse
Since the other guy said that it is working, then yes it should work for you also.
prateek57 said:
which one do you suggest. I prefer max ram and everything working. It reached to my ears that CM still is not fully supported, isn't it correct?
Click to expand...
Click to collapse
Actually I'm using CM+Xposed now for over a year. Never had problems with it.
Sent from my honor 5X using XDA Labs
prateek57 said:
which version have you installed on your phone? i tried installing xposed-v86-sdk23-arm64.zip but phone stuck at boot logo.
Click to expand...
Click to collapse
Same version. First boot will take some time. (Around 6 mins for me)
xskull03 said:
Same version. First boot will take some time. (Around 6 mins for me)
Click to expand...
Click to collapse
It will depend on the number of apps installed.
Sent from my Galaxy Tab 3 using XDA Labs
xskull03 said:
Same version. First boot will take some time. (Around 6 mins for me)
Click to expand...
Click to collapse
adriansticoid said:
It will depend on the number of apps installed.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
that you both of you for your prompt reply. i tried xposed-v86-sdk23-arm64 but it still stuck at boot logo while xposed-v85-sdk23-arm64 finally worked like a charm its may be because I'm at stock rom only.
also please enlighten me using about using CM a bit more. I'm pretty comfortable using custom roms but havn't tried CM yet. Which CM version should I try if this is my first hand on CM. Also would you please tell me about what benefits I can expect against my stock b360 ? and basically what are the pros and cons? . I'm sorry if its a very noob question.
prateek57 said:
that you both of you for your prompt reply. i tried xposed-v86-sdk23-arm64 but it still stuck at boot logo while xposed-v85-sdk23-arm64 finally worked like a charm its may be because I'm at stock rom only.
also please enlighten me using about using CM a bit more. I'm pretty comfortable using custom roms but havn't tried CM yet. Which CM version should I try if this is my first hand on CM. Also would you please tell me about what benefits I can expect against my stock b360 ? and basically what are the pros and cons? . I'm sorry if its a very noob question.
Click to expand...
Click to collapse
CM is closer to stock android than EMUI with little customizations, so if u want stock android experience go for it.
There are CM12.1 and 13 for us. CM13 is official with nightlies and it has Fingerprint support too. Go for it.
I would say that CM13 is much smoother than EMUI B360. While battery backup may vary, the trend I found was B130>CM13>B360. All 3 of them had xposed+amplify+greenify installed. B360 has VoLTE support, so if u are using Jio then u get True Voice calls(tho there's not much difference). IMO there is little reason to stay on B360 other than VoLTE.
prateek57 said:
that you both of you for your prompt reply. i tried xposed-v86-sdk23-arm64 but it still stuck at boot logo while xposed-v85-sdk23-arm64 finally worked like a charm its may be because I'm at stock rom only.
also please enlighten me using about using CM a bit more. I'm pretty comfortable using custom roms but havn't tried CM yet. Which CM version should I try if this is my first hand on CM. Also would you please tell me about what benefits I can expect against my stock b360 ? and basically what are the pros and cons? . I'm sorry if its a very noob question.
Click to expand...
Click to collapse
If you are in B360 right now, you can't flash custom ROMs. You need to downgrade to B350 or lower because it will bootloop.
You should try the latest nightly of CM.
The pros and cons will depend on your personal preferences.
CM is vanilla Android with some modifications for performance, while stock ROM is EMUI which has the looks of iOS.
Sent from my honor 5X using XDA Labs
xskull03 said:
CM is closer to stock android than EMUI with little customizations, so if u want stock android experience go for it.
There are CM12.1 and 13 for us. CM13 is official with nightlies and it has Fingerprint support too. Go for it.
I would say that CM13 is much smoother than EMUI B360. While battery backup may vary, the trend I found was B130>CM13>B360. All 3 of them had xposed+amplify+greenify installed. B360 has VoLTE support, so if u are using Jio then u get True Voice calls(tho there's not much difference). IMO there is little reason to stay on B360 other than VoLTE.
Click to expand...
Click to collapse
well I'm using jio as well as airtel 4g as jio 4g is not that a great experience except its free.
also are you trying to say that cm13 has better battery backup than b360? isn't b130 is for kiw-L21 or L24? how can I use that on my L22?
well what I basically need is smoothest experience without lags and everything working and that includes VoLTE and .
adriansticoid said:
If you are in B360 right now, you can't flash custom ROMs. You need to downgrade to B350 or lower because it will bootloop.
You should try the latest nightly of CM.
The pros and cons will depend on your personal preferences.
CM is vanilla Android with some modifications for performance, while stock ROM is EMUI which has the looks of iOS.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
Correct me if I'm wrong but if I downgrade to b350 i would loose VoLTE right? Well as said above I really like is smoothest experience without lags and everything working.
Also as you both suggested nightly CM13 that must worth a try. thank you for your valuable time and efforts for the prompt replies
prateek57 said:
Correct me if I'm wrong but if I downgrade to b350 i would loose VoLTE right? Well as said above I really like is smoothest experience without lags and everything working.
Also as you both suggested nightly CM13 that must worth a try. thank you for your valuable time and efforts for the prompt replies
Click to expand...
Click to collapse
All ROMs that we have are for all variants of this phone. Yes you'll lose VoLTE with B350 downgrade. Performance of custom ROMs vary from user to user because we have different app setup choices so it's important to try most of them. No problem buddy we are always here to help.
Sent from my honor 5X using XDA Labs
Xposed work on kiw-l22? Bcoz i have greenify purchased ver... want to apply to this device
Yup
seii3 said:
Xposed work on kiw-l22? Bcoz i have greenify purchased ver... want to apply to this device
Click to expand...
Click to collapse
Yes.....latest xposed version works like a charm
prateek57 said:
Yes.....latest xposed version works like a charm
Click to expand...
Click to collapse
Using this xposed version is it???
http://forum.xda-developers.com/showthread.php?t=3034811
Ya right
And install the framework from the app itself
Pre requisites
Rooted
Twrp installed
prateek57 said:
Ya right
And install the framework from the app itself
Pre requisites
Rooted
Twrp installed
Click to expand...
Click to collapse
using arm-64? i keep stuck at logo by flashing xposed-v86-sdk23-arm64.zip
Disclaimer: I'm not responsible for any device. Flash on your own risk! Warranty is void if flashed.
I wanted to make my own rom. It's based on stock last nougat frim for S6 920F i hope you like it
-Based on XXU5EQAC NOUGAT firmware with the FEBRUARY security patch.
-Debloated i remove a lot of apks form frim
-Odexed, Zipaligned, Busybox, Deknoxed and SQlite.
-Added Tweaks for battery , performance and it's very smooth
-Performance mod.
-S8 font for lock screen and weather.
Download here :
Mega link :https://mega.nz/#F!oZoS0BwZ!xPX2XaeQSbDvaFx0rowg4w
How to install:
1) Enter TWRP recovery.
2) Wipe Dalvik Cache, Cache and System.
3) Choose the rom zip
4) Flash Magisk that i put in the download folder you need to boot the rom and than download magisk manager form play store to have root
5) Reboot.
6) Wait 10 or 15 min for first boot.
Thanks to:
@AlexisXDA for helping me
@cloud596 thanks mate for your help
Screenshots:
Screen shots ?
the usb debug mode is work?
Chriss1983 said:
the usb debug mode is work?
Click to expand...
Click to collapse
Yes mate.
Bilal_687 said:
Screen shots ?
Click to expand...
Click to collapse
I will put now
How can I install your ROM on G920I? I really appreciate it
Excuse me for asking I'm still new here but What's different compared to stock ?
Base on stock nougat?
Awesome, my tutorial worked ahahaha, good luck with your works mate
Thank you for your effort I'm very interested in trying this one. Tell me one thing, coming from Marshmallow, do I need to flash Nougat bootloader and modem or is it OK just to follow the given procedure? Thanks!
Human_Fly said:
Thank you for your effort I'm very interested in trying this one. Tell me one thing, coming from Marshmallow, do I need to flash Nougat bootloader and modem or is it OK just to follow the given procedure? Thanks!
Click to expand...
Click to collapse
Just flash mate it will work
Sent from my SM-G920F using XDA-Developers Legacy app
tachiquan3 said:
Base on stock nougat?
Click to expand...
Click to collapse
Yes
Sent from my SM-G920F using XDA-Developers Legacy app
Bilal_687 said:
Excuse me for asking I'm still new here but What's different compared to stock ?
Click to expand...
Click to collapse
Debloated with nice tweaks
Sent from my SM-G920F using XDA-Developers Legacy app
Mercz23 said:
Just flash mate it will work
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thanks, cheers!
bielsimao said:
How can I install your ROM on G920I? I really appreciate it
Click to expand...
Click to collapse
You can flash it mate 920F and 920I are the same
Sent from my SM-G920F using XDA-Developers Legacy app
Can you add flotify sms?
nikkali25 said:
Can you add flotify sms?
Click to expand...
Click to collapse
Install it yourself.
LUUD18 said:
Install it yourself.
Click to expand...
Click to collapse
How?
sim tool missed
Mercz23 said:
Yes
Click to expand...
Click to collapse
Dual sim support? Coz i installed and didnt boot, stuck on recovery.
Hi,
Well, everything is pretty much in the title...
I have tried to install several GSI Treble images, but that was almost always a "No-Go" because it either did not even install, or it installed but did not boot or it booted but too many severe problems...
So, until someone releases a proper dedicated ROM for the POCO, I would like to stick to stock, but would like to be able to make a liitle more than what MIUI allows.
So I am wondering : has someone successfully installed XPosed framework on the Pocophone ?
Regards.
NexusPenguin said:
Hi,
Well, everything is pretty much in the title...
I have tried to install several GSI Treble images, but that was almost always a "No-Go" because it either did not even install, or it installed but did not boot or it booted but too many severe problems...
So, until someone releases a proper dedicated ROM for the POCO, I would like to stick to stock, but would like to be able to make a liitle more than what MIUI allows.
So I am wondering : has someone successfully installed XPosed framework on the Pocophone ?
Regards.
Click to expand...
Click to collapse
Not yet. I've tried few times, couple of builds and got the same result: stuck on boot.
SnakeByte said:
Not yet. I've tried few times, couple of builds and got the same result: stuck on boot.
Click to expand...
Click to collapse
Hi, same here stuck on boot.. What should I do to be able to boot again?
DoudouJack said:
Hi, same here stuck on boot.. What should I do to be able to boot again?
Click to expand...
Click to collapse
Reflash the rom again.
thomas140 said:
Reflash the rom again.
Click to expand...
Click to collapse
Yes you can but i actually didn't. I have twrp and i was able to reinstall the downloaded xposed in recovery and just got it to boot. Remember to clean cache / dalvik after you flash.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
Yes you can but i actually didn't. I have twrp and i was able to reinstall the downloaded xposed in recovery and just got it to boot. Remember to clean cache / dalvik after you flash.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
Ok, that's a good news. But does xposed work after boot up? I have heard lots of people trying but failed.
Anyway, what's your Miui version? or custom roms?
DoudouJack said:
Hi, same here stuck on boot.. What should I do to be able to boot again?
Click to expand...
Click to collapse
You already have the xposed downloaded. Boot into twrp and install xposed. Somehow doing this, it actually help me boot into system. No, the xposed will not be installed but there's no more bootloop. After installing xposed from twrp remember to clear cache/dalvik and reboot into system.That worked for me without wiping anything.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
---------- Post added at 03:31 AM ---------- Previous post was at 03:29 AM ----------
thomas140 said:
Ok, that's a good news. But does xposed work after boot up? I have heard lots of people trying but failed.
Anyway, what's your Miui version? or custom roms?
Click to expand...
Click to collapse
No, xposed will not be installed after this, i know that sounds silly but somehow installing from twrp cleared the problem i had trying to install from magisk.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
No, xposed will not be installed after this, i know that sounds silly but somehow installing from twrp cleared the problem i had trying to install from magisk.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
Click to expand...
Click to collapse
That's pretty sad. I am very new on xposed and I heard there are some nice stuffs. But I heard that most of miui device doesn't support xposed?
thomas140 said:
That's pretty sad. I am very new on xposed and I heard there are some nice stuffs. But I heard that most of miui device doesn't support xposed?
Click to expand...
Click to collapse
Not sure which ones does support or not but i really miss xposed.
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
I actually booted into twrp and used mm to remove the xposed Magisk package. There is a thread on XDA that explains better (can't link it right now)
DoudouJack said:
I actually booted into twrp and used mm to remove the xposed Magisk package. There is a thread on XDA that explains better (can't link it right now)
Click to expand...
Click to collapse
And can you boot into system now?
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
And can you boot into system now?
Click to expand...
Click to collapse
Yes everything back to normal
DoudouJack said:
Yes everything back to normal
Click to expand...
Click to collapse
Awesome :good:
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
---------- Post added at 02:26 AM ---------- Previous post was at 02:23 AM ----------
thomas140 said:
Ok, that's a good news. But does xposed work after boot up? I have heard lots of people trying but failed.
Anyway, what's your Miui version? or custom roms?
Click to expand...
Click to collapse
Forgot to mention,sorry, i'm on official beta Miui 10, rooted
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
SnakeByte said:
Awesome :good:
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
---------- Post added at 02:26 AM ---------- Previous post was at 02:23 AM ----------
Forgot to mention,sorry, i'm on official beta Miui 10, rooted
Click to expand...
Click to collapse
Ok I'm on miui 10 rooted too please give your Xposed zip that you flash on it please
Ok, because the file exceeds maximum size of 8 mb that can be uploaded as a zip, i cannot put it here, yet this is the module downloaded from Magisk manager, there's also another version you can find there (one is Xposed framework sdk 27 and the other is Xposed framework v89, so read the descriptions before installing), but remember, on my case, flashing / installing xposed did not worked, and i got stuck on boot. There's still options you can bring your phone back from bootloop, as the ones mentioned above, yet there's still a possibility to experience another issues, so please understand that i do not find myself responsible for whatever you choose to do with these files.
This xposed module can be installed in twrp or in Magisk manager.
Miui 10, rooted. after install xpose framework from magic stuck at boot loop? do i need to reflash rom or?
can flash uninstall?
maricc said:
Miui 10, rooted. after install xpose framework from magic stuck at boot loop? do i need to reflash rom or?
can flash uninstall?
Click to expand...
Click to collapse
Follow this guide for uninstalling Magisk module from recovery (METHOD 2 is EASY and STRAIGHTFORWARD): https://magiskroot.net/uninstall-magisk-module-twrp/
---------- Post added at 02:25 PM ---------- Previous post was at 02:08 PM ----------
BTW if somebody has an update for a Xposed framework working on POCO F1 I'm looking forward!
MIUI always breaks compatibility with Xposed.
I've started a GH issue for support please join there, give a thumbs up to the issue and provide logs if you can
SnakeByte said:
Not yet. I've tried few times, couple of builds and got the same result: stuck on boot.
Click to expand...
Click to collapse
By 'couple of builds' do you mean miui only or also aosp like lineageos and rremix?
Dna10 said:
By 'couple of builds' do you mean miui only or also aosp like lineageos and rremix?
Click to expand...
Click to collapse
Just Miui
Sent from my Xiaomi POCOPHONE F1 using XDA Labs
Beast ROM 9727+9711fw = .3-.6% per hour.
Any contenders, just out of interest! :fingers-crossed:
Added pic:
badaas said:
Beast ROM 9723+9711fw = .3-.6% per hour.
Any contenders, just out of interest! :fingers-crossed:
Click to expand...
Click to collapse
Can you please share links for downloading the FW and ROM tou used? Also, I saw in the beast rom thread you did other stuff to tweak the battery life. Care to write a short summary here including links? Thanks!
how can you track the consumption like in your picture? I would be curious which of my setups and versions issued works best for the Xiaomi.EU
catalindobre said:
how can you track the consumption like in your picture? I would be curious which of my setups and versions issued works best for the Xiaomi.EU
Click to expand...
Click to collapse
Ex kernel manager or BBS
catalindobre said:
how can you track the consumption like in your picture?
Click to expand...
Click to collapse
FK Kernel Manager
Anyone here try havoc OS and can share tge battery life?
onlyLyon said:
Can you please share links for downloading the FW and ROM tou used? Also, I saw in the beast rom thread you did other stuff to tweak the battery life. Care to write a short summary here including links? Thanks!
Click to expand...
Click to collapse
I wiped data/system/vendor
Reboot to recovery
Mount mtp and copy over zips
Flash firmware
Flash beast
Flash opengapps 9.0 64bit micro (30july version)
Wipe cache and dalvik
Reboot system
Set up
Reboot twrp install canary magisk
Reboot system
Turn off location background scanning
Use tasker to disable NFC when screen off
Uninstall YouTube (personal?)
Turn off Bluetooth
Reboot turn on Bluetooth (mi8 bug?)
badaas said:
I wiped data/system/vendor
Reboot to recovery
Mount mtp and copy over zips
Flash firmware
Flash beast
Flash opengapps 9.0 64bit micro (30july version)
Wipe cache and dalvik
Reboot system
Set up
Reboot twrp install canary magisk
Reboot system
Turn off location background scanning
Use tasker to disable NFC when screen off
Uninstall YouTube (personal?)
Turn off Bluetooth
Reboot turn on Bluetooth (mi8 bug?)
Click to expand...
Click to collapse
Have you tried BeastROMs-1.6-cepheus-OFFICIAL-20190806-0459.zip?
I am currently using xiaomu eu miui 9.8.1 and am thinking of formatting my phone completely and then flashing the beast rom I just mentioned + magisk 19.4 (canary) etc. but I am not sure if that's a good version of beast rom and if my current firmware is good or if I should flash an earlier version...
onlyLyon said:
Have you tried BeastROMs-1.6-cepheus-OFFICIAL-20190806-0459.zip?
I am currently using xiaomu eu miui 9.8.1 and am thinking of formatting my phone completely and then flashing the beast rom I just mentioned + magisk 19.4 (canary) etc. but I am not sure if that's a good version of beast rom and if my current firmware is good or if I should flash an earlier version...
Click to expand...
Click to collapse
Yes, got big drain 1-2% with newest beast, with newest fw and with 9711fw. 9711fw is the best I've tried, have heard 9722 is ok..
Also latest 1.6 has Bluetooth bug inherited from Google latest sec patch.
Do you have a link to the 9723 Version, because i only could find the 9727 Version
badaas said:
Yes, got big drain 1-2% with newest beast, with newest fw and with 9711fw. 9711fw is the best I've tried, have heard 9722 is ok..
Also latest 1.6 has Bluetooth bug inherited from Google latest sec patch.
Click to expand...
Click to collapse
Thanks!
Can you please give 2 links to the exact ROM and to the 9711fw you used?
TomOkyo said:
Do you have a link to the 9723 Version, because i only could find the 9727 Version
Click to expand...
Click to collapse
onlyLyon said:
Thanks!
Can you please give 2 links to the exact ROM and to the 9711fw you used?
Click to expand...
Click to collapse
Fw here: https://forum.xda-developers.com/Mi-9/how-to/firmware-vendor-collection-flashable-t3950943
There's a link to ROM in beast thread.
Sorry my bad it's 9727 beast!
Here: https://drive.google.com/file/d/17PIlCPVHeZwKXi84uaigujgy5vWlgk_S/view?usp=drivesdk
PE with beast kernel is pretty good.
gianton said:
PE with beast kernel is pretty good.
Click to expand...
Click to collapse
Did you extract kernel? Zip? Thanks!
badaas said:
Did you extract kernel? Zip? Thanks!
Click to expand...
Click to collapse
I extracted the boot.img just flash it with twrp as image.
https://drive.google.com/file/d/1-TcNaJcm2WB1wJzNppPEzPbBzqW91685/view?usp=drivesdk
Finally have a good combination for the best performance and battery.
BeastROM 0806 build, fw 9.8.1 with LKT and FDE together.
Very satisfied.
initguru said:
Finally have a good combination for the best performance and battery.
BeastROM 0806 build, fw 9.8.1 with LKT and FDE together.
Very satisfied.
Click to expand...
Click to collapse
Let's see if it lasts... :angel:
Xiaomi.eu 10.9.8.1
badaas said:
Xiaomi.eu 10.9.8.1
Click to expand...
Click to collapse
Which app is that?