Hi everyone,
I recently started to use RRos 8.1. Come from emui 8.
Due to high battery drain and warming device, I really would like to go back to emui. Problem is I can't. I tried some tutoriels found here but no way.
Could you help me please with the needed steps?
I have emui recovery oreo and no root.
Thanks.
What steps did you follow to install RRos 8.1 ?
Thanks for reply.
I used the system.img in the tutorial about RRos and flashed it through fastboot.
Just tried to flash system.img from the stock firmware...
I shouldn't try to do this. Now bootloop. I only have access to Huawei eRecovery, nothing else.
However, today, it's monday. So I just have to wait 9 o'clock and run to buy a brain :silly:
Zypseth said:
Just tried to flash system.img from the stock firmware...
I shouldn't try to do this. Now bootloop. I only have access to Huawei eRecovery, nothing else.
However, today, it's monday. So I just have to wait 9 o'clock and run to buy a brain :silly:
Click to expand...
Click to collapse
Have you already tried Dload method?
Sent from my Honor 9 using XDA Labs
_lucx_ said:
Have you already tried Dload method?
Sent from my Honor 9 using XDA Labs
Click to expand...
Click to collapse
Yes, I did but I have an error. I give up, thanks for help anyway
Related
Hi guys, I followed this tutorial. I did complete backup and then I changed the firmware but the result did not please me, so I went to restore the backup and now my honor 9 does not start.
if someone can do my honor at least re-connect I can recover with twrp
If someone does not understand. VIDEO This is my problem.
if anyone has a way to get a motherboard, to save my honor
The phone in the video isn't the Honor 9. This is the Honor 9 thread. Did you flash firmware for the wrong model?
Pumpino said:
The phone in the video isn't the Honor 9. This is the Honor 9 thread. Did you flash firmware for the wrong model?
Click to expand...
Click to collapse
the video is just an example of what happened
the problem was after i restored the backup.
I must have made a mistake in restoring the backup
Rommco05 said:
You can't turn phone on?
Click to expand...
Click to collapse
yes
no sign of life
Rommco05 said:
Is charged? If yes your phone is hardbricked and u must take him to service
Click to expand...
Click to collapse
it does not load.
does nothing
I spent the day walking in the assists, but nobody could fix
now it's just a paper weight
Someone will happen to have the TWRP back up of Mate 10 Lite with Oreo Installed ... to flash ... please ...
emorenoebultron said:
Someone will happen to have the TWRP back up of Mate 10 Lite with Oreo Installed ... to flash ... please ...
Click to expand...
Click to collapse
Are you already in oreo beta ?
Yes of course
I'm in Oreo, but suddenly I turned it on in the morning and it does not pass the TWRP even though the original recovery is not applicable because it does not allow to return to the fastboot ... And I want to try to install a backup that someone has because it does not allow use the HWOTA tool
gmbengue said:
Are you already in oreo beta ?
Click to expand...
Click to collapse
Today I tried to rebrand my Huawei Mate 10 Pro, the whole process was almost ready, but at the last moment the phone went out, and now it does not respond, just turn on a red LED. someone who has a possible solution?
aleaguilarxD said:
Today I tried to rebrand my Huawei Mate 10 Pro, the whole process was almost ready, but at the last moment the phone went out, and now it does not respond, just turn on a red LED. someone who has a possible solution?
Click to expand...
Click to collapse
Sounds as though your phone is hard bricked. I advise you contact Huawei for an exchange (if you have a warranty). If not, you may have to get another one as there currently isn't a way to fix our hard bricked devices
Sent from my Mate 10 using Tapatalk
aleaguilarxD said:
Today I tried to rebrand my Huawei Mate 10 Pro, the whole process was almost ready, but at the last moment the phone went out, and now it does not respond, just turn on a red LED. someone who has a possible solution?
Click to expand...
Click to collapse
Can you access to your bootloader or erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Can you access to your bootloader or erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
kwell i have simlar problem i have fastboot and erecovery nothing more i try to flash with kanvip or stock rom but i am not sure if am doing it right with the stock, i cant load to the twrp any more even if i flash twrp again.... any help....will be great. ! thanks.
aleaguilarxD said:
Today I tried to rebrand my Huawei Mate 10 Pro, the whole process was almost ready, but at the last moment the phone went out, and now it does not respond, just turn on a red LED. someone who has a possible solution?
Click to expand...
Click to collapse
From what cust/build to which cust/build?
Hello everyone,
I am currently at my wits end. I just got the Mate 10 Pro, rooted and TWRPed it after getting the OEM unlocker et al. Decided to try the LineageOS and ran into trouble there. Now I can boot into to TWRP, I can also get into FastBoot but can't find a Factory or any ROM for the matter that I can use to install an OS on the phone. Can anyone direct me to a TWRP flashable ROM?
Thank you all for the anticipate kind assistance with this.
Lineage OS can be installed through fastboot since it's a treble rom. Havent seen one that can be flashed through TWRP.
maverixz said:
Hello everyone,
I am currently at my wits end. I just got the Mate 10 Pro, rooted and TWRPed it after getting the OEM unlocker et al. Decided to try the LineageOS and ran into trouble there. Now I can boot into to TWRP, I can also get into FastBoot but can't find a Factory or any ROM for the matter that I can use to install an OS on the phone. Can anyone direct me to a TWRP flashable ROM?
Thank you all for the anticipate kind assistance with this.
Click to expand...
Click to collapse
Just flash the partion that you saved of system.img before you flashed lineage? ?
Sent from my HUAWEI BKL-L09 using XDA Labs
Thanks for your responses. After too many failed attempts to fix it myself, I invested in the Funkyhuawei software and fixed the phone.
maverixz said:
Thanks for your responses. After too many failed attempts to fix it myself, I invested in the Funkyhuawei software and fixed the phone.
Click to expand...
Click to collapse
...
I don't think that you know but there are other free alternatives offering same support as Funky Huawei but too late I guess
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
...
I don't think that you know but there are other free alternatives offering same support as Funky Huawei but too late I guess
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
I didn't hence the $65 investment with Funkyhuawei. Can you share as the license is for 30 days and with my getting rusty with the rooting and flashing skills, I may need such tools again.
Hi guys,
Can someone pls share stock recovery_ramdisk for honor view 10, emui 10,
Stuck in bootloop. Can't download 4.4gb only for one file.
Pls
mohsyn said:
Hi guys,
Can someone pls share stock recovery_ramdisk for honor view 10, emui 10,
Stuck in bootloop. Can't download 4.4gb only for one file.
Pls
Click to expand...
Click to collapse
If you are on EMUI10, then how would you flash it, considering that bootloader is locked on EMUI 10?
My bootloader and frp are both unlocked
mohsyn said:
My bootloader and frp are both unlocked
Click to expand...
Click to collapse
It doesn't matter, if you are on EMUI10 it won't let you flash anything.
Pretoriano80 said:
It doesn't matter, if you are on EMUI10 it won't let you flash anything.
Click to expand...
Click to collapse
Thanks bro
Realized that now
This is seriously my last huawei phone. Never again
Pretoriano80 said:
It doesn't matter, if you are on EMUI10 it won't let you flash anything.
Click to expand...
Click to collapse
So rooting with Magisk isn't possible anymore?
Dr.Linde said:
So rooting with Magisk isn't possible anymore?
Click to expand...
Click to collapse
Correct.