Related
Hi All, since a lot of us are getting the shift now, i guess it's time to think about which screen protector you are going to use, personally i always enjoy the Martin Field Overlay Screen protector, but they don't seems to have one for the shift yet, what do you guys think? found any good screen protector you are going to use?
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
jarbi said:
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
Click to expand...
Click to collapse
yes, i am aware of that, it just i have been using HTC for more then 7 years now, past experience told me i better wait for better screen protector, because once you put it the HTC one, it's so difficult to remove it, and if you do try to remove it and swap it with something else, you leave a mark on the screen, some user even experience bend and uneven screen because the original one is just so sticky.
There don't seem to be many screen protectors specifically for the Shift yet, I'm sure there will be soon. I fitted the included one but not very well, I managed to get a couple of dust specks under it.
I've ordered some generic 7" protectors from Durasec http://www.durasec.com/catalog/index.php?language=en
I also ordered one of their liquid nanotech screen protector kits, don't know much about it but it appears to be a liquid which you spray onto the screen to form a seal. Should be interesting...
Is it neccessary?
Hi,
please, give me an answer to a stupid question?
Is it really necessary to apply a screen protector. Why don't the manufacturers do it in the first place.
What are the advantages, what the disadvantages. Okay, protection comes to mind as an advantage, but shouldn't the original screen be resilient enough?
I'd really like to here some informative opinions.
I have been using a HTC Vario II for some time now without any protection and I can't detect any scratches.
Settembrini
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
firedup said:
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
Click to expand...
Click to collapse
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Pantaloonie said:
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
Click to expand...
Click to collapse
mmm. sounds interesting!
I've got the original on but I have a scratch on the screen and wanted to remove it to see if its just the screen protector or the actual screen that is scratched. Have tried in vain to get at it to peel it off...
Just managed to get a corner - it came off no problem and thankfully the scratch isnt there! Just need a new protector now, my OCD is starting to kick in. Let me know how you get on with the Duratecs! Cheers
wu5262 said:
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Click to expand...
Click to collapse
sounds posh! I'll check it out, thanks
Screen Protector Ultraclear and a Anti Glare
http://shop.brando.com.hk/search.php?keyword=HTC+Shift&Submit=Product+Search
I have had this for my Athena and Brando also have two versions for the Shift.
Computersylvia
DO NOT by the Durasec. Got mine from Germany, welcome to bubble hell.
Just wish I knew where the original ones are from....
Anyone found any decent ones?
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Pantaloonie said:
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Click to expand...
Click to collapse
I'd leave it on if I were you - I only took mine off as it had a hair underneath and I was losing sleep over it. Took a while but once you get a hold of a little corner it lifts off no problem. I've emailed HTC to ask if they can send me another but I'm notn holding my breath.
Would stay away from the standard Duratec - waste of £8. Let me know if you try the liquid one though!
Hi -
Anyone used the liquid Duratec shield on the Shift yet?
Cheers - Dave
Duratec Crap
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Settembrini said:
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Click to expand...
Click to collapse
How did you remove the original screen protector without damaging the display? What is the problem with the Duratec screens?
Hi,
removal was difficult, but I did it. I don't know the exact English words. I used this sticky tape which you wrap up parcels with, tape is of a brownish colour. That I stuck onto the screen protector until it lifted in one corner.
Duratec is thin and cheap material and I guess it is not possible to get it on the screen without lots of bubbles.
Now I have ordered a protector from Brando, was that the name?
We will see.
S.
I really like the anti glare screen protector from www.pocketpctechs.com . I use it with my both my SMT5800 cellphone and my Motion Tablet PC. I'm hoping I can get one sized for the Shift. But my Shift is not here yet so I don't know the size. I can't even tell I have a screen protector with this brand.
screen protector abuse
Hi,
any news about the "best" protector.
In the meantime I have abused 4 or 5. Duratec's cheap ones aren't of any other use than to clean the screen from dust particles.
I tried the Brando "ultra clear" was that the name? Relativ easy to apply, but in the end I fiddled with it too long. Had to peel it off.
Next I tried Brando "plus". Easily to apply, but foil slipped underneath the edge of the screen, when lifting it up to clean off a piece of fluff the protectors edge was damaged.
But the last one is really easy to apply. But, but, they or the distributers just declared them to be for the Shift, originally they are for the eee, how many eeeees were there?
So the screen protector doesn't really fit. At the edges there the foil doesn't cover about 1 or 2 millimeters of the Shift's screen.
Maybe somtime soon they will sell a protector that is for the Shift.
Please, if anyone has got the ultimate protector mention it here:
perfect fit and easily to apply would be nice features.
S.
Today I received a screen protector in the mail (came free with a case), so I decided to change out the old one that came pre installed on the X10. Of course once everything was removed and when I started to apply the new one, all of the dust in the house was magically attracted to the new one, rendering it useless.
I'm now stuck without a screen protector, and have growing paranoia that my screen is going to get messed up. Looks like I'll have to order a new one.
Until then, does anyone have an X10 with the protector removed? Has your screen scratched after extended normal use?
I'll probably be stuck without one for a week so I hope it lasts.
Truth : I suspect you won't have much success, if any, finding someone who's successfully scratched their X10 screen. There is one user however, who's succeeded in cracking the screen -- I remember having read a thread about it
javagreen said:
Truth : I suspect you won't have much success, if any, finding someone who's successfully scratched their X10 screen. There is one user however, who's succeeded in cracking the screen -- I remember having read a thread about it
Click to expand...
Click to collapse
i hav x10i... my screen has scratches like 7-8.. theyre like minor scratches bt still
:'(
javagreen said:
Truth : I suspect you won't have much success, if any, finding someone who's successfully scratched their X10 screen.
Click to expand...
Click to collapse
Well you've got at least two now, momerbk and gavriel18 on another thread has stated his is "mashed" now due to not having one, so I'd get one on asap.
Not forgetting the guy who's was run over, that was pretty scratched
I've gotten some minor scratches but they are very hard to see... and from my personal tests the X10 screen hides scratches better then the Dell Streak
tigger69 said:
Not forgetting the guy who's was run over, that was pretty scratched
Click to expand...
Click to collapse
Rofl, I saw that one as well, although it doesn't really fit into my "normal use" category
I'm pretty careful with my stuff, I'll just have to avoid buses until I get a new screen protector lol.
This thread is somewhat putting me at ease though!
Semi related: Are there any scratch test videos for the X10?
Multiple scratches and a chip. Still don't know how I managed that...
haha lol. I scratched mine within 3 weeks ... I have now one big scratch and a few little scratches blegh.
Are you guys sure you really scratched the glass or is it just the original screen protector? The original screen protector scratches very easily. That is why I removed mine and replaced it with something better.
mine is still mint, I work in bean processing plant(dusty), spend most of my days off at the beach with the kids. That's no proof that it won't get scratched one day but I doubt it will make people think less of me if i have a scratch on my screen
naplesbill said:
Are you guys sure you really scratched the glass or is it just the original screen protector? The original screen protector scratches very easily. That is why I removed mine and replaced it with something better.
Click to expand...
Click to collapse
Lol, I never had a stock screen protector with mine
T-Mobile UK
Z3X said:
Lol, I never had a stock screen protector with mine
T-Mobile UK
Click to expand...
Click to collapse
I'm pretty sure they all have them stock. Take a closer look at the lower part of the screen near the buttons. You should be able to see it there. it is an exact fit protector so it's almost impossible to see that it's there.
naplesbill said:
I'm pretty sure they all have them stock. Take a closer look at the lower part of the screen near the buttons. You should be able to see it there. it is an exact fit protector so it's almost impossible to see that it's there.
Click to expand...
Click to collapse
Hmm it does look that way, although I can't seem to get it if it's is one) off
Another quick question:
I've heard that some of the better screen protectors can actually hide previous scratches once they are applied, is that actually true?
I've ordered both the clear coat screen protector and also that free stealthguard protection thing, so I'm hoping that one of those will be sufficient
Z3X said:
Hmm it does look that way, although I can't seem to get it if it's is one) off
Click to expand...
Click to collapse
I put one of the free stealthguards on mine Saturday. I only used he screen guard not the full body though. It was a little difficult to get the oem screen protector off but only until you get it started. Once it starts peeling it comes off fairly easy.
i have my phone in a leather case without a screen protecter, never been a fan of them and my screen is immaculate... so far it is only almost 3 weeks old though
naplesbill said:
I put one of the free stealthguards on mine Saturday. I only used he screen guard not the full body though. It was a little difficult to get the oem screen protector off but only until you get it started. Once it starts peeling it comes off fairly easy.
Click to expand...
Click to collapse
wow just found it, i never noticed it LOL, it's a thick screen protector, sometimes when texting i noticed the phone sometimes missed keys wonder if it was because of the protector.
so can anyone confirm that there phone has been scratched without the OEM protector?
I think that extra thick shield is supposed to act as a "shatter resistant protector" so that if you do happen to smash the glass you don't get shards and splinters everywhere. It is much thicker than any screen protector i've seen before and taking it off will ruin it.
I took my oem one off and now have a deep scratch , not a clue how I did it. If I could go back I would definitely use protection lol. They may not be as pretty as the bare screen but they work.
Hello all. I have been waiting for SGP to make the crystal screen protector for the prime. While browsing for accessories I came across this promising prospect. This screen protector is not made by SGP but it way be worth your consideration. This brand is advertised as Armor Suit. I am going to order mines now and will provide and update on its use.
Jason
http://www.amazon.com/gp/product/B006TOPR72/ref=ox_ya_os_product
Instruction Video >>> http://www.youtube.com/watch?v=GFHy6o_VRwI
Link to activate lifetime warranty >>> http://www.armorsuit.com/warranty/
Update 2-11-2012
I received mine yesterday at work. As soon as I got home I opened the package and applied the new screen protector. The instructions recommend keeping the tablet off for about 24 hours after application before use. I did miss one part of the instructions which says to wet both sides of the screen protector. Make sure you do this because it will help you remove the liquid and bubble better with the rubber card. It has been over 12 hours since the application and it is curing nicely. I still have about 10 tiny wet bubbles that I am hoping will dry out before I say that it is perfect. One thing I did notice when I removed by prime from its folio case is that I had a tiny scratch a quarter of an inch up above the Asus logo. I was very upset about that because I handle my tablet like a baby, unless somehow the scratch was caused my the inside material of the case. Anyways, the good thing about this screen protector is that now you can no longer see the scratch. If this continues to cure like I hope it does, I will order another one for my girlfriends prime. Did I mention that wifi and GPS performance also improved after the application ??? Lol jk. The screen did lose a little of its smooth glide when swiping with your finger but that should improve over time. Touch response has been the same otherwise. I will provide an update in a couple of days once it has cured some more. If any of you reading this have purchased and installed the product, please provided your experience. I would like to know if the quality is consistent.
***Important***
Just an FYI to those who use the keyboard dock and are considering installing this screen applicator, removing the prime in and out of the keyboard dock is extremely tight and is marking up the screen protector film where the dock and screen meet. I am going to contact the manufacturer about this to see if they are aware of this issue...
jfranco328 said:
Hello all. I have been waiting for SGP to make the crystal screen protector for the prime. While browsing for accessories I came across this promising prospect. This screen protector is not made by SGP but it way be worth your consideration. This brand is advertised as Armor Suit. I am going to order mines now and will provide and update on its use.
Jason
http://www.amazon.com/gp/product/B006TOPR72/ref=ox_ya_os_product
Click to expand...
Click to collapse
looking forward to your update! only problem i have with their listing on amazon is that i says its non sticky, but also says its self healing... i sell screen protectors in a sprint store. from my experience, the self healing ones tend to be the orange peels and rubbery (sticky) kind. but if im wrong, please let me know! interested in this!
stretchwookie said:
looking forward to your update! only problem i have with their listing on amazon is that i says its non sticky, but also says its self healing... i sell screen protectors in a sprint store. from my experience, the self healing ones tend to be the orange peels and rubbery (sticky) kind. but if im wrong, please let me know! interested in this!
Click to expand...
Click to collapse
Will do, I received my order confirmation last night. Standard shipping so maybe sometime next week I will have it.
Lifetime warranty means you'll ruin 5 of them just trying to install them! This is why right now I'm not wearing a condom on my Prime. If I can't get the perfect screen protector on there perfectly then I just won't do it at all. I'm fairly careful with the front and I may eat my words one day.
Mine should be here today thanks to prime shipping I will give my feedback on this protector later this afternoon
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
msfguard said:
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
Click to expand...
Click to collapse
Sending a thanks your way for your update. Later this afternoon I still had a couple of bubbles that I was to impatient on waiting to see if they would dry out and disappear so I decided to apply some of the solution on top of the surface and opted to use a credit card to push out the remaining bubbles (I did not like using the included rubber applicator much.) One Important item that I did not realize until now is that getting the tablet to dock with this screen protector is really, really tight. This may be a deal breaker for some. I don't use the keyboard dock all the time but it looks like the constant swap will make the screen protector look a little beat up at the bottom...
msfguard said:
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
Click to expand...
Click to collapse
If it's clear and not matt, hows the anti fingerprint part of it working out?
Sent from my CM7 Atrix 4G
It seems to resist printing fairly well, I'd say it really only has showed them with hard swipes of the finger such as maybe playing fruit ninja for abit but just normal presses it rarely leaves one
jfranco328 said:
Hello all. I have been waiting for SGP to make the crystal screen protector for the prime. While browsing for accessories I came across this promising prospect. This screen protector is not made by SGP but it way be worth your consideration. This brand is advertised as Armor Suit. I am going to order mines now and will provide and update on its use.
Jason
http://www.amazon.com/gp/product/B006TOPR72/ref=ox_ya_os_product
Instruction Video >>> http://www.youtube.com/watch?v=GFHy6o_VRwI
Link to activate lifetime warranty >>> http://www.armorsuit.com/warranty/
Update 2-11-2012
I received mine yesterday at work. As soon as I got home I opened the package and applied the new screen protector. The instructions recommend keeping the tablet off for about 24 hours after application before use. I did miss one part of the instructions which says to wet both sides of the screen protector. Make sure you do this because it will help you remove the liquid and bubble better with the rubber card. It has been over 12 hours since the application and it is curing nicely. I still have about 10 tiny wet bubbles that I am hoping will dry out before I say that it is perfect. One thing I did notice when I removed by prime from its folio case is that I had a tiny scratch a quarter of an inch up above the Asus logo. I was very upset about that because I handle my tablet like a baby, unless somehow the scratch was caused my the inside material of the case. Anyways, the good thing about this screen protector is that now you can no longer see the scratch. If this continues to cure like I hope it does, I will order another one for my girlfriends prime. Did I mention that wifi and GPS performance also improved after the application ??? Lol jk. The screen did lose a little of its smooth glide when swiping with your finger but that should improve over time. Touch response has been the same otherwise. I will provide an update in a couple of days once it has cured some more. If any of you reading this have purchased and installed the product, please provided your experience. I would like to know if the quality is consistent.
***Important***
Just an FYI to those who use the keyboard dock and are considering installing this screen applicator, removing the prime in and out of the keyboard dock is extremely tight and is marking up the screen protector film where the dock and screen meet. I am going to contact the manufacturer about this to see if they are aware of this issue...
Click to expand...
Click to collapse
msfguard said:
Ok abit of an update, just installed the protector first impressions are this
Install was the best ive done in about 10 protector installs over the years, protector comes off the backing with very little pull, enough solution that i was able to wet my fingers twice and soak the adhisive side and front side well enough that it only took one attemt to postion the protector to the screen and boom it was done after a little squgiing with the rubbery card they give you, i had 3 tiny bubbles that came out easily then 2 slightly smaller bubbles along the top rim that im just gonna have to wait out till tomorrow
So so far im enjoying it, havnt noticed any imperfections, cut outs were extremely accurate now to just wait
Edit: The feels exactly like the screen if not a bit smoother at the moment not sure if this will remain but its pretty slick at the moment
Click to expand...
Click to collapse
both of you get thanks, but im going to skip this buy. we do wet installs at my sprint store, and 2 of the guys there have killed devices this way. i havent, but i dont want my first time to be MY prime, please dont mind my dumb rhyme
stretchwookie said:
both of you get thanks, but im going to skip this buy. we do wet installs at my sprint store, and 2 of the guys there have killed devices this way. i havent, but i dont want my first time to be MY prime, please dont mind my dumb rhyme
Click to expand...
Click to collapse
That's understandable. This is my first time using a wet screen protector. I wasn't concerned about damaging the prime because I have the accidental protection plan.
Do you have to pay for the replacements? I know most of these "lifetime replacement" types you have to pay $5-$10 just to get them to mail you a new one.
Bogus.
jfranco328 said:
That's understandable. This is my first time using a wet screen protector. I wasn't concerned about damaging the prime because I have the accidental protection plan.
Click to expand...
Click to collapse
aww thanks dood! i totally forgot about the protection plan! did you go through squaretrade?
back on topic: went with an Acase matte anti glare, dry install. took literally over an hour to get it perfect, but i did it. wish it woulda been easier, but im just too shy of the wet installs...
I'm looking for a top quailty anti-glare screen protector. I mainly want the anti-fingerprint part of it, but I like the matte screen look too. I had a Acase one on there, but the anti-fingerprint wasn't that great. I really wish Realook would come out with one for the Prime, b/c their's are awesome (have it on my phone). Realook (http://www.realook.us/dales_html/) has almost a textured feel to it, which is beyond awesome for keeping finger prints off. I have a email into them now to see if they plan on making one for the Prime.
I'm also thinking about NuSheild too:
http://www.nushield.com/dayvue_technology.php
Opinions, other options???
pileot said:
Do you have to pay for the replacements? I know most of these "lifetime replacement" types you have to pay $5-$10 just to get them to mail you a new one.
Bogus.
Click to expand...
Click to collapse
I don't think you need to pay for a replacement. I should have an answer to that question in the next couple of days if they respond to an email I sent to them early today...
Swiftks said:
I'm looking for a top quailty anti-glare screen protector. I mainly want the anti-fingerprint part of it, but I like the matte screen look too. I had a Acase one on there, but the anti-fingerprint wasn't that great. I really wish Realook would come out with one for the Prime, b/c their's are awesome (have it on my phone). Realook (http://www.realook.us/dales_html/) has almost a textured feel to it, which is beyond awesome for keeping finger prints off. I have a email into them now to see if they plan on making one for the Prime.
I'm also thinking about NuSheild too:
http://www.nushield.com/dayvue_technology.php
Opinions, other options???
Click to expand...
Click to collapse
I can tell you the armor suit does very well reducing finger prints. Your fingers glide smoothly across the screen. Now this is something I am going to try my best to describe, when typing ( I use thumb keyboard) you sort of get what feels like a slight rubber bounce with each press, I actually like that. Obviously its going to feel different then just typing on the glass but for me it works.
I had my xperia S for about 2 weeks, i really dislike how much glare that it gives off with the stock screen protector. So i already some anti-glare screen protector online.
problem: can't get it off.
I have been picking at this for 15 mins, can't get anywhere. It would come off.
does anyone tips on how i can remove this???
hkguy783 said:
I had my xperia S for about 2 weeks, i really dislike how much glare that it gives off with the stock screen protector. So i already some anti-glare screen protector online.
problem: can't get it off.
I have been picking at this for 15 mins, can't get anywhere. It would come off.
does anyone tips on how i can remove this???
Click to expand...
Click to collapse
Trust me, you have to destroy most of your fingernails..
Insist on one corner only, don't use sharp things such as knifes etc. you could scratch the screen.
reptile64 said:
Trust me, you have to destroy most of your fingernails..
Insist on one corner only, don't use sharp things such as knifes etc. you could scratch the screen.
Click to expand...
Click to collapse
would blow dryer make it easier?
When I removed mine from the arc I followed some advice and used a needle to pick at a corner. This did it straight away after many failed attempts with my nails. Just be careful you don't scratch the screen underneath but you should be fine.
However like I said in another thread I wouldn't recommend it, I think you should not see the factory applied screen protector as a screnn protector but rather part of the screen. It is applied perfectly and no matter how hard you try doing it yourself, you'll never manage to apply one as well...
Also on my arc I never actually notice that much difference in glare...
If you choose to stick a protector on it, I wrote this guild on the best way (imo) to apply a protector, enjoy!
http://forum.xda-developers.com/show....php?t=1652567
Anyone recommend a screen protector which actually has the pin hole at top and cover full screen.
As the ones about i see, don't even cover all the screen, leaving gaps at both top and bottom
Well, I found one absolutely perfect on amazon after reading numerous reviews on numerous screen protectors.
You get 3 in a pack, comes with usual wipes and also some glue for the edges, which really is not required at all.
Not a bubble anywhere, simply wiped with wet wipe and then dry, lined up camera dead centre and gently placed it,the screen did the rest and see the air bubble disappear, few more light presses to make sure and its bang on.
I am ocd and can say this tempered glass screen protector is absolutely spot on, covers all screen and hole for camera.
I also for first time ever did fingerprint on lock screen, didn't back up neither as i ain't letting samsung have my private info.
Took approx a minute to setup so you get full print, and on every single test approx 30 test now, it unlocked straightaway, soon as i touched screen.
https://www.amazon.co.uk/dp/B083P4D4HH/ref=cfb_at_prodpg
UPDATE:- the glue or liquid that comes with it, i decided to use also, as it got the better of me haha.
The edges there are a slight gap and I mean tiny, so have this liquid a go.
I poured it into a cap and used the little brush that comes in kit.
I did bottom first to test, brushed it on edge and it filled that gap.
Wipe with wet wipe and dry and pressed on glass to make sure it made contact and filled which it did.
I proceeded to do this on other 3 sides.
Dont worry about any going on the glass itself.
Simply use small sponge and soapy water to wipe of and then dry.
The glass can not be seen at all now, I forget I have one on, it is that good.
Wingchundub said:
Well, I found one absolutely perfect on amazon after reading numerous reviews on numerous screen protectors.
You get 3 in a pack, comes with usual wipes and also some glue for the edges, which really is not required at all.
Not a bubble anywhere, simply wiped with wet wipe and then dry, lined up camera dead centre and gently placed it,the screen did the rest and see the air bubble disappear, few more light presses to make sure and its bang on.
I am ocd and can say this tempered glass screen protector is absolutely spot on, covers all screen and hole for camera.
I also for first time ever did fingerprint on lock screen, didn't back up neither as i ain't letting samsung have my private info.
Took approx a minute to setup so you get full print, and on every single test approx 30 test now, it unlocked straightaway, soon as i touched screen.
https://www.amazon.co.uk/dp/B083P4D4HH/ref=cfb_at_prodpg
Click to expand...
Click to collapse
The protector looka good. Only sad thing is that, it's not available now.
wow and i thought this phone would be pretty popular with the price cut, turns out no one really use it huh?!
hhwong said:
wow and i thought this phone would be pretty popular with the price cut, turns out no one really use it huh?!
Click to expand...
Click to collapse
I don't get why people aren't buying this!!!
Maybe due to Pixel 4a?
Rishabh.XDA said:
I don't get why people aren't buying this!!!
Maybe due to Pixel 4a?
Click to expand...
Click to collapse
well on amazon it is CAD$500 tax included, pixel 4a is CAD$541 after tax, aside from the better camera processing on pixel which i personally dont care much, i dont see a reason why should i go for pixel instead of this amazing mid tier phone!
I really dig the large screen on here
Still love my A71
Really surprised that this phone is not more popular! The camera is good for being a mid-range phone and price is definitely fair.
Anyways I am using https://www.amazon.ca/dp/B0852YB79R?ref=ppx_pop_mob_ap_share
It's extremely clear, doesn't attract fingerprints, and comes with a fitment frame to make it really easy to get it applied perfectly.
Fingerprint sensor works perfectly as well.
@wolfy
Is there any amazon store link that can be shipped to Greece this temperred glass because from Canada one can't?
xalaros10 said:
@wolfy
Is there any amazon store link that can be shipped to Greece this temperred glass because from Canada one can't?
Click to expand...
Click to collapse
Sorry I will have to leave it for others to answer, but you can try a search for the same ASIN on the local Amazon site.