Related
Goodafternoon,
I tried to root my Honor 7, but failed, don't know why, was stuck in a bootloop. Then I unfortunately deleted the whole system with TWRP recovery..
Then I downloaded the current ROM from a forum called modaco which seemed to be trustworthy and extracted it with HuaweiUpdateExtractor to then install the data with fastboot. I installed everything like system, boot, data etc. and everything works fine, except for the internal storage. Normally it should have about 13 GBs, but now has less than 3. When I go to Storage in the settings, it tells me I only have 3 GB internal storage in total.
As I don't exactly know how to describe this problem and therefore don't know how to google it, I ask you. If you need some more information let me know.
Would be very kind if anybody could help me or have some advices as I am not a real genius in doing such things.
Thanks!!
Hi,
First of all, is the custom rom deodexed ?
because on stock rom ( emui ) , you juste have to go into recovery, then factory reset, with a Custom, idk
I can only tell you before trying factory reset, make a full backup, then you could try
Maxdr13 said:
Goodafternoon,
I tried to root my Honor 7, but failed, don't know why, was stuck in a bootloop. Then I unfortunately deleted the whole system with TWRP recovery..
Then I downloaded the current ROM from a forum called modaco which seemed to be trustworthy and extracted it with HuaweiUpdateExtractor to then install the data with fastboot. I installed everything like system, boot, data etc. and everything works fine, except for the internal storage. Normally it should have about 13 GBs, but now has less than 3. When I go to Storage in the settings, it tells me I only have 3 GB internal storage in total.
As I don't exactly know how to describe this problem and therefore don't know how to google it, I ask you. If you need some more information let me know.
Would be very kind if anybody could help me or have some advices as I am not a real genius in doing such things.
Thanks!!
Click to expand...
Click to collapse
After manually flashing all the .img files you should perform a force update aka three button update, by putting the same version of UPDATE.APP from which you extracted those .img files.
DigiGoon said:
After manually flashing all the .img files you should perform a force update aka three button update, by putting the same version of UPDATE.APP from which you extracted those .img files.
Click to expand...
Click to collapse
So you mean, I have to flash the phone with bootloader with the extracted files from update.app and then put it on my SD card and manually update my phone with exactly that update.app file? or am I wrong? I already tried something similar, but couldn't find the option in my honor 7 in the update settings, to manually update (I have put the update.app on my sd card).
I tried to install another ROM (MoDaCo - ROM) with hard resets etc. but didn't solve the problem.
I do exactly have 3.87 GBs of internal storage after flashing the new ROMs or update.app files. I found somebody else with the exact same problem. He solved it by hard resetting his phone with the TWRP recovery, but didn't work for me. In that forum they told him, he has some "ghost ROMs" on his phone, from flashing his phone before.
If you do have any ideas or clues for me, don't hesitate to tell me. And thanks for your help!!
Maxdr13 said:
So you mean, I have to flash the phone with bootloader with the extracted files from update.app and then put it on my SD card and manually update my phone with exactly that update.app file?
Click to expand...
Click to collapse
Yes, you have to do exactly that, flash files like cust.img, system.img, recovery.img, userdata.img(DELETES YOUR DATA), boot.img after extracting them using Huawei Extractor tool from UPDATE.APP.
After you do that follow below steps:
Put that UPDATE.APP in dload folder in your External SDCARD.
Switch off your phone.
Press the three button combo (Vol UP + Vol DOWN + Power).
After this your whole device will get flashed with that UPDATE.APP file you put in dload folder.
Try these steps, then tell me if the problem still persisits. I hope this solves it.
DigiGoon said:
Yes, you have to do exactly that, flash files like cust.img, system.img, recovery.img, userdata.img(DELETES YOUR DATA), boot.img after extracting them using Huawei Extractor tool from UPDATE.APP.
After you do that follow below steps:
Put that UPDATE.APP in dload folder in your External SDCARD.
Switch off your phone.
Press the three button combo (Vol UP + Vol DOWN + Power).
After this your whole device will get flashed with that UPDATE.APP file you put in dload folder.
Try these steps, then tell me if the problem still persisits. I hope this solves it.
Click to expand...
Click to collapse
Thanks! That's what I'll try tomorrow! I will let you know if it helped.
Maxdr13 said:
Thanks! That's what I'll try tomorrow! I will let you know if it helped.
Click to expand...
Click to collapse
Good luck!
DigiGoon said:
Good luck!
Click to expand...
Click to collapse
Sorry last question:
Currently I have the custom MoDaCo ROM installed (don't know if you know it). To follow the steps you mentioned above, do I have to get back to stock ROM first, or can I just leave ROM as it is and flash it?
Thanks.
Maxdr13 said:
Sorry last question:
Currently I have the custom MoDaCo ROM installed (don't know if you know it). To follow the steps you mentioned above, do I have to get back to stock ROM first, or can I just leave ROM as it is and flash it?
Thanks.
Click to expand...
Click to collapse
No you can leave it as it is, it will get wiped in the process.
DigiGoon said:
No you can leave it as it is, it will get wiped in the process.
Click to expand...
Click to collapse
Thank you so much, everything went fine! Great!
To update my firmware in future, I have to download the new update.app and do the 3 button update, right? Or any other way? Are OTA updates no more possible?
Thanks again :laugh:
@Maxdr13 If you are rooted, then flash manually the img files then do a three button update, but if you are on stock ROM and recovery, just dong three button update by putting UPDATE.APP in dload folder will do.
DigiGoon said:
@Maxdr13 If you are rooted, then flash manually the img files then do a three button update, but if you are on stock ROM and recovery, just dong three button update by putting UPDATE.APP in dload folder will do.
Click to expand...
Click to collapse
and userdata etc. won't be wiped with the three button update (phone is not rooted) ? is there no chance to get back to normal status so I can update with OTA?
@Maxdr13 I can't confirm about userdata, as once I did a three button update my data was intact, but some people also reported that data gets wiped, and after the three button update you will get OTAs.
DigiGoon said:
@Maxdr13 I can't confirm about userdata, as once I did a three button update my data was intact, but some people also reported that data gets wiped, and after the three button update you will get OTAs.
Click to expand...
Click to collapse
@DigiGoon thanks mate! Great help
@Maxdr13 You're welcome, always here to help.
Hey guys,
I've had a total of 4 android smartphones during the last years, and I did root all of them and even install diferent ROM's, but on this phone (Honor 7) was kinda diferent.
The root process is way more complex than all the other androids I did root (simply flash a .zip file...) so I've been post-poning this task over and over..
Finally yesterday I gained courage to try out rooting my phone, and while attempting to root my Honor 7, after flashing SuperSU from TWRP, my phone no longer booted.
Stressed as I was, I just told to myself "f*ck it" and formatted the system and I didn't care much if there was a fix without needing to format the system. (but then I realised that I could not find any .img ROM files to flash from TWRP recovery, so basically I did my actions wrong once again)
I followed the tutorial from guidebeats.com which talks about rooting EMUI 4.0 Android 6.0 (I cant post links)
Basically this is the story:
While unlocking the bootloader, even though, the tutorial said the phone would reboot itself after typing "flashboot oem unlock 1234934829" I did a hard reboot (or reset?) holding (VOL+) + Power button and I have the feeling that the bootloader unlock was not 100% done, even if it said it was unlocked. (Phone was working perfectly fine there)
Then I flashed SuperSU, and I could no longer boot. After powering up my phone, after the first splashscreen, the screen would only turn black.
What (I think) I need to now is remove the TWRP recovery, and use the stock one and attempt to install an "update" using (Vol+) + (Vol-) + Power. (please correct me if I'm wrong)
But now there's some issues I got that I'd like some help with:
1- How can I get back to the stock recovery? (NOTE: I currently got no OS installed on my Honor 7, since I formated it)
2- Will I need to lock and unlock my bootloader again (if I want to 'fix' the bootloader unlock?)
3- Where can I get official Honor 7 stock ROM? (would be awesome if there was already the Android 6 stock rom for a clean install)
4- What are the steps on this tool (Honor 7 Multi-Tool) to root my phone?
I need my Honor 7 asap
Sorry for the long post, It's my first time doing a more advanced root and I have all these questions.
Thank you very much for any kind help!
joaomPT said:
Hey guys,
I've had a total of 4 android smartphones during the last years, and I did root all of them and even install diferent ROM's, but on this phone (Honor 7) was kinda diferent.
The root process is way more complex than all the other androids I did root (simply flash a .zip file...) so I've been post-poning this task over and over..
Finally yesterday I gained courage to try out rooting my phone, and while attempting to root my Honor 7, after flashing SuperSU from TWRP, my phone no longer booted.
Stressed as I was, I just told to myself "f*ck it" and formatted the system and I didn't care much if there was a fix without needing to format the system. (but then I realised that I could not find any .img ROM files to flash from TWRP recovery, so basically I did my actions wrong once again)
I followed the tutorial from guidebeats.com which talks about rooting EMUI 4.0 Android 6.0 (I cant post links)
Basically this is the story:
While unlocking the bootloader, even though, the tutorial said the phone would reboot itself after typing "flashboot oem unlock 1234934829" I did a hard reboot (or reset?) holding (VOL+) + Power button and I have the feeling that the bootloader unlock was not 100% done, even if it said it was unlocked. (Phone was working perfectly fine there)
Then I flashed SuperSU, and I could no longer boot. After powering up my phone, after the first splashscreen, the screen would only turn black.
What (I think) I need to now is remove the TWRP recovery, and use the stock one and attempt to install an "update" using (Vol+) + (Vol-) + Power. (please correct me if I'm wrong)
But now there's some issues I got that I'd like some help with:
1- How can I get back to the stock recovery? (NOTE: I currently got no OS installed on my Honor 7, since I formated it)
2- Will I need to lock and unlock my bootloader again (if I want to 'fix' the bootloader unlock?)
3- Where can I get official Honor 7 stock ROM? (would be awesome if there was already the Android 6 stock rom for a clean install)
4- What are the steps on this tool (Honor 7 Multi-Tool) to root my phone?
I need my Honor 7 asap
Sorry for the long post, It's my first time doing a more advanced root and I have all these questions.
Thank you very much for any kind help!
Click to expand...
Click to collapse
As you are already familiar with adb and other stuff so will write a short post for you.
To download latest firmware, head to
http://forum.xda-developers.com/hon...tock-firmware-packages-honor-7-t3448747/page1
Google, download and install Huawei update extractor and open UPDATE.APP in it (obtained after extracting firmware).
You can see all the images. Just extract recovery and boot to platform-tools folder.
Meantime, do the unlocking command again, with
Fastboot OEM unlock xxxxxxxxxxxxxxxx
Followed by fastboot reboot
And press and hold the vol down button again until you reboot in bootloader.
Flash the recovery and boot you extracted using
Fastboot flash recovery recovery.img
Fastboot flash boot boot.img
(I got a habit of extracting and flashing system and Cust using
Fastboot flash system system.img
Fastboot flash Cust Cust.img
But they are not necessary)
Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again).
Please do report back if it comes to life.
To root, just flash twrp and then use SuperSU 2.62 (no other version) and update it later using play store.
Sent from my PLK-L01 using XDA Labs
Hey!
Thank you alot for your reply.
From the link you sent about the firmwares, there are alot of Builds for the L01 (EU) model. Can I simply use the latest from the list or I gotta install 1 by 1 (from older to newer)?
Also, the bootloader unlock thing, is it ok if I wait to do it until I install the stock ROM again? Because I think I don't have the code anymore (Also don't know about IMEI)
Other thing, yesterday before bricking my phone, I tried to re-unlock the bootloader as you said above, but it didnt let me because "it was already unlocked".
I really have no idea if it's 100% unlocked or not.
important thing!
With those ROM's, I still have the right to receive official OTA updates from the HiCare app right?
Thank you again
joaomPT said:
Hey!
Thank you alot for your reply.
From the link you sent about the firmwares, there are alot of Builds for the L01 (EU) model. Can I simply use the latest from the list or I gotta install 1 by 1 (from older to newer)?
Also, the bootloader unlock thing, is it ok if I wait to do it until I install the stock ROM again? Because I think I don't have the code anymore (Also don't know about IMEI)
Other thing, yesterday before bricking my phone, I tried to re-unlock the bootloader as you said above, but it didnt let me because "it was already unlocked".
I really have no idea if it's 100% unlocked or not.
important thing!
With those ROM's, I still have the right to receive official OTA updates from the HiCare app right?
Thank you again
Click to expand...
Click to collapse
Just use B380 as it's the latest full firmware available there.
Unlocking bootloader again was just a precautionary measure (proceed without it and if it is not 100% unlocked and if something goes wrong, we can troubleshoot later, which imo, won't happen)
And yep, if you keep the firmware as it is, but if you flash twrp and root, you will still see the update available in Hicare but will have to install stock recovery again before upgrading. (Nothing else is needed as SuperSU 2.62 gives a systemless root so you only need to flash back stock recovery for an update)
I am not against honor-tool bit it's best to do things manually as it makes you learn stuff and is easy to troubleshoot if something is amiss.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Just use B380 as it's the latest full firmware available there.
Unlocking bootloader again was just a precautionary measure (proceed without it and if it is not 100% unlocked and if something goes wrong, we can troubleshoot later, which imo, won't happen)
And yep, if you keep the firmware as it is, but if you flash twrp and root, you will still see the update available in Hicare but will have to install stock recovery again before upgrading. (Nothing else is needed as SuperSU 2.62 gives a systemless root so you only need to flash back stock recovery for an update)
I am not against honor-tool bit it's best to do things manually as it makes you learn stuff and is easy to troubleshoot if something is amiss.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Alright, btw, about the thing you said
"Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again)."
I gotta do that myself with an "update.app" file or what?
Sorry, I missed that part
Cheers!
joaomPT said:
Alright, btw, about the thing you said
"Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again)."
I gotta do that myself with an "update.app" file or what?
Sorry, I missed that part
Cheers!
Click to expand...
Click to collapse
You have to make a dload folder in SD card and copy UPDATE.APP to that folder.
Then just turn off the phone, press and hold power + vol up + vol down until phone boots.
Let go of power but keep others two pressed for 5, 6 sec more. Your phone will boot into recovery and start installing UPDATE.APP
It likes to get stuck at 5% (most reports) but sometimes, somewhere else. If its stuck for 15 minutes on a particular percentage, just press and hold the above three buttons again using the same process.
Multiple tries make it work...
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You have to make a dload folder in SD card and copy UPDATE.APP to that folder.
Then just turn off the phone, press and hold power + vol up + vol down until phone boots.
Let go of power but keep others two pressed for 5, 6 sec more. Your phone will boot into recovery and start installing UPDATE.APP
It likes to get stuck at 5% (most reports) but sometimes, somewhere else. If its stuck for 15 minutes on a particular percentage, just press and hold the above three buttons again using the same process.
Multiple tries make it work...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Hey man!
Good news, my phone is alive and root is done.
The problem was on the SuperSU that I flashed, it was version 2.71, instead of the one you said » version 2.62 «
I cant thank you enough!! Can I pay you a coffee?
Thank you!
joaomPT said:
Hey man!
Good news, my phone is alive and root is done.
The problem was on the SuperSU that I flashed, it was version 2.71, instead of the one you said �?�» version 2.62 �?�«
I cant thank you enough!! Can I pay you a coffee?
Thank you!
Click to expand...
Click to collapse
That's great... Enjoy your phone and as for coffee, well, let's say, you owe me one and we will leave it at that
Better yet, you can search DigiGoon and pay him for the coffee, he taught me what I told you.
You can find him somewhere in this thread
http://forum.xda-developers.com/honor-5x/help/honor-5x-kiw-ul00-boot-loop-t3449554/page1
Decision is yours
muradulislam said:
That's great... Enjoy your phone and as for coffee, well, let's say, you owe me one and we will leave it at that
Better yet, you can search DigiGoon and pay him for the coffee, he taught me what I told you.
Whichever you like...
Click to expand...
Click to collapse
Alright man, cheers
joaomPT said:
Alright man, cheers
Click to expand...
Click to collapse
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
tgergo said:
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
Click to expand...
Click to collapse
Hello.
Do you have unlocked bootloader and TWRP recovery? You can format your phone from TWRP recovery.
I think the only option for you is to get the old ROM img and flash it (starting from 0)
You can dirty-flash (Flash a different ROM with same android version as yours, e.g: flashing custom android 5 ROM over your stock android 5 ROM without factory resetting your phone) but I dont think you can do that from Android 6 to 5.
joaomPT said:
Hello.
Do you have unlocked bootloader and TWRP recovery? You can format your phone from TWRP recovery.
I think the only option for you is to get the old ROM img and flash it (starting from 0)
You can dirty-flash (Flash a different ROM with same android version as yours, e.g: flashing custom android 5 ROM over your stock android 5 ROM without factory resetting your phone) but I dont think you can do that from Android 6 to 5.
Click to expand...
Click to collapse
Yes I have unlocked bootloader and currently not twrp but I can flash it at any time.
The last two paragraphs you wrote are different solutions or the last one is a more detailed explanation of the previous?
I have android 6 so the later method won't work as you said.
But formatting it and flashing a stock android 5 rom - is it that simple? Nobody here suggested this before, however I have been asking for months.
All the phones are empty when they leave the assembly line.
How did you flash the new rom to your formatted phone? Extracted update.app and flashed each file with fastboot? Any issues you faced?
tgergo said:
Yes I have unlocked bootloader and currently not twrp but I can flash it at any time.
The last two paragraphs you wrote are different solutions or the last one is a more detailed explanation of the previous?
I have android 6 so the later method won't work as you said.
But formatting it and flashing a stock android 5 rom - is it that simple? Nobody here suggested this before, however I have been asking for months.
All the phones are empty when they leave the assembly line.
How did you flash the new rom to your formatted phone? Extracted update.app and flashed each file with fastboot? Any issues you faced?
Click to expand...
Click to collapse
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
joaomPT said:
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
Click to expand...
Click to collapse
I'll try... But seems too simple to be true...
joaomPT said:
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
Click to expand...
Click to collapse
Hi again,
I'm doing this OS installation now. It starts fine but stucks at 90%, (I'm trying to install the latest stock ROM which can be downloaded from Huawei site, B220 or221). Did you have the same issue? I waited more than half an hour at 90% but did not go on.
tgergo said:
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
Click to expand...
Click to collapse
Maybe formatting, Flash stock Android 5 recovery using Honor multitool , and then Flash a Android 5 firmware
Not sure it Will Work without rollback..
Finally, after 2 months of struggling I managed to get back to Android 5 and EMUI 3.1 without a rollback file.
Here is what I did:
0. Download a full ROM you want to install
1. Backup of the current system with Hisuite (everything. Apps, media, contacts, call log, etc.)
2. Flash TWRP recovery with fastboot (start phone in fastboot mode)
3. Wipe (and format!) everything you can with TWRP
4. Extract boot.img and recovery.img from update.app of the new ROM with Huawei Update Extractor
5. Flash boot.img and recovery.img with fastboot.
6. Copy update app to dload folder on SD card, insert into the phone.
7. Restart phone with [VOL+] + [VOL-] + [Power] buttons to force update.
8. The system will be installed from SD card. I had no issues with the installation. First I did not format the phone (just wiped) and it did not work.
9. Restore data from backup.
The only strange thing is that the native app icons look different than my previous lollipop system. Don't know why. They are less colorful. I installed C00B220 for PLK-AL10.
tgergo said:
Finally, after 2 months of struggling I managed to get back to Android 5 and EMUI 3.1 without a rollback file.
Here is what I did:
0. Download a full ROM you want to install
1. Backup of the current system with Hisuite (everything. Apps, media, contacts, call log, etc.)
2. Flash TWRP recovery with fastboot (start phone in fastboot mode)
3. Wipe (and format!) everything you can with TWRP
4. Extract boot.img and recovery.img from update.app of the new ROM with Huawei Update Extractor
5. Flash boot.img and recovery.img with fastboot.
6. Copy update app to dload folder on SD card, insert into the phone.
7. Restart phone with [VOL+] + [VOL-] + [Power] buttons to force update.
8. The system will be installed from SD card. I had no issues with the installation. First I did not format the phone (just wiped) and it did not work.
9. Restore data from backup.
The only strange thing is that the native app icons look different than my previous lollipop system. Don't know why. They are less colorful. I installed C00B220 for PLK-AL10.
Click to expand...
Click to collapse
Is this really work? i cant rollback to any version.
Yuaru said:
Is this really work? i cant rollback to any version.
Click to expand...
Click to collapse
Yes it does. (It did for me.) Technically this is not a rollback but installing a brand new system on an empty phone. That's why it is important to do a backup upfront.
tgergo said:
Yes it does. (It did for me.) Technically this is not a rollback but installing a brand new system on an empty phone. That's why it is important to do a backup upfront.
Click to expand...
Click to collapse
Thanks for the answer. Im gonna try this method. I can't reflash any region rom.
Hi guys, i got my H9 yesterday and because i thought i read enough on this forums i wanted to unlock it then install TWRP and install superSU to gain root access and stick with the stock firmware.
Unlocking went perfectly fine,phone booted to OS, than i flashed twrp 3.1.1-1 as advertised here and made a factory reset. Phone was stuck in bootloop for unknown reason.
I made several wipes and somehow managed to check all boxes in the wipe menu which erased the whole OS.
Now i read here that others have the "no OS" problem too but because i still have all unlocked fastboot and twrp i wanted to ask which method is best to flash back the original FW.
Which stock ROM is safe to install? i have european H9 is STF-L09C432B170 the right one for me?
Which method is the best to install it? Copy the 3 zips to internal stoagre via OTG device and install it out of twrp? I read that there is also a force method where users can push vol up, vol down and power simultaneously and enter the huawei install force mode.
I am quite sad that the phone was stuck in bootloop after twrp install and still dont know what caused it. When i install it from twrp there are 3 zips: update, data full public , hw eu. In which order do they have to e installed and is one of them overwriting the TWRP recovery?
Please give me a short hint/procedure, im quite afraid that i cant get my phone back to work and it is brand new. I dont know what caused the unsolvable bootloop.
Best regards and many thanks
Hi.
Check this:
https://forum.xda-developers.com/showpost.php?p=73334439&postcount=1
This help you.
Regards
thanks for the hint but i cant find a solution for me there.
ut this
i copied the 3 .zip files to internal today but TWRP doenst allow me to write them it fails with "write err errno 9"
then i tried to copy the update.pp in DLOAD folder on micro sd but this is not possible because filesize is over 2gb. i tried to format micro sd with twrp to exfat but it till doesnt work. please give me a little hint what to do im completely desperate about the situation.
Today i installed Huawei Multitool and extracted the .img file out of the update.app files, i was able to flash all 4, system, boot, recovery and cust.
Now the rec. menu is back to stock and everything got installed but the phone still isnt booting. i think it is because i missed the userdata.img which i cant find anywhere.
Other users here have the same problem. Is there a firmware package which includes all 5 .img data?
Best regards
i found the official huawei service full repair firmware with all necessary files for unbrick (system, cust, recovery, userdata, boot) flashed them via fastboot but stil device is "hanging" after the warning message that its unlocked. i think it is because i wiped vendor data in twrp but i cant flash vendor.img in fastboot. it is included in the fw package but cant be transfered to phone via fastboot. it stops at part 1/2 because the filesize allowd is around 470mb max but the extracted file has a size of 670. anyone know what to do?
Best regards
You need to go via the Rebrand way with no rebrand. I had the same problem and was trying to use the multitool without success. The oeminfo can be flashed alternatively if it fails during the HWOTA process.
https://forum.xda-developers.com/honor-9/help/how-flash-oeminfo-t3657499
ok i download all the folders with the .bat file. Then i download C432B150 from the czech site and add it to the update folder. Than i rename the 3 files accoding to the manual and run the .bat file but without rebranding right?
Des this tool any different than the HuaweiMultiTool or fastboot with flash command?
Best regards
I treid out HWOTA, the first step installing twrp is successful than i disattach usb cable as described and enter twrp. Then it says in twrp i have to connect again and press enter but then the bat file stops and doenst go on. i dont come to the point where i can choose rebrand or flash firmware.
Whats wrong here?
edit: i saw in the .sh file that the script executes wait_adb but my phone is not entering adb mode as it seems when in main screen of twrp. is this normal or do i have to set it manually in twrp
best regards
I was able to install the B130 now via 3 button recovery. Now im on B130 but cant update elsewhere. Also the 2 capacitive buttons are not working. Bootloader is locked again. Everything is stock and the phone runs great. When i update with the 3 buton method from external sd, which firmware should i use? i tried B150 full OTA but it aborts after 5% with an error. Do i only need to get a small OTA package now?
How can i put my cap. buttons back to work? Too bad only the 3 button method worked to recover the phone.
Best regards and many thanks.
I did the HWOTA with b120 firmware and then used firmware finder to update to b150.
The bug with capacitive buttons is present till Oreo. I use the home button gestures anyways.
Hope it helps.
ok, thats bad but they worked with the initial revision of b130 and b150 when i downloaded it OTA. Is this something like a fuse like.knox at samsung which happens at custom flashing?
Sent from my GT-I9300 using Tapatalk
the HWOTA method doesnt work, the batch file gets stuck after connecting the phone in twrp back to computer. in script it says wait_adb but it is not recognized somehow.
do u know a solution? anotherone here got that problem too.
im very afraid of that, i read here that everything related to twrp 3.1.1-0 and 3.1.1-1 is problematic a lot of people cant boot after installing twrp and can wipe whtever they want the phone never boots fully
whats the difference in the B130/B120 the phone came from huawei and the version flashed via tools? when i got it everything worked
i have this version.
ok so install twrp have frq and bootloader unlocked and then do backup out of recovery? with your file? can you provide download link? is this then a zip file?
I want to solve the thread and how i solved problem.
The B130 service firmware by huawei could be installed via 3 button method, than i was able to go up to the newest B180 via firmwarefinder and DNS method but with not working cap. buttons and flash etc.
Yesterday i installed TWRP 3.1.1-1(temporary) via HWOTA.zip method (ireplaced the older twrp in recovery folder) and successfully installed B120 and got the buttons etc working again. Then installed root and now system works fine and is rooted. My mistake was to install twrp over B130 or B150 which i downloaded OTA at the first day i got the phone. I tested this yesterday to install TWRP along with B150 and unlocked bootloader, infinite bootloop again. With B120 the TWRP 3.1.1-1 works out of the box without any loops.
The 2 trouble solvers where B130 service firmware and HWOTA with B120.
The external SD had to be inserted in card reader on PC because of the large filesize of the B130.
I would recommend to everyone before starting to play with the H9 to move the B130 folders to phone while it is still accessible. When everything bricks like in my case and u still have twrp than you can go to twrp main screen and connect phone to computer to rename the folder with B130 to "dload" and arrange update.app accordingly on PC or in TWRP file manager.
Can i set this topic to [SOLVED] myself?
Best regards
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
this works flawlessly with 3 button method
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
SkaboXD said:
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
Click to expand...
Click to collapse
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
abdul_manan said:
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
Click to expand...
Click to collapse
currently it's not available, you need to wait someone to upload it.
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
redweaver said:
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
Click to expand...
Click to collapse
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Ludba Amb said:
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
Click to expand...
Click to collapse
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
hello everyone i have nokia 1 oreo go edition i don't have any idea how to root
please help me by sending links for :
1 ) nokia 1 (ta-1047 ) TWRP
2 ) nokia 1 custom rom
3 ) nokia 1 current rom (for security)
(remenber thats only model ta-1047)
seriously i want to root it because there are many issues like multitouch screen problem or missing some system apps and also device getting hot because the memory (ram) is lagging (1gb ram is not enough to run android oreo correctly 2018 )
{PLEASE HELP}
help me please !
can you send me a twrp for nokia 1 ta-1047
i need to root my device to dowoad custom rom
MyTH30 said:
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Click to expand...
Click to collapse
Same here. Seems that the decryption does not work. Better make sure your phone is not encrypted before messing with twrp (3.2.3).
Be careful
Some Nokia 1 are a TA 1060 variant number and if you flash the wrong file you are going to have further problems.
The process to root and get TWRP on the nokias Is complicated enough without everyone suggesting wrong model variants / numbers.
I guarantee someone will download the wrong file for the wrong model and come here crying.
is this the real firmware?
inkepinkje said:
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
Click to expand...
Click to collapse
hi, i needed to know if this is the real one, they show it's mt6735 instead mt6737m, I've already downloaded a file with the similar name nd it has scatter file of mt6735, that's while in the sp flash tool,i don't see all of the partitions being detected to flash
Hey i am facing the same issue but i didn't flash any other recovery mode my phone Nokia 1 TA-1056 am getting black screen and only feel the vibration when i press power key and when i put my phone on charging then its shows the display and boot into recovery mode directly can anyone help me how i can overcome this issue
This might help you after realizing that you want to install custom ROM again after upgrading to android 11 MIUI but you cannot install android 10 or 11 based ROM and stuck with either boot loop or android rescue party.
WARNING: This might wipe every writable partition. Charge your phone at least 20% or more to prevent from destroying these partitions.
Instructions:
1. Download firmware from here
2. Download full ROM (either recovery or fastboot) from here
3. Save the firmware zip file it in either internal storage or sdcard. Reboot to TWRP afterwards
4. Tap install and find the zip file in your storage and install. Wait for a couple of seconds to get done.
To install full ROM
Recovery
1. After installing firmware from recovery mode, don't reboot. If you reboot the system it will fail to boot. Boot to fastboot if you fail this step and flash a recovery image. Proceed with next step.
2. Install full ROM flashable zip from sdcard or internal storage.
3. Format /data. Reboot.
Using fastboot
1. Boot from fastboot mode
2. Extract full ROM fastboot zip file.
3. Open miflash and locate the fastboot folder.
4. Choose flash_all. Click start.
5. The phone reboots itself. Boot to recovery mode and wipe data.
All done. The phone is now downgraded from android 11 back to android 10.
Note: I got 2 anti triggered when attempting to downgrade the phone using recovery and fastboot without installing firmware zip file first. RIP me I guess I voided my warranty anyways so doesnt matter as I already applied some insurance for my device.
TL;DR: Installed Recovery will get erased as I mentioned in WARNING. Please don't skip every step.
Edit: since it made confusion, I split steps for recovery and fastboot mode.
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
PYCON said:
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
Click to expand...
Click to collapse
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Steelrock said:
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Click to expand...
Click to collapse
Ok, ok, good to know. I'm just curious... I'll remain with A10 till when A11 will be good enough to be used as a daily driver
Hi. Does this method requires unlocked bootloader? Thanks
hi. this method not working for me !
*phone is unlocked !
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Alin45 said:
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Click to expand...
Click to collapse
reboot with bootloop and again. and just miui 12 a11 or rom with selinux permissive working for flash.
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
did you try to flash firmware file from twrp recovery first? also that error means that a checkpoint failed which you need to disable or remove in configuration settings.
tourofeio said:
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
Click to expand...
Click to collapse
did you tried recovery or fastboot flashing? and did you installed firmware first before installing full rom?
endva3 said:
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
Click to expand...
Click to collapse
i only tried recovery method and it works fine after days of trying. 12.0.6 android 11 is still buggy and miui needs to fix it a lot. most of apps are not well optimized for this flavor.
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Steelrock said:
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Click to expand...
Click to collapse
i did the same, but looking to partitions of system, product and vendor, i understand that flashing the files via recovery and fastboot they dont write in that partitions.
looks like the partitions are read only. thanks
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
tourofeio said:
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
Click to expand...
Click to collapse
Most probable, u forgot to do a Format data (yes) before reboot to system.
endva3 said:
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
Click to expand...
Click to collapse
Did you flash it from the built-in recovery or with MiFlash? (My 167 hour waiting period ends tomorrow)
Solved people. change the version of the Mi Flash.