I got a new Elephone S8 about a week ago, and it's having a glitch that's happened 3 different times. The touch screen becomes unresponsive for around 20 minutes, and after restarting it will work again but it always says the battery is at 1% when it had a full charge before the issue happened. Has anybody else encountered this? I'm terrified that one time the touch screen won't come back. It doesn't seem to be a hardware issue, but some type of glitch. Any suggestions would be greatly appreciated.
Elephone S8 touch screen stop working
I have the same problem, I even managed to put ERAGON ROM and again the same thing, the screen just stops working, I even think it has no rules when it will work, and when it does not.
Not here. It seems to me that some folks got units with flaky digitisers. If it were just firmware, I suspect everyone would have the issue.
To share experience with the problem, touch screen stops working!
I returned via Flash Tool to 01701018 release official and then> flash root> flash twrp. Then I installed "magisk manager 16" and for now the cellular phone works for 2 days, since it will not have a SIM card while testing the touch screen lock. I will let you know guys... :angel:
That's what I'm planning on doing today: returning my phone to original rom. Has it happened anymore since you downgraded?
claylord84 said:
I returned via Flash Tool to 01701018 release official and then> flash root> flash twrp. Then I installed "magisk manager 16" and for now the cellular phone works for 2 days, since it will not have a SIM card while testing the touch screen lock. I will let you know guys... :angel:
Click to expand...
Click to collapse
If that's the case, I would need to replace the entire screen, correct? A new one is $50, and I only paid $175 for the new phone! I just don't know if that's worth it
map002 said:
Not here. It seems to me that some folks got units with flaky digitisers. If it were just firmware, I suspect everyone would have the issue.
Click to expand...
Click to collapse
S8 touch screen
Celeste8157 said:
If that's the case, I would need to replace the entire screen, correct? A new one is $50, and I only paid $175 for the new phone! I just don't know if that's worth it
Click to expand...
Click to collapse
In my case, even the SIM card has no connection to the effect of locking the touch screen of a cell phone, it is always the same problem. The screen simply does not work when it does not work. "It seems to me that some people get units with dirty digitizers?" I have no idea...
Hardware defects should be covered under the phone's warranty... And if it's soon enough after purchase, by the shop where you bought the phone.
Best of luck to you!
Related
My touch screen will not work at all, everything else on the phone works just fine. I tried a hard reset and now I am stuck at the alignment screen. Any suggestions.. Anyone run across this error?
Thanks
reflash bro
put the stock rom back on
and then put the modded rom on
and it should be fine
Typically means something is interfering with the recognizer.
If you are using a protective case (shell) or screen protector, try removing them temporarily to see if they may be causing your problem.
I didn't have anything over the screen.. Any idea why it would do something like that?? I'm going to reflash to stock and back to modded ROM tonight and I'll let you guys know in the morning.. Thanks for your help.
Could be a "bad" flash.
If it still happens with the stock ROM flash, you may have a defective unit on your hands.
Hardware problem?
I had the exact same problem about a week ago. I tried reflashing the device, hard reset, etc. In the end, I couldn't even get past the screen calibration wizard. My conclusion was that I had some kind of harware problem -- the touch screen would respond intermittently for brief periods of time and then go unresponsive again.
My fix: I took the phone to my ATT service center who, much to my gleeful surprise, gave me a new one (warranty exchange) without any hassle. I expected to have to fight with them, but the transaction was trivial and stress-free.
I'm now deciding which WM 6.5 ROM I like the best. Many thanks to all the hard-working contributors and chefs on XDA for providing such awesome content and support!
Good Luck with your phone
i also had this problem recently. phone was working fine in the night, went to bed and woke up and was unresponsive. Tried everything. I ended up flashing back to all the stock stuff and sent it in for repairs. I got the screen and dpad replaced under warranty. I have no idea what caused it, but it happened. Definately not a software issue if you have reflashed...
my advise, flash back to stock spl and your carrier rom and send it back.
I had a similar problem and opened a thread as well. My problem in chronological order
1. Bought a TMobile MDA IV over ebay.
2. Flashed several different ROMs of WM6.1 and was just enjoying myself.
3. Installed a 6.5 ROM the calibration screen required me to go through 3 full circles.
4. Worked fine for a day, then the device was locked and watever I tried I just couldnt get to open it up
5. Did softreset, it didnt help either. I Would end up at lock screen
6. Finally got back to HTC stock ROM 6.1, and I couldnt get past the calibration screen for a month.
7. My conclusion as well, that its a hardware problem, unfortunatel where I live I dont have Tmobile and the screen from touch pro is slightly different in size to the tmobile variant.
8. Hence it was a brick!!!!
9. After a month just last week, I thought of trying to flash back to 6.5 and see if it works.
10. Went calibrating in circles for about 10 times and guess wat!!!! It starts up!!!!
Now my conclusions are as good as anyones, it cant be an hardware issue. I am trying to find a solution so I can reflash my ROM and go to a stable version and live with my phone atleast for an year.
The Mystic ROM lite version has touch response software built in, Could this be the issue.
Anyones got any idea let me know
Just received my 16gb Galaxy Tab 10.1 from Amazon, really disappointed on it due to constant crash, freeze, lag...etc
ok.. open the package, boot it up, straight feeling sluggish between screen and apps already, then play around with it, install few apps, but it randomly close the apps or just froze without any reason and i have to hard power switch off to reboot.
Thinking it might incompatible apps, but apparently not.. it randomly freeze when open "setting", "google maps", "Quick Office HD"...
I done wipe/factory reset but still the same...
So.. guys think it is hardware related or software related? will restore 3.1 fix this issue? If possible, where do i get the vanila stock 3.1 honeycomb firmware and will it void warranty if i install it via say.. Odin?
I'm in Australia, so sending it back to US for warranty will be quite a pain... any help will be appreciated~
Thanks
by freeze do you mean the touch screen is unresponsive? the same thing started happening to mine today. i called amazon and am getting a replacement for free just call them they will send one out before you ship the one you have. I called today and am getting mine tomorrow but im worried because this is the second tab i had to get replaced.
I am waiting for my SGT from amazon to arrive now
hope it would be good unit
I am from Iraq it is so much difficult to return it to US
It should of shipped with 3.1 mate
Like all things that are mass produced you get some lemons in the mix sounds like you may have one
Sent from my HTC Desire HD using XDA App
I would reflash the 3.1 update via odin and hope that fixes it
I couldn't risk the no warrany do I got mine from mobicity.com.au as it comes with 1yr Australian warranty
Sent from my HTC Desire HD using XDA App
tonyurquiza said:
by freeze do you mean the touch screen is unresponsive? the same thing started happening to mine today.
Click to expand...
Click to collapse
ya, the screen is unresponsive but hard restart temporary fixed the problem.. still, problem still there
tonyurquiza said:
i called amazon and am getting a replacement for free just call them they will send one out before you ship the one you have. I called today and am getting mine tomorrow but im worried because this is the second tab i had to get replaced.
Click to expand...
Click to collapse
Problem is i'm in Australia, and i need to ship it to forwarder and ship via them to me which cost $55 per shipment...
yeah i had to lock then unlock and it fixes it for a couple of minutes then same problem, mine eventually fixed itself and has been working fine maybe wait a bit keep trying mine seems to work now do a factory wipe and keep trying .
Framedtrash said:
I would reflash the 3.1 update via odin and hope that fixes it
Click to expand...
Click to collapse
Where do i get this file from? And will it void the warranty even though i flashed the stock 3.1 honeycomb?
tonyurquiza said:
yeah i had to lock then unlock and it fixes it for a couple of minutes then same problem, mine eventually fixed itself and has been working fine maybe wait a bit keep trying mine seems to work now do a factory wipe and keep trying .
Click to expand...
Click to collapse
This happens to me as well with my SGT. I notice the keyboard will "stop responding" while typing over GTalk or something. Also the navigation keys will become unresponsive while browsing. A lock/unlock of the device seems to fix it.
A friend of mine was researching this, and on other forums people are complaining of the same thing, and apparently it's a part software, part hardware issue. I guess the sensors in the device loose track of where your tapping on the screen. I'm to try a factory reset and see what happens.
kklung said:
Where do i get this file from? And will it void the warranty even though i flashed the stock 3.1 honeycomb?
Click to expand...
Click to collapse
I'm sure you could find it in the development section, not sure if it will void the warranty though. I'm tempted to try this as well if the factory reset will not work.
Strange. I received my 32GB from Amazon on Monday and haven't had any issues at all. Sounds like you got a lemon.
Well, fwiw, I had a GT 10.1 and returned it for 2 reasons:
1) Screen has a dancing/moving part of the panel (towards the middle), where even when OFF, the LCD panel would reflect light in various sheens -- kind of like a think layer of oil on top of water. Slightly depressing the panel would get it to shift and move, and sometimes disappear; only to reappear.
2) Copied 350+MB of .jpegs onto the device, and it took 5.5 hours (yes, hours), to copy the data.
So, I returned the unit. In all fairness, I've got a friend who has a xoom, and had him try copying the data, and got the same results... so #2 is probably a Honeycomb bug, but #1 is definitely a GT defect. I'm now awaiting a Toshiba Thrive
gregoz1 said:
Well, fwiw, I had a GT 10.1 and returned it for 2 reasons:
1) Screen has a dancing/moving part of the panel (towards the middle), where even when OFF, the LCD panel would reflect light in various sheens -- kind of like a think layer of oil on top of water. Slightly depressing the panel would get it to shift and move, and sometimes disappear; only to reappear.
2) Copied 350+MB of .jpegs onto the device, and it took 5.5 hours (yes, hours), to copy the data.
So, I returned the unit. In all fairness, I've got a friend who has a xoom, and had him try copying the data, and got the same results... so #2 is probably a Honeycomb bug, but #1 is definitely a GT defect. I'm now awaiting a Toshiba Thrive
Click to expand...
Click to collapse
5 hours? I'm going to test that right now.
So you guys think i should return it? It cost $55 send from Australia to US and another $55 send from US forwarder to me... or should i try to flash stock 3.1 first? But.. where do i get 3.1 stock firmware? Any links will be much appreciated.
kklung said:
So you guys think i should return it? It cost $55 send from Australia to US and another $55 send from US forwarder to me... or should i try to flash stock 3.1 first? But.. where do i get 3.1 stock firmware? Any links will be much appreciated.
Click to expand...
Click to collapse
You can try this post in the development section. I've only had my Tab for a few days so I haven't had time to tinker with it much. I'm going to try returning mine first for a replacement. If that doesn't do the trick I may try a reload from the link here:
http://forum.xda-developers.com/showthread.php?t=1128722
gregoz1 said:
Well, fwiw, I had a GT 10.1 and returned it for 2 reasons:
1) Screen has a dancing/moving part of the panel (towards the middle), where even when OFF, the LCD panel would reflect light in various sheens -- kind of like a think layer of oil on top of water. Slightly depressing the panel would get it to shift and move, and sometimes disappear; only to reappear.
2) Copied 350+MB of .jpegs onto the device, and it took 5.5 hours (yes, hours), to copy the data.
So, I returned the unit. In all fairness, I've got a friend who has a xoom, and had him try copying the data, and got the same results... so #2 is probably a Honeycomb bug, but #1 is definitely a GT defect. I'm now awaiting a Toshiba Thrive
Click to expand...
Click to collapse
I bought the 16gb white version at Best Buy union square on June 12th, and returned it for the same 1) problem on the screen. The second one seemed to be ok, until the second day of use I saw the "oil" mark appearing and moving depending on where I holded/pressed the tab on the back.
But know I have to say the problem doesn't exist anymore. I think it is because of the packaging and the fact the tab stayed a lot of time in the same position before it arrives to your hands. I recommend use it for a week and see if the problem persists.
or they manufactured them in china...
people also report dust in their tabs, which is pretty much proof of cheap manufacturing.
I haven't had any issues.
Anybody figured out a real solution? It looks like a reccuring problem through forums. I got mine from Amazon forwaded to Qatar and basically it is unusable. Starts once every10 attempts...freezes after 10-30 seconds.
i have two and i have no issues with either one.
the first one i got was locked - the second is unlocked
i see no performance difference between the two
and both were purchased from amazon.
I bought mine in bestbuy and I still w/o problems... It was locked but nothing to worry using odin to 3.01>root>custom rom... it seem that ther is some galaxy tab 10.1 lemon editions
Hi first of all sorry about my English.
Ok my phone has an at&t froyo i just install superuser, slide loading, the weptop hack and the sim unlocked.
I'm using spb 3d launcher and every time i do a restart it seems that the spb it's working on his on, if a let it awake charging some times it's go to some shortcut like if i press it but i didn't (that didn't bother me too much ).
but two days ago one part of the top of the touch screen stop working i can't select the shortcuts on the top of the screen. and yersterday the phone got possessed and start opening thinks randomly. i just uninstall spb and it seems to stop with the gibberish. but today it's the same i can't use phone because i just simple touch the screen and it start again with the gibberish movements.
i'm going to do a restore and i if that fix the gibberish but the part of the screen that doesn't respond is what i worry the most. I'm from Tijuana, Mexico i buy the atrix on craiglist from some guy in san diego, ca. he said that the phone was warranty until feb 2012.
Please help any one
I reset my phone and still the same parts of the screen does not respond and the screen start shaking and doing thing uncontrol.
Please could be sw or is the hardware and i need to change the phone.
Sounds like a hardware problem.
Not sure what the problem could be.....there's a girl I know who's had similar problems, I'll ask her or put you in touch with her. Sounds like yer digitizer?
hansel79 said:
Hi first of all sorry about my English.
Ok my phone has an at&t froyo i just install superuser, slide loading, the weptop hack and the sim unlocked.
I'm using spb 3d launcher and every time i do a restart it seems that the spb it's working on his on, if a let it awake charging some times it's go to some shortcut like if i press it but i didn't (that didn't bother me too much ).
but two days ago one part of the top of the touch screen stop working i can't select the shortcuts on the top of the screen. and yersterday the phone got possessed and start opening thinks randomly. i just uninstall spb and it seems to stop with the gibberish. but today it's the same i can't use phone because i just simple touch the screen and it start again with the gibberish movements.
i'm going to do a restore and i if that fix the gibberish but the part of the screen that doesn't respond is what i worry the most. I'm from Tijuana, Mexico i buy the atrix on craiglist from some guy in san diego, ca. he said that the phone was warranty until feb 2012.
Click to expand...
Click to collapse
I am having the same issue, this was on CM7 only flashed yesterday and then I tried to restore my backup rom and this has the same issue??
Hope someone can sort out the problem.
It sounds like a hardware problem in which you should;
A) buy a whole new screen and install it (they will give you the tools to take it apart)
B) Send it back to Motorola if you haven't voided your warranty by unlocking the phone
or
C) this is a long shot as I do think it is hardware related, you should try this fix just to be sure that it is a hardware problem. Mind you this will do nothing more than refresh the .pds file that affects the touchscreen. Touchscreen fix!
definetly sounds like a broken digitizer to me
I have taken my phone in for repair(Not a official MOTO repairer) and I just got a phone call, he believes it is a software issue? I am not convinced, because I have tried 4 different roms? He said he is going to format/wipe phone. I told him I have installed roms to replace software and I thought that this would wipe/replace software problem?
Anyway I guess, I will found out if it sorts out the random screen movement and widget press?
fatall said:
I have taken my phone in for repair(Not a official MOTO repairer) and I just got a phone call, he believes it is a software issue? I am not convinced, because I have tried 4 different roms? He said he is going to format/wipe phone. I told him I have installed roms to replace software and I thought that this would wipe/replace software problem?
Anyway I guess, I will found out if it sorts out the random screen movement and widget press?
Click to expand...
Click to collapse
I got the phone back yesterday, all working ok.
I quickly broke it again by trying to install a stock rom and then root it, but it introduced the same random screen/widget issues(I tried wipe/format, but no good?). I then install 2 custom rom, CM7 and Aura and I still had problems, then I install HomeBase and problem has been sorted. Have no idea why it fixed the issue just happy it is fixed. Just to have refrain from installing other roms......for now anyway
fatall said:
I got the phone back yesterday, all working ok.
I quickly broke it again by trying to install a stock rom and then root it, but it introduced the same random screen/widget issues(I tried wipe/format, but no good?). I then install 2 custom rom, CM7 and Aura and I still had problems, then I install HomeBase and problem has been sorted. Have no idea why it fixed the issue just happy it is fixed. Just to have refrain from installing other roms......for now anyway
Click to expand...
Click to collapse
I spoke to soon, last night it started the random screen judder and random widget pressing.....
I am not sure what is going on....I've had the phone for about 12 days now(second hand from eBay) and for the first 4-5 days the phone was fine. I then installed CM7 and for about 12-24 hours the phone was ok. Then the random screen/widget issues happened. Did many, many wipe's/formats of various roms and all these issue occurred more or less straight away.
Then I installed HomeBase and for about 6-8 hours, all was ok until lastnight. I guess it is either new motherboard time or new phone time....
Hi guys, im currently facing a problem with my neo v. normally, i use my phone without any problem, but recently, my phone start to have a problem. whenever i turn on the phone, all was there is just a blank black screen, without any display. meaning to say that the screen is going black all the time. im pretty sure the os is still intact because whenever i call or text the number, the notification tone still function, means the phone still can use. is it the lcd faulty or the hardware ? can any of you provide me a solution? except telling me to go and replace the lcd screen, because imma student, and, well dont really have much money to repair all this things and what not. thanks in advance.
yakuzado said:
Hi guys, im currently facing a problem with my neo v. normally, i use my phone without any problem, but recently, my phone start to have a problem. whenever i turn on the phone, all was there is just a blank black screen, without any display. meaning to say that the screen is going black all the time. im pretty sure the os is still intact because whenever i call or text the number, the notification tone still function, means the phone still can use. is it the lcd faulty or the hardware ? can any of you provide me a solution? except telling me to go and replace the lcd screen, because imma student, and, well dont really have much money to repair all this things and what not. thanks in advance.
Click to expand...
Click to collapse
we need more info.
What android version are you on?
Have you rooted/unlocked your bootloader?
What ROM are you using?
What kernel are you using?
What other modifications have you done?
What was the last thing you did before this problem occured?
well my bad because of short explaination
i am running android 4.0.4, rooted and unlocked bootloader, with AOSP rom. the last thing i'd remember was flashing the rom. i think maybe because i have dropped my phone on the floor, so the hardware become malfunction. just my assumption.
yakuzado said:
well my bad because of short explaination
i am running android 4.0.4, rooted and unlocked bootloader, with AOSP rom. the last thing i'd remember was flashing the rom. i think maybe because i have dropped my phone on the floor, so the hardware become malfunction. just my assumption.
Click to expand...
Click to collapse
You dropped the phone, and now its not working....its not too hard to figure out what happened.
The screen is broke and no amount of flashing will bring it back.
Its time to put your hand in your pocket and pay to get it fixed. If you can afford to take it back to the shop then try ebay to get a screen and fit it yourself.
well thats great. thanks for helping me throughout this thing. will try to solve this problem ASAP.
Hey everyone, so my wife has the Poco F1 and broke the screen after just 2 weeks. I bought a replacement screen and front housing from aliexpress and got it yesterday. I tried changing the screen last night and almost everything sent fine. Turn the phone on and the display works but does not recognize any touch input.
I re-open the phone and disconnect and re-connect the display flex cable a few times all with same result.
I'm thinking probably a bad screen replacement but just wanted to see if anyone have any suggestions
r.sorujlall said:
Hey everyone, so my wife has the Poco F1 and broke the screen after just 2 weeks. I bought a replacement screen and front housing from aliexpress and got it yesterday. I tried changing the screen last night and almost everything sent fine. Turn the phone on and the display works but does not recognize any touch input.
I re-open the phone and disconnect and re-connect the display flex cable a few times all with same result.
I'm thinking probably a bad screen replacement but just wanted to see if anyone have any suggestions
Click to expand...
Click to collapse
Why would you try and fix it yourself when you have the warranty with you? Xiaomi can fix your phone. Maybe there's service charge (new screen replacement, labour, new warranty I guess).
Darklouis said:
Why would you try and fix it yourself when you have the warranty with you? Xiaomi can fix your phone. Maybe there's service charge (new screen replacement, labour, new warranty I guess).
Click to expand...
Click to collapse
I live in South America. there are no service center in my country. Bought off amazon. not sure how warranty would work if at all it applied to my case.
Bought it off US amazon using a package forwarding service that had it shipped to a address in US when they receive it for me and then re-ship it to my country where i pickup from them.
Pretty sure warranty would be almost impossible to claim
r.sorujlall said:
I live in South America. there are no service center in my country. Bought off amazon. not sure how warranty would work if at all it applied to my case.
Bought it off US amazon using a package forwarding service that had it shipped to a address in US when they receive it for me and then re-ship it to my country where i pickup from them.
Pretty sure warranty would be almost impossible to claim
Click to expand...
Click to collapse
Sorry to hear that.
Alright there must be something you forgot.
Watch JerryRigsEverything's video in teardown of Pocophone. There must be something you forgot to connect with.
I am 99% sure that you missed something. I will replace a Redmi Note 4 screen tomorrow (similar hard work I think).
I recommend to disassembe and re-assemble again before you report and ask for a full refund or a re-send.
You should record that all cable in place and screen not functional if it's still a problem after you remove and reassemble to use as eveidnce for full refund.
Of course in this case ask them to send a tested one before you report. They will I am sure.
thanks for the advice. I do intend to do a full disassembly and try again.
I hope it did forget something during assembly but it's just one flex cable and i disconnect and re-connect multiple times. I also did watch a screen repair guide on youtube before i started and i took pics of everything as i go.
In the end in was forced to re-install the old cracked screen as my wife needed the phone. with the cracked screen the touch works. so it's weird that i would forget something with the replacement screen but not when putting back on the old screen
r.sorujlall said:
thanks for the advice. I do intend to do a full disassembly and try again.
I hope it did forget something during assembly but it's just one flex cable and i disconnect and re-connect multiple times. I also did watch a screen repair guide on youtube before i started and i took pics of everything as i go.
In the end in was forced to re-install the old cracked screen as my wife needed the phone. with the cracked screen the touch works. so it's weird that i would forget something with the replacement screen but not when putting back on the old screen
Click to expand...
Click to collapse
Usually it is an issue with the drivers. The cheap Aliexpress screens have this issue on some phones.
By the way, which ROM are you using? Sometimes these screens work with stock ROM but not with custom ROMs. So you can also try a few versions of the stock ROM and see whether the issue resolves.
Mine kinda died yesterday, after resetting the phone I got stucked inside twrp, not recognizing any touches. Then I flashed fastboot rom, touch still doesn't work. Did you get yours fixed? How?
Touch screen issues
MM.626 said:
Mine kinda died yesterday, after resetting the phone I got stucked inside twrp, not recognizing any touches. Then I flashed fastboot rom, touch still doesn't work. Did you get yours fixed? How?
Click to expand...
Click to collapse
Hey i have the same problem right now. Did you find any fix???
There is an old thread like this where they flashed the stock rom from miflash and it fixed the issue.
darjks said:
Hey i have the same problem right now. Did you find any fix???
Click to expand...
Click to collapse
yea i found the fix, but u will need a computer. Boot your poco to fastboot mode and flash the latest twrp image. Only latest twrp working, others (red, orange, etc gave me touch issues).
---------- Post added at 03:00 PM ---------- Previous post was at 02:59 PM ----------
ryan7646 said:
There is an old thread like this where they flashed the stock rom from miflash and it fixed the issue.
Click to expand...
Click to collapse
this also works but time consuming
My poco touch not work and when i pushed with some energy display flickring
Tomorrow i am use my phone like daily but at evening
My touch some times work and some times not i think its because of am not update my device but when i click settings i click on about device touch not respond am restart my phone not respond then i unlock bootloader and flash latest rom but not working plz anyone help ? because of lock down am not go service centre
MM.626 said:
yea i found the fix, but u will need a computer. Boot your poco to fastboot mode and flash the latest twrp image. Only latest twrp working, others (red, orange, etc gave me touch issues).
---------- Post added at 03:00 PM ---------- Previous post was at 02:59 PM ----------
this also works but time consuming
Click to expand...
Click to collapse
Hey mate. could you help me out with this?
I installed new screen. I bought it years ago, but only now i got to do it. Anyways. No touch Screen seems to work fine otherwise. You mentioned about installing new TWRP to fix it? I've downloaded Platform-tools, ADB drives, looking for Magisk now ... Is this the right TWRP file > me.twrp.twrpapp-26.apk or > twrp-3.3.0-0-beryllium.img this one? How it is done from PC?
Ok, so i got pattern unlock. Connecting my mouse via OTG works, BUT i can not enter this pattern. I just cant get the line started. (OTG with same mouse works well in Galaxy S10, doing pattern unlock).
Looks like i have my debugging on, but boot loader is locked and because i cant get into menu, so i can not accept connections or change anything. What are my options here guys??
ADB shows what my device is unauthorised, but i can copy files and **** in windows.
Update.
I've done factory reset, unlocked the phone (bootloader). USB debugging he whole lot. Flashed latest 3.3.0.0 twrp and it did not fixed the touch issue, but i found out what screen registers a lot of touches. Like i click on everything like crazy. Will try to take the screen off completely tomorrow. See if i can use new screen with old PCB (from old broken screen). I bet i am going to brake it and end up with ordering new screen
Update 2.
It is impossible to split LCD screen from its PCB. In the process of taking off new screen, even tho i've done it super careful and screen looks mint, it does not turn on (just stays black). Visually no damage. I wander if i could overheat it while removing. But it looks intact.
Ordered new screen. Will update you later.
Well, eventually got a new screen. Got one dead pixel in it. But it is all glued in right now. So i don't know if i bother to change. It doesn't bother me, cant really see it most of the time.