Hello guys. Was trying to root the phone just to use viper4android. Was succesful at first, but after I wiped the data using TWRP, the phone was unable to start. Showing a message which says something like "the phone is unlocked, it is in risk bla bla.." and booting but reboots after a while and stock recovery shows up. Sometimes it just shows that booting message forever. Probably OS is all messed up. Couldnt find stock rom. So would appreciate anyone uploading it for me. Or if you have any other solutions I would be grateful.
Related
Hey guys!
So I followed the tutorial on rooting, The Honor 7 from this forum, at first it all went fine then upon installing SuperSU and restarting I got caught in a bootloop.
It now will only boot up to TWRP, and I cannot understand a thing it says as i'm in Chinese.
I've tried putting it into fastboot but the ADB thing will not recognize the phone to reboot, and i'm starting to think i've broken it
PLEASE HELP!
.. I did get it out of Bootlooping once, and to load up the normal EMUI, then had to reset to update SuperSU as it was an old version and now I cannot get back out of the bootloop again.
Hi,
the only version of SuperSU which is working with Honor7 is 2.62. All others cause bootloop.
Kind regards,
Sebastien.
Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us
Hello, my Alcatel Pop Up (6044D) it turns on but doesn't work at all, it stays in the Alcatel Logo.
This happened when I installed a Miui Room, when I wanted to go back to the STOCK with a backup from TWRP. The room was working, but it wasn't fast enough, that's why i tried to reverse, however in the reverse something happened in the process and it gave me an error and now I can't access to the recovery aswell, is there something I can do?
Thanks for the help!
If I can figure out a recovery for you then Ill instruct you on how to install it. goodluck!
Yesterday I tried to Flash LineageOS on my ATU-L21
The installation works fine but as the Phone reboots, it loops.
I waited the whole night, but nothing happens. Its Bootloop seems not to end up.
Does Anybody knows how to Install a custom Rom clearly without a bootloop?
I tried it with ADB and TWRP but nothing worked.
Almost the same issue as yours, im getting stucked on "Your devices cant be trusted" thing after i flash the stock rom. Please send help ((