This is my first ROM for this device, the plan is to modify the stock ROM like I did with my ROM for the TAB 3.
ChangeLog:
UPDATED ON 5/2/18
-changed notification layout
UPDATED ON 4/22/18
-added screenshot to power menu
-added 5 way reboot to power menu
UPDATED ON 4/17/18
-enabled app ops
-added system app remover (venkat) to developer settings
-added boot on/off sounds
-changed bootanimation
-updated busybox
*More mods coming soon!*
Download(s):
-Full ROM- (flash with TWRP)
https://drive.google.com/open?id=1tsnPB1RqxLhIbg6-JRVrrSfSBUQau9eN
-TWRP2.8.7.0- (built by Blazer64)
[Flash with Odin]
https://drive.google.com/open?id=1Y8lK-LOKqBBDt4MXqFikLvb98uAZlBbK
[Flash with Flashify or dd command mmcblk0p17]
https://drive.google.com/open?id=1cs4fdQXy9AamwYxSmbljY-hROHmFhd7j
Hey RealWelder,
thanks so much for working on this device, I coudn't believe when I saw someone was posting about it so recently. I am still desperately searching for a SM-G360P ROM without carrier lock. Could you tell me which Stock-Rom (Boost/Sprint/Virgin etc.) this ROM is based on? Do you think it's possible to deactivate the carrier lock in a ROM at all?
Also: Have you found any custom roms for the 360P or tweaked some to work on the device?
I installed your modded ROM and really like the modifications you did. Great job! Now, if the phone would accept my SIM-Card instead of showing "Invalid SIM", I'd be totally satisfied
Thanks again & keep up the good work!
jaytheman said:
Hey RealWelder,
thanks so much for working on this device, I coudn't believe when I saw someone was posting about it so recently. I am still desperately searching for a SM-G360P ROM without carrier lock. Could you tell me which Stock-Rom (Boost/Sprint/Virgin etc.) this ROM is based on? Do you think it's possible to deactivate the carrier lock in a ROM at all?
Also: Have you found any custom roms for the 360P or tweaked some to work on the device?
I installed your modded ROM and really like the modifications you did. Great job! Now, if the phone would accept my SIM-Card instead of showing "Invalid SIM", I'd be totally satisfied
Thanks again & keep up the good work!
Click to expand...
Click to collapse
I'm not too sure about the carrier lock, I would think with a SIM it would work on any GSM network, but that's not always the case. This is the Boost Variant and the firmware is the latest, G360PVPS2APE2.
So far I've not found anything other than modified stock ROMs for the device, but we have everything we need besides someone who can actually build it from source. At one time Blazer64 had CM11 on his Core Prime, (his was s820l through Straight Talk) but I think the project was abandoned. I can modify, but building from source isn't even possible with my current dinosaur of a PC. Lol
Sent from my SM-G360P using Tapatalk
RealWelder said:
I'm not too sure about the carrier lock, I would think with a SIM it would work on any GSM network, but that's not always the case. This is the Boost Variant and the firmware is the latest, G360PVPS2APE2.
So far I've not found anything other than modified stock ROMs for the device, but we have everything we need besides someone who can actually build it from source. At one time Blazer64 had CM11 on his Core Prime, (his was s820l through Straight Talk) but I think the project was abandoned. I can modify, but building from source isn't even possible with my current dinosaur of a PC. Lol
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
I'm not 100% sure my SIM-card isn't detected because of a carrier-lock. I brought the phone from the US and now use it in Germany, so that may be why...
Having Lineage on my SM-G360P would be a dream, maybe some day a dev feels up to the task. I'd even invest some money, if somebody was willing. It's not even because I particularly love the phone (I actually have a working Huawei phone), but simply because I don't feel like throwing it away. Damn all these manufacturers for abandoning their models so shortly after release.
Do you perhaps know how one would get into ROM-building and Modding? Are there any decent resources you know of?
jaytheman said:
I'm not 100% sure my SIM-card isn't detected because of a carrier-lock. I brought the phone from the US and now use it in Germany, so that may be why...
Having Lineage on my SM-G360P would be a dream, maybe some day a dev feels up to the task. I'd even invest some money, if somebody was willing. It's not even because I particularly love the phone (I actually have a working Huawei phone), but simply because I don't feel like throwing it away. Damn all these manufacturers for abandoning their models so shortly after release.
Do you perhaps know how one would get into ROM-building and Modding? Are there any decent resources you know of?
Click to expand...
Click to collapse
Shoot me a PM and when I have time I'll give you the tools I use and point you in the right direction.
Sent from my SM-G360P using Tapatalk
Holy Moly!
Holy moly! I can't believe that people still remember this phone! Haha! I have the same phone with my own Modified Stock Rom. Would you guys like to take a look? More so, I would like to ask you that how did you get the RealWelder Rom Controls?? :laugh: :good:
---------- Post added at 03:50 PM ---------- Previous post was at 02:55 PM ----------
GrapeJuice123 said:
Holy moly! I can't believe that people still remember this phone! Haha! I have the same phone with my own Modified Stock Rom. Would you guys like to take a look? More so, I would like to ask you that how did you get the RealWelder Rom Controls?? :laugh: :good:
Click to expand...
Click to collapse
Just realized that you made it yourself (RealWelder ROM Controls) , awwesome man! Is it possible that I can do something like that on my phone?
GrapeJuice123 said:
Holy moly! I can't believe that people still remember this phone! Haha! I have the same phone with my own Modified Stock Rom. Would you guys like to take a look? More so, I would like to ask you that how did you get the RealWelder Rom Controls?? [emoji23] :good:
---------- Post added at 03:50 PM ---------- Previous post was at 02:55 PM ----------
Just realized that you made it yourself (RealWelder ROM Controls) , awwesome man! Is it possible that I can do something like that on my phone?
Click to expand...
Click to collapse
Yes, check out @tdunham Unified TouchWiz Guides and Mods thread. There you will find (near the bottom of the 1st page) a link to Custom Settings by @ficeto. You can download it and use it instead of ROM Control (which is for 5.0+) to use the mods. Also @venkat kamesh has a signing tool that I used to resign the Custom Settings app after I modified it.
Sent from my SM-G360P using Tapatalk
RealWelder said:
Yes, check out @tdunham Unified TouchWiz Guides and Mods thread. There you will find (near the bottom of the 1st page) a link to Custom Settings by @ficeto. You can download it and use it instead of ROM Control (which is for 5.0+) to use the mods. Also @venkat kamesh has a signing tool that I used to resign the Custom Settings app after I modified it.
Click to expand...
Click to collapse
Alrighty, I looked through the list (holy cow that's crap ton of customization, suck on that Apple!) And I couldn't find where I could make my phone's notification area look more modern, just like you have on your modified ROM. Do you know where can I find that? Thanks!
GrapeJuice123 said:
Alrighty, I looked through the list (holy cow that's crap ton of customization, suck on that Apple!) And I couldn't find where I could make my phone's notification area look more modern, just like you have on your modified ROM. Do you know where can I find that? Thanks!
Click to expand...
Click to collapse
I did that on my own, you can decompile my SystemUI_ESS.apk with apktool and check it out. Most of the changes are in Notification_Header.xml, Status_Bar.xml, and Status_Bar_Expanded.xml as well as /values/Colors.xml and /values/Drawables.xml.
Make sure you search through all of the various values folders because there are different Colors.xml and Drawables.xml for each screen size. Same with /layout which is where the other 3 files are. (mdpi, hdpi, etc.)
Sent from my SM-G360P using Tapatalk
Excellent work with this rom. I was finally able to get xposed working on this phone after flashing your rom. And the twrp for this rom works great. I like the bootanimation you made, I tried to change it and was unable to. Any suggestions? I tried putting bak at the end of every file and even added my zip to the folder with no avail. Help me please @RealWelder And one last thing, I get this annoying pop-up that my software has been updated every time the phone boots and I can't get rid of it. The xposed apps notify clean and receiver stop are useless for it. I tried disabling system software update apps with root uninstaller pro and still nothing.
elwhiteboy01 said:
Excellent work with this rom. I was finally able to get xposed working on this phone after flashing your rom. And the twrp for this rom works great. I like the bootanimation you made, I tried to change it and was unable to. Any suggestions? I tried putting bak at the end of every file and even added my zip to the folder with no avail. Help me please @RealWelder And one last thing, I get this annoying pop-up that my software has been updated every time the phone boots and I can't get rid of it. The xposed apps notify clean and receiver stop are useless for it. I tried disabling system software update apps with root uninstaller pro and still nothing.
Click to expand...
Click to collapse
The bootanimation should be pretty easy, just replace bootanimation.zip in /system/media/ with you own. (Or use an app like JRummy's Bootanimation app.) I'm not sure what's up with the update, unless Boost finally did one. I don't have a SIM or service on mine so I would be unable to get it currently. I'll see what I can figure out, though.
Sent from my SM-G360P using Tapatalk
RealWelder said:
The bootanimation should be pretty easy, just replace bootanimation.zip in /system/media/ with you own. (Or use an app like JRummy's Bootanimation app.) I'm not sure what's up with the update, unless Boost finally did one. I don't have a SIM or service on mine so I would be unable to get it currently. I'll see what I can figure out, though.
Click to expand...
Click to collapse
I did put my zip in system/media and even put bak at the end of every boot file. Before that I tried the Samsung boot animation app and it didn't work. Hence the reason why I tried other options. I'm going to try.again one last time. I'll let you know if I have any progress. And thanks for your response and also great rom.
elwhiteboy01 said:
I did put my zip in system/media and even put bak at the end of every boot file. Before that I tried the Samsung boot animation app and it didn't work. Hence the reason why I tried other options. I'm going to try.again one last time. I'll let you know if I have any progress. And thanks for your response and also great rom.
Click to expand...
Click to collapse
Hey just don't worry about the boot animation. Once I got Xposed and all the Xposed apps up and running, I did a backup. Good thing too, messing with the boot animations made the phone to work real slow. I said to hell with it and just did a restore in twrp. As much as I would want this phone to boot like my Samsung tab 4 with the Stargate animation, it doesn't seem worth the effort. So don't trouble yourself messing with it @RealWelder. I appreciate what you did with this rom. Changing the architecture to an arm7 I believe. Well anyways, Xposed accepts it now. I can't thank you enough!
Hey, I have been trying to figure out how to edit my ROM on my computer, and I can't seem to do it? Can you help me out or at least give me tips?
GrapeJuice123 said:
Hey, I have been trying to figure out how to edit my ROM on my computer, and I can't seem to do it? Can you help me out or at least give me tips?
Click to expand...
Click to collapse
You're gonna need some tools. Apktool.jar or other program which uses apktool to decompile and recompile apks. It's also a good idea to keep newer and older versions of smali and baksmali.jar(s) because smali code has changed a bit and sometimes you have to baksmali with an older version and then smali with the newer version to convert code. Next you'll want to go check out TDunham's Ultimate TouchWiz guides and mods thread. There you will find all of the tutorials and mods.
Sent from my SM-G360P using Tapatalk
RealWelder said:
You're gonna need some tools. Apktool.jar or other program which uses apktool to decompile and recompile apks. It's also a good idea to keep newer and older versions of smali and baksmali.jar(s) because smali code has changed a bit and sometimes you have to baksmali with an older version and then smali with the newer version to convert code. Next you'll want to go check out TDunham's Ultimate TouchWiz guides and mods thread. There you will find all of the tutorials and mods.
Click to expand...
Click to collapse
Sweet! Can you link me the Apktool.jar? Sorry I have never edited ROMs before. Thanks!
---------- Post added at 09:25 PM ---------- Previous post was at 09:25 PM ----------
GrapeJuice123 said:
Sweet! Can you link me the Apktool.jar? Sorry I have never edited ROMs before. Thanks!
Click to expand...
Click to collapse
..well I have but with Gravity Box if that counts! Haha
GrapeJuice123 said:
Sweet! Can you link me the Apktool.jar? Sorry I have never edited ROMs before. Thanks!
---------- Post added at 09:25 PM ---------- Previous post was at 09:25 PM ----------
..well I have but with Gravity Box if that counts! Haha
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
Sent from my SM-G360P using Tapatalk
RealWelder said:
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
Sent from my SM-G360P using Tapatalk
Click to expand...
Click to collapse
Ok, I have installed the zip that you gave me. Am I supposed to use the TWRP Backup that I have to edit the ROM?
---------- Post added at 08:59 PM ---------- Previous post was at 08:43 PM ----------
GrapeJuice123 said:
Ok, I have installed the zip that you gave me. Am I supposed to use the TWRP Backup that I have to edit the ROM?
Click to expand...
Click to collapse
Should I follow this link? Or is there an easier way to mod the ROM? https://forum.xda-developers.com/showthread.php?t=2195858
Thanks!
GrapeJuice123 said:
Ok, I have installed the zip that you gave me. Am I supposed to use the TWRP Backup that I have to edit the ROM?
---------- Post added at 08:59 PM ---------- Previous post was at 08:43 PM ----------
Should I follow this link? Or is there an easier way to mod the ROM? https://forum.xda-developers.com/showthread.php?t=2195858
Thanks!
Click to expand...
Click to collapse
You don't install that zip just extract it into a folder on your computer and then find a thread that explains how to use it. My instructions will help some, but it was written for a different device so the frameworks that you install be different.
Sent from my SM-G360P using Tapatalk
Hey man, I was just wondering. Can I install a custom ROM from a different phone? Like Sm-g360h? I don't care if I can make phone calls as long as the ROM works? You think it will boot loop or even worse, brick my phone?
Edit: if anything happens to my phone, I will NOT hold anyone responsible besides me. Don't worry lol
Related
Thanks to ktoonzes, his flash-aholics tool and Kaffee4Eck for his ROM... I present to you...
Kaffee4Eck's Monsta CM9MIUI
ORIGINAL THREAD http://forum.xda-developers.com/showthread.php?t=1757876
ROM-Info:
- Based on Android 4.0.4 CM9 Latest Nightly / MIUI 2.7.6
- MIUI Launcher
- CRT-OF
- APN for almost all networks
- 3G/Data/Phone/Bluetooth/GPS/Audio/Everything
- ADFREE Hosts File to block Spam/Advertisements
- USB File Explorer
- WIFI Tethering and USB Tethering
- Inbuilt Root Permissions App
- Fluxi Kernel 7-17
- 3 Way Reboot (Hold Power Button)
- Multilanguage (I know some Apps are still not translated into all languages but coming soon in v2)
Kown Bugs:
- Need time to boot (CM9 some Probleme?/Bug?)
- No more known.
Download:
K4E_MONSTA_05
K4E_MONSTA_02
---> ThemeFix<---
( I don't think theme fix is needed in v5)
Credits to:
chillzz (For inspiration and some Files.)
Cyanogenmod (For CM9 Versions)
Xiaomi (For MIUI Versions and frustrated, confused times)
Kaffee4Eck and his My family
---> Follow Kafee4Eck on Twitter for all News and coming Updates/Versions. <---
As always please thank and donate to all the devs that make this possible... I don't ask for donations just hit the thanks button if you like the ROM
Sounds good but can you tell me the difference between this one and cmiui? Are you keeping both updated?
---------- Post added at 10:11 PM ---------- Previous post was at 09:34 PM ----------
Tried loading this. Got the Status 7 error. I see all the build props say GT-I9100. you may want to fix that. Im on CM9. Ill try again after the fix.
REOGrand said:
Sounds good but can you tell me the difference between this one and cmiui? Are you keeping both updated?
---------- Post added at 10:11 PM ---------- Previous post was at 09:34 PM ----------
Tried loading this. Got the Status 7 error. I see all the build props say GT-I9100. you may want to fix that. Im on CM9. Ill try again after the fix.
Click to expand...
Click to collapse
just flash a ROM like shostock that well change you're build.prop to an i9100. Or modify the build.prop.of the ROM you're flashing then flash it. I believe you can prevent it from checking.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Ok Ill give it a shot. I already have Sho on my puter so that will be easy enough.
downloading!
Hello,
May I know the difference between this and cMIUI?
REOGrand said:
Sounds good but can you tell me the difference between this one and cmiui? Are you keeping both updated?
---------- Post added at 10:11 PM ---------- Previous post was at 09:34 PM ----------
Tried loading this. Got the Status 7 error. I see all the build props say GT-I9100. you may want to fix that. Im on CM9. Ill try again after the fix.
Click to expand...
Click to collapse
Please reinstall Kernel or use an other Kernel. Status 7 Error comes most of the times from a bricked CWM. Dont worry this cant brick ur Phone completly. ^^
---------- Post added at 01:20 PM ---------- Previous post was at 01:18 PM ----------
bb_hershey said:
Hello,
May I know the difference between this and cMIUI?
Click to expand...
Click to collapse
Difference is updated MIUI and always latest CM9 nightly. cMIUI do a great job.
I only started it to get more performance, stability and smoothness. I do my best to fix all problems. ^^
Nice work, I'm surely gonna try .
Status 7 error has nothing to do with kernel.
updater script is looking at build.prop for model #.
edit updater script check for build ID.
Something like that. Google it.
MotoMudder77 said:
Status 7 error has nothing to do with kernel.
updater script is looking at build.prop for model #.
edit updater script check for build ID.
Something like that. Google it.
Click to expand...
Click to collapse
^^^ this. You can either do what Moto suggests, or if you're not technologically inclined, just flash any Rom based on an 9100 firmware like shostock 2 (now version 3) and then wipe and flash this. It'll update your build.prop to show i9100.
Sent from my SGH-I777 using Tapatalk 2
Well mickymauz is obviously a fan of CM/MIUI's
Btw, you're totally not updating this. You have version 2, Kaffee is now on version 5.
VanillaCracker said:
Btw, you're totally not updating this. You have version 2, Kaffee is now on version 5.
Click to expand...
Click to collapse
Really?... I totally missed it... I'll probably update the new version later this eve... Thanks for the heads up!
Sent from my SGH-I777 using Tapatalk 2
OP updated with V5... sorry guys I missed a few versions... The original thread changed names and it threw me off... enjoy!
Nice runninnng rom!! Loaded with all the apps most use, stable n complete!!
Thanks Mick!!
Sent from my SGH-I777 using XDA App
Running this. :3 Getting random crashes. Not to often, not sure if only me or if other people have this occasional problem. Also does anyone still make GB MIUI I miss being able to theme the Framework and Status bar in one click of a theme.
The Boxinator said:
Running this. :3 Getting random crashes. Not to often, not sure if only me or if other people have this occasional problem. Also does anyone still make GB MIUI I miss being able to theme the Framework and Status bar in one click of a theme.
Click to expand...
Click to collapse
Try the other Samsung miui.
miui v4 rom / flexreaper
Think I am gonna switch to WIUI XD I love the theme's far too much <3 Thanks again
hi im currently in process of porting a stock deodexed rom.
i have changed system files and the update script.for out i9305. at moment i am able to install the rom fine and loads up with or without wipe. i also included the ee modem.
my issue is that when the rom starts all is ok and there are no force closes however i get no network and imei shows null. to resolve this i just flash param.tar in odin and stock file and all is back to original with imei restored.
any ideas on whats causing the loss of imei number
in setting imei and baseband showbas unknown
edit whilst restoring to stock i did not have to restore imei backups so am asuming efs part is fine
Sent from my GT-I9305 using Tapatalk 2
Check 9500 partition layout and update install script. Dont rewrite the efn part.
Sent from my GT-I9305 using xda app-developers app
have done that part rom installs fine baseband is unknown
Sent from my GT-I9305 using Tapatalk 2
I think u need to Flash a baseband from our i9305 after flashing The Potter rom
but wouldnt that be the modem file iv tried flashing it on radio partition
Sent from my GT-I9305 using Tapatalk 2
right iv ported wanam lite rom to our device, the aroma works i boot up fine but baseband still unknown so annoyin
Sent from my GT-I9305 using Tapatalk 2
i am really into this thread. I opened a thread similar at the beginning but they moved it, hope this one stays in here otherwise it will get lost in the i9300 section...... this is really good lets all try get into this, like i said I am going to play around on monday when i return home, so far we got everything going exceept the Modem is not connecting to the Imei correctly, We need an experienced dev.
---------- Post added at 09:25 AM ---------- Previous post was at 09:14 AM ----------
Just think how many roms we can have if we get this going
Sent from my GT-I9305 using xda app-developers app
Try merging our system and framework so it picks it up as our xxali5 or xxali9 you have to get rid of there base and put our base instead but leave the edited files so maybe the system apps folder stays the i9300 as the apps are the same i think but change the rest into our firmware hmmmm so maybe a better idea would be to have a blank deodexed and zipaligned xxali5 rom move and overwrite our files with the edited files of the i9300 that way all our efs and imei doesnt get touched
Sent from my GT-I9305 using xda app-developers app
going to check ril today see if that sorts it
Sent from my GT-I9305 using Tapatalk 2
Great thread, wish I could contribute more.
At the moment I'm hanging to see what the more clued up guys around here work out!
added the ril files and qualcom ril files but basebands the same
also the serail number has changed on device tried reflashing modem but doesnt help
chwads2k8 said:
right iv ported wanam lite rom to our device, the aroma works i boot up fine but baseband still unknown so annoyin
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Basically there are some intensely different changes within the services.jar, framework.jar, android-policy.jar and so forth. 4G LTE is sooo much different than the stock i9300. I am not saying it CAN'T be done. But I am saying it is going to be a complete bastard to do. Put it this way, you'd be better off looking into all of the modifications that have been done to create these ROMS and re-doing them to the i9305.
Trust me, I have looked into doing this with a "customised" build to from sources for ICS for the P7320T tablet that I had. It is the only 4G tablet released here in Australia. The closest I could find in sources for being able to make the connection was grabbing settings systemUI and the others I have listed above ^^^ from the S2 4G LTE. Then I was going to have to modify the systemUI specifically for tablet mode.
I no longer have the tablet nor the patience to want to take on anything like it again.
All I can say is good luck. Feel free to check my threads to confirm that my choices are not a conflict of motivation or lack of determination...god I can assure you that much
Just for a tip. I started today with decompiling the android-policy.jar file to see if I could enable the torch app double click home from lock screen feature....this has been done on i9300 right? Go take a look at the full guide on how to do it...go decompile 1 file that I am talking about and you will see just how different the methods are in all of the smali code. JOY!
---------- Post added at 03:34 AM ---------- Previous post was at 03:23 AM ----------
chwads2k8 said:
added the ril files and qualcom ril files but basebands the same
also the serail number has changed on device tried reflashing modem but doesnt help
Click to expand...
Click to collapse
What tools are you using to "port" this ROM to our device?
I have tools that can port ROMs in about 30-40min.
What have you got in the build.prop for this thing? Do you want to upload the ROM for me to take a look at? The least I could do is offer some help before raining on your parade lol.
Have you considered doing maybe a "splice" of the ROM. Rather than porting the full version, you could do a diff/compare of the modded ROM against it's stock counterpart. Then you migrate those changes over to your "stock i9305" base. That is going to be your best chance of doing this I reckon? also you won't be able to copy across the firmware version. That won't work. Your framework and the firmware version are going to be device specific.
The absolute best thing I can think of suggesting is to go with a known base equivilant?? Like it seems that there is a release of XXALI5 (for touchwiz at least?) on both devices. That would be where I would start first and foremost. I would port with that common version using what I described above and then migrating any further or additional functionality (developer made i.e. Wanams mods) that have been done since the XXALI5 release.
That is going to be your best bet.
Or you guys could just wait for me to release my ROM haha...subtle promotion? I think not.
btemtd said:
Try merging our system and framework so it picks it up as our xxali5 or xxali9 you have to get rid of there base and put our base instead but leave the edited files so maybe the system apps folder stays the i9300 as the apps are the same i think but change the rest into our firmware hmmmm so maybe a better idea would be to have a blank deodexed and zipaligned xxali5 rom move and overwrite our files with the edited files of the i9300 that way all our efs and imei doesnt get touched
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Exactly
I have a methodology that does this very easy. I wanted the OP to upload his work so far to save me a download. But I might just go ahead and do it anyway.
Have you guys got permissions from Wanam to use his work? I will ask on your behalf if not. He is a great contributor to this forum, I don't wish to have him offside.
What I mean is that I will go ahead and play, but I won't re-upload any test files to the forum without his consent This shouldn't be too hard
---------- Post added at 12:40 PM ---------- Previous post was at 11:53 AM ----------
Contacted Wanam. I will wait to see what he says and recommends. I have claimed I am not releasing anything of his, so this can be owned by you guys who want it. I am happy to help get the ball rolling to help yous though. I have my own dev team that I work with so that makes me kinda busy. That is why I haven't released my own ROM on here yet lol
Downloaded XXLAI5 Wanam, Downloaded XXLAI5 stock i9300, have already downloaded XXLAI5 stock i9305 and I am currently deodexeding it as we speak.
Will deodex i9300 XXALI5 next and then do a comparison to Wanams. Segregate changed files - > port to stock deodexed base = Wanam i9305 for you guys
That's if Wanam approves of course?
EDIT: Hey Mr OP can you please contact me? I cannot send you PMs? Holy smokes you've been around this place since 09!
Ok Analysis done on Wanam compared to stock XXALI5 and have all the of the files seperated and within their directory structure that had changes.
There is going to be some work needed to be done on these main files:
/system/framework/android.policy.jar
/system/framework/framework2.jar
/system/framework/services.jar
/system/app/systemUI.apk
As I expected
Now the fun n games start I will decompile all of these files and then diff them against the standard i9300 smali coding and then *attempt* (and I say that with all great intension too) to migrate the changes across into decompiled i9305 files.
I can tell this is going to be a head ache!
Otherwise though....I can honestly say that what I have got so far I know for certain will boot and you will not have baseband issues. You won't however have 15 toggle mod as it stands. Services.jar and Android policy.jar both control this feature. I see that this *IS* available as a mod already on this forum but I am not certain that the creators realise that these modifications (mentioned here) actually do need to be performed.
Lidroid-res.apk within framework will have no rights to control the toggle on the systemUI cause it won't have permissions due to conflicting signature checking. note...toggles may appear, but they won't do anything when you touch the widget toggle, it will be non-responsive.
Thanks guys
Thats what i said we should just try copying over the whole system app folder and replacing it with our deodexed rom. Try doing that as the firstt step
Sent from my GT-I9305 using xda app-developers app
btemtd said:
Thats what i said we should just try copying over the whole system app folder and replacing it with our deodexed rom. Try doing that as the firstt step
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
System app is fine, but that isn't where the changes are that make Wanams ROM. You'd have your self a standard ROM otherwise. As in no difference. Or if you just copied the system/app folder ROM would boot but systemUI would force close. You would also have no reboot menu and no USB read from the phone. That would equal disasterous....cause as we all know we don't have SD mount in recovery do we?
Fancy doing an adb push on a phone that doesn't install USB connection files?
See I wouldn't be stupid enough to do that without having at least a clockwork recovery backup lol.
It's ok. for the android.policy.jar they are identical (well for XXALI5 they are anyway) to the i9300. So simple trade in there.
Only 4 more files to go and I will have you guys a port
Wanam still has not contacted me back yet though so I we need approval before anything.
Reset scrolling caches. In framework2.jar
This took a bit of work because my notepad++ kept crashing running compare. If you guys ever have this issue, right click the executable in program files go to properties and compatibility and then check the boxes for:
- disable visual themes
- disable desktop composition
- disable high dpi scaling.
Apply.
No more crashing. Windows 7 aero apparently doesn't like the compare dll?
Anyway not related. I am back on track. last jar file and then it should be ready to package up and it will be the same as Wanam ROM XXALI5
Got approval from Wanam. Just about to test flash now. Will upload it here if everything works out
Well, I had a few mishaps with my own device. Namely no root access and also lost hardware ID...meaning no Android Market. This all happened sometime during my lengthy list of modifications so I was not sure where. That mean flash back to stock and restore my data bit by bit until I was set up again. This take for EVER!
So yeah no real feedback from anyone in here so have decided to finish off my own ROM instead. XXALI9 (newer) and a heap more mods than stock Wanam. So far so good.
I can upload what work I did on getting Wanam's up and running (I have not flashed it yet) but will wait till someone actually wants before I go ahead and do that.
Thanks guys
James
I WILL NO LONGER BE SUPPORTING THIS THREAD WITH MY OWN PERSONALLY FOUND INFORMATION. THOUGH IF ANYONE PRESENTS ME WITH NEW ROMS AND PROOF THEY WORK AND LEGIT, ILL GLADLY ADD THEM TO THIS THREAD. JUST MESSAGE OR TAG ME.
THIS THREAD IS DEDICATED TO ROM'S THAT WORK WITH SAFESTRAP ON VERIZON ME7.
COULD THESE ROM's WORK FOR YOU NON VERIZON FOLKS OUT THERE? I DON'T KNOW... I'M ONLY TESTING WITH A VERIZON S4 SO FLASH AT YOUR OWN RISK
Standard Disclaimer:
I am not responsible for anything that may happen to your device.
First of all none of this would be possible with out @Hashcode. So A BIG THANKS to him!!!!
What is SafeStrap? and Where Can I Find it?
http://forum.xda-developers.com/showthread.php?p=45517751
For Us On Me7 We Can Only Use Roms using the Me7 Kernel
INSTRUCTIONS:
1. DOWMLOAD ROM OF YOUR CHOICE (STILL THINK IT HAS TO BE Me7 BASED)
2. FLASH ROM (DO NOT REBOOT YET, YOU MUST DO STEP 3 FIRST BEFORE REBOOT)
3. FLASH HASCODES FIX OVER TOP OF ROM ------> http://forum.xda-developers.com/devdb/project/dl/?id=507
4. REBOOT&PROFIT!!!!
***NOTE THESE ARE ROMS I HAVE PERSONALLY "TESTED", IF YOU FIND A ROM THAT DOES OR DOESN'T WORK SUBMIT A LINK TO THAT ROM IN YOUR POST AND ILL TEST IT AND THEN ILL ADD IT THIS LIST***
TESTED = It Booted, GPS, WIFI and DATA WORK. I Tried a NAVIGATION APP TO CONFIRM GPS LOCK. I CONNECTED TO MY HOME WIFI NETWORK AND USED WHATEVER STOCK BROWSER CAME WITH THAT ROM TO CONNECT TO A WEBSITE and I DID THE SAME OVER CARRIER NETWORK (DATA). I MADE ONE PHONE CALL
ROMS THAT WORK!!!! (IF YOU LIKE ANY OF THESE ROMS DON'T FORGET TO DONATE TO THE ROM CREATORS AND SHOW YOUR APPRECIATION FOR THEIR HARD WORK. MOST OF THE OPs HAVE DONATE LINKS)
***I ONLY CHOOSE STOCK KERNELS WHEN and IF AROMA PRESENTED A CHOICE***
GOOGLE PLAY EDITION VERIZON ROM: http://forum.xda-developers.com/showthread.php?t=2343355
HYPERDRIVE http://forum.xda-developers.com/showthread.php?t=2301724
ECLIPSE http://www.elementalxdesigns.com/ec...S4-TW-Edition-ME7-Progress-build-01-(8-15-13)
ECLIPSE GE http://forum.xda-developers.com/showthread.php?t=2363813
JELLY BEANS BUILD 6 http://forum.xda-developers.com/showthread.php?t=2307357
BONESTOCK http://forum.xda-developers.com/showthread.php?t=2384362
SYNERGY ROM http://forum.xda-developers.com/showthread.php?t=2319177
CLEANROM http://forum.xda-developers.com/showthread.php?t=2305781 - 4g Doesn't Work. THIS ROM ONLY
**Below Are Roms You The Community Found To Work**
**I Have Not Tested Flash With Caution**
Xtremeperia http://forum.xda-developers.com/showthread.php?t=2419803
ROMS THAT DONT WORK SO FAR
AOSP Source Built
CyanogenMod Nightly
I Made A Video On How To Install A Rom Using SafeStrap. In The Video I'm Installing The Google Play Edition Rom
If You Appreciate the effort I'm Putting In To Make Sure Us with Me7 Have A Complete List Of Working Roms For SS. Please Hit That Thanks Button and Show Me Some Love!!!
killajoe said:
This is A Thread Dedicated to Roms That Work With SafeStrap For Verizon Galaxy S4.
What is SafeStrap? and Where Can I Find it?
http://forum.xda-developers.com/showthread.php?t=2428226
For Us On Me7 We Can Only Use Roms using the Me7 Kernel
Click to expand...
Click to collapse
Wish the ROM's with a stock kernel were a bit smaller, it's a pain in the ass to download a 1GB file to flash, my other devices were usually only like 165MB!!!
Little premature dont you think. Its not even released yet.
---------- Post added at 06:45 PM ---------- Previous post was at 06:42 PM ----------
bfmetcalf said:
Wish the ROM's with a stock kernel were a bit smaller, it's a pain in the ass to download a 1GB file to flash, my other devices were usually only like 165MB!!!
Click to expand...
Click to collapse
Your not downloading directly to your device are you?
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
hexitnow said:
Little premature dont you think. Its not even released yet.
Click to expand...
Click to collapse
Guess again.
Go read up.
Sent from Navi
hexitnow said:
Little premature dont you think. Its not even released yet.
---------- Post added at 06:45 PM ---------- Previous post was at 06:42 PM ----------
Your not downloading directly to your device are you?
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Click to expand...
Click to collapse
ha, yeah, I'm at work and can't use the computer to send it to the phone. I'm just too excited about the whole thing so I'm downloading GPE on the phone, i'm on a 8GB shared plan with 3 others that use on average about .07GB each per month, so I"m good just takes a while
michaelg117 said:
Guess again.
Go read up.
Sent from Navi
Click to expand...
Click to collapse
Ya you can test rom flashes. No stable release tho. Regardless its awesome to see the progress this has gone through. I was lucky enough to get an mdk version and not take update, once its on the play store im going to buy it to support his work. Go hash.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
killajoe said:
This is A Thread Dedicated to Roms That Work With SafeStrap For Verizon Galaxy S4.
What is SafeStrap? and Where Can I Find it?
http://forum.xda-developers.com/showthread.php?t=2428226
For Us On Me7 We Can Only Use Roms using the Me7 Kernel
GPE ROM: http://forum.xda-developers.com/show....php?t=2343355
Options Choose in Aroma:
ICS Theme: Pure Google Experience - WIFI ISNT WORKING
Dubbsy's Choice - WIFI ISNT WORKING
Touchwiz Theme: Pure Google Experience - WIFI ISNT WORKING
*Im moving on to another ROM I DID NOT EXPLORE the whole ROM it booted, Made a phone call and that is all.
***ROMS THAT SO FAR DONT WORK****
HYPERDRIVER
BONESTOCK
Click to expand...
Click to collapse
your gpe link is not working. Also, how do i actually put the rom onto the partition?
anyway to get back into safestrap if you are booting and getting the odin downloading screen?
Eclipse
I hate to ask but can you test out this rom http://www.elementalxdesigns.com/ec...S4-TW-Edition-ME7-Progress-build-01-(8-15-13).
Nitro has some pretty good stuff and I really would not know where to start if something went wrong.
Thanks
jamskies said:
your gpe link is not working. Also, how do i actually put the rom onto the partition?
Click to expand...
Click to collapse
should be fixed
jrv331 said:
i hate to ask but can you test out this rom http://www.elementalxdesigns.com/ec...s4-tw-edition-me7-progress-build-01-(8-15-13).
Nitro has some pretty good stuff and i really would not know where to start if something went wrong.
Thanks
Click to expand...
Click to collapse
sure ill test. Downloading now
jrv331 said:
I hate to ask but can you test out this rom http://www.elementalxdesigns.com/ec...S4-TW-Edition-ME7-Progress-build-01-(8-15-13).
Nitro has some pretty good stuff and I really would not know where to start if something went wrong.
Thanks
Click to expand...
Click to collapse
Just give it a while pretty much if it doesn't boot you battery pull and go back into recovery by pressing the menu button on the recovery splash screen.
Sent from my SCH-I545 using Tapatalk 4
Addiso said:
Just give it a while pretty much if it doesn't boot you battery pull and go back into recovery by pressing the menu button on the recovery splash screen.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Im coming from several years on a Motorola so I know SS pretty well, but this odin stuff is new to me. Plus Im coming from the razr maxx where a battery pull was never an option.
Thanks
jrv331 said:
I hate to ask but can you test out this rom http://www.elementalxdesigns.com/ec...S4-TW-Edition-ME7-Progress-build-01-(8-15-13).
Nitro has some pretty good stuff and I really would not know where to start if something went wrong.
Thanks
Click to expand...
Click to collapse
Works but no wifi sorry
killajoe said:
Works but no wifi sorry
Click to expand...
Click to collapse
That seems to be a common thing with the roms being flashed. Oh well at least the biggest hurdle has been broken. Up to the devs now to work their magic.
You need to flash this its called me7 modules wifi should work fron the man himself. Put in op if you want. http://db.tt/b53s2Hyz
Sent from my SCH-I545 using Tapatalk 4
anthony92170 said:
You need to flash this its called me7 modules wifi should work fron the man himself. Put in op if you want. http://db.tt/b53s2Hyz
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Do I Flash this in SS after you install the rom?
Thanks
jrv331 said:
Do I Flash this in SS after you install the rom?
Thanks
Click to expand...
Click to collapse
yes, after you flash ROM to to selected Rom slot, then select the kernel patch zip and flash that after ROM is installed.
---------- Post added at 07:29 AM ---------- Previous post was at 07:25 AM ----------
I flashed the elclipse rom with no issue and did the kernel patch right after but I can't verify wifi as I am work. My wifi analyzer program sees our WAPs so thats a good thing.
I also did the GPE Rom and kernel patch and wifi does work. My only hiccup was I lost of radio/mobile data on the stock rom as well as GPE rom and took me a bit to see the network selection was not on CDMA/LTE/EVDO. Once I selected that, everything worked
Just waiting on the weekend and SD-compatible rom slots before doing any development, here's what I've tested so far.
Note: All roms installed first, then ME7 modules applied. If configurable, all options sent to minimal/stock settings.
Currently tested roms:
GPE 6.0
Hyperdrive (Latest, works with certain options only/not heavily tested)
Jellybeans Build 6 (Didn't Work for me)
Bone Stock (Didn't Work for me)
AOSP Source Built (Didn't Work for me)
CyanogenMod Nightly (Didn't Work for me)
Issues with GPE:
Cell radio loses data after a period of time (cause unknown)
Advanced battery stats crashes (cause unknown)
bikedude880 said:
Just waiting on the weekend and SD-compatible rom slots before doing any development, here's what I've tested so far.
Note: All roms installed first, then ME7 modules applied. If configurable, all options sent to minimal/stock settings.
Currently tested roms:
GPE 6.0
Hyperdrive (Latest, works with certain options only/not heavily tested)
Jellybeans Build 6 (Didn't Work for me)
Bone Stock (Didn't Work for me)
AOSP Source Built (Didn't Work for me)
CyanogenMod Nightly (Didn't Work for me)
Issues with GPE:
Cell radio loses data after a period of time (cause unknown)
Advanced battery stats crashes (cause unknown)
Click to expand...
Click to collapse
JellyBeans B6 works when flashing ME7 kernel provided by St. Hashtag
I read through the stickies. I tried to put together a working kitchen, etc. However, the links inside the guides are apparently obsolete. I got a lot of "unable to locate package" errors when trying to build up my my linux vm development environment. I should preface that I work in IT on the server side. I spend most of my days working from bash administering to linux servers, but I don't run Linux as my primary at home other than hobby vm's, so while the commands in the tutorials make sense to me, I am not really sure how to find the updated packages that I might need to complete my development environment.
I really want to learn how to develop my own ROMS, and I am looking for square 1, then square 2, etc. I have been googling, but everything I have stumbled into so far is outdated, which is why I am asking for help here.
Is there a class I can take out there, or online up to date guides/trainings? If you were looking to get started now, where would you begin. Any and all advice appreciated.
I found a more updated guide for creating the vm env. So I am off with that. Still open to advice for a noob if you feel like giving it, but I am at least past the first hurdle.
Anyone know where I can find the source code for my Galaxy Tab s2 so I can begin working on the rom?
Sent from my SM-T810 using Tapatalk
musiclover7 said:
I found a more updated guide for creating the vm env. So I am off with that.
Click to expand...
Click to collapse
Care to share? You are not probably not the only one looking for such....
This was the guide I followed, but I will say, I am unfortunately no further along now than I was before. I have a more or less working vm environment, but I got hung up at the point where you try to add a repo containing the ROM you want to work with. I very much want to improve/debloat the stock ROM that comes with my Galaxy Tab S2, but I could not figure out how to change those commands to work with that device rather than Cyanogen mod.
http://tutorialforlinux.com/2015/09...tu-15-10-wily-32-64bit-linuxgnu-visual-guide/
Someone needs to really write a book on this subject. There are some decent youtube videos out there that show some very basic things, but many of the posters appear to be hacks themselves, and they don't get very thorough. I've looked, there really appears to be no comprehensive source of information for those of us that are new to this sort of thing in the year 2016. There are some 4 year old guides, which contain broken links etc..
Now, I know that to create such a guide takes time, and I know that time is scarce, and I also know that there are probably a lot of other people like myself, coming to these forums every day, asking question after question. Could get pretty taxing to be someone in the know...
But really, there is no book? I mean, I'm watching this video and it just shows a guy editing files kind of willy nilly within the zip, explaining in a fashion what he is doing, but also stating that it's not really safe to change this stuff unless you know what you are doing... Well, that's what we are trying to learn. Thats why I am watching your video bud. Interesting...
So I'll ask again, if you were looking for step 1, 2, 3 in the year 2016, where would you start?
Sent from my SM-T810 using Tapatalk
musiclover7 said:
This was the guide I followed, but I will say, I am unfortunately no further along now than I was before. I have a more or less working vm environment, but I got hung up at the point where you try to add a repo containing the ROM you want to work with. I very much want to improve/debloat the stock ROM that comes with my Galaxy Tab S2, but I could not figure out how to change those commands to work with that device rather than Cyanogen mod.
Click to expand...
Click to collapse
You can debloat your original ROM without building it from source. You just need to download the original zip file and then unzip and deodex it and then you can remove programs and zip it again and then flash.
This guide does not talk about deodexing (because custom ROMs are always deodexed). So find the deodexing part here in the forum. Otherwise this guide tells it all.
http://xda-university.com/as-a-user/zip-based-rom-tweaking
When I unzip the file, I wind up with a single .Md5 file, about 2x the size of the original file. I am working with the stock image. There really are no ROMS for my device, which is why I am taking this on. I can further open up the md5 file say with winrar, and I wind up with 6 or so .img files with the correct names, like system, etc. At no point to I see folders.
I think I am missing something. This being stock ROM, maybe there is a step that needs to be taken with stock zips that is different from custom roms. If so, I would love that info.
I think this device is amazing, probably the best I have ever owned, and it would just be that much better with a new slick OS.
Sent from my SM-T810 using Tapatalk
musiclover7 said:
When I unzip the file, I wind up with a single .Md5 file, about 2x the size of the original file. I am working with the stock image. There really are no ROMS for my device, which is why I am taking this on. I can further open up the md5 file say with winrar, and I wind up with 6 or so .img files with the correct names, like system, etc. At no point to I see folders.
I think I am missing something. This being stock ROM, maybe there is a step that needs to be taken with stock zips that is different from custom roms. If so, I would love that info.
I think this device is amazing, probably the best I have ever owned, and it would just be that much better with a new slick OS.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I have not deodexed a single stock ROM, but I guess deodexing brings you that folder structure from those imgs. Try to find out about deodexing.
---------- Post added at 08:34 PM ---------- Previous post was at 07:58 PM ----------
Which version of S2 do you have?
Here is at least one Deodexed + De-knoxed + Debloated ROM for T815 AOJ4:
http://forum.xda-developers.com/tab-s2/general/deodexed-knoxed-debloated-zip-t815-aoj4-t3272908
If it is LP or MM android then try finding deodexing and unzipping quides for those.
---------- Post added at 08:48 PM ---------- Previous post was at 08:34 PM ----------
Here is at least one new discussion of deodexing tool. Should work with LP and MM.
http://forum.xda-developers.com/android/software-hacking/tool-batch-deodex-rom-t3313150
---------- Post added at 09:35 PM ---------- Previous post was at 08:48 PM ----------
This might help unpacking your ROM.
http://forum.xda-developers.com/showthread.php?t=2138885
Thanks Lammpa! That gives me some good stuff to start cracking on. For the record, I have th 9.7 inch T810. It is a brilliant machine.
Sent from my SM-T810 using Tapatalk
musiclover7 said:
Thanks Lammpa! That gives me some good stuff to start cracking on. For the record, I have th 9.7 inch T810. It is a brilliant machine.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
No problem. I hope you manage to succeed.
Hello People of XDA, I just complied some tweaks of build.prop and initd from some roms like odexlite credit goes to @Aria.A97 it is all his work I just combined them together which makes device smooth and battery friendly.
This script works on S8 ports and stock roms and all stock based custom roms. You can also flash this after flashing any note 5 rom from their forum but first flash note 5 porter here https://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/note-5-rom-converter-android-7-0-t3587589 then flash tweaks.zip and at last flash magisk v12 zip then reboot to system and you can update your magisk from app.
for all exynos 7420 devices
here is fixed zip https://mega.nz/#!TABjBC6C!wclNBq0ObW7GCdMEiYY0KJlnHjzmn032sOgo5WzKC2I
Mod edit
What tweaks specifically?
Oh I downloaded the zip I see it's exactly the files from my ROM, you should've asked for permission!
@UltraGamerHD Nothing really specific. It's more like clickbait. These stuff isn't really as effective as this guy advertises.
Aria.A97 said:
Oh I downloaded the zip I see it's exactly the files from my ROM, you should've asked for permission!
@UltraGamerHD Nothing really specific. It's more like clickbait. These stuff isn't really as effective as this guy advertises.
Click to expand...
Click to collapse
Yeah I saw that too.
---------- Post added at 07:38 PM ---------- Previous post was at 07:36 PM ----------
Aria.A97 said:
Oh I downloaded the zip I see it's exactly the files from my ROM, you should've asked for permission!
@UltraGamerHD Nothing really specific. It's more like clickbait. These stuff isn't really as effective as this guy advertises.
Click to expand...
Click to collapse
BTW. Your OdexLite could do with an update. Also could you make sure in the next update that if you choose flat then you get flat build.prop and not all edge props.
alright guys sorry to @Noxxxious i did't knew about your kernel's privacy ok i have removed his kernel and @Aria.A97 as i have mentioned in post that i took these tweaks from roms. Yes it means i took them from your rom too. I forgot about giving proper credits and @UltraGamerHD these build prop tweaks works really fine at least for me i was having battery drain on every s8 port rom and it fixed that and gave me good battery timming.
if you really don't see anything special in it then don't use it. I'm not advertising SHARING YOUR IDEAS IS CARING NO ONE PAYS ME FOR THIS LITTLE DUMB THING EVEN IF SOMEONE WORKS HARD AND POST A FULL FLEDGED ROM. OK SO DON''T TAKE IT SOOO SERIOUSLY AND STAY CALM DON'T ACT LIKE A KID.
Installation failed with error 7 for me i use khengloi s8 port with nog33k rc5
merwan said:
Installation failed with error 7 for me i use khengloi s8 port with nog33k rc5
Click to expand...
Click to collapse
wait let me see
merwan said:
Installation failed with error 7 for me i use khengloi s8 port with nog33k rc5
Click to expand...
Click to collapse
check back in 2 mins uploading new one
qasim799 said:
alright guys sorry to @Noxxxious i did't knew about your kernel's privacy ok i have removed his kernel and @Aria.A97 as i have mentioned in post that i took these tweaks from roms. Yes it means i took them from your rom too. I forgot about giving proper credits and @UltraGamerHD these build prop tweaks works really fine at least for me i was having battery drain on every s8 port rom and it fixed that and gave me good battery timming.
if you really don't see anything special in it then don't use it. I'm not advertising SHARING YOUR IDEAS IS CARING NO ONE PAYS ME FOR THIS LITTLE DUMB THING EVEN IF SOMEONE WORKS HARD AND POST A FULL FLEDGED ROM. OK SO DON''T TAKE IT SOOO SERIOUSLY AND STAY CALM DON'T ACT LIKE A KID.
Click to expand...
Click to collapse
I was not questioning the validity of the tweaks included. I was asking what tweaks were included, I wanted a little specificity. However you should read before you post.
UltraGamerHD said:
I was not questioning the validity of the tweaks included. I was asking what tweaks were included, I wanted a little specificity. However you should read before you post.
Click to expand...
Click to collapse
i can not list them right now download the zip it is less than 5 mb and see yourself
qasim799 said:
i can not list them right now download the zip it is less than 5 mb and see yourself
Click to expand...
Click to collapse
I have anyway!!
qasim799 said:
check back in 2 mins uploading new one
Click to expand...
Click to collapse
its ok...
Why bother opening a thread if you are not even willing to list the tweaks inside.. calling out other kids too, maybe you need a new mirror dude