Related
Somehow, trying to install TWRP via fastboot, I've soft bricked myself.
I can boot into fastboot mode and that's about it. My bootloader says it's still locked even though I've attempted to unlock it via the fastboot oem unlock command.
So I'm kinda stuck at the fastboot mode screen or the 1+ screen.
Any idea's?
I'm soft bricked too.
Unrooted using KingRoot and then tried to install the 2.1.3 update.
It failed and now I can't get into the system. What should I do? Can I unlock my bootloader in this state?
Try fastboot boot ( name of twrp recovery file).img
Sent from my OnePlus X
---------- Post added at 12:37 AM ---------- Previous post was at 12:35 AM ----------
Open cmd prompt in the same folder where you flashed twrp.
Sent from my OnePlus X
---------- Post added at 12:40 AM ---------- Previous post was at 12:37 AM ----------
Calvin2394 said:
I'm soft bricked too.
Unrooted using KingRoot and then tried to install the 2.1.3 update.
It failed and now I can't get into the system. What should I do? Can I unlock my bootloader in this state?
Click to expand...
Click to collapse
If you didn't swipe unlock bootloader in developer settings I don't think you can. Also can you get into fastboot?
Sent from my OnePlus X
i have the same exact issue, i didn't select unlock bootloader in development settings
mawells787 said:
Try fastboot boot ( name of twrp recovery file).img
Sent from my OnePlus X
---------- Post added at 12:37 AM ---------- Previous post was at 12:35 AM ----------
Open cmd prompt in the same folder where you flashed twrp.
Sent from my OnePlus X
---------- Post added at 12:40 AM ---------- Previous post was at 12:37 AM ----------
If you didn't swipe unlock bootloader in developer settings I don't think you can. Also can you get into fastboot?
Sent from my OnePlus X
Click to expand...
Click to collapse
Yep, can get into fastboot. Should I first just boot TWRP using fastboot boot, and then
1. Wipe system, 2. Install OTAs?
Edit: Unable to fastboot boot, says Device not unlocked
Edit 2: fastboot oem unlock works! Let's try flashing recovery.
The following procedure will only work if you have a microSD card with adapter for a computer. You need to download the stock rom and save it to the microSD card then place it back into the X.
Ok guys, you should still have stock recovery if twrp didn't flash. Go to this thread http://forum.xda-developers.com/showthread.php?t=3244996
Click the link to download otas, only download the one with this file name ( OnePlusOxygen_14_OTA_003_all_201510241934 ). You can flash this file through stock recovery. It should preserve your data. I personally did this while I still had a locked bootloader.
If you can't do this now, just turn the phone off and leave it charging for a while. Then just try to turn it on, or try to get into recovery.
Sent from my OnePlus X
---------- Post added at 01:03 AM ---------- Previous post was at 01:00 AM ----------
Calvin2394 said:
Yep, can get into fastboot. Should I first just boot TWRP using fastboot boot, and then
1. Wipe system, 2. Install OTAs?
Edit: Unable to fastboot boot, says Device not unlocked
Click to expand...
Click to collapse
Ok well then try to go into recovery the manual way. I believe it's power + volume up.
Sent from my OnePlus X
---------- Post added at 01:05 AM ---------- Previous post was at 01:03 AM ----------
Don't wipe anything, unless you have the stock rom readily available.
Sent from my OnePlus X
mawells787 said:
The following procedure will only work if you have a microSD card with adapter for a computer. You need to download the stock rom and save it to the microSD card then place it back into the X.
Ok guys, you should still have stock recovery if twrp didn't flash. Go to this thread http://forum.xda-developers.com/showthread.php?t=3244996
Click the link to download otas, only download the one with this file name ( OnePlusOxygen_14_OTA_003_all_201510241934 ). You can flash this file through stock recovery. It should preserve your data. I personally did this while I still had a locked bootloader.
If you can't do this now, just turn the phone off and leave it charging for a while. Then just try to turn it on, or try to get into recovery.
Sent from my OnePlus X
---------- Post added at 01:03 AM ---------- Previous post was at 01:00 AM ----------
Ok well then try to go into recovery the manual way. I believe it's power + volume up.
Sent from my OnePlus X
---------- Post added at 01:05 AM ---------- Previous post was at 01:03 AM ----------
Don't wipe anything, unless you have the stock rom readily available.
Sent from my OnePlus X
Click to expand...
Click to collapse
Sorry for bothering you, I managed to unlock my bootloader and flash recovery. I'll flash stock OTAs now and it should boot up fine.
Thank you so much for your time
How did you manage to unlock your bootloader? I cannot even get into stock recovery...It's either fastboot or nothing!
joey24z1 said:
How did you manage to unlock your bootloader? I cannot even get into stock recovery...It's either fastboot or nothing!
Click to expand...
Click to collapse
you need fastboot to unlock bootloader not recovery
Yeah, I must have tried the fastboot oem unlock command about 100 times....It just reboots and then sits on the 1+ screen......I'm stumped!
joey24z1 said:
Yeah, I must have tried the fastboot oem unlock command about 100 times....It just reboots and then sits on the 1+ screen......I'm stumped!
Click to expand...
Click to collapse
Bad news. You'll need to do a remote support session with OnePlus to have your phone reflashed with their Qualcomm tool.
Sorry for OT, didn't want to create another thread!
Here's what I did
1. Unlocked the bootloader
2. Flashed eng.stk TWRP recovery
3. Flashed OxygenOS 2.1 OTA 003
4. Flashed OxygenOS 2.1.3 OTA 004 + OTA 005
5. Rooted using SuperSU
6. Installed eng.stk blu_spark kernel
SOMEHOW, I still have my modem and IMEI partitions!
Does that mean I just need to
1. Flash stock ROM
2. Relock bootloader
To reclaim warranty?
Edit: I wiped /system before flashing OxygenOS
Calvin2394 said:
Sorry for OT, didn't want to create another thread!
Here's what I did
1. Unlocked the bootloader
2. Flashed eng.stk TWRP recovery
3. Flashed OxygenOS 2.1 OTA 003
4. Flashed OxygenOS 2.1.3 OTA 004 + OTA 005
5. Rooted using SuperSU
6. Installed eng.stk blu_spark kernel
SOMEHOW, I still have my modem and IMEI partitions!
Does that mean I just need to
1. Flash stock ROM
2. Relock bootloader
To reclaim warranty?
Edit: I wiped /system before flashing OxygenOS
Click to expand...
Click to collapse
Unlocking bootloader or installin super su doesnt voids your op warranty
mohammedtabish said:
Unlocking bootloader or installin super su doesnt voids your op warranty
Click to expand...
Click to collapse
So what does?
Usually when installing a ROM, /system needs to be wiped.
If /system wipe does not lose my IMEI partitions, I could just reflash stock ROM and my warranty is back?
Edit: Are you sure a bootloader unlock doesn't void warranty?
It was true for OPO, same goes for OPX?
Tapatalk'd from my OnePlus X
Calvin2394 said:
So what does?
Usually when installing a ROM, /system needs to be wiped.
If /system wipe does not lose my IMEI partitions, I could just reflash stock ROM and my warranty is back?
Tapatalk'd from my OnePlus X
Click to expand...
Click to collapse
If you hard brick your device or burn your cpu by overlocking or somehow
So what happens you can't unlock your boootloader? When I go into fastboot, enter fastboot oem unlock, the only thing that happens is it reboots and then gets stuck on the logo screen...Any ideas?
joey24z1 said:
So what happens you can't unlock your boootloader? When I go into fastboot, enter fastboot oem unlock, the only thing that happens is it reboots and then gets stuck on the logo screen...Any ideas?
Click to expand...
Click to collapse
Did you checked the option of oem unlocking in developers mode?
Yeah, it was unlocked before I got the bootloop
What does the following command gives ?
Code:
fastboot devices
erwann.jeanneau said:
What does the following command gives ?
Code:
fastboot devices
Click to expand...
Click to collapse
It should supply a string of numbers if your phone is connected in fastboot. If nothing comes up, the adb isn't seeing your phone.
I was trying to update the Moto E 1st Gen with whatever official update was pending, and then I did a factory reset. Now my phone is stuck on the big M logo.
The bootloader is locked.
adb devices says 'unauthorized'. fastboot devices doesn't list anything. RSDLite doesn't detect it. What to do?
cubancigar11 said:
I was trying to update the Moto E 1st Gen with whatever official update was pending, and then I did a factory reset. Now my phone is stuck on the big M logo.
The bootloader is locked.
adb devices says 'unauthorized'. fastboot devices doesn't list anything. RSDLite doesn't detect it. What to do?
Click to expand...
Click to collapse
Flash stock lollipop in fastboot
Usually first boot will take 10 - 15 mins
How to I flash stock? Does it work on locked bootloader? 'Enable USB Debugging' was never enabled either.
cubancigar11 said:
How to I flash stock? Does it work on locked bootloader? 'Enable USB Debugging' was never enabled either.
Click to expand...
Click to collapse
Yes you can flash with locked bootloader
For more tutorials & guide search XDA or YouTube
[INDEX] Moto E 2014 - ROMs, Kernels, MODs, GUIDES
https://forum.xda-developers.com/moto-e/general/index-motorola-moto-e-roms-kernels-t3200342
cubancigar11 said:
I was trying to update the Moto E 1st Gen with whatever official update was pending, and then I did a factory reset. Now my phone is stuck on the big M logo.
The bootloader is locked.
adb devices says 'unauthorized'. fastboot devices doesn't list anything. RSDLite doesn't detect it. What to do?
Click to expand...
Click to collapse
you first need to unlock the bootloader then you can resolve your problem
if you don't know how to unlock bootloader then ask..!
mklkumar4 said:
you first need to unlock the bootloader then you can resolve your problem
if you don't know how to unlock bootloader then ask..!
Click to expand...
Click to collapse
Indeed I would like to unlock the bootloader. How can I go about that in current state?
cubancigar11 said:
Indeed I would like to unlock the bootloader. How can I go about that in current state?
Click to expand...
Click to collapse
are you able to access fastboot mode?
---------- Post added at 03:35 PM ---------- Previous post was at 03:32 PM ----------
cubancigar11 said:
I was trying to update the Moto E 1st Gen with whatever official update was pending, and then I did a factory reset. Now my phone is stuck on the big M logo.
The bootloader is locked.
adb devices says 'unauthorized'. fastboot devices doesn't list anything. RSDLite doesn't detect it. What to do?
Click to expand...
Click to collapse
unauthorised means you need to give confirmation from your device to use ADB on PC
and you don't need to use ADB to unlock bootloader use fastboot, fastboot devices only list out when you are on fastboot mode
https://motorola-global-portal.custhelp.com/app/standalone%2Fbootloader%2Funlock-your-device-c
here's the procedure to unlock bootloader
mklkumar4 said:
are you able to access fastboot mode?
---------- Post added at 03:35 PM ---------- Previous post was at 03:32 PM ----------
unauthorised means you need to give confirmation from your device to use ADB on PC
and you don't need to use ADB to unlock bootloader use fastboot, fastboot devices only list out when you are on fastboot mode
https://motorola-global-portal.custhelp.com/app/standalone%2Fbootloader%2Funlock-your-device-c
here's the procedure to unlock bootloader
Click to expand...
Click to collapse
Thanks. Yes, fastboot was working. I ended up flashing without unlocking bootloader.
First I used this command
mfastboot.exe getvar all
Click to expand...
Click to collapse
to get the exact model and current (broken) rom version of the device.
Then I downloaded corresponding stock rom (RETAILDSDSALL_XT1022_4.4.4_KXC21.5-40_cid7_CFC.xml.zip) and followed the "[GUIDE] Restore Moto E Stock Firmware [UPDATED#2]" guide as provided by Mr. Rajendra Rasa above to flash the stock rom.
Thanks to both you. I also got the unlock code for future reference.
cubancigar11 said:
Thanks. Yes, fastboot was working. I ended up flashing without unlocking bootloader.
First I used this command
to get the exact model and current (broken) rom version of the device.
Then I downloaded corresponding stock rom (RETAILDSDSALL_XT1022_4.4.4_KXC21.5-40_cid7_CFC.xml.zip) and followed the "[GUIDE] Restore Moto E Stock Firmware [UPDATED#2]" guide as provided by Mr. Rajendra Rasa above to flash the stock rom.
Thanks to both you. I also got the unlock code for future reference.
Click to expand...
Click to collapse
Pleasure ?
By the way you should try custom roms so you'll get max out of the device ?
Moto E 1st gen fastboot
Thanks. It helped me so much. Thanks:laugh:
after fastboot oem relock I can boot just to TWRP, PWR+Vol- will boot only to TWRP, also if if press reboot to bootloader in TWRP it boots into TWRP.
tried to install update.zip but throws errors
what state am I in an any idea how to recover?
I just wanted to unroot/relock
Thanks for any advise
Phone was working, unlocked and still rooted ?
Then, you decided to boot to bootloader to send a 'fastboot oem relock' command then you rebooted ?
Now you stated bootloader is replaced with twrp ?
When trying to flash random update.zip throught twrp, it gives you error message.
What's the problem here ?
---------- Post added at 15:16 ---------- Previous post was at 15:14 ----------
xequtor said:
what state am I in an any idea how to recover ?
Click to expand...
Click to collapse
...
oslo83 said:
Phone was working, unlocked and still rooted ?
Then, you decided to boot to bootloader to send a 'fastboot oem relock' command then you rebooted ?
Now you stated bootloader is replaced with twrp ?
When trying to flash random update.zip throught twrp, it gives you error message.
What's the problem here ?
---------- Post added at 15:16 ---------- Previous post was at 15:14 ----------
...
Click to expand...
Click to collapse
yes, was working, unlocked and still rooted
also yes to 'fastboot oem relock'
bootloader was TWRP before
not flashing random update.zip, just the b120.
I don't think trying to flash stock update.zip through twrp will achieve anything...
oslo83 said:
I don't think trying to flash stock update.zip through twrp will achieve anything...
Click to expand...
Click to collapse
I just extracted what's in update.app, recovery.img, boot.img etc, any idea what do I can or must flush?
I suspect the bootloader is locked, is there a way to unlock it from within TWRP, same as with fastboot oem unlock xxxxxxx ?
I'll assume you meant bootloader was twrp AFTER you locked bootloader and was still bootloader before you locked it ?
By the way, before you locked you're bootloader, you were on which firmware and wich region ?
oslo83 said:
I'll assume you meant bootloader was twrp AFTER you locked bootloader and was still bootloader before you locked it ?
By the way, before you locked you're bootloader, you were on which firmware and wich region ?
Click to expand...
Click to collapse
yes, correct TWRP was before I locked and it is still now.
I was on B120 EU
Ok, from your C432B120 you could try to restore the dload way to stock C432B130 with this file :
http://androidhost.ru/v5
(instructions are inside the file, and you will need a formated exfat >8GB sdcard)
Source:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
oslo83 said:
Ok, from your C432B120 you could try to restore the dload way to stock C432B130 with this file :
http://androidhost.ru/v5
(instructions are inside the file, and you will need a formated exfat >8GB sdcard)
Source:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
Click to expand...
Click to collapse
update.app in /sdcard/dload/ folder
volume down+ volume up+ power button
just did that, nomather which key combination I press, TWRP will boot
I did try to flash recovery.img in TWRP and now I'm in this, no more TWRP but ERROR MODE
soo, I guess I reach the point of no return just send for repair? I'm still under warranty
after draining the battery overnight as turning off did not work, I'm back to TWRP, TWRP appeared "magically" again
now the question ist, what can I flush in TWRP to go in to fastboot/bootloader again?
update:
forced to reproduce the ERROR MODE (see previous photo) with flashing boot.img and recovery.img in TWRP and could unlock bootloader again with:
c:\adb>fastboot oem unlock xxxxxxxxxx
< waiting for any device >
--------------- hier I pressed Vol- plus PWR to force reboot after that fastboot unlocked and had on the phone the question if I want to unlock------------------
...
(bootloader) The device will reboot and do factory reset...
OKAY [ 20.001s]
finished. total time: 20.021s
now I have to figure out what to flash with fastboot, anyone have an idea?
update2:
drained the battery, rebooted Vol- + PWR
and I'm in fastboot now, stange stuff happens here
but same question, what to flash with fastboot to get it working again?
update 3:
extracted recovery.img and recovery2.img from B120 FW and flashed with fastboot
then B130 from https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
now everything works.
the important thing was to unlock bootloader, even if you get the ERROR MODE you still have fastboot ad can lock/unlock the bootloader, see post #13
Congratulations
Hello,
I can't enable the oem unlock from developer options, i understand that i have to do a factory reset. When i do it, it stuck at 0%, i let it all the day. If someone can help me please
kaoutar19 said:
Hello,
I can't enable the oem unlock from developer options, i understand that i have to do a factory reset. When i do it, it stuck at 0%, i let it all the day. If someone can help me please
Click to expand...
Click to collapse
Please, someone can help me ? i am bloqued
kaoutar19 said:
Please, someone can help me ? i am bloqued
Click to expand...
Click to collapse
Hallo there
Just a few questions first, are you trying to reset factory settings through the phone settings app or are you trying trough eRecovery?
Cheers,
AS
ars_chelsea said:
Hallo there
Just a few questions first, are you trying to reset factory settings through the phone settings app or are you trying trough eRecovery?
Cheers,
AS
Click to expand...
Click to collapse
Thank you. I tried to reset through the setting and through eRecovery, for both, the reset stuck at 0%. Bootloader is unlocked, FRP is locked. I can't toggle the button to enable OEM unlocking.
Are you using phone with working sim, or without? Why I ask about sim? If not working sim card, then a lot phones will not give OEM unlock option, once it was for me with Sony phone, after I inserted sim needet to wait weak and only then OEM unlock option was accessable.
What are your phone full model ? Like, ane-lx1c432b166
Arnys said:
Are you using phone with working sim, or without? Why I ask about sim? If not working sim card, then a lot phones will not give OEM unlock option, once it was for me with Sony phone, after I inserted sim needet to wait weak and only then OEM unlock option was accessable.
What are your phone full model ? Like, ane-lx1c432b166
Click to expand...
Click to collapse
No, when i inser the sim card, i can't activate the sim through the parameteres (Erreur activation), that's why i wanted to reset it and install new firmware.
kaoutar19 said:
No, when i inser the sim card, i can't activate the sim through the parameteres (Erreur activation), that's why i wanted to reset it and install new firmware.
Click to expand...
Click to collapse
ok, didnt give full ph0ne model, dont need, can go and find all you need yourself : from this : https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
7. dload package
In this site you can search for firmware by Huawei P20 Lite or directly by your device oem name (ANNE-L01, ANNE-L03, ANNE-L21, ANNE-L22, ANNE-L23, etc...
http://androidhost.ru/search.html
Download the firmware that match with your device and unzip.
Under folder Software you will found the folder dload, copy this folder to sdcard.
Under folder ReleaseDoc you will find a Software Upgrade Guideline.docx, read it.
User data will be wiped.
Update is done with stock recovery
If your Bootloader is currently unlocked at the end it will be changed to lock state.
i gues you have your bootloader code, you can even use older package, adn reset your phone using this dload method!!
Arnys said:
ok, didnt give full ph0ne model, dont need, can go and find all you need yourself : from this : https://forum.xda-developers.com/hu...om-official-emui-8-0-huawei-p20-lite-t3773999
7. dload package
In this site you can search for firmware by Huawei P20 Lite or directly by your device oem name (ANNE-L01, ANNE-L03, ANNE-L21, ANNE-L22, ANNE-L23, etc...
http://androidhost.ru/search.html
Download the firmware that match with your device and unzip.
Under folder Software you will found the folder dload, copy this folder to sdcard.
Under folder ReleaseDoc you will find a Software Upgrade Guideline.docx, read it.
User data will be wiped.
Update is done with stock recovery
If your Bootloader is currently unlocked at the end it will be changed to lock state.
i gues you have your bootloader code, you can even use older package, adn reset your phone using this dload method!!
Click to expand...
Click to collapse
Thank you for your answer, so i downloaded the latest version ANE-LX1 8.0.0.147(C109) Europe, copy the dload folder on sd card. Did a forced upgrade, the upgrade stuck at 5%
kaoutar19 said:
Thank you for your answer, so i downloaded the latest version ANE-LX1 8.0.0.147(C109) Europe, copy the dload folder on sd card. Did a forced upgrade, the upgrade stuck at 5%
Click to expand...
Click to collapse
Hi again
Sorry not answering earlier...But I do think Mr.Arnys is gonna take care of this. About the forced upgrade, try resetting the caches first.
Cheers,
AS
ars_chelsea said:
Hi again
Sorry not answering earlier...But I do think Mr.Arnys is gonna take care of this. About the forced upgrade, try resetting the caches first.
Cheers,
AS
Click to expand...
Click to collapse
I makes software installation failed i have custom rom Morfuz
kaoutar19 said:
I makes software installation failed i have custom rom Morfuz
Click to expand...
Click to collapse
Oh you have a custom ROM? So your bootloader is unlocked ok... In that case, install the stock recovery .img via fastboot(if you need a guide I can provide it) as soon as you can and then try to install the dload package again
Cheers,
AS
ars_chelsea said:
Oh you have a custom ROM? So your bootloader is unlocked ok... In that case, install the stock recovery .img via fastboot(if you need a guide I can provide it) as soon as you can and then try to install the dload package again
Cheers,
AS
Click to expand...
Click to collapse
Thanks for your replay . Where i can find the stock recovery .img ? The bootloader is unlocked, frp locked. I have to use the same method ? i put only the .img file on dload folder ? Thank you for your help
try to restore your phone using eRecovery, when restart phone, there are text your device unlocked cant trust, pres 3 sec volume upt o enter e recovery, enter in it, conect to wifi, download and instal stock..
Arnys said:
try to restore your phone using eRecovery, when restart phone, there are text your device unlocked cant trust, pres 3 sec volume upt o enter e recovery, enter in it, conect to wifi, download and instal stock..
Click to expand...
Click to collapse
I have getting package info failed
kaoutar19 said:
Thanks for your replay . Where i can find the stock recovery .img ? The bootloader is unlocked, frp locked. I have to use the same method ? i put only the .img file on dload folder ? Thank you for your help
Click to expand...
Click to collapse
Hallo again,
Ok so for the stock recovery you can download it on the thread by ciubi93, on this link https://mega.nz/#!SR9RzKST!dhXS0yC-p_SvWu-SYYLaop1aRFzSulLVrnSXCVVJiGI after you download this, download the fastboot adb tools - here's a link of the xda for that https://www.xda-developers.com/install-adb-windows-macos-linux/ after you did that guide from xda, copy the stock recovery into that folder and then press shift+right click of your mouse on the folder and select "open powershell window here (in case of windows 10) or in case of windows 7 (open command prompt window here)" , if you have a power shell window then power off your device then press power ON + volume down and type on the window ".\fastboot flash recovery recovery_ramdisk.img ", after this you have your stock recovery successfully reset and you can now flash the official dload package, try it via power ON + Volume down + Volume up at the same time until the huawei logo disappears and then you release.
I really hope this helps cause I tried this a lot on mine.
Cheers,
AS
error remote Command not allowed
Hello, i tried this command in the fastboot mode, i have the error remote Command not allowed.
kaoutar19 said:
Hello, i tried this command in the fastboot mode, i have the error remote Command not allowed.
Click to expand...
Click to collapse
Hi there
Yeah I forgot you have FRP locked....My bad....Anyway, can you tell me the current build you have and the one you want to install? Example: C17 8.0.0.140
Because if you try to install a different firmware which is not from your country you need to change your oem info first.
Cheers,
AS
---------- Post added at 10:47 ---------- Previous post was at 10:36 ----------
Also if you had it unlocked I assume you have the unlock code with you, in that case try this first:
Relock the bootloader using fastboot command "fastboot oem relock *codehere* " this will erase all DATA, it will do an hard reset, be sure to backup first!
After that, you can unlock the bootloader again via fastboot command "fastboot oem unlock *codehere*" and then it will unlock both bootloader and FRP
Cheers,
AS
ars_chelsea said:
Hi there
Yeah I forgot you have FRP locked....My bad....Anyway, can you tell me the current build you have and the one you want to install? Example: C17 8.0.0.140
Because if you try to install a different firmware which is not from your country you need to change your oem info first.
Cheers,
AS
---------- Post added at 10:47 ---------- Previous post was at 10:36 ----------
Also if you had it unlocked I assume you have the unlock code with you, in that case try this first:
Relock the bootloader using fastboot command "fastboot oem relock *codehere* " this will erase all DATA, it will do an hard reset, be sure to backup first!
After that, you can unlock the bootloader again via fastboot command "fastboot oem unlock *codehere*" and then it will unlock both bootloader and FRP
Cheers,
AS
Click to expand...
Click to collapse
Hm, if I'm correct, you can't unlock bootloader, if frp are locked, frp will be unlocked, when you allow OEM unlock under developer options.
Only thing there can do, connect with mofuz ROM developer to help return to stock, otherwise our suggestions will not work, because all I know is for stock emui.
But yeah, with right phone build number he shulda be able to return to stock with no problem, so, does he know what was stock emui build he had before started to play with phone..??!!
And, can download all dload packages and try them all, no harm if it fails, but maybe some will reflash system as it should be
Arnys said:
Hm, if I'm correct, you can't unlock bootloader, if frp are locked, frp will be unlocked, when you allow OEM unlock under developer options.
Only thing there can do, connect with mofuz ROM developer to help return to stock, otherwise our suggestions will not work, because all I know is for stock emui.
But yeah, with right phone build number he shulda be able to return to stock with no problem, so, does he know what was stock emui build he had before started to play with phone..??!!
And, can download all dload packages and try them all, no harm if it fails, but maybe some will reflash system as it should be
Click to expand...
Click to collapse
You can't unlock FRP when you have the booloader unlocked yes I know, but what I said is for him to relock first and then unlock it again Once he unlocks again the FRP will become unlocked, I looked into this thread for that and they also confirmed it works here's the proof if you have doughts quoting @clsA "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options":
Here's the thread (check @gopinaidu77 post and then the answers after that):
https://forum.xda-developers.com/honor-5x/help/remove-frp-lock-fastboot-t3530220/page2
Cheers,
AS
ars_chelsea said:
You can't unlock FRP when you have the booloader unlocked yes I know, but what I said is for him to relock first and then unlock it again Once he unlocks again the FRP will become unlocked, I looked into this thread for that and they also confirmed it works here's the proof if you have doughts quoting @clsA "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options":
Here's the thread (check @gopinaidu77 post and then the answers after that):
https://forum.xda-developers.com/honor-5x/help/remove-frp-lock-fastboot-t3530220/page2
Cheers,
AS
Click to expand...
Click to collapse
I locked and relocked the bootloader, now i can only access to the recovery or to the fastboot. In the recovery, anything i do like reset, my phone reboot again to the recovery, in the fastboot mode i can't relock the bootloader, need to access to the phone to enable developer options. I tried to do a hard reset or an update with dload, nothing work, always rebooting to the recovery. My phone is broken now
Here is a patched MSM download tool for TMobile OP7T Pro 5G McLaren.
It will bypass the need to sim unlock before unlocking the bootloader, and will also bypass the need of an unlock token file from OnePlus (hence skip the wait period of 1 week to get the privilege to unlock). It will NOT sim unlock the phone.
1) Download the patched MSM download tool: http://www.mediafire.com/file/6r6vn...04+patched+for+easy+bootloader+unlock.7z/file
EDIT: 10.0.39 version: http://www.mediafire.com/file/vdphi4ncs9alxv6/hotdogg_13_A.01_200915_patched_10.0.39.7z/file
2) Run the tool, select "other" in "Login type", click Next, connect your phone in EDL mode, ensure the "sha256 check" is NOT checked, select "TMO" in the Target dropdown, click the Start button and wait until it's completed.
3) The phone will show a red warning saying "device is corrupt", just ignore that and wait some time. It will fallback in fastboot because it's not able to boot. Update your fastboot executable, otherwise fastboot might not recognise the following command. Download it here: https://dl.google.com/android/repository/platform-tools-latest-windows.zip. Now run the following fastboot command, and follow the instructions on the screen of the phone:
Code:
fastboot flashing unlock_critical
4) Bootloader is now unlocked.
5) If you want to be able to boot, you'll probably need to flash again the boot.img of the rom. Download it here: http://www.mediafire.com/file/37rl13s60rsqy5m/boot.img/file
EDIT: 10.0.39 boot.img : http://www.mediafire.com/file/tt6c58u519d8ktc/boot.img_10.0.39.7z/file
And run the command:
Code:
fastboot flash boot boot.img
6) Run "fastboot reboot".
Thread re opened by moderators.
The placeholder for the link has now been replaced by the actual link to download the tool.
Could you use this tool to flash mclaren 7t pro Global to tmo version? Even if it means giving up 5g?
So with this you would not need to contact TMobile to permanent unlock and the OEM unlock the phone? And you would also not need to get the unlock code from OnePlus for the bootloader?
inneyeseakay said:
Could you use this tool to flash mclaren 7t pro Global to tmo version? Even if it means giving up 5g?
Click to expand...
Click to collapse
It doesn't work like that.
And this thread is not about converting the phone to international.
t436h05t said:
So with this you would not need to contact TMobile to permanent unlock and the OEM unlock the phone? And you would also not need to get the unlock code from OnePlus for the bootloader?
Click to expand...
Click to collapse
Yes and yes, that is explained in the first post.
Superboy58 said:
Yes and yes, that is explained in the first post.
Click to expand...
Click to collapse
when I open the tool is asking for account and password. how do I get that information?
noobiedev83 said:
when I open the tool is asking for account and password. how do I get that information?
Click to expand...
Click to collapse
Just click on Login type and select "Other" in the dropdown.
The tool will open without credentials.
Superboy58 said:
Just click on Login type and select "Other" in the dropdown.
The tool will open without credentials.
Click to expand...
Click to collapse
ok so I did it but im stuck in fastboot and the phone wont reboot to the os, any ideas?
---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------
in fastboot mode under bootloader version I dont have anything in there and on Baseband either is blank. is that normal?
noobiedev83 said:
ok so I did it but im stuck in fastboot and the phone wont reboot to the os, any ideas?
---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------
in fastboot mode under bootloader version I dont have anything in there and on Baseband either is blank. is that normal?
Click to expand...
Click to collapse
Install a ROM to be able to boot
Superboy58 said:
Install a ROM to be able to boot
Click to expand...
Click to collapse
how can you please help that im stuck in Fastboot
noobiedev83 said:
how can you please help that im stuck in Fastboot
Click to expand...
Click to collapse
If you don't know how to install a ROM you should not be using this tool.
Go in this forum section and read the posts, choose one of the available ROMs and install it.
https://forum.xda-developers.com/7t-pro-mclaren/development
Superboy58 said:
If you don't know how to install a ROM you should not be using this tool.
Go in this forum section and read the posts, choose one of the available ROMs and install it.
https://forum.xda-developers.com/7t-pro-mclaren/development
Click to expand...
Click to collapse
you never mention that you have to install a rom I tought I was going to unlock the phone but my os was going to stay ok!
you should post that in the thread because I didnt want to install any third party roms
Ok, I understand what happened.
I talked with the person who proposed to test the tool, @omariscal1019 , and we think you can't boot because you were for example on the rom 10.0.30 but you flashed this MSM which is based on 10.0.36 rom.
You might need to flash back only the boot.img of the 10.0.30 ROM.
I will extract boot and recovery partitions of each rom versions and post them on the first post of this thread.
Now that you are unlocked you only need to run
"fastboot flash boot boot.img" (not exactly sure of the syntax but it's close)
That will flash your boot partition
Superboy58 said:
Ok, I understand what happened.
I talked with the person who proposed to test the tool, @omariscal1019 , and we think you can't boot because you were for example on the rom 10.0.30 but you flashed this MSM which is based on 10.0.36 rom.
You might need to flash back only the boot.img of the 10.0.30 ROM.
I will extract boot and recovery partitions of each rom versions and post them on the first post of this thread.
Now that you are unlocked you only need to run
"fastboot flash boot boot.img" (not exactly sure of the syntax but it's close)
That will flash your boot partition
Click to expand...
Click to collapse
I was in the latest software update that tmobile release 2 days ago
Try this flash msm .36 the original one, then let it boot skip everything to home screen then msm the patched one then u can go from there it should work
omariscal1019 said:
Try this flash msm .36 the original one, then let it boot skip everything to home screen then msm the patched one then u can go from there it should work
Click to expand...
Click to collapse
Good suggestion, i think it should work.
If you're still stuck in fastboot, try the "fastboot continue" command.
Please share the results,
Thanks
Superboy58 said:
Good suggestion, i think it should work.
If you're still stuck in fastboot, try the "fastboot continue" command.
Please share the results,
Thanks
Click to expand...
Click to collapse
tested all the suggestions and no go, still get stuck in fastboot mode after trying to unlock bootloader with this tool.
noobiedev83 said:
tested all the suggestions and no go, still get stuck in fastboot mode after trying to unlock bootloader with this tool.
Click to expand...
Click to collapse
You say "after trying to unlock bootloader" which suggest the bootloader unlock failed ?
Does the fastboot mode shows unlocked bootloader ? If it's locked, that's normal that the phone is stuck in fastboot.
Have you tried to flash the original T-Mobile 10.0.36 MSM, then the patched 10.0.36 MSM?
Superboy58 said:
You say "after trying to unlock bootloader" which suggest the bootloader unlock failed ?
Does the fastboot mode shows unlocked bootloader ? If it's locked, that's normal that the phone is stuck in fastboot.
Have you tried to flash the original T-Mobile 10.0.36 MSM, then the patched 10.0.36 MSM?
Click to expand...
Click to collapse
well it shows that is unlock in the fastboot menu but it wont reboot to the os, is stuck in the fastboot mode and I already reflash the newest 10.0.36 msm and I try to patch again but no go.