This is a GSI (generic system image) for AOKP for devices with treble support...
this requires fastboot to flash the system image, if you dont know how to use fastboot, you shouldnt be here...
Downloads
https://www.androidfilehost.com/?w=files&flid=261339 - a/b-only system.img (for pixel devices also download vbmeta.img)
https://www.androidfilehost.com/?w=files&flid=264729 - a-only system.img
MAKE SURE YOU ARE ON A STOCK AOSP ROM OR A PREVIOUS TREBLE BUILD
commands:
FOR A-ONLY
$: fastboot flash system system.img
$: fastboot boot twrp.img
wipe data and reboot
FOR A/B ONLY
$: fastboot flash system_a system.img
(FOR PIXEL DEVICES)
$: fastboot flash vbmeta_a vbmeta.img
$: fastboot boot twrp.img
wipe data and reboot.
tested on the Pixel 2 XL
credit goes to the AOKP gang and @phhusson who without i wouldnt have been able to compile this
screenshots:
https://ibb.co/dBnFPn
https://ibb.co/kvGEH7
https://ibb.co/hOLVqS
has GApps and root, you just need phh-su from the play store
Can port to a-only support
support a/ab or only ab?
lmentor said:
support a/ab or only ab?
Click to expand...
Click to collapse
A/B only devices
masara59 said:
Can port to a-only support
Click to expand...
Click to collapse
I will port this to an a only device today
sixohtew said:
I will port this to an a only device today
Click to expand...
Click to collapse
Good idea
cannot get passed the unicorn screen that could be because i cannot fully boot into twrp and ideas on pixel 2 xl fixed twrp now bootloops
sixohtew said:
I will port this to an a only device today
Click to expand...
Click to collapse
can't hardly wait ...
Will give this a try when its more polished/has root!
Was so close I thought when I seen the unicorn but never fully booted..?
Format data usually fixes no boot, just remember it wipes internal storage.
Any advance on A-only devices.?
I used to flashed one of your roms on my moto x pure edition. Now I switched to huawei mate 9.
osk4rin said:
Any advance on A-only devices.?
I used to flashed one of your roms on my moto x pure edition. Now I switched to huawei mate 9.
Click to expand...
Click to collapse
I'm building a new a/b build and a only build..I had to make a lot of changes to get it this far and it's at 90% on the ab build and a should take a lot less time since it doesn't need as much.. the only thing is I'm not positive I've got su working yet. I need to test it, but it's coming....
And thanks for using my roms on the Moto x pure...I loved that phone...if someone didn't steal it I'd prolly still be building for that phone
sixohtew said:
I'm building a new a/b build and a only build..I had to make a lot of changes to get it this far and it's at 90% on the ab build and a should take a lot less time since it doesn't need as much.. the only thing is I'm not positive I've got su working yet. I need to test it, but it's coming....
And thanks for using my roms on the Moto x pure...I loved that phone...if someone didn't steal it I'd prolly still be building for that phone
Click to expand...
Click to collapse
Wow, great!
I'll wait for your new A-only build.
By the way, My favorite Rom on moto x pure, was your resurrection remix.
Thank you!
[UPDATE] new a/b build and finally a new a-only build with the most recent commits, including rom control app/setting. updating OP now with new links
$: fastboot boot twrp.img ????? Why?
No only flash system???
aureliomilitao said:
$: fastboot boot twrp.img ????? Why?
No only flash system???
Click to expand...
Click to collapse
you need to wipe the data and twrp is the best at it.. fastboot boot wont flash twrp to the recovery partition, just boot into it.. some devices cant flash twrp
A-Only up and running on Mate 10 Pro
no gapps?
Does this have the no sound during calls?
sixohtew said:
[UPDATE] new a/b build and finally a new a-only build with the most recent commits, including rom control app/setting. updating OP now with new links
Click to expand...
Click to collapse
Thank you!
Related
This is my version of TWRP built for the 2015 Moto X Play. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. Fastboot mode is used to flash or boot this recovery. To enter fastboot mode, turn off your device, hold PWR and VolDn for 3 seconds, then let go.
Differences between upstream TWRP and my fork:
My original green theme
No SuperSU
No TWRP app
No HTC Dumlock cruft
Updated pigz compressor (slightly faster and more tolerant of corruption)
To temporarily boot this recovery:
Code:
fastboot boot twrp.img
To permanently flash it:
Code:
fastboot flash recovery twrp.img
The download is up on the downloads tab.
XDA:DevDB Information
TWRP, Tool/Utility for the Moto X Play
Contributors
vache, squid2
Source Code: https://github.com/sultanqasim/android_device_motorola_lux
Version Information
Status: Stable
Current Stable Version: 3.2.3-r1
Stable Release Date: 2018-08-16
Created 2015-09-05
Last Updated 2018-08-16
Reserved
2015-09-17 :
-Fix flashing custom zips
Gr8!!
Is this actually built for X Play? I know it sounds silly but there's no kernel source yet is there? Or do we not need that to build recovery?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Yes it's build for X Play, based on G 2015 device tree. I'm using MSM8916 generic kernel from Motorola, modded by @squid2 (https://github.com/sultanqasim/android_kernel_motorola_msm8916)
Ahh that's great. Thanks for this my device should be delivered tomorrow so I'll be definitely using this.
We will still need kernel source for cm12 etc though surely?
Sent from my Vodafone Smart ultra 6 using Tapatalk
TWRP working fine here on XT1562
I'm making a stock TWRP Backup + some partition dump
Next move will be starting playing with CM12.1
ephumuris said:
Ahh that's great. Thanks for this my device should be delivered tomorrow so I'll be definitely using this.
We will still need kernel source for cm12 etc though surely?
Sent from my Vodafone Smart ultra 6 using Tapatalk
Click to expand...
Click to collapse
Yes i think we'll have to wait for kernel sources to get a working custom.
Already build one (SOKP) but cannot get it to boot (with stock kernel or msm8916 kernel)
Shreps said:
TWRP working fine here on XT1562
I'm making a stock TWRP Backup + some partition dump
Next move will be starting playing with CM12.1
Click to expand...
Click to collapse
can you please upload your dumps and backups if there are ready for it?
i have a broken XT1562 without a nandroid or other backups...
thanks
Thanks for this Vache! However, just to let you know this is still showing as Moto G 2015 when plugged into my PC whilst in recovery - not sure if that's normal or not?
skdubg said:
can you please upload your dumps and backups if there are ready for it?
i have a broken XT1562 without a nandroid or other backups...
thanks
Click to expand...
Click to collapse
Hi,
check this : http://moto.shreps.fr/?dir=Moto X Play (lux)/rom/stock_XT1562_EMEA-retfr/ZY2223RWB8
Shreps said:
Hi,
check this : http://moto.shreps.fr/?dir=Moto X Play (lux)/rom/stock_XT1562_EMEA-retfr/ZY2223RWB8
Click to expand...
Click to collapse
Hopefully they have a XT1563 full backup soon as well. Cheers.
Vibration and screen brightness are not working
Btw the stock firmware is out : http://www.filefactory.com/file/4ivu9kooeesf/?code=275
this one is for xt1563 CA
XMoDuLeSx said:
Vibration and screen brightness are not working
Btw the stock firmware is out : http://www.filefactory.com/file/4ivu9kooeesf/?code=275
this one is for xt1563 CA
Click to expand...
Click to collapse
@vache
Try adding these to the defconfig: https://github.com/sultanqasim/andr..._twrp2/arch/arm/configs/ext_config/lux.config
EDIT: I made a dedicated defconfig that you can try for this recovery: https://github.com/sultanqasim/andr...p2/arch/arm/configs/msm8916-minilux_defconfig
Wow thanks for your great work. Soon, we'll be able to get custom kernel to go with the stock firmware. We will probably get better performance with a properly tuned CPU governor. I'd also love to see CM12 being ported but the Moto firmware is already really good. In fact, I'm not sure if I could live without the added feature like Moto Voice and Moto Assist.
squid2 said:
@vache
Try adding these to the defconfig: https://github.com/sultanqasim/andr..._twrp2/arch/arm/configs/ext_config/lux.config
EDIT: I made a dedicated defconfig that you can try for this recovery: https://github.com/sultanqasim/andr...p2/arch/arm/configs/msm8916-minilux_defconfig
Click to expand...
Click to collapse
@squid2 Did you used the lux_defconfig in ext_defconfig ?
Already tried with those addition, the phone boot but i have no RIL. (Stock ROM)
Ill post a new reco with this kernel.
EDIT : Published a new version, with the new kernel config, that fix brightness and vibration.
Shreps said:
Hi,
check this : http://moto.shreps.fr/?dir=Moto X Play (lux)/rom/stock_XT1562_EMEA-retfr/ZY2223RWB8
Click to expand...
Click to collapse
So flashing this restores functionality on a XT1562?
And another thing, if your TWRP version is working when I fastboot boot it, is it guaranteed that it'll work when I fastboot flash it? And another thing: Is there a possibility to backup stock recovery, just in case TWRP doesn't work properly? I tried booting your TWRP version and backing it up but that didn't work (duh.)
Best wishes
derelektrischemoench
derelektrischemoench said:
So flashing this restores functionality on a XT1562?
And another thing, if your TWRP version is working when I fastboot boot it, is it guaranteed that it'll work when I fastboot flash it? And another thing: Is there a possibility to backup stock recovery, just in case TWRP doesn't work properly? I tried booting your TWRP version and backing it up but that didn't work (duh.)
Best wishes
derelektrischemoench
Click to expand...
Click to collapse
Stock Recovery is also available on my backup.
And yes, if TWRP is working while booting it, should work also fine when flashing it.
Be sure to use the latest version by @vache
Ok thx.
And another thing, I made a backup of my recovery partition via ls -al /dev/block/platform/7824900.sdhci/by-name
followed by
dd if=/dev/block/mmcblk0p32 (the partition that had the name "recovery"assigned in the output of the first command)
and got a nice recovery.img written to my sdcard.
Now from my understanding, in case something goes wrong with TWRP i should be able to restore my stock recovery via fastboot flash recovery nameoftheimagethatidumped.img, is that correct?
Greetz DeM
squid2 said:
@vache
Try adding these to the defconfig: https://github.com/sultanqasim/andr..._twrp2/arch/arm/configs/ext_config/lux.config
EDIT: I made a dedicated defconfig that you can try for this recovery: https://github.com/sultanqasim/andr...p2/arch/arm/configs/msm8916-minilux_defconfig
Click to expand...
Click to collapse
Got it booting, my repack method was wrong. All seems to work fine now.
Now trying to build a custom ROM.
Hi all,
I've made my work on AOSP Phh-Treble as modular as possible, so that it can be reused on other ROMs.
As part of this effort, I'm releasing GSIs of LineageOS
This is a GSI, and true to the GSI spirit. It aims at supporting a maximum number of devices, but only with AOSP-available hardware features.
All credits obviously goes to LineageOS developers
v5: (2018-06-27)
Image for ARM64 A-only device with gapps
Image for ARM64 A-only device vanilla
Image for ARM64 A/B device with gapps
Image for ARM64 A/B device vanilla
Image for ARM32 A-only device with Android Go gapps
Image for ARM32 A-only device vanilla
v4: (2018-05-19)
Image for ARM64 A-only device
Image for ARM64 A/B device
Image for ARM32 A-only device
Image for ARM32 A-only devices, with Android Go gapps
V3: (2018-04-05)
Image for ARM64 A-only device
Image for ARM64 A/B device
Image for ARM32 A-only device
ChangeLog:
v4 (2018-05-19):
- Blackview A20 edition! Thanks to blackview for giving me this Android Go test device
- Fix Accents
- Update to latest AOSP Phh-Treble patches
- New Android Go variant with gapps
v3 (2018-04-05):
- Fix Galaxy S9 backlight control
- Support exfat sdcards on devices with exfat support in kernel
- Resize /system to maximum size on first boot
v2 (2018-03-26):
- Fix Galaxy S9 backlight control
How to build:
Code:
git clone https://github.com/phhusson/treble_experimentations
mkdir Lineage; cd Lineage
bash ../treble_experimentations/build-rom.sh android-8.1 lineage
Great Work!
Thanks for your work. I'll try this rom this weekend (I had problems with your other AOSP roms, I can't boot except the v9 one. I hope this version will boot).
iBen68 said:
Thanks for your work. I'll try this rom this weekend (I had problems with your other AOSP roms, I can't boot except the v9 one. I hope this version will boot).
Click to expand...
Click to collapse
I doubt it will boot.
What device is this? Could you get logs?
phhusson said:
I doubt it will boot.
What device is this? Could you get logs?
Click to expand...
Click to collapse
Huawei Mate 10 Pro BLA-L09. I will try to get logs when I try this rom.
Great work
bootloop on xperia xz1
i flashed it on stock rom and wipe userdata,cache on fastboot and also tried on twrp factory reset and cache,cache dalvik(i tried your aosp v9 v10 v11 it also doesn't work)
phhusson said:
I doubt it will boot.
What device is this? Could you get logs?
Click to expand...
Click to collapse
How can I get logs at this point?
eggimong said:
bootloop on xperia xz1
i flashed it on stock rom and wipe userdata,cache on fastboot and also tried on twrp factory reset and cache,cache dalvik(i tried your aosp v9 v10 v11 it also doesn't work)
Click to expand...
Click to collapse
Can you try this?
https://www.google.fr/amp/s/forum.x...l/how-to/treble-roms-pixel-2-xl-t3764851/amp/
What's the precise behaviour you're witnessing?
Do you get the White Android bootanimation, or only sony's logo?
Does it actually reboot when looping? You see the sony logo reappearing?
Does the device reboot to bootloader mode?
phhusson said:
I doubt it will boot.
What device is this? Could you get logs?
Click to expand...
Click to collapse
When I try
Code:
adb logcat
I got this:
Code:
PS C:\ADB> adb logcat
- waiting for device -
The adb daemon seems not to be started while the bootloop. When I go back to the AOSP v9 rom, I can see logs with the same command but it's pointless since this rom is booting well.
iBen68 said:
When I try
Code:
adb logcat
I got this:
Code:
PS C:\ADB> adb logcat
- waiting for device -
The adb daemon seems not to be started while the bootloop. When I go back to the AOSP v9 rom, I can see logs with the same command but it's pointless since this rom is booting well.
Click to expand...
Click to collapse
Does adb devices -l sees it?
phhusson said:
Can you try this?
https://www.google.fr/amp/s/forum.x...l/how-to/treble-roms-pixel-2-xl-t3764851/amp/
What's the precise behaviour you're witnessing?
Do you get the White Android bootanimation, or only sony's logo?
Does it actually reboot when looping? You see the sony logo reappearing?
Does the device reboot to bootloader mode?
Click to expand...
Click to collapse
Only sony's logo and it reappearing until I turn off the phone
eggimong said:
Only sony's logo and it reappearing until I turn off the phone
Click to expand...
Click to collapse
And did you try what's in the link I've given you?
phhusson said:
And did you try what's in the link I've given you?
Click to expand...
Click to collapse
can't flash on vbmeta partition with error
fastboot flash vbmeta vbmeta.img
FAILED <remote: Flashing is not allowed for partition>
Is it possible to build this w/ MicroG?
LiveDisplay and LED while charging do not work on Mido everything else work just fine
NadavCE said:
Is it possible to build this w/ MicroG?
Click to expand...
Click to collapse
Assume you're asking due to the news about Gapps and 'Uncertified Device' problems.
Seems like a lot more is riding on MicroG now ...
Also, pretty sad that Google have done this ... Treble was probably the best thing they've done for Android since its inception, both for custom ROM development and potentially speeding up software updates for those who don't tinker with their phones.
mudnightoil said:
Assume you're asking due to the news about Gapps and 'Uncertified Device' problems.
Seems like a lot more is riding on MicroG now ...
Also, pretty sad that Google have done this ... Treble was probably the best thing they've done for Android since its inception, both for custom ROM development and potentially speeding up software updates for those who don't tinker with their phones.
Click to expand...
Click to collapse
Well custom ROMs are whitelisted and so far I have not reported any issue with the Uncertified Device stuff on this GSI nor on RR GSI either, both by phhusson of course
patrick395x said:
Well custom ROMs are whitelisted and so far I have not reported any issue with the Uncertified Device stuff on this GSI nor on RR GSI either, both by phhusson of course
Click to expand...
Click to collapse
I don't think that is expected to remain the status quo. In fact if you read the screen / article, people running custom ROMs are expected to manually register their devices with Google ... and whether that is just a registration or additional tracking is unclear.
mudnightoil said:
I don't think that is expected to remain the status quo. In fact if you read the screen / article, people running custom ROMs are expected to manually register their devices with Google ... and whether that is just a registration or additional tracking is unclear.
Click to expand...
Click to collapse
I know, I read the article, but until we receive the Android ID registration we can keep using custom ROMs in an uncertified manner, once we are required to registrate our device we will see what happens
Update 20180806:
There are many device-related bugs as we can see.
Different hardwares/softwares will cause different bugs on different devices, and there's probably no way to fix all of them just by modifying this port, but by porting it to devices respectively.
Anyone feel free to do it on your device and distribute your patches and ports based on this one.
Look into the P semi-GSI and system/vendor images from other P preview to get some idea.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Vivo X21 so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Only working on Qualcomm fully-Trebled deivces.[/B]
Known Bugs:
Keymaster not fully working on some platforms.(Lockscreen password may broken)
Features likely broken:
Advanced settings,fingerprint,SMS sending,ime
Almost Working in all deivces:
Boot
VoLTE
WLAN
BT
...
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract FuntouchOS_P_port.7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore Funtouch OS /system with TWRP
4.flash patch zip
5.wipe data,flash fbe_disabler and Permissiver (from semiGSI thread) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
Credits:
Special thanks to @erfanoabdi
Vivo for ROM
Xiaomi for device
ChangeLog:
v3(20180729):IME Keyboard fixed.
Keymaster improved.
v2(20180727)ebloated /system to 2.8g
Major fixes about UI and vivo system services.
v1(20180727): Initial release.
Download
GDrive: https://drive.google.com/drive/folders/14RLFFu3mHDCdtOIzvH0IEDjZRZ_iZK_K?usp=sharing
BaiduNetdisk: https://pan.baidu.com/s/1KyzS0k_464BQSqOhQBjOQw pass: 8s5w
Older version:
v1:
ROM
https://drive.google.com/file/d/1WfcsihieEbFoypWxqW1K5DC-TOEFKDuk/view?usp=sharing
Patch
https://drive.google.com/file/d/1U58Cb42K0RgxoV9RXSC2boYqke6yPgm6/view?usp=sharing
ROM link is not working.
Hyapatia said:
ROM link is not working.
Click to expand...
Click to collapse
Me too
Download link updated!
fxsheep said:
Download link updated!
Click to expand...
Click to collapse
Ok I will try it,nice job:good:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My Xiaomi MI 6 ...
Okay...I'll release a debloated one later,need at least 3gb /system
fxsheep said:
My Xiaomi MI 6 ...
Click to expand...
Click to collapse
Yeah an exception cuz almost every device has 2.8-9-3gb system partition.
so big?
omarilzz said:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Click to expand...
Click to collapse
me too:crying:
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
AB ???
……
system 3.4g and my device is huawei……
Sent from my Honor V9 using XDA Labs
SGCMarkus said:
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
Click to expand...
Click to collapse
Have tested lol
Damn, that shows how ridiculously bloated some of OEM Roms are...
(my 5t has 2.9gb system, and it's rather clean out of the box)
NOT working on devices with /system smaller than 3.7G.
Slim-down Brother! so, everyone can use, remove all app which is available in playstore.
Thanks
where is selinux_disabler??
onism said:
where is selinux_disabler??
Click to expand...
Click to collapse
Permissiver.zip from semi-GSI thread
After some effort I have rebased the twrp tree for merlin to twrp 3.6.2_11-0 and after some builds and revisions I have it fully working
Credits:
Me (rebased tree)
Val (built for me as I have potato pc)
Cane (tested for me I literally don't own merlin lol)
method to install:
fastboot flash recovery (insert path to downloaded twrp here)
Device tree:
GitHub - halal-beef/twrp_device_xiaomi_merlin
Contribute to halal-beef/twrp_device_xiaomi_merlin development by creating an account on GitHub.
github.com
areallydumbperson said:
After some effort I have rebased the twrp tree for merlin to twrp 3.6.2_11-0 and after some builds and revisions I have it fully working
Credits:
Me (rebased tree)
Val (built for me as I have potato pc)
Cane (tested for me I literally don't own merlin lol)
method to install:
fastboot flash recovery (insert path to downloaded twrp here)
Device tree:
GitHub - halal-beef/twrp_device_xiaomi_merlin
Contribute to halal-beef/twrp_device_xiaomi_merlin development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
hi i want to install shrp or twrp and I'm currently on miui 12.0.1 and android 10. Which ver. of shrp or twrp should I install.
Just for general knowledge can you tell me whether I should be concerned about the twrp and the android version on which I'm installing it?
For twrp you should be able to install this twrp and other twrp but shrp I'm not too sure of
My phone isnt detected in sideload, is that because of the TWRP or have I done something wrong?
TheEpicFlame said:
My phone isnt detected in sideload, is that because of the TWRP or have I done something wrong?
Click to expand...
Click to collapse
May be your drivers
areallydumbperson said:
May be your drivers
Click to expand...
Click to collapse
Used a twrp from the messenger group and it worked fine.
Does it work on the M2003J15SG model with the MIUI 12.5.5 RJOEUXM? (1st April 2022 Patch)
It has an unlocked bootloader and I'm trying to escape the MIUI.
Mineplayerminer said:
Does it work on the M2003J15SG model with the MIUI 12.5.5 RJOEUXM? (1st April 2022 Patch)
It has an unlocked bootloader and I'm trying to escape the MIUI.
Click to expand...
Click to collapse
you can try shrp its great download the latest version from their official site
Mineplayerminer said:
Does it work on the M2003J15SG model with the MIUI 12.5.5 RJOEUXM? (1st April 2022 Patch)
It has an unlocked bootloader and I'm trying to escape the MIUI.
Click to expand...
Click to collapse
Most likely yes
Manjotbenipal said:
you can try shrp its great download the latest version from their official site
Click to expand...
Click to collapse
Yeah, I saw this recovery earlier. Will it wipe my phone and internal storage after flashing this? What, if the flash fails or something happens during that? I've heard, that MediaTek phones are harder to unbrick. I just need a root to get rid of the MIUI apps. Unless there will be another daily driver ROM like the Project Elixir that is in the beta. The only thing I would miss will be the Redmi Buds 3 Pro pop-up message, or the Mi Band 5 proximity unlock. It's wonderful that someone is still trying to develop something better for that phone.
Edit: Ignore my broken grammar.
Mineplayerminer said:
Yeah, I saw this recovery earlier. Will it wipe my phone and internal storage after flashing this? What, if the flash fails or something happens during that? I've heard, that MediaTek phones are harder to unbrick. I just need a root to get rid of the MIUI apps. Unless there will be another daily driver ROM like the Project Elixir that is in the beta. The only thing I would miss will be the Redmi Buds 3 Pro pop-up message, or the Mi Band 5 proximity unlock. It's wonderful that someone is still trying to develop something better for that phone.
Edit: Ignore my broken grammar.
Click to expand...
Click to collapse
You can rest easy my friend i have used shrp for android 11 and it's great
It will not wipe your data
And my phone was rooted while flashing shrp
Just don't forget to disable avb before flashing both magisk patched boot.img and
shrp(fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
Coz I have faced the aftermath of not doing it which got me stuck in a bootloop.
It A12 supported ???
muerto_parao said:
It A12 supported ???
Click to expand...
Click to collapse
I don't know I'm kinda scared too as i have downgraded to android 10 and now finding it difficult to get a suitable version of twrp!
Manjotbenipal said:
I don't know I'm kinda scared too as i have downgraded to android 10 and now finding it difficult to get a suitable version of twrp!
Click to expand...
Click to collapse
It doesn't support A12, I flashed it already
muerto_parao said:
It doesn't support A12, I flashed it already
Click to expand...
Click to collapse
It'd take some effort for A12 support
areallydumbperson said:
It'd take some effort for A12 support
Click to expand...
Click to collapse
That's would be great , man
areallydumbperson said:
After some effort I have rebased the twrp tree for merlin to twrp 3.6.2_11-0 and after some builds and revisions I have it fully working
Credits:
Me (rebased tree)
Val (built for me as I have potato pc)
Cane (tested for me I literally don't own merlin lol)
method to install:
fastboot flash recovery (insert path to downloaded twrp here)
Device tree:
GitHub - halal-beef/twrp_device_xiaomi_merlin
Contribute to halal-beef/twrp_device_xiaomi_merlin development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Does this twrp support installation of custom roms and have close avb2.0 option?
Custom ROM installs should be supported but avb2.0 patching isn't included in the recovery as this is a clean unmodified twrp
doesn't boot from recovery.img not from fastboot boot either
whyem1x said:
doesn't boot from recovery.img not from fastboot boot either
Click to expand...
Click to collapse
worked after returning to android 10
Build Lineage 18.1 for MIPAD 5 Pro (vanilla - without gapps)
Pen and keyboard not work!
What's in the assembly:
1) Fixed charging when the device is off
2) Fixed volume levels
3) Fixed the name of the device
4) System is available for write, you can make your edits
Download link: https://www.androidfilehost.com/?w=files&flid=335163
How to flash:
fastboot reboot fastboot
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash system lineage_18.1_elish.img
fastboot -w
fastboot reboot
If you use a magnetic cover, install flipflap.apk and give him the root right
Boot with magisk: https://www.androidfilehost.com/?w=files&flid=335211
GApps can be installed as module magisk
https://github.com/wacko1805/magiskgapps
Or microg + aurora
https://themagisk.com/microg-installer/
https://f-droid.org/en…ages/com.aurora.store/
Problems and their solutions:
1) Sound problems. Settings - Phh Treble Settings - Misc features - Disable audio effects
2) 120 Hz screen. Settings - Phh Treble Settings - Misc Feature - Force FPS - 120
3) Hide the PHH Treble Settings section in settings. adb shell "pm disable me.phh.treble.app/.TopLevelSettingsActivity"
The source image: https://sourceforge.net/projects/an...20220616-UNOFFICIAL-arm64_bvS.img.xz/download
HProt said:
Build Lineage 18.1 for MIPAD 5 Pro (vanilla i.e without gapps)
What's in the assembly:
1) Fixed charging when the device is off
2) Fixed volume levels
3) Fixed the name of the device
4) System is available for write, you can make your edits
If you use a magnetic cover, install flipflap.apk and give him the root right
Download link: https://4pda.to/pages/go/?u=https://mega.nz/file/FcVHARAS#is5R6zrSOp8HsbY4VIWLO8bWuw2k1jDuYGKEqk052uY&e=116028277
Click to expand...
Click to collapse
Honestly lack of development is only reason i didn't bought this device. Can't try yourself but huge thanks for trying
Amazing work! Was planning on giving custom ROMs ago when DotOS released properly.
How are we flashing this?
VortexHD said:
Amazing work! Was planning on giving custom ROMs ago when DotOS released properly.
How are we flashing this?
Click to expand...
Click to collapse
fastboot reboot fastboot
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash system lineage_18.1_elish.img
fastboot -w
fastboot reboot
Any chance of adding a dialer so I can make and take calls on the 5g model?
mickfitz said:
Any chance of adding a dialer so I can make and take calls on the 5g model?
Click to expand...
Click to collapse
The system is available for writing, you can put the apk to priv-app folder
Wow, can't wait to try!! Thanks for your effort! I have the 5g model. If I don't pursue voice calls, does it work without any modification? (I can't programme...). Also does the pen work? Cheers!
UmiCat said:
Wow, can't wait to try!! Thanks for your effort! I have the 5g model. If I don't pursue voice calls, does it work without any modification? (I can't programme...). Also does the pen work? Cheers!
Click to expand...
Click to collapse
Pen and keyboard will only work on miui
HProt said:
Pen and keyboard will only work on miui
Click to expand...
Click to collapse
OK thanks! Does the ROM work with the 5g model? (my other question)
No such device, I can't check. The system will definitely work, calls and SMS i don't know.
If you have the opportunity, try rom and write about the result
HProt said:
If you have the opportunity, try rom and write about the result
Click to expand...
Click to collapse
Are you going to update it monthly and fix bugs etc. ?
Thanks for your effort, nay I know can I flash gapps from fastboot ?
which gapps can be used 32bit or 64bits
Thanks
toystory3000 said:
Thanks for your effort, nay I know can I flash gapps from fastboot ?
which gapps can be used 32bit or 64bits
Thanks
Click to expand...
Click to collapse
no
Use magisk and install gapps or microg
Example: https://github.com/wacko1805/magiskgapps
EugenStanis said:
Are you going to update it monthly and fix bugs etc. ?
Click to expand...
Click to collapse
If possible and free time
amazing work
Hi, I saw 2 files
boot_V13.0.10.0_magisk_v25.1.rarboot_V13.0.8.0_magisk_v25.1.rarBut I am now on V13.0.6.0 and can't see any update to 13.0.8 or 13.0.10, do I need too update the firmware first (13.0.8 or 13.0.10) to flash the "rooted boot" boot_V13.0.10.0_magisk_v25.1.rar or boot_V13.0.10.0_magisk_v25.1.rar
Thanks!
toystory2000 said:
Hi, I saw 2 files
boot_V13.0.10.0_magisk_v25.1.rarboot_V13.0.8.0_magisk_v25.1.rarBut I am now on V13.0.6.0 and can't see any update to 13.0.8 or 13.0.10, do I need too update the firmware first (13.0.8 or 13.0.10) to flash the "rooted boot" boot_V13.0.10.0_magisk_v25.1.rar or boot_V13.0.10.0_magisk_v25.1.rar
Thanks!
Click to expand...
Click to collapse
magisk_13.0.6.0.RKYCNXM_patched-24100.img | by greatslon for Pad 5 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
HProt said:
magisk_13.0.6.0.RKYCNXM_patched-24100.img | by greatslon for Pad 5 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks a lot
bug
wired headset does not work