I have a dual band (2,4 and 5 Ghz) WiFi router and want my Chromecast 2015 to connect to the 5 GHz network only.
But even if I setup the Chromecast via a 5 GHz device, my Chromecast allways used the 2,4 GHz network instead of the 5 GHz only. It seems the only option is to rename the 5 GHz network.
SGH-i200 said:
I have a dual band (2,4 and 5 Ghz) WiFi router and want my Chromecast 2015 to connect to the 5 GHz network only.
But even if I setup the Chromecast via a 5 GHz device, my Chromecast allways used the 2,4 GHz network instead of the 5 GHz only. It seems the only option is to rename the 5 GHz network.
Click to expand...
Click to collapse
Is it a Freebox révolution ?
My WiFi router is a german FritzBox. I renamed my 5 GHz network to 'WiFi_5GHz' and the ChromeCast is connecting without switching! :good:
jeromelec said:
Is it a Freebox révolution ?
Click to expand...
Click to collapse
Try resetting resolutions hop it’s help
Related
We don't seem to have a Q and A section yet for the SII. Just ordered mine but still finding out more about it. The Samsung website mentions it has dual channel wifi and that means it is much faster. Sorry but what is dual channel wifi? Can't seem to find a simple explanation. Do you need to have a particular router or anything else to benefit from it?
TIA
norm
you don't need a particular router... it just means it has a wi-fi antenna for the 2.4 ghz band and the 5 ghz band... this means the phone should support wireless A/B/G/N(2.4ghz)/N(5ghz).
While a dual band router would give you all of these options you don't need it....
Summary:
Dual Band WiFi in phone = Able to access any type of WiFi hotspot
I own a dual band router and I was glad when I read a few weeks back that it had indeed dual band wifi, just like my Galaxy Tab. HTC phones don't have it, so it's an advantage in comparison with the HTC Sensation.
Usually the 5GHz band is faster, probably because it's not as common and thus not as crowded as the 2.4GHz band...
it is faster but not necessarily for the reason of less devices using it... honestly when it comes down to it it's band width... higher frequency typically = greater bandwidth
Does It support 5.0Ghz frequency band?
I would would really like to know thanks in advance
Sent from my Samsung GNexus <3
Yes, the XPS has a BCM4330 chip which supports 802.11a/b/g/n.
http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM4330
How come my XPS will only connect at 65mbps to any wireless n router?
My dlink supports 300mbps and my laptop will connect at 300Mbps but not my phone
Also,
those specs say its bluetooth is version 4.0, but isnt the XPS version 2.1+EDR ?
Found this on page 16 of online manual for the photon
" This equipment has the capability to operate Wi-Fi in the 5 GHz Unlicensed National Information Infrastructure (U-NII) band."
Can anyone tell me what its implying exactly.
Does this mean the photon can support 5ghz wifi bands?
Sent from my Photon Q using ultramegaextremeXDA
I have a dual 2.4/5 ghz router and my photon doesn't/never has picked up the 5ghz
w0lf215 said:
I have a dual 2.4/5 ghz router and my photon doesn't/never has picked up the 5ghz
Click to expand...
Click to collapse
I know. Neither does mine. But I'm not on stock. On a few of my other phones running stock there is an advanced option in the wifi settings to select between the bands
Sent from my MB855 using XDA
Anyone successfully connected the Mediapad to a 5Ghz wifi AP?
(It should be supported according to the specs: 802.11b / 802.11g / 802.11n)
My Mediapad seems not to find the AP, while I had no problems with an ipad2 to connect to the same AP (channel: 48).
The AP does not show up in WiFiFinder either.
Any ideas? Thanks!
Mediapad wifi don't operate on 5GHz band, only 2.4GHz. The N standard don't mandate devices to use 5GHz.
I see. Thanks for the clarification!
802.11a is 5GHz wifi
441Excelsior said:
802.11a is 5GHz wifi
Click to expand...
Click to collapse
so as n, which is dual band
The s2 has a Broadcom BCM4330 wifi chip.
This chip supports till 72Mbps connection, while I get 65Mbps max on my router.
The router is configured on 802.11B/G/N (speed: MCS7).
11N is 20/40Hz.
As I see on wikipedia here, that the speeds at 20Hz 65Mbps on 800ns GI and 72,20Mbps on 400ns GI
I am still getting max 65Mbps on my phone if it's connected to my extender which can get up to MCS15.
Is there a way to maximize connection speed?
GreekBlood said:
The s2 has a Broadcom BCM4330 wifi chip.
This chip supports till 72Mbps connection, while I get 65Mbps max on my router.
The router is configured on 802.11B/G/N (speed: MCS7).
11N is 20/40Hz.
As I see on wikipedia here, that the speeds at 20Hz 65Mbps on 800ns GI and 72,20Mbps on 400ns GI
I am still getting max 65Mbps on my phone if it's connected to my extender which can get up to MCS15.
Is there a way to maximize connection speed?
Click to expand...
Click to collapse
in the WIKI link of ur post i see the below
Deployment strategies
To achieve maximum output, a pure 802.11n 5 GHz network is recommended. The 5 GHz band has substantial capacity due to many non-overlapping radio channels and less radio interference as compared to the 2.4 GHz band. An 802.11n-only network may be impractical for many users because they need to support legacy equipment that still is 802.11b/g only. Consequently, it may be more practical in the short term to operate a mixed 802.11b/g/n network until 802.11n hardware becomes more prevalent. In a mixed-mode system, an optimal solution would be to use a dual-radio access point and place the 802.11b/g traffic on the 2.4 GHz radio and the 802.11n traffic on the 5 GHz radio.This setup assumes that all the 802.11n clients are 5 GHz capable, which isn't a requirement of the standard. Quite a few wifi-capable devices only support the 2.4 GHz, such as iPhone 4S, and there is no practical way to upgrade them to support 5 GHz. A technique called "band steering" is used by some enterprise-grade APs to send 802.11n clients to the 5 GHz band, leaving the 2.4 GHz band for legacy clients. Band steering works by responding only to 5 GHz association requests and not the 2.4 GHz requests from dual-band clients.
Click to expand...
Click to collapse
my router/modem is 2.4GHz only (i think), I have the huawei hg655d.
so no possibilities?
ps on my pc I get 300Mbps connection (atheros ar5b93 wif card)