Related
Hello partners!!!
Here we share the functional rom last for our MaX2!
At the request of many colleagues, I created this CM13 based on 29 September.
And adding the entire S19 firmware to have it fully updated and upgraded.
Fully functional quick and steady myself I was surprised with the performance tests ... 143,000 AnTuTu with hot enough to test mobile Cold believe can draw record numbers ...
To say that I still have problems with slow motion ....
I'm starting to not know where mistakes can be ....
Libs I managed to trace the entire structure of the official EUI and still does not work ....
Permits revised from top to bottom ...
Libs mother and CM13 ... zilch ...
Perhaps there may be something in the kernel (boot) but there are limited ...
As I change anything to do directly test the ROM does not start or comes into infinite loops ....
So ... I leave the rom completely finished but with 2 bugs.
And each user knows what he wants or what you need.
But the ROM is fully functional for day to day and is really fast and stable.
BUGS:
1 Slowmotion nonfunctional. The rest of the camera is fully functional with 21mpxl.
2nd nonfunctional IRDA. (With this ... if not roms stocks moment ... little we can do ...)
The first!!!! IMPORTANT
We do not force anyone has use or install the rom.
We do not make yourself responsible for possible errors or brik the terminal.
We simply share our work for all so that we can have the terminal in our language.
RoM CM13
CM13 based official of the day 29/09/2016
s19 official firmware with all its libs + kernel.
Rom eliminated completely stock only apks that created conflict with our terminal.
Doze functional.
Sound perfect.
wiffi
BT
Integrated Pico gapps
Some improvements in the build.prop
Installation Method
We have created a zip FULL.
ROM contains firmware s19 + recovery + 5.8 everything necessary for you to come firmware do not have problems to come and stay all properly installed and running smoothly or silly scares.
* Download rom.
* Enter the zip rom on your terminal.
* Restart recovery.
* Since the recovery to the wipes.
* Once the wipes, select the zip and install.
* Once installation is complete, restart System.
* Wait for the rom you first start, it takes a few minutes not alarmed.
downloads TeaMSpaiN
CM13 ROM S19: https://mega.nz/#!SwIHSB7C!rFQJsQxx-J-RI121GWsaC6DAhDkLHzJdDPvdVabZRRY
Your comments on this rom.
And if you find any bug report to try to fix them.
Greetings comrades!
DONATE PAYPAL: https://www.paypal.me/ParasiteYgaseOso
thanks for sharing this
Sent from my Le X821 using XDA-Developers mobile app
Thank you! I will try this rom.
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
ArctiX said:
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
meangreenie said:
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
Click to expand...
Click to collapse
Thanks, that worked
Thanks for your work! Does Camera API 2 work this time?
I flashed this rom today. Everything works well for me!
wiped system and dirty flashed from previous cm13 and it seems to be running very well
Nice, smooth, we will see battery performance compared to Mokee.
- Camera2 api doesnt work
- Slowmotion doesnt work
- IR doesnt work
- For me, missing Aegis app from Mokee is a big step back
Sent from my Le X820 using Tapatalk
@ParasiTe_RemiX Did you build this from source or port from another device?
Beautiful ROM, but for me in Japan for some reason LTE is not working, I can get only HSPA. This is strange because in the stock eui I can use LTE no problem.
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
ArctiX said:
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
Click to expand...
Click to collapse
For the hardware buttons backlight, you can turn them off in settings/buttons or you can turn the brightness of them right down, via editing the max_brightness file.(can't remember the path name atm, but can easily google)
For the charging light, you can turn the charging light off in settings/display. The options for them don't seem to work unfortunately.
When I plugged my phone to the computer I noticed a blank file with no name and hard disk icon on my sd card, when I tried to delete it, it wiped my whole sd card! don't delete that file if you see it.
Hello, This ROM is also compatible with the version Le Max 2 Pro?
pickmod said:
Hello, This ROM is also compatible with the version Le Max 2 Pro?
Click to expand...
Click to collapse
No, you can't flash it for X620!
bahuy2003 said:
No, you can't flash it for X620!
Click to expand...
Click to collapse
I have Le Max 2 Pro X820... it is compatible?
Thank you, looks really production quality
This is extremely close to what I wanted from this device: Straighforward CM13 (ok, I'll want CM14 next), no bloat, functional and fast.
Also rooted, which means I control my device, not some vendor who wanted my money but fails to cede the control over what he sold.
And most importantly: No longer any of these Chinese apps, which refused to get uninstalled while they claimed about any privilege Android can provide.
I sure hope security patches will be coming for years as the device looks powerful enough to last a long time.
Only bug I've found so far is apps like Hangouts and Duo can't access the Camera for video calls. Apart from that, flawless so far.
Since I've been getting requests lately due to Google's updated Google Drive policy - here's the updated share link for the M4 Aqua kernels:
M4-Aqua_Kernels - Google Drive
drive.google.com
Nautilus Kernel for Xperia M4 Aqua
Disclaimer:
By flashing this kernel you acknowledge that the developer is NOT liable for any loss of data, does NOT guarantee any fitness of functionality or non-harm to your phone. You are advised to backup the kernel and ROM before flashing any release which will overwrite the existing wlan module and will lead to broken WiFi when switching to e.g. Destiny kernel
Notes:
(thanks to dani020110 for idea of the thread/post structure and the kernel update script)
[*]THIS WILL WORK ONLY ON UNLOCKED BOOTLOADERS
26.3.A.1.33 Marshmallow only
Features:
reduction of external kernel modules for less attack surface and better stability and protection
lots of power-saving improvements/reductions in idle
separate built WiFi module
reduction of wakelock of WiFi driver
ARP spoofing protection
fuse-fixes
in-built exfat driver (allows file-sizes on microSD of 2+ GB, better stability)
mm: stability improvements
several speedups in the core of the kernel
writeback speedups / improvements
attempts to pass SafetyNet
zram with lz4 + z3fold allocator (NO internal memory fragmentation !) [Port from Xperia Z5]
battery reduction in usage of Google Chrome & Chrome-based browsers (webkit / webview ?)
in-built core_ctl driver (better reliability and stability)
several improvements to the sound driver
and other changes too small to mention separately
optimized kernel config to speed up booting and slim down bloat
4.9 Linaro Toolchain
optimized flags to allow further optimizations and better stability
Installation
M4 Aqua - Booting into fastboot mode
Getting into Fastboot - From the system (Android):
adb reboot bootloader
Getting into Fastboot - Alternatively (while the phone is off):
Shutdown down the phone (power it off):
Connect the USB cable to your phone (your phone only !)
Press the Volume DOWN button, keep it pressed ...
Connect the other end of the USB cable to your PC/Mac, etc. and release the Volume DOWN button
That should get you into fastboot mode (led is blue)
Additionally you can check from your PC/Mac/Linux system if the device is there: fastboot devices
Finally - Flashing the Kernel (from Fastboot)
(WiFi might NOT work ! - thus flashing from TWRP/recovery is most times better (copying updated WiFi module))
fastboot flash boot boot.img
fastboot reboot
Flashing the Kernel via TWRP/Recovery
Booting into TWRP
Press the Volume DOWN button, keep it pressed
While pressing the Volume DOWN button also press the Power Button
As soon as the screen turns on and you see the Sony logo ("splash"), release the Power Button - now ONLY keeping the Volume DOWN button pressed
When you see the TWRP Logo ("splash" / screen), release the Volume DOWN button
Once you are IN TWRP, the select the folder where the Kernel zip-file was copied to and flash ("install") it
(you must have flashed TWRP via fastboot flash recovery TWRP.img before to boot into recovery !)
Download:
https://drive.google.com/open?id=0BykGGWB96CBQUFhXbG5sRUZMMWM
Thanks, acknowledgments:
dani020110
AndyPhoenix9879
and all the other kernel devs on XDA
XDA:DevDB Information
Nautilus-Kernel for Xperia M4 Aqua, Kernel for the Sony Xperia M4 Aqua
Contributors
zacharias.maladroit, dani020110, AndyPhoenix9879
Source Code: https://github.com/zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2/commits/Nautilus_I.1
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-30
Last Updated 2017-08-30
Reserved
Reserved
The kernel currently is at a pretty early stage,
so bear with me - it's totally not where I want it to be (FauxSound, memory management improvements, even more battery/idle reductions, smoother operation, etc.)
but lack of time and focus on Xperia Z5* devices doesn't allow me to focus on it right now ...
First of all, thank you so much for diving into the development of this device. I was eager to get something like this from you and I honored to have it now and here.
At first, the kernel seems stable. There was quite a big lag at the first start up and it took a while for the WiFi to turn on but it's fine. I can't see any hotplug included in the kernel and SuperSU binaries are outdated. It seems like there isn't also undervolt and underclock included. The GPU idles at 400MHz which isn't quite power efficient. Overall it's good for a start. I also have a question which is for the touchscreen drivers for this phone. No matter the kernel, stock or custom, there are problems with the random shutting down of the touchscreen or going nuts (scrolling and pressing by itself randomly). I'm looking that the logs and it seems like that the cyttsp5 driver isn't functioning properly on the E2303 variant. I've attached dmesg and klog so you can take a look at it. Also, I'm not the only one with this problem, there are much more users in Q&A and on random forums and YouTube.
dmseg
log
How can i backup current all of there (kernel, wlan,...)? before flash it
windows112009 said:
How can i backup current all of there (kernel, wlan,...)? before flash it
Click to expand...
Click to collapse
Backup your boot and system using twrp!
dani020110 said:
Backup your boot and system using twrp!
Click to expand...
Click to collapse
Can i use this for E2312 phone?
So thanks!
windows112009 said:
Can i use this for E2312 phone?
So thanks!
Click to expand...
Click to collapse
Of course you can
How does it compare to other kernels?
Does this kernel work with the Pexo rom?
I really REALLY want a kernel that has proper undervolt tables, because I can't stand my phone overheating randomly. Using Skymelon 9, it's alright but brings problems like overheating since it's running at higher frequency and the phone is already semi-snappy and I am not really gaming, since no games work that I like. For instance Shadowverse or Fate Grand Order. First game stutters and audio is distorted, while second game won't launch because phone is rooted.
zacharias.maladroit said:
The kernel currently is at a pretty early stage,
so bear with me - it's totally not where I want it to be (FauxSound, memory management improvements, even more battery/idle reductions, smoother operation, etc.)
but lack of time and focus on Xperia Z5* devices doesn't allow me to focus on it right now ...
Click to expand...
Click to collapse
Thanks for your Work Bro
cirnocirno said:
How does it compare to other kernels?
Does this kernel work with the Pexo rom?
I really REALLY want a kernel that has proper undervolt tables, because I can't stand my phone overheating randomly. Using Skymelon 9, it's alright but brings problems like overheating since it's running at higher frequency and the phone is already semi-snappy and I am not really gaming, since no games work that I like. For instance Shadowverse or Fate Grand Order. First game stutters and audio is distorted, while second game won't launch because phone is rooted.
Click to expand...
Click to collapse
No reason for it to not work with PexoROM
Mobile Data don't work on E2363 (dual) and kernel governor stay on "performance", all other is OK.
Keep your good work .
valyo_bg said:
Mobile Data don't work on E2363 (dual) and kernel governor stay on "performance", all other is OK.
Click to expand...
Click to collapse
Mobile data works here. For performance governor fix get the original init.qcom.post-boot.sh and put it in system/etc
@DavidMKD Its shows that mobile data is enabled, but there is no icon for 3g/LTE and every app report that phone is offline when WiFi is OFF. Enabling and disabling of mobile data don't helps.
Which version of M4 you have? Thanks for "performance fix", I will try to find proper file to replace inside system/etc or you can share it?
Edit: I found correct file and replace it and now kernel governor is interactive , only problem with mobile data remain, hopefully @zacharias.maladroit will fix soon.
valyo_bg said:
@DavidMKD Its shows that mobile data is enabled, but there is no icon for 3g/LTE and every app report that phone is offline when WiFi is OFF. Enabling and disabling of mobile data don't helps.
Which version of M4 you have? Thanks for "performance fix", I will try to find proper file to replace inside system/etc or you can share it?
Edit: I found correct file and replace it and now kernel governor is interactive , only problem with mobile data remain, hopefully will get fix soon.
Click to expand...
Click to collapse
I think you are right about mobile data, it doesn't work here either
Thanks for your work
can you add low brightness mod please?
the original init.qcom.post_boot.sh file from E2333
https://www.mediafire.com/file/5mqc9n16fqwxan1/init.qcom.post_boot.rar
the original wlan.ko for SMK users
https://www.mediafire.com/file/4ejnzel0vacrji1/wlan.rar
@zacharias.maladroit could you please fix mobile data problem? Mobile data is shown "enabled", but all apps report that they are offline.
Okay, updated the OP / first post with clearer instructions to get into Recovery,
LOT of folks are trying to mess with M4 Aqua users by posting WRONG instructions on how to get into fastboot or TWRP/recovery.
I thought I was (or Sony) going crazy with those differing Button combinations from M4 Aqua and Xperia Z5 but it's THE SAME !
fastboot:
Volume DOWN + connecting USB
Click to expand...
Click to collapse
Recovery:
Volume DOWN + Power button , Power release on Sony screen
Click to expand...
Click to collapse
No wonder people (or new starters) are having such a hard time to use this phone and start development for it (with that non-clarity , confusion and frustration)
Mark.05 said:
Thanks for your work
can you add low brightness mod please?
the original init.qcom.post_boot.sh file from E2333
https://www.mediafire.com/file/5mqc9n16fqwxan1/init.qcom.post_boot.rar
the original wlan.ko for SMK users
https://www.mediafire.com/file/4ejnzel0vacrji1/wlan.rar
Click to expand...
Click to collapse
Oh - been wondering what to make of the high brightness
Can you please point me to the modifications needed for it ?
With what tool or process the ramdisk/initramfs can be packed up again ?
valyo_bg said:
@zacharias.maladroit could you please fix mobile data problem? Mobile data is shown "enabled", but all apps report that they are offline.
Click to expand...
Click to collapse
Consider it done (take a look at the kernel folder) [ https://drive.google.com/open?id=0BykGGWB96CBQUFhXbG5sRUZMMWM ]
The kernel is still experimental and more of a proof of concept:
The iddd (idd daemon - or close to that name) is crashing and force-closing continually (last time I checked),
thus I renamed and moved it to the internal storage so that the Android/init system deactivates it
Thanks to @dani020110 for pointing at the offending commit that would cause the crashing of the new kernel
Kernel source is at:
https://github.com/zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2/commits/Nautilus_I.1
@zacharias.maladroit I can't download from your link - message "not found, error 404" appear.
Edit: just download successfully from first page of this topic, as soon is tested will inform you about results, thank you.
EUI 6.1 FINAL
6.1.712S_FKXOSOP617120407S
This is a stable release of the EUI 6.
Maximally close to the firmware, without any extraneous services and applications.
The main thing in this build:
- SMS Messenger from LeEco. Now fully work.
- The Contacts application is cured of an editing error
- Removed Google's analogs (sms, music, calendar)
- Build white (white bootanimation and splash screen)
- A compromise is found between performance and overheating
- more Russian
This build is the final release.
Installation is simple:
- maximum possible cleaning
- Installation via TWRP
- Magisk is put automatically
Reboot and configure.
The firmware is optimized within an hour.
Download links:
EUI 6.1.712S FINAL
- final release
GoogleDrive
EUI 6.0.617S ST2
- more bugfixes
is no longer available
EUI 6.0.617S RC3 ST
is no longer available
P.S. Who has a problem with the focus of the camera, this build also does not have its solution.
In build only 3 full languages:
English, Russian, Chinese
Important!
This is a fully saved port from the x850.
All EUI functional are presented in the form in which he got from the test build!
Only Fixed some issue.
It's RU build as the basis.
Working All and working fine.
The information below is part of the story. It is no longer relevant when installing and using the final release.
advantages of our build:
- we do not steal other people's works
- do not castrate the original system
- no blue diode
- there is Vulkan API
- correct and logical operation of the processor
- do not add strange software
- and we know how to do better without stealing
- and many many others!
EUI 6.0.617T port from X850
Installation:
Download the zip(s)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash ROM
Install Magisk (if you need)
Reboot
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
In build only 3 full languages:
English, Russian, Chinese
Now LeEco servers didn't work, but you may skip enter in you Account during Setup Wizard.
In this build work FP and most functions EUI, but online LeEco services didn't work (may be now, may be forever).
Important warnings for use:
//Never turn on this function!//
Otherwise, you will receive a reboot of the device instead of an incoming call. (this bug from x850)
//This function didn't work too//
When you turn on nothing will not happen, but the battery consumption will increase slightly
//After any reboot, wait up to 2-3 minutes. This will help avoid rebooting again.//
Tips and Tricks in second post later
Download:
- is no longer available
Contributors:
prsapphire
Kirich_Kumchenko
and LeEco
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: EUI 6
Version Information
Status: Final
Created 2018-01-05
Last Updated 2018-07-13
Already normally did not eat and did not sleep more than a month. Would you like to support my work, it would be nice. :laugh:
Not needed!!!
* Dolby Atmos work only with Magisk
If you want it, install this module:
download
*In build including Vulkan API drivers
cool thanks for your work
Everything is working? Thanks!
F*** yeah I have tried Eui 6.0 on Le Max 2 and it's great. Excellent thanks I'll try this out.
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
allrockedout said:
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
Click to expand...
Click to collapse
Read first post, if you do how in recommendation, your problems did not occur
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
Click to expand...
Click to collapse
prsapphire said:
Read first post, if you do how in recommendation, your problems did not occur
Click to expand...
Click to collapse
Yes I read it. I'm in system now will do more testing thanks
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
allrockedout said:
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
Click to expand...
Click to collapse
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
prsapphire said:
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
Click to expand...
Click to collapse
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
kihope12 said:
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
Click to expand...
Click to collapse
Read the post, all inside.
About other lng, I didn't plan added more.
prsapphire said:
Read the post, all inside.
About other lng, I didn't plan added more.
Click to expand...
Click to collapse
But i cant found any info about working non working things, only about FP
Does everything work on it ?
I will give a try and give you feedback.
3 dot in circle notification is back again. Any way to trick the system to show the correct icon of the app that sends the notification?
Rear Camera doesn't work, fingerprints works but slow, lag fixed, battery is bad, 50% to 5% in 4hours without turning screen on.
Anw thank devs very much.
does it lag like the previous eui 6 rom?
If you are on eui 6 alpha, you needn't wipe anything before rom installation
Devanshu Biswas said:
does it lag like the previous eui 6 rom?
Click to expand...
Click to collapse
Lag fixed
Everything is working?
roushankumarsharma said:
Everything is working?
Click to expand...
Click to collapse
Reading is the Secret instead of asking the same question multiple times. [email protected]
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
Requirements:
- oreo bootloader
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm64 8.1)
- Root not included. Flash magisk before first start.
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
gps
bt audio
stuff, I haven't checked
I broke my tablet. There are no more updates here further.
Download:
T820: https://drive.google.com/open?id=1ql4VIjTsSHNwzsoJm3Yb8wt0RW9OJerE
Device initial config sources:
https://github.com/bonuzzz
I was about to sell tablet...and get pixil c. Tablet is extremely laggy on stock Oreo. Switched back to your lineage 14.1 build which runs well but realized it was no longer supported. Very happy with your work! Thanks!
I'll give it a go when I get home. Thanks for supporting our device!
I did switch off WiFi upon initial setup, didn't seem to be liking 5g. After setup I switched to 5g WiFi but it kept showing no internet. My other devices don't have this problem. Not a big deal, just giving a heads up. I switched to 2g WiFi and all is well. Wayyyy smoother than stock Oreo. Didn't test gps, I know you said it wasn't working. I don't use GPS on my tablet so no loss there. Thanks again!
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Cool! I will be installing this shortly. I was going to switch the the tweaked stock Oreo but will much rather use Lineage since I prefer more of a "vanilla Android" over Samsung's version.
P.S. I recently got myself a pixelbook for chromeos+android+linux and I find myself using that way more than my tab s3. If you need anyone to test something that doesn't really care about stability, let me know!
Edit:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Thanks so much for this. I've been wanting to get an Oreo ROM like this for my S3
EDIT: Is there any chance you could just give a dump of your terminal session of the build? I had started to try & build 15.1 for the S3 WiFi, based on your work for the LTE version, but wasn't having any luck. I'm hoping that if you could provide a terminal dump, it could help me work through my issues to get the build working as well. Would appreciate it =]
Regardless, thanks for taking the time to build this for us WiFi owners! =D
Finally, T820! Have been waiting for this for months now. Gonna give this ROM a try ASAP :laugh:
Thank you so much for this! Testing this weekend.
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
Did you test the spen by any chance?
VVombat said:
Thank you so much for this! Testing this weekend.
Did you test the spen by any chance?
Click to expand...
Click to collapse
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
PuDLeZ said:
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
Click to expand...
Click to collapse
Mhm I'm using mainly Squid and Xodo to annotate and notate stuff. If you have them laying around anyways that would be nice, but if not no need to install and waste your time if I'll install tomorrow anyways. Thank you for your answer!
lineage-15.1-20180614-UNOFFICIAL-gts3lwifi doesn't work for me, bootloops, tried almost everything, etc.
RESOLVED: See below how and why.
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Hello, how to get Bluetooth working? I connect but no sound
Thank you also
Another problem, the sound slows down and stutters in applications (heavy or simple games)
JWnSC said:
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Click to expand...
Click to collapse
edited, thanks
yes, bt audio doesn't work. seems I broke it in last moment...
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
I have official keyboard case too. Unfortunately it's almost unusable in aosp if you need more than one keylayout. What about special keys, aosp doesn't have that triggers what stock rom has. I only could advice 3rd party app, but paid https://forum.xda-developers.com/showthread.php?t=1541916
HardWorker79 said:
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Click to expand...
Click to collapse
Nothing will change with official status except It would create more troubles and bureaucracy there.
Nobody will help. Believe me.
Comses said:
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Click to expand...
Click to collapse
I have an issue somewhere in audio behavior. Will check it deeper.
Comses said:
Another problem, the sound slows down and stutters in applications (heavy or simple games)
Click to expand...
Click to collapse
in games only? I've not noticed anything in videos.
samsuffit said:
Doesn't work for me.
What I did from Lineage 14.1:
- Upgraded TWRP to v3.2.1.1
- Wiped eveything
- Downloaded BRE2 firmware for my country
- Extracted BL....tar.md5 and flashed it with Odin v3.13.1
- Rebooted in recovery mode to be sure of... still don't know what
- Flashed Lineage 15.1
Then I could see the logo animation until the end, just before the system starts, then 3 boot loops and it went to recovery mode
I repeated the exact same sequence and flashed SuperSU v2.82-SR5, same result.
So...:
- Wipe everything
- Flash BL, CSC and CSC_HOME (no need of AP, system partition) with Odin
- Format/Erase Data
- Flash Lineage 15.1
Again a boot loop, this time without going back automaticaly to recovery mode.
Tried with SuperSU, boot loop...
So... This time I flashed eveything, reboot with Samsung Android, test a little bit, then:
- Flash TWRP v3.2.1.1
- Immediatly reboot to recovery mode
- Format/Erase Data
- Wipe everything
- Flash Lineage 15.1
Boot loop...
Tried with SuperSU, boot loop...
I was able to restore a full backup of my previous Lineage 14.1 installation.
What did I do wrong and which kind of logs do you need to help me to understand?
Thank you and thank you to have integrated S-Pen support, I love this thing. I don't realy need GPS.
Edit: in case it was mandatory I tried with Magisk v16.0 and v16.4 instead of SuperSU. Same boot loop.
If it's because I didn't flash the GAPPS, well... nevermind... I'll wait for something else.
Click to expand...
Click to collapse
Magisk is needed for device certification in Play store. That's because it should be flashed with gapps before first boot. So, rom works without gapps and root well.
For what region you downloaded oreo stock rom? I doubt but maybe samsung has different logic in bootloader for relocatable kernel stuff. It's strange how you restored lineage nougat, because that kernel shouldn't work with oreo bootloader.
edit: i'm wrong about bootloader and nougat, because I use now old twrp with nougat kernel.
Flashed old build. Have audio in bt, but don't have speaker rotation. I was sure it worked before...
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Hello @bonuzzz, thank you for the reply.
I was able to restore my Lineage 14.1 because I flashed the ARA2 boot loader (tried with Odin the first time, then with my TWRP backup, same result)
bonuzzz said:
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Click to expand...
Click to collapse
Only with VLC. Stuck in portrait mode with stock player. I don't have any games...
The last thing I need to try is installing the GAPPS... Like I said, I don't want to, so if the problem comes from this, I'll pass. But I have to try to be sure...
In this order from TWRP:
- Flash BRE2 boot loader
- Format Data and wipe everything
- Flash Lineage 15.1
- Flash openGAPPS nano arm64 8.1
- Flash Magisk 16.4
And... It's working...
Well...
I want to cry...
So the GAPPS are mandatory.
Thank you for creating a new os for sm-t820.
BT audio is working for me with Sony mdr zx220bt headphones
PixelPie 1.0 -By Team Pixel
Hey Everyone!PixelPie is a custom firmware that ports almost all of the features from a Pixel Device to a Samsung Firmware. This build has been based on the Pixel 3XL. It has been very deeply debloated and optimized for performance, whilst also bringing in many Pixel Features to our devices. It has also undergone a beta test ring, so most if not all of the listed features should be working! Here is a feature list:
Features:
1. AdAway
2. Google Calculator
3. Google Calendar
4. GCam arnova
5. Samsung Stock Camera with Massive HDR parameter changes, while also debloated
6. Google Chrome
6.1. rom works fast
7. Google Clock
8. Google Contacts
9. Google Files GO (File Manager)
10. Samsung Gallery (Stripped Down and lightened to improve performance)
11. GPay (Working Payment Method along with NFC functionality)
12. Google Keep (With Handwriting Libs)
13. Google Lens (Bixby Visions Alternative but works within Google Photos and Pixel Recents)
14. Magisk 19.0 Prebuilt (No Need For Seperate Flash)
15. Google Messages
16. Mtweaks 14.0 (Has GPU Control)
17. Eleven Music (Lineage OS 15.1)
18. Google Phone (Ported Framework for full functionality)
19. Google Photos (Warning: it upload in original quality because it thinks it is a Pixel)
20. Google Play Games
21. Settings debloated, along with framework
22. App Lock (Settings)
23. SystemUI Tuner (Updated)
24. Google Tasks
25. YouTube Vanced
26. Correctly Scaled Pixel Boot Animation (Pixel 2XL)
27. Google Sounds, animations, framework and configs.
28. Pixel Launcher with new gesture navigation and recents menu (Not Pill Navigation)
29. Digital Wellbeing
30. Dolby Atmos (With Gaming Mode) with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
31. GBoard and New Pie Emojis (Not Samsung Ones)
32. Incredibly Deep Debloat and DeKnoxed (Same as last time for performance and battery improvements)
33. VoLTE Supported
34. Pixel 3 Live Wallpapers with Normal Wallpapers too.
Bugs: NONE
Notes:
1. RAM management when fresh installed idles around 3.5 Free on 6gb note 9
2. ROM Size has fallen to small size from Stock size
3. Device Maintenance swapped for Files GO and SystemUI Tuner. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
5. Make sure you set Google Dialer as your default phone app. Goto Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
6. After first boot, reboot your device once.
7. Substratum does still work, just remember to get Samsung Substratum themes. -----IF ROM Support Substratum include-----
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTALL INSTRUCTIONS:
1. Download the zip
2. Wipe System, Data, Dalvik and Cache
3. Flash the zip
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Final Notes, Download Link and Sources:
Feel free to message me on telegram via the group: <Mod Removed>
Download Link 1.0: <Mod Removed>
Mirror Link 1.0 : <Mod Removed>
Kernel Source : http://opensource.samsung.com/reception.do
Credits:
@Skulldron and the entire Pixel Team
Samsung for their amazing device
Augustin for building the ROM
Check out the rom
samsung spen works
samsung health works
samsung gear works
includes gcam and samsung camera
https://imgur.com/a/DLbK8MG
pictures of rom
A new rom yay!!! Right now it's 12:30am here so I'll be downloading overnight and will be flashing the rom after morning ?? Thank you so much, can't wait to try it out!!
Awesome news..... Sound really interesting.. thank you for the new rom here in N9 section. Will flash it soon.
Does anyone has tested this ROM?
cool! Another Rom for our beloved NOTE 9.
Tried installing this, there is something wrong when setting up. Firstly on set up google does not recognise my old pin anymore after flashing. Tried a pincode less back up and that worked. Afterwards when further installing, it keeps asking for a fingerprint but you need to set it uo with a password. Password will get set up the first time and never get recognised again. After trying to set up and tried rebooting the phone screen keeps flickering on the unlock screen.
Hi xXpixelpieXx, please share rom thru Mega pls. Google Drive is too slow in my country.
Amazing news
Sent from my [device_name] using XDA-Developers Legacy app
Downloading Rom, can't wait to try it out!
so i flashed it today (twice) and after a phone restart i get the message "only official released binaries are allowed to be flashed" so i have to restore my phone from odin then restore from twrp. First time it happened i restarted after titanium backup and the second time i restarted after putting my email in the setup wizard.... please fix
wenjie1234 said:
Downloading Rom, can't wait to try it out!
Click to expand...
Click to collapse
good
karapoutsoglou said:
Amazing news
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes
eabrillos said:
Hi xXpixelpieXx, please share rom thru Mega pls. Google Drive is too slow in my country.
Click to expand...
Click to collapse
im uploading to mega check mirror link in op in 5 minutes
bartjeh1991 said:
Tried installing this, there is something wrong when setting up. Firstly on set up google does not recognise my old pin anymore after flashing. Tried a pincode less back up and that worked. Afterwards when further installing, it keeps asking for a fingerprint but you need to set it uo with a password. Password will get set up the first time and never get recognised again. After trying to set up and tried rebooting the phone screen keeps flickering on the unlock screen.
Click to expand...
Click to collapse
to skip fingerprint at setup: press the arrow back 1 time thats it?
osk4rin said:
Does anyone has tested this ROM?
cool! Another Rom for our beloved NOTE 9.
Click to expand...
Click to collapse
yes good rom
dsg2003 said:
Awesome news..... Sound really interesting.. thank you for the new rom here in N9 section. Will flash it soon.
Click to expand...
Click to collapse
please try it and give honest review also
Supracer said:
A new rom yay!!! Right now it's 12:30am here so I'll be downloading overnight and will be flashing the rom after morning ? Thank you so much, can't wait to try it out!!
Click to expand...
Click to collapse
good
Supracer said:
so i flashed it today (twice) and after a phone restart i get the message "only official released binaries are allowed to be flashed" so i have to restore my phone from odin then restore from twrp. First time it happened i restarted after titanium backup and the second time i restarted after putting my email in the setup wizard.... please fix
Click to expand...
Click to collapse
flash oreo bootloader and flash the rom again i have this every time i use pie bootloader just flash oreo bootloader it is because the bootloader for pie is not good and it contains problems.
https://androidfilehost.com/?fid=1395089523397887521
flash this in twrp to get oreo bl and then flash this rom and no more problem.
xXPIXELPIEXx said:
good
yes
im uploading to mega check mirror link in op in 5 minutes
to skip fingerprint at setup: press the arrow back 1 time thats it?
yes good rom
please try it and give honest review also
good
Click to expand...
Click to collapse
After setting up a password the phone wont recognise the password anymore. So if you reboot you cant use your phone anymore.... Also the screen starts flickering after the reboot. So you cant even enter anything...
Ok this is the 3rd time and I'm done trying for now... Sorry bro I really wished everything worked perfectly but after finishing up the setup wizard, I restarted my phone and I can't go past the lockscreen.... the screen is on loop (comes up for 1 sec and turns off for 10) and that's without restoring any apps.
xXPIXELPIEXx said:
flash oreo bootloader and flash the rom again i have this every time i use pie bootloader just flash oreo bootloader it is because the bootloader for pie is not good and it contains problems.
https://androidfilehost.com/?fid=1395089523397887521
flash this in twrp to get oreo bl and then flash this rom and no more problem.
Click to expand...
Click to collapse
how to restart phone if i have this error? i cnat reboot to twrp or odin mode. help pls
Used the ROM for quite a while and it's good. The only problem is that I cannot use anything to lock my phone. Fingerprint, face, iris or even the basic ones like pattern, password or pin. Everything just fail. Even you set-up pattern, it doesn't work
Supracer said:
Ok this is the 3rd time and I'm done trying for now... Sorry bro I really wished everything worked perfectly but after finishing up the setup wizard, I restarted my phone and I can't go past the lockscreen.... the screen is on loop (comes up for 1 sec and turns off for 10) and that's without restoring any apps.
Click to expand...
Click to collapse
ok hope u will consider our rom another time
peppect91 said:
how to restart phone if i have this error? i cnat reboot to twrp or odin mode. help pls
Click to expand...
Click to collapse
kindly flash stock rom if you dont know how to solve this :laugh: i post fix right above you :silly:
wenjie1234 said:
Used the ROM for quite a while and it's good. The only problem is that I cannot use anything to lock my phone. Fingerprint, face, iris or even the basic ones like pattern, password or pin. Everything just fail. Even you set-up pattern, it doesn't work
Click to expand...
Click to collapse
works fine for me i will investigate the bug
boys dont use fingerprint sensor or security settings press not now and continue setup press back arrow if you get the fingerprint sensor screen if you want security put pin on your sim card which will lock instantly every time you reboot :good:
https://forum.xda-developers.com/ga...tom-romers-t3923647/post79387468#post79387468
tips so everyone can avoid bugs on roms
peppect91 said:
how to restart phone if i have this error? i cnat reboot to twrp or odin mode. help pls
Click to expand...
Click to collapse
please help us we can't reboot to join in to twrp or odin mode please help
---------- Post added at 04:11 PM ---------- Previous post was at 03:55 PM ----------
after flashed your rom my phone is break please help .