SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.
Related
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
kozav100 said:
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
Click to expand...
Click to collapse
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Reply
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
stympy said:
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Click to expand...
Click to collapse
kozav100 said:
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
Click to expand...
Click to collapse
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Radiomodule
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
stympy said:
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
Click to expand...
Click to collapse
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Modem change
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
stympy said:
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
Click to expand...
Click to collapse
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Usb driver
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
stympy said:
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Click to expand...
Click to collapse
kozav100 said:
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
Click to expand...
Click to collapse
If its so urgent... try this one !
****, I am still stuck on with USB driver Installation.
The files you have provided, I have successfully downloaded them.
When I connect the device to my laptop, the PC sees the device and asks for a driver, I have installed these drivers you provided but my laptop does not recognize them as compatible drivers saying that device is not recognised, I am stuck and I think I can not move any further because of this
Zero results
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
kozav100 said:
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
Click to expand...
Click to collapse
Hi. The computer with windows installed recognize this piece of hardware for just a second in device manager. I have windows 7 installed and when i connect the phone some autorun starts with the driver. Your phone does that ?
Attempts for phone root with intention to change the modem
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
kozav100 said:
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
Click to expand...
Click to collapse
Hi. Lets try this trick :
1. Look on the internet for this app called 1 Mobile Market apk
2. Download and install.
3. There you will find alot of chinese app for rooting.
4. Install and try to root your phone.
5. If you succeed instal Mobileuncle Tool and flash TWRP recovery from there.
6. After this you can flash modems
7. Good luck.
8. Waiting for feedback.
Sent from my Lenovo P780
SUCCEEDED!!!
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
kozav100 said:
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
Click to expand...
Click to collapse
Hi. Yes you are right. Flash modem reboot see if works, if dont work reflash other so on and on and on.. When you flash new modem will overite the old modem.
Good Luck, and waiting for feedback.
Modem Firmware change success
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
kozav100 said:
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
Click to expand...
Click to collapse
Hi. You could try one more who i think is the same as v23. The modem from LiFe rom must do the job. I used both and have no problems.
Good Luck.
I will for sure try the firmware you have advised above.
Moreover, I proceed to receive an OTA Updates for the Android system, but taking into account the last issue with modem, understanding that it will not do any good only harm. What do you think about it ?
Regards,
kozav100
I'm looking for the stock ROM for the vodafone 888. The phone won't boot because an update went wrong but I still have access to the recovery menu.
The current ROM version reported in the recovery is:
4.4.220.06.T3.140404.DVT49L.VF.GR
Thank you!
silverThe said:
I'm looking for the stock ROM for the vodafone 888. The phone won't boot because an update went wrong but I still have access to the recovery menu.
The current ROM version reported in the recovery is:
4.4.220.06.T3.140404.DVT49L.VF.GR
Thank you!
Click to expand...
Click to collapse
hi.
i am looking for the stock firmware for this device..anyone has it..? or recovery or custom rom..?
have u find a firmware?
my vodafone 888 does not boot any moore
fixed my phone today and all is well. The name of the phone is actually coolpad 7576u and the firmware i downloaded from http://www.yulong.com/product/produ...productBO.product.id=6504&productBO.menuId=30
the frogram to install this firmware is Coolpad Download Assistant Setup V1.86_140626 (google-it)
steps to install are simple.
1 download firmware
2 unzippit to *.CPB
3 start program
4 point program to the unzipped rom
5 connect phone to pc without battery (you remove the battery)
6 wait until is done
7 ENJOY
Did you install some drivers? Mine doesn't seem to work. I load the rom into Coolpad Download Assistant, I hit some button in Chinese, instinctively, then a bar loads to 100% and another one is at 0%. Stays like this forever nothing happens to the phone. It is in fastboot mode, battery off, plugged in with usb cable, adb drivers installed.
Later edit: I finally got it right. Reinstalled the drivers...
i have the same problem.any idea?
---------- Post added at 09:20 AM ---------- Previous post was at 08:55 AM ----------
i am looking for drivers
Install android sdk - now also integrated into Android studio - it should install google adb drivers automatically. Also give the PC and phone a restart after sdk is installed. Then you should have no problem hooking up the phone and yulong download assistant.
freakaleo said:
fixed my phone today and all is well. The name of the phone is actually coolpad 7576u and the firmware i downloaded from http://www.yulong.com/product/produ...productBO.product.id=6504&productBO.menuId=30
the frogram to install this firmware is Coolpad Download Assistant Setup V1.86_140626 (google-it)
steps to install are simple.
1 download firmware
2 unzippit to *.CPB
3 start program
4 point program to the unzipped rom
5 connect phone to pc without battery (you remove the battery)
6 wait until is done
7 ENJOY
Click to expand...
Click to collapse
100% worked for me. Now My Vodafone 888 is fully working.
Download flash Software from here...
Coolpad Download Assistant Setup V1.88
RO.maniac said:
Install android sdk - now also integrated into Android studio - it should install google adb drivers automatically. Also give the PC and phone a restart after sdk is installed. Then you should have no problem hooking up the phone and yulong download assistant.
Click to expand...
Click to collapse
Hey can you help me? I downloaded android SDK and now it recognizes the phone as an ADB Interface. Although on "Coolpad Download Assistant" it goes through the first 10% and then just skips to the end and a weird smile shows up with some chinese stuff.
What am I doing wrong? (I am connecting the phone to the pc withough battery it shows "Fastboot mode TA" on the screen) I'm using my country's rom (4.4.230.33.T3.140715.7576U.vf_pt) Tried with YGDP doesn't work as well...
Edit I'm using windows 8.1 tried on Windows 7 and it goes all the way up to 55%
firmware file needed
I have been searching around sites but unlucky, i cannot find firmware file for vodafone 888 smart 4 / coolpad 7576u firmware file. original site redirects to main page only by the above links. Please help me.
HI where is firmwere¿¿??
xbekoolx said:
I have been searching around sites but unlucky, i cannot find firmware file for vodafone 888 smart 4 / coolpad 7576u firmware file. original site redirects to main page only by the above links. Please help me.
Click to expand...
Click to collapse
gold_mobile said:
HI where is firmwere¿¿??
Click to expand...
Click to collapse
Here you have a .zip file containing the RO version of the stock 4.4.2 ROM for Vodafone 888. You can change the language afterwards, it's just a matter of bloatware apps for each country.
drive: https://goo.gl/o79jHC
vodafone 888
RO.maniac said:
Here you have a .zip file containing the RO version of the stock 4.4.2 ROM for Vodafone 888. You can change the language afterwards, it's just a matter of the bloatware apps that comes with in each country.
https://www.dropbox.com/s/ajp6sbie8eeqn8a/4.4.230.33.T3.140715.7576U.vf_ro.CPB.zip?dl=0
Click to expand...
Click to collapse
Thank you work perfect ! I flash phone with Coolpad Download Assistant
http://forum.xda-developers.com/android/help/stock-rom-vodafone-888-t3002958:)
Vodafone 888
Since I am a new member I can't post links so if anyone wants the greek rom just message me
Not really sure what the error is, but i guess it`s something wrong with the drivers.
After 3% i get the following (see the attached pic)
I used Android_adb-USB_UnifL_Driver_v1.17
from here: http://leshcatlabs.net/downloads_usb_unifl/
tintome said:
Not really sure what the error is, but i guess it`s something wrong with the drivers.
After 3% i get the following (see the attached pic)
I used Android_adb-USB_UnifL_Driver_v1.17
from here: http://leshcatlabs.net/downloads_usb_unifl/
Click to expand...
Click to collapse
I had this problem but at some higher percentage. I just kept retrying and it finally worked. I don't remember if I messed with the drivers anymore once it started. You should uninstall every android/google driver you have, reboot, install again.
Device manager looks fine tough, bootloader interface.
///jos Gâdea & Co///
RO.maniac said:
Did you install some drivers? Mine doesn't seem to work. I load the rom into Coolpad Download Assistant, I hit some button in Chinese, instinctively, then a bar loads to 100% and another one is at 0%. Stays like this forever nothing happens to the phone. It is in fastboot mode, battery off, plugged in with usb cable, adb drivers installed.
Later edit: I finally got it right. Reinstalled the drivers...
Click to expand...
Click to collapse
can u provide a link with the drivers for Vodafone 888? multumesc
Custom rom vodafone 888 ?
domino_xxi said:
can u provide a link with the drivers for Vodafone 888? multumesc
Click to expand...
Click to collapse
uninstall every google/android driver you have, then install android studio, it bundles the drivers, easy. or you can search for some fastboot/adb drivers little package.
I no longer have this phone. sorry for being late
Lefter1s said:
Since I am a new member I can't post links so if anyone wants the greek rom just message me
Click to expand...
Click to collapse
hi can you send me the greek rom please?
Unbrick Oppo R5
Since oppo forums support is minimal and a lot of Oppo R5/ R5s owners are facing difficulties flashing new rom and since Oppo is unbrickable here are a guide as posted to oppo forum members by the member Ricky.
I had clear instructions not to post this tool anywhere BUT THEY DON’T SUPPORT ANY DEVICE and I have to break my promise as they broke any kind of support.
This community (XDA) is to help all members
The tool works with windows 10 and not only with windows 7 as they mention in their instructions
Packages you have to download first
1- Firmware ColorOS https://www.partage-facile.com/LM6Y85FF7Z/r8106ex_11_a.16_150806.tar.bz2.html
File Name: R8106EX_11_A.16_150806.tar.bz2
Size: 1.4GB
MD5: F85ED63BA637B559976D9BFF0AED0187
2- Instructions:
https://drive.google.com/file/d/0B3AWkNVCRSNVZGNRUE1rQW5YOFk/view?sid=
3- Driver : http://en.oppo.com/downloads/firmware/driverForFind5.rar
Mirror for driver http://www109.zippyshare.com/v/MEMiPlOv/file.html
Attention
a-Unbrick tool will wipe all data on your device including photos and music etc, if do you want to reserve your data please make o back up on your PC
b- After unbrick the first time power up take around 5-15 minutes
c- The most important things are to install the driver. For windows 10 you must enable unsigned signature verification through windows advanced settings (google it) prior driver installation.
d- In order to shut phone completely hold the power button for 8 -10 secs
How to use the tool
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
amadoro said:
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
Click to expand...
Click to collapse
For R5 use 14016.
mermigas said:
For R5 use 14016.
Click to expand...
Click to collapse
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
amadoro said:
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
Click to expand...
Click to collapse
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
mermigas said:
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
Click to expand...
Click to collapse
Thank you so much. it worked. Not my Oppo r5 is back alive.
Where is the download?
Is it normal that when I hit the download link there appear aliexpress??
I thought I had bricked my R5 but while trying to follow this guide it wasn't showing up in the "Ports" section of the Device Manager. I found that my phone still had fastboot, so I used it to install latest TWRP and then the repair rom. And now my phone is finally back to working condition! I hadn't modified in any way my phone and one day it got stuck at the logo. Anyway, thanks for the guide Mermigas!
anyone mirror pls
mega
[email protected] said:
anyone mirror pls
Click to expand...
Click to collapse
[dead link]
If it asks for a key leave it blank
Kushracer said:
https://mega.nz/#F!q8YFEJyB
If it asks for a key leave it blank
Click to expand...
Click to collapse
No asking for decryption key
mirror
Uploading here: R5S Unbrick Tools
Please help
After i have done all those instructions: my phone was completely dead(no more display and can't use any buttons).
Please what should i do for revive that.
Link Broken
cpuld you re-load the link of Color Os firmware please?
Its not valid now =(
Number for R5S?
Hi, I tried the 14061 for my OPPO R5S. Unfortunately it did not work. Now the phone is not starting.. help? Should I use another number?
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
Dear Friends.
I need Need Kodak Ektra Stock Rom help pls.
Does that mean you rooted Kodak ektra phone? If yes, please share the method. As I also want to root my phone.
Thanks
I have tried searching for a custom ROM for the ektra which is impossible to find. If there is any please post ?
I do wonder if there is a way of updating the os. As there is nothing listed in the compatible devices for lineageos, I wonder whether this is in plan or can be done
Metufe said:
Dear Friends.
I need Need Kodak Ektra Stock Rom help pls.
Click to expand...
Click to collapse
help pls. backup rom from device.
Did you got stock rom
Metufe said:
Dear Friends.
I need Need Kodak Ektra Stock Rom help pls.
Click to expand...
Click to collapse
Did you managed to get that stock ROM. I have bricked my phone i also need that very badly.
Please reply if got anything. I need atleast system.img file to fix this...
Thanks in advance.
Hi guys. I don't know if you solved this problem, but in case you don't yet, I tell you that I bought a Kodak Smartway X1 and I was looking for a stock Rom too, so I went to kodaksmart.com and send an email to the support group. They gave me a download link of the Rom. I don't know if you still look for the rom file, but if it is so, there you have an alternative. Greetings.
Guy89 said:
Hi guys. I don't know if you solved this problem, but in case you don't yet, I tell you that I bought a Kodak Smartway X1 and I was looking for a stock Rom too, so I went to kodaksmart.com and send an email to the support group. They gave me a download link of the Rom. I don't know if you still look for the rom file, but if it is so, there you have an alternative. Greetings.
Click to expand...
Click to collapse
I tried contacting the support online but they clearly denied for the ROM as it is not in their policy.
Request you to please help me in getting that ROM as my phone is completely dead.. :crying:
[email protected] said:
I tried contacting the support online but they clearly denied for the ROM as it is not in their policy.
Request you to please help me in getting that ROM as my phone is completely dead.. :crying:
Click to expand...
Click to collapse
People of Kodak support answer me. They want more information about the phone. Tell me the exact model of your device so I can give it to them.
Guy89 said:
People of Kodak support answer me. They want more information about the phone. Tell me the exact model of your device so I can give it to them.
Click to expand...
Click to collapse
My phone model is "kodak ektra"
[email protected] said:
My phone model is "kodak ektra"
Click to expand...
Click to collapse
Just like that... Ok.
Did you got the ROM ??
[email protected] said:
My phone model is "kodak ektra"
Click to expand...
Click to collapse
Did you asked from them regarding stock ROM??
I am still waiting for stock ROM as I need that because my phone is completely dead for long time.
Please someone post the stock ROM..
Hello!
Yesterday I received a KODAK Ektra smartphone from my friend. He had a problem - the Anti-Theft protection suddenly turned on. And he did not have the opportunity to unlock the smartphone.
Reset is not possible - Chinese characters are displayed in the recovery menu.
So I had to find the whole smartphone recovery kit.
1. Firmware
2. SP Flash Tool
3. Drivers for firmware mode (via SP FT) as well as CDC driver
Normal flashing is ok, but it does not erase the Anti-Theft lock.
Therefore, I had to do firmware with the option Format All + Firmware (only fot Anti-Theft unlock!!!)
But at the same time, the IMEI code was deleted.
For the IMEI recovery, I used the ModemMETA utility and installing (before using the modemMETA) CDC drivers.
From the link you can find all the utilities that helped me restore the device.
You can avoid problems with the recovery of IMEI if you need regular firmware (without formatting). Or you need to save NVRAM before flashing (it is recommended anyway).
So, for flashing you need:
1. Drivers (for Win 8.1 and 10 you also need to turn off driver signature verification)
2. SP Flash Tool (mode "Download only" or "firmware")
3. Firmware with Scatter file.
Any way save NVRAM (!!!!)
Disconnect Ektra from PC, turn off the phone. Run program, select scatter file, select "Download only" (or Firmware), click Download button, connect phone to PC. Wait. When a small green square with a checkmark appears, disconnect the smartphone from the computer and turn it on. Wait a few minutes for it to turn on (the first launch lasts longer than usual)
If you need to erase Anti-Theft - use mode "Format All+Firmware", flash it according to the instructions above. You don't need using this mode, if you don't have Security Lock on your smartphone!! You don't need to recover the IMEI when IMEI is OK (if *#06# shows IMEI).
You will have smartphone with emty IMEI. Recover IMEI from NVRAM,
OR you can install CDC drivers and use ModemMETA, DB-file MDDB_InfoCustomAppSrcP......EDB and IMEI number you know to recover IMEI.
https://mega.nz/#!J1c0xIKb!V6pZ2yxBVGagv6sqOVEPuavm-P6f_UrmCo3z6C-bpaE
Thank you XuMEPA for sharing all the files
But I am getting "status download exception" error and it happens at system.img file mostly rest all other files are flashed successfully.
Request you to please share the resolution for the same and please ping me on whatsapp or share your whatsapp no. for discussion if you don't mind please.
Thanks and regards,
Gaurang Sharma
+91 8410414294 (whatsapp)
Thank you, honestly, thank you
XuMEPA said:
Hello!
Yesterday I received a KODAK Ektra smartphone from my friend. He had a problem - the Anti-Theft protection suddenly turned on. And he did not have the opportunity to unlock the smartphone.
Reset is not possible - Chinese characters are displayed in the recovery menu.
So I had to find the whole smartphone recovery kit.
1. Firmware
2. SP Flash Tool
3. Drivers for firmware mode (via SP FT) as well as CDC driver
Normal flashing is ok, but it does not erase the Anti-Theft lock.
Therefore, I had to do firmware with the option Format All + Firmware (only fot Anti-Theft unlock!!!)
But at the same time, the IMEI code was deleted.
For the IMEI recovery, I used the ModemMETA utility and installing (before using the modemMETA) CDC drivers.
From the link you can find all the utilities that helped me restore the device.
You can avoid problems with the recovery of IMEI if you need regular firmware (without formatting). Or you need to save NVRAM before flashing (it is recommended anyway).
So, for flashing you need:
1. Drivers (for Win 8.1 and 10 you also need to turn off driver signature verification)
2. SP Flash Tool (mode "Download only" or "firmware")
3. Firmware with Scatter file.
Any way save NVRAM (!!!!)
Disconnect Ektra from PC, turn off the phone. Run program, select scatter file, select "Download only" (or Firmware), click Download button, connect phone to PC. Wait. When a small green square with a checkmark appears, disconnect the smartphone from the computer and turn it on. Wait a few minutes for it to turn on (the first launch lasts longer than usual)
If you need to erase Anti-Theft - use mode "Format All+Firmware", flash it according to the instructions above. You don't need using this mode, if you don't have Security Lock on your smartphone!! You don't need to recover the IMEI when IMEI is OK (if *#06# shows IMEI).
You will have smartphone with emty IMEI. Recover IMEI from NVRAM,
OR you can install CDC drivers and use ModemMETA, DB-file MDDB_InfoCustomAppSrcP......EDB and IMEI number you know to recover IMEI.
https://mega.nz/#!J1c0xIKb!V6pZ2yxBVGagv6sqOVEPuavm-P6f_UrmCo3z6C-bpaE
Click to expand...
Click to collapse
I followed your instructions down to every letter along with learning in general about how to use the SPTool and take NVRAM backup.
My problem - locked out of my phone. Factory reset. Unable to sign in as google locked me out.
Solution - Your Firmware+Download option + NVRAM restoring for IMEI. My phone works perfectly like new.
Thank you so much, thank you
ninjanmizuki said:
I followed your instructions down to every letter along with learning in general about how to use the SPTool and take NVRAM backup.
Solution - Your Firmware+Download option + NVRAM restoring for IMEI. My phone works perfectly like new.
Click to expand...
Click to collapse
How to backup and restore NVRAM on Kodak Ektra as it is non-rooted phone?