TWRP 3.2.3 for Galaxy Grand 2 SM-G7102 (updated)
How to Install :-
*Download img file & copy to sd card
*go to recovery
*Select install
*Select img file
*Flash
*Reboot
All credit goes to twrp builder team
Hit the thanks button if u like this work
Updated recovery
V - 3.2.3
https://www.androidfilehost.com/?fid=1395089523397913506
V - 3.2.2
https://www.androidfilehost.com/?fid=1395089523397913502
V-3.2.1
img file
https://www.androidfilehost.com/?fid=1395089523397913543
Flashable zip file
https://www.androidfilehost.com/?fid=1395089523397913492
Here is odin flashable .tar file
https://www.androidfilehost.com/?fid=1395089523397913487
Alternate link -
https://drive.google.com/file/d/1ByVthZxLOQz37CTAubEglL855RmsVHLz/view?usp=sharing
No bugs??? I mean if any problem exist in TWRP 3.2.1.0?
Dharmik Jain said:
No bugs??? I mean if any problem exist in TWRP 3.2.1.0?
Click to expand...
Click to collapse
Nope its fully stable without any bugs
Sachinbansal said:
Nope its fully stable without any bugs
Click to expand...
Click to collapse
Thanks man. You guys gave grand 2 a new life again. Thanks for the latest twrp recovery for grand 2.
Nice
Is there an ODIN flashable version?
.tar
SavageDamage said:
Is there an ODIN flashable version?
.tar
Click to expand...
Click to collapse
Flash this one via odin then update the twrp
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Sachinbansal said:
Flash this one via odin then update the twrp
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Click to expand...
Click to collapse
i cant install with Odin . Error
This is Odin Log :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> twrp 3.2.1.0.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
alirezahoooy said:
i cant install with Odin . Error
This is Odin Log :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> twrp 3.2.1.0.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Flash this one first and then update it in twrp by zip or img file
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Maybe you can make same TWRP for G7105-ms01lte, would be very nice.
fantomel said:
Maybe you can make same TWRP for G7105-ms01lte, would be very nice.
Click to expand...
Click to collapse
Sorry man i cant but i can tell u someone who can help u so pm me
Man!! Links are not working.. Plz update ur links...
I really need twrp for my g7102.. I'm trying to download twrp for my phone from 1 year.
Plz send a valid link.
Thank you.
Nadeemex said:
Man!! Links are not working.. Plz update ur links...
I really need twrp for my g7102.. I'm trying to download twrp for my phone from 1 year.
Plz send a valid link.
Thank you.
Click to expand...
Click to collapse
Bro links are working
No prob in the link
Big problem
Himan111999 said:
Bro links are working
No prob in the link
Click to expand...
Click to collapse
I got stuck in a big problem!!
Firstly after downloading the file.
I turned off the phone and pressed volume up +power+home key
I got a warning(u might know what is it) ⚠ screen
Then i clicked volume up so that i can flash the recovery img file but the screen showed
Downloading!!!!
I waited for 5 mins but nothg happened i just restrrted the phone and flash img file with OFFICIAL TWRP APP
And rebooted to recovery mode.. At top left corner of the screen i got showing BOOTING TO RRCOVERY
But i didn't get in twrp the phone just got restarted!!!
Now i cant even go to stock recovery. Phone gets restarted every time!!!
SUGGEST ME A WAY TO FLASH IMG THROUGH MY PHONE ITSELF WITHOUT PC
THANKS!!
:crying:
Try to flash twrp using flashify app
Deleted
Contact
Sachinbansal said:
Try to flash twrp using flashify app
Click to expand...
Click to collapse
Thanks! For concern
Nadeemex said:
Bhai!
+7731065308 mera whatsapp no. Hai. ek baar msg kardo mai aap ko sabkuch clearly samjhadunga
Ya aap apna no. Do!
Thanks! For concern
Click to expand...
Click to collapse
Msg me here on telegram
https://t.me/acharya21
acharya21 said:
Nope its fully stable without any bugs
Click to expand...
Click to collapse
Can you add a password option? Everyone can run twrp holding 3 buttons and get full access to filesystem Everyone can even brick device wiping system. It's a huge security hole, isn't it?
lek2018 said:
Can you add a password option? Everyone can run twrp holding 3 buttons and get full access to filesystem Everyone can even brick device wiping system. It's a huge security hole, isn't it?
Click to expand...
Click to collapse
I dont think that can be done in twrp for that we need red wolf recovery
Related
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
nandopires1989 said:
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
Click to expand...
Click to collapse
you may have to use the no wipe stock rom and start from scratch
Man, I cant even imagine how do I do that. Can u give me a north?
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
theidoctor said:
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
Click to expand...
Click to collapse
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
nandopires1989 said:
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
Click to expand...
Click to collapse
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Perfect! I will try it now!
Thank you very much!
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
nandopires1989 said:
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
Click to expand...
Click to collapse
Hello There! I think I made it...I already made the Root, and Im here right now (http://forum.xda-developers.com/showthread.php?t=2292112) , but Im experiencing some dificulties with this...I'm not developer...coul'd u help me with more this?
Thanks!
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
Hello,
I am trying to flash openrecovery-twrp-2.7.1.0-i9300.tar to my Galaxy S3 i9300 with Odin 3.09
The process seems to complete successfully and Odin shows a [PASS!] but once i reboot in recovery mode TWRP is not there
(i get a "android recovery mode <3e>" screen which i suppose is a vanilla/default recovery mode?).
PS. i have kies3 latest edition installed and windows7 x64 seem to indicate that all phone drivers are installed correctly.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
DarkNik said:
Hello,
I am trying to flash openrecovery-twrp-2.7.1.0-i9300.tar to my Galaxy S3 i9300 with Odin 3.09
The process seems to complete successfully and Odin shows a [PASS!] but once i reboot in recovery mode TWRP is not there
(i get a "android recovery mode <3e>" screen which i suppose is a vanilla/default recovery mode?).
PS. i have kies3 latest edition installed and windows7 x64 seem to indicate that all phone drivers are installed correctly.
Click to expand...
Click to collapse
Try again untick reboot in odin wait until it flashes switch phone off or pull battery and reboot manually Volume up + Home+Power see if that works.
Flash CWM first. After that you can try flash TWRP via odin or via recovery
tallman43 said:
Try again untick reboot in odin wait until it flashes switch phone off or pull battery and reboot manually Volume up + Home+Power see if that works.
Click to expand...
Click to collapse
I tried but even that yielded no results
verny94 said:
Flash CWM first. After that you can try flash TWRP via odin or via recovery
Click to expand...
Click to collapse
I am not familiar with CWM, i will be googling it now and see what i can find in case i need to proceed with it.
I found this CWM bundle that also has a version of odin that reportedly works with my i9300.
MEGA_CO_NZ link -> /#!csdzBRRb!V-ZDrGuVB29Ywq9tdE64BGGJwpNvHFibeS9TQ2y2p1o samsung-galaxy-s3-i9300-touch-cwm-odin.zip
followed the steps but boom even that was to no avail (i also tried to refollow the steps once with the no restart option @tallman43 mentioned.
DarkNik said:
I am not familiar with CWM, i will be googling it now and see what i can find in case i need to proceed with it.
Click to expand...
Click to collapse
A am not fan of CWM also. CWM (or Philz touch) will be only the way how to get TWRP
I accidentally used the wrong file to root on my 5.1.1 t-mobile s6 and it got the "RECOVERY IS NOT SEANDROID ENFORCING"
I can only on download mode .
So I tried to re-root by using the 5.1.1 version and it still got the same error. Stupid, I know
I did some google search and I found out that I need to flash to stock firmware, so I tried.
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help.
This is the log of ODIN (3.10)
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
after i used a recovery file it's not showing any more" RECOVERY IS NOT SEANDROID ENFORCING" but still can"t use the phone any more .
plssss help
I'm getting the same error. Very annoying!
I would say try this here http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
it was another topic
Skhulile said:
I would say try this here http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
Click to expand...
Click to collapse
It was someone else that had the same problem "http://forum.xda-developers.com/ga...r file from ADB or fastboot.
Thx for ur help.
sunnyce said:
It was someone else that had the same problem "http://forum.xda-developers.com/ga...lve the problem???? i have the same issue....
Click to expand...
Click to collapse
idn1984 said:
hi dude,
did you manage to solve the problem???? i have the same issue....
Click to expand...
Click to collapse
try flashing the right file of TWRP and should get u in recovery. from there u should be able to install a custom rom using ADB or FASTBOOT.
sunnyce said:
try flashing the right file of TWRP and should get u in recovery. from there u should be able to install a custom rom using ADB or FASTBOOT.
Click to expand...
Click to collapse
thanks man, after installing the latest TWRP i was able to open recovery and install custom rom,
help
idn1984 said:
thanks man, after installing the latest TWRP i was able to open recovery and install custom rom,
Click to expand...
Click to collapse
hey mate how where u able to install a custom rom because I can't connect on the ADB sideloader and i am able to push a file but still can't install it . IT says fail .
what do u think i am doing wrong ?
What error is it? What are you trying to install
Skickat från min SM-G925F via Tapatalk
my s6 edge is bricked from failed root and when i try to install firmware i get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
DevonSweeney said:
my s6 edge is bricked from failed root and when i try to install firmware i get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I also tryed to root my phone and now im also stuck with this error message when i try to fix it.
Witch Rom do you come from and witch Rom do you try to flash ?
edzamber said:
Witch Rom do you come from and witch Rom do you try to flash ?
Click to expand...
Click to collapse
well, im kinda a noob at this stuff so im not sure, but if you meant what firmware then its 5.1.1,
add me on skype if you would like to help me more please "@[email protected]"
I think you have try to flash a Rom with old bootloader, thats why odin fail at Sboot part (bootloader). Try to dl and flash last Rom for your device (at least COI9).
Sorry, no Skype user...
edzamber said:
I think you have try to flash a Rom with old bootloader, thats why odin fail at Sboot part (bootloader). Try to dl and flash last Rom for your device (at least COI9).
Sorry, no Skype user...
Click to expand...
Click to collapse
Im sorry but that makes no sense to me, is there a way you can give me a quick tutorial, i am a noob
Ok, no worries
What is your S6 edge model (g925f, g925i...)?
edzamber said:
Ok, no worries
What is your S6 edge model (g925f, g925i...)?
Click to expand...
Click to collapse
SM-G925F
Great, witch location/region ?
I mean witch country ?
For exemple, I'm on G925F France.
I need this information to give you a link...
edzamber said:
Great, witch location/region ?
I mean witch country ?
For exemple, I'm on G925F France.
I need this information to give you a link...
Click to expand...
Click to collapse
SM-G925F Northern Ireland
But Northern Ireland Is Kinda Part Of The UK
Ok.
I think you have to install last UK COI9.
Here is link to dl on Sammobile.com. If you havn't an account, register for free to dl.
http://www.sammobile.com/firmwares/download/57658/G925FXXU3COI9_G925FBTU3COJ1_BTU/
Then, extract firmware zip with 7zip on your Desktop.
If there is only one file, flash it into AP
If there is 4 files :
BL file in BL
AP file in AP
CSC file in CSC
Modem file in CP
Let me know
edzamber said:
Ok.
I think you have to install last UK COI9.
Here is link to dl on Sammobile.com. If you havn't an account, register for free to dl.
http://www.sammobile.com/firmwares/download/57658/G925FXXU3COI9_G925FBTU3COJ1_BTU/
Then, extract firmware zip with 7zip on your Desktop.
If there is only one file, flash it into AP
If there is 4 files :
BL file in BL
AP file in AP
CSC file in CSC
Modem file in CP
Let me know
Click to expand...
Click to collapse
can i use winrar? and can you link me to odin, an odin which you would use please?
Yes Winrar working too.
Here is Odin i use :
http://www.mediafire.com/?x3lefbe2uu8hv8f
edzamber said:
Yes Winrar working too.
Here is Odin i use :
http://www.mediafire.com/?x3lefbe2uu8hv8f
Click to expand...
Click to collapse
thanks so much for the help so far, lets hope it works!!
You're welcome.
Let me know
edzamber said:
You're welcome.
Let me know
Click to expand...
Click to collapse
so i just put my phone into download mode, add it to odin.
then load the file inside the zip file into the AP?
correct?
* Extract Rom file.tar.md5 from Rom zip on your desktop with Winrar
* Open Odin as administrator
* In case of one single AP file, clic on AP into Odin and add AP file to load in
* Wait until odin load AP file
* Start in Download mode
* Plug usb cable
* When you see a number under COM into odin is add, clic on Start
edzamber said:
* Extract Rom file.tar.md5 from Rom zip on your desktop with Winrar
* Open Odin as administrator
* In case of one single AP file, clic on AP into Odin and add AP file to load in
* Wait until odin load AP file
* Start in Download mode
* Plug usb cable
* When you see a number under COM into odin is add, clic on Start
Click to expand...
Click to collapse
ODIN said that it passed, but now it only turns on when plugged in and when it is plugged in it is stuck in a sequence of: samsung s6 edge logo, blue screen with android logo, turn off. and then repeats over and over, i am able to go into download mode though
Go in recovery and wipe factory reset.
edzamber said:
Go in recovery and wipe factory reset.
Click to expand...
Click to collapse
i cant get into recovery mode i dont think, i can only get into download mode. And i cant turn it on when it isnt plugged in and i cant turn it off when it is
UPDATE: got into recovery mode and factory reset. thank you so much, your a lifesaver! if i get money in the near future i will be donating!!!!