Help me fix my phone!(zuk z2) - Android Q&A, Help & Troubleshooting

I have a lenovo ZUK Z2 plus and i tried to flash with twrp an another twrp version(newer) ...after the restart phone stack at options menu and the only thing i can do is to boot in fastboot...when i hit the "recovery" option phone restarts in options menu... if i boot regularly phone stack at logo screen of ZUK and does not boot up, just stack there forever.
Options that ti have done and nothing:
i downloaded platform tools(adb,fastboot etc...) and i flashed twrp recovery img again with these commands "fastboot flash recovery xxx.img" and when i booted to recovery nothing happened, again at options menu or fastboot mode.. anywhere else..
can you help me please ? i am begging you.

Hi check this maybe can help U :
https://www.youtube.com/watch?v=-weHVxO5HiE
In order to instal qfil driver just hold Vol + and Power button and plug your USB .
Good Luck

Related

No Fastboot more possible

Hi I need help.
After Flashin a new ROM it was not be possible to get in the fastboot mode. Pressing down the Power button and the Vol Down button start first the recovery mode than i see for a sec a CWM Screen an than the screen is black and nothing happend.
And as addon the device not boot. Sometimes i get a reboot
Any ideas how I can fix that? Is there a more low level solution?
Thanks,
alexander555 said:
Hi I need help.
After Flashin a new ROM it was not be possible to get in the fastboot mode. Pressing down the Power button and the Vol Down button start first the recovery mode than i see for a sec a CWM Screen an than the screen is black and nothing happend.
And as addon the device not boot
Any ideas how I can fix that? Is there a more low level solution?
Thanks,
Click to expand...
Click to collapse
OK, with testing I found a solution for the problem
Here the steps what i've done:
1. Load the Flyer with the power supply unit.
2. From PC Commandpromt. Start fastboot flash recovery recovery.img. I've get the message "waiting for devices". I've used a old CWM 4 reciovery Image
3. Now connect the Flyer and Start with "Power + Down". Here was the surprise that now the Bootloop stops and i see now the Boot Menu. So I change here to fastboot and flash the recovery Image new.
4 Rebbot now an voila bo boot more and I can use the normal cwm recovery mechanism to recovery one of my old images... Perfekt

Stuck in Boot to ffbm in ZUK 2 Plus

My Zuk 2 plus is running oxygen os and twrp recovery. I rebooted the phone into boot to ffbm mode and now I'm stuck. Tried advanced wipe on the phone from twrp recovery and again flashing the custom rom but again the phone is displaying the same test screen after reboot. I also tried pressing different key combinations like pressing the both volume keys and power key together till the second vibration but nothing works. Tried connecting to add Fastboot but it could not detect the device. Kindly help me with the same.

Can't boot in fastboot mode

Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
power off the phone, put USB port in phone, press volume down key, now connect USB port to PC with volume down key press. it should boot to fastboot.
Rob1hn said:
Hi,
I tried to flash lineageos 16 on my bkl09 emui9.
It was working but it was impossible to install app by play store... I tried many times to re-flash lineage img.
I'm actually blocked on TWRP. But it doesn't launch. When i start my phone, it boots on twrp, and the phone stays on the twrp boot screen but doesn't launch.
I can't turn the phone into fastboot mod by pressing vol- and power . It just restarts and reboot recovery twrp and block on boot screen twrp without launching...
I plug my phone on my computer, it reconized as adb devices but when I try to turn into fastboot mode by adb, nothing happen...
I hope there's a solution !
(and sorry for my english ... :/
Click to expand...
Click to collapse
Try this command
Code:
adb reboot fastboot
miststudent2011 said:
Try this command
Code:
adb reboot fastboot
Click to expand...
Click to collapse
hi. Please, help, i cant reboot to fsstboot. If i do this from app or from adb my phone just reboots twice. I can boot into recovery and into download mode
Don't reboot into fastboot, boot into fastboot.
1st hold the up and down and power to start up so that it shows more than that "...is now booting". Then power off and press "down" and "power" with USB plugged to enter fastbboot. In fastbbot, flash the userdata.img and the cache.img (This cleans data and cache totally) from Huawei's updates, then you will be able to get into TWRP without being stucked.

How do i fix my lgv30?

help. after following this guide (Download Pixel Experience ROM on LG V30 with Android 9.0 Pie | from getdroidtips) my lgv30 is stuck un boot screen and won't do anything. i tried every combination of buttons but it only reboot always like that. i can't turn it off and i can't even reach recovery mode. from the guide i read: i installed the zip file from twrp and when it said "complete", the phone froze a bit and then it got stuck where i am. pls any help?
1-press the power button and volume down button when your phone is stuck on lg logo.
2-When its shut down, Plug the data caple in phone and press the volume down button hurry bcz the phone reboots very fast this will get u into fastboot mode.
3- Then type "fastboot boot (whatever your twrp img names). Then u will boot into twrp. Then flash a flashable zip firmware?

Need Help - Poco F1 Android 12 Stuck in Recovery

I flashed an unofficial Evolution X v6.5 Rom For my Poco F1 today,
it was working fine but then I tried to Reboot into MY Custom Recovery( OrangeFox ) using the Advance Restart Option Exist in Rom.
OrangeFox Recovery Opening Image was Showing but it didn't opened, My phone shut down and rebooted again into the Same OrangeFox Opening Image and then shut down again.
It stuck into Recovery Opening Bootloop.
I tried holding the power button to reboot into system but noting is happening, It is showing same Recovery Opening Image and then shutting down,
I tried holding the power button + Volume UP Button, Same thing was happening Recovery Opening Image and then shutting down.
Luckily when I tried holding the power button + Volume down Button, It opened the bootloader.
So I thought Something happened to the OrangeFox recovery file So I installed the TWRP Recovery with My PC.
BUT Now It showing TWRP Opening Image and then shutting down. Same Recovery Bootloop.
Something( Maybe the Rom ) preventing me from rebooting into any recovery.
I should mention that I didn't installed any new app or anything, I just flashed the rom and then finished the Google setup.
I managed to shut down the phone by holding all 3 button for about 20sec.
But it's not charging anymore, if I plug the to phone to charger it start the whole Recovery Bootloop again.
Please Let me know if you know of any possible solutions.
I managed to fix that issue, In Future if anyone else got same problem in any phone, Then Follow this,
At First Hold all three button for about 25sec to shut down your phone,
at this situation your phone won't charge, if your battery completely drained then your phone might get hard brick, so shut down it at first.
Then download a stable & trustable rom and put that in SD Card or Pendrive( in this case you will be needed an OTG to plug the perdrive into your phone )
Then download the latest TWRP or any other Recovery in your PC. You really need the latest custom Recovery( 0 - 3 Months Old ).
I should let you know, You need to install ADB & Fastboot Drivers on your PC to perform any normal rooting process on your phone, And Download "Android Platform Tools".
Open CMD in "Android Platform Tools" Folder
Connect your phone to your PC in bootloader mode by holding down Power + Volume Down Button.
Then Type in CMD - fastboot devices
To check your device is properly connected or not. If your phone is connected properly then CMD will show a random number and fastboot. If not then connect the phone properly and check the driver.
Then Type - fastboot erase userdata
It will erase all your internal and data.
Then Type - fastboot flash recovery "PUT HERE THE LATEST CUSTOM RECOVERY FULL PATH"
It will flash the custom recovery, IN above command after writing recovery give a space then write the full path or hold and drag the latest custom recovery to command prompt, it will automatically write the full path for you.
After flashing the recovery now you can open the recovery.
Now Open the custom recovery immediately by holding down Power + Volume UP Button.
Then Wipe the Old Rom and flash the new downloaded rom from SD Card or Pendrive.
AND there you go, Now you can reboot into your new system or recovery.

Categories

Resources