Redmi 5 Plus Fake Global Rom Random Hardbricked - Xiaomi Redmi Note 5 / 5 Plus Questions & Answers

Guys, I recently bought a redmi 5 plus that installed with miui 9.2.0.2.
It can randomly bricked after a few days use.
When it bricked, I cannot boot into recovery mode nor power up the device, the led light keep blinking when charging and nothing will ever show up on the screen no matter what I press.
All I do is take it to service centre and they will open up the device back cover and boot it, but they will never tell me what they did.
Now the third time I go to service centre, they accused me for unauthorised opening the back cover due to scratch at the side of the screen, so the warranty is void.
Please help me get out of this nightmare, I want to know if I flash global dev rom to it, the problem will be solved?
If yes, how do I do it? Is it possible to flash with the updater? Or only testpoint method? (Note: this device is installed fake vendor rom)

Teddy Thomas said:
Guys, I recently bought a redmi 5 plus that installed with miui 9.2.0.2.
It can randomly bricked after a few days use.
When it bricked, I cannot boot into recovery mode nor power up the device, the led light keep blinking when charging and nothing will ever show up on the screen no matter what I press.
All I do is take it to service centre and they will open up the device back cover and boot it, but they will never tell me what they did.
Now the third time I go to service centre, they accused me for unauthorised opening the back cover due to scratch at the side of the screen, so the warranty is void.
Please help me get out of this nightmare, I want to know if I flash global dev rom to it, the problem will be solved?
If yes, how do I do it? Is it possible to flash with the updater? Or only testpoint method? (Note: this device is installed fake vendor rom)
Click to expand...
Click to collapse
if your device is completely bricked then you have to do test point method. It is not very hard, and it will make your phone work again, flash chinese beta rom and unlock bootloader if you want then.

n0_xQuZe said:
if your device is completely bricked then you have to do test point method. It is not very hard, and it will make your phone work again, flash chinese beta rom and unlock bootloader if you want then.
Click to expand...
Click to collapse
Can I flash global development rom directly from a fake rom? From what I read in other thread, Chinese development rom will come out with error 86006

Personally i have a MEE7 version phone, you can check yours in the phone box. I had a fake rom and couldnt update or flash anything. So i did test point, flashed chinese developer rom and succesfully bind my account without any error whatsoever and no need for any vpn at all. So now i am only waiting for 15 days to go by and i can unlock.

n0_xQuZe said:
Personally i have a MEE7 version phone, you can check yours in the phone box. I had a fake rom and couldnt update or flash anything. So i did test point, flashed chinese developer rom and succesfully bind my account without any error whatsoever and no need for any vpn at all. So now i am only waiting for 15 days to go by and i can unlock.
Click to expand...
Click to collapse
I have the MET7 and did the test point method all flashed ok i too am now waiting the 15 days to unlock. also account binding worked first time.

No you cannot flash global rom over fake rom - it will brick the phone - tried and tested.
test point method to chinese developer rom, unlock bootloader and then flash global rom.

Related

need lyf water 7 stock rom

i am using a lyf water 7 LS-5504 android phone and recently tried to root my device and succeeded. but a week after rooting my phone unexpectedly does not boot anymore. when i press the power button i can see the boot screen but its stuck there.i can boot the phone in recovery mode (or fastboot or what ever mode you would like to call it) and i have already tried factory reset, partition cache wipe, hard reset and what not. i'm guessing the only way left is to flash a rom but i did not take a backup of the stock rom and i cannot find a rom for my device anywhere online. not even the stock firmware is available. i would really appreciate it if someone can help me find a rom for my phone so i can revive my phone because its the only one i have and i have not been able to use it since 2 days and i cannot take it to an official store since i unlocked my bootloader even if i did the store is closed in my city for 3 more days. i really cannot manage without a phone for that long.
<SHORT VERSION>
- LYF Water 7 phone. model no. LS-5504
- its soft bricked
- i need a rom to fix it
- i cannot find a rom for my phone's model anywhere in www(online)
- stock rom if possible but anything that works is cool
-asap or my life and my job will face a disaster.
Can u please tell me how do u root your lyf ls 5504
---------- Post added at 05:00 PM ---------- Previous post was at 04:57 PM ----------
U just go to recovery mode then try to clear the cache partition for 4 to 5 times then hard reset your phone and it will start working.
aadhityachaos said:
i am using a lyf water 7 LS-5504 android phone and recently tried to root my device and succeeded. but a week after rooting my phone unexpectedly does not boot anymore. when i press the power button i can see the boot screen but its stuck there.i can boot the phone in recovery mode (or fastboot or what ever mode you would like to call it) and i have already tried factory reset, partition cache wipe, hard reset and what not. i'm guessing the only way left is to flash a rom but i did not take a backup of the stock rom and i cannot find a rom for my device anywhere online. not even the stock firmware is available. i would really appreciate it if someone can help me find a rom for my phone so i can revive my phone because its the only one i have and i have not been able to use it since 2 days and i cannot take it to an official store since i unlocked my bootloader even if i did the store is closed in my city for 3 more days. i really cannot manage without a phone for that long.
<SHORT VERSION>
- LYF Water 7 phone. model no. LS-5504
- its soft bricked
- i need a rom to fix it
- i cannot find a rom for my phone's model anywhere in www(online)
- stock rom if possible but anything that works is cool
-asap or my life and my job will face a disaster.
Click to expand...
Click to collapse
Buddy wait for two days i just brought the device today i m rooted and will give you a fastboot flashable firmware system.img file OK Then maybe you may boot up and do ur tasks
*********************DO HIT THANKS IF I HELPED*******************
(i am using a lyf water 7 LS-5504 android phone and recently tried to root my device and succeeded. but a week after rooting my phone unexpectedly does not boot anymore. when i press the power button i can see the boot screen but its stuck there.i can boot the phone in recovery mode (or fastboot or what ever mode you would like to call it) and i have already tried factory reset, partition cache wipe, hard reset and what not. i'm guessing the only way left is to flash a rom but i did not take a backup of the stock rom and i cannot find a rom for my device anywhere online. not even the stock firmware is available. i would really appreciate it if someone can help me find a rom for my phone so i can revive my phone because its the only one i have and i have not been able to use it since 2 days and i cannot take it to an official store since i unlocked my bootloader even if i did the store is closed in my city for 3 more days. i really cannot manage without a phone for that long.
<SHORT VERSION>
- LYF Water 7 phone. model no. LS-5504
- its soft bricked
- i need a rom to fix it
- i cannot find a rom for my phone's model anywhere in www(online)
- stock rom if possible but anything that works is cool
-asap or my life and my job will face a disaster.)
i'm going through sane problem now... phone is stucked on 'powered by android' nothing else is happening..
vinay_narang said:
(i am using a lyf water 7 LS-5504 android phone and recently tried to root my device and succeeded. but a week after rooting my phone unexpectedly does not boot anymore. when i press the power button i can see the boot screen but its stuck there.i can boot the phone in recovery mode (or fastboot or what ever mode you would like to call it) and i have already tried factory reset, partition cache wipe, hard reset and what not. i'm guessing the only way left is to flash a rom but i did not take a backup of the stock rom and i cannot find a rom for my device anywhere online. not even the stock firmware is available. i would really appreciate it if someone can help me find a rom for my phone so i can revive my phone because its the only one i have and i have not been able to use it since 2 days and i cannot take it to an official store since i unlocked my bootloader even if i did the store is closed in my city for 3 more days. i really cannot manage without a phone for that long.
<SHORT VERSION>
- LYF Water 7 phone. model no. LS-5504
- its soft bricked
- i need a rom to fix it
- i cannot find a rom for my phone's model anywhere in www(online)
- stock rom if possible but anything that works is cool
-asap or my life and my job will face a disaster.)
i'm going through sane problem now... phone is stucked on 'powered by android' nothing else is happening..
Click to expand...
Click to collapse
Buddy Check Water-7 Forums on XDA or Check posts from my profile there's whole basic Development for Water-7 u will find root stock rom custom recovery and rom there

RN3 Kenzo - replacing motherboard to unbrick

Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Use test point mathod it will be back in life easily. Tested myself
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
can you boot to fastboot if yes then flash via fast boot or search for FASTBOOT TO EDL MODE IN guide news section and flash via EDL that might help
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Buy a deepflash cable for 5$ in Aliexpress.
Deep flash https://www.youtube.com/watch?v=uXai6PMmM7s
How to make deep flash cable https://www.youtube.com/watch?v=hmdrj4uX7gY
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
If you're unable to boot to fastboot and edl or the pc shows 9008E, get the deep flash cable from Alixpress. It's cheap and easiest way to recover your phone. This cable works fine.
https://www.aliexpress.com/item/New...rts-all-BL-locks-Engineering/32785943419.html
Or you can make the cable yourself with some Youtube tutorials posted above.
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached​ picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached​ picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Wait a bit more and if nothing happens try rebooting to fastboot.
If fastboot is accessible try flashing the latest dev rom.
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached​ picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Did you flash all partition including storage? If I remember correctly, this shouldn't take more than 10-15 mins to boot up or even less. If it's still stuck, you should select 'flash all including storage' in Mi flash.
Or
Since your phone can boot into fastboot now, I would suggest to unlock it unofficially and flash zcx twrp recovery and than flash the rom through recovery after formatting all data.
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
Just get a permission from xiaome and unlock your device and then flash custom recovery change the rom(sorry for bad english)
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
You lost your IMEI and Modem. Try this -> https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Does the "Radio: OFF" status mean it's being kept forcibly off by the system. i looked for an option to turn it on with no success...
aizen_souske said:
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Click to expand...
Click to collapse
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Yogendra Kher said:
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Click to expand...
Click to collapse
50% error is prety common..bothibg to do with your device..thabkfully i never had such issues..but u can find plenty of youtube videos adressing this issue
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
ebrehemx said:
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Click to expand...
Click to collapse
U did somethibg wrong..u have to use imei fixer and input your own imei given at the back of box..dont.input some random imei..imei spoofing is illegal
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
apriores said:
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
Click to expand...
Click to collapse
No

Poco F1 bricked

Hi there,
So i had a nice time with my poco, but now it's bricked and i need your help.
So is here anyone who can restore the phone using EDL Mode that it's usable ? Maybe someone knows a service who make these work remotely ? Because in Germany there's no service center from XIAOMI.
Heiko77 said:
Hi there,
So i had a nice time with my poco, but now it's bricked and i need your help.
So is here anyone who can restore the phone using EDL Mode that it's usable ? Maybe someone knows a service who make these work remotely ? Because in Germany there's no service center from XIAOMI.
Click to expand...
Click to collapse
You flashed arter leaks kernel ?
OmarKiller60 said:
You flashed arter leaks kernel ?
Click to expand...
Click to collapse
If he would flash arter leaked kernel which wiped ufs storage including bootloader, he may not even have oportunity to boot to EDL mode as its part of bootloader
Redmi note 8 pro bricked edl
Is there a way to bypass an approved account for Xiaomi through edl mode bricked I have a redmi note 8 pro phone who died two months ago and did not live are there any developers who report ??????
OmarKiller60 said:
You flashed arter leaks kernel ?
Click to expand...
Click to collapse
I flashed this kernal and now phone is bricked and I won't even enter into twrp mode just totally dead. I go to service center and that guy who has not much knowledge regarding this said I flash the official rom through fastboot mode and through edl mode but still its stuck on logo then he said there's one more shop near to service center that guy can help you into this I go that guy into his shop I told him I flashed the wrong kernal and its not even responding in anyway he understands what I mean to say he said he has to open the phone to revive but still he said there are 60% chance of success. I am so worried now can anybody please help me into this
hey all i have also flashed the kernel also an now my phone is bricked aswell i can only get edl to be recognized on my pc ive also tried flashing factory rom with mi flash tool and get the authentication error does anyone have a work around to this issue thanks
You got what you deserved, period. Don't flash every **** that someone is giving you.
And no, there is no workaround. Your phone is dead, go get a new one.
Lazy Rich said:
You got what you deserved, period. Don't flash every **** that someone is giving you.
And no, there is no workaround. Your phone is dead, go get a new one.
Click to expand...
Click to collapse
Nah, bull****. He just need authorized EDL account to flash stock firmware with miflash
EugenStanis said:
Nah, bull****. He just need authorized EDL account to flash stock firmware with miflash
Click to expand...
Click to collapse
Have fun finding someone that doesn't charge you an immense amount of money for that. Yeah, paying 100$ to some trustworthy ukrainian guy is probably better than buying a new phone.
I hope that these guys learned their lesson to not randomly flash any "fancy" things to their phone. Always look for trusted sources.
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Lazy Rich said:
Have fun finding someone that doesn't charge you an immense amount of money for that. Yeah, paying 100$ to some trustworthy ukrainian guy is probably better than buying a new phone.
I hope that these guys learned their lesson to not randomly flash any "fancy" things to their phone. Always look for trusted sources.
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Click to expand...
Click to collapse
Nah, the cost of EDL account is about ten dollars. Its still much more better to pay 10 buck rather then spending 400 dollars on new or used phone
Lazy Rich said:
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Click to expand...
Click to collapse
Yeah, luckily not everyone does it, otherwise you would have certain problems.
Just check source and if you completely paranoid build the ROM by your self...
So, yes. I did flash leaked arter. Needed EDL flash and phone was alive. Problem that now exists is,I get no network connection. Also had to restore IMEI and so on. Maybe somebody got a solution to bring back at least second Sim to life with mobile connection.
i thought the same where thinking the phone is back i had wlan working but then i played arround with imei to get it back in phone now its completey ****ed no wlan no sim :laugh::laugh::laugh:
---------- Post added at 21:06 ---------- Previous post was at 21:01 ----------
i also try to flash the leaked kernel to fully brick the phone but its not bricking my phone lol dunno how to get it bricked to start from begin xD
U need just wipe partitions and flash persist.img to get WLAN back
its not working write protected its not even working with modified fastboot flash_all.bat in edl mode .....
i also tryed with orginal .qcn file from friends phone i only replaced the imeis not even working
edit: i worked 3 days on it nothing is working i gave it up buying a new phone and stop waisting my time on this ****
I can help you to do edl flash in just 800 rupees call me 7351071470

My MiA3 is Dead, Please help me!!

Brothers, I was using stock ROM of Android 10 and fed up with the bugs and overheating issues so I decided to install customer ROM for a while. I followed the steps to install TWRP and my phone stuck in FASTBOOT mode. Mistakenly I did those steps in both the slots so my phone was not booting from neither slots. The time tried to flash TWRP I had my bootloader unlocked and USB Debbing enabled. In doing R&D I locked my bootloader again and was not able to unlock it as it was always showing me an error "remote unlocking not allowed". Now after 15 days my phone has not have enough battery to power on all it shows after pressing power button for 10 seconds is blinking notification light. When I try to charge it notification light keeps on blinking and nothing happens. In my country and state everything is shut down due to covid-19 and there is no hope for the service centers to open until 25 days. Is there anyone who can help me in getting my phone fixed as I can't buy new phone due to shut down neither I can service my device.
PS: I am not very much into mobile development and kind of nood.. Please help me!
iankitverma said:
Brothers, I was using stock ROM of Android 10 and fed up with the bugs and overheating issues so I decided to install customer ROM for a while. I followed the steps to install TWRP and my phone stuck in FASTBOOT mode. Mistakenly I did those steps in both the slots so my phone was not booting from neither slots. The time tried to flash TWRP I had my bootloader unlocked and USB Debbing enabled. In doing R&D I locked my bootloader again and was not able to unlock it as it was always showing me an error "remote unlocking not allowed". Now after 15 days my phone has not have enough battery to power on all it shows after pressing power button for 10 seconds is blinking notification light. When I try to charge it notification light keeps on blinking and nothing happens. In my country and state everything is shut down due to covid-19 and there is no hope for the service centers to open until 25 days. Is there anyone who can help me in getting my phone fixed as I can't buy new phone due to shut down neither I can service my device.
PS: I am not very much into mobile development and kind of nood.. Please help me!
Click to expand...
Click to collapse
With locked bootloader, you need a service center with an authorized mi account. Find some online service, they will guide you and connect remotely to your PC to reflash the ROM.
_mysiak_ said:
With locked bootloader, you need a service center with an authorized mi account. Find some online service, they will guide you and connect remotely to your PC to reflash the ROM.
Click to expand...
Click to collapse
And where can I find that guy who can do all this.. I am ready to pay him as well.
iankitverma said:
And where can I find that guy who can do all this.. I am ready to pay him as well.
Click to expand...
Click to collapse
You can't promote paid services on xda so you will have to search yourself
iankitverma said:
And where can I find that guy who can do all this.. I am ready to pay him as well.
Click to expand...
Click to collapse
Search for "xiaomi edl unbrick" on Google, at least 3 services are being mentioned on different forums. I have no personal experience with any of them, so you'll need to do your own research.

Android 11 V12.0.3.0.QFQEUXM - Touch not working

Hi,
Did anyone experience some issue in the OTA upgrade to V12.0.3.0.QFQEUXM?
Now, at the first reboot after the upgrade, my touch doesn't work anymore and to unlock I used an external mouse.
I thought the V12.0.3.0.QFQEUXM was one of the "safe" roms without the bricking bug... But still, the touch not working isn't exactly good
Did you overcome this issue?
Thanks
I bricked my Mi A# trying to go back to a earier rom. Please just wait for an OTA to fix this, since you have a OTG to use mouse, youll be able to install it from the phone itself. Good luck
Bysholo said:
I bricked my Mi A# trying to go back to a earier rom. Please just wait for an OTA to fix this, since you have a OTG to use mouse, youll be able to install it from the phone itself. Good luck
Click to expand...
Click to collapse
i have the same case, do u mean that if xiaomi launch new fixed update rom/loader of android 11 we can install/load it from flashdisk using OTG cable?
I am facing the same issue. The touchscreen doesn't work anymore. Please help!
I brought the phone to Xiaomi repair centre and... They're scamming me!
They don't give me back the phone if I don't pay 20€ or if I don't pay 80€ to repair the back camera glass that has a small crack (for 6 months). They don't either check the issue if before I don't pay WTF!!!
And, official Xiaomi support via email agrees that, before checking the phone, I have to repair at my expense any scratch!!! And that they don't know about any issue on the Mi A3 FW!!! As if the dozens of wrong firmware of the latest year never existed!!! I'm speechless!!!
kerahledrek said:
i have the same case, do u mean that if xiaomi launch new fixed update rom/loader of android 11 we can install/load it from flashdisk using OTG cable?
Click to expand...
Click to collapse
Sorry I couldn't respond earlier. No, I meant that you can use the mouse to get to the Options menu and install the OTA update directly from the phone.
Bysholo said:
Sorry I couldn't respond earlier. No, I meant that you can use the mouse to get to the Options menu and install the OTA update directly from the phone.
Click to expand...
Click to collapse
That' is the only hope!
P.S. Here in Italy Xiaomy doesn't repair your phone really for free! If you have some scratches on the back a small sign on the camera glass, etc... They pretend that you pay them to fix the visual glitches and then they will repair your phone for the s**t they did!
So, they release public statements that they will fix the issue, and then in reality they scam you...
mr-mauro said:
That' is the only hope!
P.S. Here in Italy Xiaomy doesn't repair your phone really for free! If you have some scratches on the back a small sign on the camera glass, etc... They pretend that you pay them to fix the visual glitches and then they will repair your phone for the s**t they did!
So, they release public statements that they will fix the issue, and then in reality they scam you...
Click to expand...
Click to collapse
Sorry to hear that. I have same problem, touch not working after update to A11, bricked after downgrade to 10. Then i bring to service center, they fix it for free, even with unlocked bootloader (I'm living in Vietnam).
Unfortunately, at least here in Italy, Xiaomi seems a very unprofessional company (to not say something worst)!
They are not fixing it, they pretend money to before repair and replace unrequested component that have scratches, before even trying to fix the s*it they did.
For my point of view, I wouldn't anymore suggest to anyone to buy them. Because, if then this is the service you get, you save more money with any other brand that has a professional after sale support.
I got back my phone, I had to pay for it because they weren't fixing it for free, despite it was a problem caused by them (that's a joke Xiaomi)!
However, I received a new fw and with a mouse connected via OTA I installed it and, now touch works... But still, WTF Xiaomi, you create a global issue and then you spill money from clients? I got rid of the phone now and my next phone this year won't be a Xiaomi
same issue here, won't buy Xiaomi smartphone next time for sure.
I have a question: if a rom is buggy, is buggy FOR ALL USERS. But if some user (like me) don't have any bug... Problably is not a xiaomi issue. It's a user issue that don't have the skills to apply an ota update without mistakes. For example first a11 killer ota bricked all phones. But 12.0.3.0 that i have installed two months ago...have touchscreen working perfectly. So Good luck with yours futures Samsung... But if you don't be able to update a phone, don't incolpe xiaomi.
Anyway... Digit this * # * # 64663 # * #* and make the specific test...
hello, i recieved the march 21 OTA update yesterday, and after the final reboot, my touchscreen doesn't work anymore,
did you find a solution? i don't have a usb-c adapter so i can't try with a usb-mouse.
thanks
arjo656 said:
hello, i recieved the march 21 OTA update yesterday, and after the final reboot, my touchscreen doesn't work anymore,
did you find a solution? i don't have a usb-c adapter so i can't try with a usb-mouse.
thanks
Click to expand...
Click to collapse
First try an hard reset. Or better a clean firmware installation. But before try a touchscreen test. If is a little software problemi, the test solve it with a sort of recalibration
wetito said:
First try an hard reset. Or better a clean firmware installation. But before try a touchscreen test. If is a little software problemi, the test solve it with a sort of recalibration
Click to expand...
Click to collapse
hello, how can i do those things if i can't unlock the phone? i can't enter my pin code or my unlock pattern
arjo656 said:
hello, how can i do those things if i can't unlock the phone? i can't enter my pin code or my unlock pattern
Click to expand...
Click to collapse
Mmmm.... I suggest you a clean system installation via fastboot or with miflash in edl mode
I'm afraid the new android security system will ask me for my unlock pattern during installation.
How to enter in the EDL mode?
hello, after almost 2 months i managed to solve my problem. because of this fuc.... covid, I could not cross the border to take my mobile phone to the after-sales service, so I ordered a usb adapter to be able to connect a keyboard and mouse, and suddenly I was able to skip the unlocking pattern and go to settings to check for available updates, and luckily for me there was one of 43mb! After installing this update, the touch screen works again !!
arjo656 said:
hello, after almost 2 months i managed to solve my problem. because of this fuc.... covid, I could not cross the border to take my mobile phone to the after-sales service, so I ordered a usb adapter to be able to connect a keyboard and mouse, and suddenly I was able to skip the unlocking pattern and go to settings to check for available updates, and luckily for me there was one of 43mb! After installing this update, the touch screen works again !!
Click to expand...
Click to collapse
2 mounths??? in ten minutes you could have done this: download miflash tool, download latest stock mia3 fastboot firmware (also ota incremental are online!) and flash it with miflash
wetito said:
2 mounths??? in ten minutes you could have done this: download miflash tool, download latest stock mia3 fastboot firmware (also ota incremental are online!) and flash it with miflash
Click to expand...
Click to collapse
how can i do my unlock pattern without the touchscreen and the phone connected to the computer?

Categories

Resources